Pass Lock
Pass Lock
Pass Lock
or START or START
Underhood Left I/P
A/C IPC
Junction Fuse
BFC ACC
Block Block
Fuse Fuse
Sensing
Diag
Module
Purple
Purple
Ign Voltage
Powertrain
Control Module
Pink
IGN
Purple
Serial Data
Light Blue/Black
Serial Data
Yellow
Serial Data
2 Black/White
Ground
White 1
Passlock Ref V
Instrument Panel
Yellow 3 Cluster SECURITY
Key light
Passlock Signal
Black 2
Passlock GND
Passlock cylinder
Body Control case/sensor
Module
Testing
1). Test for battery voltage. If not, check fuses, wiring, and BCM
2). Test for good ground. If not, check wiring and BCM
3). Check voltage. Then turn key. Voltage should go down. If not, replace lock
cylinder case.
© 2012, Rick Muscoplat