STAAD.

Pro Report
To: From:

Copy to: Date: Ref:

11/11/2020 ca/ 510689135.docx

R.R. ISPAT (A UNIT OF GPIL)

RAIPUR

20 M HIGH MAST

Job Information

Engineer Checked Approved

Name:
Date: 11-NOV.-20

Structure Type SPACE FRAME

Number of Nodes 28 Highest Node 54

Number of Elements 39 Highest Beam 39

Number of Basic Load Cases -2

Number of Combination Load Cases 1

Included in this printout are data for:

All The Whole Structure

Included in this printout are results for load cases:

Type L/C Name
Primary 1 LOAD CASE 1
Primary 2 LOAD CASE 2
Primary 3 LOAD CASE 3
Combination 4 COMBINATION LOAD CASE 4

20/02/2021
 20.000m

Y
X
Z Load 3

Whole Structure Loads 0.0101972Mton:1m 3 LOAD CASE 3

20/02/2021
 PAGE NO. 1

****************************************************
* *
* STAAD.Pro V8i SELECTseries6 *
* Version 20.07.11.33 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= NOV 12, 2020 *
* Time= 11:18:14 *
* *
* USER ID: HIRA GROUP *
****************************************************

1. STAAD SPACE
INPUT FILE: F:\HIRA GROUP\HM20M\HM20.STD
2. START JOB INFORMATION
3. *20 MTR HIGH MAST 8 FIXTURES LIGHTING SYSTEM
4. *TOP DIA. = 150MM
5. *BOTTOM DIA. = 410 MM
6. *THICKNESS - TOP PORTION = 3MM
7. * -BOTTOM POTION =4 MM
8. *MATERIAL -
9. * FOR MAST - S355 GRADE AS PER BS-EN-10 025
10. *FOLLOWING CONSIDERATION HAVE BEEN TAKEN
11. * WIND SPEED 44 M/SEC
12. *WIND LOAD AS PER IS:875
13. *LOADS- LOAD-1 SELF WEIGHT OF STRUCTURE
14. *LOAD-2 DEAD WEIGHT OF PANEL,AND ACCESARIES
15. *LOAD-3 WIND LOAD
16. *LOAD-4 COMBINATION OF LOAD1+LOAD2+LOAD3
17. ENGINEER DATE 19-JUL-18
18. END JOB INFORMATION
19. INPUT WIDTH 79
20. UNIT METER MTON
21. JOINT COORDINATES
22. 7 0 0 0; 8 0 -20 0; 11 -0.250025 0 -0.25; 12 0.25 0 -0.25; 14
0.250025 0 0.25
23. 15 -0.25 0 0.25; 16 -1.18 0 0.25; 17 1.18 0 0.25; 18 -1.18 0 -0.25
24. 19 1.18 0 -0.25; 20 0.66 0 -1.19; 21 -0.66 0 -1.19; 22 0.66 0 1.19
25. 23 -0.66 0 1.19; 24 -1.18 0 -0.5; 26 -1.18 0 0.5; 27 1.18 0 -0.5
26. 28 1.18 0 0.5; 41 0 -8 0; 46 -0.250013 0 0; 47 -0.715012 0 -0.25
27. 48 0.715 0 -0.25; 49 0.715012 0 0.25; 50 -0.715 0 0.25; 51 0.25 0
-1.19
28. 52 -0.250025 0 -1.19; 53 -0.25 0 1.19; 54 0.250025 0 1.19
29. MEMBER INCIDENCES
30. 1 7 15; 2 7 11; 3 7 14; 4 7 12; 5 8 41; 6 11 12; 7 15 14; 8 11 47;
9 12 48
31. 10 19 17; 11 17 49; 12 15 50; 13 16 18; 14 15 46; 15 14 12; 16 21
52; 17 22 54
32. 18 18 24; 19 24 21; 20 20 27; 21 27 19; 22 17 28; 23 28 22; 24 23
26; 25 26 16
33. 26 46 11; 27 47 18; 28 48 19; 29 49 14; 30 50 16; 31 41 7; 32 51
20; 33 12 51

20/02/2021
 STAAD SPACE -- PAGE NO. 2

34. 34 52 51; 35 11 52; 36 53 23; 37 15 53; 38 54 53; 39 14 54

35. DEFINE MATERIAL START
36. ISOTROPIC STEEL
37. E 2.09042E+007
38. POISSON 0.3

20/02/2021
 STAAD SPACE -- PAGE NO. 3

39. DENSITY 7.83341

40. ALPHA 1.2E-005
41. DAMP 0.03
42. TYPE STEEL
43. STRENGTH FY 25819.2 FU 41584 RY 1.5 RT 1.2
44. END DEFINE MATERIAL
45. MEMBER PROPERTY INDIAN
46. 1 TO 4 6 TO 30 32 TO 39 TABLE ST ISA40X40X3
47. MEMBER PROPERTY INDIAN
48. 5 PRIS HDC STA 0.41 END 0.3 THI 0.004
49. 31 PRIS HDC STA 0.3 END 0.15 THI 0.003
50. CONSTANTS
51. BETA 45 MEMB 1 TO 4 6 TO 30
52. MATERIAL STEEL ALL
53. SUPPORTS
54. 8 FIXED
55. LOAD 1 LOADTYPE DEAD TITLE LOAD CASE 1
56. SELFWEIGHT Y -1 LIST ALL
57. LOAD 2 LOADTYPE DEAD TITLE LOAD CASE 2
58. MEMBER LOAD
59. 6 7 10 11 13 TO 28 30 32 34 36 38 UNI GY -0.001
60. LOAD 3 LOADTYPE WIND TITLE LOAD CASE 3
61. MEMBER LOAD
62. 13 18 19 24 25 UNI GX 0.0045
63. 31 UNI GX 0.015
64. 5 UNI GX 0.025
65. LOAD COMB 4 COMBINATION LOAD CASE 4
66. 1 1.0 2 1.0 3 1.0
67. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 28 NUMBER OF MEMBERS 39

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 1

SOLVER USED IS THE IN-CORE ADVANCED MATH SOLVER

TOTAL PRIMARY LOAD CASES = 3, TOTAL DEGREES OF FREEDOM =

162
TOTAL LOAD COMBINATION CASES = 1 SO FAR.

68. PARAMETER 1
69. CODE INDIAN
70. CHECK CODE ALL

20/02/2021
 STAAD SPACE -- PAGE NO. 4

STAAD.Pro CODE CHECKING - (IS-800:1984) v1.1

***********************

ALL UNITS ARE - MTON METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

1 ST ISA40X40X3 (INDIAN SECTIONS)

PASS IS-7.1.1(A) 0.317 4
0.01 C 0.00 0.00 0.00
2 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.336 4
0.00 C 0.00 0.00 0.00
3 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.321 4
0.00 C 0.00 0.00 0.00
4 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.294 4
0.01 T 0.00 0.00 0.00
5 PRI SMAT (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.939 4
0.60 C 0.00 3.97 0.00
6 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.203 4
0.01 C 0.00 0.00 0.50
7 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.210 4
0.01 T 0.00 0.00 0.50
8 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.217 4
0.00 C 0.00 0.00 0.00
9 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.207 4
0.00 C 0.00 0.00 0.00

20/02/2021
 STAAD SPACE -- PAGE NO. 5

ALL UNITS ARE - MTON METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

10 ST ISA40X40X3 (INDIAN SECTIONS)

PASS 7.1.2 BEND C 0.044 4
0.00 T 0.00 0.00 0.50
11 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.078 4
0.00 T 0.00 0.00 0.46
12 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.219 4
0.00 C 0.00 0.00 0.00
13 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.035 4
0.00 T 0.00 0.00 0.50
14 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.156 4
0.00 T 0.00 0.00 0.00
15 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.187 4
0.00 C 0.00 0.00 0.50
16 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.2 0.018 1
0.00 T 0.00 -0.00 0.41
17 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.040 4
0.00 T 0.00 0.00 0.41
18 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.2 0.041 4
0.00 T 0.00 -0.00 0.00

20/02/2021
 STAAD SPACE -- PAGE NO. 6

ALL UNITS ARE - MTON METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

19 ST ISA40X40X3 (INDIAN SECTIONS)

PASS 7.1.2 BEND C 0.023 4
0.00 T -0.00 0.00 0.36
20 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.015 1
0.00 T -0.00 0.00 0.00
21 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.042 4
0.00 C 0.00 0.00 0.25
22 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.045 4
0.00 T 0.00 0.00 0.00
23 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.017 4
0.00 T 0.00 0.00 0.00
24 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.020 3
0.00 C -0.00 0.00 0.50
25 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.031 4
0.00 C 0.00 0.00 0.25
26 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.160 4
0.00 T 0.00 0.00 0.25
27 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.081 4
0.00 C 0.00 0.00 0.00

20/02/2021
 STAAD SPACE -- PAGE NO. 7

ALL UNITS ARE - MTON METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

28 ST ISA40X40X3 (INDIAN SECTIONS)

PASS IS-7.1.1(A) 0.081 4
0.00 C 0.00 0.00 0.00
29 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.204 4
0.00 T 0.00 0.00 0.46
30 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.085 4
0.00 C 0.00 0.00 0.00
31 PRI SMAT (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.483 4
0.18 C 0.00 0.58 0.00
32 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.055 4
0.00 T -0.00 0.00 0.00
33 ST ISA40X40X3 (INDIAN SECTIONS)
PASS 7.1.2 BEND C 0.286 4
0.00 T 0.00 0.00 0.00
34 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.063 4
0.00 C 0.00 0.00 0.00
35 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.281 4
0.00 C -0.00 0.00 0.00
36 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.052 4
0.00 C -0.00 0.00 0.00

20/02/2021
 STAAD SPACE -- PAGE NO. 8

ALL UNITS ARE - MTON METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/

FX MY MZ LOCATION
=======================================================================

37 ST ISA40X40X3 (INDIAN SECTIONS)

PASS 7.1.2 BEND C 0.315 4
0.00 T -0.00 0.00 0.00
38 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.076 4
0.00 C -0.00 0.00 0.50
39 ST ISA40X40X3 (INDIAN SECTIONS)
PASS IS-7.1.1(A) 0.285 4
0.00 C 0.00 0.00 0.00

************** END OF TABULATED RESULT OF DESIGN **************

71. PARAMETER 2
72. CODE INDIAN
73. PRINT SUPPORT REACTION LIST 7 8
SUPPORT REACTION LIST 7

20/02/2021
 STAAD SPACE -- PAGE NO. 9

SUPPORT REACTIONS -UNIT MTON METE STRUCTURE TYPE = SPACE

-----------------

JOINT LOAD FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM Z

8 1 0.00 0.59 0.00 0.00 0.00 -0.00

2 0.00 0.01 0.00 0.00 0.00 -0.00
3 -0.43 0.00 0.00 0.00 -0.00 3.97
4 -0.43 0.60 0.00 0.00 -0.00 3.97

************** END OF LATEST ANALYSIS RESULT **************

74. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= NOV 12,2020 TIME= 11:18:14 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2015 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************

20/02/2021