Product Datasheet

ExxonMobil™ LDPE LD 105 Series

Low Density Polyethylene Resin

Product Description
ExxonMobil™ LD 105 resins are homopolymer packaging film resins designed for applications requiring outstanding clarity with good stiffness.
These resins can be processed in either blown or cast film equipment. In blown film equipment LD 105.30 and LD 105.DS resins can be drawn
down to 1.0 mil gauge.

General
Availability 1 • Asia Pacific • Latin America • North America
Additive • LD 105.BR: Antiblock: 1000 ppm; Slip: 750 ppm; Thermal Stabilizer: Yes
• LD 105.DS: Antiblock: 1000 ppm; Slip: No; Thermal Stabilizer: Yes
Applications • Blend Partner • Freezer Film • Light Duty Shrink Film
• Bread Bags • High Clarity Film • Produce Bags
• Display Packaging Film • High Quality Lamination • Salad Bags
• Food Packaging • Lamination Film • Textile Packaging
• Form Fill And Seal Packaging • Laundry Film
Revision Date • 06/17/2020

Resin Properties Typical Value (English) Typical Value (SI) Test Based On
Density 0.923 g/cm³ 0.923 g/cm³ ASTM D1505
Melt Index (190°C/2.16 kg) 2.0 g/10 min 2.0 g/10 min ASTM D1238
Peak Melting Temperature 234 °F 112 °C ExxonMobil
Method

Thermal Typical Value (English) Typical Value (SI) Test Based On

Vicat Softening Temperature 203 °F 95.0 °C ExxonMobil
Method

Film Properties Typical Value (English) Typical Value (SI) Test Based On
Tensile Strength at Yield MD 1500 psi 11 MPa ASTM D882
Tensile Strength at Yield TD 1600 psi 11 MPa ASTM D882
Tensile Strength at Break MD 3400 psi 23 MPa ASTM D882
Tensile Strength at Break TD 2800 psi 19 MPa ASTM D882
Elongation at Break MD 180 % 180 % ASTM D882
Elongation at Break TD 510 % 510 % ASTM D882
Secant Modulus MD - 1% Secant 31000 psi 210 MPa ASTM D882
Secant Modulus TD - 1% Secant 37000 psi 250 MPa ASTM D882
Dart Drop Impact 90 g 90 g ASTM D1709A
Elmendorf Tear Strength MD 290 g 290 g ASTM D1922
Elmendorf Tear Strength TD 190 g 190 g ASTM D1922
Puncture Force 8 lbf 37 N ExxonMobil
Method
Puncture Energy 5.1 in·lb 0.58 J ExxonMobil
Method

Optical Properties Typical Value (English) Typical Value (SI) Test Based On
Gloss (45°) 78 78 ASTM D2457
Haze 5.1 % 5.1 % ASTM D1003

Legal Statement
This product is not intended for use in medical applications and should not be used in any such applications.

Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

Processing Statement
Film (1.5 mil/38.1 micron) made from LD 105.30 resin on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of
340-360°F (171-182°C), a 30 mil (0.76 mm) die gap at a rate of 8 lbs/hr/in die circumference (1.43 kg/hr/cm).

Effective Date: 06/17/2020 ExxonMobil Page: 1 of 2

Product Datasheet

ExxonMobil™ LDPE LD 105 Series

Low Density Polyethylene Resin

Notes
Typical properties: these are not to be construed as specifications.
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete
Country Availability.

For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs

©2022 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of
ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written
authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document
is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it
in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of
representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when
not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not
represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent
infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely
responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability
for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in
this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication.
The terms “we,” “our,” "ExxonMobil Product Solutions" and "ExxonMobil" are each used for convenience, and may include any one or more of
ExxonMobil Product Solutions Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.

exxonmobilchemical.com

Effective Date: 06/17/2020 ExxonMobil Page: 2 of 2