Type 437

Type
437
Type 437
Packed knob H4
Conventional design

Safety Relief Valves

– spring loaded

Type 437 Contents Chapter/Page

Packed knob H4
Flanged connection
Materials
Z Available designs 01/02
Z Available designs – materials 01/03
How to order

Z Numbering system 01/04
Z Article numbers 01/06
Dimensions and weights
Z Metric Units [Threaded connection] 01/08
[Flanged connection] 01/09
Z US Units [Threaded connection] 01/10
[Flanged connection] 01/11
Pressure temperature ratings
Z Metric Units + US Units 01/12
Order information – Spare parts 01/13
Available options 01/14
Approvals 01/15
Type 437
Capacities
Cap H2
Long version Z Steam [Metric Units + US Units] 01/16
Z Air [Metric Units + US Units] 01/17
Z Water [Metric Units + US Units] 01/18
Determination of coefficent 01/19
of discharge Kdr /_w
Application range 01/20
of conventional design and long version

LWN 481.01-E 01/01

 Type 437
Available designs
Type 437

40 Cap H2

18 Adjusting screw
with bushing Axial needle 69

19 Lock nut beering

16 Spring plate
12 Spindle
54 Spring
2 Outlet body
17 Spring plate
57 Pin
61 Ball
7 Disc

1 Body
Conventional design Long version
Threaded connection Threaded connection

Outlet flange 2.4

Outlet adaptor 2.1

Inlet flange 48

Conventional design
Flange connection

01/02 LWN 481.01-E

5ZQF

Available designs – materials

Type 437
Materials
Item Component Remarks Type 4373 Type 4374

Threaded 1.41041), 1.4404 1.4404

connection SA 479 4301), SA 479 316L SA 479 316L
1.4404 1.4404
1 Base / Inlet body Flange connection
SA 479 316L SA 479 316L
1.41042), 1.4404 stellited 1.4404 stellited
Long version
SA 479 4302), SA 479 316L stellited SA 479 316L stellited
1.4104 1.4404
2 Outlet body
SA 479 430 SA 479 316L
1.4404 1.4404
2.1 Outlet adaptor Flange connection
316L 316L
1.4404 1.4404
2.4 Outlet flange Flange connection
316L 316L
1.4122 1.4404
Hardened stainless steel SA 316L
d0 6: 1.4404 stellited d0 6: 1.4404 stellited
7 Disc
d0 10: 1.4122 d0 10: 1.4404
Long version
d0 6: 316L stellited d0 6: 316L stellited
d0 10: Hardened stainless steel d0 10: 316L
1.4021 1.4571
420 316Ti
12 Spindle3)
1.4571 1.4571
Long version
316Ti 316Ti
1.4104 1.4404
Chrome steel 316L
16/17 Spring plate3)
1.4404 1.4404
Long version
316L 316L
Adjusting screw 1.4104 / PTFE 1.4104 / PTFE
18
with bushing Chrome steel / PTFE 316L / PTFE
1.0718 1.4404
19 Lock nut
Steel 316L
1.0718 1.4404
40 Cap H2
Steel 316L
1.4404 1.4404
48 Inlet flange Flange connection
316L 316L
1.4310 1.4310
54 Spring
Stainless steel Stainless steel
1.4310 1.4310
57 Pin
Stainless steel Stainless steel
1.3541 1.4401
61 Ball
Hardened stainless steel 316
1.4404 1.4404
69 Axial needle beering Long version
316L 316L
1) Only for male thread DIN ISO 228-1 G3/8, G1/2, G3/4 (Option codes V49, V54, V55).
2) Only for d0 10 with male thread DIN ISO 228-1 G3/8, G1/2, G3/4 (Option codes V49, V54, V55).
3) The items 12 and 17 are combined to one unit.

Please notice:
– Modifications reserved by LESER.
– LESER can upgrade materials without notice.
– Every part can be replaced by other material acc. to customer specification.

LWN 481.01-E 01/03

 Type 437
How to order – Series 437 – Example for numbering system
Type 437

1 Article Number
2 Set Pressure
3 Connections

4374.3142 10 barg V62 V71

Please state unit (in gauge)! Please refer to table

1 2 3 4
“Availabe Connections”
Please do not exceed pressure range on pages 04/04 and 04/05.
437 4 . 314 2 mentioned in the spring charts.
Please state one option code for each,
1 Valve Type 437
inlet and outlet.
Types of sealing

Metal seat
Metal-to-metal
Metal-to-metal stellited
Soft seal (Sealing plate)
SP Vespel-SP1
PCTFE Kel-F
PTFE-FDA Teflon

2 Material code

Code Body material

3 1.4104 (430)
4 1.4404 (316L)

3 Valve code
Identifies valve size, body material
and orifice, refer to page 01/07
and following.

4 Code for lifting device

Code Lifting device

2 Screwed cap H2
3 Pull button H3
4 Packed knob H4

01/04 LWN 481.01-E

Type 437

Type 437
4 Options
5 Documentation
6
Code and Medium

J44 H01 L30 2.0

Type 437 Option code Please select requested documentation:

1 2

Z Base / Inlet body stellited L20 Inspections, tests: Option code 2 . 0

(Type 437 Standard only) DIN EN 10204-3.2: TÜV-Nord
Z Disc stellited J25 Certificate for test pressure M33
1 Code
Z Plastic seal material 1. ASME Section VIII
PTFE “A” J44 LESER CGA (Certificate H03 2. CE / VdTUEV
PCTFE “G” J48 for Global Application) 3. ASME Section VIII
VESPEL SP “T” J49 + CE / VdTUEV
- Inspection certificate 3.1 acc.
Z INCONEL X-750 spring X08
to DIN EN 10204
- Declaration of conformity acc.
2 Medium
to PED 97/23/EC
.1 Gases
.2 Liquids
Material test certificate: .3 Steam
DIN EN 10204-3.1 .0 Steam / Gases / Liquids
(valid only for CE / VdTUEV)
Part Option code
Base / Inlet body H01
Outlet body L34
Cap / lever cover L31
Disc L23

LWN 481.01-E 01/05

 Type 437
How to order – Article numbers
Type 437

Type 437 Male Type 437 Female

Outlet body 1/2" Outlet body 1"
Pull button H3 Cap H2
Conventional design Conventional design

Type 437 Flanged connection Type 437 Male

Outlet body 1" Outlet body 1/2"
Cap H2 Packed knob H4
Conventional design Long version

01/06 LWN 481.01-E

Type 437
How to order – Article numbers

Type 437
Article numbers
Conventional design Long version
Actual Orifice diameter d0 [mm] 10 6 10
Actual Orifice area A0 [mm2] 78.5 28.3 78.5
Actual Orifice diameter d0 [inch] 0.394 0.236 0.394
Actual Orifice area A0 [inch2] 0.122 0.044 0.122
Base / Inlet body material: 1.4104 (430)

H2 Art.-No. 4373. 2602 2622 2612

H3 Art.-No. 4373.
pmax. = 16 barg 2603 – –

H4 Art.-No. 4373. 2604 2624 2614

p [barg] S/G/L 0.1 – 93 S/G 180 – 365 S/G/L 93 –180
p [psig] S/G/L 1.5 – 1349 S/G 2611 – 5294 S/G/L 1349 – 2611
Base / Inlet body material: 1.4404 (316L)

H2 Art.-No. 4374. 3142 3122 3152

H4 Art.-No. 4374. 3144 3124 3154

p [barg] S/G/L 0.1 – 68 S/G 180 – 365 S/G/L 68 –180
p [psig] S/G/L 1.5 – 986 S/G 2611 – 5294 S/G/L 986 – 2611

LWN 481.01-E 01/07

 Type 437
Dimensions and weights – Metric Units
Type 437

Threaded connections
Conventional design Long version
Size Outlet body 1/ 3/ " 1/ " 3/ " 1/ " 3/ "
2" 4 1" 2 4 1" 2 4 1"
Actual Orifice diameter d0 [mm] 10 10 10 6 6 6 10 10 10
Actual Orifice area A0 [mm2] 78.5 78.5 78.5 28.3 28.3 28.3 78.5 78.5 78.5

Weight [kg] 1.2 1.6 1.6 1.4 2.1 2.1 1.4 2.1 2.1
Required installation diameter [mm] 65 80 80 65 80 80 65 80 80

Inlet thread “Female”

Conventional design Long version
Size outlet body 1/ 3/ " 1/ " 3/ " 1/ " 3/ "
2" 4 1" 2 4 1" 2 4 1"
Center to face [mm]
DIN ISO 228-1 G
Inlet 1/2" a 46 46 49 46 46 49 46 46 49
ISO 7-1/BS 21 Rc
3/ ",
1" a
ASME B1.20.1 NPT Inlet 4 56 56 59 56 56 59 56 56 59
Outlet b 30 37 37 30 37 37 30 37 37
Height [mm]
Inlet 1/2" H max. 209 209 212 230 230 233 230 230 233
Inlet 3/4", 1" H max. 219 219 222 240 240 243 240 240 243

Inlet thread “Male”

Conventional design Long version
Size outlet body 1/ 3/ " 1/ " 3/ " 1/ " 3/ "
2" 4 1" 2 4 1" 2 4 1"
Center to face [mm]
Inlet a 33 33 36 33 33 36 33 33 36
DIN ISO 228-1 G
Outlet b 30 37 37 30 37 37 30 37 37
ISO 7-1/BS 21 R
Inlet a 31 31 34 31 31 34 31 31 34
ASME B1.20.1 NPT
Outlet b 30 37 37 30 37 37 30 37 37
Height [mm]
Conventional design Long version
Size inlet thread 3/ 1/ 3/ " 3/ 1/ 3/ "
8" 2" 4 1" 8" 2" 4 1"
DIN ISO 228-1 G H max. 208 210 212 217 229 231 233 238
ISO 7-1/BS 21 R H max. – 213 214 220 – 234 235 241
ASME B1.20.1 NPT H max. – 216 216 224 – 237 237 245

Length of screwed end “c” [mm]

Size inlet thread 3/ 1/ 3/ "
8" 2" 4 1"
DIN ISO 228-1 G 12 14 16 18
ISO 7-1/BS 21 R – 19 20 23
ASME B1.20.1 NPT – 22 22 27
Available threaded connections refer to page 04/04.

Required installation diameter Conventional design – Female thread Conventional design – Male thread Long version – male thread

01/08 LWN 481.01-E

Type 437
Dimensions and weights – Metric Units

Type 437
Flanged connection
Conventional design Long version
Actual Orifice diameter d0 [mm] 10 6 10
Actual Orifice area A0 [mm2] 78.5 28.3 78.5
DIN EN 1092-1 (Available flange sizes refer to page 04/05)
Flange rating class PN 40
Center to face [mm] Inlet a 100 100 100
Outlet b 100 100 100
Height [mm] H max. 263 284 284
Flange rating class * PN 160
Center to face [mm] Inlet a 103 103 103
Outlet b 100 100 100
Height [mm] H max. 266 287 287
ASME B 16.5 (Available flange sizes refer to page 04/05)
Flange rating class 150
Center to face [mm] Inlet a 100 100 100
Outlet b 100 100 100
Height [mm] H max. 263 284 284
Flange rating class ) 300
Center to face [mm] Inlet a 103 103 103
Outlet b 100 100 100
Height [mm] H max. 266 287 287
Note The outlet dimension b can differ at special combinations of nominal diameter and pressure range if flanged connections are used at the inlet and outlet.
Special dimensions are possible. More information at sales@leser.com

Weight
To calculate the total weight use the formula: mT = mN + mF (Inlet) + mF (Outlet)
Weight net [kg]
(without inlet and outlet flange) mN 2.4 2.8 2.8

Flange dimensions
DIN EN 1092-1 / Flange rating PN ASME B16.5 / Flange rating
Size 40 100 160 250 320 400 Size 150 300 600 900 1500 2500
DN 15 NPS 1/2"
Flange thickness [mm] s 18 – 22 28 28 30 14 18 18 26 26 30.2
Weight slip on flange [kg] mF 0.8 – 1.2 2.5 2.5 3.6 0.6 0.9 0.9 2.1 2.1 3
DN 20 NPS 3/4"
Flange thickness [mm] s 20 22 – – – – 15 18 18 25.4 25.4 32
Weight slip on flange [kg] mF 1.1 1.3 – – – – 0.8 1.4 1.4 2.3 2.3 3.5
DN 25 NPS 1"
Flange thickness [mm] s 22 – 26 30 36 40 17 21.5 21.5 32.5 32.5 40
Weight slip on flange [kg] mF 1.3 – 2.6 3.5 5 7.5 1 2.1 21 4.1 4.1 5.1

a
s s
s s

Conventional design Long version

LWN 481.01-E 01/09

 Type 437
Dimensions and weights – US Units
Type 437

Threaded connections
Conventional design Long version
Size Outlet body 1/ 3/ " 1/ " 3/ " 1/ " 3/ "
2" 4 1" 2 4 1" 2 4 1"
Actual Orifice diameter d0 [inch] 0.394 0.394 0.394 0.236 0.236 0.236 0.394 0.394 0.394
Actual Orifice area A0 [inch2] 0.122 0.122 0.122 0.044 0.044 0.044 0.122 0.122 0.122

Weight [lbs] 2.6 3.5 3.5 3.1 4.6 4.6 3.1 4.6 4.6
Required installation diameter [inch] 29/16 35/32 35/32 29/16 35/32 35/32 29/16 35/32 35/32

Inlet thread “Female”

Conventional design Long version
Size outlet body 1/ 3/ " 1/ " 3/ " 1/ " 3/ "
2" 4 1" 2 4 1" 2 4 1"
Center to face [inch]
DIN ISO 228-1 G
Inlet 1/2" a 113/16 113/16 115/16 113/16 113/16 115/16 113/16 113/16 115/16
ISO 7-1/BS 21 Rc
ASME B1.20.1 NPT Inlet 3/4", 1" a 27/32 27/32 25/16 27/32 27/32 25/16 27/32 27/32 25/16
Outlet b 13/16 115/32 115/32 13/16 115/32 115/32 13/16 115/32 115/32
Height [inch]
Inlet 1/2" H max. 87/32 87/32 811/32 87/32 87/32 811/32 87/32 87/32 811/32
Inlet 3/4", 1" H max. 85/8 85/8 83/4 97/16 97/16 99/16 97/16 97/16 99/16

Inlet thread “Male”

Conventional design Long version
Size outlet body 1/ 3/ " 1/ " 3/ " 1/ " 3/ "
2" 4 1" 2 4 1" 2 4 1"
Center to face [inch]
Inlet a 15/16 15/16 113/32 15/16 15/16 113/32 15/16 15/16 113/32
DIN ISO 228-1 G
Outlet b 13/16 115/32 115/32 13/16 115/32 115/32 13/16 115/32 115/32
ISO 7-1/BS 21 R
Inlet a 17/32 17/32 111/32 17/32 17/32 111/32 17/32 17/32 111/32
ASME B1.20.1 NPT
Outlet b 13/16 115/32 115/32 13/16 115/32 115/32 13/16 115/32 115/32
Height [inch]
Conventional design Long version
Size inlet thread 3/ 1/ 3/ " 3/ 1/ 3/ "
8" 2" 4 1" 8" 2" 4 1"
DIN ISO 228-1 G H max. 83/16 81/4 811/32 817/32 9 93/32 95/32 93/8
ISO 7-1/BS 21 R H max. – 8 3 /8 813/32 821/32 – 97/32 91/4 915/32
ASME B1.20.1 NPT H max. – 1
8 /2 81/2 813/16 – 95/16 95/16 921/32

Length of screwed end “c” [inch]

Size inlet thread 3/ " 1/ 3/ "
8 2" 4 1"
DIN ISO 228-1 G 15/ 9/ 5/ 23/
32 16 8 32
ISO 7-1/BS 21 R – 3/ 25/ 29/
4 32 32
ASME B1.20.1 NPT – 7/ 7/ 11/16
8 8

Available threaded connections refer to page 04/04.

Required installation diameter Conventional design – Female thread Conventional design – Male thread Long version – male thread

01/10 LWN 481.01-E

Type 437
Dimensions and weights – US Units

Type 437
Flanged connection
Conventional design Long version
Actual Orifice diameter d0 [inch] 0.394 0.236 0.394
Actual Orifice area A0 [inch2] 0.122 0.044 0.122
DIN EN 1092-1 (Available flange sizes refer to page 04/05)
Flange rating PN 40
Center to face [inch] Inlet a 315/16 315/16 315/16
Outlet b 315/16 315/16 315/16
Height [inch] H max. 1011/32 113/16 113/16
Flange rating * PN 160
Center to face [inch] Inlet a 41/16 41/16 41/16
Outlet b 315/16 315/16 315/16
Height [inch] H max. 1015/32 115/16 115/16
ASME B 16.5 (Available flange sizes refer to page 04/05)
Flange rating class 150
Center to face [inch] Inlet a 315/16 315/16 315/16
Outlet b 315/16 315/16 315/16
Height [inch] H max. 1011/32 113/16 113/16
Flange rating class ) 300
Center to face [inch] Inlet a 41/16 41/16 41/16
Outlet b 315/16 315/16 315/16
Height [inch] H max. 1015/32 115/16 115/16
Note The outlet dimension b can differ at special combinations of nominal diameter and pressure range if flanged connections are used at the inlet and outlet.
Special dimensions are possible. More information at sales@leser.com

Weight
To calculate the total weight use the formula: mT = mN + mF (Inlet) + mF (Outlet)
Weight net [lbs]
(without inlet and outlet flange) mN 5.3 6.2 6.2

Flange dimensions
DIN EN 1092-1 / Flange rating PN ASME B16.5 / Flange rating
Size 40 100 160 250 320 400 Größe 150 300 600 900 1500 2500
DN 15 NPS 1/2"
Flange thickness [inch] s 23/ – 7/ 23/ 13/32 13/16 9/ 23/ 23/ 13/32 13/32 13/16
32 8 32 16 32 32
Weight slip on flange [lbs] mF 1.8 – 2.6 5.5 5.5 7.9 1.3 2.0 2.0 4.6 4.6 6.6
DN 20 NPS 3/4"
Flange thickness [inch] s 25/ 7/ – – – – 19/ 23/ 23/ 1 1 1 1 /4
32 8 32 32 32

Weight slip on flange [lbs] mF 2.4 2.9 – – – – 1.8 3.1 3.1 5.0 5.0 7.7
DN 25 NPS 1"
Flange thickness [inch] s 7/ – 11/32 13/16 113/32 19/16 21/ 27/ 27/ 19/32 19/32 19/16
8 32 32 32
Weight slip on flange [lbs] mF 2.9 – 5.7 7.7 11.0 16.5 2.2 4.6 4.6 9.0 9.0 11.2

a
s s
s s

Conventional design Long version

LWN 481.01-E 01/11

 Type 437
Pressure temperature ratings
Type 437

Metric Units
Actual Orifice diameter d0 [mm] 6 10
Actual Orifice area A0 [mm2] 28.3 78.5
Body material: 1.4104 (430)
Base / 3/ " 1/ " 3/ " 3/ " 1/ " 3/ "
Connection size 8 2 4 1" 8 2 4 1"
Inlet Body Pressure rating PN 400 PN 320
Outlet body Pressure rating PN 160 PN 160
Minimum
p [barg] S/G/L 180 [S/G only] 0.1
set pressure
Maximum 16 [only H3]
p [barg] S/G/L 365 [S/G only]
set pressure 180
Temperature min [°C ] -10
acc. to DIN EN max [°C ] +220
Temperature min [°C ] -29
acc. to ASME max [°C ] +220
Body material: 1.4404 (316L)
Base / 3/ " 1/ " 3/ " 3/ " 1/ " 3/ "
Connection size 8 2 4 1" 8 2 4 1"
Inlet Body Pressure rating PN 400 PN 320
Outlet body Pressure rating PN 160 PN 160
Minimum
p [barg] S/G/L 180 [S/G only] 0.1
set pressure
Maximum
p [barg] S/G/L 365 [S/G only] 180
set pressure
Temperature min [°C ] -270
acc. to DIN EN max [°C ] +280
Temperature min [°C ] -268
acc. to ASME max [°C ] +280

US Units
Actual Orifice diameter d0 [inch] 0,236 0,394
Actual Orifice area A0 [inch2] 0,044 0,122
Body material: 1.4104 (430)
Base /
3/ " 1/ " 3/ 3/ " 1/ " 3/ "
Inlet Body Connection size 8 2 4" 1" 8 2 4 1"

Minimum
p [psig] S/G/L 2611 1.5
set pressure
Maximum 145 [only H3]
p [psig] S/G/L 5294
set pressure 2611
Temperature min [°F ] +14
acc. to DIN EN max [°F ] +428
Temperature min [°F ] -20
acc. to ASME max [°F ] +428
Body material: 1.4404 (316L)
Base /
3/ " 1/ " 3/ 3/ " 1/ " 3/ "
Inlet Body Connection size 8 2 4" 1" 8 2 4 1"

Minimum
p [psig] S/G/L 2611 1.5
set pressure
Maximum
p [psig] S/G/L 5294 2611
set pressure
Temperature min [°F ] -450
acc. to DIN EN max [°F ] +536
Temperature min [°F ] -450
acc. to ASME max [°F ] +536

01/12 LWN 481.01-E

Type 437
Order information – Spare parts

Type 437
Spare parts
Actual Orifice diameter d0 [mm] 6 10
Actual Orifice area A0 [mm2] 28.3 78.5
Actual Orifice diameter d0 [inch] 0.236 0.394
Actual Orifice area A0 [inch2] 0.044 0.122
Body (Item 1): Male thread Material-No. / Art.-No.
3/ " 1/ " 3/ " 3/ " 1/ " 3/ "
Connection Size 8 2 4 1" 8 2 4 1"
DIN ISO 228-1 G 1.4104 – – – – 136.5239.9000 136.4439.9000 136.4539.9000 136.5839.9000
316L – – – – 136.5249.9000 136.4449.9000 136.4549.9000 136.4849.9000
316L stellited 136.5169.9000 136.4369.9000 136.5569.9000 136.6769.9000 – – – –
R 316L – – – – – 136.4449.9220 136.4549.9220 136.5849.9220
316L stellited – 136.4369.9220 136.5569.9220 136.6769.9220 – – – –
ASME B1.20.1 NPT 316L – – – – – 136.4449.9204 136.4549.9204 136.5849.9204
316L stellited – 136.4369.9204 136.5569.9204 136.6769.9204 – – – –

Body (Item 1): Female thread Material-No. / Art.-No.

3/ " 1/ " 3/ " 3/ " 1/ " 3/ "
Connection Size 8 2 4 1" 8 2 4 1"
DIN ISO 228-1 G 316L – – – – – 136.4449.9210 136.4549.9210 136.5849.9210
316L stellited – 136.4369.9210 136.5569.9210 136.6769.9210 – – – –
ISO 7-1/BS 21 Rc 316L – – – – – 136.4449.9222 136.4549.9222 136.5849.9222
316L stellited – 136.4369.9222 136.5569.9222 136.6769.9222 – 136.4449.9222 136.4549.9222 136.5869.9222
ASME B1.20.1 NPT 316L – – – – – 136.4449.9211 136.4549.9211 136.5849.9211
316L stellited – 136.4369.9211 136.5569.9211 136.6769.9211 – – – –

Body (Item 1): Flange design Material-No. / Art.-No.

DN 15 / PN 40 – 400 316L – 136.6349.9208
NPS 1/2" CL150 316L – 136.4449.9202
CL300 – 2500 316L 136.4369.9208 136.6349.9208
DN 20 / PN 40 – 160 316L 136.5569.9208 136.4549.9208
NPS 3/4" CL150 – 2500 316L 136.5569.9208 136.4549.9208
DN 25 / PN 40 – 400 316L 136.6769.9208 136.4449.9208
NPS 1" CL150 – 2500 316L 136.6769.9208 136.4449.9208
Disc (Item 7): Metal to metal Material-No. / Art.-No.
Disc 1.4122 420 RM – 205.3339.9000

1.4404 316L – 205.3349.9000

316L stellited 205.3169.9000 –
Disc with sealing plate (Item 7) Material-No. / Art.-No.
Disc PTFE “A” 200.9249.9005 200.8449.9005
1.4404 PCTFE “G” 200.9249.9006 200.8449.9006
SP “T” 200.9249.9007 200.8449.9007
Sealing plate (Item 7.3) Material-No. / Art.-No.
Sealing PTFE “A” 236.3259.0000 236.2859.0000
plate PCTFE “G” 236.3269.0000 236.2869.0000
SP “T” 236.3279.0000 236.2879.0000
Pin (Item 57) Material-No. / Art.-No.
Pin 1.4310 480.2405.0000 480.2405.0000
Ball (Item 61) Material-No. / Art.-No.
Ball Ball Ø [mm] 6 6
1.4401 510.0104.0000 510.0104.0000

LWN 481.01-E 01/13

 Type 437
Available Options
Type 437

Male thread Female thread Flanged version

Stellited sealing surface Disc with inserted sealing plate

J25: Disc stellited J44: PTFE-FDA “A”
L20: Base/inlet body J48: PCTFE “G”
J49: VESPEL-SP1 “T”

Heating jacket Test gag INCONEL X-750 spring

H29 J70: H2 X08

Special material Special material

2.4610 Hastelloy® C4 2.4610 HASTELLOY C4
2.4360 Monel® 400 2.4360 MONEL 400
1.4462 Duplex 1.4462 DUPLEX

Code
YYYY
Code
YYYY
Code Code
Code Code
XXXX ZZZZ
XXXX ZZZZ

01/14 LWN 481.01-E

Type 437
Approvals

Type 437
Approvals
Actual Orifice diameter d0 [mm] 6 10
Actual Orifice area A0 [mm2] 28.3 78.5
Actual Orifice diameter d0 [inch] 0.236 0.394
Actual Orifice area A0 [inch2] 0.044 0.122
Europe Coefficient of discharge Kdr
PED / DIN EN ISO 4126-1 Approval No. 0720201110008/0/21-1
S/G 0.72 0.50
L – 0.37
Germany Coefficient of discharge _w
PED / AD 2000-Merkblatt A2 Approval No. TÜV SV 980
S/G 0.72 0.50
L – 0.37
United States Coefficient of discharge K
ASME Sec. VIII Div. 1 Zulassungs-Nr. – M 37213
D/G – 0.458
Zulassungs-Nr. – M 37189
F – 0.333
Canada Coefficient of discharge K
CRN Approval No. The current approval no. can be found at www.leser.com
S/G – 0.458
L – 0.333
China Coefficient of discharge _w
AQSIQ Approval No. The current approval no. can be found at www.leser.com
S/G 0.72 0.50
L – 0.37
Russia Coefficient of discharge _w
GOST R / RTN Approval No. The current approval no. can be found at www.leser.com
S/G 0.72 0.50
L – 0.37
Kazakhstan Coefficient of discharge _w
GOST-K Approval No. The current approval no. can be found at www.leser.com
S/G 0.45 0.80
L 0.32 0.58
Belarus Coefficient of discharge _w
GOSPROMNAZADOR Approval No. The current approval no. can be found at www.leser.com
S/G 0.45 0.80
L 0.32 0.58
Classification societies Homepage
Bureau Veritas BV www.bureauveritas.com
Det Norske Veritas DNV www.dnv.com The valid certification number is changed with every reneval.
Germanischer Lloyd GL www.gl-group.com
Lloyd‘s Register EMEA LREMEA www.lr.org A sample certificate including the valid certification number
Registro Italiano Navale RINA www.rina.org can be found at www.leser.com
U.S. Coast Guard U.S.C.G www uscg.org

Rated slope
Within the capacity certification according to ASME Sec. VIII Div. 1 Fluid Rated slope Type 437
the coefficients of discharge for Series 437 are issued as “rated slope S 2.86 lb / hr / PSIA
values” instead of K values. Rated slope values can be converted into
G 1.02 SCFM / PSIA
K values. The table above shows the converted K values. The original
rated slope values are listed in the table below. L 1.54 GPM 3PSID

LWN 481.01-E 01/15

 Type 437
Capacities – Steam
Type 437

Capacities for saturated steam according to AD 2000-Merkblatt A2, Capacities for saturated steam according to ASME Section VIII (UV),
based on set pressure plus 10 % overpressure.Capacities at 1 bar based on set pressure plus 10% overpressure. Capacities at 30 psig
(14.5 psig) and below are based on 0.1 bar (1.45 psig) overpressure (2.07 bar) and below are based on 3 psig (0.207 bar) overpressure.

Metric Units AD 2000-Merkblatt A2 [kg/h] US Units ASME Section VIII [lb/h]

Act. Orifice dia. d0 [mm] 6 10 Act. Orifice dia. d0 [inch] 0.236 0.394
Act. Orifice area A0 [mm2] 28.3 78.5 Act. Orifice area A0 [inch2] 0.044 0.122
LEOS/G*) [inch2] 0.021 0.057 LEOS/G*) [inch2] 0.021 0.057
Set pressure [bar] Capacities [kg/h] Set pressure [psig] Capacities [lb/h]
0.1 12 15 94
0.2 17 20 108
0.5 29 30 137
1 43 40 168
2 70 50 200
3 94 60 232
4 118 70 263
5 141 80 295
6 164 90 326
7 186 100 358
8 209 120 421
9 232 140 484
10 255 160 547
12 301 180 611
14 346 200 674
16 392 220 737
No satureted steam application in set pressure range
No satureted steam application in set pressure range

18 437 240 800

20 483 260 863
22 528 280 926
24 573 300 990
26 619 320 1053
28 666 340 1116
30 712 360 1179
32 758 380 1242
34 803 400 1306
36 849 420 1369
38 896 440 1432
40 943 460 1495
42 990 480 1558
44 1038 500 1621
46 1085 600 1937
48 1133 700 2253
50 1181 800 2569
60 1421 900 2885
70 1670 1000 3201
80 1921 1100 3516
90 2185 1200 3832
100 2451 1300 4148
110 2735 1400 4458
120 3032 1500 4803
130 3345 2000 6641
140 3688 2500 8788
150 4044
160 4445
170 4880
180 5401
*) LEOS/G = LESER Effective Orifice steam / gas please refer to page 00/11
How to use capacity-sheets refer to page 00/09

01/16 LWN 481.01-E

Type 437
Capacities – Air

Type 437
Capacities for air according to AD 2000-Merkblatt A2, based on set Capacities for air according to ASME Section VIII (UV), based on
pressure plus 10 % overpressure at 0 °C and 1013 mbar. Capacities set pressure plus 10% overpressure at 60 °F (16 °C). Capacities at
at 1 bar (14.5 psig) and below are based on 0.1 bar (1.45 psig) over- 30 psig (2.07 bar) and below are based on 3 psig (0.207 bar) over-
pressure. pressure.

Metric Units AD 2000-Merkblatt A2 [mn3/h] US Units ASME Section VIII [S.C.F.M.]

Act. Orifice dia. d0 [mm] 6 10 Act. Orifice dia. d0 [mm] 0.236 0.394
Act. Orifice area A0 [mm2] 28.3 78.5 Act. Orifice area A0 [mm2] 0.044 0.122
LEOS/G*) [inch2] 0.021 0.057 LEOS/G*) [inch2] 0.021 0.057
Set pressure [bar] Capacities [mn3/h] Set pressure [psig] Capacities [S.C.F.M.]
0.1 14 15 33
0.2 19 20 39
0.5 34 30 49
1 51 40 60
2 84 50 71
3 115 60 83
4 145 70 94
5 174 80 105
6 204 90 117
7 233 100 128
8 262 120 150
9 292 140 173
10 321 160 195
12 380 180 218
14 439 200 241
16 498 220 263
18 556 240 286
20 615 260 308
22 674 280 331
24 733 300 353
26 792 320 376
28 851 340 398
30 909 360 421
32 968 380 443
34 1027 400 466
36 1086 420 489
38 1145 440 511
40 1204 460 534
42 1262 480 556
44 1321 500 479
46 1380 600 692
48 1439 700 804
50 1498 800 917
60 1792 900 973
70 2086 1000 1143
80 2380 1100 1255
90 2674 1200 1368
100 2969 1300 1481
110 3263 1400 1594
120 3557 1500 1706
130 3851 2000 2270
140 4145 2500 2834
150 4439 3000 1225
160 4734 3500 1429
170 5028 4000 1632
180 5322 4500 1835
190 2911 5000 2039
200 3064 5500 2242
210 3216
220 3369
230 3521
240 3674
250 3826
260 3979
270 4131
280 4284
290 4436
300 4589
310 4741
320 4894
330 5046
340 5199
350 5351
360 5504
370 5656
380 5809
*) LEOS/G = LESER Effective Orifice steam / gas please refer to page 00/11
How to use capacity-sheets refer to page 00/09

LWN 481.01-E 01/17

 Type 437
Capacities – Water
Type 437

Capacities for water according to AD 2000-Merkblatt A2, based on set Capacities for water according to ASME Section VIII (UV), based on set
pressure plus 10 % overpressure at 20 °C (68 °F). Capacities at 1 bar pressure plus 10 % overpressure at 70 °F (21 °C). Capacities at 30 psig
(14.5 psig) and below are based on 0.1 bar (1.45 psig) overpressure. (2.07 bar) and below are based on 3 psig (0.207 bar) overpressure.

Metric Units AD 2000-Merkblatt A2 [103kg/h] US Units ASME Section VIII [US-G.P.M.]

Act. Orifice dia. d0 [mm] 6 10 Act. Orifice dia. d0 [inch] 0.236 0.394
Act. Orifice area A0 [mm2] 28.3 78.5 Act. Orifice area A0 [inch2] 0.044 0.122
LEOL*) [inch2] 0.021 0.062 LEOL*) [inch2] 0.021 0.062
Set pressure [bar] Capacities [103kg/h] Set pressure [psig] Capacities [US-G.P.M.]
0.1 0.63 15 6.54
0.2 0.77 20 7.39
0.5 1.08 30 8.86
1 1.5 40 10.2
2 2.1 50 11.4
3 2.5 60 12.5
4 2.9 70 13.5
5 3.3 80 14.5
6 3.6 90 15.3
7 3.9 100 16.2
8 4.1 120 17.7
9 4.4 140 19.1
10 4.6 160 20.5
12 5.1 180 21.7
14 5.5 200 22.9
16 5.9 220 24
No TÜV approval, useable for thermal expansion

No TÜV approval, useable for thermal expansion

18 6.2 240 25
20 6.6 260 26.1
22 6.9 280 27.1
24 7.2 300 28
26 7.5 320 28.9
28 7.8 340 29.8
30 8 360 30.7
32 8.3 380 31.5
34 8.6 400 32.3
36 8.8 420 33.1
38 9 440 33.9
40 9.3 460 34.7
42 9.5 480 35.4
44 9.7 500 36.2
46 9.9 600 39.6
48 10.2 700 42.8
50 10.4 800 45.7
60 11.4 900 48.5
70 12.3 1000 51.5
80 13.1 1100 53.6
90 13.9 1200 56
100 14.7 1300 58.3
110 15.4 1400 60.5
120 16.1 1500 62.6
130 16.7 2000 72.3
140 17.4 2500 80.8
150 18
160 18.5
170 19.1
180 19.7
*) LEOL = LESER Effective Orifice liquids please refer to page 00/11
How to use capacity-sheets refer to page 00/09

01/18 LWN 481.01-E

Type 437
h = Lift [mm]
Determination of coefficent of discharge d0 = Flow diameter [mm] of selected safety
in case of lift restriction or back pressure valve, refer to table article numbers
h/d0 = Ratio of lift / flow diameter

Type 437
pa0 = Back pressure [bara]
p0 = Set pressure [bara]
pa0 / p0 = Ratio of back pressure / set pressure
Kdr = Coefficient of discharge
acc. to DIN EN ISO 4126-1
Diagram for evaluation of ratio of lift / flow diameter (h/d0)
in reference to the coefficient of discharge (Kdr /_w) _w = Coefficient of discharge
acc. to AD 2000-Merkblatt A2
Kb = Back pressure correction factor
acc. to API 520 topic 3.3
Kdr =_w = f (h/d0) How to use please refer to page 00/08

A lift restriction ist not applicable

because the actual design and
the certified lift are
) 1.5 mm / 1/16 inch.

Diagram for evaluation of ratio of the coefficient of discharge (Kdr /_w)

in reference to the ratio of back pressure / set pressure (pa0 /p0)

Kdr = αw = f (pa0/p0) and Kb = f (pa0/p0)

0.8 1.1

1.0
0.7
d0 6 "S/G"
0.9

0.6
0.8

0.5
0.7
d0 10 "S/G"
0.6
Back pressure correction factor Kb

0.4
Coefficient of discharge Kdr / αw

0.5

0.3 0.4

0.3
0.2
0.2
0.1
0.1

0 0
0.3 0.4 0.5 0.6 0.7 0.8 0.9
Ratio of back pressure / set pressure pa0 / p0
0.835

LWN 481.01-E 01/19

 Type 437
Application range of conventional design and long version
Type 437

Application range

Long version
S/G/L S/G
Conventional design
S/G/L
Act. Orifice d0 [mm] 6
Type 4373

Act. Orifice d0 [mm] 10 Act. Orifice d0 [mm] 10 diameter [inch] 0.236

diameter [inch] 0.394 diameter [inch] 0.394 Act. Orifice A0 [mm2] 28.3
Act. Orifice A0 [mm2] 78.5 Act. Orifice A0 [mm2] 78.5 area [inch2] 0.044
area [inch2] 0.122 area [inch2] 0.122
Components Materials
Components Materials Components Materials
Base / 1.4404 Stellited
Base / 1.4104 Base / 1.4104 Inlet Body SA 479 316L
Inlet Body SA 479 430 Inlet Body SA 479 430 Stellited
Disc 1.4122 Disc 1.4122 Disc 1.4404 Stellited
Hardened Hardened SA 479 316L
stainless steel stainless steel Stellited Set pressure
p [psig]

0 986 1349 2611 4786 5294 5511

0 68 93 180 330 365 380
Set pressure
Long version p [bar]
Also useable above 330 bar (4786 psig) but
S/G/L S/G TÜV requirements will not be fulfilled

Conventional design
S/G/L
Act. Orifice d0 [mm] 6
Type 4374

Act. Orifice d0 [mm] 10 diameter [inch] 0.236

Act. Orifice d0 [mm] 10
diameter diameter [inch] 0.394 Act. Orifice A0 [mm2] 28.3
[inch] 0.394
Act. Orifice A0 [mm2] 78.5 area [inch2] 0.044
Act. Orifice A0 [mm2] 78.5
area area [inch2] 0.122
[inch2] 0.122
Components Materials
Components Materials Components Materials Base / 1.4404 Stellited
Base / 1.4404 Base / 1.4404 Inlet Body SA 479 316L
Inlet Body SA 479 316L Inlet Body SA 479 316L Stellited
Disc 1.4404 Stellited
Disc 1.4404 Disc 1.4404 SA 479 316L
SA 479 316L SA 479 316L Stellited

01/20 LWN 481.01-E