B680H

Automatic Barriers

Automatic 24V Hybrid Barrier

Max beam length

2-8m
Opening time

1,5 - 6 s
Use frequency • 2,000,000 cycles thanks to the Brushless + Hydraulic motor and “unlimited” springs.
• Removable cabinet available in 4 colours or stainless steel.
• High logistic optimization: a single barrier model suitable for all lengths.
http://faac.ec/vb680hit
Continuous use

DIMENSIONS AND TECHNICAL SPECIFICATIONS

Model B680H
Power supply voltage Switching: 100 ÷ 240V~ 50/60 Hz
Motor Brushless 36V
Motor rotation speed 1000 ÷ 6000 rpm
Max. power 240 W
Motor-pump unit capacity 3.2 lpm
Material type Steel
Type of treatment 100 micron protective primer + polyester painting or stainless steel cabinet
Encoder Magnetic absolute encoder
Type of deceleration Electronic - via encoder
Type of beam Round
Operating ambient temperature -20°C ÷ +55°C
Protection class IP56 (TÜV certified)
Weight 85 Kg (65 Kg pillar + 20 Kg cabinet)
Type of oil FAAC HP OIL
Dimensions (LxDxH) 469 x 279 x 1100 mm
Beam max length 2÷8m
Opening time 1,5 s (90° - 2m) - 6 s (90° - 8m)
Use frequency 100%
Electronic equipment E680

138
 FAMILY MODELS PACKS
Model Item code B680H includes: barrier cabinet with electronic equipment and absolute
encoder, hydraulic drive transmission system, installation accessories,
B680H Cabinet 104680
triangular release key.
DOES NOT include beam bracket, balancing spring (sold together with
another code) and the cabinet.

Typical Installation Examples page. 348

ELECTRONIC CONTROL UNITS CABINETS

E680 electronic control Red cabinet RAL 3020 Cabinet Cabinet

unit Blue RAL 5011 White RAL 9010
Info at page 166For further information

63000128 416016 416017 416018

>>

Cabinet Stainless steel cabinet

Grey RAL 9006

416019 416020

PIVOTING ROUND BEAMS AND SPECIFIC ACCESSORIES

Length (mm) Item code
2.500 428175
3.000 428176
It is not possible to install skirt kits, end foot and fork on the new round
pivoting beams.
Pivoting round beams
Beam bracket for S Spring
pivot round beam - (required for round
(STAINLESS STEEL) pivoting beams)

428163 63000169

>>

Break-in sensor for

pivoting round beams

390828

139
 B680H
Automatic Barriers

BEAMS S: UP TO 5 M PASSAGE WIDTH

Accessories for round beams S based on the
Lights Skirt End foot
effective span of the passage
up to 4.5 m X X X
from 4.5 m to 5 m X
from 4.5 m to 5 m modular (with collar assembly)
Pocket and balancing
S spring • All beams are provided with protective rubber on the lower side and provision for lights on the upper side. The
adhesive reflectors are not included.
• The beam profiles have a 75 mm round section in order to be effective also in windy areas.
428436 • The joint of the modular beams is invisible after installation.

WHOLE BEAMS S
Model Item code
Whole Beam S 2.3 m 428045
Whole Beam S 3.3 m 428042
Whole Beam S 4.3 m 428043
Whole Beam S 5.3 m 428044

MODULAR BEAMS S
Model Item code
Joint S 428615
Initial Beam S 2.3 m 428045
Initial Beam S 3.3 m 428042
Final Beam S 2 m 428046

BEAMS L: FROM 5 M UP TO 8 M PASSAGE WIDTH

Accessories for round beams L based on the
Lights Skirt End foot
effective span of the passage
from 5 m to 7 m X X X
from 7 m to 7.5 m X X (without end foot) X (without skirt)
from 7.5 m to 8 m X X
Pocket and balancing
L spring • All beams are provided with protective rubber on the lower side and provision for lights on the upper side. The
adhesive reflectors are not included.
• The beam profiles have a 85 x 95 mm elliptical section in order to be effective also in windy areas.
428437 • The joint of the modular beams is invisible after installation.

WHOLE BEAMS L
Model Item code
Whole Beam L 5.3 m 428047

MODULAR BEAMS L
Model Item code
Joint L 428616
Initial Beam L 4 m 428048
Final Beam L 2.3 m 428049
Final Beam L 3.3 m 428050
Final Beam L 4.3 m 428051

140
COMMON ACCESSORIES FOR ALL APPLICATIONS

Foundation plate Skirt kit length 2 m t Skirt kit length 3 m t Adjustable fork for Fork support Support plate for fork
beam support Discontinuing
From April 2017

490139 428441 428446 428806 728487 737621

>>

Adjustment screws for Adjustable end foot for End pivoting foot t Articulated kit for Integrated flashing Round beam light
fork support beam support t Discontinuing round beam S (max traffic light t connection kit S/L t
Discontinuing From April 2017 4 m)

728488 428805 428442 428444 410022 390992

>>

Luminous cord 12 m XBAT 24 emergency XBAT connection kit Adhesive reflector kit Supplementary Release lock with
pack t battery kit (to be ordered with triangular release key customised key for
390923) (10 pcs. pack) cod. 390035

390993 390923 390080 490117 713002 71209101-36

>> NOTE
t For correct balancing, installing an end foot on a beam and on a beam with skirt requires a barrier
cabinet for a beam length greater than 0.5 m.
t It is also possible to connect the FAACLED 24V external flashing light
t For correct balancing, installing lights on a round beam and a round beam with skirt for lengths greater
than 2,800 mm requires a barrier cabinet for a beam length greater than 0.5 m.
t The anti-panic unit and the anti-vandal valve cannot coexist on the same barrier. It allows manual
Anti-vandal valve Anti-panic unit t opening of the beam in case of power cut.
protects the hydraulic
system if the beam is
forced
401069 401051

OTHER Key operated Safety devices Transmitters and Photocells and Flashing lights Various
buttons page 190 receivers columns page 197 accessories
ACCESSORIES page 178 page 170 page 186 page 198

141