Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 258 views

    BCU Line - 6MD85

    Uploaded by

    PằngPằngChiuChiu
    The document summarizes the configuration of a 6MD85 Bay Controller device with the following key details: 1. The device has 59 binary inputs, 33 relays, and supports 4 current and 4 voltage transformers. 2. Communication modules include an Ethernet port for DIGSI 5 and a 2-port Ethernet module. 3. The function point class is base plus 50 points, and activated functions include synchrocheck, overcurrent protection, and automatic voltage control for two-winding transformers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    BCU Line - 6MD85

    Uploaded by

    PằngPằngChiuChiu
    258 views5 pages
    The document summarizes the configuration of a 6MD85 Bay Controller device with the following key details: 1. The device has 59 binary inputs, 33 relays, and supports 4 current and 4 voltage transformers. 2. Communication modules include an Ethernet port for DIGSI 5 and a 2-port Ethernet module. 3. The function point class is base plus 50 points, and activated functions include synchrocheck, overcurrent protection, and automatic voltage control for two-winding transformers.

    Original Title

    BCU Line_6MD85

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the configuration of a 6MD85 Bay Controller device with the following key details: 1. The device has 59 binary inputs, 33 relays, and supports 4 current and 4 voltage transformers. 2. Communication modules include an Ethernet port for DIGSI 5 and a 2-port Ethernet module. 3. The function point class is base plus 50 points, and activated functions include synchrocheck, overcurrent protection, and automatic voltage control for two-winding transformers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    258 views5 pages

    BCU Line - 6MD85

    Uploaded by

    PằngPằngChiuChiu
    The document summarizes the configuration of a 6MD85 Bay Controller device with the following key details: 1. The device has 59 binary inputs, 33 relays, and supports 4 current and 4 voltage transformers. 2. Communication modules include an Ethernet port for DIGSI 5 and a 2-port Ethernet module. 3. The function point class is base plus 50 points, and activated functions include synchrocheck, overcurrent protection, and automatic voltage control for two-winding transformers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    SIPROTEC 5

    Configuration
    Aug 18, 2020 7:59 AM

    Device: 6MD85 Bay Controller

    Product code
    Short: P1G153092
    Long: 6MD85-DAAA-AA0-0AAAA0-AF0111-23111B-AAA000-000AC0-CB3BA1-CG0CG0-CG0

    Firmware: Current version


    Housing width: 5/6 x 19''
    Housing type: Flush mounting
    Binary inputs: 59
    Binary outputs: 33 Relays (27 Standard, 6 Fast, 0 High-Speed, 0 Power)
    Current transformers: 0 for protection
    4 for measurement and sensitive ground-current detection
    Voltage transformers: 4 standard
    Measuring-transducer inputs: 0 (20 mA or 10 V, fast)
    0 (20 mA, standard)
    CPU: CP300
    Modules in 19" row 1: IO202 , PS201 , IO207 , IO207 , IO207
    Modules in 19" row 2:
    LEDs/Push-buttons: 32 LEDs
    Operation Panel: Integrated
    Key switch: Without
    Display type: Large display
    Front Design: Standard
    Power Supply: DC 60 V-250 V, AC 100 V-230 V
    Redundant Power Supply: No

    Communication/Plug-in modules:
    Communications encryption: Normal
    Integrated Ethernet port J: for DIGSI 5
    Plug-in module position E: ETH-BA-2EL: 2x electric Ethernet 100 Mbit/s, RJ45 Communication Protocols:
    applicable for DIGSI 5, IEC 61850-8-1 MMS and GOOSE, IEC 60870-5-104,
    DNP3 TCP, Modbus TCP, Synchrophasor (IEEE C37.118 - IP), Profinet IO, SUP,
    DHCP, SNTP, SNMP, etc. Redundancy protocols: Line Mode, RSTP, HSR, PRP
    Plug-in module position F: Port is available but not assembled
    SIPROTEC 5
    Configuration
    Aug 18, 2020 7:59 AM

    Functions:
    Function points class: Base + 50 function points

    Note on function-points class


    The function-points class results from the sum of the function points of the selected functions. You can apply these
    functions as selected. The device allows also each other selection of functions as long as the sum of the required
    function points is within the selected function-points class. With the maximum function-points class of 1400 it is
    possible to activate all the functions in the device. The function-points exceeding 1400 are free of charge. In the
    engineering phase DIGSI 5 checks that the selected configuration is suitable (capable of running in the device) before
    loading it to the device.

    Miscellaneous:
    Warranty: 5 years
    Firmware: Current version
    SIPROTEC 5
    Configuration
    Aug 18, 2020 7:59 AM

    Functional scope 6MD85 Bay Controller:


    Always Add selected Result
    ANSI Function Abbr. included Qty. x Value = Points Qty.
    Protection functions for 3-pole tripping 3-pole

    Hardware quantity structure expandable I/O

    Process Bus Client Protocol (Note: This PB client x 100 =


    function requires at least one dedicated
    ETH-BD-2FO plug-in module, with
    V8.0)
    IEC61850-9-2 Merging Unit stream MU x 200 =
    (Note: This function requires a
    dedicated ETH-BD-2FO per stream,
    with V8.0)
    25 Synchrocheck, synchronization function Sync 1 x 50 = 50 1x
    27 Undervoltage protection: "3-phase" or V< x 5 =
    "universal Vx"
    27R, Rate-of-voltage-change protection (from dV/dt x 5 =
    59R V8.30)
    32, 37 Power protection active/reactive power P<>, x 10 =
    Q<>
    38 Temperature supervision >

    46 Negative-sequence overcurrent I2> x 10 =


    protection
    49 Thermal overload protection , I²t

    50/51 Overcurrent protection, phases I> x 20 =


    TD
    Instantaneous tripping at switch onto SOTF
    fault
    50HS Instantaneous high-current tripping I>>>

    50N/ Overcurrent protection, ground IN> x 20 =


    51N TD
    51V Overcurrent protection, voltage t=f(I,V) x 10 =
    dependent
    59 Overvoltage protection: "3-phase" V> x 5 =
    or "positive-sequence system V1" or
    "universal Vx"
    67 Directional overcurrent protection, I>, (V,I) x 35 =
    phases
    SIPROTEC 5
    Configuration
    Aug 18, 2020 7:59 AM

    Functional scope 6MD85 Bay Controller:


    Always Add selected Result
    ANSI Function Abbr. included Qty. x Value = Points Qty.
    67N Directional overcurrent protection, IN>, (V,I) x 35 =
    ground
    74TC Trip-circuit supervision TCS

    74CC Closed-circuit supervision (from V7.9) CCS x 5 =


    81 Frequency protection: "f>" or "f<" or "df/ f<>; df/ x 5 =
    dt" dt<>
    81U Underfrequency load-shedding f<(UFLS) x 15 =
    86 Lockout

    90V Automatic Voltage controller for two- x 150 =


    winding transformer
    90V Automatic Voltage controller for two- x 180 =
    winding transformer with parallel
    operation
    Number of two-winding transformers 2x x 5 = 2x
    with parallel operation (Note: only
    together with the function "Automatic
    Voltage controller for two-winding
    transformer with parallel operation")
    90V Automatic Voltage controller for three- x 200 =
    winding transformer
    90V Automatic Voltage controller for grid x 175 =
    coupling transformer
    PMU Synchrophasor measurement PMU x 40 =
    AFD Arc-protection (only with plug-in module
    ARC-CD-3FO)
    Measured values, standard

    Measured values, extended: Min, Max, x 3 =


    Avg
    Basic PQ measurements: THD and
    harmonics (from V8.01)
    Switching statistic counters

    Circuit-breaker wear monitoring Ix, I²t, 2P x 10 =


    CFC (Standard, control)

    CFC arithmetic x 40 =
    SIPROTEC 5
    Configuration
    Aug 18, 2020 7:59 AM

    Functional scope 6MD85 Bay Controller:


    Always Add selected Result
    ANSI Function Abbr. included Qty. x Value = Points Qty.
    Switching sequences function x 5 =
    Inrush current detection

    External trip initiation

    Control

    Circuit-breaker 4x x 3 = 4x
    Disconnector/Grounding switch 4x x 3 = 4x
    Fault recording of analog and binary
    signals
    Monitoring and supervision

    Protection interface, serial

    Frequency-tracking groups (from V7.8)

    Temperature acquisition via


    communication protocol
    Cyber Security: Role-Based Access x 25 =
    Control (from V7.8)
    Sum: 50

    You might also like