JFE SAWL PIPE

Contents

Introduction..................................................................... 1
Pipe Manufacturing Process........................................... 2
Overview of the manufacturing process..................... 2
West Japan Works (Fukuyama) Pipe Mill....................... 4
History................................................................................ 5
Manufacturing process of SAWL pipe.......................... 6
SAWL Pipe Production Equipment................................ 8
Inspection and Test of SAWL Pipe................................10
Ultrasonic inspection of plates.................................... 10
Ultrasonic inspection of welds..................................... 10
X-ray inspection (Radiographic inspection).............. 11
Pipe end magnetic particle inspection...................... 11
Hydrostatic test............................................................... 12
Dimensional inspections.............................................. 12
Mechanical test............................................................... 13
Coating...........................................................................14
External Coating............................................................. 14
Internal Coating.............................................................. 14
Specifications.................................................................15
Available Size Range.....................................................16
Steel Solution for Energy..............................................16
Introduction
JFE Steel Corporation takes full advantage of advanced technologies, a wealth of experience acquired
over many years, and state-of-the-art facilities to meet customer needs for high grade, high quality pipes.
We produce a complete line of tubular products in a wide size range, and have an ample production
capacity.
Among the many pipe and tubular products which JFE Steel produces, this catalog features large
diameter welded pipes manufactured by SAWL methods, i.e. the UOE process and press bending
(NEO Press™) process. SAWL means Longitudinal submerged arc-welding.

We produce pipes with following features ;

- odd size pipe in addition to standard outside diameter pipe,
- heavy wall thickness pipe,
- high grade pipe up to grade X100.

All JFE Steel products are manufactured by an integrated production system under strict quality control.
JFE SAWL pipes including UOE pipes and NEO Press™ pipes meet even your most specialized requirements
in a variety of applications, including high tensile strength line pipe for gas and petroleum transportation,
pipes for power plants and chemical plants, pipes for waterworks/sewerage, structural pipe for offshore
platform and building, and steel pipe piles. These products are used in Japan and overseas, and have
earned an outstanding reputation for quality, economy, and service.

1
 Pipe Manufacturing Process
Overview of the manufacturing process
JFE Steel is one of the world’s preeminent integrated integrated production sites, Kurashiki and Fukuyama.
steel makers, and manufactures and supplies virtually JFE Steel also has a specialty pipe mill at Chita Works.
all types of steel products. JFE Steel’s East Japan Pipe manufacturing is performed under totally
Works includes two integrated production sites, Chiba controlled conditions from the starting material through
and Keihin, both located near Tokyo. West Japan the finished product, using outstanding technology and
Works, in western Japan, also consists of two large state-of-the-art equipment, as shown below.

Iron making Steel making

Coal Iron ore Limestone

Alloy Ar, Ca

Sintering plant Slag removal Arc process

Hot metal heat Continuous casting machine

Coke oven treatment (Slab, billet)

Basic oxygen
furnace

Dephosphorization
Powder Vacuum Calcium
injection degassing station

Blast furnace Ladle treatment

VAD VOD
Desulfurizer
Ingot Soaking
teeming pit

Slag

Electric furnace
Desiliconization

Scrap

2
 Rolling Product

UOE pipe
UOE pipe mill
Reheating
furnace Plate mill

Press bending mill

Bending pipe
Roller bending mill

Spiral pipe
Spiral weld pipe mill
Hot strip mill

Electric resistance
HFW* pipe
weld pipe mill

Electric induction weld *HFW : High frequency

pipe mill welded

Slabbing Butt welded pipe

(Blooming)
mill Continuous butt weld pipe mill

Plug mill
Rotary hearth Hot finished
Billet mill reheating furnace seamless pipe
Cold finished
Mandrel mill seamless pipe
Cold drawing
pipe mill

3
 West Japan Works (Fukuyama) Pipe Mill

Nippon Kokan Fukuyama Hospital

East Gate
Fukuyana Area Layout Sarayama Viewpoint
Education Center

Steel Research
Asahigaoka Gymnasium Laboratory Kasaoka Gate
Asahigaoka Community Center Calcination Plant
General Administration Ryogoku Bridge JFE Chemicals Corporation
20 Year Anniversary
Annex Office Power Plant West Japan Manufacturing Unit
Memorial Ground
Central Gate Shin Ryogoku Bridge Kasaoka Factory
West Gate Main Gate
Electronic Galvanizing Mill Electrolytic Central Substation JFE Setonaikai
Continuous Galvanizing Mill Tinning Mill Energy Center Golf Club
Gas Storage Tank External Coating Plant
Cold Strip Mill Oxygen Plant
Product Warehouse Coal Yard Product Quay
Coke Plant
No.1 Welding Pipe Mill
No.1 Hot Strip Mill (UOE Press Pipes)
Shipment Quay F Berth Internal Coating Plant
(Domestic) No.2 Blast Furnace
Plate Mill
No.3 Blast Furnace
Coal Yard E Berth
Product Warehouse
No.4 Blast Furnace

Shipment Quay No.2 Steelmaking Plant

(Export)
Large Shape Mill
No.5 Blast Furnace
B Berth

3,600m
No.5 Continuous Castor No.4 Sintering Plant
No.2 Hot Strip Mill
Iron Ore Yard
A Berth
Cold Strip Mill No.3 Steelmaking Plant No.5 Sintering Plant
Electronic Galvanizing Mill

Continuous Galvanizing Mill

Fukuyama Coke Plant
Product Warehouse
Iron Ore Yard L Berth
Product Quay

M Berth
■Factory Area： 3,507 acres
● Fukuyama 2,223 acres
● Kasaoka 1,284 acres
S Berth

2,800m

4
 History

February 1965 Nippon Kokan Fukuyama Works established

February 1968 Started operations of plate mill

February 1970 Started operations of UOE mill

May 1971 Obtained JIS G 3457 (STPY), and JIS G 3444 (STK) certifications

September 1971 Started operations of internal coating mill

August 1977 Started operations of external coating mill

April 1990 Obtained API 5L certification (shifted from API 5LX)

April 1991 Obtained API 2B certification

November 1993 Obtained ISO9001 certification

July 1997 Started operations of column fabrication shop

September 1997 Obtained ISO14000 certification

November 2000 Reached cumulative production of 9million tons

April 2003 JFE Steel Corporation established

October 2003 Reached cumulative production of 10 million tons

January 2007 Reached cumulative production of 11 million tons

August 2009 Stopped operations of column fabrication shop

July 2010 Reached cumulative production of 12 million tons

July 2011 Stopped operations of Chiba UOE Mill

October 2011 Started operations of Press Bending (NEO Press™) process

October 2013 Reached cumulative production of 13 million tons

April 2018 Reached cumulative production of 14 million tons

5
 Manufacturing process of SAWL pipe Fukuyama SAWL Production Flow
Pipes are manufactured at the Fukuyama SAWL pipe
mill by the following series of processes, as shown in
the flow chart at the right:

1 Preparatory processes for pipemaking * Plate ultrasonic inspection

(edge preparation, crimping press)

2 Pipemaking process (U-ing, O-ing)

• U-ing, O-ing
• Press Bending (NEO Press™)
O-ing
3 Welding process (inside/outside welding)

4 Pipe expansion and product finishing process

5 Inspection process (hydrostatic test, various

nondestructive inspections, appearance and
dimensional inspection)
High pressure
Drying
water cleaning

Size Availability
Forming Outer diameter Thickness Length
Process mm (in.) mm (in.) mm (ft)

Min. 400.0 (15.7) Min. 6.0 (0.236)

UOE Max.18 300 (60)
Max.. 1422.4 (56) Max.. 50.8 (2.000)

Min.. 500.0 (19.7) Min.. 6.0 (0.236)

NEO Press™ Max.12 700 (41.7)
Max.. 1422.4 (56) Max.. 50.8 (2.000)

Fukuyama SAWL pipe mill can produce; * Hydrostatic

- odd size pipe,
testing
- heavy wall thickness pipe,
- high grade pipe up to grade X100.

* Ultrasonic
Drying
inspection

* Weld seam
radiographic
inspection

* Internal
Marking
coating

Shipping

6
 Plate Tab welding Edge milling and beveling

U-ing Edge crimping

Press Bending

Continuous tack welding Inside welding Outside welding

Tab cutting･
Bead grinding

Preliminary * Weld seam

* Bead
inspection･ ultrasonic
grinding
Repair welding inspection

Mechanical
expansion * Weld seam
radiographic
inspection

End facing Visual inspection

Automatic dimensional
measurement
Sampling * Radiographic
inspection
(both ends)

* Magnetic particle inspection

Weighing & * Customers * Ultrasonic inspection
* External coating
measuring inspection (both ends)

* The process is performed according to specification available or customer's requirement. Demagnetizing equipment
　　　　is inspection process.

7
 SAWL Pipe Production Equipment

●
●Crimping press ●
●O-ing press

●
●U-ing press ●
●Press bending (NEO Press™)

8
 ●
●Automatic inside submerged arc welder ●
●Automatic continuous tack welder

●
●Mechanical expander

●
●Automatic outside submerged arc welder ●
●Shipping yard

9
 Inspection and Test of SAWL Pipe
Ultrasonic inspection of plates
Ultrasonic inspection of steel plates used as material
for pipemaking is performed as necessary. Inspection
is performed by the pulse echo method using a probe
arrangement which provides 100% coverage of the
center and surrounding areas. Flaw detection results
are recorded automatically for each plate.

Side edge
Top Bottom
edge Driving edge

Direction
of
Testing
Driving

Side edge

T/B head Inside head Side Edge head

●
●Ultrasonic tester for plate

Plate moving Plate moving Plate moving

Side edge head Inside head

1. Side edges 2. Top edge and Inside 3. Side edges 4. Inside 5. Side edges 6. Inside and Bottom edge
(Y Scanning) (X Scanning) (Y Scanning) (X Scanning) (Y Scanning) (X Scanning)

Ultrasonic inspection of welds

Introduction of the full phased array system has made it
possible to perform extremely accurate automatic flaw
detection covering the entire pipe thickness. Probes are
arranged to enable inspection of welds in the longitudinal
and circumferential direction, providing improved
detection accuracy. Results are recorded automatically
and marking is performed on the product at the instructed
location.

Weld seam

Pipe travel
direction

Detection for Detection for

transvers flaw longitudinal flaw

●
●Ultrasonic tester for pipe welds

10
 X-ray inspection (Radiographic inspection)
X-ray inspection of welds are performed as necessary.
Digital radiography method is applied for the inspection
of welds at pipe ends and middle portion.
An example of X-ray inspection is shown below.

source

penetrameter
L1

Position
mark duplex IQI
SDD

FPD
L2

●
●X-Ray equipment for pipe ends

●
●Digital radiography test ●
●X-Ray equipment for middle portion

Pipe end magnetic particle inspection

Pipe ends (bevel surface and weld seam) are inspected
by magnetic-field (magnaflux) flaw detection as
necessary.
Inspections of the bevel surface and weld seam are
performed by positioning magnetic yokes inside and
outside the pipe end.

●
●Magnetic particle inspection equipment for pipe ends

11
 Hydrostatic test
After pipes have been finished to the specified outer diameter by the pipe-expanding
machine, a hydrostatic test is performed by filling the pipe with water, applying the specified
hydraulic pressure for the specified holding time, and checking for leaks. Conventionally,
pass / fail judgments in the hydrostatic test were made manually. However, in November
2018, an automatic judgment system was introduced, reducing the QA risks of judgment
errors and falsification of data.

●
●Hydrostatic tester

Dimensional inspections
Length, outer diameter, inner diameter, roundness, and wall thickness are measured
accurately by automatic dimensional measuring equipment, and the measured results and
pass/fail judgment are displayed immediately on the CRT. At the same time, these results
are input to the computer. These data are used as shipping data and in quality control.

●
●Automatic size measurement
equipment for pipe ends

●
●Automatic size measurement equipment for pipe body

12
 Mechanical test

●
●Tensile tester ●
●Charpy impact tester

●
●39kJ class DWTT tester

●
●120kJ class DWTT tester

13
 Coating
External Coating
External coating of SAWL pipe can be applied to FBE, Three-layer polyethylene, Three-layer polypropylene. These
coatings protect SAWL pipes from corrosion in various environments, such as on land, in the soil, and in the sea.

Available size
Outside diameter Length

406.4 - 1422.4 mm 9.0 - 18.3 m

Internal Coating
Internal coating of SAWL pipe can be applied to epoxy coating. Internal coating provides high corrosion resistance
and transport efficiency of fluids.

Available size
Outside diameter Length

406.4 - 1422.4 mm 9.0 - 18.3 m

14
Specifications
Applicable specifications
JFE Steel Corporation produces tubular products to the specifications listed below.
Other specifications can be also supplied.

Specification Title

API 5L Line pipe

2B Specification for the Fabrication of Structural Steel Pipe

ASTM A53 Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

A134 Pipe, Steel, Electric-Fusion (Arc)-Welded

A139 Electric-Fusion (Arc)-Welded Steel Pipe

A252 Welded and Seamless Steel Pipe Piles

A671 Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

A672 Electric-Fusion-Welded Steel Pipe for High Pressure Service at Moderate Temperatures

A691 Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

JIS G 3444 Carbon Steel Tubes for General Structural Purposes

G 3457 Electric-Arc-Welded Carbon Steel Pipe

G 3475 Carbon Steel Tubes for Building Structure

CSA Z245.1 Steel Pipe

ISO 3183 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems

DNV GL ST-F101 Submarine Pipeline Systems

15
 Available Size Range
56

54

52

50

48

46

44

42

40
X80
Outside diameter (in.)

38

36

34

32

30

28

26

24

22

20

18

16

0.0 5.0 10.0 15.0 20.0 25.0

* Please contact us for the grade not indicated above.

Steel Solution for Energy

JFE Steel provides reliable steel solution for energy industry challenging harsher environments.
URL : http://www.jfe-steel.co.jp/ENERGY

16
 X65 X42

X70

30.0 35.0 40.0 45.0 50.0

Wall thickness (mm)

17
 Cat.No.E1E-016-03

http://www.jfe-steel.co.jp/en/
HEAD OFFICE
Hibiya Kokusai Building, 2-3 Uchisaiwaicho 2-chome, Chiyodaku, Tokyo 100-0011, Japan Phone: (81)3-3597-3111 Fax: (81)3-3597-4860

■ ASIA PACIFIC BRISBANE

JFE Steel Australia Resources Pty Ltd.
SEOUL BANGKOK Level28, 12 Creek Street, Brisbane QLD 4000
JFE Steel Korea Corporation JFE Steel (Thailand) Ltd. Australia
16th Floor, 41, Cheonggyecheon-ro, Jongno-gu, Seoul, 22nd Floor, Abdulrahim Place 990, Rama IV Road, Phone: (61)7-3229-3855 Fax: (61)7-3229-4377
03188, Korea Silom, Bangrak, Bangkok 10500, Thailand
(Youngpung Building, Seorin-dong) Phone: (66)2-636-1886 Fax: (66)2-636-1891 ■ EUROPE and MIDDLE EAST
Phone: (82)2-399-6337 Fax: (82)2-399-6347
YANGON LONDON
BEIJING JFE Steel (Thailand) Ltd., Yangon Office JFE Steel Europe Limited
JFE Steel Corporation Beijing Unit 05-01, Union Business Center, Nat Mauk Road, 15th Floor, The Broadgate Tower, 20 Primrose Street,
1009 Beijing Fortune Building No.5, Dongsanhuan Bocho Quarter, Bahan Tsp, Yangon, 11201, Myanmar London EC2A 2EW, U.K.
North Road, Chaoyang District, Beijing, 100004, Phone: (95)1-860-3352 Phone: (44)20-7426-0166 Fax: (44)20-7247-0168
P.R.China
Phone: (86)10-6590-9051 Fax: (86)10-6590-9056 SINGAPORE DUBAI
JFE Steel Asia Pte. Ltd. JFE Steel Corporation, Dubai Office
SHANGHAI 16 Raffles Quay, No.15-03, Hong Leong Building, P.O.Box 261791 LOB19-1208, Jebel Ali Free Zone
JFE Consulting (Shanghai) Co., Ltd. 048581, Singapore Dubai, U.A.E.
Room 801, Building A, Far East International Plaza, Phone: (65)6220-1174 Fax: (65)6224-8357 Phone: (971)4-884-1833 Fax: (971)4-884-1472
319 Xianxia Road, Shanghai 200051, P.R.China
Phone: (86)21-6235-1345 Fax: (86)21-6235-1346 JAKARTA ■ NORTH, CENTRAL and SOUTH AMERICA
PT. JFE STEEL INDONESIA
GUANGZHOU 6th Floor Summitmas II, JL Jendral Sudirman Kav. NEW YORK
JFE Consulting (Guangzhou) Co., Ltd. 61-62, Jakarta 12190, Indonesia JFE Steel America, Inc.
Room 3901 Citic Plaza, 233 Tian He North Road, Phone: (62)21-522-6405 Fax: (62)21-522-6408 600 Third Avenue, 12th Floor, New York, NY 10016,
Guangzhou, 510613, P.R.China U.S.A.
Phone: (86)20-3891-2467 Fax: (86)20-3891-2469 NEW DELHI Phone: (1)212-310-9320 Fax: (1)212-308-9292
JFE Steel India Private Limited
MANILA 806, 8th Floor, Tower-B, Unitech Signature Towers, HOUSTON
JFE Steel Corporation, Manila Office South City-I, NH-8, Gurgaon-122001, Haryana, India JFE Steel America, Inc., Houston Office
23rd Floor 6788 Ayala Avenue, Oledan Square, Phone: (91)124-426-4981 Fax: (91)124-426-4982 750 Town & Country Blvd., Suite 705 Houston,
Makati City, Metro Manila, Philippines Texas 77024, U.S.A.
Phone: (63)2-886-7432 Fax: (63)2-886-7315 MUMBAI Phone: (1)713-532-0052 Fax: (1)713-532-0062
JFE Steel India Private Limited, Mumbai Office
HO CHI MINH CITY 603-604, A Wing, 215 Atrium Building, Andheri-Kurla MEXICO CITY
JFE Steel Vietnam Co., Ltd. Road, Andheri (East), Mumbai-400093, Maharashtra, JFE Steel America, Inc., Mexico Office
Unit 1704, 17th Floor, MPlaza, 39 Le Duan Street, India Ruben Dario #281-1002, Col. Bosque de
Dist 1, HCMC, Vietnam Phone: (91)22-3076-2760 Fax: (91)22-3076-2764 Chapultepec, C.P. 11580, CDMX. D.F. Mexico
Phone: (84)28-3825-8576 Fax: (84)28-3825-8562 Phone: (52)55-5985-0097 Fax: (52)55-5985-0099
CHENNAI
HANOI JFE Steel India Private Limited, Chennai Office RIO DE JANEIRO
JFE Steel Vietnam Co., Ltd., Hanoi Branch No.86, Ground Floor, Polyhose Towers(SPIC Annexe), JFE Steel do Brasil LTDA
Unit 1501, 15th Floor, Cornerstone Building, 16 Phan Mount Road, Guindy, Chennai-600032, Tamil Nadu, Praia de Botafogo, 228 Setor B, Salas 508 & 509,
Chu Trinh Street, Hoan Kiem Dist., Hanoi, Vietnam India Botafogo, CEP 22250-040, Rio de Janeiro-RJ, Brazil
Phone: (84)24-3855-2266 Fax: (84)24-3533-1166 Phone: (91)44-2230-0285 Fax: (91)44-2230-0287 Phone: (55)21-2553-1132 Fax: (55)21-2553-3430

Notice
While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at
the reader’s risk and no warranty is implied or expressed by JFE Steel Corporation with respect to the use of information contained herein.
The information in this publication is subject to change or modification without notice. Please contact the JFE Steel office for the latest information.

Copyright © JFE Steel Corporation. All Rights Reserved.

Any reproduction, modification, translation, distribution, transmission, uploading of the contents of the document, in whole or in part, is strictly prohibited. 2003R(1702) JTR
Printed in Japan