Cat 0003

Type
Type 462
Plain lever H3
462
Safety Relief Valves
– spring loaded
Contents Chapter/Page
Materials
• Available designs 07/02
• Available designs – materials 07/03
How to order
• Numbering system 07/04
• Article numbers 07/06
Dimensions and weights
• Metric Units [Threaded connection] 07/08
[Flanged connection] 07/09
• US Units [Threaded connection] 07/10
[Flanged connection] 07/11
Pressure temperature ratings
• Metric Units 07/12
Type 462 • US Units 07/13
Cap H2
Type 462
Order information – Spare parts 07/14

Available options 07/16
Approvals 07/17
Capacities
• Metric Units [Steam, Air, Water] 07/18
• US Units [Steam, Air, Water] 07/19
Determination of coefficent 07/20
of discharge Kdr /αw
LWN 481.01-E 07/01

Type 462
How to order – Article numbers
Type 462 Male Type 462 Female

Packed lever H4 Cap H2
Conventional design Conventional design
Type 462
Type 462 Type 462

Cap H2 Cap H2
Conventional design Balanced bellows
Flanged connection
07/06 LWN 481.01-E

Type 462
How to order – Article numbers
Article numbers
O-ring material NBR “N” J30
CR “K” J21
EPDM “D” J22
FKM “L” J23
FFKM “C” J20
Actual Orifice diameter d0 [mm] 9 13 17,5
Actual Orifice area A0 [mm2] 63,9 133 241
Actual Orifice diameter d0 [inch] 0,354 0,512 0,689
Actual Orifice area A0 [inch2] 0,099 0,206 0,374
Outlet chamber casted
Inlet body 1.4104 H2 Art.-No. 4623. 2902 2912 2922
Outlet body 0.7043 H3 Art.-No. 4623. 2903 2913 2923
Bonnet 0.7043 H4 Art.-No. 4623. 2904 2914 2924
p [barg] 0,5 – 250 0,5 – 180 0,5 – 92,5
S/G/L
p [psig] 7,3 – 3626 7,3 – 2911 7,3 – 1342
Outlet chamber deep-drawn
Inlet body 1.4404 H2 Art.-No. 4622. 3772 3782 3792
Outlet body 1.4404 H3 Art.-No. 4622. 3773 3783 3793
Bonnet 1.0460 H4 Art.-No. 4622. 3774 3784 3794
p [barg] 0,5 – 250 0,5 – 180 0,5 – 92,5
S/G/L
p [psig] 7,3 – 3626 7,3 – 2611 7,3 – 1342
Outlet chamber deep-drawn
All body and 1.4404 H2 Art.-No. 4624. 2952 2962 2972
trim parts H4 Art.-No. 4624. 2954 2964 2974
p [barg] 0,5 – 250 0,5 – 180 0,5 – 92,5
S/G/L
p [psig] 7,3 – 3626 7,3 – 2611 7,3 – 1342
For selection of inlet and outlet connection please refer to page 09/06 – 09/07.
Type 462
LWN 481.01-E 07/07

Type 462
Available designs
40 Cap H2
18 Adjusting screw
with bushing
19 Lock nut
9 Bonnet
16 Spring plate
54 Spring
12 Spindle
17 Spring plate
14 Split ring
60 Gasket
8 Guide
57 Pin
61 Ball
7 O-ring disc
2 Outlet body
1 Inlet body
Conventional design Conventional design
Threaded connection Threaded connection
11 Bonnet Outlet flange

Type 462
2.4
spacer
15 Bellows Outlet adaptor 2.1
60 Gasket
Inlet flange 48
Balanced bellows Conventional design

Threaded connection Flange connection
07/02 LWN 481.01-E

Type 462
Available designs – materials
Materials
Item Component Remarks Type 4623 Type 4622 Type 4624
Threaded 1.4104 1.4404 1.4404

connection SA 479 316L SA 479 316L
1 Base / Inlet body
1.4404 1.4404 1.4404
Flange connection
SA 479 316L SA 479 316L SA 479 316L
0.7043 1.4404 1.4404
2 Outlet body
Ductile Gr. 60-40-18 SA 479 316L SA 479 316L
1.4404 1.4404 1.4404
2.1 Outlet adaptor Flange connection
316L 316L 316L
1.4404 1.4404 1.4404
2.4 Outlet flange Flange connection
316L 316L 316L
1.4404 1.4404 1.4404
7 O-ring disc
SA 479 316L SA 479 316L SA 479 316L
NBR NBR NBR
“N”
Nitrile-Butadiene Nitrile-Butadiene Nitrile-Butadiene
CR CR CR
“K”
Chloroprene Chloroprene Chloroprene
EPDM EPDM EPDM
7.4 Soft seal O-ring “D”
Ethylen-Propylene-Diene Ethylen-Propylene-Diene Ethylen-Propylene-Diene
FPM FPM FPM
“L”
Fluorocarbon Fluorocarbon Fluorocarbon
FFKM FFKM FFKM
“C”
Perflouro Perflouro Perflouro
1.4104 tenifer 1.4104 tenifer 1.4404
Chrome steel tenifer Chrome steel tenifer 316L
8 Guide
Balanced 1.4404 / SA 316L 1.4404 / SA 316L 1.4404 / SA 316L
bellows design Upper connection of balanced bellows Upper connection of balanced bellows Upper connection of balanced bellows
0.7043 1.0460 1.4404
Ductile Gr. 60-40-18 Carbon steel 316L
9 Bonnet
Balanced 1.4404 1.4404 1.4404
bellows design 316L 316L 316L
Balanced 1.4404 1.4404 1.4404
11 Bonnet spacer
1.4021 1.4404 1.4404
420 316L 316L
12 Spindle
Balanced 1.4404 1.4404 1.4404
1.4104 1.4104 1.4404
14 Split ring
Chrome steel Chrome steel 316L
Balanced 1.4571 1.4571 1.4571
15 Bellows
bellows design 316Ti 316Ti 316Ti
1.0718 1.0718 1.4404
16/17 Spring plate
Steel Steel 316L
Adjusting screw 1.4104 / PTFE 1.4104 / PTFE 1.4104 / PTFE
18
with bushing Chrome steel / PTFE Chrome steel / PTFE Chrome steel / PTFE
Type 462
1.4104 1.4104 1.4404

19 Lock nut
430 430 316L
1.0718 1.0718 1.4404
40 Cap H2
Steel Steel 316L
1.4404 1.4404 1.4404
48 Inlet flange Flange connection
316L 316L 316L
1.1200 / 1.8159 / 1.7107 1.1200 / 1.8159 / 1.7107 1.4310
Standard
Carbon steel Carbon steel Stainless steel
54 Spring
1.4310 1.4310 –
Optional
Stainless steel Stainless steel –
1.4310 1.4310 1.4310
57 Pin
Stainless steel Stainless steel Stainless steel
Graphite / 1.4401 Graphite / 1.4401 Graphite / 1.4401
60 Gasket
Graphite / 316 Graphite / 316 Graphite / 316
1.3541 1.3541 1.4401
61 Ball
Hardened stainless steel Hardened stainless steel 316
Please notice:
– Modifications reserved by LESER.

– LESER can upgrade materials without notice.
LWN 481.01-E 07/03
– Every part can be replaced by other material acc. to customer specification.
Type 462
Dimensions and weights – Metric Units
Threaded connections
Size Outlet body 1" 1" 1" 1" 1" 1" 11/2" 11/2" 11/2" 11/2" 11/2"
Actual Orifice diameter d0 [mm] 9 9 9 13 13 13 17,5 17,5 17,5 17,5 17,5
Actual Orifice area A0 [mm2] 63,6 63,6 63,6 133 133 133 241 241 241 241 241
Weight Standard [kg] 2,6 2,6 2,6 2,6 2,6 2,6 3,0 3,0 3,0 3,0 3,0
Balanced bellows 3,4 3,4 3,4 3,4 3,4 3,4 3,8 3,8 3,8 3,8 3,8
Required installation diameter [mm] 165 165 165 165 165 165 165 165 165 165 165
Inlet thread “Female”
DIN ISO 228-1 G Inlet a 60,5 65,5 70 60,5 65,5 70,5 65,5 70,5 75,5 80,5 –
Center to face [mm] Outlet b 75 75 75 75 75 75 75 75 75 75 –
Height [mm] H max. 290,5 295,5 300,5 290,5 295,5 300,5 292,5 297,5 302,5 307,5 –
ISO 7-1/BS 21 Rc Inlet a 60,5 70,5 70,5 60,5 70,5 70,5 70,5 70,5 – – –
Center to face [mm] Outlet b 75 75 75 75 75 75 75 75 – – –
Height [mm] H max. 290,5 300,5 300,5 290,5 300,5 300,5 297,5 297,5 – – –
ANSI/ASME B1.20.1 NPT Inlet a 60,5 70,5 70,5 60,5 70,5 70,5 70,5 70,5 75,5 80,5 –
Center to face [mm] Outlet b 75 75 75 75 75 75 75 75 75 75 –
Height [mm] H max. 290,5 300,5 300,5 290,5 300,5 300,5 297,5 297,5 302,5 307,5 –
Inlet thread “Male”
DIN ISO 228-1 G Inlet a – 55,5 55,5 – 55,5 55,5 55,5 55,5 55,5 55,5 –
Center to face [mm] Outlet b – 75 75 – 75 75 75 75 75 75 –
ISO 7-1/BS 21 R Inlet a – 52,5 52,5 – 52,5 52,5 – 52,5 – 52,5 –
Center to face [mm] Outlet b – 75 75 – 75 75 – 75 – 75 –
ANSI/ASME B1.20.1 NPT Inlet a – 52,5 52,5 – 52,5 52,5 – 52,5 52,5 52,5 53
Center to face [mm] Outlet b – 75 75 – 75 75 – 75 75 75 75
Height inlet thread “Male”

Inlet thread Size 1/ 3/ 11/4" 11/2" 1/ 3/ 11/4" 11/2"
2" 4" 1" 2" 2" 4" 1" 2"
DIN ISO 228-1 [mm] G H max. – 301,5 303,5 302,5 304,5 – – 346,5 348,5 347,5 349,5 –
ISO 7-1/BS 21 [mm] R H max. – 302,5 305,5 – 307,5 – – 347,5 350,5 – 352,5 –
ASME B1.20.1 [mm] NPT H max. – 304,5 309,5 307,5 307,5 308 – 349,5 354,5 352,5 352,5 353
Length of screwed end “c” inlet thread “Male”

Inlet thread Size 1/ 3/ 11/4" 11/2"
2" 4" 1" 2"
DIN ISO 228-1 [mm] G 14 16 18 20 22 –
ISO 7-1/BS 21 [mm] R 19 20 23 – 28 –
ASME B1.20.1 [mm] NPT 22 22 27 28 28 28
Type 462
c c
Required installation diameter
Conventional design – Female thread Conventional design – Male thread Balanced bellows
07/08 LWN 481.01-E

Type 462
Dimensions and weights – Metric Units
Flanged connection
Actual Orifice diameter d0 [mm] 9 13 17,5 9 13 17,5
Actual Orifice area A0 [mm2] 63,6 133 241 63,6 133 241
DIN ISO 1092-1 (Available flange sizes refer to page 09/07)
Flange rating PN 40 – 400
Center to face [mm] Inlet a 100 100 105 100 100 105
Outlet b 100 100 100 100 100 100
Height [H4] [mm] H max. 330 330 333 375 375 378
ASME B 16.5 (Available flange sizes refer to page 09/07)
Flange rating class 150 – 2500
Center to face [mm] Inlet a 100 100 105 100 100 105
Outlet b 100 100 100 100 100 100
Height [H4] [mm] H max. 330 330 333 375 375 378
Weight
For the calculation of the total weight please use the Formular: WT = WN + WF (Inlet) + WF (Outlet)
Weight net [kg]
2,6 2,6 3 3,8 3,8 4,2
(without inlet and outlet flange) WN
Flange dimensions and availability

DIN ISO 1092-1 / Flange rating PN ASME B16.5 / Flange rating class
Size 40 160 250 320 400 Size 150 300 600 900 1500 2500
DN 15 NPS 1/2"
Flange thickness [mm] s 18 22 26 26 30 14 18 26 30,2
Weight slip on flange [kg] WF 0,8 1,2 2,5 2,5 3,6 0,6 0,9 2,1 3
Available at Inlet ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Available at Outlet ✓ ✓ ✓ ✓ ✓ ✓
DN 20 NPS 3/4"
Flange thickness [mm] s 20 22 15 18 25,4 32
Weight slip on flange [kg] WF 1,1 1,3 0,8 1,4 2,3 3,5
Available at Inlet ✓ ✓ ✓ ✓ ✓ ✓
Available at Outlet ✓ ✓ ✓ ✓ ✓
DN 25 NPS 1"
Flange thickness [mm] s 22 26 30 36 40 17 21,5 32,5 40
Weight slip on flange [kg] WF 1,3 2,6 3,5 5 7,5 1 2,1 4,1 5,1
Available at Inlet ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
DN 40 NPS 11/2"
Flange thickness [mm] s 23 23 34 22 24 38
Weight slip on flange [kg] WF 2,1 2,9 4,3 1,4 2,2 3,9
Available at Inlet ✓ ✓ ✓ ✓ ✓ ✓
Type 462
LWN 481.01-E 07/09

Type 462
Pressure temperature ratings – Metric Units
Metric Units
Actual Orifice Area A0 [mm2] 63,6 133 241
Body material: 1.4104 (430F) Type 4623
Base / Connection size 1/
2"
3/
4" 1" 1/
2"
3/ "
4 1" 3/
4" 1" 11/4" 11/2" 2"
Inlet Body Pressure rating PN 400 PN 250 PN 160
Outlet body Pressure rating PN 40 PN 40 PN 40
Minimum
p [barg] S/G/L 0,5 0,5 0,5
set pressure
Min. set pressure1)

p [barg] S/G/L 40 40 40
standard bellows
Min. set pressure

p [barg] S/G/L 3 3 3
low press. bellows
Maximum
p [barg] S/G/L 250 180 92,5
set pressure
Temperature min [°C ] -10
acc. to DIN EN max [°C ] +350
acc. to ASME max [°C ] +150
Body material: 1.4404 (316L) Type 4622
2"
3/
4" 1" 1/
2"
3/ "
4 1" 3/
4" 1" 11/4" 11/2" 2"
Inlet Body Pressure rating PN 250 PN 160 PN 160
Outlet Body Pressure rating PN 40 PN 40 PN 40
Minimum
p [barg] S/G/L 0,5 0,5 0,5
set pressure
Min. set pressure1)
p [barg] S/G/L 40 40 40
standard bellows
Min. set pressure p [barg] S/G/L 3 3 3

low press. bellows
Maximum
p [barg] S/G/L 250 180 92,5
set pressure
Body material: 1.4404 (316L) Type 4624
2"
3/
4" 1" 1/
2"
3/ "
4 1" 3/
4" 1" 11/4" 11/2" 2"
Inlet Body
Type 462
Pressure rating PN 250 PN 160 PN 160

Outlet Body Pressure rating PN 40 PN 40 PN 40
Minimum
p [barg] S/G/L 0,5 0,5 0,5
set pressure
Min. set pressure1) p [barg] S/G/L 40 40 40
standard bellows
Min. set pressure1) p [barg] S/G/L 3 3 3

standard bellows
Maximum
p [barg] S/G/L 250 180 92,5
set pressure
1)Min. set pressure standard bellows = Max. pressure low pressure bellows.
The temperature is limited by soft seal material. The stated values are valid for EPDM.
07/12 LWN 481.01-E

Type 462
Approvals
Approvals
Actual Orifice area A0 [mm2] 63,6 133 241
Europe Coefficient of discharge Kdr
DIN EN ISO 4126-1 Approval No. 072020111Z0008/0/14
S/G 0,83 0,81 0,79
L 0,61 0,61 0,52
Germany Coefficient of discharge αw
AD 2000-Merkblatt A2 Approval No. TÜV SV 909
S/G 0,83 0,81 0,79
L 0,61 0,61 0,52
United States Coefficient of discharge K
ASME Sec. VIII Approval No. M 37112
S/G 0,811
Approval No. M 37101
L 0,566
Canada Coefficient of discharge K
CRN Approval No. OG0730.96
S/G Refer to ASME Sec. VIII
L Refer to ASME Sec. VIII
China Coefficient of discharge αw
CSBQTS Approval No.
S/G 0,83 0,81 0,79
L 0,61 0,61 0,52
Russia Coefficient of discharge αw
GGTN/ Approval No. PPC 00-18458
GOSGOTECHNADZOR S/G 0,83 0,81 0,79
GOST R L 0,61 0,61 0,52
Classification societies Homepage
Bureau Veritas BV www.bureauveritas.com
Det Norske Veritas DNV www.dnv.com The valid certification number is changed with every reneval.
Germanischer Lloyd GL www.gl-group.com
A sample certificate including the valid certification number can be taken
Lloyd‘ s Register EMEA LREMEA www.lr.org
Type 462
from the homepage of the classification societies.

Registro Italiano Navale RINA www.rina.org
LWN 481.01-E 07/17

Type 462
Capacities – Metric Units
Capacities according to AD 2000-Merkblatt A2, based on set-pressure plus 10% overpressure.
Capacities at 1 bar (14,5 psig) and below are based on 0,1 bar (1,45 psig) overpressure.
Metric Units AD 2000-Merkblatt A2

Actual Orifice area A0 [mm2] 63,6 133,0 241,0
LEO*) [inch2] S/G = 0,082 L = 0,086 S/G = 0,171 L = 0,179 S/G = 0,310 L = 0,325
Set pressure Capacities Capacities Capacities
Steam Air Water Steam Air Water Steam Air Water
saturated 0°C and 20°C saturated 0°C and 20°C saturated 0°C and 20°C
1013 mbar 1013 mbar 1013 mbar
[bar] [kg/h] [mn3/h] [103kg/h] [kg/h] [mn3/h] [103kg/h] [kg/h] [mn3/h] [103kg/h]
0,5 40 47 1,53 87 102 3,19 134 157 4,93
1 58 69 2,07 125 149 4,32 200 238 6,67
2 93 113 2,93 195 235 6,11 331 400 9,44
3 127 155 3,59 258 316 7,48 456 558 11,6
4 158 195 4,14 322 396 8,64 569 700 13,3
5 189 234 4,63 386 477 9,66 681 842 14,9
6 220 274 5,07 449 557 10,6 793 985 16,3
7 251 313 5,48 511 638 11,4 902 1127 17,7
8 282 353 5,86 573 718 12,2 1013 1269 18,9
9 312 392 6,21 636 799 13 1124 1412 20
10 343 432 6,55 699 879 13,7 1235 1554 21,1
12 405 511 7,17 824 1040 15 1457 1839 23,1
14 465 590 7,75 947 1201 16,2 1674 2123 25
16 527 669 8,28 1072 1363 17,3 1895 2408 26,7
18 588 748 8,78 1197 1524 18,3 2116 2693 28,3
20 650 827 9,26 1323 1685 19,3 2338 2977 29,8
22 709 906 9,71 1444 1846 20,3 2553 3262 31,3
24 771 986 10,1 1570 2007 21,2 2775 3547 32,7
26 833 1065 10,6 1696 2168 22 2997 3831 34
28 895 1144 11 1822 2329 22,9 3221 4116 35,3
30 957 1223 11,3 1949 2490 23,7 3445 4401 36,5
32 1020 1302 11,7 2076 2651 24,4 3669 4685 37,7
34 1079 1381 12,1 2198 2812 25,2 3884 4970 38,9
36 1142 1460 12,4 2325 2973 25,9 4110 5255 40
38 1205 1539 12,8 2453 3134 26,6 4336 5539 41,1
40 1268 1618 13,1 2582 3295 27,3 4564 5824 42,2
42 1332 1698 13,4 2711 3456 28 4792 6109 43,2
44 1395 1777 13,7 2841 3617 28,7 5021 6393 44,3
46 1459 1856 14 2971 3779 29,3 5251 6678 45,3
48 1524 1935 14,3 3102 3940 29,9 5483 6963 46,2
50 1588 2014 14,6 3234 4101 30,5 5715 7247 47,2
60 1910 2409 16 3889 4906 33,5 6874 8671 51,7
70 2245 2805 17,3 4571 5711 36,1 8079 10094 55,8
80 2583 3201 18,5 5259 6517 38,6 9294 11518 59,7
90 2938 3596 19,6 5982 7322 41 10572 12941 63,3
100 3296 3992 20,7 6711 8127 43,2 11862 14364 66,7
120 4077 4783 22,7 8302 9738 47,3
140 4958 5574 24,5 10096 11349 51,1
160 5977 6365 26,2 12171 12959 54,6
180 7262 7156 27,8 14786 14570 57,9
200 8989 7947 29,3
220 9426 8738 30,7
Type 462
240 9843 9529 32,1

250 10046 9924 32,7
*) LEOS/G/L = LESER Effective Orifice steam / gas / liquids please refer to page 00/11
How to use capacity-sheets refer to page 00/09
07/18 LWN 481.01-E

Type 462
Capacities – US Units
Capacities according to ASME Section VIII (UV), based on set-pressure plus 10% overpressure.
Capacities at 30 psig (2,07 bar) and below are based on 3 psig (0,207 bar) overpressure.
US Units ASME Section VIII

LEO*) [inch2] S/G = 0,082 L = 0,086 S/G = 0,171 L = 0,179 S/G = 0,310 L = 0,325
Set pressure Capacities Capacities Capacities
Steam Air Water Steam Air Water Steam Air Water
saturated 60° F and 70°F saturated 60° F and 70°F saturated 60° F and 70°F
14,5 psig 14,5 psig 14,5 psig
[psig] [lb/h] [S.C.F.M.] [US-G.P.M.] [lb/h] [S.C.F.M.] [US-G.P.M.] [lb/h] [S.C.F.M.] [US-G.P.M.]
5 93 33 6,01 195 69 12,5 353 126 22,7
10 114 41 7,67 238 85 16 431 153 28,9
20 155 55 10,2 324 115 21,2 586 209 38,4
30 196 70 12,2 410 146 25,4 742 264 46
40 242 86 14,1 504 180 29,3 913 326 53,1
50 287 103 15,8 599 213 32,8 1085 387 59,4
60 332 119 17,3 693 247 35,9 1256 448 65,1
70 377 135 18,7 788 281 38,8 1427 509 70,3
80 423 151 19,9 882 315 41,5 1599 570 75,1
90 468 167 21,2 977 348 44 1770 631 79,7
100 513 184 22,3 1071 382 46,4 1941 692 84
120 604 216 24,4 1260 449 50,8 2284 814 92
140 695 248 26,4 1449 517 54,9 2626 936 99,4
160 785 281 28,2 1638 584 58,7 2969 1058 106
180 876 313 29,9 1827 652 62,3 3311 1180 113
200 966 346 31,5 2016 719 65,6 3654 1302 119
220 1057 378 33,1 2205 787 68,8 3996 1424 125
240 1148 410 34,5 2394 854 71,9 4339 1546 130
260 1238 443 36 2584 921 74,8 4682 1669 135
280 1329 475 37,3 2773 989 77,6 5024 1791 141
300 1419 508 38,6 2962 1056 80,4 5367 1913 146
320 1510 540 39,9 3151 1124 83 5709 2035 150
340 1601 572 41,1 3340 1191 85,6 6052 2157 155
360 1691 605 42,3 3529 1259 88 6394 2279 159
380 1782 637 43,5 3718 1326 90,5 6737 2401 164
400 1872 670 44,6 3907 1393 92,8 7080 2523 168
420 1963 702 45,7 4096 1461 95,1 7422 2645 172
440 2054 734 46,8 4285 1528 97,3 7765 2767 176
460 2144 767 47,8 4474 1596 99,5 8107 2889 180
480 2235 799 48,9 4663 1663 102 8450 3011 184
500 2326 832 49,9 4852 1731 104 8792 3134 188
550 2552 913 52,3 5325 1899 109 9649 3439 197
600 2779 994 54,6 5797 2068 114 10505 3744 206
650 3005 1075 56,9 6270 2236 118 11362 4049 214
700 3232 1156 59 6742 2405 123 12218 4354 222
750 3458 1237 61,1 7215 2573 127 13075 4660 230
800 3685 1318 63,1 7688 2742 131 13931 4965 238
850 3911 1399 65 8160 2911 135 14787 5270 245
900 4138 1480 66,9 8633 3079 139 15644 5575 252
950 4364 1561 68,7 9105 3248 143 16500 5881 259
1000 4591 1642 70,5 9578 3416 147 17357 6186 266
1100 5044 1804 74 10523 3753 154 19070 6796 279
Type 462
1200 5497 1966 77,2 11469 4091 161 20782 7407 291
1300 5950 2128 80,4 12414 4428 167 22495 8017 303
1400 6394 2290 83,4 13340 4765 174 24174 8628 314
1500 6889 2452 86,4 14373 5102 180
1600 7393 2614 89,2 15424 5439 186
1700 7907 2776 91,9 16497 5776 191
1800 8433 2938 94,6 17594 6113 197
1900 8971 3100 97,2 18718 6451 202
2000 9525 3262 99,7 19872 6788 208
2200 10684 3586 105 22292 7462 218
2400 11935 3910 109 24901 8136 227
2600 13310 4234 114 27770 8811 237
2800 14864 4558 118 31012 9485 246
3000 13651 4882 122
3200 14557 5206 126
3400 15463 5530 130
3600 16369 5854 134
3800 17276 6178 137
*) LEOS/G/L = LESER Effective Orifice steam / gas / liquids please refer to page 00/11
LWN 481.01-E 07/19

Type 462
Available Options
Male thread Female thread Flanged version
Soft seal o-ring disc

J30: NBR “N”
J21: CR “K”
J22: EPDM “D”
J23: FKM “L”
J20: FFKM “C”
Heating jacket Balanced bellows Special material

H29 2.4610 Hastelloy® C4
2.4360 Monel® 400
1.4462 Duplex
Code
YYYY
Code Code
XXXX ZZZZ
Lift indicator Test gag O-ring-damper H2 O-ring-damper H4

Type 462
J93: Lift indicator J69: H4 J65 J66

J70: H2
07/16 LWN 481.01-E

Accessories and Options
Overview
Options
Type 459 459 HDD 462 462 HDD
Base / Inlet body
Male thread ✓ ✓ ✓ ✓
Female thread ✓ ✓ ✓ ✓
Flanged version – DIN ISO 1092-1
Size DN 15 ✓ ✓ ✓ ✓
Inlet Flange rating PN 40 – 400
Outlet –
Size DN 20 ✓ ✓ ✓ ✓
Inlet Flange rating PN 40 + PN 160
Outlet –
Size DN 25 ✓ ✓ ✓ ✓
Inlet Flange rating PN 40 – 400
Outlet Flange rating PN 40 – PN 400
Size DN 40 ✓ ✓ ✓ ✓
Inlet –
Outlet Flange rating PN 40 – 400
Flanged version – ASME B16.5
Size NPS 1/2" ✓ ✓ ✓ ✓
Inlet Flange rating class 150 – 2500
Outlet –
Size NPS 3/4" ✓ ✓ ✓ ✓
Outlet –
Size NPS 1" ✓ ✓ ✓ ✓
Outlet Flange rating class 150 – 900
Size NPS 1 1/2" ✓ ✓ ✓ ✓
Outlet Flange rating class 150 – 900
Disc
Disc stellited L25 ✓ * – –
Type of sealing
Metal seat Metal to metal ✓ ✓ – –
Metal to metal stellited ✓ * ✓ *
Plastic seat Sealing plate ✓ ✓ – –
Soft seal O-ring – – ✓ ✓
Options
09/02 LWN 481.01-E

Overview
Options
Type 459 459 HDD 462 462 HDD
Caps and levers
H2 ✓ ✓ ✓ ✓
H3 ✓ – ✓ –
H4 ✓ ✓ ✓ ✓
Heating jacket
Outlet body ✓ ✓ ✓ ✓
Bonnet spacer ✓ ✓ ✓ ✓
Test gag
H2 ✓ ✓ ✓ ✓
H4 – – – –
Bellows
Stainless steel ✓ ✓ ✓ ✓
low pressure ✓ ✓ ✓ ✓
Hasteloy or spec. mat. ✓ ✓ ✓ ✓
High temp. equipment – ✓ – ✓
Elastomer ✓ – ✓ –
Lift indicator
Lifting device H4 ✓ ✓ ✓ ✓
Lift stopper
Bush ✓ ✓ except d0 6 mm ✓ ✓
Gag ✓ ✓ ✓ ✓
O-ring damper
H2 ✓ – ✓ –
H4 ✓ – ✓ –
Options
LWN 481.01-E 09/03

Caps and levers – Subassembly item 40
Cap H2 Packed lever H4 1
12
14
13
1.5
2
1.6
24
3a
25 23
24
23 1.8
1.7
1.10
1.11
1.9
1.4
Plain lever H3 Test gag

Cap H2: J70
12
Packed lever H4: J69
14
6
93 93.5
13
3b
1
22
23 BLOCKED
Remove
after testing
24
10
Test gag
The test gag blockades the spindle and keeps the safety valve tight while the system pressure exceeds the set pressure.
The test gag is used for:

- to perform pressure tests in a system without dismantling of the safety valve
- the individual adjustment of safety valves installed in the same system
After testing the test gag must be removed because otherwise the safety valve cannot protect the system
Options
against unallowable overpressure!
09/04 LWN 481.01-E

Available connections
For dimensions and weights refer to:
Type 459 – page 05/08 + 05/10
Type 459 HDD – page 06/08 + 06/10
Type 462 – page 07/08 + 07/10
Type 462 HDD – page 08/08 + 08/10
Threaded connections Male thread Female thread

Actual Orifice diameter d0 [mm] 6 9 / 13 17,5
Actual Orifice area A0 [mm2] 28,3 63,9 / 133 241
Actual Orifice diameter d0 [inch] 0,236 0,345 / 0,512 0,689
Actual Orifice area A0 [inch2] 0,044 0,099 / 0,206 0,374
Valve size Inlet Outlet Inlet Outlet Inlet Outlet
Male thread DIN ISO 228-1
1/
2" V54 – – – – –
3/ " V55 – V55 – – –
4
G 1" V56 V68 V56 V68 V65 –
11/4" – V79 – V79 V83 V79
11/2" – V69 – V69 V57 V69
Female thread DIN ISO 228-1
1/
2" V50 – V50 – – –
3/ " V51 – V51 – V51 –
4
G 1" V52 V66 V52 V66 V52 –
11/4" – V81 – V81 V84 V81
11/2" – V67 – V67 V53 V67
Male thread DIN ISO 7-1/BS 21
1/
2" V30 – – – – –
3/ " V31 – V31 – – –
4
R/BSPT
1" V32 V42 V32 V42 V32 –
11/2" – V43 – V43 V33 V43
Female thread DIN ISO 7-1/BS 21
1/
2" V38 – V38 – – –
3/ " V39 – V39 – V39 –
4
Rc/BSPT
1" V40 V36 V40 V36 V40 –
11/2" – V37 – V37 V41 V37
Male thread ANSI/ASME B1.20.1
1/
2" V61 – – – – –
3/ " V62 – V62 – – –
4
1" V63 V73 V63 V73 V63 –
NPT
11/4" – V82 – V82 V85 V82
11/2" – V74 – V74 V64 V74
2" – – – – V86 –
Female thread ANSI/ASME B1.20.1
1/ " V58 – V58 – – –
2
3/ " V59 – V59 – V59 –
4
1" V60 V71 V60 V71 V60 –
NPT
11/4" – V80 – V80 V87 V80
11/ 2" – V72 – V72 V75 V72
2" – – – – – V88
Flanged and threaded connections can be combined.
Threads according to other standards are available.
Please specify in writing (diameter, pressure rating, standard).
Options
09/06 LWN 481.01-E

Available connections
For dimensions and weights refer to:
Type 459 – page 05/09 + 05/11
Type 459 HDD – page 06/09 + 06/11
Type 462 – page 07/09 + 07/11
Type 462 HDD – page 08/09 + 08/11
Flanged connections Flanged version

Actual Orifice diameter d0 [mm] 6 9 / 13 17,5
Actual Orifice area A0 [mm2] 28,3 63,9 / 133 241
Actual Orifice diameter d0 [inch] 0,236 0,345 / 0,512 0,689
Actual Orifice area A0 [inch2] 0,044 0,099 / 0,206 0,374
DIN ISO 1092-1 (PN > 100: DIN 2501)
PN Inlet Outlet Inlet Outlet Inlet Outlet
40 I21 – I21 – – –
160 I22 – I22 – – –
DN 15 250 I23 – I23 – – –
320 I24 – I24 – – –
400 I25 – I25 – – –
40 I26 – I26 – I26 –
160 I27 – I27 – I27 –
DN 20 250 – – – – – –
320 – – – – – –
400 – – – – – –
40 I31 I46 I31 I46 I31 –
160 I32 I47 I32 I47 I32 –
DN 25 250 I33 I48 I33 I48 I33 –
320 I34 – I34 – I34 –
400 I35 – I35 – I35 –
40 – – – I49 – I49
DN 40 320 – – – I50 – I50
400 – – – I51 – I51
ANSI/ASME B 16.5
Class Inlet Outlet Inlet Outlet Inlet Outlet
150 V01 – V01 – – –
300 V02 – V02 – – –
600 V02 – V02 – – –
NPS 1/2"
900 V03 – V03 – – –
1500 V03 – V03 – – –
2500 V04 – V04 – – –
150 V05 – V05 – V05 –
300 V06 – V06 – V06 –
600 V06 – V06 – V06 –
NPS 3/4"
900 V07 – V07 – V07 –
1500 V07 – V07 – V07 –
2500 V08 – V08 – V08 –
150 V09 V18 V09 V18 V09 –
300 V10 V19 V10 V19 V09 –
600 V10 V19 V10 V19 V10 –
NPS 1"
900 V11 V20 V11 V20 V10 –
1500 V11 – V11 – V11 –
2500 V12 – V12 – V12 –
150 – – – V21 – V21
300 – – – V22 – V22
NPS 1 1/2"
600 – – – V22 – V22
Options
900 – – – V23 – V23

Flanged and threaded connections can be combined. Threads according to other standards are available. Please specify in writing (diameter, pressure rating, standard).
LWN 481.01-E 09/07

Sealing surface
Types 459 and 462 – Soft seal

LESER soft seal solutions allow for superior tightness.
Features and bennefits
– two different designs for a wide variety application

– large selection of soft seal materials to best adapt to the application
– increased service life of sealing surfaces compared to a metal to metal seat
– simple replacement of the soft seal reduces maintenance costs
– standard ARP O-ring sizes for easy worldwide procurement
– one standard durometer per O-ring material for all set pressures to reduce stocking expenses
Soft seal solutions Series 459

Type 459, 459 HDD Type 462, 462 HDD
Disc with inserted sealing plate, optional O-ring disc
Design
7.2
7.2
7.5
7.5
7.1
7.1
7.3
7.4
increased tightness at temperatures superior tightness maintained tightness

Requirements close to the set pressure
lower than - 20°C / - 4°F Pressure range: 5 – 180 bar, 75 – 2600 psig
Example application Liquefied gases Gas storage tanks
Subassembly of the disc (item 7), bill of materials
Component
Item 7.1 1.4404 Item 7.1 1.4404
Disc
SA 479 316L SA 479 316L
Soft seal Item 7.3 sealing plate Item 7.4 O-ring
Materials refer to next page
Item 7.2 1.4404 Item 7.2 1.4404
Lifting aid
316L 316L
Item 7.5 1.4571 – –
Retaining clip
316Ti – –
– – Item 7.5 1.4310
Pin
– – Stainless steel
Options
For temperature limits and medium resistance please refer to the soft seal material selection, page 09/10.
LWN 481.01-E 09/09

Soft seal material selection
Type 459 /459 HDD – Sealing plate
Material selection Option code

Option Code letter1) Application2)
Set pressure p code
J44 PTFE-FDA “A” Nearly all chemicals
[barg] [psig]
Cryogenic and refrigeration
350 5076 applications, flammable
J49 J48
Vespel PCTFE “G” media applications (e.g.
300 4351
SP-1 gaseous oxygen) up to 50 bar,
725 psig at 60°C, 140°F
250 3626
J48
PCTFE High temperature and
200 2900
Kel-F high pressure applications
150 2175 J49 VESPEL-SP1 “A” (no steam), for chemical
J44 resistance see
PTFE-FDA 100 1450 www.DuPont.com
[°F] Teflon
50 725 Other For other materials contact:
-508 -418 -328 -238 -148 -58 122 212 302 392 482 572
then “X” your local representative or
listed sales@leser.com
-300 -250 -200 -150 -100 -50 0 50 100 150 200 250 300
[°C] Temperature t
Standard material of LESER balanced bellows is stainless steel 1.4571 / 316Ti.
Type 462 /462 HDD – O-ring disc
Soft seal materials Selection Option code

Option Code letter1) Application2)
code
J30
-25°C/ 110°C/
Nitrile/Butatiene Hydraulic oil, vegetable and
-13°F NBR – “N” 230°F J30 NBR “N”
animal grease and oil
Parafin oil, silicone oil and
grease, water and water
J21 J21 CR “K”
-40°C/
Neoprene
100°C/ based solvents, refrigerants,
-40°F CR – “K” 212°F ozone
Hot water and superheated
steam up to 150 °C, 302 °F,
J22 J22 EPDM “D” some organic and inorganic
-45°C/ Ethylene/Propylene 150°C/
-49°F 302°F acids, silicone oil and grease,
EPDM – “D”
FDA compliant
High temperature service
-20°C/
J23
180°C/ (no superheated steam),
Viton mineral oil and grease, silicone
-4°F 356°F
FKM – “L”
J23 FKM “L” oil and grease, vegetable and
animal grease and oil, ozone,
FDA compliant compound
J20
0°C/ Kalrez
250°C/ available on request
32°F 482°F
FFKM – “C”
Nearly all chemicals,
[°F]
standard O-ring compound
-58 -40 -22 -4 14 32 77 122 167 212 257 302 347 392 437 482
for Type 438 is Kalrez® 6375
J20 FFKM “C”
with steam resistance,
FDA compliant compound
-50 -40 -30 -20 -10 0 25 50 75 100 125 150 175 200 225 250
available on request
[°C] Temperature t
Other For other materials contact:
1) The code letters will be stamped on the disc (Item 7). then “X” your local representative or
Options
2) Pressure and temperature service must be considered in any case. listed sales@leser.com
Chemical resistance information is supplied by the O-ring manufacturer.
09/10 LWN 480.01-E

Type
Type 526
Type 526
Packed lever H4
Closed bonnet
Conventional design 526
Flanged Safety Relief Valves
– spring loaded
Contents Chapter/Page
Materials
• Conventional design 01/02
• Balanced bellows design 01/04
How to order
• Numbering system 01/06
• Article numbers 01/08
Dimensions
• US Units 01/12
Weights
• US Units 01/15
Orifice [ D – T ]
• Selection charts /
Article numbers, dimensions and weights 01/16
• Pressure temperature ratings
[Metric Units + US Units] 01/18
Flange drillings 01/72
Flange facings 01/73
Outlet with flange rating class 300 01/74
Spare parts 01/76
Available options 01/84
Approvals 01/85
Capacities
• Steam [Metric Units + US Units] 01/86
• Air [Metric Units + US Units] 01/88
• Water [Metric Units + US Units] 01/90
LWN 480.01-E 01/01

Type 526
Article numbers – Overview
Type 526
Article numbers
Material WCB CF8M WC6 LCB WCB CF8M WC6 LCB WCB CF8M WC6 LCB
1.0619 1.4408 1.7357 1.0619 1.4408 1.7357 1.0619 1.4408 1.7357
Flange class 150 x 150 300L x 150 300 x 150
Valve size 1D2 1D2 1D2
5262. 5264. – 5263. Use 1 D 2 5262. 5264. 5267. 5263.
D 001¤ 010¤ 500¤ 300 x 150 002¤ 011¤ 006¤ 501¤
1E2 1E2 1E2

E 5262. 5264. – 5263. Use 1 E 2 5262. 5264. 5267. 5263.
015¤ 024¤ 505¤ 300 x 150 016¤ 025¤ 020¤ 506¤
1 1 /2 F 2 1 1/2 F 2 1 1 /2 F 2
F 5262. 5264. – 5263. 5262. 5264. – 5263. 5262. 5264. 5267. 5263.
029¤ 039¤ 510¤ 030¤ 040¤ 511¤ 031¤ 041¤ 035¤ 512¤
1 1 /2 G 3 1 1/2 G 3 1 1 /2 G 3
G 5262. 5264. – 5263. 5262. 5264. – 5263. 5262. 5264. 5267. 5263.
045¤ 110¤ 516¤ 046¤ 111¤ 517¤ 047¤ 112¤ 052¤ 518¤
Valve size 1 1 /2 H 3 1 1/2 H 3 2H3
5262. 5264. – 5263. 5262. 5264. – 5263. 5262. 5264. 5267. 5263.
H 142¤ 152¤ 523¤ 143¤ 153¤ 524¤ 144¤ 154¤ 148¤ 525¤
2J3 2J3 3J4

J 5262. 5264. – 5263. 5262. 5264. – 5263. 5262. 5264. 5267. 5263.
162¤ 196¤ 529¤ 163¤ 197¤ 530¤ 164¤ 198¤ 168¤ 531¤
3K4 3K4 3K4

K 5262. 5264. – 5263. Use 3 K 4 5262. 5264. 5267. 5263.
202¤ 211¤ 535¤ 300 x 150 203¤ 212¤ 207¤ 536¤
Valve size 3L4 3L4 4L6
5262. 5264. – 5263. 5262. 5264. – 5263. 5262. 5264. 5267. 5263.
L 232¤ 242¤ 540¤ 233¤ 243¤ 541¤ 234¤ 244¤ 238¤ 542¤
4M6 4M6 4M6

M 5262. 5264. – 5263. Use 4 M 6 5262. 5264. 5267. 5263.
580¤ 587¤ 546¤ 300 x 150 581¤ 588¤ 584¤ 547¤
4N6 4N6 4N6

N 5262. 5264. – 5263. Use 4 N 6 5262. 5264. 5267. 5263.
590¤ 597¤ 550¤ 300 x 150 591¤ 598¤ 594¤ 551¤
4P6 4P6 4P6

P 5262. 5264. – 5263. 5262. 5264. – 5263. 5262. 5264. 5267. 5263.
645¤ 653¤ 554¤ 646¤ 654¤ 555¤ 647¤ 655¤ 650¤ 556¤
6Q8 6Q8 6Q8

Q 5262. 5264. – 5263. Use 6 Q 8 5262. 5264. 5267. 5263.
657¤ 662¤ 559¤ 300 x 150 658¤ 663¤ 660¤ 560¤
6R8 6R8 6 R 10
R 5262. 5264. – 5263. 5262. 5264. 5267. 5263. 5262. 5264. – 5263.
665¤ 671¤ 562¤ 666¤ 672¤ 669¤ 563¤ 667¤ 673¤ 564¤
8 T 10 8 T 10 8 T 10
T 5262. 5264. – 5263. Use 8 T 10 5262. 5264. 5267. 5263.
675¤ 678¤ 566¤ 300 x 150 676¤ 679¤ 677¤ 567¤
01/08 LWN 480.01-E

Type 526
Article numbers – Overview
Type 526
Article numbers
Material WCB CF8M WC6 LCB WCB CF8M WC6 LCB WCB CF8M WC6 LCB WCB CF8M WC6 LCB
1.0619 1.4408 1.7357 1.0619 1.4408 1.7357 1.0619 1.4408 1.7357 1.0619 1.4408 1.7357
Flange class 600 x 150 900 x 300 1500 x 300 2500 x 300
Valve size 1D2 1 1 /2 D 2 1 1 /2 D 2 1 1/2 D 3
5262. 5264. 5267. 5263. Use 1 1/2 D 2 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263.
D 003¤ 012¤ 007¤ 502¤ 1500 x 300 004¤ 013¤ 008¤ 503¤ 005¤ 014¤ 009¤ 504¤
1E2 1 1/2 E 2 1 1/2 E 2 1 1/2 E 3

E 5262. 5264. 5267. 5263. 1/
Use 1 2 E 2 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263.
017¤ 026¤ 021¤ 507¤ 1500 x 300 018¤ 027¤ 022¤ 508¤ 019¤ 028¤ 023¤ 509¤
1 1/2 F 2 1 1 /2 F 3 1 1/2 F 3 1 1/2 F 3

F 5262. 5264. 5267. 5263. Use 1 1/2 F 3 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263.
032¤ 042¤ 036¤ 513¤ 1500 x 300 033¤ 043¤ 037¤ 514¤ 034¤ 044¤ 038¤ 515¤
1 1/2 G 3 1 1 /2 G 3 2G3 2G3

G 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263.
048¤ 113¤ 053¤ 519¤ 049¤ 114¤ 054¤ 520¤ 050¤ 115¤ 055¤ 521¤ 051¤ 116¤ 056¤ 522¤
Flange class 600 x 150 900 x 150 1500 x 300
Valve size 2H3 2H3 2H3
5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263.
H 145¤ 155¤ 149¤ 526¤ 146¤ 156¤ 150¤ 527¤ 147¤ 157¤ 151¤ 528¤
3J4 3J4 3J4

J 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263.
165¤ 199¤ 169¤ 532¤ 166¤ 200¤ 170¤ 533¤ 167¤ 201¤ 171¤ 534¤
3K4 3K6 3K6

K 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263.
204¤ 213¤ 208¤ 537¤ 205¤ 214¤ 209¤ 538¤ 206¤ 215¤ 210¤ 539¤
Flange class 600 x 150 900 x 150 1500 x 150
5262. 5264. 5267. 5263. 5262. 5264. 5267. 5263. 5262. – 5267. 5263.
L 235¤ 245¤ 239¤ 543¤ 236¤ 246¤ 240¤ 544¤ 237¤ 241¤ 545¤
4M6 4M6
M 5262. 5264. 5267. 5263. 5262. – 5267. 5263.
582¤ 589¤ 585¤ 548¤ 583¤ 586¤ 549¤
4N6 4N6
N 5262. 5264. 5267. 5263. 5262. – 5267. 5263.
592¤ 599¤ 595¤ 552¤ 593¤ 596¤ 553¤
4P6 4P6
P 5262. 5264. 5267. 5263. 5262. – 5267. 5263.
648¤ 656¤ 651¤ 557¤ 649¤ 652¤ 558¤
6Q8
Q 5262. 5264. 5267. 5263.
659¤ 664¤ 661¤ 561¤
6 R 10 ¤) Please add code for the required cap or lifting device.

R 5262. 5264. 5267. 5263.
668¤ 674¤ 670¤ 565¤ Code for lifting device H2 H3 H4 H3
Bonnet closed closed closed open
8 T 10
T – – – – WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/09

Type 526
Conventional design
Type 526
40 Cap H2
19 Lock nut
18 Adjusting screw
69 Needle bearing
16 Spring plate
54 Spring
12 Spindle
9 Bonnet
14 Split ring
17 Spring plate
55 Stud
56 Nut
8 Guide
Plug 64
60 Gasket
22 Lift stopper
57 Ball
66 Screw
61 Ball
73 Lock screw
7 Disc
6 Adjusting ring
1 Body
5 Nozzle
01/02 LWN 480.01-E

Type 526
Conventional design
Type 526
Materials
Standard Service Type 5262 Corrosive Service Type 5264 Type 5267 Type 5263
Item Component
Trim: Standard Trim: Standard Trim: Standard Trim: Standard
1.0619 1.4408 1.7357

1 Body
SA 216 WCB SA 315 CF8M SA 217 WC6 SA 352 LCB
1.4404 1.4404 1.4404 stellited 1.4404
5 Nozzle1)
316 L 316L 316L stellited 316L
1.4408 1.4408 1.4404 1.4408
6 Adjusting ring
CF8M CF8M 316L CF8M
1.4122 1.4404 stellited 1.4122 1.4122
7 Disc
Hardened stainless steel 316L stellited Hardened stainless steel Hardened stainless steel
1.4404 1.4404 1.4404 1.4404
8 Guide
316 L 316L 316L 316L
1.0619 1.4404, 1.4571 1.7357
9 Bonnet
SA 216 WCB SA 479 316L, 316Ti SA 217 WC6 SA 352 LCB
1.4021 1.4021 1.4021 1.4021
12 Spindle
420 420 420 420
1.4104 1.4404 1.4104 1.4104
14 Split ring
Chrome steel 316L Chrome steel Chrome steel
1.0718 1.4404 1.0718 1.0718
16 / 17 Spring plate
Steel 316L Steel Steel
1.4104 1.4404 tenifer 1.4104 1.4104
Adjusting screw
Chrome steel 316L tenifer Chrome steel Chrome steel
18
PTFE with 15% Glas PTFE 15% Glas PTFE 15% Glas PTFE 15% Glas
with bushing
–"– –"– –"– –"–
1.0718 1.4404 1.0718 1.0718
19 Lock nut
1.4404 1.4404 1.4404 1.4404
22 Lift stopper
316L 316L 316L 316L
1.0718 1.4404 1.0718 1.0718
40 Cap H2
1.8159 1.4310 1.8159 1.8159
54 Spring
High temp. alloy steel Stainless steel High temp. alloy steel High temp. alloy steel
1.4401 1.4401 1.4401 1.4401
55 Stud
B8M B8M B8M B8M
1.4401 1.4401 1.4401 1.4401
56 Nut
8M 8M 8M 8M
1.4401 1.4401 1.4401 1.4401
57 Ball
316 316 316 316
Graphite / 1.4401 Graphite / 1.4401 Graphite / 1.4401 Graphite / 1.4401
60 Gasket
Graphite / 316 Graphite / 316 Graphite / 316 Graphite / 316
1.3541 1.4401 1.3541 1.3541
61 Ball
Hardened stainless steel 316 Hardened stainless steel Hardened stainless steel
Steel 1.4401 Steel Steel
64 Plug
–"– B8M –"– –"–
1.4401 1.4401 1.4401 1.4401
66 Screw
B8M B8M B8M B8M
1.4404 1.4404 1.4404 1.4404
69 Needle bearing
316L 316 L 316L 316L
1.4404 1.4404 1.4404 1.4404
73 Lock screw
8M 8M 8M 8M
1) Stellited sealing surfaces please refer to page 99/06
Please notice: Special materials:

- Modifications reserved by LESER Body and trim available in various materials (Monel®, Hastelloy® ...).
- LESER can upgrade materials without notice For nozzle and disc machined from the bar a short lead time is possible.
- Every part can be replaced by other material acc. to customer specification.
LWN 480.01-E 01/03

Type 526
Balanced bellows design
Type 526
40 Cap H2
19 Lock nut
18 Adjusting screw
69 Needle bearing
16 Spring plate
54 Spring
12 Spindle
9 Bonnet
14 Split ring
17 Spring plate
55 Stud
56 Nut
8 Guide
60 Gasket
11 Bonnet spacer
15 Bellows
57 Ball
66 Screw
61 Ball
7 Disc
73 Lock screw
6 Adjusting ring
1 Body
5 Nozzle
01/04 LWN 480.01-E

Type 526
Materials
Standard Service Type 5262 Corrosive Service Type 5264 Type 5267 Type 5263
Type 526
Item Component
Trim: Standard Trim: Standard Trim: Standard Trim: Standard
1.0619 1.4408 1.7357

1 Body
SA 216 WCB SA 315 CF8M SA 217 WC6 SA 352 LCB
1.4404 1.4404 1.4404 stellited 1.4404
5 Nozzle2)
316 L 316L 316L stellited 316L
1.4408 1.4408 1.4404 1.4408
6 Adjusting ring
CF8M CF8M 316L CF8M
1.4122 1.4404 stellited 1.4122 1.4122
7 Disc
Hardened stainless steel 316L stellited Hardened stainless steel Hardened stainless steel
1.4404 1.4404 1.4404 1.4404
8 Guide
316 L 316L 316L 316L
1.0619 1.4404, 1.4571 1.7357
Bonnet
SA 216 WCB SA 479 316L, 316Ti SA 217 WC6 SA 352 LCB
9
Valve size 1.0305 1.4571 1.0305 1.0305
6 R 10, 8T10 Steel SA 479 316Ti Steel Steel
1.0460 1.4404 1.4404 1.4404
11 Bonnet spacer1)
Carbon steel SA 479 316L SA 479 316L 316L
1.4021 1.4021 1.4021 1.4021
12 Spindle
420 420 420 420
1.4104 1.4404 1.4104 1.4104
14 Split ring
Chrome steel 316L Chrome steel Chrome steel
1.4571 1.4571 1.4571 1.4571
15 Bellows
316 Ti 316 Ti 316 Ti 316 Ti
1.0718 1.4404 1.0718 1.0718
16 / 17 Spring plate
1.4104 1.4404 tenifer 1.4104 1.4104
Adjusting screw
Chrome steel 316L tenifer Chrome steel Chrome steel
18
PTFE with 15% Glas PTFE 15% Glas PTFE 15% Glas PTFE 15% Glas
with bushing
–"– –"– –"– –"–
1.0718 1.4404 1.0718 1.0718
19 Lock nut
1.4404 1.4404 1.4404 1.4404
22 Lift stopper
316L 316L 316L 316L
1.0718 1.4404 1.0718 1.0718
40 Cap H2
1.8159 1.4310 1.8159 1.8159
54 Spring
High temp. alloy steel Stainless steel High temp. alloy steel High temp. alloy steel
1.4401 1.4401 1.7709 1.4401
55 Stud
B8M B8M B16 B8M
1.4401 1.4401 1.7258 1.4401
56 Nut
8M 8M 7M 8M
1.4401 1.4401 1.4401 1.4401
57 Ball
316 316 316 316
Graphite / 1.4401 Graphite / 1.4401 Graphite / 1.4401 Graphite / 1.4401
60 Gasket
Graphite / 316 Graphite / 316 Graphite / 316 Graphite / 316
1.3541 1.4401 1.3541 1.3541
61 Ball
Hardened stainless steel 316 Hardened stainless steel Hardened stainless steel
1.4401 1.4401 1.4401 1.4401
66 Screw
B8M B8M B8M B8M
1.4404 1.4404 1.4404 1.4404
69 Needle bearing
316L 316 L 316L 316L
1.4404 1.4404 1.4404 1.4404
73 Lock screw
8M 8M 8M 8M
1) Valve size 6 R 10 and 8 T 10 without bonnet spacer 2) Stellited sealing surfaces please refer to page 99/06
Please notice: Special materials:

- Modifications reserved by LESER Body and trim available in various materials (Monel®, Hastelloy® ...).
- LESER can upgrade materials without notice For nozzle and disc machined from the bar a short lead time is possible.
- Every part can be replaced by other material acc. to customer specification.
LWN 480.01-E 01/05
Type 526
Dimensions
Type 526
Metric Units
Hmax. Hmax. Hmax.
Safety valve dimensions [mm] a b s Hmax. with a b s Hmax. with a b s Hmax. with
bellows bellows bellows
Support brackets [mm] A B C D E A B C D E A B C D E

Flange rating class 150 x 150 300L x 150 300 x 150
Valve size 1D2 1D2 1D2
d0 [mm] 14 105 114 30 440 465 Please see 1 D 2 105 114 30 440 465
D A0 [mm2] 154 130 – Ø 14 132 16 300 x 150 130 – Ø 14 132 16
1E2 1E2 1E2
E d0 [mm] 14 105 114 30 440 465 Please see 1 E 2 105 114 30 440 465
A0 [mm2] 154 130 – Ø 14 132 16 300 x 150 130 – Ø14 132 16
1 1 /2 F 2 1 1/2 F 2 1 1/2 F 2
F d0 [mm] 18 124 121 32 536 561 124 121 32 536 561 124 152 35 536 561
A0 [mm2] 254 162 – Ø 14 148 16 162 – Ø 14 148 16 162 – Ø 14 148 16
1 1 /2 G 3 1 1/2 G 3 1 1 /2 G 3
G d0 [mm] 22,5 124 121 32 536 574 124 121 32 536 574 124 152 35 536 574
A0 [mm2] 398 162 – Ø 14 148 16 162 – Ø 14 148 16 162 – Ø 14 148 16
Valve size 1 1/2 H 3 1 1/2 H 3 2H3
d0 [mm] 28,3 130 124 38 542 580 130 124 38 542 580 130 124 43 666 692
H A0 [mm2] 629 162 – Ø 14 155 16 162 – Ø 14 155 16 184 110 Ø 14 177 16
2J3 2J3 2J3
J d0 [mm] 36 137 124 49 673 722 137 124 49 673 722 184 181 49 786 824
A0 [mm2] 1018 184 110 Ø 14 184 16 184 110 Ø 14 184 16 238 140 Ø 18 234 25
3K4 3K4 3K4
WCB, LCB, d0 [mm] 43 156 162 49 758 796 Please see 3 K 4 156 162 49 758 796
CF8M (WC6) A0 [mm2] 300 x 150
K 1452 238 140 Ø 18 206 25 238 140 Ø 18 206 25
WC6

d0 [mm] 53,5 156 165 49 758 796 156 165 49 758 796 179 181 49 853 886
L A0 [mm2] 2248 238 140 Ø 18 206 25 238 140 Ø 18 206 25 278 160 Ø 18 262 25
4M6 4M6 4M6
M d0 [mm] 60,3 178 184 48 852 885 Please see 4 M 6 178 184 48 852 885
A0 [mm2] 2856 278 160 Ø 18 260 25 300 x 150 278 160 Ø 18 260 25
4N6 4N6 4N6
N d0 [mm] 66 197 210 48 871 904 Please see 4 N 6 197 210 48 871 904
A0 [mm2] 3421 278 160 Ø 18 280 25 300 x 150 278 160 Ø 18 280 25
4P6 4P6 4P6
P d0 [mm] 80 181 229 48 855 888 181 229 48 855 888 225 254 62 1079 1138
A0 [mm2] 5027 278 160 Ø 18 262 25 278 160 Ø 18 262 25 370 210 Ø 18 306 25
6Q8 6Q8 6Q8
Q d0 [mm] 105,5 240 241 68 1120 1200 Please see 6 Q 8 240 241 68 1120 1200
A0 [mm2] 8742 370 210 Ø 18 346 25 300 x 150 370 210 Ø 18 346 25
6R8 6R8 6 R 10
R d0 [mm] 126,5 240 241 68 1120 1200 240 241 68 1120 1200 240 267 68 1426 1426
A0 [mm2] 12568 370 210 Ø 18 346 25 370 210 Ø 18 346 25 470 150 Ø 18 460 25
8 T 10 8 T 10 8 T 10
T d0 [mm] 161,5 276 279 62 1462 1462 Please see 8 T 10 276 279 62 1462 1462
A0 [mm2] 20485 470 150 Ø 18 497 25 300 x 150 470 150 Ø 18 497 25
01/10 LWN 480.01-E

d0 = Actual orifice diameter
A 0 = Actual orifice area
Type 526
Hmax. Hmax. Hmax. Hmax.
a b s Hmax. with a b s Hmax. with a b s Hmax. with a b s Hmax. with
bellows bellows bellows bellows
A B C D E A B C D E A B C D E A B C D E
600 x 150 900 x 300 1500 x 300 2500 x 300
1D2 1 1/2 D 2 1 1/2 D 2 1 1/2 D 3
105 114 30 440 465 Please see 1 1/
D22
105 140 44 517 542 140 178 57 576 576
130 – Ø 14 132 16 1500 x 300 162 – Ø 14 129 16 162 – Ø 14 189 16
1E2 1 1/2 E 2 1 1/2 E 2 1 1/2 E 3
105 114 30 440 465 Please see 1 1/2 E 2 105 140 44 517 542 140 178 57 576 576
130 – Ø 14 132 16 1500 x 300 162 – Ø 14 129 16 162 – Ø 14 189 16
1 1/2 F 2 1 1/2 F 3 1 1/2 F 3 1 1/2 F 3
124 152 35 536 561 Please see 1 1/2 F 3 124 165 44 560 560 140 178 57 576 576
162 – Ø 14 148 16 1500 x 300 162 – Ø 14 174 16 162 – Ø 14 189 16
1 1/2 G 3 1 1/2 G 3 2G3 2G3
124 152 35 536 574 124 165 44 560 573 156 172 68 688 705 156 172 68 688 705
162 – Ø 14 148 16 162 – Ø 14 174 16 184 110 Ø 14 198 16 184 110 Ø 14 198 16
600 x 150 900 x 150 1500 x 300
2H3 2H3 2H3
154 162 56 691 717 154 162 56 691 717 154 162 56 691 717
184 110 Ø 14 202 16 184 110 Ø 14 202 16 184 110 Ø 14 202 16
3J4 3J4 3J4
184 181 49 786 824 184 181 65 786 824 184 181 65 786 824
238 140 Ø 18 234 25 238 140 Ø 18 234 25 238 140 Ø 18 234 25
3K4 3K6 3K6
184 181 49 786 824 198 216 67 880 880 197 216 65 879 879
238 140 Ø 18 234 25 278 160 Ø 18 288 25 278 160 Ø 18 287 25
156 162 49 758 796
238 140 Ø 18 206 25
600 x 150 900 x 150 1500 x 150
4L6 4L6 4L6
179 203 57 853 886 197 222 72 871 904 197 222 72 871 904
278 160 Ø 18 262 25 278 160 Ø 18 280 25 278 160 Ø 18 280 25
4M6 4M6
178 203 56 852 885 197 222 72 871 904
278 160 Ø 18 260 25 278 160 Ø 18 280 25
4N6 4N6
197 222 72 871 904 197 222 72 871 904
278 160 Ø 18 280 25 278 160 Ø 18 280 25
4P6 4P6
225 254 62 1079 1138 225 254 62 1079 1138
370 210 Ø 18 306 25 370 210 Ø 18 306 25
6Q8
240 241 68 1120 1200
370 210 Ø 18 346 25
6 R 10
240 267 68 1426 1426
470 150 Ø 18 460 25
–
–
–
Support brackets Conventional design Balanced bellows design
LWN 480.01-E 01/11

Type 526
Weights
Metric Units
Type 526
Bonnet all
Lifting device all
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
Valve size 1D2 1D2 1D2 1D2 1 1 /2 D 2 1 1/2 D 2 1 1/2 D 3
Weight [kg] 17,3 Use 300 lbs 17,3 17,3 Use 1500 lbs 31,1 41,8
D with bellows [kg] 18,4
dimensions for
18,4 18,4
dimensions for
33,1 44,6
this size this size
1E2 1E2 1E2 1E2 1 1/ E2 1 1/ E2 1 1/ E3
2 2 2
E Weight [kg] 17,3 Use 300 lbs

dimensions for
17,3 17,3 Use 1500 lbs
dimensions for
31,1 41,8
with bellows [kg] 18,4 this size 18,4 18,4 this size 33,1 44,6
1 1/2 F 2 1 1/2 F 2 1 1 /2 F 2 1 1/2 F 2 1 1 /2 F 3 1 1/2 F 3 1 1/2 F 3
F Weight [kg] 30,6 30,6 32,5 32,5 Use 1500 lbs
dimensions for
36,3 41,8
with bellows [kg] 33,1 33,1 35 35 this size 38,6 44,6
1 1/ G3 1 1/ G3 1 1/ G3 1 1/ G3 1 1/ G3 2G3 2G3
2 2 2 2 2
G Weight [kg] 30,6 30,6 32,5 32,5 36,3 69,9 69,9

with bellows [kg] 33,1 33,1 35 35 38,6 72,5 72,5
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300
Valve size 1 1/2 H 3 1 1/2 H 3 2H3 2H3 2H3 2H3
Weight [kg] 30,6 30,6 44,6 62,2 62,2 62,2
H with bellows [kg] 33,1 33,1 48,4 65,3 65,3 65,3
2J3 2J3 3J4 3J4 3J4 3J4
J Weight [kg] 44,6 44,6 77,7 77,7 100,2 100,2
with bellows [kg] 48,4 48,4 83,2 83,2 105,7 105,7
3K4 3K4 3K4 3K4 3K6 3K6
Other WC6
K Weight [kg] 70,1
Use 300 lbs
dimensions for 70,1 77,7 70,1 127,5 127,5
this size
with bellows [kg] 75,7 75,7 83,2 75,7 134,1 134,1
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150
Valve size 3L4 3L4 4L6 4L6 4L6 4L6
Weight [kg] 70,1 70,1 112,2 122 134,1 127,5
L with bellows [kg] 75,7 75,7 118,8 128,6 140,7 134,1
4M6 4M6 4M6 4M6 4M6
M Weight [kg] 112,1 Use 300 lbs
dimensions for
112,1 122 134,1
with bellows [kg] 118,7 this size 118,7 128,6 140,7
4N6 4N6 4N6 4N6 4N6
N Weight [kg] 128,6 Use 300 lbs
dimensions for
128,6 134,1 134,1
with bellows [kg] 135,2 this size 135,2 140,7 140,7
4P6 4P6 4P6 4P6 4P6
P Weight [kg] 107,7 107,7 164 164 164
with bellows [kg] 114,8 114,8 172 172 172
6Q8 6Q8 6Q8 6Q8
Q Weight [kg] 221 Use 300 lbs
dimensions for
221 221
with bellows [kg] 230 this size 230 230
6R8 6R8 6 R 10 6 R 10
R Weight [kg] 221 221 277 277
with bellows [kg] 230 230 288 288
8 T 10 8 T 10 8 T 10
T Weight [kg] 287 Use 300 lbs
dimensions for
287
with bellows [kg] 298 this size 298
01/14 LWN 480.01-E

Type 526 Orifice D
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
WCB 5262.001X – 5262.002X 5262.003X – 5262.004X 5262.005X
WC6 – – 5267.006X 5267.007X – 5267.008X 5267.009X
p [bar]
0 25 50 75 100 150 200 250 300 350 400
1000
WC6
900 400
D
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 500 1000 1500 2000 3000 4000 5000 6000
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
CF8M 5264.010X – 5264.011X 5264.012X – 5264.013X 5264.014X
p [bar]
0 25 50 75 100 150 200 250 300 350 400
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-200 -100
-300
-400 -200
0 500 1000 1500 2000 3000 4000 5000 6000
p [psig]
01/16 LWN 480.01-E
Type 526 Orifice D
Article numbers, dimensions and weights
Article numbers
Valve size 1D2 1D2 1D2 1D2 1 1/2 D 2 1 1 /2 D 2 1 1 /2 D 3
Flange rating class Inlet x Outlet 150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
Actual Orifice diameter d0 [mm] 14 14 14 14 14 14 14
Actual Orifice area A0 [mm2] 154 154 154 154 154 154 154
Body material
WCB 1.0619 Art.-No. 5262.001¤ 5262.002¤ 5262.003¤ 5262.004¤ 5262.005¤
CF8M 1.4408 Art.-No. 5264.010¤ Use 1 D 2 5264.011¤ 5264.012¤ Use 1 1/2 D 2 5264.013¤ 5264.014¤
WC6 1.7357 Art.-No. – 300 x 150 5267.006¤ 5267.007¤ 1500 x 300 5267.008¤ 5267.009¤
LCB Art.-No. 5263.500¤ 5263.501¤ 5263.502¤ 5263.503¤ 5263.504¤
D
¤) Please add code for the required cap or lifting device. See below.

Metric Units
Weight 17,3 17,3 17,3 31,1 41,8
[kg] with bellows 18,4 18,4 18,4 33,1 44,6
Center to face Inlet a 105 105 105 105 140
[mm] Outlet b 114 114 114 140 178
s 30 Use 1 D 2 30 30 1/
Use 1 2 D 2 44 57
Height (H4) Standard H max. 440 300 x 150 440 440 1500 x 300 517 576
[mm] Bellows H max. 465 465 465 542 576
Support brackets A 130 130 130 162 162
[mm] B – – – – –
C Ø 14 Ø 14 Ø 14 Ø 14 Ø 14
D 132 132 132 129 189
E 16 16 16 16 16
US Units
Weight 38,1 38,1 38,1 68,6 92,2
[lbs] with bellows 40,5 40,5 40,5 73 98,4
Center to face Inlet a 4 1/8 4 1/8 4 1/8 4 1/8 5 1/2
[inch] Outlet b 4 1/2 4 1/2 4 1/2 5 1/2 7
s 1 3/16 Use 1 D 2 1 3/16 1 3/16 Use 1 1/2 D 2 1 3/4 2 1/4
Height (H4) Standard H max. 17 5/16 300 x 150 17 5/16 17 5/16 1500 x 300 20 11/32 22 11/16
[inch] Bellows H max. 18 5/16 18 5/16 18 5/16 21 11/32 22 11/16
Support brackets A 5 1/8 5 1/8 5 1/8 6 3/8 6 3/8
[inch] B – – – – –
C Ø 9/16 Ø 9/16 Ø 9/16 Ø 9/16 Ø 9/16
D 5 7/32 5 7/32 5 7/32 5 7/32 7 15/32
E 5/ 5/ 5/ 5/ 5/
8 8 8 8 8
¤ Code for lifting device

Lifting device H2 H3 H4 H3
WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/17

Type 526 Orifice D
Metric Units
Valve size 1D2 1D2 1D2 1D2 1 1/2 D 2 1 1 /2 D 2 1 1/2 D 3
D
Body material: WCB 1.0619
Temperature range Pressure range p [bar] S/G/L
Maximum -29 to 38 °C 19,7 51,0 102,1 255,5 413,8
set pressure 39 to 232 °C 12,8 42,4 85,2 212,4 354,1
233 to 427 °C 5,5 Use 1 D 2 28,3 56,9 1/
Use 1 2 D 2 142,1 236,6
Outlet pressure limit 300 x 150 1500 x 300
19,7 19,7 19,7 41,4 51,0
Conventional design
Outlet pressure limit
15,9 15,9 15,9 34,5 34,5
Body material: CF8M 1.4408
Maximum -268 to -60 °C 19,0 49,7 99,3 248,3 275,9
set pressure -59 to -29 °C 19,0 49,7 99,3 248,3 413,8
-28 to 38 °C 19,0 49,7 99,3 248,3 413,8
39 to 232 °C 12,4 Use 1 D 2 34,1 68,3 1/
Use 1 2 D 2 171,0 284,8
233 to 427 °C 5,5 300 x 150 29,0 58,3 1500 x 300 145,5 242,8
428 to 538 °C 1,4 24,1 48,3 120,7 201,0
19,0 19,0 19,0 41,4 49,7
Conventional design
15,9 15,9 15,9 34,5 34,5
Body material: WC6 1.7357
Maximum 233 to 427 °C – – 35,2 70,0 175,2 291,7
set pressure 428 to 538 °C – – 14,8 29,7 74,5 124,1
Outlet pressure limit Use 1 1/2 D 2
– – 19,7 19,7 1500 x 300 41,4 51,0
Conventional design
– – 15,9 15,9 34,5 34,5
Body material: LCB
Maximum -46 to 38 °C 18,4 48,0 96,0 240,1 400,1
set pressure 39 to 200 °C 13,8 42,5 85,1 212,7 354,4
201 to 343 °C 8,4 Use 1 D 2
36,4 72,8 Use 1 1/2 D 2
182,0 303,3
19,7 19,7 19,7 41,4 51,0
Conventional design
15,9 15,9 15,9 34,5 34,5
Remark: SA 352 Gr. LCB is not listed in the API 526. Pressure-Temperature Rating acc. to ASME B16.34 Table 2-1.3
The stated Pressure-Temperature Rating are taken from ASME B16.34 Table 2-1.3
Due to the extended material test certificate the LESER LCB can be applied as LCC, WCB, WCC and 1.0619
with the respective pressure-temperature range as well.
01/18 LWN 480.01-E

Type 526 Orifice E
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
WCB 5262.015X – 5262.016X 5262.017X – 5262.018X 5262.019X
WC6 – – 5267.020X 5267.021X – 5267.022X 5267.023X
p [bar]
0 25 50 75 100 150 200 250 300 350 400
1000
WC6
900 400
800
700
E 300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 500 1000 1500 2000 3000 4000 5000 6000
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
CF8M 5264.024X – 5264.025X 5264.026X – 5264.027X 5264.028X
p [bar]
0 25 50 75 100 150 200 250 300 350 400
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-200 -100
-300
-400 -200
0 500 1000 1500 2000 3000 4000 5000 6000
p [psig]
01/20 LWN 480.01-E
Type 526 Orifice E
Article numbers
Valve size 1E2 1E2 1E2 1E2 1 1/2 E 2 1 1/2 E 2 1 1 /2 E 3
Body material
WCB 1.0619 Art.-No. 5262.015¤ 5262.016¤ 5262.017¤ 5262.018¤ 5262.019¤
CF8M 1.4408 Art.-No. 5264.024¤ Use 1 E 2 5264.025¤ 5264.026¤ Use 1 1/2 E 2 5264.027¤ 5264.028¤
WC6 1.7357 Art.-No. – 300 x 150 5267.020¤ 5267.021¤ 1500 x 300 5267.022¤ 5267.023¤
LCB Art.-No. 5263.505¤ 5263.506¤ 5263.507¤ 5263.508¤ 5263.509¤
E
Metric Units
Weight 17,3 17,3 17,3 31,1 41,8
[kg] with bellows 18,4 18,4 18,4 33,1 44,6
[mm] Outlet b 114 114 114 140 178
s 30 Use 1 E 2 30 30 Use 1 1/
E2
2
44 57
Height (H4) Standard H max. 440 300 x 150 440 440 1500 x 300 517 576
[mm] Bellows H max. 465 465 465 542 576
[mm] B – – – – –
C Ø 14 Ø 14 Ø 14 Ø 14 Ø 14
D 132 132 132 129 189
E 16 16 16 16 16
US Units
Weight 38,1 38,1 38,1 68,6 92,2
[lbs] with bellows 40,5 40,5 40,5 73 98,4
Center to face Inlet a 4 1/8 4 1/8 4 1/8 4 1/8 5 1/2
[inch] Outlet b 4 1/2 4 1/2 4 1/2 5 1/2 7
s 1 3/16 Use 1 E 2 1 3/16 1 3/16 Use 1 1/2 E 2 1 3/4 2 1/4
Height (H4) Standard H max. 17 5/16 300 x 150 17 5/16 17 5/16 1500 x 300 20 11/32 22 11/16
[inch] B – – – – –
C Ø 9/16 Ø 9/16 Ø 9/16 Ø 9/16 Ø 9/16
D 5 7/32 5 7/32 5 7/32 5 7/32 7 15/32
E 5/ 5/ 5/ 5/ 5/
8 8 8 8 8

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/21

Type 526 Orifice E
Metric Units
Valve size 1E2 1E2 1E2 1E2 1 1/2 E 2 1 1/2 E 2 1 1/2 E 3
E
Maximum -29 to 38 °C 19,7 51,0 102,1 255,5 413,8
set pressure 39 to 232 °C 12,8 42,4 85,2 212,4 354,1
233 to 427 °C 5,5 Use 1 E 2 28,3 56,9 1/
Use 1 2 E 2 142,1 236,6
19,7 19,7 19,7 41,4 51,0
Conventional design
15,9 15,9 15,9 34,5 34,5
Maximum -268 to -60 °C 19,0 49,7 99,3 248,3 275,9
set pressure -59 to -29 °C 19,0 49,7 99,3 248,3 413,8
-28 to 38 °C 19,0 49,7 99,3 248,3 413,8
39 to 232 °C 12,4 Use 1 E 2 34,1 67,2 1/
Use 1 2 E 2 171,0 284,8
233 to 427 °C 5,5 300 x 150 29,0 58,3 1500 x 300 145,5 242,8
428 to 538 °C 1,4 24,1 48,3 120,7 201,0
19,0 19,0 19,0 41,4 49,7
Conventional design
15,9 15,9 15,9 34,5 34,5
Maximum 233 to 427 °C – – 35,2 70,0 175,2 291,7
set pressure 428 to 538 °C – – 14,8 29,7 74,5 124,1
Outlet pressure limit Use 1 1/2 E 2
– – 19,7 19,7 1500 x 300 41,4 51,0
Conventional design
– – 15,9 15,9 34,5 34,5
Body material: LCB
Maximum -46 to 38 °C 18,4 48,0 96,0 240,1 400,1
set pressure 39 to 200 °C 13,8 42,5 85,1 212,7 354,4
201 to 343 °C 8,4 Use 1 E 2
36,4 72,8 Use 1 1/2 E 2
182,0 303,3
19,7 19,7 19,7 41,4 51,0
Conventional design
15,9 15,9 15,9 34,5 34,5
01/22 LWN 480.01-E

Type 526 Orifice F
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
WCB 5262.029X 5262.030X 5262.031X 5262.032X – 5262.033X 5262.034X
WC6 – – 5267.035X 5267.036X – 5267.037X 5267.038X
p [bar]
0 25 50 75 100 150 200 250 300 350 400
1000
WC6
900 400
800
700
300
600
500
F
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 500 1000 1500 2000 3000 4000 5000 6000
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
CF8M 5264.039X 5264.040X 5264.041X 5264.042X – 5264.043X 5264.044X
p [bar]
0 25 50 75 100 150 200 250 300 350 400
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-100
-200
-300
-400 -200
0 500 1000 1500 2000 3000 4000 5000 6000
p [psig]
01/24 LWN 480.01-E
Type 526 Orifice F
Article numbers
Valve size 1 1/2 F 2 1 1/2 F 2 1 1/2 F 2 1 1/2 F 2 1 1/2 F 3 1 1 /2 F 3 1 1/2 F 3
Body material
WCB 1.0619 Art.-No. 5262.029¤ 5262.030¤ 5262.031¤ 5262.032¤ 5262.033¤ 5262.034¤
CF8M 1.4408 Art.-No. 5264.039¤ 5264.040¤ 5264.041¤ 5264.042¤ Use 1 1/2 F 3 5264.043¤ 5264.044¤
WC6 1.7357 Art.-No. – – 5267.035¤ 5267.036¤ 1500 x 300 5267.037¤ 5267.038¤
LCB Art.-No. 5263.510¤ 5263.511¤ 5263.512¤ 5263.513¤ 5263.514¤ 5263.515¤

Metric Units F
Weight 30,6 30,6 32,5 32,5 36,3 41,8
[kg] with bellows 33,1 33,1 35 35 38,6 44,6
Center to face Inlet a 124 124 124 124 124 140
[mm] Outlet b 121 121 152 152 165 178
s 32 32 35 35 1/
Use 1 2 F 3 44 57
Height (H4) Standard H max. 536 536 536 536 1500 x 300 560 576
[mm] Bellows H max. 561 561 561 561 560 576
Support brackets A 162 162 162 162 162 162
[mm] B – – – – – –
C Ø 14 Ø 14 Ø 14 Ø 14 Ø 14
D 148 148 148 148 174 189
E 16 16 16 16 16 16
US Units
Weight 67,5 67,5 71,1 71,1 80 92,2
[lbs] with bellows 73 73 77,2 77,2 85,1 98,4
Center to face Inlet a 4 7/8 4 7/8 4 7/8 4 7/8 4 7/8 5 1/2
[inch] Outlet b 4 3/4 4 3/4 6 6 6 1/2 7
s 1 1/4 1 1/
4 1 13/32 1 13/32 Use 1 1/2 F 3 1 3/4 2 1/4
Height (H4) Standard H max. 21 3/32 21 3/32 21 3/32 21 3/32 1500 x 300 22 1/16 22 11/16
[inch] Bellows H max. 22 3/32 22 3/32 22 3/32 22 3/32 22 1/16 22 11/16
Support brackets A 6 3/8 6 3/8 6 3/8 6 3/8 6 3/8 6 3/8
[inch] B – – – – – –
C Ø 9/16 Ø 9/16 Ø 9/16 Ø 9/16 Ø 9/16 Ø 9/16
D 5 27/32 5 27/32 5 27/32 5 27/32 6 27/32 6 27/32
E 5/ 5/ 5/ 5/ 5/ 5/
8 8 8 8 8 8

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/25

Type 526 Orifice F
Metric Units
Valve size 1 1 /2 F 2 1 1/2 F 2 1 1/2 F 2 1 1/2 F 2 1 1/2 F 3 1 1 /2 F 3 1 1/2 F 3
Maximum -29 to 38 °C 19,7 19,7 51,0 102,1 255,5 344,8
set pressure 39 to 232 °C 12,8 19,7 42,4 85,2 212,4 344,8
F 233 to 427 °C 5,5 19,7 28,3 56,9 1/

Use 1 2 F 3 142,1 236,6
Outlet pressure limit 1500 x 300
19,7 19,7 19,7 19,7 51,0 51,0
Conventional design
15,9 15,9 15,9 15,9 34,5 34,5
Maximum -268 to -60 °C 19,0 19,0 49,7 99,3 151,7 234,5
set pressure -59 to -29 °C 19,0 19,0 49,7 99,3 248,3 344,8
-28 to 38 °C 19,0 19,0 49,7 99,3 248,3 344,8
39 to 232 °C 12,4 12,4 34,1 67,2 1/
Use 1 2 F 3 171,0 284,8
233 to 427 °C 5,5 5,5 29,0 58,3 1500 x 300 145,5 242,8
428 to 538 °C 1,4 1,4 24,1 48,3 120,7 201,0
19,0 19,0 19,0 19,0 41,4 49,7
Conventional design
15,9 15,9 15,9 15,9 34,5 34,5
Maximum 233 to 427 °C – – 35,2 70,0 175,2 291,7
set pressure 428 to 538 °C – – 14,8 29,7 74,5 124,1
Outlet pressure limit Use 1 1/2 F 3
– – 19,7 19,7 1500 x 300 51,0 51,0
Conventional design
– – 15,9 15,9 34,5 34,5
Body material: LCB
Maximum -46 to 38 °C 18,4 18,4 48,0 96,0 240,1 400,1
set pressure 39 to 200 °C 13,8 13,8 42,5 85,1 212,7 354,4
201 to 343 °C 8,4 8,4 36,4 72,8 Use 1 1/2 F 3
182,0 303,3
19,7 19,7 19,7 19,7 51,0 51,0
Conventional design
15,9 15,9 15,9 15,9 34,5 34,5
01/26 LWN 480.01-E

Type 526 Orifice G
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
WCB 5262.045X 5262.046X 5262.047X 5262.048X 5262.049X 5262.050X 5262.051X
WC6 – – 5267.052X 5267.053X 5267.054X 5267.055X 5267.056X
p [bar]
0 25 50 75 100 150 200 250
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
G
100
200
100
0
0
0 500 1000 1500 2000 3000 4000
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
CF8M 5264.110X 5264.111X 5264.112X 5264.113X 5264.114X 5264.115X 5264.116X
p [bar]
0 25 50 75 100 150 200 250
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-100
-200
-300
-400 -200
0 500 1000 1500 2000 3000 4000
p [psig]
01/28 LWN 480.01-E
Type 526 Orifice G
Article numbers
Valve size 1 1/2 G 3 1 1 /2 G 3 1 1/2 G 3 1 1/2 G 3 1 1/2 G 3 2G3 2G3
Actual Orifice diameter d0 [mm] 22,5 22,5 22,5 22,5 22,5 22,5 22,5
Body material
WCB 1.0619 Art.-No. 5262.045¤ 5262.046¤ 5262.047¤ 5262.048¤ 5262.049¤ 5262.050¤ 5262.051¤
CF8M 1.4408 Art.-No. 5264.110¤ 5264.111¤ 5264.112¤ 5264.113¤ 5264.114¤ 5264.115¤ 5264.116¤
WC6 1.7357 Art.-No. – – 5267.052¤ 5267.053¤ 5267.054¤ 5267.055¤ 5267.056¤
LCB Art.-No. 5263.516¤ 5263.517¤ 5263.518¤ 5263.519¤ 5263.520¤ 5263.521¤ 5263.522¤

Metric Units
Weight 30,6 30,6 32,5 32,5 36,3 69,9 69,9
[kg] with bellows 33,1 33,1 35 35 38,6 72,5 72,5
Center to face Inlet a 124 124 124 124 124 156 156 G
[mm] Outlet b 121 121 152 152 165 172 172
s 32 32 35 35 44 68 68
Height (H4) Standard H max. 536 536 536 536 560 688 688
[mm] Bellows H max. 574 574 574 574 573 705 705
Support brackets A 162 162 162 162 162 184 184
[mm] B – – – – – 110 110
C Ø 14 Ø 14 Ø 14 Ø 14 Ø 14 Ø 14 Ø 14
D 148 148 148 148 174 198 198
E 16 16 16 16 16 16 16
US Units
Weight 67,5 67,5 71,7 71,7 80 154,1 154,1
[lbs] with bellows 73 73 77,2 77,2 85,1 159,9 159,9
Center to face Inlet a 4 7/8 4 7/8 4 7/8 4 7/8 4 7/8 6 1/8 6 1/8
[inch] Outlet b 4 3/ 4 3/ 6 6 6 1/2 6 3/ 6 3/4
4 4 4
s 1 1/ 1 1/ 1 13/32 1 13/ 1 3/4 2 11/ 2 11/16
4 4 32 16
Height (H4) Standard H max. 21 3/32 21 3/32 21 3/32 21 3/32 22 1/16 27 3/32 27 3/32
[inch] Bellows H max. 22 19/32 22 19/32 22 19/32 22 19/32 22 9/16 27 3/4 27 3/4
Support brackets A 6 3/8 6 3/8 6 3/8 6 3/8 6 3/8 7 1/4 7 1/4
[inch] B – – – – – 4 11/32 4 11/32
C Ø 9/ Ø 9/ Ø 9/ Ø 9/16 Ø 9/ Ø 9/16 Ø 9/16
16 16 16 16
D 5 27/ 5 27/ 5 27/ 5 27/32 6 27/ 7 13/16 7 13/16
32 32 32 32
E 5/ 5/ 5/ 5/ 5/ 5/ 5/
8 8 8 8 8 8 8

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/29

Type 526 Orifice G
Metric Units
Valve size 1 1 /2 G 3 1 1/2 G 3 1 1/2 G 3 1 1/2 G 3 1 1/2 G 3 2G3 2G3
Actual Orifice diameter d0 [mm] 22,5 22,5 22,5 22,5 22,5 22,5 22,5
Maximum -29 to 38 °C 19,7 19,7 51,0 102,1 153,1 255,5 255,5
set pressure 39 to 232 °C 12,8 19,7 42,4 85,2 127,2 212,4 255,5
233 to 427 °C 5,5 19,7 28,3 56,9 85,2 142,1 236,6
19,7 19,7 19,7 19,7 51,0 51,0 51,0
Conventional design
G Outlet pressure limit

15,9 15,9 15,9 15,9 32,4 32,4 32,4
Maximum -268 to -60 °C 19,0 19,0 49,7 99,3 149,0 169,0 179,3
set pressure -59 to -29 °C 19,0 19,0 49,7 99,3 149,0 248,3 248,3
-28 to 38 °C 19,0 19,0 49,7 99,3 149,0 248,3 248,3
39 to 232 °C 12,4 12,4 34,1 67,2 102,4 171,0 248,3
233 to 427 °C 5,5 5,5 29,0 58,3 87,2 145,5 242,8
428 to 538 °C 1,4 1,4 24,1 48,3 72,4 120,7 201,0
19,0 19,0 19,0 19,0 41,4 41,4 49,7
Conventional design
15,9 15,9 15,9 15,9 32,4 32,4 32,4
Maximum 233 to 427 °C – – 35,2 70,0 105,2 175,2 255,5
set pressure 428 to 538 °C – – 14,8 29,7 44,8 74,5 124,1
– – 19,7 19,7 51,0 51,0 51,0
Conventional design
– – 15,9 15,9 32,4 32,4 32,4
Body material: LCB
Maximum -46 to 38 °C 18,4 18,4 48,0 96,0 144,1 240,1 400,1
set pressure 39 to 200 °C 13,8 13,8 42,5 85,1 127,6 212,7 354,4
201 to 343 °C 8,4 8,4 36,4 72,8 109,2 182,0 303,3
19,7 19,7 19,7 19,7 51,0 51,0 51,0
Conventional design
15,9 15,9 15,9 15,9 32,4 32,4 32,4
01/30 LWN 480.01-E

Type 526 Orifice H
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300 2500 x 300
WCB 5262.142X 5262.143X 5262.144X 5262.145X 5262.146X 5262.147X –
WC6 – – 5267.148X 5267.149X 5267.150X 5267.151X –
p [bar]
0 25 50 75 100 125 150 175 200
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
H 100
0
0
0 500 1000 1500 2000 2500 3000
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300 2500 x 300
CF8M 5264.152X 5264.153X 5264.154X 5264.155X 5264.156X 5264.157X –
p [bar]
0 25 50 75 100 125 150 175 200
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-100
-200
-300
-400 -200
0 500 1000 1500 2000 2500 3000
p [psig]
01/32 LWN 480.01-E
Type 526 Orifice H
Article numbers
Flange rating class Inlet x Outlet 150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300
Actual Orifice diameter d0 [mm] 28,3 28,3 28,3 28,3 28,3 28,3
Actual Orifice area A0 [mm2] 629 629 629 629 629 629
Body material
WCB 1.0619 Art.-No. 5262.142¤ 5262.143¤ 5262.144¤ 5262.145¤ 5262.146¤ 5262.147¤
CF8M 1.4408 Art.-No. 5264.152¤ 5264.153¤ 5264.154¤ 5264.155¤ 5264.156¤ 5264.157¤
WC6 1.7357 Art.-No. – – 5267.148¤ 5267.149¤ 5267.150¤ 5267.151¤
LCB Art.-No. 5263.523¤ 5263.524¤ 5263.525¤ 5263.526¤ 5263.527¤ 5263.528¤

Metric Units
Weight 30,6 30,6 44,6 62,2 62,2 62,2
[kg] with bellows 33,1 33,1 48,4 65,3 65,3 65,3
[mm] Outlet b 124 124 124 162 162 162
s 38 38 43 56 56 56
Height (H4) Standard H max. 542 542 666 691 691 691
[mm] Bellows H max. 580 580 692 717 717 717
H
[mm] B – – 110 110 110 110
C Ø 14 Ø 14 Ø 14 Ø 14 Ø 14 Ø 14
D 155 155 177 202 202 202
E 16 16 16 16 16 16
US Units
Weight 67,5 67,5 98,3 137,2 137,2 137,2
[lbs] with bellows 73 73 106,7 144 144 144
Center to face Inlet a 5 1/8 5 1 /8 5 1/8 6 1/16 6 1/16 6 1/16
[inch] Outlet b 4 7/8 4 7 /8 4 7/8 6 3/8 6 3/8 6 3/8
s 1 1/2 1 1/2 1 1/16 2 3/16 2 3/16 2 3/16
Height (H4) Standard H max. 21 11/32 21 11/32 26 7/32 27 7/32 27 7/32 27 7/32
[inch] B – – 4 11/ 4 11/ 4 11/32 4 11/32
32 32
C Ø 9/ Ø 9/16 Ø 9/ Ø 9/16 Ø 9/16 Ø 9/16
16 16
D 6 3/ 6 3/32 6 31/ 7 15/16 7 15/16 7 15/16
32 32
E 5/ 5/ 5/ 5/ 5/ 5/
8 8 8 8 8 8

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/33

Type 526 Orifice H
Metric Units
Maximum -29 to 38 °C 19,7 19,7 51,0 102,1 153,1 189,7
set pressure 39 to 232 °C 12,8 19,7 42,4 85,2 127,2 189,7
233 to 427 °C 5,5 19,7 28,3 56,9 85,2 142,1
19,7 19,7 19,7 19,7 19,7 51,0
Conventional design
15,9 15,9 15,9 15,9 15,9 28,6
H
Maximum -268 to -60 °C 19,0 19,0 49,7 99,3 102,4 110,3
set pressure -59 to -29 °C 19,0 19,0 49,7 99,3 149,0 189,7
-28 to 38 °C 19,0 19,0 49,7 99,3 149,0 189,7
39 to 232 °C 12,4 12,4 34,1 67,2 102,4 171,0
233 to 427 °C 5,5 5,5 29,0 58,3 87,2 145,5
428 to 538 °C 1,4 1,4 24,1 48,3 72,4 120,7
19,0 19,0 19,0 19,0 41,4 41,4
Conventional design
15,9 15,9 15,9 15,9 15,9 28,6
Maximum 233 to 427 °C – – 35,2 70,0 105,2 175,2
set pressure 428 to 538 °C – – 14,8 29,7 44,8 74,5
– – 19,7 19,7 19,7 51,0
Conventional design
– – 15,9 15,9 15,9 28,6
Body material: LCB
Maximum -46 to 38 °C 18,4 18,4 48,0 96,0 144,1 240,1
set pressure 39 to 200 °C 13,8 13,8 42,5 85,1 127,6 212,7
201 to 343 °C 8,4 8,4 36,4 72,8 109,2 182,0
19,7 19,7 19,7 19,7 19,7 51,0
Conventional design
15,9 15,9 15,9 15,9 15,9 28,6
01/34 LWN 480.01-E

Type 526 Orifice J
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300 2500 x 300
WCB 5262.162X 5262.163X 5262.164X 5262.165X 5262.166X 5262.167X –
WC6 – – 5267.168X 5267.169X 5267.170X 5267.171X –
p [bar]
0 25 50 75 100 125 150 175 200
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 500 1000 1500 2000 2500 3000

J
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300 2500 x 300
CF8M 5264.196X 5264.197X 5264.198X 5264.199X 5264.200X 5264.201X –
p [bar]
0 25 50 75 100 125 150 175 200
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-100
-200
-300
-400 -200
0 500 1000 1500 2000 2500 3000
p [psig]
01/36 LWN 480.01-E
Type 526 Orifice J
Article numbers
Valve size 2J3 2J3 3J4 3J4 3J4 3J4
Actual Orifice diameter d0 [mm] 36 36 36 36 36 36
Body material
WCB 1.0619 Art.-No. 5262.162¤ 5262.163¤ 5262.164¤ 5262.165¤ 5262.166¤ 5262.167¤
CF8M 1.4408 Art.-No. 5264.196¤ 5264.197¤ 5264.198¤ 5264.199¤ 5264.200¤ 5264.201¤
WC6 1.7357 Art.-No. – – 5267.168¤ 5267.169¤ 5267.170¤ 5267.171¤
LCB Art.-No. 5263.529¤ 5263.530¤ 5263.531¤ 5263.532¤ 5263.533¤ 5263.534¤

Metric Units
Weight 44,6 44,6 77,7 77,7 100,2 100,2
[kg] with bellows 48,4 48,4 83,2 83,2 105,7 105,7
[mm] Outlet b 124 124 181 181 181 181
s 49 49 49 49 65 65
[mm] Bellows H max. 722 722 824 824 824 824
[mm] B 110 110 140 140 140 140 J
C Ø 14 Ø 14 Ø 18 Ø 18 Ø 18 Ø 18
D 184 184 234 234 234 234
E 16 16 25 25 25 25
US Units
Weight 98,3 98,3 171,3 171,3 220,9 220,9
[lbs] with bellows 106,7 106,7 183,5 183,5 233,1 233,1
[inch] Outlet b 4 7/ 4 7/ 7 1/ 7 1/ 7 1/8 7 1/8
8 8 8 8
s 1 15/16 1 15/16 1 15/
16 1 15/
16 2 9/16 2 9/16
Height (H4) Standard H max. 26 1/2 26 1/2 30 15/16 30 15/16 30 15/16 30 15/16
Support brackets A 7 1/4 7 1 /4 9 3/8 9 3/8 9 3/8 9 3/8
[inch] B 4 11/32 4 11/32 5 1/2 5 1/2 5 1/2 5 1/2
C Ø 9/16 Ø 9/16 Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32
D 7 1/4 7 1 /4 9 7/32 9 7/32 9 7/32 9 7/32
E 5/ 5/ 31/ 31/ 31/ 31/
8 8 32 32 32 32

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/37

Type 526 Orifice J
Metric Units
Valve size 2J3 2J3 3J4 3J4 3J4 3J4
Maximum -29 to 38 °C 19,7 19,7 51,0 102,1 153,1 186,2
set pressure 39 to 232 °C 12,8 19,7 42,4 85,2 127,2 186,2
233 to 427 °C 5,5 19,7 28,3 56,9 85,2 142,1
19,7 19,7 19,7 19,7 19,7 41,4
Conventional design
15,9 15,9 15,9 15,9 15,9 15,9
Maximum -268 to -60 °C 19,0 19,0 34,5 43,1 55,2 55,2
set pressure -59 to -29 °C 19,0 19,0 49,7 99,3 149,0 186,2
J -28 to 38 °C 19,0 19,0 49,7 99,3 149,0 186,2
39 to 232 °C 12,4 12,4 34,1 67,2 102,4 171,0
233 to 427 °C 5,5 5,5 29,0 58,3 87,2 145,5
428 to 538 °C 1,4 1,4 24,1 48,3 72,4 120,7
19,0 19,0 19,0 19,0 19,0 41,4
Conventional design
15,9 15,9 15,9 15,9 15,9 15,9
Maximum 233 to 427 °C – – 35,2 70,0 105,2 175,2
set pressure 428 to 538 °C – – 14,8 29,7 44,8 74,5
– – 19,7 19,7 19,7 41,4
Conventional design
– – 15,9 15,9 15,9 15,9
Body material: LCB
Maximum -46 to 38 °C 18,4 18,4 48,0 96,0 144,1 240,1
set pressure 39 to 200 °C 13,8 13,8 42,5 85,1 127,6 212,7
201 to 343 °C 8,4 8,4 36,4 72,8 109,2 182,0
19,7 19,7 19,7 19,7 19,7 41,4
Conventional design
15,9 15,9 15,9 15,9 15,9 15,9
01/38 LWN 480.01-E

Type 526 Orifice K
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300 2500 x 300
WCB 5262.202X – 5262.203X 5262.204X 5262.205X 5262.206X –
WC6 – – 5267.207X 5267.208X 5267.209X 5267.210X –
p [bar]
0 25 50 75 100 125 150 175 200
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 500 1000 1500 2000 2500
p [psig]
K
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300 2500 x 300
CF8M 5264.211X – 5264.212X 5264.213X 5264.214X 5264.215X –
p [bar]
0 25 50 75 100 125 150 175 200
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-100
-200
-300
-400 -200
0 500 1000 1500 2000 2500
p [psig]
01/40 LWN 480.01-E
Type 526 Orifice K
Article numbers
Valve size 3K4 3K4 3K4 3K4 3K6 3K6
Body material
WCB 1.0619 Art.-No. 5262.202¤ 5262.203¤ 5262.204¤ 5262.205¤ 5262.206¤
CF8M 1.4408 Art.-No. 5264.111¤ Use 3 K 4 5264.112¤ 5264.113¤ 5264.114¤ 5264.115¤
WC6 1.7357 Art.-No. – 300 x 150 5267.207¤ 5267.208¤ 5267.209¤ 5267.210¤
LCB Art.-No. 5263.535¤ 5263.536¤ 5263.537¤ 5263.538¤ 5263.539¤

Metric Units
Other WC6
Weight 70,1 70,1 77,7 70,1 127,5 127,5
[kg] with bellows 75,7 75,7 83,2 75,7 134,1 134,1
[mm] Outlet b 162 162 181 162 216 216
s 49 Use 3 K 4 49 49 49 67 65
Height (H4) Standard H max. 758 300 x 150 758 786 758 880 879
[mm] Bellows H max. 796 796 824 796 880 879
[mm] B 140 140 140 140 160 160
C Ø 18 Ø 18 Ø 18 Ø 18 Ø 18 Ø 18
D 206 206 234 206 288 287
E 25 25 25 25 25 25 K
US Units
Weight 154,6 154,6 171,3 154,6 281,1 281,1
[lbs] with bellows 166,9 166,9 183,5 166,9 295,7 295,7
Center to face Inlet a 6 1/8 6 1/
8 7 1/
4 6 1/
8 7 13/
16 7 3 /4
[inch] Outlet b 6 3/8 6 3/ 7 1/8 6 3/ 8 1/ 8 1 /2
8 8 2
s 1 15/16 Use 3 K 4 1 15/
16 1 15/16 1 16
15/ 2 9/
16 2 9/16
Height (H4) Standard H max. 29 27/32 300 x 150 29 27/32 30 15/16 29 27/32 34 21/32 34 19/32
[inch] B 5 1/2 5 1/2 5 1/2 5 1/2 6 5/16 6 5/16
C Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32
D 8 3/32 8 3/32 9 7/32 8 3/32 11 11/32 11 9/32
E 31/ 31/ 31/ 31/ 31/ 31/
32 32 32 32 32 32

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/41

Type 526 Orifice K
Metric Units
Valve size 3K4 3K4 3K4 3K4 3K6 3K6
Maximum -29 to 38 °C 19,7 51,0 102,1 153,1 153,1
set pressure 39 to 232 °C 12,8 42,4 85,2 127,2 153,1
233 to 427 °C 5,5 Use 3 K 4
28,3 56,9 85,2 142,1
19,7 19,7 19,7 19,7 41,4
Conventional design
10,3 10,3 13,8 13,8 13,8
Maximum -268 to -60 °C 19,0 36,2 41,4 41,4 51,7
set pressure -59 to -29 °C 19,0 49,7 99,3 149,0 153,1
-28 to 38 °C 19,0 49,7 99,3 149,0 153,1
39 to 232 °C 12,4 34,1 67,2 102,4 171,0
233 to 427 °C 5,5 Use 3 K 4 29,0 58,3 87,2 145,5
300 x 150
K 428 to 538 °C 1,4 24,1 48,3 72,4 120,7
19,0 19,0 19,0 19,0 41,4
Conventional design
10,3 10,3 13,8 13,8 13,8
Maximum 233 to 427 °C – – 35,2 70,0 105,2 153,1
set pressure 428 to 538 °C – – 14,8 29,7 44,8 74,5
– – 19,7 19,7 19,7 41,4
Conventional design
– – 10,3 13,8 13,8 13,8
Body material: LCB
Maximum -46 to 38 °C 18,4 48,0 96,0 144,1 240,1
set pressure 39 to 200 °C 13,8 42,5 85,1 127,6 212,7
201 to 343 °C 8,4 36,4 72,8 109,2 182,0
Use 3 K 4
19,7 19,7 19,7 19,7 41,4
Conventional design
10,3 10,3 13,8 13,8 13,8
01/42 LWN 480.01-E

Type 526 Orifice L
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
WCB 5262.232X 5262.233X 5262.234X 5262.235X 5262.236X 5262.237X –
WC6 – – 5267.238X 5267.239X 5267.240X 5267.241X –
p [bar]
0 20 40 60 80 100
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 250 500 750 1000 1250 1500
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
CF8M 5264.242X 5264.243X 5264.244X 5264.245X 5264.246X – –
L
p [bar]
0 20 40 60 80 100
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-100
-200
-300
-400 -200
0 250 500 750 1000 1250 1500
p [psig]
01/44 LWN 480.01-E
Type 526 Orifice L
Article numbers
Body material
WCB 1.0619 Art.-No. 5262.232¤ 5262.233¤ 5262.234¤ 5262.235¤ 5262.236¤ 5262.237¤
CF8M 1.4408 Art.-No. 5264.242¤ 5264.243¤ 5264.244¤ 5264.245¤ 5264.246¤ –
WC6 1.7357 Art.-No. – – 5267.238¤ 5267.239¤ 5267.240¤ 5267.241¤
LCB Art.-No. 5263.540¤ 5263.541¤ 5263.542¤ 5263.543¤ 5263.544¤ 5263.545¤

Metric Units
Weight 70,1 70,1 112,2 122 134,1 127,5
[kg] with bellows 75,7 75,7 118,8 128,6 140,7 134,1
[mm] Outlet b 165 165 181 203 222 222
s 49 49 49 57 72 72
[mm] Bellows H max. 796 796 886 886 904 904
[mm] B 140 140 160 160 160 160
C Ø 18 Ø 18 Ø 18 Ø 18 Ø 18 Ø 18
D 206 206 262 262 280 280
E 25 25 25 25 25 25
US Units
Weight 154,6 154,6 247,4 269 295,7 281,1
[lbs] with bellows 166,9 166,9 262 283,6 310,2 295,7
L
[inch] Outlet b 6 1/2 6 1 /2 7 1/8 8 8 3/4 8 3/4
s 1 15/16 1 15/16 1 15/16 2 1/4 2 3/4 2 3/4
Height (H4) Standard H max. 27/
29 32 29 32 27/ 33 3219/ 33 19/32 34 9/ 34 9/32
32
Support brackets A 9 3/8 9 3 /8 10 15/16 10 15/16 10 15/16 10 15/16
[inch] B 5 1/2 5 1/ 6 5/ 6 5/16 6 5/16 6 5/16
2 16
C Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32
D 8 3/32 8 3/32 10 15/16 10 15/16 11 11
E 31/ 31/ 31/ 31/ 31/ 31/
32 32 32 32 32 32

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/45

Type 526 Orifice L
Metric Units
Maximum -29 to 38 °C 19,7 19,7 51,0 69,0 103,4 –
set pressure 39 to 232 °C 12,8 19,7 42,4 69,0 103,4 –
233 to 427 °C 5,5 19,7 28,3 56,9 85,2 103,4
19,7 19,7 19,7 19,7 19,7 19,7
Conventional design
6,9 6,9 11,7 11,7 11,7 11,7
Maximum -268 to -60 °C 19,0 19,0 36,2 36,9 48,3 –
set pressure -59 to -29 °C 19,0 19,0 49,7 69,0 103,4 –
-28 to 38 °C 19,0 19,0 49,7 69,0 103,4 –
39 to 232 °C 12,4 12,4 34,1 67,2 102,4 –
233 to 427 °C 5,5 5,5 29,0 58,3 87,2 –
428 to 538 °C 1,4 1,4 24,1 48,3 72,4 –
19,0 19,0 19,0 19,0 19,0 –
Conventional design
L Outlet pressure limit

6,9 6,9 11,7 11,7 11,7 –
Maximum 233 to 427 °C – – 35,2 69,0 103,4 103,4
set pressure 428 to 538 °C – – 14,8 29,7 44,8 74,5
– – 19,7 19,7 19,7 19,7
Conventional design
– – 11,7 11,7 11,7 11,7
Body material: LCB
Maximum -46 to 38 °C 18,4 18,4 48,0 96,0 144,1 240,1
set pressure 39 to 200 °C 13,8 13,8 42,5 85,1 127,6 212,7
201 to 343 °C 8,4 8,4 36,4 72,8 109,2 182,0
19,7 19,7 19,7 19,7 19,7 19,7
Conventional design
6,9 6,9 11,7 11,7 11,7 11,7
01/46 LWN 480.01-E

Type 526 Orifice M
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
WCB 5262.580X – 5262.581X 5262.582X 5262.583X – –
WC6 – – 5267.584X 5267.585X 5267.586X – –
p [bar]
0 20 40 60 80
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 200 400 600 800 1000 1200
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
CF8M 5264.587X – 5264.588X 5264.589X – – –
p [bar]
0 20 40 60 80
M 1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-100
-200
-300
-400 -200
0 200 400 600 800 1000 1200
p [psig]
01/48 LWN 480.01-E
Type 526 Orifice M
Article numbers
Valve size 4M6 4M6 4M6 4M6 4M6
Flange rating class Inlet x Outlet 150 x 150 300L x 150 300 x 150 600 x 150 900 x 150
Actual Orifice diameter d0 [mm] 60,3 60,3 60,3 60,3 60,3
Actual Orifice area A0 [mm2] 2856 2856 2856 2856 2856
Body material
WCB 1.0619 Art.-No. 5262.580¤ 5262.581¤ 5262.582¤ 5262.583¤
CF8M 1.4408 Art.-No. 5264.587¤ Use 4 M 6 5264.588¤ 5264.589¤ –
WC6 1.7357 Art.-No. – 300 x 150 5267.584¤ 5267.585¤ 5267.586¤
LCB Art.-No. 5263.546¤ 5263.547¤ 5263.548¤ 5263.549¤

Metric Units
Weight 112,1 112,1 122 134,1
[kg] with bellows 118,7 118,7 128,6 134,1
Center to face Inlet a 178 178 178 197
[mm] Outlet b 184 184 203 222
s 48 Use 4 M 6 48 56 72
Height (H4) Standard H max. 852 300 x 150 852 852 871
[mm] Bellows H max. 885 885 885 904
Support brackets A 278 278 278 278
[mm] B 160 160 160 160
C Ø 18 Ø 18 Ø 18 Ø 18
D 260 260 260 280
E 25 25 25 25
US Units
Weight 247,2 247,2 269 295,7
[lbs] with bellows 261,7 261,7 283,6 310,2
Center to face Inlet a 7 7 7 7 3 /4
[inch] Outlet b 7 1/ 7 1/ 8 8 3 /4
4 4
s 1 7/
8 Use 4 M 6 1 7/
8 2 3/
16 2 3 /4 M
Height (H4) Standard H max. 33 17/32 300 x 150 33 17/32 33 17/32 33 17/32
[inch] Bellows H max. 34 27/32 34 27/32 34 27/32 34 27/32
Support brackets A 10 15/16 10 15/16 10 15/16 10 15/16
[inch] B 6 5/16 6 5/16 6 5/16 6 5/16
C Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32
D 10 1/4 10 1/4 10 1/4 11
E 31/ 31/ 31/ 31/
32 32 32 32

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/49

Type 526 Orifice M
Metric Units
Valve size 4M6 4M6 4M6 4M6 4M6
Actual Orifice diameter d0 [mm] 60,3 60,3 60,3 60,3 60,3
Maximum -29 to 38 °C 19,7 51,0 75,9 –
set pressure 39 to 232 °C 12,8 42,4 75,9 –
233 to 427 °C 5,5 Use 4 M 6 28,3 56,9 75,9
19,7 19,7 19,7 19,7
Conventional design
5,5 11,0 11,0 11,0
Maximum -268 to -60 °C 19,0 36,2 41,4 –
set pressure -59 to -29 °C 19,0 49,7 69,0 –
-28 to 38 °C 19,0 49,7 69,0 –
39 to 232 °C 12,4 Use 4 M 6 34,1 67,2 –
233 to 427 °C 5,5 300 x 150 29,0 58,3 –
428 to 538 °C 1,4 24,1 48,3 –
19,0 19,0 19,0 –
Conventional design
5,5 11,0 11,0 –
M Temperature range Pressure range p [bar] S/G/L
Maximum 233 to 427 °C – 35,2 69,0 75,9
set pressure 428 to 538 °C – 14,8 29,7 44,8
Outlet pressure limit Use 4 M 6
– 300 x 150 19,7 19,7 19,7
Conventional design
– 11,0 11,0 11,0
Body material: LCB
Maximum -46 to 38 °C 18,4 48,0 96,0 144,1
set pressure 39 to 200 °C 13,8 42,5 85,1 127,6
201 to 343 °C 8,4 Use 4 M 6 36,4 72,8 109,2
19,7 19,7 19,7 19,7
Conventional design
5,5 11,0 11,0 11,0
01/50 LWN 480.01-E

Type 526 Orifice N
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
WCB 5262.590X – 5262.591X 5262.592X 5262.593X – –
WC6 – – 5267.594X 5267.595X 5267.596X – –
p [bar]
0 10 20 30 40 50 60 70 80
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 200 400 600 800 1000 1200
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
CF8M 5264.597X – 5264.598X 5264.599X – – –
p [bar]
0 10 20 30 40 50 60 70 80
1000
900 400
800
N
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
-100
-200
-300
-400 -200
0 200 400 600 800 1000 1200
p [psig]
01/52 LWN 480.01-E
Type 526 Orifice N
Article numbers
Valve size 4N6 4N6 4N6 4N6 4N6
Actual Orifice diameter d0 [mm] 66 66 66 66 66
Body material
WCB 1.0619 Art.-No. 5262.590¤ 5262.591¤ 5262.592¤ 5262.593¤
CF8M 1.4408 Art.-No. 5264.597¤ Use 4 N 6 5264.598¤ 5264.599¤ –
WC6 1.7357 Art.-No. – 300 x 150 5267.594¤ 5267.595¤ 5267.596¤
LCB Art.-No. 5263.550¤ 5263.551¤ 5263.552¤ 5263.553¤

Metric Units
Weight 128,6 128,6 134,1 134,1
[kg] with bellows 135,2 135,2 140,7 140,7
[mm] Outlet b 210 210 222 222
s 48 Use 4 N 6 48 72 72
Height (H4) Standard H max. 871 300 x 150 871 871 871
[mm] Bellows H max. 904 904 904 904
[mm] B 160 160 160 160
C Ø 18 Ø 18 Ø 18 Ø 18
D 280 280 280 280
E 25 25 25 25
US Units
Weight 283,6 283,6 295,7 295,7
[lbs] with bellows 298,1 298,1 310,2 310,2
Center to face Inlet a 7 3/4 7 3/4 7 3/4 7 3 /4
[inch] Outlet b 8 1/ 8 1/ 8 3/4 8 3 /4
4 4
s 1 7/ 1 7/ 2 3/4 2 3 /4
8 Use 4 N 6 8
Height (H4) Standard H max. 34 9/32 300 x 150 34 9/32 34 9/32 34 9/32
Support brackets A 10 15/16 10 15/16 10 15/16 10 15/16 N
[inch] B 6 5/16 6 5/16 6 5/16 6 5/16
C Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32
D 11 11 11 11
E 31/ 31/ 31/ 31/
32 32 32 32

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/53

Type 526 Orifice N
Metric Units
Valve size 4N6 4N6 4N6 4N6 4N6
Maximum -29 to 38 °C 19,7 51,0 69,0 –
set pressure 39 to 232 °C 12,8 42,4 69,0 –
233 to 427 °C 5,5 Use 4 N 6 28,3 56,9 69,0
19,7 19,7 19,7 19,7
Conventional design
5,5 11,0 11,0 11,0
Maximum -268 to -60 °C 19,0 31,0 34,5 –
set pressure -59 to -29 °C 19,0 49,7 69,0 –
-28 to 38 °C 19,0 49,7 69,0 –
39 to 232 °C 12,4 Use 4 N 6 34,1 67,2 –
233 to 427 °C 5,5 300 x 150 29,0 58,3 –
428 to 538 °C 1,4 24,1 48,3 –
19,0 19,0 19,0 –
Conventional design
5,5 11,0 11,0 –
Maximum 233 to 427 °C – 35,2 69,0 69,0
set pressure 428 to 538 °C – 14,8 29,7 44,8
N Outlet pressure limit
–
Use 4 N 6
19,7 19,7 19,7
Conventional design 300 x 150

– 11,0 11,0 11,0
Body material: LCB
Maximum -46 to 38 °C 18,4 48,0 96,0 144,1
set pressure 39 to 200 °C 13,8 42,5 85,1 127,6
201 to 343 °C 8,4 Use 4 N 6 36,4 72,8 109,2
19,7 19,7 19,7 19,7
Conventional design
5,5 11,0 11,0 11,0
01/54 LWN 480.01-E

Type 526 Orifice P
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
WCB 5262.645X 5262.646X 5262.647X 5262.648X 5262.649X – –
WC6 – – 5267.650X 5267.651X 5267.652X – –
p [bar]
0 10 20 30 40 50 60 70 80
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 200 400 600 800 1000 1200
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
CF8M 5264.653X 5264.654X 5264.655X 5264.656X – – –
p [bar]
0 10 20 30 40 50 60 70 80
1000
900 400
800
700
300
P 600
500
200
400
CF8M
300
T [°C]
T [°F]
100
200
100
0
0
-100
-100
-200
-300
-400 -200
0 200 400 600 800 1000 1200

p [psig]
01/56 LWN 480.01-E
Type 526 Orifice P
Article numbers
Valve size 4P6 4P6 4P6 4P6 4P6
Body material
WCB 1.0619 Art.-No. 5262.645¤ 5262.646¤ 5262.647¤ 5262.648¤ 5262.649¤
CF8M 1.4408 Art.-No. 5264.653¤ 5264.654¤ 5264.655¤ 5264.656¤ –
WC6 1.7357 Art.-No. – – 5267.550¤ 5267.551¤ 5267.552¤
LCB Art.-No. 5263.554¤ 5263.555¤ 5263.556¤ 5263.557¤ 5263.558¤

Metric Units
Weight 107,7 107,7 164 164 164
[kg] with bellows 114,8 114,8 172 172 172
[mm] Outlet b 229 229 254 254 254
s 48 48 62 62 62
Height (H4) Standard H max. 855 855 1079 1079 1079
[mm] Bellows H max. 888 888 1138 1138 1138
[mm] B 160 160 210 210 210
C Ø 18 Ø 18 Ø 18 Ø 18 Ø 18
D 262 262 306 306 306
E 25 25 25 25 25
US Units
Weight 237,5 237,5 361,6 361,6 361,6
[lbs] with bellows 253,1 253,1 379,3 379,3 379,3
Center to face Inlet a 7 1/8 7 1/8 8 7/8 8 7/8 8 7 /8
[inch] Outlet b 9 9 10 10 10
s 1 7/8 1 7/8 2 7/16 2 7/16 2 7/16
Height (H4) Standard H max. 33 21/32 33 21/32 42 1/2 42 1/2 42 1/2
[inch] B 6 5/ 6 5/ 8 9/32 8 9/ 8 9/32
16 16 32
C Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32
D 10 5/16 10 5/16 12 1/16 12 1/16 12 1/16 P
E 31/ 31/ 31/ 31/ 31/
32 32 32 32 32

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/57

Type 526 Orifice P
Metric Units
Valve size 4P6 4P6 4P6 4P6 4P6
Maximum -29 to 38 °C 19,7 19,7 36,2 69,0 –
set pressure 39 to 232 °C 12,8 19,7 36,2 69,0 –
233 to 427 °C 5,5 19,7 28,3 56,9 69,0
19,7 19,7 19,7 19,7 19,7
Conventional design
5,5 5,5 10,3 10,3 10,3
Maximum -268 to -60 °C 12,1 12,1 20,7 33,1 –
set pressure -59 to -29 °C 19,0 19,0 36,2 69,0 –
-28 to 38 °C 19,0 19,0 36,2 69,0 –
39 to 232 °C 12,4 12,4 34,1 67,2 –
233 to 427 °C 5,5 5,5 29,0 58,3 –
428 to 538 °C 1,4 1,4 24,1 48,3 –
19,0 19,0 19,0 19,0 –
Conventional design
5,5 5,5 10,3 10,3 –
Maximum 233 to 427 °C – – 35,2 69,0 69,0
set pressure 428 to 538 °C – – 14,8 29,7 44,8
– – 19,7 19,7 19,7
Conventional design
– – 10,3 10,3 10,3
P
Body material: LCB
Maximum -46 to 38 °C 18,4 18,4 48,0 96,0 144,1
set pressure 39 to 200 °C 13,8 13,8 42,5 85,1 127,6
201 to 343 °C 8,4 8,4 36,4 72,8 109,2
19,7 19,7 19,7 19,7 19,7
Conventional design
5,5 5,5 10,3 10,3 10,3
01/58 LWN 480.01-E

Type 526 Orifice Q
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
WCB 5262.657X – 5262.658X 5262.659X – – –
WC6 – – 5267.660X 5267.661X – – –
p [bar]
0 5 10 15 20 25 30 35 40
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 100 200 300 400 500 600
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
CF8M 5264.662X – 5264.663X 5264.664X – – –
p [bar]
0 5 10 15 20 25 30 35 40
1000
900 400
800
700
300
600
500
200
400
CF8M
Q 300
100
T [°C]
200
T [°F]
100
0
0
-100
-100
-200
-300
-400 -200
0 100 200 300 400 500 600
p [psig]
01/60 LWN 480.01-E
Type 526 Orifice Q
Article numbers
Valve size 6Q8 6Q8 6Q8 6Q8
Flange rating class Inlet x Outlet 150 x 150 300L x 150 300 x 150 600 x 150
Actual Orifice diameter d0 [mm] 105,5 105,5 105,5 105,5
Actual Orifice area A0 [mm2] 8742 8742 8742 8742
Body material
WCB 1.0619 Art.-No. 5262.657¤ 5262.658¤ 5262.659¤
CF8M 1.4408 Art.-No. 5264.662¤ Use 6 Q 8 5264.663¤ 5264.664¤
WC6 1.7357 Art.-No. – 300 x 150 5267.660¤ 5267.661¤
LCB Art.-No. 5263.559¤ 5263.560¤ 5263.561¤

Metric Units
Weight 221 221 221
[kg] with bellows 230 230 230
Center to face Inlet a 240 240 240
[mm] Outlet b 241 241 241
s 68 Use 6 Q 8 68 68
Height (H4) Standard H max. 1120 300 x 150 1120 1120
[mm] Bellows H max. 1200 1200 1200
Support brackets A 370 370 370
[mm] B 210 210 210
C Ø 18 Ø 18 Ø 18
D 346 346 346
E 25 25 25
US Units
Weight 487,3 487,3 487,3
[lbs] with bellows 507,2 507,2 507,2
Center to face Inlet a 9 7/16 9 7/16 9 7/16
[inch] Outlet b 9 1/ 9 1/ 9 1/2
2 2
s 2 11/ 2 11/ 2 11/16
16 Use 6 Q 8 16
Height (H4) Standard H max. 44 1/8 300 x 150 44 1/8 44 1/8
[inch] Bellows H max. 47 1/4 47 1/4 47 1/4
Support brackets A 14 9/16 14 9/16 14 9/16
[inch] B 8 9/32 8 9/32 8 9/32
C Ø 23/32 Ø 23/32 Ø 23/32
D 13 5/8 13 5/8 13 5/8
E 31/ 31/ 31/
32 32 32
¤ Code for lifting device Q

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/61

Type 526 Orifice Q
Metric Units
Valve size 6Q8 6Q8 6Q8 6Q8
Maximum -29 to 38 °C 11,4 20,7 41,4
set pressure 39 to 232 °C 11,4 20,7 41,4
233 to 427 °C 5,5 Use 6 Q 8 20,7 41,4
7,9 7,9 7,9
Conventional design
4,8 7,9 7,9
Maximum -268 to -60 °C 11,4 17,2 20,7
set pressure -59 to -29 °C 11,4 20,7 41,4
-28 to 38 °C 11,4 20,7 41,4
39 to 232 °C 11,4 Use 6 Q 8 20,7 41,4
233 to 427 °C 5,5 300 x 150 20,7 41,4
428 to 538 °C 1,4 20,7 41,4
7,9 7,9 7,9
Conventional design
4,8 7,9 7,9
Maximum 233 to 427 °C – 11,4 41,4
set pressure 428 to 538 °C – 11,4 29,7
Outlet pressure limit Use 6 Q 8
– 300 x 150 7,9 7,9
Conventional design
– 7,9 7,9
Body material: LCB
Q Maximum -46 to 38 °C 18,4 48,0 96,0
set pressure 39 to 200 °C 13,8 42,5 85,1
201 to 343 °C 8,4 36,4 72,8
Use 6 Q 8
7,9 7,9 7,9
Conventional design
4,8 7,9 7,9
01/62 LWN 480.01-E

Type 526 Orifice R
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
WCB 5262.665X 5262.666X 5262.667X 5262.668X – – –
WC6 – 5267.669X – 5267.670X – – –
p [bar]
0 5 10 15 20
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 50 100 150 200 250 300
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
CF8M 5264.671X 5264.672X 5264.673X 5264.674X – – –
p [bar]
0 5 10 15 20
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
R 100
0
0
-100
-100
-200
-300
-400 -200
0 50 100 150 200 250 300
p [psig]
01/64 LWN 480.01-E
Type 526 Orifice R
Article numbers
Valve size 6R8 6R8 6 R 10 6 R 10
Body material
WCB 1.0619 Art.-No. 5262.665¤ 5262.666¤ 5262.667¤ 5262.668¤
CF8M 1.4408 Art.-No. 5264.671¤ 5264.672¤ 5264.673¤ 5264.674¤
WC6 1.7357 Art.-No. – 5267.669¤ – 5267.670¤
LCB Art.-No. 5263.562¤ 5263.563¤ 5263.564¤ 5263.565¤

Metric Units
Weight 221 221 277 277
[kg] with bellows 230 230 288 288
[mm] Outlet b 241 241 241 241
s 68 68 70 70
Height (H4) Standard H max. 1120 1120 1426 1426
[mm] Bellows H max. 1200 1200 1426 1426
[mm] B 210 210 150 150
C Ø 18 Ø 18 Ø 18 Ø 18
D 346 346 460 460
E 25 25 25 25
US Units
Weight 487,3 487,3 610,8 610,8
[lbs] with bellows 507,2 507,2 635 635
Center to face Inlet a 9 7/16 9 7/16 9 7/16 9 7/16
[inch] Outlet b 9 1/2 9 1/2 10 1/2 10 1/2
s 2 11/ 2 11/16 2 3/4 2 3/4
16
Height (H4) Standard H max. 44 1/8 44 1/8 56 1/8 56 1/8
Support brackets A 14 9/16 14 9/16 5 1/8 5 1/8
[inch] B 8 9/32 8 9/32 5 29/32 5 29/32
C Ø 23/32 Ø 23/32 Ø 23/32 Ø 23/32
D 13 5/8 13 5/8 18 1/8 18 1/8
E 31/ 31/ 31/ 31/
32 32 32 32

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5 R
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/65

Type 526 Orifice R
Metric Units
Valve size 6R8 6R8 6 R 10 6 R 10
Maximum -29 to 38 °C 6,9 6,9 15,9 20,7
set pressure 39 to 232 °C 6,9 6,9 15,9 20,7
233 to 427 °C 5,5 6,9 15,9 20,7
4,1 4,1 6,9 6,9
Conventional design
4,1 4,1 6,9 6,9
Maximum -268 to -60 °C 3,8 3,8 10,3 13,8
set pressure -59 to -29 °C 6,9 6,9 15,9 20,7
-28 to 38 °C 6,9 6,9 15,9 20,7
39 to 232 °C 6,9 6,9 15,9 20,7
233 to 427 °C 5,5 5,5 15,9 20,7
428 to 538 °C 1,4 1,4 15,9 20,7
4,1 4,1 6,9 6,9
Conventional design
4,1 4,1 6,9 6,9
Maximum 233 to 427 °C – – 6,9 20,7
set pressure 428 to 538 °C – – 6,9 20,7
– – 4,1 6,9
Conventional design
– – 4,1 6,9
Body material: LCB
Maximum -46 to 38 °C 18,4 18,4 48,0 96,0
set pressure 39 to 200 °C 13,8 13,8 42,5 85,1
201 to 343 °C 8,4 8,4 36,4 72,8
R Outlet pressure limit
4,1 4,1 6,9 6,9
Conventional design
4,1 4,1 6,9 6,9
01/66 LWN 480.01-E

Type 526 Orifice T
Selection chart
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
WCB 5262.675X – 5262.676X – – – –
WC6 – – 5267.677X – – – –
p [bar]
0 5 10 15 20
1000
WC6
900 400
800
700
300
600
500
WCB
200
T [°C]
T [°F]
400
300
100
200
100
0
0
0 50 100 150 200 250 300
p [psig]
150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150 2500 x 300
CF8M 5264.678X – 5264.679X – – – –
p [bar]
0 5 10 15 20
1000
900 400
800
700
300
600
500
200
400
CF8M
300
100
T [°C]
200
T [°F]
100
0
0
-100
T
-100
-200
-300
-400 -200
0 50 100 150 200 250 300
p [psig]
01/68 LWN 480.01-E
Type 526 Orifice T
Article numbers
Valve size 8 T 10 8 T 10 8 T 10
Flange rating class Inlet x Outlet 150 x 150 300L x 150 300 x 150
Actual Orifice diameter d0 [mm] 161,5 161,5 161,5
Actual Orifice area A0 [mm2] 20485 20485 20485
Body material
WCB 1.0619 Art.-No. 5262.675¤ 5262.676¤
CF8M 1.4408 Art.-No. 5264.678¤ Use 8 T 10 5264.679¤
WC6 1.7357 Art.-No. – 300 x 150 5267.677¤
LCB Art.-No. 5263.566¤ 5263.567¤

Metric Units
Weight 287 287
[kg] with bellows 298 298
Center to face Inlet a 276 276
[mm] Outlet b 279 279
s 62 Use 8 T 10 62
Height (H4) Standard H max. 1462 300 x 150 1462
[mm] Bellows H max. 1462 1462
Support brackets A 470 470
[mm] B – –
C Ø 18 Ø 18
D 497 497
E 25 25
US Units
Weight 632,8 632,8
[lbs] with bellows 657,1 657,1
Center to face Inlet a 10 7/8 10 7/8
[inch] Outlet b 11 11
s 2 7/16 Use 8 T 10 2 7/16
Height (H4) Standard H max. 57 9/16 300 x 150 57 9/16
[inch] Bellows H max. 57 9/16 57 9/16
Support brackets A 18 1/2 18 1/2
[inch] B – –
C Ø 23/32 Ø 23/32
D 19 9/16 19 9/16
E 31/ 31/
32 32

WCB 1.0619, WC6 1.7357, LCB 2 3 4 5
CF8M 1.4408 2 – 4 –
LWN 480.01-E 01/69

Type 526 Orifice T
Metric Units
Valve size 8 T 10 8 T 10 8 T 10
Flange rating class Inlet x Outlet 150 x 150 300L x 150 300 x 150
Actual Orifice diameter d0 [mm] 161,5 161,5 161,5
Actual Orifice area A0 [mm2] 20485 20485 20485
Maximum -29 to 38 °C 4,5 20,7
set pressure 39 to 232 °C 4,5 20,7
233 to 427 °C 4,5 Use 8 T 10 20,7
2,1 6,9
Conventional design
2,1 6,9
Maximum -268 to -60 °C 3,4 4,5
set pressure -59 to -29 °C 4,5 8,3
-28 to 38 °C 4,5 8,3
39 to 232 °C 4,5 Use 8 T 10 8,3
233 to 427 °C 4,5 300 x 150 8,3
428 to 538 °C 1,4 8,3
2,1 4,1
Conventional design
2,1 4,1
Maximum 233 to 427 °C – 20,7
set pressure 428 to 538 °C – 15,5
Outlet pressure limit Use 8 T 10
– 300 x 150 6,9
Conventional design
– 6,9
Body material: LCB
Maximum -46 to 38 °C 18,4 48,0
set pressure 39 to 200 °C 13,8 42,5
201 to 343 °C 8,4 36,4
Use 8 T 10
2,1 6,9
Conventional design
2,1 6,9
T
01/70 LWN 480.01-E

Type 526
Flange drillings
Standard Flange drillings according to DIN EN 1092 (up to PN 100) and DIN 2501 (from PN 160 up)
Type 526
Inlet Outlet Material Inlet Outlet

Orifice NPS standard NPS WCB/ PN PN PN PN PN PN PN PN PN PN PN PN PN PN
[inch] flange class [inch] LCB WC6 CF8M
10/16 25 40 63 100 160 250 320 400 10 16 25 40 63
1" 300 2" H45 H46 H47 – – – – – – H50 H51 H52 H15 –
1" 600 2" – – – H10 H17 – – – – H50 H51 H52 H15 –
D 1 1/2" 1500 2" – – – – – H11 H12 – – H50 H51 H52 H15 –
1 1/2" 2500 3" – – – – – – H12 H13 – H50 H51 H52 H15 H16
1" 300 2" H45 H46 H47 – – – – – – H50 H51 H52 H15 –
1" 600 2" – – – H10 H17 – – – – H50 H51 H52 H15 –
E 1 1/2" 1500 2" – – – – – H11 H12 – – H50 H51 H52 H15 –
1 1/2" 2500 3" – – – – – – H12 H13 – H50 H51 H52 H15 H16
1 1/2" 300L 2" – H45 – – – – – – – – H50 H51 H52 H15 –
1 1/2" 300 2" – H46 H47 – – – – – – H50 H51 H52 H15 –
F 1 1/2" 1500 3" – – – H10 H17 H11 H12 – – H50 H51 H52 H15 H16
1 1/2" 2500 3" – – – – – – H12 H13 – H50 H51 H52 H15 H16
1 1/2" 300L 3" – H45 – – – – – – – – H50 H51 H52 H15 –
1 1/2" 300 3" – H46 H47 H10 – – – – – H50 H51 H52 H15 –
1 1/2" 600 3" – – – H10 H17 H11 – – – H50 H51 H52 H15 –
G 1 1/2" 900 3" – – – – H17 H11 – – – H50 H51 H52 H15 H16
2" 1500 3" – – – – – – H12 H13 – H50 H51 H52 H15 H16
2" 2500 3" – – – – – – – – H14 H50 H51 H52 H15 H16
1 1/2" 300L 3" – H45 H46 H47 – – – – – – H50 H51 H52 H15 –
2" 300 3" – – H47 H10 – – – – – H50 H51 H52 H15 –
2" 600 3" – – – – H47 H10 – – – – – H50 H51 H52 H15 –
H 2" 600 3" – – – H47 H10 – – – – – H50 H51 H52 H15 H16
2" 900 3" – – – – H17 H11 – – – H50 H51 H52 H15 H16
2" 1500 3" – – – – – H11 H12 – – H50 H51 H52 H15 H16
2" 300L 3" – H45 H46 H47 H10 – – – – – H50 H51 H52 H15 –
3" 600 4" – – H47 H10 – – – – – H50 H51 H52 H15 –
J 3" 900 4" – – – – H17 H11 – – – H50 H51 H52 H15 H16
3" 1500 4" – – – – – H11 H12 – – H50 H51 H52 H15 H16
3" 300 4" H45 H46 H47 H10 – – – – – H50 H51 H52 H15 –
3" 600 4" – – – H47 H10 – – – – – H50 H51 H52 H15 –
K 3" 900 6" – – – – – H10 H17 H11 H12 – – H50 H51 – – –
3" 900 6" – – – – H10 H17 H11 H12 – – H50 H51 H52 H15 –
3" 1500 6" – – – H10 H17 H11 H12 – – H50 H51 H52 H15 –
3" 300L 4" – H45 H46 H47 H10 – – – – – H50 H51 H52 H15 –
4" 300 6" H45 H46 H47 H10 – – – – – H50 H51 – – –
L 4" 600 6" – – – H10 H17 H11 – – – H50 H51 – – –
4" 900 6" – – – – H17 H11 – – – H50 H51 – – –
4" 1500 6" – – – – – – – H12 – – H50 H51 – – –
4" 300 6" H45 H46 H47 H10 – – – – – H50 H51 – – –
M 4" 600 6" – – – H10 H17 H11 – – – H50 H51 – – –
4" 900 6" – – – – – H17 H11 H12 – – H50 H51 – – –
4" 300 6" H45 H46 H47 H10 – – – – – H50 H51 – – –
N 4" 600 6" – – – – H17 H11 – – – H50 H51 – – –
4" 900 6" – – – – – – – H12 – – H50 H51 – – –
4" 300L 6" – H45 H46 H47 – – – – – – H50 H51 – – –
4" 300 6" – H46 H47 – – – – – – H50 H51 – – –
P 4" 600 6" – – – H10 H17 – – – – H50 H51 – – –
4" 900 6" – – – – – – H11 H12 – – H50 H51 – – –
6" 300 8" H45 H46 H47 – – – – – – H50 H51 H52 – –
Q 6" 600 8" – – – H10 H17 H11 – – – H50 H51 H52 – –
6" 300L 8" H45 H46 H47 H10 – – – – – H50 H51 H52 – –
R 6" 300 10" – – – H47 H10 – – – – – H50 H51 – – –
6" 600 10" – – H47 H10 – – – – – H50 H51 – – –
T 8" 300 10" – H46 H47 – – – – – – H50 H51 – – –
Note: Flange drillings and facings meet always the requirements of mentioned flange standards. Flange thickness and outer diameter may vary from flange standard.
For signs and symbols refer to page 00/05
01/72 LWN 480.01-E
Type 526
Flange facings
Indication Standard Inlet Outlet Remark
Type 526
General
Flange undrilled – H38 H39
Linde-V-Nut, Form V48 Linde Standard 420-08 J07 J08 Groove: Rz 16
Linde-V-Nut, Form V48A LWN 313.36 J05 J06 Groove: Rz 4, e.g. with hydrogen
Lens seal form L DIN 2696

J11 J12
(without sealing lens) LWN 313.35
Acc. to DIN EN
Flange facing Inlet Outlet Remark
DIN EN 1092 (new) DIN 2526 PN 10 – PN 63 – PN 10 – Rz-data according to
PN 63
(see also LWN 313.40) (old) PN 40 PN 400 PN 40 DIN EN 1092 in µm
Type C – –
Type B1 * * Facing: Rz = 12,5 – 50
Raised face Type D – L38
* *
Type B2 Type E – L38 Facing: Rz = 3,2 – 12,5
Tongue face C1) Tongue face F L56 H92
Groove face D1) Groove face N L55 H91
Male face E Male face V13 I90 H98
Female face F Female face R13 I91 H99
O-ring male face G Male face V14 I93 J02
O-ring female face H Female face R14 I92 J04
Acc. to ASME B16.5
Smooth finish2) Serrated finish RTJ-groove
Body
Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet
material
Option code Option code CL300 CL600 CL900 CL1500 CL2500 CL150 CL300
all all all L52 L53 L58 H63
* *
1) According to DIN EN 1092 groove depths and tongue heights increased compared to the formerly valid DIN (refer to LWN 313.40).
LESER manufactures the groove at flanged valves by milling. If a customer demands a turned surface in the soil of the groove according to DIN 2512 and/or
DIN EN 1092-1 an additional option code is necessary: “S01: bottom of the groove drilled”. Groove and tongue for PN160 flanges refer to DIN 2512/LWN 313.32.
2) Smooth finish is not defined in the effective standards. For LESER‘s definition for smooth finish see page 00/05.
For signs and symbols refer to page 00/05

Note: Flange drillings and facings meet always the requirements of mentioned flange standards. Flange thickness and outer diameter may vary from flange standard.
Stud-bolts length for flange connection inlet and outlet
All LESER safety valves Type 526 need at the inlet side longer stud-bolts for the flange connections as stated in ASME B16.5, due to the full nozzle design.
Furthermore, due to the actual castings the stud bolts at the outlet can differ from ASME B16.5 as well.
LESER state the stud-bolt length in LWN 001.29-E. For calculation of stud-bolts length the measure “s” stated on page 01/10-01/13 can be used.
Connection acc. to API Standard 526 - 1984

Valve size Flange rating class
Orifice Option code
Inlet Outlet Inlet
E 1 1/2" 3" drilled 2 1/2" 2500 S01

F 1 1/ 3" drilled 2 1/2"
2" 900 S01
G 1 1/2" 3" drilled 2 1/2" 150 – 900 S01
K 2 1/2" 6" 900 – 1500 S01
LWN 480.01-E 01/73

Type 526
How to order Type 526 with outlet flange rating class 300
For customer specifications requiring a flange rating class 300 at the outlet LESER provides Type 526 with outlet flange rating class 300.
For ordering please state the article numbers and option codes which are listed in the table.
Outlet with flange class 300

Type 526
Valve size
Inlet x Outlet Body 300 x 300 600 x 300
Orifice
Center to face material
axb Art.-No. Option code Art.-No. Option code
WCB 1.0619 4582.610X H65, H80, J18, J51 4582.610X H67, H80, J18, J51
1" x 2"
CF10M 1.4581 4584.620X H65, H80, J18, J51 4584.620X H67, H80, J18, J51
D WC6 1.7357 4587.630X H65, H80, J18, J51 4587.630X H67, H80, J18, J51
4 5/7" x 5 1/8"
LCB – – – –
WCB 1.0619 5262.004X H65, H80 5262.004X H67, H80
1 1/2" x 2"
CF8M 1.4408 5264.013X H65, H80 5264.013X H67, H80
D WC6 1.7357 5267.008X H65, H80 5267.008X H67, H80
4 1/8" x 5 1/2"
LCB 5263.503X H65, H80 5263.503X H67, H80
WCB 1.0619 4582.610X H65, H80, J18, J51 4582.610X H67, H80, J18, J51
1" x 2"
CF10M 1.4581 4584.620X H65, H80, J18, J51 4584.620X H67, H80, J18, J51
E WC6 1.7357 4587.630X H65, H80, J18, J51 4587.630X H67, H80, J18, J51
4 5/7" x 5 1/8"
LCB – – – –
WCB 1.0619 5262.018X H65, H80 5262.018X H67, H80
1 1/2" x 2"
CF8M 1.4408 5264.027X H65, H80 5264.027X H67, H80
E WC6 1.7357 5267.022X H65, H80 5267.022X H67, H80
4 1/8" x 5 1/2"
LCB 5263.508X H65, H80 5263.508X H67, H80
WCB 1.0619 5262.031X H65, H80 5262.032X H67, H80
1 1/2" x 2"
CF8M 1.4408 5264.041X H65, H80 5264.041X H67, H80
F WC6 1.7357 5267.035X H65, H80 5267.036X H67, H80
4 7/8" x 6"
LCB 5263.512X H65, H80 5263.512X H67, H80
WCB 1.0619 5262.049X H65, H80 5262.049X H67, H80
1 1/2" x 3"
CF8M 1.4408 5264.114X H65, H80 5264.114X H67, H80
G WC6 1.7357 5267.054X H65, H80 5267.054X H67, H80
4 7/8" x 6 1/2"
LCB 5263.520X H65, H80 5263.520X H67, H80
WCB 1.0619 5262.146X H65, H80 5262.146X H67, H80
2" x 3"
CF8M 1.4408 5264.156X H65, H80 5264.156X H67, H80
H WC6 1.7357 5267.150X H65, H80 5267.150X H67, H80
6 1/16" x 6 3/8"
LCB 5263.527X H65, H80 5263.527X H67, H80
WCB 1.0619 5262.166X H65, H80 5262.166X H67, H80
3" x 4"
CF8M 1.4408 5264.200X H65, H80 5264.200X H67, H80
J WC6 1.7357 5267.170X H65, H80 5267.170X H67, H80
7 1/4" x 7 1/8"
LCB 5263.533X H65, H80 5263.533X H67, H80
WCB 1.0619 5262.204X H65, H80 5262.204X H67, H80
3" x 4"
CF8M 1.4408 5264.213X H65, H80 5264.213X H67, H80
K WC6 1.7357 5267.209X H65, H80 5267.209X H67, H80
7 13/16" x 7 1/8"
LCB 5263.537X H65, H80 5263.537X H67, H80
WCB 1.0619 5262.235X H65, H80 5262.235X H67, H80
4" x 6"
CF8M 1.4408 5264.245X H65, H80 5264.245X H67, H80
L WC6 1.7357 5267.239X H65, H80 5267.239X H67, H80
7 3/4" x 8 1/2"
LCB 5263.543X H65, H80 5263.543X H67, H80
WCB 1.0619 5262.582X H65, H80 5262.582X H67, H80
4" x 6"
CF8M 1.4408 5264.589X H65, H80 5264.589X H67, H80
M WC6 1.7357 5267.585X H65, H80 5267.585X H67, H80
7 3/4" x 8 1/2"
LCB 5263.548X H65, H80 5263.548X H67, H80
WCB 1.0619 5262.592X H65, H80 5262.592X H67, H80
4" x 6"
CF8M 1.4408 5264.599X H65, H80 5264.599X H67, H80
N WC6 1.7357 5267.595X H65, H80 5267.595X H67, H80
7 3/4" x 8 1/2"
LCB 5263.552X H65, H80 5263.552X H67, H80
4" x 6" WCB 1.0619 5262.647X S01 5262.647X S01
Welded outlet flange CF8M 1.4408 5264.655X S01 5264.655X S01
P WC6 1.7357 5267.650X S01 5267.650X S01
8 7/8" x 11 5/8"
LCB 5263.556X S01 5263.556X S01
6" x 8" WCB 1.0619 5262.658X S01 5262.658X S01
Q WC6 1.7357 5267.660X S01 5267.660X S01
9 7/16" x 12"
LCB 5263.560X S01 5263.560X S01
6" x 10" WCB 1.0619 5262.667X S01 5262.667X S01
R WC6 1.7357 5267.670X S01 5267.670X S01
9 7/16" x 13 1/5"
LCB 5263.564X S01 5263.564X S01
8" x 10" WCB 1.0619 5262.676X S01
Welded outlet flange CF8M 1.4408 5264.679X S01
T WC6 1.7357 5267.677X S01
10 7/8" x 13 1/5"
LCB 5263.567X S01
01/74 LWN 480.01-E

Type 526
900 x 300 1500 x 300 2500 x 300
Orifice
Art.-No. Option code Art.-No. Option code Art.-No. Option code
E
Outlet flange rating class 300 is
standard flange rating class
acc. to API standard 526
E
5262.147X
5264.157X
H 5267.151X
Class 1500 x 300
5263.528X
5262.166X H68, H80
5264.200X H68, H80
J 5267.170X H68, H80
5263.533X H68, H80
5262.204X H68, H80
5264.213X H68, H80
K 5267.209X H68, H80
5263.537X H68, H80
Welded outlet flange rating class 300

L available on request.
M
Design details
Orifice D and E: 1 D 2 and 1 E 2 class 300 x 300 and 600 x 300 are realised
N by a modification of Type 458 DN 25 / 1".
Orifice L: 4 L 6 class 900 x 300 and 1500 x 300 can be realised

by a welded outlet flange on request.
P Orifice M-P: 4 M 6, 4 N 6 and 4 P 6 class 900 x 300 can
be realised by a welded outlet flange on request.
Orifice P-T: 4 P 6 up to 8 T 10 are realised by a welded outlet flange class 300.

Q
Center to face dimensions:
The center to face dimensions a and b for LESER Type 526 with outlet flange rating class 300
are not specified in API Standard 526. The actual dimensions are listed in the table. They differ
from the dimensions which are specified in API 526 for safety valves with outlet flange class
R 150. Exceptions are the grey marked safety valves.
Grey marked safety valves

The center to face dimensions are equal to API standard 526 with outlet flange rating class 150.
T
LWN 480.01-E 01/75

Type 526
Spare parts recommendations
The following recommendations for spare parts should be taken as a guideline.
Type 526
The actual needs for the replacement of parts depend on various conditions like
• operating temperature • fluid

• set pressure and operating pressure • environment
• material selection
These operating conditions have a significant influence on the product life of safety relief valves.
Item Component Commision / start-up Two year operating Fife year operating
60 Gasket 1 per valve 1 per valve 2 per valve

7 Disc 1 per 5 valves 2 per 5 valves 1 per valve
61 Ball 1 per 5 valves 2 per 5 valves 1 per valve
57 Ball 1 set per 5 valves1) 2 sets per 5 valves1) 1 set per valve1)
5 Nozzle 0 0 1 per 5 valves
15 Stainless steel bellows 1 per 5 valves 2 per 5 valves 1 per valve
12 Spindle 0 0 1 per 5 valves
1 per valve: per each supplied safety valve one piece shall be provided
1 per 5 valves: one spare part per 5 supplied equal safety valves
1) 1 set = 15 pieces
Rework of seat and disc

Minor damages on the seating surfaces of nozzle and disc can be repaired
by lapping or by machining and successive lapping. For this purpose LESER
offers lapping stamps as well as lapping paste.
Lapping stamps
Orifice Designation and size Material-No.
D+E Lapping stamp no. 3, d018 / orifice D + E 445.1359.0000

F+G Lapping stamp no. 4, d0 23 / orifice F + G 445.1459.0000
H Lapping stamp no. 5, d0 29 / orifice H 445.1559.0000
J Lapping stamp no. 6, d0 37 / orifice J 445.1659.0000
K Lapping stamp no. 7, d0 46 / orifice K 445.1759.0000
L+M Lapping stamp no. 8, d0 60 / orifice L + M 445.1859.0000
N Lapping stamp no. 9, d0 74 / orifice N 445.1959.0000
P Lapping stamp no. 10, d0 92 / orifice P 445.2059.0000
Q+R Lapping stamp no. 12, d0 125 / orifice Q + R 445.2259.0000
T Lapping stamp no. 13, d0 165 / orifice T 445.2359.0000
Lapping paste
Lapping paste Supplying-lot Designation Application
Tetraboron paste
Tubes to 100 g net F grinding-paste 800 Primary lapping
“WL” F 800
Tetraboron paste
Tubes to 100 g net F grinding-paste 1200 Finishing
“WL” F 1200
LWN 480.01-E 01/83

Type 526
Approvals
Type 526
Approvals
Orifice D E–T
Europe Coefficient of discharge Kdr
DIN EN ISO 4126-1 Approval No. 07 202 1111Z0012/2/26
S/G 0,455 0,801
L 0,343 0,579
Germany Coefficient of discharge αw
AD 2000-Merkblatt A2 Approval No. TÜV SV 1082
S/G 0,455 0,801
L 0,343 0,579
United States Coefficient of discharge K
ASME Sec. VIII Approval No. M37246 M37224
Rated slope
S/G
acc. to ASME VIII, Div. 1 UG-131 (d) (2)
0,801
G: 1,99 SCFM/psia
S: 5,59 PPH/psia
Approval No. M37257 M37235
Rated slope
L acc. to ASME VIII, Div. 1 UG-131 (d) (2) 0,579
3,11 GPM/√psid
Canada Coefficient of discharge K
Canada: CRN Approval No. OG0873.9C
Rated slope
S/G
acc. to ASME VIII, Div. 1 UG-131 (d) (2)
0,801
G: 1,99 SCFM/psia
S: 5,59 PPH/psia
Rated slope
L acc. to ASME VIII, Div. 1 UG-131 (d) (2) 0,579
3,11 GPM/√psid
China Coefficient of discharge αw
CSBQTS Approval No.
S/G 0,455 0,801
L 0,343 0,579
Russia Coefficient of discharge αw
GGTN/ Approval No. PPC 00-18458
GOSGOTECHNADZOR S/G 0,455 0,801
GOST R
L 0,343 0,579
Classification societies Homepage
Bureau Veritas BV www.bureauveritas.com The valid certification number is changed with
Det Norske Veritas DNV www.dnv.com every renewal.
Germanischer Lloyd GL www.gl-group.com
A sample certificate including the valid certification
Lloyd‘ s register EMEA LREMEA www.lr.org number can be taken from the homepage of the
Registro Italiano Navale RINA www.rina.org classification societies.
LWN 480.01-E 01/85

Type 526
Capacities – Steam
Capacities for saturated steam according to AD 2000-Merkblatt A2, based on set pressure plus 10 % overpressure.
Type 526
Metric Units AD 2000-Merkblatt A2 [kg/h]

Orifice D E F G H J K L M N P Q R T
Act. Orifice dia. d0 [mm] 14 14 18 22,5 28,3 36 43 53,5 60,3 66 80 105,5 126,5 161,5
Act. Orifice area A0 [mm2] 154 154 254 398 629 1018 1452 2248 2856 3421 5027 8742 12568 20485
LEOS/G*) [inch2] 0,111 0,196 0,324 0,506 0,801 1,296 1,849 2,863 3,637 4,357 6,401 11,132 16,004 26,085
Set pressure [bar] Capacities [kg/h]
0,2 19 54 89 139 221 357 509 788 1001 1199 1762 3065 4372 7182
0,5 42 90 149 232 367 595 848 1313 1668 1999 2937 5107 7285 11968
1 71 134 221 345 546 883 1260 1951 2479 2969 4363 7587 10823 17780
2 120 217 359 561 888 1437 2050 3174 4032 4830 7096 12341 17603 28920
3 166 296 489 764 1209 1956 2791 4320 5488 6575 9660 16799 23962 39366
4 208 369 610 953 1507 2439 3480 5387 6843 8198 12045 20948 29879 49088
5 248 442 730 1141 1805 2920 4166 6449 8193 9815 14420 25078 35770 58766
6 289 514 850 1328 2101 3399 4850 7508 9537 11426 16787 29194 41642 68413
7 329 585 967 1511 2390 3867 5517 8540 10849 12997 19096 33210 47371 77824
8 369 657 1086 1697 2684 4343 6196 9592 12185 14597 21447 37299 53202 87404
9 410 729 1205 1882 2978 4818 6874 10642 13519 16195 23795 41382 59026 96973
10 450 801 1323 2068 3271 5293 7552 11691 14852 17792 26141 45461 64845 106532
12 531 872 1561 2439 3858 6243 8907 13788 17515 20983 30829 53615 76475 125639
14 610 944 1793 2802 4432 7172 10233 15841 20123 24107 35419 61598 87862 144347
16 691 1085 2030 3172 5018 8120 11584 17933 22781 27291 40097 69733 99467 163411
18 771 1228 2267 3542 5604 9068 12938 20027 25442 30479 44781 77879 111085 182499
20 852 1371 2505 3913 6191 10018 14293 22125 28107 33672 49473 86038 122723 201618
22 931 1515 2735 4273 6760 10940 15608 24161 30693 36770 54024 93952
24 1012 1654 2973 4645 7349 11891 16965 26262 33363 39968 58723 102125
26 1093 1798 3211 5018 7938 12845 18327 28369 36039 43175 63434 110318
28 1174 1943 3451 5392 8529 13802 19692 30483 38724 46391 68159 118536
30 1256 2087 3691 5766 9122 14762 21061 32602 41417 49617 72899 126779
32 1338 2233 3931 6143 9718 15725 22435 34729 44118 52853 77654 135048
34 1416 2378 4161 6502 10286 16644 23747 36760 46698 55944 82195 142945
36 1498 2517 4403 6879 10883 17611 25126 38895 49411 59194 86970 151250
38 1581 2663 4646 7259 11483 18582 26511 41039 52134 62457 91764 159586
40 1664 2810 4889 7639 12085 19557 27901 43191 54868 65732 96576 167955
50 2083 2958 6123 9567 15134 24490 34940 54088 68711 82315 120941
60 2506 3704 7364 11506 18203 29456 42025 65055 82643 99006 145463
70 2945 4455 8656 13525 21396 34624 49398 76467 97141
80 3388 5236 9957 15558 24613 39828 56823 87962
90 3854 6023 11326 17697 27997 45305 64636 100056
100 4324 6852 12708 19856 31413 50832 72522 112264
120 5349 7688 15720 24562 38858 62880 89710
140 6505 9510 19117 29870 47255 76468 109096
160 7842 11565 23045 36008 56965 92180
180 9527 13941 27996 43744 69203 111985
200 11793 16936 34657 54151
*) LEOS/G = LESER Effective Orifice steam/gas please refer to page 00/07

01/86 LWN 480.01-E

Type 526
Capacities – Air
Capacities for air according to AD 2000-Merkblatt A2, based on set pressure plus 10 % overpressure at 0 °C and 1013 mbar.
Type 526
Metric Units AD 2000-Merkblatt A2 [mn3/h]

LEOS/G*) [inch2] 0,111 0,196 0,324 0,506 0,801 1,296 1,849 2,863 3,637 4,357 6,401 11,132 16,004 26,085
Set pressure [bar] Capacities [mn3 /h]
0,2 22 63 103 161 255 413 590 913 1159 1389 2041 3549 5062 8317
0,5 50 106 175 273 432 16,4 23,5 36,3 46,1 55,3 81,2 5999 8557 14058
1 84 159 263 411 651 23,3 33,2 51,4 65,3 78,2 5200 9044 12900 21192
2 145 262 434 678 1072 31,5 44,9 69,6 88,4 5833 8570 14905 21260 34927
3 203 361 597 934 1477 44,5 63,5 98,4 6705 8033 11802 20525 29277 48098
4 255 454 750 1172 1854 54,5 77,8 6625 8417 10083 14814 25764 36749 60374
5 307 546 902 1410 2231 63 89,9 7973 10128 12133 17827 31002 44221 72650
6 359 638 1055 1648 2608 70,4 6020 9320 11839 14183 20839 36241 51693 84925
7 411 730 1207 1887 2985 77,1 6891 10667 13551 16234 23851 41479 59165 97201
8 463 823 1360 2125 3362 83,3 7761 12014 15262 18284 26863 46718 66637 109477
9 515 915 1512 2363 3739 89,1 8631 13361 16973 20334 29875 51956 74109 121752
10 567 1007 1665 2601 4116 94,5 9501 14708 18685 22384 32887 57195 81581 134028
12 670 1099 1970 3078 4869 99,6 11242 17402 22107 26484 38912 67672 96526 158579
14 774 1192 2275 3555 5623 9100 12982 20097 25530 30585 44936 78149 111470 183131
16 878 1376 2580 4031 6377 10320 14723 22791 28953 34685 50961 88626 126414 207682
18 982 1561 2885 4508 7131 11539 16463 25485 32375 38785 56985 99102 141358 232233
20 1085 1745 3190 4984 7885 12759 18204 28179 35798 42886 63009 109579 156302 256785
22 1189 1930 3495 5461 8639 13979 19944 30874 39221 46986 69034 120056
24 1293 2114 3800 5937 9393 15199 21685 33568 42643 51086 75058 130533
26 1397 2299 4105 6414 10147 16419 23425 36262 46066 55187 81082 141010
28 1501 2483 4410 6890 10900 17639 25166 38956 49489 59287 87107 151487
30 1604 2668 4715 7367 11654 18859 26906 41651 52911 63387 93131 161964
32 1708 2852 5020 7843 12408 20079 28647 44345 56334 67488 99155 172441
34 1812 3037 5325 8320 13162 21299 30387 47039 59757 71588 105180 182918
36 1916 3221 5630 8796 13916 22519 32128 49733 63179 75688 111204 193395
38 2019 3406 5935 9273 14670 23739 33868 52428 66602 79789 117228 203872
40 2123 3590 6240 9749 15424 24959 35608 55122 70025 83889 123253 214349
50 2642 3775 7765 12132 19193 31058 44311 68593 87138 104390 153374
60 3161 4697 9289 14515 22963 37158 53013 82064 104251 124892 183496
70 3680 5620 10814 16898 26732 43258 61716 95536 121365
80 4199 6542 12339 19280 30501 49357 70418 109007
90 4718 7465 13864 21663 34271 55457 79120 122478
100 5237 8387 15389 24046 38040 61557 87823 135949
120 6274 9309 18439 28811 45579 73756 105227
140 7312 11154 21489 33576 53118 85955 122632
160 8350 12999 24539 38342 60657 98155
180 9388 14844 27588 43107 68195 110354
200 10426 16689 30638 47872
220 11463 18534 33688 52638
240 12501 20379 36738 57403
260 13539 22224 39788
280 14577 24069 42838
300 15614 25914 45887
350 18209 27759
400 20803 32371
*) LEOS/G = LESER Effective Orifice steam/gas please refer to page 00/07

01/88 LWN 480.01-E

Type 526
Capacities – Water
Capacities for water according to AD 2000-Merkblatt A2, based on set pressure plus 10 % overpressure at 20 °C (68 °F).
Type 526
Metric Units AD 2000-Merkblatt A2 [103kg/h]

LEOL*) [inch2] 0,126 0,213 0,351 0,549 0,868 1,405 2,005 3,104 3,943 4,724 6,940 12,070 17,353 28,283
Set pressure [bar] Capacities [103kg/h]
0,2 1,37 2,49 4,11 6,42 10,2 16,4 23,5 36,3 46,1 55,3 81,2 141 201 331
0,5 1,94 3,52 5,81 9,09 14,4 23,3 33,2 51,4 65,3 78,2 115 200 285 468
1 2,63 4,76 7,87 12,3 19,5 31,5 44,9 69,6 88,4 106 156 270 386 634
2 3,72 6,74 11,1 17,4 27,5 44,5 63,5 98,4 125 150 220 383 546 896
3 4,55 8,25 13,6 21,3 33,7 54,5 77,8 120 153 183 269 468 668 1098
4 5,26 9,53 15,7 24,6 38,9 63 89,9 139 177 212 311 541 772 1268
5 5,88 10,7 17,6 27,5 43,5 70,4 100 156 198 237 348 605 863 1417
6 6,44 11,7 19,3 30,1 47,7 77,1 110 170 216 259 381 663 945 1553
7 6,95 12,6 20,8 32,5 51,5 83,3 119 184 234 280 411 716 1021 1677
8 7,43 13,5 22,3 34,8 55,0 89,1 127 197 250 299 440 765 1091 1793
9 7,88 14,3 23,6 36,9 58,4 94,5 135 209 265 318 467 811 1157 1901
10 8,31 15,1 24,9 38,9 61,5 99,6 142 220 279 335 492 855 1220 2004
12 9,10 15,8 27,3 42,6 67,4 109 156 241 306 367 539 937 1336 2196
14 9,83 16,5 29,5 46,0 72,8 118 168 260 331 396 582 1012 1444 2372
16 10,5 17,8 31,5 49,2 77,8 126 180 278 353 423 622 1082 1543 2535
18 11,1 19,1 33,4 52,2 82,6 134 191 295 375 449 660 1148 1637 2689
20 11,8 20,2 35,2 55,0 87,0 141 201 311 395 473 696 1210 1725 2835
22 12,3 21,3 36,9 57,7 91,3 148 211 326 414 496 729 1269
24 12,9 22,3 38,6 60,3 95,3 154 220 341 433 519 762 1325
26 13,4 23,3 40,1 62,7 99,2 161 229 355 451 540 793 1379
28 13,9 24,3 41,7 65,1 103 167 238 368 468 560 823 1431
30 14,4 25,2 43,1 67,4 107 172 246 381 484 580 852 1481
32 14,9 26,1 44,5 69,6 110 178 254 393 500 599 880 1530
34 15,3 26,9 45,9 71,7 113 184 262 406 515 617 907 1577
36 15,8 27,8 47,2 73,8 117 189 270 417 530 635 933 1623
38 16,2 28,6 48,5 75,8 120 194 277 429 545 653 959 1667
40 16,6 29,4 49,8 77,8 123 199 284 440 559 669 984 1711
50 18,6 30,1 55,7 87,0 138 223 318 492 625 748 1100
60 20,4 33,7 61,0 95,3 151 244 348 539 684 820 1205
70 22,0 36,9 65,9 103 163 263 376 582 739
80 23,5 39,8 70,4 110 174 282 402 622
90 24,9 42,6 74,7 117 185 299 426 660
100 26,3 45,2 78,7 123 195 315 449 696
120 28,8 47,6 86,2 135 213 345 492
140 31,1 52,2 93,2 146 230 373 532
160 33,2 56,4 99,6 156 246 398
180 35,3 60,2 106 165 261 423
200 37,2 63,9 111 174
220 39,0 67,4 117 182
240 40,7 70,6 122 191
260 42,4 73,8 127
280 44,0 76,8 132
300 45,5 79,7 136
350 49,2 82,5
400 52,6 89,1
*) LEOL = LESER Effective Orifice liquids please refer to page 00/08

01/90 LWN 480.01-E

Type 526
Available Options For further information refer to
“Accessories and Options”, page 99/01
Type 526
Butt-weld connection Heating jacket O-ring disc Disc with inserted sealing plate
J20: FFKM “C” J44: PTFE-FDA “A”
J21: CR “K” J48: PCTFE “G”
J22: EPDM “F” J49: SP “T”
J23: FKM “L”
Open bonnet Stainless steel bellows Conversion kit for Screwed cap H2
See Art.-No. J68: Open bonnet stainless steel bellows H2
J78: Closed bonnet See Art.-No. page 01/79
J88: High temperature equipment
Plain lever H3 Packed lever H4 Bolted cap H1 Bolted lifting device H6

H3 H4 H1 H6
Test gag Lift indicator O-ring-damper H2 O-ring-damper H4

J69: H4 J39: Adaptor for lift indicator H4 J65 J66
J70: H2 J93: Lift indicator
01/84 LWN 480.01-E

Metal seat – Nozzle item 5 and disc subassembly item 7
The LESER metal seats (disc and nozzle) are lapped to optical flatness to ensure a tight seal.
LESER safety relief valves are supplied with standard leak tightness according to API 527.
Improved tightness is available on request.
Type 526 7.1
7.5
5 7.2
Stellited sealing surfaces

The sealing surfaces of stainless steel disc and nozzle can be stellited by build-up welding. Stellite is a cobalt-chromium based,
non-ferrous alloy with increased hardness, corrosion resistance and wear resistance up to high temperatures.
LESER recommends stellited sealing surfaces for Type 526 valves (seat and disc 1.4404 / 316L) in the following cases:
- high pressure applications, due to the high stress of the sealing surfaces
- high temperature applications to avoid a permanent deformation of the sealing surfaces,
due to the material properties of the seat and disc
- applications with abrasive fluids to increase the wear resistance of the sealing surfaces
The stellited sealing surfaces of disc and nozzle are standard for high pressure and high temperature designs;
see table materials page 99/07.
Type 526
7.1
Materials for disc and nozzle see page 99/07.
Hardness metal seat

Material Hardness of sealing surfaces
Values from standards or Average value

EN ASME
manufacturers specification LESER stock
EN 10088-3, 1.4122 hardened Hardened stainless steel ≥ 40 HRC LWN 325.01 Harding procedure 42 – 46 HRC
EN 10272, 1.4404 SA 479 316L ≤ 215 HBW EN 10272 Table 7 16 – 19 HRC1)
EN 10272, 1.4404 stellited SA 479 316L stellited ≥ 35 HRC Manufacturers specification 40 HRC
HBW: BRINELL hardness acc. DIN EN ISO 6506-1 / HRC: ROCKWELL hardness acc. DIN EN ISO 6508-1
Options
1) Rockwell hardness values below 20 HRC are not allowed according to DIN EN ISO 6508-1.
Lower, fictitious values were created for better comparison.
99/06 LWN 480.01-E

Soft seal selection
Soft seal selection

Abbrevation Trade name Code- Option Tmin Tmax
Application2)
ASTM 1418 (Designation) letter1) Code [°C] [°F] [°C] [°F]
O-ring
Parafin oil, silicone oil and grease, water and
CR Neoprene® K J21 -40 -40 100 212
waterbased solvents, refrigerants, ozone
Buna-N®
NBR (Nitrile-Butadiene) N J30 -25 -13 100 212 Hydraulic oil, vegetable and animal grease and oil
Buna-EP® Hot water and superheated steam up to 150 °C,

EPDM (Ethylene-Propylene- D J22 -45 -49 150 302 302 °F, some organic and inorganic acids,
Dine) silicone oil and grease, FDA compliant
High temperature service (no superheated steam),
Viton® mineral oil and grease, silicone oil and grease,
FKM (Fluorocarbon) L J23 20 -4 180 356
vegetable and animal grease and oil, ozone, FDA
compliant compound available on request
Nearly all chemicals, standard compound is
Kalrez®
FFKM C J20 0 32 250 482 Kalrez® 6375 with steam resistance, FDA compliant
(Perfluo)
compound available on request
Sealing plate
High temperature and high pressure applications
VESPEL SP-1®
SP (Polyimide) T J49 -270 -454 300 572 (no steam), for chemical resistance refer to
manufacturers guide
KEL-F® Cryogenic and refrigeration applications, flammable

PCTFE (Polychlorotri- G J48 -270 -454 204 400 media applications, (e.g. gaseous oxygen) up to
fluoroethylene) 50 bar, 725 psig at 60 °C, 140 °F
Teflon®
PTFE (Polytetrafluoro- A J44 -184 -300 150 302 Nearly all chemicals
ethylene)
For other materials please contact your
Other than listed X local representative or sales@leser.com
1) The code letters will be stamped on the disc (Item 1).

2) Pressure and temperature service must be considered in any case.
Chemical resistance information is supplied by the O-ring manufacturer. LESER can not take any warranty.
Options
99/10 LWN 480.01-E

Balanced bellows – Subassembly item 15
LESER is able to provide a balanced bellows design through AB

the use of stainless steel bellows.
Balanced bellows are generally used for two applications:

- to compensate for back pressure
- to seal off the bonnet from the outlet chamber
FO
Compensation for back pressure pa
FC
The back pressure acts on the reverse side of the disc, creating a force
in the closing direction (Fc) of the safety valve. The magnitude of this force AS
depends on the seat area and the level of the back pressure. The balanced
bellows constitute an opposite area with the same area like the seat. The
back pressure acts on, thereby reducing or eliminating the closing force. This
reduction of the force in the closing direction can be viewed as a compensating
force acting in the opening directon (Fo).
A quantitative representation is shown in the table below:
Actual area Back pressure Actual force Direction of force Compensation criteria
Seat area = AS pa FC = pa x AS closing AS = AB

Bellows area = AB pa FO = pa x AB opening FC = FO
Sealing the bonnet from the outlet chamber

LESER‘s balanced bellows reliably seal the bonnet from the outlet chamber; protecting the guide,
moving parts and the spring from problems associated with the fluid, such as dirt, corrosion, impurities of temperature.
Operating conditions
Temperature limits [°C] up to 550 °C
[°F] up to 1000 °F
Minimum set pressure Orifice Steam /Air Water

[bar] [psig] [bar] [psig]
D 3,5 50,8 3,5 50,8
E 3,5 50,8 3,5 50,8
F 0,6 8,7 2,0 29
G 3,2 46,4 2,8 40,6
H 2,8 40,6 2,8 40,6
J 3,5 50,8 5,0 72,5
K 2,2 31,9 2,5 36,3
L 3,5 50,8 3,5 50,8
M 2,6 37,7 2,2 31,9
N 1,8 26,1 1,8 26,1
P 2,2 31,9 2,2 31,9
Q 1,3 18,8 2,3 33,5
R 1,0 14,5 1,4 20,3
Options
T 1,2 17,4 2,5 36,3
99/12 LWN 480.01-E

Balanced bellows – Subassembly item 15
Balanced bellows
Type 526 Orifice D – 6 R 8 6 R 10 – 8 T 10
NPT 1/2
Design 15.2
11
15.3
15.1
Bonnet spacer * –
Bellows housing * *
The bellows housing protects the bellows against turbulences during discharge to avoid bellows vibration and to guarantee a longer life-time.
Control ASME B1.20.1 NPT 1/2
thread * *
1/
A control thread ASME B1.20.1 NPT 2 is fitted into the bonnet to monitor the condition of the bellows.
A discharge pipe can be fitted to the NPT 1/2 control thread to allow safe discharge of aggressive or toxic fluids.
Bellows materials For standard bellows materials please refer to page 01/05. Hastelloy® and Inconel® are available as well.
Option code
Standard bellows J68 J68
Open
bonnet Low pressure bellows – –
Other materials than stand. S15 + material designation S15 + material designation
Standard bellows J78 J78
Closed Low pressure bellows – –
bonnet
Other materials than stand. S15 + material designation S15 + material designation
The dimensions and weights of a safety valve with balanced bellows are displayed in the tables “Dimensions and weights”.
The temperature range is displayed in the tables “Pressure temperature ratings”.
Balanced bellows conversion kits

LESER balanced bellows conversion kits are available to convert from a convential design into a balanced bellows design with
little effort. The conversion kits contain all the necessary parts for conversion as well as instructions.
Conversion kits
Item Component Quantity Material Remarks
1 1.4404
8 Guide
316L
Bonnet spacer / 1 1.4404
11
Cooling spool 316L
1 1.4404
12 Spindle
316L
1 1.4571
15 Bellows
316Ti
4, 8, 12 depends on valve size 1.4401
55 Stud
B8M
2, 3 depends on valve size Graphite / 1.4401
60 Gasket
Graphite / 316
Installation 1 LWN 037.05
Options
–
instruction
For article no. and spare parts please refer to spare part page 01/79.
LWN 480.01-E 99/13

High temperature equipment
For fluid temperatures higher than 400 °C / 752 °F high temperature equipment is necessary to protect the inner parts and
the spring against inadmissible influence of temperature. The maximum inlet temperature is 550 °C / 1022 °F. The equipment
shown is only fitted in Type 5267. For all other Types an open bonnet and a stainless steel bellows is necessary for fluid tem-
peratures exceeding 400 °C / 752 °F up to max. 450 °C / 842 °F.
Specification
Type 5267
Design 54
55
56
11
15
Option code J88

Operating conditions
Temperature limits [°C] > 400 fluid temperature
[°F] > 752 fluid temperature
max. [°C] 550 inlet temperature
max. [°F] 1022 inlet temperature
Materials High temperature equipment

Item Component
1.7357
1 Body
WC6
1.4404
5 Nozzle
316L
1.4404 stellited
7 Disc
316L stellited
1.0619
9 Bonnet open
WCB
1.4404
11 Cooling spool
316L
1.4571
15 Bellows
316L
1.7102, 1.8159
54 Spring
High temperature alloy steel
1.7709
Options
55 Studs
B16
1.7258
56 Nuts
7M
99/14 LWN 480.01-E

Cat 0003

Uploaded by

Copyright:

Available Formats

Cat 0003

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cat 0003

Uploaded by

Copyright:

Available Formats

Type

Order information – Spare parts 07/14

LWN 481.01-E 07/01

Type 462 Male Type 462 Female

Type 462 Type 462

07/06 LWN 481.01-E

LWN 481.01-E 07/07

11 Bonnet Outlet flange

Balanced bellows Conventional design

07/02 LWN 481.01-E

Threaded 1.4104 1.4404 1.4404

1.4104 1.4104 1.4404

– Modifications reserved by LESER.

Height inlet thread “Male”

Length of screwed end “c” inlet thread “Male”

07/08 LWN 481.01-E

Flange dimensions and availability

Conventional design Balanced bellows

LWN 481.01-E 07/09

Min. set pressure1)

Min. set pressure

Min. set pressure p [barg] S/G/L 3 3 3

Pressure rating PN 250 PN 160 PN 160

Min. set pressure1) p [barg] S/G/L 3 3 3

07/12 LWN 481.01-E

from the homepage of the classification societies.

LWN 481.01-E 07/17

Metric Units AD 2000-Merkblatt A2

Actual Orifice diameter d0 [mm] 9 13 17,5

240 9843 9529 32,1

07/18 LWN 481.01-E

US Units ASME Section VIII

Actual Orifice diameter d0 [inch] 0,354 0,512 0,689

LWN 481.01-E 07/19

Male thread Female thread Flanged version

Soft seal o-ring disc

Heating jacket Balanced bellows Special material

Lift indicator Test gag O-ring-damper H2 O-ring-damper H4

J93: Lift indicator J69: H4 J65 J66

07/16 LWN 481.01-E

09/02 LWN 481.01-E

LWN 481.01-E 09/03

Cap H2 Packed lever H4 1

Plain lever H3 Test gag

The test gag is used for:

against unallowable overpressure!

09/04 LWN 481.01-E

Threaded connections Male thread Female thread

09/06 LWN 481.01-E

Flanged connections Flanged version

900 – – – V23 – V23

LWN 481.01-E 09/07

Types 459 and 462 – Soft seal

Features and bennefits

– two different designs for a wide variety application

Soft seal solutions Series 459

Disc with inserted sealing plate, optional O-ring disc

increased tightness at temperatures superior tightness maintained tightness

Subassembly of the disc (item 7), bill of materials