Eurobrass 143: Pressure Reducing Valve

Pressure always under control.
MOD. SP143.ING – rev. 07.2007 SCHEDE Q360
PRESSURE REDUCING VALVE
EUROBRASS 143
EUROBRASS 143
• Brass pressure reducing valve;

• PN 25;
• Adjustable outlet pressure between 0,5
and 6 bar;
• Brass diaphragm mechanism;
• System of pressure compensation;
• Max temperature of use 80° C;
• Available sizes: from 3/8" to 4".
ART. 143 ART. 143.N
FIELDS:
The pressure reducing valves series EUROBRASS 143 are suitable for reduction and control of pressure in plants with the
following characteristics:
Max inlet pressure: 25 bar

Field of action (outlet pressure): 0,5 - 6 bar (1,5 – 6 bar)¹
Max temperature of use: 80° C
130° C¹
Threading of connection: ISO 228/1
Tested according to rules: DIN EN 1567
Suitable fluids: Water, air.
Water, air, diesel oil.1
Reduction rate: 5:1
MATERIALS:
Metal of the body: Brass alloy CW617N UNI EN 12165 - CB753S EN 1984
Metal of the inner parts: Brass alloy CW614N UNI EN 12164
Seat: Stainless steel AISI 303
Bar: Brass alloy CW614N UNI EN 12164
Stainless steel AISI 3032
O-rings: NBR 70sh
FP75N 75sh¹
Flat gaskets: Fasit Italy
Plastic parts: Ultramid® A3K (BASF)
1
Only sizes 3" and 4".
2
Sizes from 1"¼ to 4".
1
MAIN DIMENSIONS OF THE PRESSURE REDUCING VALVES EUROBRASS 143
ITEM DN H L
143.38 3/8" 120 75
143.12 ½" 120 75
143.34 ¾" 150 85
143.33 1" 160 89
143.114 1" ¼ 220 125
143.112 1" ½ 220 130
143.58 2" 250 138
143.160 2" ½ 260 145
143.80 3" 285 177
143.100 4" 310 190
DISCHARGE AND HEADLOSS CHART:
2
BEST HYDRAULIC DISCHARGE OF PRESSURE REDUCERS EUROBRASS 1433
In order to choose the best pressure reducers for any plant, we suggest to follow the indications mentioned in the
underexposed table with the best running pressure of the valves Eurobrass 143; the values are exposed both in
litres/minute and cbm/hour, and indicate the field of use where you can obtain the best functioning, silence and smaller
loss of charge of the valves.
MODEL SIZE AVERAGE HYDRAULIC DISCHARGE AVERAGE HYDRAULIC DISCHARGE

L/min Cbm/hour
EUROBRASS 143 3/8" 15 - 30 0,9 - 1,8
EUROBRASS 143 ½" 20 - 50 1,2 - 3
EUROBRASS 143 ¾" 50 - 75 3 - 4,5
EUROBRASS 143 1" 75 - 95 4,5 - 6
EUROBRASS 143 1" ¼ 95 - 130 6 - 8
EUROBRASS 143 1" ½ 110 - 140 7 - 8,5
EUROBRASS 143 2" 120 - 160 7,5 - 10
EUROBRASS 143 2" ½ 140 - 180 8,5 - 11
EUROBRASS 143 3" 160 - 220 10 - 13,2
EUROBRASS 143 4" 200 - 260 12 - 15,6
INSTALLATION OF THE PRESSURE REDUCING VALVE
The pressure reducers EUROBRASS 143 don’t get the effects – for their functioning – of the gravity force; therefore they
can be installed in the plant in any position:
Pressure reducing valves can be damaged by dirty water; therefore we advise to install a self-cleaning filter upstream
before the pressure reducer, in order to protect the valve and any other mechanism (thermostatic mixers, taps, etc.).
When there is a device which produce or store hot water or pipes are exposed to sudden changes in temperature, an
increase of outlet pressure may occur; this event is due to the raise in pressure that follows the temperature rising: an
expansion vessel between downstream the pressure reducing valve will avoid this problem.
We recommend moreover to install a Stopshock valve to prevent water hammer which would damage the inner parts of
the pressure reducer and other devices in the waterworks.
3
Test by ISTITUTO GIORDANO SPA - Bellaria - Italy
3
A recommended installation of the pressure reducing valve:
1 – BALL VALVE 3 – EUROBRASS PRESSURE REDUCER 5 – EXPANSION VESSEL

2 – NEPTUN SELF-CLEANING FILTER 4 – STOPSHOCK VALVE 6 – BALL VALVE
HOW TO REGULATE THE PRESSURE

All Malgorani pressure reducers are tested before being packaged; during the proof they are pre-set at the outlet pressure
of 3 bars; the outlet pressure can be easily modified when the valve is installed on the plant.
In order to modify the outlet pressure, you should only loosen the fixing ring and turn the spring holder as indicated in the
pictures sequence. By turning clockwise the pressure increases, while counter-clockwise the pressure decreases.
A right setting should be made while the plant is closed.
_____________________________________________________________________________
RUBINETTERIA MALGORANI PIETRO SRL - Via per Invorio 24 - 28010 COLAZZA - NO -ITALY
Tel. +39 0322 218129 fax +39 0322 218301 info@malgorani.it
4

Eurobrass 143: Pressure Reducing Valve

Uploaded by

Copyright:

Available Formats

Eurobrass 143: Pressure Reducing Valve

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Eurobrass 143: Pressure Reducing Valve

Uploaded by

Copyright:

Available Formats

Pressure always under control.

MOD. SP143.ING – rev. 07.2007 SCHEDE Q360

PRESSURE REDUCING VALVE

• Brass pressure reducing valve;

ART. 143 ART. 143.N

Max inlet pressure: 25 bar

MAIN DIMENSIONS OF THE PRESSURE REDUCING VALVES EUROBRASS 143

DISCHARGE AND HEADLOSS CHART:

BEST HYDRAULIC DISCHARGE OF PRESSURE REDUCERS EUROBRASS 1433

MODEL SIZE AVERAGE HYDRAULIC DISCHARGE AVERAGE HYDRAULIC DISCHARGE

INSTALLATION OF THE PRESSURE REDUCING VALVE

A recommended installation of the pressure reducing valve:

1 – BALL VALVE 3 – EUROBRASS PRESSURE REDUCER 5 – EXPANSION VESSEL

HOW TO REGULATE THE PRESSURE

You might also like