NewGRP Catalogue

PRODUCT
CATALOGUE
Together We Develop Table of contents
A Better Future 3 Who we are
5 Production Workflow
PT. Gunung Raja Paksi Tbk
9 Long Products
12 H-Beam
13 Wide Flange
15 Wired Rod
17 Flat Products
19 Steel Plate
31 Hot Rolled Coil (HRC)
37 Coil Plate
41 Downstream Products
43 Cold Roll Coil (CRC)
44 Cut to Shape
47 Welded Beam
49 Spiral Pipe
51 CNP (Lipped Channel)
53 ERW Pipe
63 Expended Mesh
65 Annealed Wire
66 Drawn Wire
67 Galvanized Wire
68 Nails
69 Nails Wire
70 Wire Mesh
71 Service Center
75 Steel Application
79 Certification
Who We Are Product Catalogue Who We Are 4
Who We Are
A to Z Under One Roof, Our company
was established in 1970 under the
name PT Gunung Raja Paksi Tbk (GRP)
PT Gunung Raja Paksi Tbk has proven its capabilities by expanding
into a wider range of steel products and this has put Gunung Raja
Paksi, as one of leading steel producers in Indonesia.
The commissioning of our first hot rolled steel machine was in the
last quarter of the year 2000. GRP always emphasite foremost
on professional performances through the in-Depth experience &
accompanied by comprehensive approach in our efforts to provide
the best services and the best possible value-added products. This
ensures that we are able to meet the needs of our customer no matter
how complicate it may be. Among the products range consist of flat,
coils, welded pipe, decking and wire steel products.
GRP has ability to process the basic materials further and expands its
products line into a variety of light fabricated products to suit specific
requirement.
The services we provides are:

Forming Services Center
Bar Services Center
Steel Services Center
Plate Services Center
Coil Services Center
Production
Workflow
07 Production Workflow PT Gunung Raja Paksi Tbk Product Catalogue Production Workflow 08
Production
Workflow SCRAP
CHARGING
ELECTRIC ARC
FURN A CE (EAF)
CONTINOUS
CA STING
STOCK SCRAP - EAF - LANCLE - TUNDISH - CCM
RAW M ATERIAL IRON MAKING STEEL MAKING

& PREPAR ATION
IRON ORE BEAM BLANK B LOOM BILLET SLAB
SINTER
PLAN ELECTRIC O X YGEN H O T ROLLING MILL H O T ROLLING MILL H O T ROLLING MILL
STEEL MAKING
LIMESTONE
B A SIC O X YGEN - REHEATING FURNA CE

- BREAK O D WN
- REHEATING FURNA CE
- BREAK O D WN
FURN A CE (BOF) - ROOLINGSTAND
- HO T SAW
- ROOLINGSTAND
- HO T SAW
WIDE PLATE H O T ROLLED COIL
- COOLING BED - COOLING BED
C O AL COKE BLA ST - STRAIGHTENING

- STOCK YARD
- STRAIGHTENING
- STOCK YARD
UOE PIPE
M A CHINE PLATE
SQ U ARE &
REC TANGULAR
O VENS FURN A CE
SQ U ARE PIPE
IWF/H BEAM ANGLE

SCRAP ELECTRIC ARC ROUND BAR
7 DEFORMED BAR
FLAT BAR WIRE ROD
ME TAL STEEL MAKING SSC PRE-FABRIKA SI SMALL SIZE

REC TANGULAR PIPE
THREADING, THREADING, DR AWING STRAIGHTENING M A CHINE BAR
CUTTING,
BENDING, BENDING, M A CHINE M A CHINE BENDING / CUTTING
BENDING M A CHINE
FORGING M A CHINE FORGING M ACHINE
ELECTRIC ARC
SEMI FINISHED FURN A CE (EAF)
CONTINOUS CA STING KING CROSS IWF
PRODUC TS BAR CUTTING
ROUND BAR STIRRUP
SAGROD BO LT & NUT
& BENDING
QUEEN CROOS H BEAM

KAW AT PAKU KAW AT HI
TAM
ANCHOR BO LT CO LOUMN PR A CTISE
B LOOMS
M A CHINE PRODUCT NAILS G A LVANIZED MA CHINE ANNEALED M A CHINE MESH WELDING M ACHINE
CELL FORM ANGLE
BILLETS HONEY COMB UMP

LIGHTS CO ATING
PAKU / NAILS HE AVY CO ATING

KAW AT BETON WIRE MESH
SLABS
LADLE T BEAM RAIL HRC PLAIN HRC CHECKERED
(REFINING) COLD ROLLING MILL SLITTING M

A CHINE
STRAIGHTENING
CUTTING MACHINE
BEAM BLANK SHEET PILE

PLATE
COLD ROLLED COIL CRC SHEET COIL AFTER SLITTING

SSC
ROLLING STEEL CONSTRUCTION

GI SHEET MILL TUBE MILL STRAIGHTENING
PIPE MILL ROLL FORMING MA CHINE CUTTING MACHINE
SSC MA CHINE
PRODUC TS G A LVANIZED STEEL COIL

ERW PIPE MA CHINE SPIRAL PIPE AMCHINE CHECKERED PL ATE
LONG RODS & BARS
TUBE WELDED BEAM
PRODUC TS A SSEMB LY/WELDING

CONTINOUS
C O ATING LINES LIPPED CHANNEL
W ORKSHOP
- SETTING ERW PIPE

B O X BEAM
- WELDING ROUND PIPE SPIRAL PIPE
- FINISHING
- PAINTING C O ATED STEEL COIL THIN CO ATED
STEEL COIL Z - CHANNEL
SECTIONS
SQ U ARE BEAM
TUBE FOLDING MACHINE ROLL FORMING
M A CHINE
SQ U ARE PIPE
MILL C - CHANNEL
C APING TRIM FLOOR DECK
FLAHING ROOF SHEETING COMPONENT
REHE ATING FURNA CE H O T ROLLING MILLS FLAT FLAT BAR W ALL SHEETING
REC TANGULAR PIPE
/GUSSET PLATE
PRODUC TS ANGLE CF
A SSEMBLING M ACHINE SSC CUT
WELDING TO LENG TH/SHAPE
- SETTING - DRILLING - MARKING
- WELDING
WELDED TUBE LIGHT G A UGE
- CUTTING - PAINTING
LADLE
- FINISHING - BENDING - DLL
- PAINTING
OR DECKING H O T ROLLED
- PUNCHING
(REFINING)
- NOT CHING
- SHO T BLA STING
09 Long Products PT Gunung Raja Paksi Tbk Product Catalogue Long Products 10
Our production products consist

of various sizes according
to international standards
and include all kinds of
structural parts, profiles and
reinforcement rods.
H-Beam
Wide Flange
Wired Rod
Long
Products
GRP hot rolled H-Beam comes with standard size range Another variation of H-Beam under our range product is the
from 100x100 up to 350x350. Non-standard H-Beam can be Wide Flange. Wide Flange is a structural steel profile similar
H Beam Wide
fabricated by welding steel plates together to form a welded with H-Beam but with its flange longer than its web. Gunung
Flange
beam that fits our customer’s size requirements. Raja Paksi hot rolled IWF comes with standard size range
from 150x75 up to 600x200. Please see below for standard
dimensions.
Standard : Web Thickness Range : Flange Thickness Range :
Standard : Web Thickness Range : Flange Thickness Range :
JIS G 3101 SS400 6 to 12 mm 8 to 19 mm
JIS G 3101 SS400 4.5 to 12 mm 7 to 20 mm
(Mild Steel)
(Mild Steel)
ASTM A36
Standard Length : Annual Capacity: ASTM A36 Standard Length : Annual Capacity :
1200 cm / 12 m 1.000.000 MT/Year 1200 cm / 12 m 1.000.000 MT/Year
SECTION SECTION
ST ANDARD SECTIONAL D IMENSIONS AREA GEOMETRICAL RADIUS OF MODULUS OF
STANDARD SECTIONAL DIMENSIONS AREA UNIT WEIGHT GEOMETRICAL RADIUS OF MODULUS OF
MOMENT OF INERTIA GYRATION OF AREA SECTION REMARKS
UNIT WEIGHT MOMENT OF INERTIA GYRATION OF AREA SECTION REMARKS Nominal
Dimensional HxB t1 t2 r Ax I Iy ix iy Zy Zy
HxB t1 t2 r A mm mm x mmm mm mm m cm 2 Kg/m Kg/12m cm 4 cm 4 cm cm cm 3 cm 3
mm x mm mm mm mm cm 2 Kg/m Kg/12m cm 4 cm 4 cm cm cm 3 cm 3 150 x 75 150 x 75 57 8 17.85 14.00 168 666 49.56 .111 .66 88.8 13.2
150 x 100 148 x 100 6 9 11 26.84 21.10 253.2 1,020 151 6.17 2.37 138 30.1
100 x 100 6 8 10 21.90 17.20 206 383 134 4.18 2.47 76.5 26.7 200 x 100 198 x 99 4.5 7 11 23.18 18.20 218.4 1,580 114 8.26 2.21 160 23.0
125 x 125 6.5 9 10 30.31 23.80 286 847 293 5.29 3.11 136 47 200 x 100 5.5 8 11 27.16 21.30 255.6 1,840 134 8.24 2.22 184 26.8
150 x 150 7 10 11 40.14 31.50 378 1 640 563 6.39 3.75 219 75.1 200 x 150 194 x 150 6 9 12 38.80 30.60 367.2 2,675 507 8.30 3.60 275.8 67.6
250 x 125 248 x 124 5 8 12 32.68 25.70 308.4 3,540 255 10.4 2.79 285 41.1
175 x 175 7.5 11 12 51.21 40.20 482 2 880 984 7.50 4.38 330 112 250 x 125 6 9 12 37.66 29.60 355.2 4,050 294 10.4 2.79 324 47.0
200 x 200 8 12 13 63.53 49.90 599 4 720 1 600 8.62 5.02 472 160 300 x 150 298 x 149 5.5 8 13 40.80 32.0 384 6,320 442 12.4 3.29 424 59.3
250 x 250 9 14 16 92.18 72.40 869 10 800 3 650 10.8 6.29 867 292 350 x 175
300
346
x
x
150
174
6.5
6
91
9
3
14
46.78
52.68
36.70
41.40
440.47
469.8
,210
11,100
508
792
12.4
14.5
3.29
3.88
481
641
67.7
91.0
300 x 300 10 15 18 119.80 94 1128 20 400 6 750 13.1 7.51 1 360 450 350 x 175 7 11 14 63.14 49.60 595.2 13,600 984 14.7 3.95 775 112
350 x 350 12 19 20 173.9 137 1644 40 300 13 600 15.2 8.84 2 300 776 400 x 200 396 x 199 7 11 16 72.16 56.60 679.2 20,000 1,450 16.7 4.48 1,010 145
400 x 200 8 13 16 84.1 66.0 792 23,700 1,740 16.8 4.54 1,190 174
450 x 200 450 x 200 9 14 18 96.8 76.0 912 33,500 1,870 18.6 4.40 1,490 187
NOTE : Non standard sizes are available upon request and subject to minimum quantity 500 x 200 500 x 200 10 16 20 114.2 89.6 1075.2 47,800 2,140 20.5 4.43 1,910 214
600 x 200 600 x 200 11 17 22 134.4 106 1272 77,600 2,280 24.0 4.12 2,590 228
600 x 200 588 x 300 12 20 28 192.5 151 1812 181,000 9,020 24.80 6.85 4,020 601
NOTE: Non standard sizes are available upon request subject to minimum quantity.
In support to the building and construction industry, we also

produce Wire Rod. Wire Rod is a rolled steel product, produced
Wire Rod /
from a billet and having a round, rectangular or other cross-
Bar in Coil
section.
Particularly fine cross-sections may be barbed wire, wire mesh and nails, but also
achieved by subsequent cold forming springs, welded wire mesh and reinforce-
(drawing). Wire rod is used for many dif- ment wire. Our wire diameters ranging
ferent products. Depending upon how it is from 9mm to 90mm (rod) and 14mm to
cold formed and heat treated, wire is used, 45mm (bar-in-coil).
for example, to produce no only wire ropes,
Standard & Available Size : Annual Capacity :

Specification : Bar in Coil; Wire Rod; 120.000 MT/Year
JIS G 3505 14mm – 45mm
Round Bar; 9mm – 90mm
17 Flat Products PT Gunung Raja Paksi Tbk Product Catalogue Flat Products 18
Various end products covering all types

of hot and cold plates, hot and cold
rolled coils, as well as various types of
downstream plates and other coils.
Hot Rolled Coil (HCR)

Steel Plate
Coil Plate
Flat
Products
Standard &
Application Grade
Specification
ASTM A36, A283, A131, A529, A572, A573, A633, A709,
JIS SS400, SS490, SS540, SM400, SM490, SM520, SM570
General Structural and Weldable EN S235JR/J0/J2, S275JR/J0/J2/N/NL, S355JR/J0/J2/K2/N/NL/M/ML, S420M/ML, S460M/ML

Structural Steel
DIN ST 37.2, ST 44.2, ST 52.3
AS/NZS 200, 250, 300, 350, 400, 450
BS 40, 43, 50, 55
ASTM A285, A516

Pressure Vessel Steel
EN P235GH, P265GH, P275NH/NL1, P295GH, P355GH/N/NH/NL1/M/ML1
Line pipe Steel API 5L PSL 1; PSL 2 A, B, X42, X46, X52, X56, X60, X65, X70
API 2H 42, 50
Offshore Structural Steel
API 2W 50, 60
ASTM A588
JIS SMA 400, SMA 490,

Weather Resistant Steel
EN S235 J0W/J2W, S355 J0W/J2W/K2W
AS/NZS WR 250
ASTM 1042 - 1050
JIS S 45 - S 50
High Carbon Steel
AS/NZS K1042
PT Gunung Raja Paksi (GRP) understands the diverse demand EN C 45

BKI, ABS, LR,
for this form of flat steel as we produce steel plates from Mild
Ship Building Quality A, B, D, E, AH/DH/EH 32/36/40
Steel
DNVGL, BV, NK
Steel, High-Strength Low Alloy, pressure Vessel, Ship Building

Gas Cylinders Steel JIS SG 255, SG 295
Plate ASTM A1006, A1008, A1011CS/DS,

Plates, and for general purpose uses. Forming and Drawing Steel
JIS SAPH 400/440, SPHC, SPHD, SPHT-1/2/3
We also understand the various uses and applications of steel plates, and as one of the
leading steel mill, we can produce the majority of plate grades and standards as issued by
the world’s major third party certification entities such as BV, ABS, BKI, DNV, LR, GL, TUV,
NK & CE Marked and each with their different sub grades.
To further enhance the performance of out steel product, we have a heat treatment fa-
cility for normalizing. This process is to accommodate with a minimum thickness of 100
mm steel plate and will provide the additional performance enhancement to our high ten-
sile plate range. Combinig our broad experience in steel industry and extensive range of
cutting machines, we are able to fulfill various dimensions and grades required by our
customers.
Annual Capacity : 600,000 MT/year for

plate and 600,000 MT/year for coil (overall
capacity 1,200,000 MT/year)
World class steel plates are manufactured at Gunung Raja

Paksi Plate Mill with state-of-the art of technology to en-
sure their quality. These plates come in various stand-
ards, grades, and sizes to meet your requirement for direct
use, rolling, or fabricating. Ranging from mild steel to high
strength steel, our products are subjected to stringent
quality control protocols.
X 46 8 - 25 320 - 525 4357 60 ---- -4 0- ---- -

API 5L PSL 1 Welded Pipe X 52 8 - 25 360 - 530 4607 60 ---- -4 0- ---- - LINE PIPE STEEL
X 56 8 - 25 390 - 545 4907 60 ---- -4 0- ---- -
X 46M 8 - 25 320 - 525 4357 60 ---- -4 0- ---- -

API 5L PSL 2 Welded Pipe X 52M 8 - 25 360 - 530 4607 60 ---- -4 0- ---- - LINE PIPE STEEL
X 56M 8 - 25 390 - 545 4907 60 ---- -4 0- ---- -
X 60 8 - 25 415 - 565 5207 60 ---- -4 0- -

API 5L PSL 1 X 65 8 - 25 450 - 600 5357 60 ---- -4 0- - PIPELINE STEEL
X 70 8 - 25 485 - 635 5707 60 ---- -4 0- -
X 60M8 - 25 415 - 565 5207 60 ---- -4 0- -
API 5L PSL 2 X 65M8 - 25 450 - 600 5357 60 ---- -4 0- - PIPELINE STEEL
X 70M8 - 25 485 - 635 5707 60 ---- -4 0- -
Product
Tensile Test (TR) Impact Test (LG)
Grade Thickness Thickness Bend Remarks
(mm) Range (mm) YS min. UTS
E min. (%) LG TR
(N/mm2) Test
(N/mm2)
360 450 min 20 (5.65VSo) -
(Average Temp.)
-
(Average Temp.)
- As a result of continual expansion, Gunung Raja Paksi are We also have a shotblasting and painting
350 450 min 20 (5.65VSo) - - -
350 8 - 100 340 450 min 20 (5.65VSo) - - - pleased to announce that we are capable of producing facility which is commonly applied to steel
340 450 min 20 (5.65VSo) - - -
AS/NZS 3678
ACRS
340
330
450 min
450 min
20 (5.65VSo)
20 (5.65VSo)
-
-
-
-
-
-
STRUCTURAL STEEL
HOT ROLLED PLATES,
normalized plates, which includes pressure vessel grades for shipbuilding purposes, or as per cus-
400 480 min 18 (5.65VSo) - - FLOORPLATES
171202 400 8 - 32 380 480 min 18 (5.65VSo) - - - AND SLABS such as ASTM A516 and A537 CI-1 plates. This grade re- tomer requirement.
360 480 min 18 (5.65VSo) - - -
290 415 min 20 (200mm), - - - quires heat treatment (normalizing) to achieve better
42 6 - 150 > 40 290 415 min 24 (50mm) - - - FOR HIGH STRENGTH
ASTM A 572
(2011) 50 6 - 100 > 40
345
345
450 min
450 min
18 (200mm),
21 (50mm)
-
-
-
-
-
-
LOW ALLOY COLUM-
BIUM VANADIUM plate quality.
60 - - 415 520 16 (200mm) - STRUCTURAL STEEL
65 - - 450 550 15 (200mm) - -
ASTM A 709 345 450 min 18 (200mm), - FOR STRUCTURAL
(2011) 50 6 - 80 > 40 345 450 min 21(50mm) - - STEEL FOR BRIDGES
290 415 min 20 (200mm), - - - FOR HIGH STRENGTH
ASME SA 572 42 6 - 150 > 40 290 415 min 24 (50mm) - - - LOW ALLOY COLUM-
(2010, 2011a 345 450 min 18 (200mm) - - - BIUM VANADIUM
Addenda) 50 6 - 100 > 40 345 450 min 21 (50mm) - - - STRUCTURAL STEEL
355 490 - 640 - - -
345 490 - 640 18 (200mm) - - -
We can also supply flat products in coil form, whether it is hot-

rolled or cold-rolled. Our hot rolled coils have excellent form-
Hot Rolled
ability and weldability. On the other hand, our cold rolled coils
Coil
offer superior surface quality, mechanical property, and pre-
cise dimensions.
Our hot rolled coils are produced by heat- Applications of our hot rolled coils include
ing the best steel slabs we can source over welded steel structural beams, forming ap-
the recrystallization temperature, rolled plication, storage tanks, boilers, flanges,
into desired thickness, and coiled at high gas cylinders, and welded pipe.
temperature.
Standard & Available Size : Annual Capacity :

Specification : Thickness 2mm - 20mm 900.000 MT/Year
ASTM A-36 Width 900mm – 1524mm (for coil production only)
ASTM A-572 Maximum 25 MT/Coil
JIS G 3101
JIS G 3131
B8 - 25 245 - 4504 15 760- ---- 40 ------

API 5L PSL 1
X 42 8 - 25 290 - 4954 15 760- ---- 40 ------
LINE PIPE STEEL
BM 8 - 25 245 - 4504 15 760- ---- 40 ------
API 5L PSL 2
X 42M8 - 25 290 - 4954 15 760- ---- 40 ------
X 46 8 - 20 320 - 525 435 760 - - - - - 40 - - - - - -
X 52 8 - 20 360 - 530 460 760 - - - - - 40 - - - - - -
X 56 8 - 20 390 - 545 490 760 - - - - - 40 - - - - - -

API 5L PSL 1 Welded Pipe LINE PIPE STEEL
X 60 8 - 16 415 - 565 520 760 - - - - - 40 - - - - - -
X 65 8 - 16 450 - 600 535 760 - - - - - 40 - - - - - -
X 70 6 485 - 635 570 760 - - - - - 40 - - - - - -
X 46M 8 - 20 320 - 525 435 760 - - - - - 40 - - - - - -
X 52M 8 - 20 360 - 530 460 760 - - - - - 40 - - - - - -
X 56M 8 - 20 390 - 545 490 760 - - - - - 40 - - - - - -

API 5L PSL 2 Welded Pipe LINE PIPE STEEL
X 60M 8 - 16 415 - 565 520 760 - - - - - 40 - - - - - -
X 65M 8 - 16 450 - 600 535 760 - - - - - 40 - - - - - -
X 70M 6 485 - 635 570 760 - - - - - 40 - - - - - -
X 42MO 8 - 20 290 - 495 415 760 - - - - - 40 - - - - - -

X 46MO 8 - 20 320 - 520 435 760 - - - - - 40 - - - - - - LINE PIPE STEEL FOR OFFSHORE
Service X 52MO 8 - 20 360 - 525 460 760 - - - - - 40 - - - - - - SERVICES
X 56MO 8 - 20 390 - 540 490 760 - - - - - 40 - - - - - -
SG 255 2554 00 -- -2 8- ---- - --

JIS G 3116 SG 295 2954 40 -- -2 6- ------ - GAS CYLINDER STEEL
SG 325 3254 90 -- -2 2- ------ -
High Strength Steel YS>300 Mpa
M E C H A N I C A L P R O P E R T I E S
Prod.
SPECIFICATION GRADE Thick Tensile Testing Impact Testing (CVN)
(mm)
YS (MPa) TS (MPa) EL (%) LG TR
AH36 6 - 10 355 490 - 620 19 0°C (27 Joule) 0°C (24 Joule)
DH36 6 - 10 355 490 - 620 19 -20°C (27 Joule) -20°C (24 Joule)
ASTM A 131 / EH36 6 - 10 355 490 - 620 19 -40°C (27 Joule) -40°C (24 Joule)
ASME SA 131
AH40 6 - 10 390 510 - 650 19 0°C (39 Joule) 0°C (26 Joule)
DH40 6 - 10 390 510 - 650 19 -20°C (39 Joule) -20°C (26 Joule)
EH40 6 - 10 390 510 - 650 19 -40°C (39 Joule) -40°C (26 Joule)
50 6 - 10 345 450 18M - -
ASTM A 572 / ASME SA 527 55 6 - 10 380 485 17M - -
60 6 - 10 415 520 16M - -
ASTM A 573 / ASME SA 573 70 6 - 10 290 485 - 620 18R - -
SS 490 6 - 10 285 490 - 610 15 - -

JIS G 3101
SS 540 6 - 10 400 540 13 - -
SM 490 A 6 - 10 325 490 -610 17 - -
SM 490 B 6 - 10 325 490 -610 17 0°C (27 Joule) -
SM 490 C 6 - 10 325 490 -610 17 0°C (47 Joule) -
SM 490 YA 6 - 10 365 490 -610 15 - -

JIS G 3106
SM 490 YB 6 - 10 365 490 -610 15 0°C (27 Joule) -
SM 520 B 6 - 10 365 520 - 640 15 0°C (27 Joule) -
We produce Steel Coil Plate with our Standard &

SM 520 C 6 - 10 365 520 - 640 15 0°C (47 Joule) -
proprietary technology to guarantee the Specification :
Coil
A36, SS400
Plate best quality product results. Our Coil 50 B 6 - 10 355 490 - 640 18C +20°C (27 Joule) -
A283, EN 10025 Gr.235 JR,

Plate comes with a variety of standards BS 4360 50 C 6 - 10 355 490 - 640 18C 0°C (27 Joule) -
A572Gr50.
and sizes that can be tailored to your 50 D 6 - 10 355 490 - 640 18C -20°C (47 Joule) -
needs.
Available Size : 50 DD 6 - 10 355 490 - 640 18C -30°C (47 Joule) -
1.8 mm - 12 mm
GRP uses equalizing process to produce highest stand- S 355 JR 6 - 10 355 470 - 630 20 +20°C (27 Joule) -
EN 10025-2 /
ard of coil plate, This industry leading standard produc- MS EN 10025-2 S 355 J0 6 - 10 355 470 - 630 20 0°C (27 Joule) -
es a quality steel plate that is consistently flat. Annual Capacity:
S 355 J2 6 - 10 355 470 - 630 20 -20°C (47 Joule) -
300.000 MT/Year
350 W (50 W) 6 - 10 350 450 - 650 17 - -
CSA G40.21 (1998) 400 W (60 W) 6 - 10 400 520 - 690 13 - -
1E-1863 6-100 345 -500 450 16 -29°C (11 Joule) -

PRESSURE VESSEL STEEL AVAILABLE SIZE
M E C H A N I C A L
Prod. Thick
SPECIFICATION GRADE Maximum Length (mm)
Tensile Testing
(mm)
YS (MPa) TS (MPa) EL (%) Width Range (mm)
55 6 - 10 205 380 - 515 23

Thickness Range (mm)
900 - 1070 1070 -1219 1219 - 1524
ASTM A 516 / 60 6 - 10 220 415 - 550 21
ASME SA 516 65 6 - 10 240 450 - 585 19

2-3 4000 4000 -
MILD STEEL
70 6 - 10 260 485 - 620 17
ASTM A 572 / B 4 - 12 185 345 - 485 25 (YS < 300 MPa) 3 - 4.5 6000 6000 -
ASME SA 527 C 4 - 12 205 380 - 515 23

4.5 - 6 12000 12000 12000
SG 255 2-4 255 400 28
JIS G 3101
SG 295 2-3 295 440 26
6-8 12000 12000 12000
8-9 12000 12000 12000
WEATHER RESISTANT STEEL / Atmospheric Corrosion Resistance 9 - 12 12000 12000 12000
M E C H A N I C A L *Minimum Length 2000 mm

Prod. Thick
SPECIFICATION GRADE
Tensile Testing
(mm)
YS (MPa) TS (MPa) EL (%)
Maximum Length (mm)
ASTM A 242 / ASME SA 242 - 6 - 10 345 480 18
Width Range (mm)

Thickness Range (mm)
HIGH STRENGTH STEEL
900 - 1070 1070 -1219 1219 - 1524
SHIP-BUILDING STEEL (YS > 300 MPa)
6-8 12000 12000 12000
M E C H A N I C A L P R O P E R T I E S
Prod. 8-9 12000 12000 12000
SPECIFICATION GRADE Thick Tensile Testing Impact Testing (CVN)
9 - 10 12000 12000 12000
(mm)
YS (MPa) TS (MPa) EL (%) LG TR
*Minimum Length 2000 mm
AH36 6 - 10 355 490 - 620 19 0°C (27 Joule) 0°C (24 Joule)
DH36 6 - 10 355 490 - 620 19 -20°C (27 Joule) -20°C (24 Joule)
EH36 6 - 10 355 490 - 620 19 -40°C (27 Joule) -40°C (24 Joule)
AH40 6 - 10 390 510 - 650 19 0°C (39 Joule) 0°C (26 Joule)
Certified by LR, ABS, DH40 6 - 10 390 510 - 650 19 -20°C (39 Joule) -20°C (26 Joule)
BV, BKI, & DNV GL

EH40 6 - 10 390 510 - 650 19 -40°C (39 Joule) -40°C (26 Joule)
A 5-12 235 400 - 520 21 - -
B 5-12 235 400 - 520 21 0°C (27 Joule) 0°C (20 Joule)
D 5-12 235 400 - 520 21 -20°C (27 Joule) -20°C (20 Joule)
E 5-12 235 400 - 520 21 -40°C (27 Joule) -40°C (20 Joule)
41 Downstream Products PT Gunung Raja Paksi Tbk Product Catalogue Downstream Products 42
The strength, flexibility, and

affordability of the steel bar make
it one of the most widely used
construction / construction materials
in the world. We offer steel bars in
various shapes and sizes
Cold Roll Coil (CRC)

Cut to Shape
Welded Beam
Spiral Pipe
CNP (Lipped Channel)
ERW Pipe
Expended Mesh
Annealed Wire
Drawn Wire
Galvanized Wire
Nails
Nails Wire
Wire Mesh
Downstream
Products
GRP also produces our coil products Standard & With multi head oxy flame cutting Standard &
in cold rolled form to cater to specific Specification : machines we can cut thick mild steel Specification :
Cold Rolled JIS G 3141 spec 1B
Cut To Thickness and flatness tol-
materials requirement for that unique material up to 300 mm thick. Our large
Coil JIS G 3141 spec SB Shape erance in accordance with
product application. cutting facility 3500 mm wide X 25000
JIS G 3141 spec SD standard. Profiling toler-
mm long , 6 ESAB Make CNC Oxy cutting
ance +/- 2 mm to +/- 6 mm
This flat steel product rolled into thinner sizes while it machine coupled with multi head flame
depending on
is in normal room temperature to the exact thickness Available Size : cutting facility, make flame cutting
thickness and size
requirement and rolled into coils. The resulting of cold Thickness 0.2mm – 1.5mm
accurate and ideal for high production. (length & Width).
rolled coils is that they have a better surface quality, Width 700mm – 1000mm
thinner profiles, and excellent finishes, and can be Maximum 762 MT/Coil We have eight multi head oxy flame flat bar cutting fa- Size Chart :
made into different type of products by means of cold Maximum 25 MT/Coil cility of capacity 3000 mm wide and 20,000 long and Cutting Thickness 6 mm to
forming. one plasma cutting machine with the cutting capacity 300 mm, full range of mild
Annual Capacity : of 20 mm thick x 6000 mm long. In addition to oxy cut- and carbon steels readily
900.000 MT/Year ting we have two shearing machines of capacity 13 mm available or met to order
thick X 12000 mm long. supply by our plate mill.
Annual Capacity :
Average 1000 Ton per
Month (dependent on size
of CTS and specification of
material)
Area Unit Unit Geometrical Radius of Modulus of

HxB t1 t2 r A Weight Weight
Ix Iy ix iy Zx Zy
mm mm mm mm mm2 kg/m kg/12m cm4 cm4 cm cm cm3 cm3
588 x 300 12 20 28 192.5 151.00 1812 118,000 9,020 24.80 6.85 4,020.00 601.00
700 x 300 13 24 28 235.5 181.00 2171 201,000 10,800 29.30 6.78 5,760.00 722.00
800 x 300 14 26 28 267.4 207.00 2474 292,000 11,700 33.00 6.62 7,290.00 782.00
900 x 300 16 28 28 309.8 240.00 2878 411,000 12,600 36.00 6.39 9,140.00 843.00
350 x 350 12 19 20 173.9 137 1644 40,300 13,600 15.2 8.84 2,300.00 776.00
400 x 400 13 21 22 218.7 172 - 66,600 22,400 17.5 10.1 3,330.00 1,120.00
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
Structural
300L15
400L15
350L15
Range
300
400
350
1200 WB 455 1 200 500 40.0 16.0 1 120 500 WC 440 480 500 40.0 40.0 400
423 1 192 500 36.0 16.0 1 120 414 480 500 40.0 32.0 400
700WB to 1200WB 392 1 184 500 32.0 16.0 1 120 383 472 500 36.0 32.0 400
with web thick-
Beams 342 1 184 400 32.0 16.0 1 120 340 514 500 32.0 25.0 450
nesses 10 to 16mm
317 1 176 400 28.0 16.0 1 120 290 506 500 28.0 20.0 450
278 1 170 350 25.0 16.0 1 120 267 500 500 25.0 20.0 450
249 1 170 275 25.0 16.0 1 120 228 490 500 20.0 20.0 450
350WC to 500WC
1000 WB 322 1 024 400 32.0 16.0 960 400 WC 362 430 400 40.0 40.0 350
Columns with web thickness 296 1 016 400 28.0 16.0 960 328 430 400 40.0 28.0 350
16 to 40mm 258 1 010 350 25.0 16.0 960 303 422 400 36.0 28.0 350
215 1 000 300 20.0 16.0 960
270 414 400 32.0 25.0 350
900 WB 282 924 400 32.0 12.0 860 212 400 400 25.0 20.0 350
Cert. No. 171203 T 1011 257 916 400 28.0 12.0 860 181 390 400 20.0 20.0 350
218 910 350 25.0 12.0 860 144 382 400 16.0 16.0 350
175 900 300 20.0 12.0 860
350 WC 280 355 350 40.0 28.0 275
800 WB 192 816 300 28.0 10.0 760 258 347 350 36.0 28.0 275
168 810 275 25.0 10.0 760 230 339 350 32.0 25.0 275
146 800 275 20.0 10.0 760 197 331 350 28.0 20.0 275
122 792 250 16.0 10.0 760
700 WB 172 716 275 28.0 10.0 660

150 710 250 25.0 10.0 660
130 700 250 20.0 10.0 660
Functioned similar to the mass produced H and I beam, the

115 692 250 16.0 10.0 660
welded beams are made by joining together different plates to

Welded
form a single beam.
Beam
Welded beam serves as the alternatives for At GRP, we produce our welded beam in
construction projects that require beams compliance with the JIS G 3192 standard
that are not able to be produced in hot sizes and dimensions. We also provide the
rolled form. Our welded beam products services to tailor-made the beam sizes and
are machine welded and are closely super- dimension to suit the unique and challeng-
vised by our qualified technician and engi- ing construction project as required by our
neers to ensure the quality of the welding customers.
and the final products.
Standard & Available Size :

Specification : As per customer Requirement
Supply various specification / international
standard like JIS , ASTM , EN , BS , AS , ABS
Annual Capacity:
, AS/NZS 3679.2 etc.
36.000 to 50.000 MT/Year
The versatile spiral-welded steel pipes are popular among

different applications in the oil & gas industries, building
Spiral
construction and water / liquid distribution system. This type
Pipe
of pipe product is often used for foundation pilling, liquid flow
distribution system and ports / jetty construction.
Available Size : GRP produces our pipe with the automatic double-sided Submerged Arc Welding (S.A.W)
ø 8” – ø 120” technology to ensure the great consistency of our wielding and the quality of our final
(Outside Diameter) product.
`
For a specific work project, we are able produce the spiral-wielded steel pipes to suit
Annual Capacity :
different thickness and the diameter of up to 120” OD. In addition, we are able to provide
48.000 MT/Year
additional coating services with different type of material to the pipe depending on the
project’s requirement.
Standard & Specifications
Lipped Channel is the ultimate alternative instead of Hot / Cold

Rolled channel which has the same advantages such as re-
Lipped
duced thickness and cost-effectiveness. Lipped Channels are
Channel
often used for steel structures, storage areas, pollution control
devices, and a variety of other architectural needs.
Standard Material : Y
JIS G 3131 SPHC , B
SAE 1006 / SAE 1008
Std Dimentional
C
Tolerances :
ix
JIS G 3350 H iy
X S.C. X
t
Available Size : Y
CNP 100 x 50 x 2.0 mm up
to CNP 200 x 75 x 3.2 mm
Cy
Cy
Sx
Sx
Annual Capacity:
30.000 MT/Year
Normal Size Outside Test Pressure

Thickness
Diameter Sch
(mm)
DN NPS (mm) Psi Kg/cm2
25 1” 33,4 3,38 40 700 49

32 11/4” 42,2 3,56 40 1200 85
40 11/2” 48,3 3,68 40 1200 85
50 2” 60,3 3,91 40 2300 161
65 12/2” 73 5,16 40 2500 175
3,18 - 1290 91
3,96 - 1600 112
80 3” 88,9
4,78 - 1930 136
5,49 40 2220 156
3,18 - 1000 70
3,96 - 1250 88
100 4” 114,3 4,78 - 1500 105
5,56 - 1750 123
6,02 40 1900 134
Normal Size Outside Diameter Wall Hydrostatic Test

DN Thread Size Max Min Thickness
With many different application and uses that can be achieved (mm) R (mm) (mm) T (mm) Psi BAR
from using round pipe products, at GRP we manufactured our

ERW Pipe
25 1 33,8 33,2 2,6 730 50
pipe from 2 3/8” OD in a variety of length to over 100 feet using 32 11/4 42,5 41,9 2,6 730 50
(Electric Resistance Electric Resistance Welding (ERW) methods.
Welded Pipe)
As we strive to maintain to the highest standard quality, our ERW tubular pipe complied DN Thread Size Max Min Thickness
T (mm) Psi BAR
with different local and international standard specifications for its varying application (mm) R (mm) (mm)
requirements. 32 11/4 42,9 42,1 3,2 730 50
40 11/2 48,8 48 3,2 730 50
The surface finish for this product is available in bare or in coated form and the process- 50 2 60,8 59,8 3,6 730 50
ing will be carried out in our facility. For the application carrying flow of water / liquid ma- 65 21/2 76,6 75,4 3,6 730 50
terial, we can also perform hydrostatic testing on the products to ensure leakage-proof 80 3 89,5 88,1 4,0 730 50
in its operations. 100 4 114,9 113,3 4,5 730 50
125 5 140,6 138,7 5,0 730 50
Standard & Medium Series (M) STKM 12 A 150 6 166,1 164,1 5,0 730 50
Specification : Light Series (L) JIS G 3452 SGP Black And Gal-
BS EN 10255 : 2004 (E) vanized Pipe,
ASTM A53 (A), JIS G 3444 STK 290, JIS G 3454 STPG 370, Thickness
DN Thread Size Max Min
Psi BAR
BS 1387 : 1985 Heavy JIS G 3444 STK 400, SNI 07 – 0068 – 2007 PKB 30, (mm) R (mm) (mm) T (mm)
Series (H) JIS G 3445 STKM 11 A, SNI 07 – 0068 2007 PKB 41 65 21/2 76,6 75,4 4,5 730 50
80 3 89,5 88,1 5,0 730 50
Available Size : Annual Capacity : 100 4 114,9 113,3 5,4 730 50
1/4 inch OD to 6 inch OD 72.000 MT/Year 125 5 140,6 138,7 5,4 730 50
(Outside Diameter) 150 6 166,1 164,1 5,4 730 50
Outside Diameter (mm) Thickness (mm) Cros Sectional Area cm²

34 2,3 2,291
2,3 2,919
42,7
2,5 3,157
2,3 3,345
2,5 3,621
48,6
2,8 4,029
3,2 4,564
2,3 4,205
60,5
3,2 5,760
4,0 7,100
2,8 6,495
76,3 3,2 7,349
4,0 9,085
2,8 7,591
89,1
3,2 8,636
3,2 11,17
114,3 3,5 12,18
4,5 15,52
3,6 15,4
4,0 17,07
139,8
4,5 19,13
6,0 25,22
4,5 22,72
5,0 25,16
165,2
6,0 30,01
7,1 35,26
Outside Diameter (mm) Thickness (mm) Cros Sectional Area cm²
48,6 2,3 3,345

2,5 3,621
2,8 4,029
60,5 2,3 4,205
3,2 5,760
76,3 2,8 6,495
3,2 7,349
89,1 2,8 7,591
3,2 8,636
114,3 3,2 11,17
3,5 12,18
4,5 15,52
139,8 3,6 15,4
4,0 17,07
4,5 19,13
165,2 4,5 22,72
5,0 25,16
6,0 30,01
Normal Size Outside Test Pressure

Thickness
Diameter
A B (mm) Psi Kgf/cm2
(mm)
25 1” 34 3,2 365 25
32 1¼’’ 42,7 3,5 365 25
40 1½ 48,6 3,5 365 25
50 2’’ 60,5 3,8 365 25
65 2½ 76,3 4,2 365 25
80 3’’ 89,1 4,2 365 25
100 4’’ 114,3 4,5 365 25
125 5’’ 139,8 4,5 365 25
150 6’’ 165,2 5,0 365 25
STKM 11 A STKM 13 A STKM 14 A Diameter dalam

Outside Diameter (mm) Diameter luar (mm) Thickness Test Pressure
Tch (mm) Tch (mm) Tch (mm) Normal
(mm)
33,4 2 sd 3.2 2 sd 3.2 2 sd 2.2 (mm) (inci) Normal Max Min Psi Kgf/cm2
42,2 2 sd 3.4 2 sd 3.4 2 sd 2.5 25 1’’ 33,6 34 33,2 2,6 710 50
48,3 2 sd 3.6 2 sd 3.6 2 sd 2.8 32 1 1/4’’ 42,3 42,7 41,9 2,6 710 50
60,3 2 sd 4.0 2 sd 4.0 2 sd 3.2
40 1 1/2’’ 48,20 48,60 47,8 2,9 710 50
73 2 sd 4.85 2 sd 4.85 2 sd 3.4
50 2’’ 60,2 60,8 59,6 2,9 710 50
76 2 sd 4.85 2 sd 4.85 2 sd 3.4
65 2 1/2’’ 76 76,7 75,2 3,2 710 50
88,9 2 sd 5.2 2 sd 5.2 2 sd 3.6
80 3'' 88,8 89,7 87,9 3,2 710 50
114,3 2.5 sd 5.8 2.5 sd 5.8 2.5 sd 4.5
100 4’’ 114,1 115,3 113 3,6 710 50
139,8 3.6 sd 6.5 3.6 sd 6.5 3.6 sd 6.0
125 5’’ 139,7 140,5 137,7 3,6 710 50
165,2 3.6 sd 7.0 3.6 sd 7.0 3.6 sd 6.5
150 6’’ 165,1 166,8 163,4 3,6 710 50
Chemicsal composition % Mechanical Property

Tensile test Flatning Bending test Diameter dalam
Grade Designation C Si Mn P S test Diameter luar (mm) Thickness Test Pressure
Ts Min Ys Min El Min ( % ) Bending Inside Normal
Max Max Max Max Max (D:Outside (mm)
N/mm² N/mm² Test no 12 Test no 5 diameter) angle radius (mm) (inci) Normal Max Min Psi Kgf/cm2
Grade 11 A STKM 11 A 0,12 0,35 0,6 0,04 0,04 290 - 35 30 ½D 180° 4D 25 1’’ 33,7 34,2 33,3 3,2 710 50
Grade 13 A STKM 13 A 0,25 0,35 0.3 to 0.9 0,04 0,04 370 215 30 25 ⅔D 90° 6D 32 1 1/4’’ 42,4 42,9 42 3,2 710 50 Pipa Tipis
Grade 14 A STKM 14 A 0,3 0,35 0.3 to 1.0 0,04 0,04 410 245 25 20 ¾D 90° 6D 40 1 1/2’’ 48,30 48,80 47,9 3,2 710 50 : + 10%
• Tebal
50 2’’ 60,3 60,8 59,7 3,6 710 50 - 8%
Wall Thickness 65 2 1/2’’ 76,1 76,6 75,3 3,6 710 50
Symbol Pipa Medium
Grade Test piece
of grade >1mm to 2mm >2mm to 3mm >3mm to 4mm >4mm to 5mm >5mm to 6mm >6mm to 7mm 80 3'' 88,9 89,5 88 4 710 50
: + 15%
Test piece no.5 21 Min 22 Min 24 Min 26 Min 27 Min 28 Min 100 4’’ 114,3 115 113,1 4,5 710 50 • Tebal
Grade 11 A STKM 11 A
125 5’’ 139,7 140,8 138,5 5 710 50 - 10%
Test piece no.12 26 Min 28 Min 29 Min 30 Min 32 Min 34 Min
Test piece no.5 16 Min 18 Min 19 Min 20 Min 22 Min 24 Min 150 6’’ 165,1 166,5 163,9 5 710 50 Pipa Medium
Test piece no.12 21 Min 22 Min 24 Min 26 Min 27 Min 28 Min : + 15%
• Tebal
Test piece no.5 11 Min 12 Min 14 Min 16 Min 17 Min 18 Min - 12.5%
Test piece no.12 16 Min 18 Min 19 Min 20 Min 22 Min 24 Min Diameter dalam
Diameter luar (mm) Thickness Test Pressure
Normal
(mm)
Division Tolerances on outside diameter Division Tolerances on wall thickness (mm) (inci) Normal Max Min Psi Kgf/cm2
Under 50 mm ± 0.5 mm + 0.6 mm 65 2 1/2’’ 76 76,6 75,4 4,5 710 50
1 Under 4 mm
50 mm or ofer ±1% - 0.5 mm 80 3’’ 88,8 89,5 88,1 5 710 50
1
Under 50 mm ± 0.25 mm + 15 %
2 4 mm or over 100 4’’ 114,1 114,9 113,3 6,0 710 50
50 mm or ofer ± 0.5 % - 12.5 %
125 5’’ 139,7 142,7 138,7 6,6 710 50
Under 25mm ± 0.12 mm
25 mm or over to and excl. 40mm ± 0.15 mm
40 mm or over to and excl. 50 mm ± 0.18 mm Under 3 mm ± 0.3 mm
2
50 mm or over to and excl. 60 mm ± 0.2 mm 3 mm or over ± 10 %
60 mm or over to and excl. 70 mm ± 0.23 mm
3 70 mm or over to and excl. 80 mm ± 0.25 mm
80 mm or over to and excl. 90 mm ± 0.3 mm Under 2 mm ± 0.15 mm
3
90 mm or over to and excl. 100 mm ± 0.4 mm 2 mm or over ±8%
100 mm or over ± 0.5 %
+50
Tolerances
-0
Outside Diameter Thickness Outside Diameter Thickness Cros Sectional Area

Cros Sectional Area cm²
(mm) (mm) (mm) (mm) cm²
34 2,3 2,291 2,3 3,345
48,6
2,3 2,919 2,8 4,029
42,7
2,5 3,157 2,3 4,205
60,5
2,3 3,345 3,2 5,760
48,6 2,8 4,029 2,8 6,465
76,3
3,2 4,564 3,2 7,349
2,3 4,205 2,8 7,591
60,5 89,1
3,2 5,760 3,2 8,636
4,0 7,100 3,2 11,170
2,8 6,465 114,3 3,6 12,520
76,3 3,2 7,349 4,5 15,520
4,0 9,085 3,6 15,400
2,8 7,591 139,8 4,0 17,070
89,1 3,2 8,636 4,5 19,130
4,0 10,690 4,5 22,720
3,2 11,170 165,2 5,0 25,160
3,6 12,520 6,0 30,010
114,3
4,5 15,520
5,6 19,120
3,6 15,400
4,0 17,070
139,8
4,5 19,130
6,0 25,220
4,5 22,720
5,0 25,160
165,2
6,0 30,010
7,0 34,790
Dimension Mesh Size Prod. Size

Type SWM LWM T Width L P (S)
(mm) (mm) (mm) (mm) (mm) (mm)
Expanded EOM 3035 22 57 3,0 3,5 1200 2400

Ornamesh EOM 3045 35 76 3,0 4,5 1200 2400
EGM 30080 30 75 3,0 8,0 1200 2400
EGM 50075 25 75 5,0 7,5 1200 2400
Expanded
Grid Mesh EGM 50105 30 75 5,0 10,5 1200 2400
EGM 50080 42 135 5,0 8,0 1200 2400
EGM 50110 45 135 5,0 11,0 1200 2400
Expanded EMM 50050 75 200 5,0 5,0 1200 2400
Merapi Mesh EMM 30050 75 200 3,0 5,0 1200 2400
Expanded
EDM 30032 25 80 3,0 3,2 1200 2400
Merapi Mesh
Expanded mesh is one continuous single sheet of mesh pro-

Expanded duced when a flat metal plate is sheared and stretched but is
Mesh left intact at the ‘knuckles’ . It is available in a variety of thick-
nesses with differing sizes and designs of the apertures.
A further feature is the provision of an ex- of the product provides good visibility
cellent anti-slip surface. This makes the through the mesh as well as the easy pas-
product suitable for ramps (e.g. inclined sage of air and aound whilst ensuring se-
walkways adjacent to conveyors) plat- curity and protection.
forms and stair treads. The open nature
Standard & Available Size : Annual Capacity:

Specification : 22 x 57 mm up to 1.440 MT/Year
JIS G 3351 75 x 200 mm
JIS G 3131
ASTM 830
Another variation to our wire products Standard &

is the Annealed Wire. Annealed Wire is Specification :
Annealed
obtained by means of thermal annealing, JIS G 3532
Wire
endowing it with the properties it needs SNI 07-0040-2006
for its main use – setting.

Available Size :
Soft annealed wire offers excellent flexibility and softness Diameter
through the process of oxygen free annealing. The wire 0.8mm – 3mm
is deployed both in civil construction and in agriculture.
Annual Capacity :
Hence, in civil construction annealed wire, also known as
4.000 MT/Year
“burnt wire” is used for iron setting, tie wire or baling wire
in building, parks and daily binding.
Straight wire that is plain (round steel) or rib (deformed steel).

Nominal Diameter Tol. Ø Tensile Strength Torsion
Drawn or rolled wire is cold-worked from steel wire rod that
No. Product (mm) (mm) (N/mm)2 (Nr) Drawn
has been hot rolled from billets and produced as both bright
1 AW 0.80 0.80 ± 0.04 - - Wire
2 AW 0.90 0.90 ± 0.04 - - basic and deformed wire.
3 AW 2.00 2.00 ± 0.06 260 - 590 55
4 AW 3.00 3.00 ± 0.06 260 - 590 36
Standard & Size Chart : Production Capacity :

Specification : Ø 4.0 – 5.5 mm 150 ton/month
JIS G3551 ( plain wire )
Ø 4.0 – 10.0 mm
( rib wire )
Our galvanized wire are made from high Standard & The smallest of building components, a nail consists of a metal
grade billets and processed with ad- Specification : rod or shank, pointed at one end and usually having a formed
Galvanized Nail
vanced processing technology and it JIS G 3547 / head at the other, that can be hammered into pieces of wood or
Wire SNI 07-0040-2006
other materials to fasten them together.
comes in Low Carbon Light Coating
(LLC) and Low Carbon Heavy Coating Available Size :
(LHC) variant. 1.6mm – 4.27mm
Our nails are made from Standard & Available Size :
Various diameter and zinc coating grammature can be Annual Capacity: our own produced nail Specification : Length 33mm - 125mm,
set to suit the uses in for communication devices, medi- 36.000 MT/Year wire, ensuring the qual- JIS A 5508 Shank 2.15mm – 5.20mm
cal treatment equipment, weaving of wire mesh, making of ity is maintained. It comes JIS G 3505 Head 5.1mm – 10.3mm
brushes, steel rope, filter wire mesh, high pressure pipes, with 2.03mm to 5.29mm SNI 0323 – 2016
construction, arts and crafts, etc. diameter and 36.88mm to
130.4mm long. Annual Capacity
5.000 MT/Year
Length Shank Head

LLC-8 LLC-10 LLC-12 LLC-14 LLC-16 No. Type Nominal Length
Sifat Mekanis Satuan Length Tolerance Ø Tolerance of point Ø Angle
(4.19 mm) (3.40 mm) (2.77 mm) (2.11 mm) (1.65 mm) (mm) (mm) (mm) (mm) (mm)
(mm)
Ø Kawat mm 4.11 - 4.27 3.32 - 3.48 2.70 - 2.84 2.04 - 2.18 1.60 - 1.70 1 PKU 1½” 38 ± 2.0 2.15 ± 0.06 1.7 - 4.3 5.1 ± 120 0
2 PKU 2” 50 ± 2.5 2.75 ± 0.06 2.2 - 5.5 6.6 ± 120 0
Gr/m 2 50 50 50 50 50 3 PKU 2½” 65 ± 3.0 3.05 ± 0.08 2.4 - 6.1 7.3 ± 120 0
Elongasi (min) % 10 10 10 10 10 4 PKU 3” 75 ± 3.5 3.40 ± 0.08 2.7 - 6.8 7.9 ± 120 0
Tensile Strength (N/mm )2 290 - 540 290 - 540 290 - 540 290 - 540 290 - 540 5 PKU 3½” 90 ± 4.0 3.75 ± 0.08 3.0 - 7.5 8.8 ± 120 0
Adhesion Test XD 2D 2D 2D 2D 2D 6 PKU 4” 100 ± 4.5 4.20 ± 0.10 3.4 - 8.4 9.8 ± 120 0
7 PKU 5” 125 ± 5.0 5.20 ± 0.10 3.7 - 9.2 10.3 ± 120 0
Refer to BS 443-1982 / SNI 03-6154-1999

Made from high grade billets and processed with an advanced Our pre-fabricated rebar mesh is made Standard &
processing technology, our nail wires have excellent corrosion Specification :
Nails Wire of high quality steel bar produced from
resistance, excellent heading & forming ability with low work JIS G 3551 /
Wire Mesh our own quality steel and are welded to-
SNI 07-0663-1995
hardening quality. gether to form a pre-made mesh section.
Available Size :
Various range of diameter Standard & Available Size : With different sizes, the pre-made section is leveled and Diameter; 4mm – 12mm
and tensile strength are Specification : (non) 2.00mm – 5.16 flat with sturdy structure. Depending on the size, our mesh Dimension; 5.4mtr x 2.1mtr
available for making any JIS G 3532 section can be used for road construction, fences, racks,
Annual Capacity : Annual Capacity :
kind of common nails that SNI 07-0040-2006 concrete walls and floors for factory and commercial build-
6.000 MT/Year 120.000 MT/Year
suits your needs. ing. It has been rust-proofed to stand against weather ele-
ments. Our mesh section can be supplied in rolls or panels.
No. Product Nominal Diameter Tol. Ø Tensile Strength

(mm) (N/mm)2
1 RDW - 6 5.16 ± 0.05 460 - 610 Refer to JIS G3532 - 2000 type :
2 RDW - 7 4.57 ± 0.05 540 - 790 - SWMB : Drawn steel wire is applicated for general purposed
3 RDW - 8 4.19 ± 0.05 600 - 860 - SWMN : Drawn steel wire is applicated for nail product
4 RDW - 9 3.76 ± 0.05 640 - 880
5 RDW - 10 3.40 ± 0.04 680 - 920 Refer to SNI 07-0040-2006 type :
6 RDW - 11 3.05 ± 0.04 700 - 960 - Bj K.B : Cooled drawn steel wire is applicated for general purposed
7 RDW - 12 2.77 ± 0.04 720 - 980 - Bj K.P : Cooled drawn steel wire is applicated for nail product
8 RDW - 13 2.41 ± 0.04 780 - 1000
9 RDW - 14 2.11 ± 0.04 820 - 1100
With our ability to process materials

that are assisted by the latest
technology machines and qualified
employees, proving that we can do all
your requests.

Steel Services Center
Bar Services Center
Forming Services Center
Coil Services Center
Service
Center
71 BB
Service Center PT Gunung Raja Paksi Tbk Product Catalogue BB
With facilities spanning over 40.500 Products

Serviced :
Service
Provided :
sqm, the Steel Service Center (SSC)
brings to you the highest quality of Angle (HR), Angle Line :
service in steel manufacturing and Cell Form, Cutting, Punching,
fabrication with the an advanced Channel (UNP), Stamping Angle Line
and precise computerized machines H-Beam (HR), Special Operations : Bending,
such as CNC sawing machines, CNC Honey Comb, Chamfering, Nothing

King Cross, Beam Line : Bending, Cutting
drilling, cutting, punching, bending
Queen Cross, (90o&45o), Drilling Copying
machines, machines for galvanizing & T-Beam, (Honey Comb) Painting
shotblasting etc. Welded Beam, Shot Blasting
Wide Flange, Welded Beam Line : Build
Together with Gunung Raja Paksi’s mainstream products Beam (IWF). Up Beam, Tackling, Welding,
and experienced engineers of EFC, our customers are Straightening
able to buy cut-to-length / cut-to-shape or custom steel Plate Service Center (PSC),
fabrication to their requirement and international quality Forming Service Center (FSC)
standards. Bar Service Center (BSC).
Coil Services Center Steel Services Center
Forming Services Center Bar Services Center

73 Long Products PT Gunung Raja Paksi Tbk
Steel
Applications
75 Steel Application PT Gunung Raja Paksi Tbk
Industrial Buildings : Towers : High Rise Buildings :

Air Pollution Control Transmission Tower Apartment
Equipment Substation Tower Hotel
Cement Plants Telecommunication Tower Office Building
Chemical & Pole Tower Landmark
Petrochemical Plants Monumental Tower Gas Processing &
Factory Billboard Distribution
Iron & Steel Mills & Monitoring Tower Terminal & Cargo Handling
Wood Process Wtertank Tower System
Warehouse
Workshop
Bridges : Low Rise Buildings : Commercial Buildings :

Girdes Bridging Housing / Residence Show Room
Truss Bridging Hospital Supermarket &
Cantilever Bridging Office Building Hypermarket
Arch Bridging Airport / Hangar
Suspension Bridging School
Cable-stayed Bridging
Railway Bridging
GRP is very concerned about the
quality of products and management
system. This is evident from the many
international certifications obtained
such as ISO 9001, ISO 14001, OHSAS
18001, SNI, ABS, JIS Marking, Bureau
Varitas (BV), Lloyd Register (LR), BKI,
Germanischer Lloyd (GL), Det Norske
Veritas (DNV), Nippon Kaiji Kyokai
(NK), and others.
Certifications
79 Certfications PT Gunung Raja Paksi Tbk Product Catalogue 80
Thank you for

choosing GRP as a
solutions to your steel
requirements.
We are confident that our products and services excellence shall
satisfy your requirements and our partnership will continue to grow.
Website GRP Brochure GRP

83 Long Products PT Gunung Raja Paksi Tbk
SHAPING TOMORROW
PT. Gunung Raja Paksi Tbk
Jl. Perjuangan No. 8

Sukadanau, Cikarang Barat
Bekasi 17530
West Java, INDONESIA
Phone: +62 21 890-0111

Fax: +62 21 890-0555

NewGRP Catalogue

Uploaded by

Copyright:

Available Formats

NewGRP Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

NewGRP Catalogue

Uploaded by

Copyright:

Available Formats

PRODUCT

A Better Future 3 Who we are

The services we provides are:

STOCK SCRAP - EAF - LANCLE - TUNDISH - CCM

RAW M ATERIAL IRON MAKING STEEL MAKING

IRON ORE BEAM BLANK B LOOM BILLET SLAB

B A SIC O X YGEN - REHEATING FURNA CE

- COOLING BED - COOLING BED

C O AL COKE BLA ST - STRAIGHTENING

IWF/H BEAM ANGLE

ME TAL STEEL MAKING SSC PRE-FABRIKA SI SMALL SIZE

QUEEN CROOS H BEAM

ANCHOR BO LT CO LOUMN PR A CTISE

BILLETS HONEY COMB UMP

PAKU / NAILS HE AVY CO ATING

(REFINING) COLD ROLLING MILL SLITTING M

BEAM BLANK SHEET PILE

COLD ROLLED COIL CRC SHEET COIL AFTER SLITTING

ROLLING STEEL CONSTRUCTION

PRODUC TS G A LVANIZED STEEL COIL

PRODUC TS A SSEMB LY/WELDING

- SETTING ERW PIPE

Our production products consist

In support to the building and construction industry, we also

Standard & Available Size : Annual Capacity :

Various end products covering all types

Hot Rolled Coil (HCR)

ASTM A36, A283, A131, A529, A572, A573, A633, A709,

JIS SS400, SS490, SS540, SM400, SM490, SM520, SM570

General Structural and Weldable EN S235JR/J0/J2, S275JR/J0/J2/N/NL, S355JR/J0/J2/K2/N/NL/M/ML, S420M/ML, S460M/ML

AS/NZS 200, 250, 300, 350, 400, 450

BS 40, 43, 50, 55

ASTM A285, A516

JIS SMA 400, SMA 490,

ASTM 1042 - 1050

PT Gunung Raja Paksi (GRP) understands the diverse demand EN C 45

Steel, High-Strength Low Alloy, pressure Vessel, Ship Building

Plate ASTM A1006, A1008, A1011CS/DS,

Annual Capacity : 600,000 MT/year for

World class steel plates are manufactured at Gunung Raja

X 46 8 - 25 320 - 525 4357 60 ---- -4 0- ---- -

X 46M 8 - 25 320 - 525 4357 60 ---- -4 0- ---- -

X 60 8 - 25 415 - 565 5207 60 ---- -4 0- -

We can also supply flat products in coil form, whether it is hot-

Standard & Available Size : Annual Capacity :

B8 - 25 245 - 4504 15 760- ---- 40 ------

X 46 8 - 20 320 - 525 435 760 - - - - - 40 - - - - - -

X 52 8 - 20 360 - 530 460 760 - - - - - 40 - - - - - -

X 56 8 - 20 390 - 545 490 760 - - - - - 40 - - - - - -

X 46M 8 - 20 320 - 525 435 760 - - - - - 40 - - - - - -

X 52M 8 - 20 360 - 530 460 760 - - - - - 40 - - - - - -

X 56M 8 - 20 390 - 545 490 760 - - - - - 40 - - - - - -

X 42MO 8 - 20 290 - 495 415 760 - - - - - 40 - - - - - -

SG 255 2554 00 -- -2 8- ---- - --

High Strength Steel YS>300 Mpa

SPECIFICATION GRADE Thick Tensile Testing Impact Testing (CVN)

50 6 - 10 345 450 18M - -

ASTM A 572 / ASME SA 527 55 6 - 10 380 485 17M - -

60 6 - 10 415 520 16M - -

ASTM A 573 / ASME SA 573 70 6 - 10 290 485 - 620 18R - -