Product Datasheet

Enable™ 2005 Series

Performance Polymer

Product Description
Enable™ 2005 resins are ethylene 1-hexene copolymers. Enable™ performance polymer resins offer an outstanding balance between processing
and film properties, including tensile, impact and puncture. Easier processing and excellent properties lead to significant high pressure LDPE
replacement in many applications, yet with superior drawdown and enhanced toughness. TnPP is not intentionally added to Enable™ 2005 resins.

General
Availability 1 • Africa & Middle East • Europe • North America
• Asia Pacific • Latin America
Additive • Enable™ 2005ME: Antiblock: 2000 ppm; Slip: 500 ppm; Processing Aid: Yes; Thermal Stabilizer: Yes
• Enable™ 2005MC: Antiblock: No; Slip: No; Processing Aid: Yes; Thermal Stabilizer: Yes
• Enable™ 2005PA: Antiblock: No; Slip: No; Processing Aid: No; Thermal Stabilizer: Yes
Applications • Agricultural Film • Food Packaging • Shrink Film
• Blown Film • Form Fill And Seal Packaging • Stand Up Pouches
• Cast Film • Heavy Duty Bags • Stretch Film
• Cast Stretch Film • Lamination Film
• Collation Shrink • Multilayer Packaging Film
Revision Date • 09/01/2018

Resin Properties Typical Value (English) Typical Value (SI) Test Based On
Density 0.920 g/cm³ 0.920 g/cm³ ASTM D1505
Melt Index (190°C/2.16 kg) 0.50 g/10 min 0.50 g/10 min ASTM D1238
Peak Melting Temperature 239 °F 115 °C ExxonMobil
Method

Thermal Typical Value (English) Typical Value (SI) Test Based On

Vicat Softening Temperature 225 °F 107 °C ASTM D1525

Film Properties Typical Value (English) Typical Value (SI) Test Based On
Tensile Strength at Yield MD 1400 psi 9.9 MPa ASTM D882
Tensile Strength at Yield TD 1600 psi 11 MPa ASTM D882
Tensile Strength at Break MD 8800 psi 60 MPa ASTM D882
Tensile Strength at Break TD 8000 psi 60 MPa ASTM D882
Elongation at Break MD 480 % 480 % ASTM D882
Elongation at Break TD 710 % 710 % ASTM D882
Secant Modulus MD - 1% Secant 30000 psi 210 MPa ASTM D882
Secant Modulus TD - 1% Secant 34000 psi 240 MPa ASTM D882
Dart Drop Impact 240 g 240 g ASTM D1709A
Elmendorf Tear Strength MD 90 g 90 g ASTM D1922
Elmendorf Tear Strength TD 570 g 570 g ASTM D1922
Puncture Force 12 lbf 54 N ExxonMobil
Method
Puncture Energy 33 in·lb 3.8 J ExxonMobil
Method

Optical Properties Typical Value (English) Typical Value (SI) Test Based On
Gloss (45°) 57 57 ASTM D2457
Haze 7.8 % 7.8 % ASTM D1003

Effective Date: 09/01/2018 ExxonMobil Page: 1 of 2

Product Datasheet

Enable™ 2005 Series

Performance Polymer

Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.

Tris(nonylphenol)phosphite (TNPP) CAS# 26523-78-4 is not intentionally used by ExxonMobil in this product. Although this product is not
routinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact that
this substance is not intentionally used by ExxonMobil in this product does not exclude that trace levels of this substance may be present as a result
of the specific characteristics of the raw materials and/or of the manufacturing process.

Processing Statement
Film (1 mil / 25.4 micron) made on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of 380- 400°F (193 -
204°C), a 30 mil (0.76 mm) die gap at a rate of 10 lbs/hr/in die circumference (1.79 kg/hr/cm).

Notes
Typical properties: these are not to be construed as specifications.
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete
Country Availability.

For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs

©2019 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of
ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written
authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document
is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it
in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of
representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when
not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not
represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent
infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely
responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability
for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in
this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication.
The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil
Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.

exxonmobilchemical.com

Effective Date: 09/01/2018 ExxonMobil Page: 2 of 2