The W22 Super Premium line presents very high efficiency, and offer the widest range of motors in the world with such performance level. They present electric losses 20 to 40% smaller in comparison to the conventional electric motors.
They are asynchronous motors that comply with the IE4 efficiency level, specified by IEC 60034-30-1, and exceed the efficiency level established by the European Regulation, providing a fast payback.
Product features
Standard IEC 60034-1
Frequency 50 Hz
Voltage 400/690//460 V
Number of poles 4
Degree of Protection IP55
Synchronous speed 1500 rpm
Output rating 132 kW
Mounting Foot-mounted Flange Without
Mounting B3T
Terminal box¹ Top
Enclosure IC411 - TEFC
PRODUCT DETAILS Technical Data
400/690 V 50 Hz 4P 460 V 60 Hz 4P
Electric Motors
Frame 315S/M
Output 132 kW
Number of Poles 4
Frequency 50 Hz
Rated speed 1490 rpm
Slip 0.67 %
Rated voltage 400/690 V
Rated current 229/133 A
L. R. Amperes 1718/1000 A
LRC 7.5
No load current 84.2/48.8 A
Rated torque 86.3 kgfm
Locked rotor torque 280 %
Breakdown torque 270 %
Locked rotor time 90s (cold) 50s (hot)
Moment of inertia (J) 5.29 kgm²
Design N
Insulation Class F
Service factor 1.00
Temperature rise 80 K
Duty Cycle S1
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting B3T
Rotation¹ Both (CW and CCW)
Noise level² 71.0 dB(A)
Approx. weight³ 1321 kg
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.
Efficiency
50% 75% 100%
96.1 96.7 96.9
Power factor
50% 75% 100%
0.73 0.82 0.86
Features
Frame Material Cast Iron
Impregnation Method Constant Resin Flow
Regreasing System At Drive end and Non-drive
end
Main terminal box hole 2xM63x1,5
Terminal Block BMC - 6 pins
Shaft Locking Device Without
Drain Rubber, automatic
Shaft Material SAE 1040/45 Carbon
Steel
Painting RAL 6002 203A (ISO
12944 - C2)
Grounding Lugs Double
Fan Cover material Cast Iron
Tropicalized Painting Without
Fan material Plastic
Bearing cap Yes- Bearing Cap
Winding thermal protection Thermistor - 2 wires 1 per
phase 155°C
Drip Cover Without
Overload protector (phenolic) Without overload protector
ABOUT THIS PRODUCT
Energy Efficiency Each kilowatt hour saved in a production activity can be used for the production of other goods and services, and the money saved in energy is an additional resource for investment in innovation and productivity gains.
The W22 motor, in addition to offering efficiency and savings for your plant, has many other advantages; check them out below.
Ventilation System The ventilation system design of the W22 line provides lower noise levels and allows a better distribution of the air flow over the motor, which minimizes hot spots on the surface and increases reliability and useful life.
◾ The fan cover made of cast iron offers greater impact resistance IEC 160 / NEMA 254T and larger and all IEEE 841 (143T-215T standard W22 are heavy gauge stamped Steel) ◾ Terminal box and eyebolts positioned so as to reduce the air flow dispersion ◾ Lower operating temperature on the bearings, resulting in longer lubrication intervals Frame The frame design reduces the air flow dispersion and contributes to increased heat exchange between the motor and the environment, reducing hot spots on the frame surface and extending the bearing lubrication intervals.
◾ Eyebolts ◾ Specific places to install vibration sensors starting with frame IEC 160 / NEMA 254T
Endshields Designed to improve the cooling and provide lower operating temperatures of the bearing, in addition to extending lubrication intervals.
D-Endshield
◾ Bearing hub displaced toward the outside of the endshield
◾ Lower operating temperature ◾ Robust structure to minimize vibration and increase heat dissipation
ND-Endshield
◾ Optimized air flow
◾ Reduction of noise levels ◾ Robust structure to minimize vibration
Terminal Box The increase in the internal space of the terminal box simplifies the access to the terminals, ensuring easy and safe electrical connections during the installation and maintenance of the motor.
◾ The connection system of the terminal box allows easy modification of the motor mounting on the larger frames (IEC 225 / NEMA 447T and above), reducing the time to perform the change and the number of motors in stock.
