Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 328 views

    Blokset: Modular Designation

    Uploaded by

    Jabir Quadri
    The BLOKSET Switchgear adopts Schneider company's technology, allowing it to perform well like Schneider electric components. It has two types: fixed grid and drawable. The horizontal main bus bar is on top while vertical bus bars are on the sides or rear, allowing end users to connect cables from the sides or rear. All components use modular construction. It has dimensions of 1200x2200x1000 mm for incoming, 900x2200x1000 mm for feeders and controllers. It can operate manually or via motors, install horizontally indoors, and connect via bus bars or cables. Earthing, protection, and anti-sepsis features are included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Blokset: Modular Designation

    Uploaded by

    Jabir Quadri
    328 views2 pages
    The BLOKSET Switchgear adopts Schneider company's technology, allowing it to perform well like Schneider electric components. It has two types: fixed grid and drawable. The horizontal main bus bar is on top while vertical bus bars are on the sides or rear, allowing end users to connect cables from the sides or rear. All components use modular construction. It has dimensions of 1200x2200x1000 mm for incoming, 900x2200x1000 mm for feeders and controllers. It can operate manually or via motors, install horizontally indoors, and connect via bus bars or cables. Earthing, protection, and anti-sepsis features are included.

    Original Description:

    Blokset Brochure

    Original Title

    Blokset Brochure-2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The BLOKSET Switchgear adopts Schneider company's technology, allowing it to perform well like Schneider electric components. It has two types: fixed grid and drawable. The horizontal main bus bar is on top while vertical bus bars are on the sides or rear, allowing end users to connect cables from the sides or rear. All components use modular construction. It has dimensions of 1200x2200x1000 mm for incoming, 900x2200x1000 mm for feeders and controllers. It can operate manually or via motors, install horizontally indoors, and connect via bus bars or cables. Earthing, protection, and anti-sepsis features are included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    328 views2 pages

    Blokset: Modular Designation

    Uploaded by

    Jabir Quadri
    The BLOKSET Switchgear adopts Schneider company's technology, allowing it to perform well like Schneider electric components. It has two types: fixed grid and drawable. The horizontal main bus bar is on top while vertical bus bars are on the sides or rear, allowing end users to connect cables from the sides or rear. All components use modular construction. It has dimensions of 1200x2200x1000 mm for incoming, 900x2200x1000 mm for feeders and controllers. It can operate manually or via motors, install horizontally indoors, and connect via bus bars or cables. Earthing, protection, and anti-sepsis features are included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Blokset

    Modular designation Summary

    The Prisma P switchgear has 35 Nos. modular, each modular: BLOKSET Switchgear adopts Schneider company's technology, it can put up
    Absolute independence. all the good performances of Schneider electric components. The switchgear
    Installed in prefabricate installation board. has two types: Fixed grid type and drawable types. The horizontal main bus
    Protected by the front board. bar stayes in the top of switchgear while the vertical bus bar st ayes in the side
    The vertical height is 50 mm modular is a unit which contains: up & down wiring and auxilary wiring. or rear parts of the switchgear, so the end users cable can connect from the
    side or rear. All the performance unit adopts modular constrution.
    Intelligentized designation
    Outline dimension of the switchgear
    Complete power grid
    Allocated power grid Incoming cubicle: 1200x2200x1000 mm (WxHxD)
    With communication function: Feeder cubicle: 900x2200x1000 mm (WxHxD)
    Ambient condition Controlling cubicle: 900x2200x1000 mm (WxHxD)
    Altitude 2000m, indoor installtion;
    Ambient temperature:-0.5 to + 40 , Average temperature 35 ; Operation,Installation,Connection,Earthing Protection and Antiseptic.
    Ambient humidity: when the temperature is 40 , it can be 50%, when the temerature is lower than 40 , it can bear higher
    relative humidity; Operation type: Motor operating or rotating manual
    Pollution degree is grade 3. Installation type: Indoor horizontal fixed installation
    The installtion ground evenness should be less than 2mm/m. Connection type: Bus bar or Cable connection
    Earthing Protection type: Earthing busbar
    Technical specification Antiseptic: Printed by epoxy resine.

    Prisma P Main electric data


    Relative standard
    Rated current: 4000A, 3150A
    IEC 60439-1, EN 60439-1, NF EN 60439-1,
    Type test parts
    DIN 41-488, BS 5486, GB 7251-1 Short-time withstand current of the horizontal bus bar: 100KA/220KA
    Inner arcing withstand NO.68042 Short-time withstand current of the vertical bus bar: 85KA/187KA
    Protection degree IEC 60529 The height of the drawer: 9M,12M
    Impact resistance EN 50102 According to the short circuit withstand intention certification, the current and bus bar's specification of the switchgear is as
    Electric characteristic following:
    Rated insulation voltage(V) 1000
    Rated operation voltage(V) 690 Current 4000A 3150A 1600A
    Rated impluse withstand voltage 12 Spec of bus bar 5x(100x5) 4x(100x4) 1x(1x1000)
    Over voltage type
    Insulating supporter Insulating supporter Insulating supporter
    Pollution degree 3 Bus bar clamp (POLYCARBONATE LEXAN R500) (POLYCARBONATE LEXAN R500) (POLYCARBONATE LEXAN R500)
    Frequency 50/60 + Aluminum alloy(ENAW-5754 H111) + Aluminum alloy(ENAW-5754 H111) + Aluminum alloy(ENAW-5754 H111)
    Rated current 630~4000 Switchgear dimension 900mm 900mm 900mm
    Main busbar Rated short time withstand current 85
    Rated peak withstand current 187
    Ambient condition
    Rated current 630~4000
    Branch busbar Rated short time withstand current 85
    a. Ambient temperature:-0.5 to + 40 , Average temperature 35 ;
    Rated peak withstand current 187
    b. Altitude 2000m,indoor installtion;
    Mechanism charactristic
    Height 2025 c. Ambient humidity: when the temperature is 40 , it can be 50%, when the temerature is lower than 40 , it can b ear higher

    Modular 35 relative humidity;


    Width 700/900/1100/1200 d. The gradient between the vertical board should be less than 5%, and the integrate switchgear group is in level.
    Depth 400/600/800/1000 e. Applicable occasions should be free from inflammables, explosives, corrosives and severe vibration.
    Division type protection degree IP 20/30/31/54
    Outward impact resistance IK 08

    51 52
    Blokset Dc Blokset Ms
    Technical specification

    Protection degree IP 30 IP54

    Rated insulation voltage AC660(1000)


    Main circuit AC380(660)

    Rated running voltage AC380,220,24


    Auxiliary circuit
    DC220,110

    Rated frequency (Hz) 50(60)

    Rated current of horizontal bus bar (A) 6300

    Rated current of vertical bus bar(A) Mw 1000A D 3200A

    Rated current of cabinet unit (A) 400

    Rated peak withstand current (KA) 63/105/187/220


    Rated short time withstand current(KA) 30/50/85/100
    Main circuit 2500(3500)
    P.F. withstand voltage (V)
    Auxiliary circuit 2500
    Protection circuit resistance( ) 0.01
    Blokset Mf

    Arrangement of the switchgear

    Modular design of BLOKSET allows the layout of switchgears and electrical rooms to match in good configuration.
    a. The switchgears can be parallel connection or back to back connection:
    According to the available space of the installation room, the back to back connection can reduce the total length in half.
    b. It is allowed to enter into the switchgear's connection area from front or back side:
    If the wiring terminals are in the side grid of the swtichgear, it can enter into from the front, so the swtichgear c an be place d
    close to the wall.
    c. If the wiring terminals are in the back side of the switchgear, it can be enterrd from back.
    d. The incoming or outgoing cable can enter from top or bottom of the switchgear:
    If the switchgears are installed in above of auxiliary board or cable channel, the cable is better enter from the bottom.
    e. If the switchgears are installed in above of auxiliary board or cable channel, the cable is better enter from the bottom.
    f. The power supply also can be from the top and enter into bus bar duct.

    Outline drawing

    Blokset D Blokset Mw

    53 54

    You might also like