MC34063A/MC33063A: SMPS Controller

www.fairchildsemi.
com
MC34063A/MC33063A
SMPS Controller
Features Description
• Operation from 3.0 to 40V input The MC34063A/MC33063A is a monolithic regulator sub
• Short circuit current limiting system intended for use as DC to DC converter. This device
• Low standby current contains a temperature compensated bandgap reference, a
• Output switch current of 1.5A without external transistors duty cycle control oscillator, driver and high current output
• Output voltage adjustable switch. It can be used for step down, step up or inverting
• Frequency of operation from 100Hz to 100KHz switching regulators as well as for series pass regulators.
• Step up, Step down or inverting switching regulators
8-DIP
8-SOP
Internal Block Diagram
Rev. 1.0.2
©2001 Fairchild Semiconductor Corporation
MC34063A/MC33063A
Absolute Maximum Ratings

Parameter Symbol Value Unit
Supply Voltage VCC 40 V
Comparator Input Voltage Range VI(COMP) - 0.3 ~ + 40 V
Switch Collector Voltage VC(SW) 40 V
Switch Emitter Voltage VE(SW) 40 V
Switch Collector To Emitter Voltage VCE(SW) 40 V
Driver Collector Voltage VC(DR) 40 V
Switch Current ISW 1.5 A
Storage Temperature Range TSTG - 65 ~ + 150 °C
Electrical Characteristics
(VCC = 5.0V, TA = 0°C to +70°C for the MC34063, TA= -40°C to the +85°C for the MC33063, unless otherwise
specified)
Parameter Symbol Conditions Min. Typ. Max. Unit

OSCILLATOR
VCC = 5 to 40V
Charging Current ICHG 22 31 42 µA
TA = 25°C
VCC = 5 to 40V
Discharging Current IDISCHG 140 190 260 µA
TA = 25°C
Oscillator Amplitude V(OSC) TA = 25°C - 0.5 - V
Discharge To Charge Current Ratio K V7 = VCC , TA = 25°C 5.2 6.1 7.5 -
Current Limit Sense ICHG = IDISCHG
VSENSE(C.L) 250 300 350 mV
Voltage TA = 25°C
OUTPUT SWITCH
ISW = 1.0A
Saturation Voltage 1 (Note) VCE(SAT)1 - 0.95 1.3 V
VC(driver) = VC(SW)
ISW = 1.0A,
Saturation Voltage 2 (Note) VCE(SAT)2 - 0.45 0.7 V
VC(driver) = 50mA
ISW = 1.0A,
DC Current Gain (Note) GI(DC) 50 180 - -
VCE = 5.0V, TA = 25°C
Collector off State Current (Note) IC(OFF) VCE = 40V, TA = 25°C - 0.01 100 µA
COMPARATOR
Threshold Voltage VTH - 1.21 1.24 1.29 V
Threshold Voltage Line Regulation ∆VTH VCC = 3 to 40V - 2.0 5.0 mV
Input Bias Current IBIAS VI = 0V - 50 400 nA
TOTAL DEVICE
Supply Current VCC = 5 to 40V
MC34063 CT = 0.001uF - - 4.0
ICC mA
V7 = VCC, V5>VTH
MC33063 pin2 = GND - - 5.0
Note :
Output switch tests are performed under pulsed conditions to minimize power dissipation
2
MC34063A/MC33063A
Typical Performance Characteristics
Temperature (°C) Temperature (°C)

Figure 1. Temperature Drift (VTH) Figure 2. Temperature Drift (IOC)
3
MC34063A/MC33063A
Mechanical Dimensions
Package
8-DIP
)
6.40 ±0.20
0.031
0.79
0.252 ±0.008
1.524 ±0.10
0.060 ±0.004
0.018 ±0.004
0.46 ±0.10
(
#1 #8
0.362 ±0.008
MAX
9.20 ±0.20
0.378
9.60
#4 #5
0.100
2.54
5.08 3.30 ±0.30
MAX 0.130 ±0.012
0.200
7.62
0.300 3.40 ±0.20 0.33
MIN
0.134 ±0.008 0.013
+0.10
0.25 –0.05
+0.004
0.010 –0.002
0~15°
4
MC34063A/MC33063A
Mechanical Dimensions (Continued)

Package
8-SOP
0.1~0.25
MIN
0.004~0.001
1.55 ±0.20
0.061 ±0.008
)
0.022
0.56
(
#1 #8
0.194 ±0.008
MAX
4.92 ±0.20
0.202
5.13
0.016 ±0.004
0.41 ±0.10
#4 #5
0.050
1.27
6.00 ±0.30 1.80
0.236 ±0.012 MAX
0.071
0.006 -0.002
0.15 -0.05
MAX0.004
MAX0.10
3.95 ±0.20
+0.004
+0.10
0.156 ±0.008
8°
5.72
0~
0.225
0.50 ±0.20
0.020 ±0.008
5
MC34063A/MC33063A
Ordering Informatio
Product Number Package Operating Temperature
MC34063AP 8-DIP
0 ~ + 70°C
MC34063AD 8-SOP
MC33063AP 8-DIP
-40 ~ + 85°C
MC33063AD 8-SOP
6
MC34063A/MC33063A
7
MC34063A/MC33063A
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support
which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be
or (b) support or sustain life, and (c) whose failure to reasonably expected to cause the failure of the life support
perform when properly used in accordance with device or system, or to affect its safety or effectiveness.
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
www.fairchildsemi.com
6/21/01 0.0m 001

Stock#DSxxxxxxxx
 2001 Fairchild Semiconductor Corporation

MC34063A/MC33063A: SMPS Controller

Uploaded by

Copyright:

Available Formats

MC34063A/MC33063A: SMPS Controller

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MC34063A/MC33063A: SMPS Controller

Uploaded by

Copyright:

Available Formats

www.fairchildsemi.

Internal Block Diagram

Absolute Maximum Ratings

Parameter Symbol Conditions Min. Typ. Max. Unit

Typical Performance Characteristics

Temperature (°C) Temperature (°C)

Mechanical Dimensions (Continued)

LIFE SUPPORT POLICY

6/21/01 0.0m 001

You might also like