Product Datasheet

Enable™ 4009MC Blown

Product Description
Enable 4009MC is a medium density ethylene 1-hexene copolymer that offers an outstanding balance between extrusion processing and film
properties, including modulus, tensile, impact and puncture. TnPP is not intentionally added to Enable 4009MC.

General
Availability 1 • Africa & Middle East • Europe
• Asia Pacific • North America
Additive • Antiblock: No • Processing Aid: Yes
• Slip: No • Thermal Stabilizer: Yes
Applications • Bread Bags • Hygiene film • Lamination Film
• Compression Packaging • Lami Tubes • Monofilament
Revision Date • 05/22/2018

Resin Properties Typical Value (English) Typical Value (SI) Test Based On
Density 0.940 g/cm³ 0.940 g/cm³ ASTM D1505
Melt Index (190°C/2.16 kg) 0.90 g/10 min 0.90 g/10 min ASTM D1238

Film Properties Typical Value (English) Typical Value (SI) Test Based On
Tensile Strength at Yield MD 2600 psi 18 MPa ASTM D882
Tensile Strength at Yield TD 3000 psi 21 MPa ASTM D882
Tensile Strength at Break MD 8100 psi 60 MPa ASTM D882
Tensile Strength at Break TD 6300 psi 43 MPa ASTM D882
Elongation at Break MD 600 % 600 % ASTM D882
Elongation at Break TD 830 % 830 % ASTM D882
Secant Modulus MD - 1% Secant 74000 psi 510 MPa ASTM D882
Secant Modulus TD - 1% Secant 86000 psi 590 MPa ASTM D882
Dart Drop Impact < 60 g < 60 g ASTM D1709
Elmendorf Tear Strength MD 20 g 20 g ASTM D1922
Elmendorf Tear Strength TD 550 g 550 g ASTM D1922
Puncture Force 8 lbf 35 N ExxonMobil
Method
Puncture Energy 8.7 in·lb 0.98 J ExxonMobil
Method

Optical Properties Typical Value (English) Typical Value (SI) Test Based On
Gloss (45°) 35 35 ASTM D2457
Haze 19 % 19 % ASTM D1003

Legal Statement
Tris(nonylphenol)phosphite (TNPP) CAS# 26523-78-4 is not intentionally used by ExxonMobil in this product. Although this product is not
routinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact that
this substance is not intentionally used by ExxonMobil in this product does not exclude that trace levels of this substance may be present as a result
of the specific characteristics of the raw materials and/or of the manufacturing process.

This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of
ExxonMobil Chemical as to the intended use. For detailed Product Stewardship information, please contact Customer Service.

Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

Processing Statement
Film (1 mil / 25.4 micron) made from Enable 4009MC on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of
380-400°F (193-204°C), a 30 mil (0.76 mm) die gap at a rate of 10 lbs/hr/in die circumference (1.79 kg/hr/cm).

Notes
Typical properties: these are not to be construed as specifications.
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete
Country Availability.

Effective Date: 05/22/2018 ExxonMobil Page: 1 of 2

Enable™ 4009MC Blown

For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs

©2019 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of
ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written
authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document
is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it
in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of
representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when
not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not
represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent
infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely
responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability
for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in
this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication.
The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil
Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.

exxonmobilchemical.com

Effective Date: 05/22/2018 ExxonMobil Page: 2 of 2