The Compensator Catalogue: Willbrandt

WILLBRANDT
The Compensator
Catalogue
Product Description
Technical Data
Advice on Application
Calculation Criteria
Contents
Summary of Compensators 3
Bellow Construction 4
Rubber qualities, reinforcing materials and max. application range
for various bellow types
Material Description 5
Compensators 6
Type 39 6
Type 40 8
Type 42 15
Type 45 17
Type 46 18
Type 48 20
Type 49 21
Type 50 25
Type 51 30
Type 53 31
Type 54 32
Type 55 33
Type 56 35
Type 57 36
Type 58 38
Type 59 39
Type 60 40
Type 61 41
Type 62 42
Type 63 43
Type 64 44
Type 80 46
Tie Bars / Restraints 49
Special Parts 51
Flameproof protective covers, deflector sleeve, earth cover
Stainless Steel Compensators 53

Standard range overview
Stainless Steel Hose Hype 310 / 311 55
Fabric Compensator Hype 300-GEW 58
Planning, Installation and Maintenance Instructions 59

for Types 39, 45, 46, 48, 49, 50, 51, 53, 54, 55, 56, 57
Installation and Maintenance for all Solid Flange 64

for Types 40, 42, 58, 59, 63
Flange Bolt Torques (Nm)

for Types 40, 42, 58, 59, 63 66
Installation and Maintenance Instructions for Type 64 68
Installation Instructions for Type 80 69
Sealing Profile of the Rubber Bellows 70
Flange Mating Dimensions 71

Summary of Compensators Type
55
DN-range 32 - 1000
Overall length (mm) 125 - 300
Type DN-range 50 - 1000 Fields of Application

39 Overall length (mm) variable Shipbuilding, Housing
Technology, Waterworks and
Fields of Application Purification Plants
Shipbuilding, Industrial Plants,
Repair/Substitute
Type DN-range 20 - 300
56 Overall length (mm) 100 - 1000
40 Overall length (mm) 200 - 450 Fields of Application
Shipbuilding, Paper Industry,
Fields of Application Material Handling Technology,
Power Stations, Commercial Media Particles Solution
Plants, Purification Plants,
Pipelines
57 Overall length (mm) 250/300
42 Fields of Application
Overall length (mm) 145 - 450
Shipbuilding, Paper Industry, Media Particles Solution
Hydraulic Systems, Power
Stations Type DN-range 40 - 3000
Typ DN-Range 20 - 50
Overall length (mm) 120 - 155 Fields of Application
45 Shipbuilding, Paper Industry,
Housing Technology, Motor Media Particles Solution
Technology, Air Conditioning System,
Sprinkler System Type DN-range 100 - 3000
59 Overall length (mm) 250/300
46 Overall length (mm) 130 Fields of Application
Fields of Application,
Material Handling Technology,
Housing Technology,
Media Particles Solution
Motor Technology
Type DN-range 50 - 250 Type DN-range 20 - 200

48 Overall length (mm) 150 - 170 60 Overall length (mm) 70/90
Fields of Application Fields of Application
Steel works, Shipbuilding, Housing Technology,
Plant Construction Industrial Plants
Type DN-range 32 - 500 Type DN-range 50 - 1000

49 Overall length (mm) 100/110 61 Overall length (mm) 250
Fields of Application Fields of Application

Housing Technology, Industrial Plants,
Shipbuilding, Plant Motor Technology,
Construction, Gas Plants Sewage Technology
Scales Technology
62 Overall length (mm) variable
50 Overall length (mm) 130/300 Fields of Application
Fields of Application Drainage Systems for Bridges,
Plant Construction, Gas Plants, Large Buildings
Housing Technology, Power
Stations Type DN-range all
Type DN-range 50 - 600 Fields of Application

51 Overall length (mm) 130/250 Special hand-formed items,
Plant construction/Wall seals
Fields of Application
Chemical Plants
Type DN-range all
53 Fields of Application
Overall length (mm) 130
Motor Technology, Sewage
Fields of Application Technology, Air Construction,
Plant constructions, Housing Plant construction/Wall seals
Technology, Waterworks and
Purification Plants
54 Overall length (mm) 65 - 130 Fields of Application
Chemical Plants
Fields of Application
Hydraulic System
3
4
Bellow design Bellows max. pressure / max. permissible temperature bar/°C
colour
Core Reinforcing Cover code Type Type Type Type Type Type Type Type Type Type Type Type Type Type Type Type Type Type
(inner) material (outer) 39 40 42 45 46 48 49 50 51 53 54 55 56 - 59 60 61 62 63 64
Aramide/
EPDM Special cord EPDM red-red 25/130 27/130 80/130 / 16/100 16/110 25/110 16/110 / / / 16/110 6/120 10/110 6/110 / 6/110 /
EPDM Nylon cord EPDM red 16/90 18/90 16/90 10/90 16/90 16/90 25/90 / / 16/90 / 16/90 10/90 / 6/90 3/90 6/90 0,5/120
EPDM Steel cord EPDM red-red-blue 16/130 / 16/130 / 16/110 / / / / / / / / / / / / /

Bellow Construction
Perbunan Aramide/ Perbunan

NBR Special cord NBR yellow-blue 25/120 27/100 80/120 / / / / / / 25/120 / / 6/120 / / / / /
Perbunan Chloroprene
NBR Nylon cord CR yellow 16/80 18/80 16/80 / 16/90 / 25/90 16/90 / 16/90 10/90 16/90 10/90 / 6/90 3/90 6/90 0,4/100
Perbunan Chloroprene
NBR Nylon cord CR orange / 18/90 / / 16/90 / / 25/90 / / / / / / / / / /
Perbunan
NBR Steel cord Chloroprene yellow-yellow 16/120
CR / / / 16/100 / / 16/100 / / / 16/100 / / / / / /
Hypalon Aramide/ Hypalon

CSM Special cord CSM green-blue 25/120 27/130 80/120 / / / / / / 16/120 / / 10/120 / / / 6/120 /
Hypalon Nylon cord Hypalon

CSM CSM green 16/80 18/80 16/80 / 16/90 / 25/80 16/80 / / / 16/80 10/90 / 6/90 3/90 6/90 /
Chloroprene Nylon cord Chloroprene

CR CR grey / 18/80 16/80 / 16/80 16/80 / 16/70 / 16/70 / / 10/70 / / 3/70 / /
Butyl
IIR Nylon cord EPDM red-blue 16/90 18/90 16/90 / 16/90 / 25/90 16/90 / / / 16/90 / / / / 6/90 /
Butyl Aramide/
IIR-D Special cord EPDM red-blue 25/150 / 80/150 / / / / / / 25/150 / / 6/150 / / / / /
Viton Aramide/ Chloroprene

FPM Special cord CR lilac 25/120 / 80/120 / / / / / 25/120 / / / / / 6/100 / 6/120 /
Viton Aramide/ EPDM

Special cord lilac-red 25/150 27/150 80/150 / / / / / 25/150 / / / 6/120 / / / / /
FPM
Viton Aramide/ Viton
FPM Special cord FPM lilac-lilac / / / / / / / / / / / / / / / / / 0,5/200
Aramide/
SI Special cord SI / 6/200 0,2/200
/ / 27/150 / / / / / / / / / / / / /
Special manufacture for higher pressure and temperature is available on request.

Important: Quoted values are max. values. The quoted pressures are valid at 50°C a decrease relative to increasing temperatures.
See resistance lists for specific temperatures.
Material Description
Abbreviation Name Properties

(colour code)
EPDM Ethylene- Good heat resistance and suitable for alkaline waste water, compressed air
propylene- terpolymer (oil free) and chemicals, weather-resistant, good gastightness
terpolymerisat except for hydrocarbon.
red Temperature range -35°C up to +130°C
Not suitable for oils or fatty media.
Perbunan® NBR Acrylnitrile- Oil and fuel quality, also suitable for gases, solvents and fats.
butadiene- High abrasion resistance.
rubber Temperature range -20°C up to +90°C (120°C)
yellow
Not suitable for steam and hot water.
Perbunan® NBR Acrylnitrile- Oil and fuel quality, also suitable for gases, solvents and fats and
butadiene- LPG acc. to DIN 51622. High abrasion resistance.
rubber Temperature range -30°C up to +90°C
orange
Not suitable for steam and hot water.
Perbunan® NBR Acrylnitrile- Foodstuff quality in accordance with RAL guidelines, good for pulps,
butadiene- fats, flours, juices and wines.
rubber Temperature range -20°C up to +90°C
white
Hypalon® CSM Chloro- Chemical resistant quality for acids, bases and lyes.
sulfonated Temperature range -20°C up to +130°C
polyethylen See resistance lists for specific temperatures.
green
Neoprene® CR Chloroprene Water quality, weather-resistant, suitable for some small groups of lyes as well as
rubber compressed air and lightly oil-related media.
Temperature range -25°C up to +90°C
grey
SI Silicone- Diluted hydrochloric acids, animal and herbal oils and fats,
rubber Hydraulic fluids (HFD-R and HFD-S)
none
Butyl® IIR Butyl- Good heat resistance, suitable for alkaline waste water, compressed air (oil free),
rubber chemicals and special hydraulic oils, weather-resistant.
Drinking water quality in accordance with KTW-Guidelines.
red or blue
Butyl® IIR-D Butyl- Good heat resistance, suitable for alkaline waste, compressed air (oil free),
rubber chemicals and special hydraulic oils, weather-resistant.
red/blue
Viton® FPM Fluorine- Particularly suited to high temperatures.

polymer Good resistance to chemicals and oils, combustibles and solvents.
lilac
Not suitable for ketones and chlorine.
PTFE Polytetrafluorine- Total resistance to all media.

ethylene Temperature range -50°C up to +230°C
none Not suitable for alkali metals in molten state and
reaction-formed amides.
The indicated temperatures relate to flexible applications. In rigid applications lower temperatures can be used.
For pressure and expansion details please refer to the type descriptions.
For chemical resistance please see our resistance tables.
5
WILLBRANDT Rubber Compensator Type 39
Type 39 is a hand-built low corrugated rubber compensator and
TYPE 39
can therefore be customised to fit in any existing gap by virtue of
its variable overall length.
Design:
Low corrugated rubber bellow with reinforcing inserts and
built-in packing profile for absorption of the swivel flanges.
The compensator is self-sealing, no additional gaskets

are required.
Characteristics for type 39
Bellow Bellow design Permissible operating data Electrical Hard-

colour code resistance ness
Core Reinforcing Cover
(inner) material (outer) bar °C bar °C bar °C Ohm cm shore A
red-St EPDM Steel cord EPDM 16 50 10 100 6 130 7 x 10 2
60
red EPDM Nylon cord EPDM 16 50 10 70 8 90 7 x 10 2
60
yellow-St NBR Steel cord CR 16 50 12 70 10 100 5 x 103 60
yellow NBR Nylon cord CR 10 50 10 70 10 90 5 x 10 3
60
green-St CSM Steel cord CSM 16 50 12 70 10 90 4 x 1010 65
green CSM Nylon cord CSM 10 50 10 70 10 90 4 x 10 10
65
white NBR/white Nylon cord CR 10 50 10 70 10 80 5 x 103 60
lilac FPM Aramide EPDM 16 50 10 130 4 150 65
Burst pressure > 3 x max. bar
Suitable for vacuum up to 0.8 bar abs., without supporting ring
Suitable for vacuum up to 0 bar abs., with supporting ring
Vacuum supporting rings
WILLBRANDT type 39 compensators are vacuum-
resistant. To prevent the compensator bellow being
drawn together by suction at negative pressure, the
insertion of a vacuum supporting ring is necessary
for a suction value above 2 m (0.8 bar abs., 20%
negative pressure).
Type A
Flanges: (Design A)
Swivel flanges both sides (Design A) with integral rubber
profile, so that additional gaskets are not required (self- Note:
sealing). For aggressive media please refer to the resistance
table. The bellow must not be painted or insulated.
The flanges are drilled to DIN PN 10 as standard. Other Further installation advices in appendix.
specifications in accordance with DIN, ASA, BS and
special flanges are also available. Accessories:
Tie bar/Restraints See page 49
Flange Material: Standard S 235 JRG2 (RSt 37-2) zinc Deflector sleeve See page 51
plated and yellow passivated. Other materials available Flameproof protective cover See page 51
on request. Earth cover See page 52
6
Application:
TYPE 39
Type 39 For drinking water / warm water
red For cold and warm water, also with the addition of
chemicals for water treatment. Industrial water, acids,
yes, alcohols, esters and ketones.
Not suitable for oil-related media.
Type 39 For the food and beverage industry

white Also suitable for oil- and fat-containing foodstuff.
Type 39 For chemical plants

green For heavy chemical use. Permissible temperature, working
pressure and life expectancy depend on the medium and
its concentration in each case.
Type 39 For oils, fuels, gases

yellow Application ranges: City- and natural gas, blast furnace
gas, fuels, lube oils, heating oil, cooling water emulsions

lilac Particularly for higher thermal duty up to approx. 150°C.
The highest permissible load depends on a mixture of
temperature, pressure, movement and life expectancy.
Overall length Bellow Flange PN 10 Movement absorption

DN ØA Effect. ØD ØPC Ød n s axial lat. ∠° ØC
surface + - +/-
mm mm cm2 mm mm mm mm mm mm mm +/- mm
50 130 - 500 96 32 165 125 18 4 16 10 20 15 35 89
65 130 - 500 110 53 185 145 18 4 16 10 20 15 30 104
80 130 - 500 122 85 200 160 18 8 18 15 20 15 30 119
100 130 - 500 142 128 220 180 18 8 18 15 20 15 25 142
125 130 - 500 170 187 250 210 18 8 18 15 20 15 25 169
150 130 - 500 196 259 285 240 23 8 20 15 20 15 20 195
200 130 - 500 256 409 340 295 23 8 20 15 20 15 15 245
250 130 - 500 306 599 395 350 23 12 20 15 20 15 10 295
300 130 - 500 352 822 445 400 23 12 20 15 20 15 10 348
350 130 - 500 442 1080 505 460 22 16 20 15 20 15 10 412
400 150 - 500 495 1379 565 515 26 16 25 20 25 20 8 470
450 150 - 500 545 1801 615 565 26 20 25 20 25 20 8 512
500 150 - 500 595 2038 670 620 26 20 30 20 25 20 6 570
600 150 - 500 695 3286 780 725 30 20 30 20 25 20 6 675
700 150 - 500 832 4183 895 840 30 24 35 20 25 20 5 780
750 150 - 500 882 4751 - - - - 35 20 25 20 4 830
800 150 - 500 932 5407 1015 950 33 24 40 20 25 20 4 887
900 150 - 500 1032 6706 1115 1050 33 28 40 20 25 20 4 985
1000 150 - 500 1134 8231 1230 1160 36 28 40 20 25 20 4 1085
Permissible % of indicated movement relative to temperature:
up to 50°C ~ 100%
up to 70°C ~ 75%
up to 90°C ~ 60%
Tie bar and flange design see Annex page 49
7
Type 40 incorporates a highly flexible convolution with solid rubber
TYPE 40
flanges. It is characterized by its ability to compensate for high
movement and its low inherent resistance.
Design:
High corrugated rubber bellow body with reinforcing inserts and
integral pressure-strengthened solid rubber flanges, self-sealing,
requiring no additional gaskets. One-piece steel backing flanges,
with supporting collar, to ensure the smooth rolling up of the bellow.
Application:
Cooling water piping in power stations and industrial plant, desalination
plants, drinking water supply, shipbuilding and in pumps, turbines
and tanks, for the absorption of movements, oscillations, noise
and vibrations, as well as being installed as an axial and lateral
compensator for building settlement.
Max. DN 5000
Flange:
Standard design acc. to DIN PN 10, retaining flange in S 235 JRG2
(RSt. 37-2) hot-dip galvanized. Other materials and drillings are
possible on request.
Overall lengths:
The indicated overall lengths are standard lengths and can be altered
(multi-corrugated design for higher expansion compensation possible).
Details for type 40
Bellow Core Reinforcing material Cover Pressure Temperature

identification (max.) bar (max.) °C
marking
red EPDM Nyloncord EPDM 18 90

red/red EPDM Aramide EPDM 27 130
blue EPDM Tw Nyloncord EPDM 18 90
white EPDM Tw Nyloncord EPDM 18 90
grey CR Nyloncord CR 18 70
green CSM Nyloncord CSM 18 90
green/red CSM Aramide CSM 27 130
yellow NBR Nyloncord NBR 18 90
yellow/red NBR Aramide NBR 27 100
yellow/yellow H NBR Aramide H NBR 27 130
lilac FPM Nyloncord EPDM 18 90
lilac FPM Aramide EPDM 27 150
SI Glasgewebe SI 3 200
SI Aramide SI 27 150
The pressure indication states a max. value which depends on the lengths and nominal widths (see chart page 9 and 10) burst pressure >50 bar.
All compensators can be delivered with a compensation of potential. Suitable for vacuum up to 0.8 bar abs., without supporting ring (2m suction height). Suitable
for vacuum up to 0 bar abs., with supporting ring (10m suction height). The bellows can be manufactured with vulcanized PTFE foil to achieve a higher chemical
resistance. On request vacuum rings can be vulcanized in the bellow (no vacuum or medium contact). Flange connections will be manufactured on request in all
versions, e.g. PN6, PN10, PN16, ANSI B 16.5 class 150, ANSI B 16.47 class 150.
The steel retaining flanges will be designed according to the pressure with or without supporting collar. The preloading flanges will be calculated according to the
operating pressure (versions see page 49 and 50).
8
Pressure resistance type 40 short length (can be extended and shortened on request)
Reinforcing material
Thick-
DN Overall Effective Wave ness Rubber flange pressure (max.)
length area inner of
length steel Nylon Aramide Expansion
flange
at at at at
10 mm 13 mm 15 mm 15 mm axial +/- lateral +/-
2
mm cm mm mm bar bar bar bar mm mm
200 150 504 260 12 8.5 17.0 25.5 38.3 10/25 20
250 150 717 310 12 8.2 16.4 24.6 36.9 25/10 20
300 150 977 362 12 8.0 16.0 24.0 36.0 25/10 20
350 150 1223 405 12 7.9 15.7 23.6 35.4 25/10 20
400 200 1733 482 15 6.2 12.4 18.5 27.8 20/35 30
450 200 2119 533 15 6.1 12.2 18.3 27.5 20/35 30
500 200 2535 583 15 6.0 12.1 18.1 27.2 35/20 30
550 200 2988 633 15 6.0 11.9 17.9 26.9 35/20 30
600 200 3479 683 15 5.9 11.8 17.8 26.7 35/20 30
650 200 3974 730 15 5.9 11.8 17.6 26.4 35/20 30
700 200 4584 784 15 5.8 11.7 17.5 26.3 35/20 30
750 200 5137 830 15 5.2 11.6 17.4 26.1 35/20 30
800 250 5867 887 15 5.2 10.5 15.7 23.6 35/20 30
850 250 6478 932 15 5.2 10.4 15.6 23.4 35/20 30
900 250 7265 987 15 5.2 10.4 15.6 23.4 35/20 30
950 250 7942 1032 15 5.2 10.3 15.5 23.3 35/20 30
1000 250 8812 1087 15 5.1 10.3 15.4 23.1 35/20 30
1050 250 9556 1132 20 5.1 10.3 15.4 23.1 35/20 30
1100 300 11045 1217 20 4.3 8.6 12.9 19.4 30/40 40
1150 300 11877 1262 20 4.3 8.6 12.9 19.4 40/30 40
1200 300 12935 1317 20 4.3 8.6 12.9 19.4 40/30 40
1250 300 13834 1362 20 4.3 8.6 12.8 19.2 40/30 40
1300 300 14974 1417 20 4.3 8.5 12.8 19.2 40/30 40
1350 300 15940 1462 20 4.3 8.5 12.8 19.2 40/30 40
1400 300 17162 1517 20 4.2 8.5 12.7 19.1 40/30 40
1450 300 18195 1562 20 4.2 8.5 12.7 19.1 40/30 40
1500 300 19499 1617 20 4.2 8.5 12.7 19.1 40/30 40
1600 300 21985 1717 20 4.2 8.4 12.6 18.9 40/30 40
1650 300 23153 1762 20 4.2 8.4 12.6 18.9 40/30 40
1700 300 24621 1817 20 4.2 8.4 12.6 18.9 40/30 40
1800 300 27405 1917 20 4.2 8.4 12.6 18.9 40/30 40
1950 300 31708 2062 20 4.2 8.3 12.5 18.8 40/30 40
2000 300 33422 2117 20 4.2 8.3 12.5 18.8 40/30 40
2100 300 36654 2217 20 4.2 8.3 12.5 18.8 40/30 40
2150 300 38157 2262 20 4.2 8.3 12.5 18.8 40/30 40
2200 300 40036 2317 20 4.2 8.3 12.5 18.8 40/30 40
2250 300 41606 2362 20 4.1 8.3 12.4 18.6 40/30 40
2300 300 43566 2417 20 4.1 8.3 12.4 18.6 40/30 40
2400 300 47245 2517 20 4.1 8.3 12.4 18.6 40/30 40
2500 300 51074 2617 25 4.1 8.3 12.4 18.6 40/30 40
2550 300 52846 2662 25 4.1 8.3 12.4 18.6 40/30 40
2600 300 55052 2717 25 4.1 8.2 12.4 18.6 40/30 40
2700 300 59179 2817 25 4.1 8.2 12.4 18.6 40/30 40
2800 300 63455 2917 25 4.1 8.2 12.3 18.5 40/30 40
2850 300 65428 2962 25 4.1 8.2 12.3 18.5 40/30 40
2900 300 67880 3017 25 4.1 8.2 12.3 18.5 40/30 40
3000 300 72455 3117 25 4.1 8.2 12.3 18.5 40/30 40
max. DN 5000
9
Pressure resistance type 40 standard lengths (can be extended on request - also two-corrugated)
Thick- Reinforcing material

DN Overall Effective Wave ness Rubber flange pressure (max.)
length area inner of
at length steel Nylon Aramide Expansion
flange
at at at at
10 mm 13 mm 15 mm 15 mm axial +/- lateral +/-
2
mm cm mm mm bar bar bar bar mm mm
200 200 627 290 12 6.8 13.6 20.4 30.6 20/35 30
250 200 717 310 12 6.6 13.2 19.7 29.6 35/20 30
300 200 977 362 12 6.4 12.8 19.2 28.8 35/20 30
350 200 1223 405 12 6.3 12.6 18.9 28.4 35/20 30
400 250 1733 482 15 5.6 11.3 16.9 25.4 35/20 30
450 250 2119 533 15 5.5 11.1 16.6 24.9 35/20 30
500 250 2535 583 15 5.5 11.0 16.4 24.6 35/20 30
550 250 2988 633 15 5.4 10.8 16.3 24.5 35/20 30
600 250 3479 683 15 5.4 10.7 16.1 24.2 35/20 30
650 250 3974 730 15 5.3 10.7 16.0 24.0 35/20 30
700 250 4584 784 15 5.3 10.6 15.9 23.9 30/40 40
750 250 5137 830 15 5.3 10.5 15.8 23.7 40/30 40
800 300 5867 887 15 4.4 8.9 13.3 20.0 40/30 40
850 300 6478 932 15 4.4 8.8 13.2 19.8 40/30 40
900 300 7265 987 15 4.4 8.8 13.2 19.8 40/30 40
950 300 7942 1032 15 4.4 8.7 13.1 19.7 40/30 40
1000 300 8812 1087 15 4.3 8.7 13.0 19.5 40/30 40
1050 300 9556 1132 20 4.3 8.7 13.0 19.5 40/30 40
1100 350 11045 1217 20 3.4 6.8 10.1 15.2 40/30 40
1150 350 11877 1262 20 3.4 6.7 10.1 15.2 40/30 40
1200 350 12935 1317 20 3.4 6.7 10.1 15.2 40/30 40
1250 350 13834 1362 20 3.3 6.7 10.0 15.0 40/30 40
1300 350 14974 1417 20 3.3 6.7 10.0 15.0 40/30 40
1350 350 15940 1462 20 3.3 6.6 10.0 15.0 40/30 40
1400 350 17162 1517 20 3.3 6.6 9.9 14.9 40/30 40
1450 350 18195 1562 20 3.3 6.6 9.9 14.9 40/30 40
1500 350 19499 1617 20 3.3 6.6 9.9 14.9 40/30 40
1600 350 21985 1717 20 3.3 6.6 9.8 14.7 40/30 40
1650 350 23153 1762 20 3.3 6.6 9.8 14.7 40/30 40
1700 350 24621 1817 20 3.3 6.5 9.8 14.7 40/30 40
1800 350 27405 1917 20 3.3 6.5 9.8 14.7 40/30 40
1950 350 31708 2062 20 3.2 6.5 9.7 14.6 40/30 40
2000 350 33422 2117 20 3.2 6.5 9.7 14.6 40/30 40
2100 350 36654 2217 20 3.2 6.5 9.7 14.6 40/30 40
2150 350 38157 2262 20 3.2 6.4 9.7 14.6 40/30 40
2200 350 40036 2317 20 3.2 6.4 9.7 14.6 40/30 40
2250 350 41606 2362 20 3.2 6.4 9.7 14.6 40/30 40
2300 350 43566 2417 20 3.2 6.4 9.6 14.4 40/30 40
2400 350 47245 2517 20 3.2 6.4 9.6 14.4 40/30 40
2500 350 51074 2617 25 3.2 6.4 9.6 14.4 40/30 40
2550 350 52846 2662 25 3.2 6.4 9.6 14.4 40/30 40
2600 350 55052 2717 25 3.2 6.4 9.6 14.4 40/30 40
2700 350 59179 2817 25 3.2 6.4 9.6 14.4 40/30 40
2800 350 63455 2917 25 3.2 6.4 9.6 14.4 40/30 40
2850 350 65428 2962 25 3.2 6.4 9.5 14.3 40/30 40
2900 350 67880 3017 25 3.2 6.4 9.5 14.3 40/30 40
3000 350 72455 3117 25 3.2 6.4 9.5 14.3 40/30 40
max. DN 5000
10
Stiffness rate axial for type 40 (average value by full way)
DN Overall length 0 bar 1 bar 2,5 bar 4 bar 6 bar 10 bar

mm N/mm N/mm N/mm N/mm N/mm N/mm
200 200 45 79 90 144 216 360
250 200 51 88 107 166 246 405
300 200 56 98 118 180 269 454
350 200 73 129 153 239 350 599
400 250 40 70 83 131 190 322
450 250 48 85 102 152 235 389
500 250 55 99 118 171 265 457
600 250 68 119 136 218 326 544
700 250 70 121 147 228 338 557
750 250 72 126 151 232 346 583
800 250 73 129 153 239 350 599
900 300 95 169 202 300 466 770
1000 300 136 245 291 422 656 1129
1100 350 210 399 462 756 1130 1865
1200 350 240 458 538 876 1277 2136
1400 350 245 463 532 902 1316 2193
1500 350 255 492 587 944 1403 2295
1600 350 310 597 685 1138 1668 2821
1700 350 390 662 818 1468 2142 3569
1800 350 480 926 1051 1819 2616 4416
2000 350 690 1339 1546 2512 3830 6314
2100 350 835 1607 1879 2998 4676 7690
2200 350 910 1747 2029 3367 4969 8099
2400 350 1050 1995 2363 3812 5691 9450

Attention: Variations in stiffness rate are possible by material reinforcing or production process change with +/-25%.
11
Stiffness rate lateral for type 40 (average value by full way)
DN Overall length 0 bar 1 bar 2,5 bar 4 bar 6 bar 10 bar

mm N/mm N/mm N/mm N/mm N/mm N/mm
200 200 200 330 366 428 540 616
250 200 220 370 407 475 605 686
300 200 250 425 470 545 695 783
350 200 280 482 529 610 781 882
400 250 180 315 347 400 513 576
450 250 190 338 371 420 536 604
500 250 200 330 366 428 540 616
600 250 235 388 430 503 635 724
700 250 310 521 574 670 853 967
750 250 310 527 583 676 862 970
800 250 340 585 643 741 949 1071
900 300 360 641 702 796 1015 1145
1000 300 380 673 749 956 1083 1216
1100 350 395 612 683 901 1067 1217
1200 350 440 724 783 1025 1197 1390
1400 350 480 763 878 1133 1330 1526
1500 350 530 885 1002 1261 1479 1707
1600 350 645 1109 1238 1548 1819 2090
1700 350 710 1304 1378 1723 2118 2355
1800 350 775 1418 1519 1899 2217 2519
2000 350 890 1682 1816 2225 2563 2919
2100 350 886 1692 1852 2304 2596 2835
2200 350 1050 2016 2226 2940 3150 3465
2400 350 1360 2638 3128 3944 4284 4529
Attention: Variations in stiffness rate are possible by material reinforcing or production process change with +/-25%.
12
Permissible compound expansion compensation
Compound Movements
Axial and lateral loads
effective axial
Permissible lateral = Max. lateral (1 - )
max. axial
For compound movements the axial and lateral paths are reduced
accordingly.
Example: Compensator Type 40 DN 1200

PN 10 flange according to tab. 2
Overall length 350 mm, axial movements +/-10mm
max. permissible deflection
10
Solution : Permissible lateral = 30 ( 1 - ) = 18
25
= +/- 18 mm permissible lateral load,

Installation length 335 mm
restraint compensator - design M DN 2600
13
Restraint:
TYPE 40
Under pressure the compensator bellow produces a reaction force
(in the axial direction [effective surface area x operating pressure]),
which must be absorbed by the nearest anchor-points.
For purely lateral or angular movement it is possible, with restraints

(see tie bar page 49) to relieve the anchor-points or mounting point
connections of the reaction force, so that only the adjusting forces
from the extension movement still have to be absorbed.
Restraint Hinged arrangement Restraint

Design E Design F Design M
With external tie bar pressure balanced compensator

Design K
Important Note:
Counter flanges must be designed smooth and without recesses.
The bellow must not be insulated or painted.
See installation information, page 64.
14
Type 42 is a robust, thick-walled rubber compensator with
TYPE 42
integrated corrugation produced by hand winding.
The manufacturing process makes it possible to produce this

compensator in variable overall lengths and pressure ratings.
Design:
Synthetic rubber body with various reinforcing inserts and fully
strengthened rubber flanges with or without steel insert. The
rubber flange is self-sealing so that no additional gasket is
required.
Details for type 42
Bellows Bellow design Permissible Electrical Hardness

colour code operating data resistance shore A
(inner) material (outer) bar °C [Ohm cm]
red EPDM Nylon cord EPDM 8 90 7 x 102 60
red/red EPDM Aramide EPDM 80 130 60
yellow NBR Nylon cord CR 8 90 5 x 103 60
yellow/blue NBR Aramide CR 80 100 60
green CSM Nylon cord CSM 8 90 4 x 104 65
white NBR/white Nylon cord CR 10 80 5 x 10 3
55
lilac FPM Kevlar EPDM 10 150 65
Burst pressure > 30 bar,
Suitable for vacuum 0.7 bar absolute, full vacuum with supporting ring.
Flange:
Both sides with pressure-strengthened solid rubber flan-
ges, drilled according to specific requirements with one-
piece steel backing flanges of material S 235 JRG 2
(R-St 37-2) with corrosion protection.
Design I with loose backing flanges

Design II with vulcanized backing flanges
Design III with loose backing flanges and
supporting collar
Design IV with vulcanized backing flanges and in Design I Design II
the bellow vulcanized steel rings
Note:
For aggressive media, see resistance table.
The bellow must not be painted or insulated.

See installation information in Annex.
Design III Design IV
15
DN Standard Variable t Movement absorption Standard Max.
overall length overall length rubber for the standard pressure pressure
and steel ∠ ±°
ax + ax - lat ±
mm mm mm mm mm mm bar bar
50 2" 150 150 - 500 25 10 20 10 10.0 10 80

65 2 1/2" 200 150 - 500 25 10 20 20 10.0 10 80
80 3" 200 150 - 500 25 10 20 20 10.0 10 80
100 4" 200 150 - 500 25 10 25 20 10.0 10 80
125 5" 200 150 - 500 25 10 25 20 10.0 10 50
150 6" 200 150 - 500 25 10 25 20 10.0 10 50
175 7" 200 150 - 500 25 15 25 20 10.0 10 50
200 8" 200 150 - 500 25 15 25 20 10.0 10 50
225 9" 200 200 - 500 25 15 25 20 10.0 10 50
250 10" 200 200 - 500 25 15 25 20 8.0 10 40
300 12" 200 200 - 500 25 15 25 20 8.0 10 40
350 14" 250 200 - 500 25 15 30 25 5.0 10 40
400 16" 250 200 - 500 25 15 30 25 8.0 10 40
450 18" 250 200 - 500 25 30 30 25 8.0 10 40
500 20" 250 200 - 500 25 30 30 25 7.0 10 40
550 22" 250 200 - 500 25 30 30 25 7.0 10 40
600 24" 250 200 - 500 25 30 30 25 5.0 10 40
650 26" 250 200 - 500 25 30 30 25 5.0 10 40
700 28" 250 200 - 500 25 30 30 25 4.0 10 40
750 30" 250 200 - 500 25 30 30 25 4.0 10 40
800 32" 300 250 - 500 32 30 30 25 4.0 10 40
850 34" 300 250 - 500 32 30 30 25 4.0 10 40
900 36" 300 250 - 500 32 30 30 25 3.0 10 40
1000 40" 300 250 - 500 32 30 30 25 3.0 10 40
1050 42" 350 250 - 500 32 30 35 25 3.0 10 20
1100 44" 350 250 - 500 35 30 35 25 3.0 10 20
1150 46" 350 250 - 500 35 30 35 25 3.0 10 20
1200 48" 350 250 - 500 35 30 35 25 2.5 10 20
1250 50" 350 250 - 500 35 30 35 25 2.5 10 20
1300 52" 350 250 - 500 35 30 35 25 2.5 10 20
1350 54" 350 250 - 500 35 30 35 25 2.5 10 20
1400 56" 350 250 - 500 35 30 35 25 2.0 10 20
1500 60" 350 250 - 500 35 30 35 25 2.0 10 20
1600 64" 350 250 - 500 35 30 35 25 2.0 10 20
1700 68" 350 250 - 500 35 30 35 25 1.5 10 20
1800 72" 350 250 - 500 35 30 35 25 1.5 6 20
1900 76" 350 250 - 500 35 30 35 25 1.3 6 20
2000 80" 350 250 - 500 35 30 35 25 1.3 6 20
2100 84" 350 250 - 500 40 30 35 25 1.2 6 20
2200 88" 350 250 - 500 40 30 35 25 1.2 6 20
2300 92" 350 250 - 500 40 30 35 25 1.0 6 20
2400 96" 350 250 - 500 40 30 35 25 1.0 6 20
2500 100" 350 250 - 500 40 30 35 25 0.8 4 20
2600 104" 350 250 - 500 40 30 35 25 0.8 4 20
2800 112" 350 250 - 500 40 30 35 25 0.7 4 20
3000 120" 350 250 - 500 40 30 35 25 0.7 4 20
3200 128" 350 250 - 500 40 25 30 20 0.6 4 20
3400 136" 350 250 - 500 50 25 30 20 0.6 4 20
3500 140" 350 250 - 500 50 25 30 20 0.5 4 20
3600 144" 350 250 - 500 50 25 30 20 0.5 4 16
3800 152" 350 250 - 500 50 25 30 20 0.4 4 16
4000 160" 350 250 - 500 50 25 30 20 0.4 4 16
*Note: Our bellows, type 42, are manufactured in four different flange designs. The pressure indicated in the chart is the max. possible manufac-
turing technical operating pressure. However, the bellows are manufactured specifically to the operating pressure stated in the order.
16
Type 45 is a low corrugated rubber compensator with good
TYPE 45
noise absorbing characteristics and high expansion absorption
in all three planes. Because of its low corrugation, with
outstanding noise and vibration absorbing qualities as well
as high expansion absorption in all directions a very low
adjusting force is possible.
Design
Low two-corrugated rubber bellow with nylon-reinforcing
inserts and integral sealing bead (therefore - self-sealing
without additional gasket) for accommodating three-piece
unions (DIN 2999 conical). Available with or without
solid-ring between the corrugations externally.
Connections
Type 45 red both sides: With malleable cast iron, galvanized unions
Type 45 blue both sides: With red brass/brass or high-grade steel
unions
Type 45 blue with drinking water approval acc. to KTW
Details for type 45
Bellow Core Reinforcing Cover Permissible operating data Vacuum Hardness

colour code inner material outer shore A
bar °C bar °C bar °C
red EPDM Nylon EPDM 10 -20 10 90 6 95 0.5 bar abs. 60

blue EPDM Tw Nylon EPDM 10 -20 10 90 6 95 0.5 bar abs. 60
Bellow Connection Movement absorption Weight

DN Overall length ØA GL SW1 SW2 R ax + ax - lat ± ∠±
mm mm mm mm mm inch mm mm mm ° kg
20 155 39 200 50 33 3/4 6 22 22 45 0.7
25 140 49 200 62 40 1 6 22 22 45 1.1
32 140 55 200 73 50 1 1/4 6 22 22 45 1.5
40 130 63 200 82 56 1 1/2 6 22 22 45 1.9
50 120 76 200 95 70 2 6 22 22 45 2.6
For installation information, see page 59
17
Type 46, in a low corrugated high pressure design, is suitable
TYPE 46
for sanitary, heating, air-conditioning and swimming pool use,
as well as for solar technology. Also for apparatus, pipeline and
motor construction.
It absorbs thermal expansions and vibration, compensates for

axial and lateral movements, and is resistant to chemical and
mechanical stresses.
Approvals:
Type 46 red/St. and red/Sp with TÜV approval for heating systems
in accordance with DIN 4809.
PED 97/23/EG
Details for type 46
Bellow Bellow design Permissible operating data Electrical Hardness

colour code resistance shore A
bar °C bar °C bar °C Ohm cm
(inner) material (outer)
red/Sp EPDM Aramide EPDM 16 50 10 100 6 110 7 x 102 60
red/St EPDM Steel cord EPDM 16 50 10 100 6 110 7 x 102 60
blue IIR Nylon cord EPDM 10 50 8 70 6 85 7 x 10 2
55
grey CR Nylon cord CR 16 70 5 x 10 10
60
red EPDM Nylon cord EPDM 16 50 12 70 10 90 7 x 102 65
white NBR Nylon cord CR 16 50 12 70 10 80 5 x 10 3
60
Burst pressure >50 bar, suitable for 0.5 bar abs.
Construction:
Low corrugated rubber expansion joint with reinforcing Bracing:
inserts and built-in sealing profile with rear mounted female Under pressure the compensator bellow
thread for mating to threaded connecting pieces, with male develops a reaction force in the axial direction.
or female threaded joints. This force has to be reduced by adequate
anchor points or restraints fastened on the
The compensator bellow bead is self-sealing. piping.
No additional gaskets are required.

(Seal threaded joints in piping as usual)
Connecting pieces:
Type 46 white:
Malleable cast iron, galvanized union nut with MS or RG Important note:
thread. Ensure torsion-free installation.
Other types 46: The bellow must not be insulated or painted.
Union nut and screw-in parts from galvanized malleable
cast iron. For installation information, see page 59.
Special connections in stainless steel are possible.
18
Application:
TYPE 46
Type 46 For heating systems, in acc. with
DIN 4809 Type 46 For chemical plants
red aramide With corrosion-protected aramide inserts. green For heavy chemical use up to 16 bar
red-steelcord For long service life in heating and hot working pressure. Permissible
water at 100°C/110°C and 10 bar/6 bar temperature, working pressure and life
pressure for 10 year service life. Not expectancy depend in individual cases
suitable for oil-related media. on medium and concentration.
Resistance table on request.
blue nylon For cold and hot water (up to 85°C), Type 46 For oil, fuel, gas
6
also with the addition of chemicals for yellow Electroconductive, R = 103 up to 10 Ohm.
water treatment. Industrial water, acids, yellow- Application: town- and natural gas.
lyes, alcohols, esters and ketones. steel cord Blast-furnace, fuels, lubricants, heating
Not suitable for oil-related media. oil, cooling water emulsions.
Type 46 For food processing and beverage

white industry Type 46 For water pipes
Also suitable for oil-related and fatty grey For cold and warm water, washing water,
foodstuff. Suitable up to +80°C. sea water, swimming pool water waste
water (also oil-related, weak acid or
Type 46 For warm water alkaline with CR).
red For cold and hot water (up to 90°C), also
with the addition of chemicals for water
treatment. Industrial water, acids, lyes,
alcohols, esters and ketones.
Bellow Overall Width across

Expansion absorption Expansion absorption Weight
length Flats up to 70°C over 70°C
Overall Effec. Des. Des.
DN length ØA surface R GL1 GL2 SW1 SW2 SW3 axial lat. ∠° axial lat. ∠° 2 1
+ - +/- + - +/-
mm mm cm2 thread mm mm mm mm mm mm mm mm +/- mm mm mm +/- kg kg
20 130 55 8 3/4” 228 186 36 80 48 15 30 10 30 10 15 8 30 0.70 0.60

25 130 65 12 1” 236 192 40 80 54 15 30 10 30 10 15 8 30 1.00 0.80
32 130 78 18 1 1/4” 240 190 48 80 66 15 30 10 30 10 15 8 30 1.50 1.20
40 130 90 27 1 1/2” 246 196 53 90 74 15 30 10 30 10 15 8 30 1.70 1.40
50 130 109 42 2” 254 200 66 110 90 15 30 10 30 10 15 8 30 2.60 2.20
19
TYPE 48
Type 48 is a high corrugation rubber compensator with
very good noise absorbing characteristics and high
expansion absorption in all three planes.
Design
High corrugated rubber bellow with reinforcing inserts
and integral sealing bead (therefore self-sealing without
additional gasket) to suit the steel-backed swivel flanges
with solid ring support. The flanges are provided with
through-holes (PN6, PN10, PN16, ASA150 lbs, etc.).
All steel parts in S235 JRG2 (RSt 37-2) are zinc-plated
and yellow passivated.
Other specifications in acc. with DIN, ASA, BS Special

flanges are available. (PN6, PN10, PN16, ASA 150 lbs
or others).
All steel parts in S 235 JRG2 (RSt 37-2) are zinc plated
and yellow passivated.
Details for type 48
Bellow Core Reinforcing Cover Permissible operating pressure Electrical Hardness

colour code inner material outer resistance shore A
bar °C bar °C bar °C [Ohm cm]
red EPDM Sp. Cord EPDM 16 50 10 70 6 100 7*104 55

grey CR Nylon cord CR 16 50 12 70 10 70 5*108 60
Type 48 red for hot water plants and lyes
Type 48 grey for waste water- and cooling water plants
Bellow Flange PN 10 Movement absorption

DN Overall length ØA ØD ØPC Ød n s ax + ax - lat ± ∠± ØC
mm mm mm mm mm mm mm mm mm °
50 150 135 165 125 18 4 16 25 25 20 30 96
65 150 150 185 145 18 4 16 25 25 20 30 116
80 150 170 200 160 18 8 18 25 25 20 30 133
100 155 200 220 180 18 8 18 40 30 25 30 153
150 155 250 285 240 23 8 20 45 35 25 20 203
200 160 295 340 295 23 8 20 45 35 25 20 261
250 160 345 395 350 23 12 20 45 35 25 20 310
Special designs
With tie-rods design B as axial stroke limitation and for absorption
of the reaction forces. With tie-rods design C as axial stroke - and
thrust limitation, tie-rods beared in rubber bushes.
20
TYPE 49
Manufactured by Continental
Type 49 is a heavy duty rubber compensator of a highly flexible

design. Its high corrugation allows an extremely short overall length
with excellent noise and vibration absorbing characteristics as well as
high expansion absorption in all directions at very low movement
forces.
Design:
High corrugated bellow body with integral sealing profile (therefore
self-sealing without additional gasket) for mating with swivel flanges.
The flanges are provided with threaded holes as the bellow is sup-
ported on the flange.
Details for type 49
Bellow Design of the bellow Permissible operating data Electrical Hardness

(inner) material (outer) bar* °C bar* °C bar °C [Ohm m]
red EPDM Nomex EPDM 20/25 50 16/20 70 6 110 1 x 104 60

blue IIR Nylon cord EPDM 20/25 50 16/20 70 10 90 7 x 10 7
55
yellow NBR Nylon cord CR 20/25 50 16/20 70 10 90 8 x 103 65
white NBR white Nylon cord CR 20/25 50 16/20 70 10 80 5 x 10 3
60
green CSM Nylon cord CSM 20/25 50 16/20 70 10 90 7 x 1010 65
**)black IIR Nylon cord EPDM 10 50 8 70 6 85 7 x 10 7
55
Suitable for vacuum up to 0.8 bar abs. without supporting ring (2 m suction) *) to DN80 / from DN 100
Suitable for vacuum up to 0 bar abs. with supporting ring (10 m suction) **) DN 32 - DN 200, burst pressure > 80 bar
All compensators can be delivered with earthing straps.
Type A Flange: (Design A)

Swivel flanges on both sides with integral rubber
profile, so that an additional gasket is not required
(self-sealing). The flange holes are DIN PN 10
standard, with threaded bolt-holes. Other flange
specifications in accordance with DIN, ASA, BS.
Special flanges are also available.
The flange is produced with appropriate threaded

holes; through-bolts cannot be used.
Approvals: Flange material: Standard S 235 JRG2

Type 49 A-red with TÜV/DIN 4809 (RSt37-2) zinc plated and
for heating installation, Technical yellow passivated.
Control Number 3 E001
Type 49 white with quality assurance as per DIN 7725 Other materials available on request.
Suitable for foodstuff - RAL-C 53
Type 49 blue with Drinking Water Approval RAL-C 52
and 1986 Federal Health Bureau KTW
Rubber Commitee
Type 49 all Ship Licence with or without flame

protective cover, depending on PED 97/23/EG
installation location.
21
Application:
TYPE 49
Type 49 For heating systems, as per DIN 4809
A-red For continuous duty in warm and hot water heating at
100 °C/110 °C and 10bar/6bar working pressure over life.

blue For cold and warm water, also with the addition of
chemicals for water treatment. Industrial water, acids,
lyes, alcohols, esters and ketones. Not suitable for
oil-related media.
Type 49 For the food and beverage industry

white Also suitable for oil- and fat-containing foodstuff.

green For heavy chemical use.
Type 49 For oil, fuel, gas

yellow Application range: natural and town gas, blast furnace
gas, fuels, lubricants, heating, cooling water emulsions.
Type 49 For water pipes

black For cold and warm water, water with detergents,
sea water, swimming pool water, waste water.
Overall Bellow Flange PN 10 Movement absorption Weight

length Eff.
DN ØA
surface ØD ØPC Ød n s axial lat. ∠°* ØC
+ - +/-
mm mm cm2 mm mm mm mm mm mm +/- mm kg
32 100 110 18 140 100 M16 4 16 20 30 30 7 79 3.0
40 100 110 18 150 110 M16 4 16 20 30 30 7 79 3.6
50 100 120 35 165 125 M16 4 16 20 30 30 7 89 4.4
65 100 135 56 185 145 M16 4 16 20 30 30 7 104 5.3
80 100 150 87 200 160 M16 8 18 20 30 30 7 119 6.5
100 100 170 130 220 180 M16 8 18 20 30 30 7 142 7.3
125 100 195 190 250 210 M16 8 18 20 30 30 7 169 8.9
150 100 260 263 285 240 M20 8 20 20 30 30 7 195 12.3
175 100 285 334 315 270 M20 8 20 20 30 30 7 220 16.2
200 100 310 416 340 295 M20 8 20 20 30 30 7 245 16.2
250 100 360 607 395 350 M20 12 20 20 30 30 7 295 20.3
300 100 410 830 445 400 M20 12 20 20 30 30 7 345 23.1
350 100 460 1100 505 460 M20 16 20 20 30 30 7 396 30.1
400 110 515 1385 565 515 M24 16 25 20 30 30 7 450 43.2
500 110 615 2091 670 620 M24 20 25 20 30 30 7 550 53.8
Permissible % of indicated movement relative to temperature: * Only valid for an assembly shortened
up to 50°C ~ 100% by about 10 mm (90/100mm).
up to 70°C ~ 80%
up to 90°C ~ 70%
Accessories:
Note: Tie bar/Restraints See page 49
For aggressive media please refer to the resistance table. Deflector sleeve See page 51
The bellow must not be painted or insulated. Flameproof protective covers See page 51
See further installation information in Annex. Earth Covers See page 52
22
Tie bar (Standard Designs B + C)
TYPE 49
Since the rubber bellow is a soft flexible component, it must be
observed that under pressure the compensator will always try
to move in the axial direction because of its reaction force
(cross section area x working pressure).
It must be ensured by constructive measures on the piping

(roller bearing, restraining or anchor points) or tie bars
directly on the compensator that any over-extension of the
bellow is avoided.
See our range of tie bars on pages 49 + 50.
Design B Design C
Flange shapes for tie bars as per designs B and C at 10 bar
DN 25 - 200 DN 250 - 500
DN Main dimension for PN 10

Overall length s A ØB
mm mm mm mm
32 100 16 230 140
40 100 16 240 150
50 100 16 255 165
65 100 16 275 185
80 100 18 290 200
100 100 18 310 220
125 100 18 340 250
150 100 20 375 285
175 100 20 405 315
200 100 20 440 340
250 100 20 509 395
300 100 20 559 445
350 100 20 619 505
400 110 25 700 565
500 110 25 810 670
23
TYPE 49
Vacuum Supporting Rings Bolt Packs SU

WILLBRANDT type 49 compensators
are suitable for vacuum. To prevent Hexagon bolts according to DIN 933/8.8
the compensator bellow being drawn Washers DIN 125
together by suction at negative
pressure, the insertion of a vacuum Selected bolt packs are available for
supporting ring is necessary for a connecting type 49 compensators to piping,
pressure above 2m (0.8bar abs., so that by using DIN flanges, the bolt lengths
20% negative pressure). are flush with the compensator bellow.
For installation, ensure smooth, burr-free

DN Art-No.
surfaces on the rubber bellow using the
32 / 40 2149305132
U-washers for length correction (place under
50 / 65 2149305150
bolt head).
80 / 100 / 125 2149305212
150 2149305215
175 / 200 2149305217
250 2149305225
300 2149305230
350 2149305235
400 2149305240
500 2149305250
Contents
Bolt pack Quantity Bolts Quantity U-Washers
kg DIN 933/8.8 Ø
SU 1 0.35 8 M 12X30 8 13
SU 2 0.62 8 M 16X30 8 17
SU 3 0.67 8 M 16X35 8 17
SU 4 0.68 8 M 16X35 16 17
Accessory bolt packs
SU 5 1.4 16 M 16X35 16 17
DIN-Norms SU 6 1.5 16 M 16X40 17
DN 16
PN6 PN10 PN16 SU 7 1.55 16 M 16X40 17
32
32 SU 1 SU 2 SU 2 SU 8 2.6 16 M 16X45 16 17
40 SU 1 SU 2 SU 2 SU 9 2.4 24 M 16X45 48 17
50 SU 1 SU 3 SU 3 SU 10 2.7 16 M 20X45 16 21
65 SU 1 SU 3 SU 3 SU 11 4.1 24 M 20X45 24 21
80 SU 4 SU 7 SU 7 SU 12 4.2 24 M 20X45 48 21
100 SU 4 SU 7 SU 7 SU 13 4.3 24 M 20X50 48 21
125 SU 5 SU 6 SU 6 SU 14 4.2 24 M 20X50 24 21
150 SU 6 SU 10 SU 10 SU 15 5.8 32 M 20X50 64 21
175 SU 6 SU 10 SU 10 SU 16 7.3 40 M 20X50 80 21
200 SU 8 SU 10 SU 11 SU 17 6.7 24 M 24X50 48 25
250 SU 9 SU 13 SU 17 SU 18 6.6 24 M 24X50 24 25
300 SU 11 SU 14 SU 18 SU 19 9.3 32 M 24X55 64 25
350 SU 12 SU 15 SU 19 SU 20 11.7 40 M 24X55 80 25
400 SU 15 SU 19 SU 21 SU 21 13.5 32 M 27X60 64 28
500 SU 16 SU 20 SU 22 SU 22 22.0 40 M 30X60 80 31
24
Manufactured by Continental
TYPE 50
Type 50 is a low corrugated bellow compensator with good sound insulating
characteristics for structure and liquid-borne noise. It is characterized by a very
high expansion capability, particularly in the angular plane.
Design:
Low corrugated rubber bellow with reinforcing inserts and integral sealing bead
(therefore self-sealing without additional gaskets) for accommodating the swivel
flanges.
The flanges are provided with through holes.
Details for type 50
Bellow Bellow design Permissible operating data Electrical Hardness

Core Reinforcing Cover bar °C bar °C bar °C
(inner) material (outer) *) **) ***) [Ohm m]
red - aramide EPDM Aramide EPDM 16 70 10 100 6 110 1 x 104 60
red IIR Nylon cord EPDM 16 50 12 80 10 90 7 x 107 55
white NBR Nylon cord CR 16 50 12 70 10 90 5 x 108 65
orange NBR Nylon S CR 20 20 25 50 16 70 8 x 103 60
yellow-steel cord NBR Steel cord CR 16 50 12 70 10 100 5 x 1011 60
black/CR CR Nylon cord CR 16 50 10 70 - - 1 x 1011 60
black/EPDM IIR Nylon cord EPDM 10 50 8 70 6 85 7 x 107 55
Suitable for vacuum up to 0.8bar abs., without supporting ring (2 m suction) *) DN 700 - 1000 = 10 bar
Suitable for vacuum up to 0bar abs., with supporting ring (10 m suction) **) DN 700 - 1000 = 8 bar
All compensators can be delivered with earthing straps. ***) DN 700 - 1000 = 6 bar
Burst pressure DN 20 - 600 > 48 bar
Burst pressure DN 700 - 1000 > 30 bar
Type A
Approvals:
Type 50 with TÜV/DIN approval, DIN 4809
red-aramide for heating installation,
Technical Control Number 3 E 003
Type 50 red with Drinking Water Approval in
Flanges: (Design A) accordance with 1986 Federal health
Swivel flanges both sides (Design A) with integral rubber Bureau KTW Rubber Committee
profile, so that additional gaskets are not required (self- Type 50 white with quality assessment in accordance
sealing). with DIN 7725 - suitable for foodstuff -
The flanges are drilled acc. to DIN PN 10 as standard. Type 50 all Marine Approval with or without flame
Other specifications in accordance with DIN, ASA, BS. protective cover.
Flange material: Standard S 235 JRG2 (RSt 37-2) zinc
plated and yellow passivated.
Other materials available on request.
(Flanges up to DN 200 are in some cases made with

forged collars for the bellow side).
25
Application:
TYPE 50
Type 50 For heating systems, as per DIN 4809.
red With corrosion-proofed aramide inserts. Type 50 For oil, fuel, gas
aramide For continuous duty in hot water heating and high yellow Electroconductive, R = 103 to
temperature water central heating at 100°C / 110°C yellow- 106 Ohm.
and 10bar / 6bar working pressure over a 10 year steel cord Application range: natural and
working life. Not suitable for oil-related media. town gas, blast furnace gas,
fuels, lubricants, heating oil,
Type 50 For drinking water / hot water cooling water emulsions.
red nylon For cold and hot water (up to 90°C), also with the
addition of chemicals for water treatment. Industrial Type 50 For water pipes
water, acids, lyes, alcohols, esters and ketones. black/CR For cold and hot water, water
Not suitable for oil-related media. black/ with detergents, sea water,
EPDM swimming bath water, waste
Type 50 For the food and beverage industry water with CR (also oil-related,
white Also suitable for oil- and fat-containing foodstuff. weak acid or alkaline)
May be used up to +90°C.
(In EPDM only available up to DN 150)
green For heavy chemical use up to 16 bar working pressure.
Permissible temperature, working pressure and life
expectancy depend in individual cases on medium and
concentration. Resistance table on request.

orange Electroconductive, R = 8 x 103 Ohm.
Application range: Natural and town gas, blast furnace
gas, liquid gas acc. to DIN 51622, fuels, lubricants,
heating oil, cooling water emulsion.
For standard types With steel cord

Bellow Flange PN 10 Movement absorption Movement absorption
Overall Effective
DN length ØA surface ØD ØPC Ød n s ØC axial lat. ∠° axial lat. ∠°
+ - +/- +/- + - +/- +/-
mm mm cm2 mm mm mm mm mm mm mm mm mm mm mm mm
20 130 81 17 105 75 12 4 14 65 30 30 30 30 - - - -
25 130 81 17 115 85 14 4 14 65 30 30 30 30 - - - -
32 130 81 17 140 100 18 4 15 65 30 30 30 30 15 30 10 30
40 130 86 18 150 110 18 4 15 74 30 30 30 35 15 30 10 30
50 130 96 32 165 125 18 4 16 86 30 30 30 30 15 35 10 30
65 130 111 53 185 145 18 4 16 105 30 30 30 30 15 35 10 25
80 130 122 85 200 160 18 8 18 118 30 30 30 30 15 15 10 25
100 130 142 128 220 180 18 8 18 137 30 30 30 20 15 15 10 20
125 130 168 187 250 210 18 8 18 166 30 30 30 20 15 15 10 20
150 130 192 259 285 240 22 8 18 192 30 30 30 20 15 15 10 15
200 130 252 410 340 295 22 8 20 252 30 30 30 12 15 15 10 10
250 130 302 596 395 350 22 12 20 304 30 30 30 12 15 15 10 5
300 130 354 822 445 400 22 12 22 354 30 30 30 12 15 15 10 5
350 200 420 907 505 460 22 16 24 412 30 50 30 8 - - - -
400 200 480 1018 565 515 26 16 25 470 30 50 30 8 - - - -
500 200 580 1692 670 620 26 20 30 570 30 50 30 8 - - - -
600 200 680 3078 780 725 30 20 30 675 30 50 30 8 - - - -
700 250 800 4019 895 840 30 24 35 780 30 50 30 8 - - - -
800 250 880 5436 1015 950 33 24 40 887 30 50 30 6 - - - -
900 300 1038 6706 1115 1050 33 28 40 985 30 50 30 5 - - - -
1000 300 1138 8231 1230 1160 36 28 40 1085 30 50 30 5 - - - -
up to 50°C ~ 100%
up to 70°C ~ 75%
up to 90°C ~ 60%
26
Stiffness rate axial for type 50 (average value by full way)
DN Overall length 0 bar 2,5 bar 4 bar 6 bar 10 bar

mm N/mm N/mm N/mm N/mm N/mm
50 130 25 51 98 134 173

65 130 24 53 100 150 190
80 130 28 58 104 148 185
100 130 35 71 116 206 274
125 130 36 71 137 214 282
150 130 49 102 189 293 390
200 130 100 180 365 568 735
250 130 105 207 388 609 778
300 130 123 248 448 658 883
350 200 105 177 349 567 753
400 200 154 261 516 535 1090
450 250 167 320 581 903 1162
500 200 196 376 686 1060 1364
600 200 208 292 692 1123 1441
700 250 140 198 521 714 954
800 250 180 270 594 975 1258
900 300 200 380 690 1080 1395
1000 300 225 420 742 1248 1568
Stiffness rate lateral for type 50 (average value by full way)
DN Overall length 0 bar 2,5 bar 4 bar 6 bar 10 bar

mm N/mm N/mm N/mm N/mm N/mm
50 130 50 65 80 105 145

65 130 40 78 115 150 165
80 130 35 74 136 155 173
100 130 55 88 143 168 192
125 130 100 200 261 293 383
150 130 120 260 309 366 466
200 130 323 723 836 949 1219
250 130 379 806 1022 1173 1479
300 130 392 837 1068 1216 1542
350 200 305 610 762 875 1098
400 200 338 642 817 946 1199
450 250 342 639 821 971 1200
500 200 426 818 1048 1204 1495
600 200 456 834 1062 1295 1586
700 250 516 939 1191 1449 1775
800 250 558 960 1055 1557 1758
900 300 800 1480 1984 2248 2560
1000 300 960 1824 2361 2736 2976
Attention: Variations in stiffness rate is possible by material reinforcing or production process change with +/-25%.
27
Tie bar (Standard designs B and C)
TYPE 50
Since the rubber bellow is a soft flexible component, under
pressure the compensator will always try to move in the axial
direction because of its reaction force (bellow cross section
area x working pressure).
It must be ensured by constructive measures on the piping

(roller bearing, restraining or anchor points) or tie bars
directly on the compensator that any over-extension of the
bellow is avoided. See tie bar range on pages 49 and 50.
Design B Design C
Vacuum supporting ring in 1.4571 Flange shapes for tie bars as per designs B and C
DN Art-No.
350 2150315235
400 2150335240
500 2150315250
600 2150315260
700 2150315270
800 2150315280
900 2150315290
1000 2150315310
DN 25 - 200 DN 250 - 900 (1000) DN 1000
Vacuum supporting ring

WILLBRANDT type 50 compensators are vacuum- resistant.
To prevent the compensator bellow being drawn together
by suction at negative pressure, the insertion of a vacuum
supporting ring is necessary for a suction value above 2 m
(0.8 bar abs., 20% negative pressure).
DN Art-No.
50 2150315150
65 2150305180
80 2150305180
100 2150305210
125 2151305212
150 2150305215
200 2151305220
250 2151305225
300 2151305230
Note:
For aggressive media, see resistance table.
Further installation information is provided in the Annex.
Application example for a gimbal flange
design for joint pipe angulation DN 300 Accessories:
Tie bar/Restraints See page 49
Deflector sleeve See page 51
Flameproof protection cover See page 51
Earth cover See page 52
28
Type 50 PTFE chemical design
TYPE 50
Type 50 in a special design has a PTFE foil liner for effective resistance against
aggressive chemicals.
The PTFE liner is suitable for all commonly used liquids; attention
should be paid to heat resistance. The compensator should only be
used in higher pressure ranges (up to max. 6 bar); not safe for
vacuums.
A special PTFE supporting ring is available for vacuums, but only for
DN 65-300.

Overall Eff. axial / lateral
DN length ØA surface ØD ØPC Ød n s ØC
+ - +/- ∠°
25 130 81 17 115 85 14 4 14 15 15 15 15 65
32 130 81 17 140 100 14 4 15 15 15 15 15 65
40 130 86 18 150 110 18 4 15 15 15 15 15 74
50 130 96 32 165 125 18 4 16 15 15 15 15 86
65 130 111 53 185 145 18 4 16 15 15 15 15 105
80 130 122 85 200 160 18 8 18 15 15 15 15 118
100 130 142 128 220 180 18 8 18 15 15 15 10 137
125 130 168 187 250 210 18 8 18 15 15 15 10 166
150 130 192 259 285 240 22 8 20 15 15 15 10 192
200 130 252 410 340 295 22 8 20 15 15 15 6 252
250 130 302 596 395 350 22 12 20 15 15 15 6 304
300 130 354 822 445 400 22 12 20 15 15 15 6 354
400 200 480 1579 565 515 26 16 25 15 15 15 4 470
500 200 580 2186 670 620 26 20 30 15 15 15 4 570
600 200 680 3076 780 725 30 20 30 15 15 15 4 675
800 250 880 5436 1015 950 33 24 40 15 15 15 3 887
29
WILLBRANDT Rubber Compensator Type 51 lilac
Type 51 lilac is a special type similar to the 50 series and is
TYPE 51
manufactured by a special process.
Suitable for chemical plants, particularly for higher thermal

duty up to about 180°C.
The highest permissible duty depends on temperature, pressure,

movement and life expectancy.
Note: The bellow must not be painted or insulated.
Bellow Bellow design Permissible working

colour data
code Core Reinf. Cover
(inner) material (outer) bar °C bar °C bar °C
lilac/red FPM Aramide EPDM 25 50 16 120 4 150

lilac FPM Aramide CR 25 50 16 100 6 120
Burst pressure > 50 bar

Suitable for vacuum up to 8.0 bar abs., without supporting ring (2 m suction).
Suitable for vacuum up to 0 bar abs., with supporting ring (10 m suction).
Overall Bellow Flange PN 10 Movement absorption

DN length ØA Eff. ØD ØPC Ød n axial lat. ∠° ØC
s
surface + - +/- +/-
mm mm cm 2
mm mm mm mm mm mm mm mm
50 130 96 32 165 125 18 4 16 10 20 15 20 89
65 130 110 53 185 145 18 4 16 10 20 15 20 104
80 130 122 85 200 160 18 8 18 15 20 15 20 119
100 130 142 128 220 180 18 8 16 15 20 15 20 142
125 130 170 187 250 210 18 8 18 15 20 15 20 169
150 130 196 259 285 240 23 8 18 15 20 15 20 195
200 130 256 409 340 295 23 8 20 15 20 15 15 245
250 130 306 599 395 350 23 12 20 15 20 15 10 295
300 130 353 822 445 400 23 12 22 15 20 15 10 348
350 200 442 1080 505 460 22 16 24 15 20 15 10 398
400 200 495 1379 565 515 26 16 25 20 25 20 8 450
500 250 595 2038 670 620 26 20 30 20 25 20 6 563
600 250 695 3286 780 725 30 20 30 20 25 20 6 673
700 250 800 4019 895 840 30 24 30 30 30 30 6 780
800 250 880 5436 1015 950 33 24 30 30 30 30 5 887
900 300 1038 6706 1115 1050 33 28 30 30 30 30 4 985
1000 300 1138 8231 1230 1160 36 28 30 30 30 30 4 1085
30
Type 53 is a low corrugated bellow compensator with good
TYPE 53
sound insulating characteristics. It is characterized by a very
high expansion capability in all three planes.
Design:
integral sealing bead (therefore - self-sealing without additional
gaskets) for accommodating the steel-backed swivel flange with
solid ring support.
The flanges are provided with through holes
(PN 6, PN 10, PN 16, ASA150 lbs, etc.).
All steel parts in S 235 JRG2 (RSt 37-2) are zinc plated and
passivated.
Details for type 53
Bellow Core Reinforcing Cover Permissible operating data Hardness

colour code (inner) material (outer) shore A
bar °C bar °C bar °C
red/blue IIR-D Aramide EPDM 25 80 16 120 10 130 60

yellow /blue NBR Aramide CR 25 50 16 90 10 120 65
green/blue CSM Aramide CSM 25 50 16 90 10 120 65
Suitable for vacuum up to 8.0 bar abs., without supporting ring.
Suitable for vacuum up to 0 bar abs., with supporting ring.
Design A

DN Overall length ØA ØD ØPC Ød n s ax + ax - lat ± ∠± ØC
mm mm mm mm mm mm mm mm mm °
32 130 81 140 100 18 4 15 10 20 15 20 65
40 130 86 150 110 18 4 15 10 20 15 20 74
50 130 96 165 125 18 4 15 10 20 15 20 86
65 130 110 185 145 18 4 15 10 20 15 20 105
80 130 122 200 160 18 8 15 15 20 15 20 118
100 130 142 220 180 18 8 15 15 20 15 20 137
125 130 170 250 210 18 8 18 15 20 15 20 166
150 130 196 285 240 23 8 18 15 20 15 20 192
200 130 256 340 295 23 8 20 15 20 15 15 252
250 130 306 395 350 23 12 20 15 20 15 10 304
300 130 356 445 400 23 12 22 15 20 15 10 354
Special designs
With tie-rods design B as axial stroke limitation
and for absorption of the reaction forces. With
tie-rods design C as axial stroke - and thrust
limitation, tie-rods supported in rubber bushes.
Design C Design B
31
WILLBRANDT Rubber Compensator Type 54 yellow
TYPE 54
Type 54 yellow is a low corrugated bellow compensator
with good sound insulating characteristics. It is characteri-
zed by a very high expansion capability in all three planes.
Design:
integral sealing bead (therefore - self-sealing without
additional gasket) for accommodating steel-backed swivel
flanges with solid ring support. The flanges SAE 3000 are
provided with through holes.
All steel parts in S235JRG2 (R St 37-2) are zinc-plated

and passivated.
Note: The flanges are also available in other standards,

e.g. DIN PN 6, 10, 16 or ASA150 lb.
Details for type 54 yellow
Bellow Core Reinforcing Cover Permissible operating data Electrical Hardness

colour code (inner) material (outer) resistance shore A
bar °C bar °C bar °C [Ohm cm]
yellow NBR Nylon CR 10 50 10 80 5*104 60

Bellow Flange SAE 300 Movement absorption

DN Overall length Ødi A B D E Ød n s ax + ax - lat ± ∠± ØC
nmm mm mm mm mm mm mm mm mm mm mm ° mm
25/1“ 65 24 70 55 52.4 26.2 11 4 11 10 20 10 7.5 46
32/1 1/4“ 65 32 80 70 58.7 30.2 13 4 11 10 20 10 7.5 53
40/1 1/2“ 100 40 90 80 70.0 35.7 13 4 13 10 20 10 10.0 64
50/2“ 100 50 100 90 77.8 42.9 13 4 13 10 20 10 10.0 73
65/2 1/2“ 100 65 115 105 89.0 50.8 13 4 14 10 20 10 10.0 89
80/3“ 100 80 132 120 106.4 62.0 17 4 14 10 20 10 10.0 102
90/3 1/2“ 100 80 146 130 120.6 70.0 17 4 14 10 20 10 10.0 102
100/4“ 100 100 156 140 130.2 77.8 17 4 16 10 20 10 10.0 130
125/5“ 130 121 184 165 152.4 92.0 17 4 16 10 20 10 25.0 166
32
Type 55 is a low corrugated bellow compensator with good
TYPE 55
sound insulating characteristics (structure- and liquid-borne
noise). It is characterized by a high expansion absorption
capability, in particular angular expansion.
Design:
Low corrugated rubber bellow with reinforcing inserts and integral
sealing beads (therefore self-sealing without additional gaskets)
for accommodating swivel flanges.
The flanges are provided with through holes.
Other bellow designs similar to type 50 are available on request.
Details for type 55
Bellow Bellows design Permissible operating data Electrical Hardness

(inner) material (outer) bar*) °C bar**) °C bar***) °C [Ohm m]
red/St EPDM Aramide EPDM 16 70 10 100 6 110 7 x 103 60
red IIR Nylon cord EPDM 16 50 12 70 10 90 7 x 107 55
60
Burst pressure > 50 bar Other bellow constructions as type 50 available on request.
*) DN 450 - 1000 = 10bar
**) DN 450 - 1000 = 8bar
***) DN 450 - 1000 = 6bar
Burst pressure DN 450 - 1000 > 30 bar Flange: (Design A)
Burst pressure DN 32 - 400 > 50 bar Swivel flanges both sides (design A) with integral rubber
profile, so that additional gaskets are not required
(self-sealing).
The flanges are drilled to DIN PN 10 as standard. Other

specifications in accordance with DIN, ASA, BS.
Flange material: Standard S 235 JRG2 (RSt 37-2)

zinc-plated and yellow passivated.
Other materials are available on request
(flanges up to DN 200 are partly provided
with forged collars towards the bellow
side.)
Design A
Vacuum supporting rings
WILLBRANDT compensators type 50 are vacuum-resistant.
To prevent the compensator bellow being drawn together by
Note: suction at negative pressure, the insertion of a vacuum sup-
For aggressive media, see resistance table. porting spiral (up to DN 300) alternatively a vacuum sup-
The bellow must not be painted or insulated. porting ring (from DN 350) is necessary for a suction value
Further installation information, see Annex. above 2 m (0.8 bar abs., 20% negative pressure).
33
Application:
TYPE 55
Type 55 For heating water
red For cold and hot water, also with the addition of chemicals
for water treatment. Industrial water, acids, lyes, alcohols,
esters and ketones.

yellow Application range: natural and town gas, blast furnace
gas, fuels, lubricants, heating oil, cooling water emulsions.
Type 55 For heating systems, as per DIN 4809
red/Sp With corrosion-proofed aramide inserts. For continuous
duty in hot water heating and high temperature water
central heating at 100°C / 110°C and 10bar / 6bar working
pressure over a 10year working life.
Type 55 All types with GL-Improved
all
Overall Bellow Flange PN 10 Movement absorption

DN length ØA Eff. ØD ØPC Ød n s ØC
surface ax + ax - lat +/- ∠°
32 125 81 17 140 100 18 4 15 30 30 30 30 65
40 125 86 18 150 110 18 4 15 30 30 30 30 74
50 125 96 32 165 125 18 4 16 30 30 30 30 86
65 125 110 53 185 145 18 4 16 30 30 30 30 105
80 150 122 85 200 160 18 8 18 30 30 30 30 118
100 150 142 128 220 180 18 8 18 30 30 30 20 137
125 150 170 187 250 210 18 8 18 30 30 30 20 166
150 150 196 259 285 240 22 8 18 30 30 30 20 192
200 175 256 409 340 295 22 8 20 30 30 30 12 245
250 175 306 599 395 350 22 12 20 30 30 30 12 295
300 200 410 822 445 400 22 12 22 30 30 30 12 354
350 200 470 1080 505 460 22 16 24 30 40 30 8 412
400 200 480 1379 565 515 26 16 25 30 50 30 8 470
450 250 545 1801 615 565 26 20 25 20 40 30 6 512
500 250 595 2038 670 620 26 20 30 20 40 30 6 570
600 250 695 3310 780 725 30 20 30 20 40 30 6 675
700 275 800 4019 895 840 30 24 35 30 50 30 8 780
800 250 880 5436 1015 950 33 24 40 30 50 30 6 887
900 300 981 6706 1115 1050 33 28 40 30 50 30 5 985
1000 300 1086 8231 1230 1160 36 28 40 30 50 30 5 1085
up to 50°C ~ 100%
Accessories:
up to 70°C ~ 75% Tie bar/Restraints See page 49
up to 90°C ~ 60% Deflector sleeve See page 51
Flameproof protection covers See page 51
Earth cover See page 52
34
Type 56 is a hand-built cylindrical compensator. This process
TYPE 56
allows the overall length to be varied. It is only designed to
compensate for lateral and angular movements. By its corrugated-
free design an easy flow is possible with no sediment deposit.
Design:
Cylindrical bellow body with reinforcing inserts and built-in rubber
profile for mating with swivel flanges. The compensator is
self-sealing, additional gaskets are not required.
Application:
Noise and vibration damper, thermal expansion absorption in deli-
very pipe lines, on containers and pumps for media containing solid
material.
Details for type 56
Bellow Core Reinforcing Cover Permissible Electrical Hardness

colour code (inner) material (outer) operating data resistance shore A
bar °C bar °C [Ohm cm]

3
red EPDM Nyloncord EPDM 6 20 6 90 7 x 10 60
yellow NBR Nyloncord CR 6 20 6 90 5 x 103 60
green CSM Nyloncord CSM 6 20 6 80 4 x 104 65
white NBR/white Nyloncord CR 6 20 6 80 5 x 103 55
lilac FPM Aramide CR 6 20 4 150 65
Flange:
Swivel flanges (design A) both sides with integral sealing bead,
no additional gaskets required (self-sealing). Flanges are drilled acc.
to DIN PN 10 as standard. Other specifications according to
DIN, ASA, BS and special flanges are also available.
Flange Material:
Standard S 235 JRG2 (RSt 37-2) zinc plated and yellow passivated.
Note:
Applicable only for lateral and angular movement (crease formation).
Do not paint or insulate. See installation information.
Flange PN 10
Overall length Perm. Δ Weight
DN ØC ØD ØPC Ød n s pressure lat ± length 200 mm
mm mm mm mm mm mm bar mm kg
40 100 - 1000 78 150 110 18 4 15 6 25 3.6
50 100 - 1000 88 165 125 18 4 15 6 25 4.5
65 100 - 1000 104 185 145 18 4 15 6 20 4.9
80 100 - 1000 119 200 160 18 8 15 6 20 6.0
100 100 - 1000 142 220 180 18 8 15 6 20 7.3
125 100 - 1000 169 250 210 18 8 15 6 20 8.1
150 100 - 1000 195 285 240 22 8 20 6 20 12.5
200 100 - 1000 245 340 295 22 8 20 6 15 16.8
250 100 - 1000 295 395 350 22 12 20 6 15 20.4
300 100 - 1000 348 445 400 22 12 20 6 15 25.2
35
Type 57 is a conical compensator produced by hand winding.
TYPE 57
Its overall length cannot be varied. We have an extensive
mould form package which is available on request. Due to its
configuration, type 57 expansion compensation is only possible
in the lateral and angular plane.
Design:
Conical bellow body with reinforcing inserts and integral rubber
profiles for mating with swivel flanges. The compensator is self-
sealing, additional gaskets are not required.
Application:
Noise and vibration damper for use in delivery pipe lines,
containers, building outlets and pumps, and wherever a
connection bridging piece allowing smooth free flow is
required owing to the composition of the medium.
Details for type 57

red EPDM Nylon cord EPDM 6 20 6 90 7 x 103 60

yellow NBR Nylon cord CR 6 20 6 90 5 x 103 60
green CSM Nylon cord CSM 6 20 6 80 4 x 1010 65
white NBR/white Nylon cord CR 6 20 6 80 5 x 103 65
lilac FPM Kevlar CR 6 20 4 150 65
Flanges:
Swivel flanges both sides (Design A) with integral rubber profile, no
additional gaskets required (self-sealing).
The flanges are drilled according to DIN PN 10 as standard. Other
specifications according to DIN, ASA, BS and special flanges are also
available.
Flange Material: Standard S 235 JRG2 (RSt 37-2),

zinc plated and yellow passivated.
Tie bar/Restraints:
It is recommended that these compensator elements be installed with
internal bracing. Due to the build up of pressure, elastic deformation
occurs which can distend the conical bellow body. This causes the
compensator to either compress or high tensile loads to be exerted on
the connecting parts.
36
TYPE 57
Overall Flange1 Flange2 Perm.

length pressure
DN1 DN2 ØC1 ØD1 ØPC1 n x Ød ØC2 ØD2 ØPC2 n x Ød s lat ±
mm mm mm mm mm mm mm mm bar mm
40 25 250 78 150 110 4 x 18 63 115 85 4 x 18 15 6 30
40 32 250 78 150 110 4 x 18 78 140 100 4 x 18 15 6 30
50 32 250 88 165 125 4 x 18 78 140 100 4 x 18 15 6 30
50 40 250 88 165 125 4 x 18 78 150 110 4 x 18 15 6 30
65 40 250 104 185 145 4 x 18 78 150 110 4 x 18 15 6 30
65 50 250 104 185 145 4 x 18 88 165 125 4 x 18 15 6 30
80 50 250 119 200 160 8 x 18 88 165 125 4 x 18 15 6 30
80 65 250 119 200 160 8 x 18 104 185 145 4 x 18 15 6 30
100 65 250 142 220 180 8 x 18 104 185 145 4 x 18 15 6 30
100 80 250 142 220 180 8 x 18 119 200 160 8 x 18 15 6 30
125 80 250 169 250 210 8 x 18 119 200 160 8 x 18 15 6 30
125 100 250 169 250 210 8 x 18 142 220 180 8 x 18 15 6 30
150 100 250 195 285 240 8 x 22 142 220 180 8 x 18 20 6 30
150 125 250 195 285 240 8 x 22 169 250 210 8 x 18 20 6 30
200 125 300 245 340 295 8 x 22 169 250 210 8 x 18 20 6 30
200 150 300 245 340 295 8 x 22 195 285 240 8 x 22 20 6 30
250 150 300 295 395 350 12 x 22 195 285 240 8 x 22 20 6 30
250 200 300 295 395 350 12 x 22 245 340 295 8 x 22 20 6 30
300 200 300 348 445 400 12 x 22 245 340 295 8 x 22 20 6 30
300 250 300 348 445 400 12 x 22 295 395 350 12 x 22 20 6 30
Special Designs:
Eccentric construction, larger nominal diameters and other sizes
available on request.
Note:
For aggressive media, refer to resistance table.
For further installation information, see page 59.
37
Type 58 is a cylindrical compensator produced by hand winding.
TYPE 58
The manufacturing process allows production in variable overall
lengths. It is only able to compensate for movement in lateral and
angular planes due to its design.
Design:
Cylindrical rubber bellow body with reinforcing inserts and
integral reinforced solid rubber flanges as well as separate
backing support flanges.
Application:
Noise and vibration damper as well as expansion compensator
for use in delivery pipe lines, containers, building outlets and
pumps, and wherever a connection bridging piece allowing a
smooth free flow is required.
Details for type 58

yellow/St NBR Steel cord CR 6 20 6 90 1 x 102 60
Flange:
Overall Flange PN 10 Perm. lat.
Pressure resistant solid rubber length press.
flanges with reinforcing inserts and DN ØD ØPC Ød n b s +/-
2-piece backing flanges in mm mm mm mm mm mm bar mm
S 235 JRG2 (RSt 37-2) drilled 40 150 - 1000 150 110 18 4 8 15 6 15
according to DIN PN 10. Other
50 150 - 1000 165 125 18 4 8 15 6 15
materials and hole sizes available
on request. The compensator is 65 150 - 1000 185 145 18 4 8 15 6 15
self-sealing and no additional gas- 80 150 - 1000 200 160 18 8 8 15 6 15
kets are required. 100 150 - 1000 220 180 18 8 8 15 6 15
125 150 - 1000 250 210 18 8 8 15 6 15
Note: 150 150 - 1000 285 240 22 8 8 15 6 15
Only suitable for lateral and
200 150 - 1000 340 295 22 8 8 20 6 15
angular movements.
250 150 - 1000 395 350 22 12 10 20 6 15
Mating flanges must be flat without 300 150 - 1000 445 400 22 12 10 20 6 15
projections or recesses. 350 150 - 1000 505 460 22 16 10 20 6 15
400 150 - 1000 565 515 26 16 10 24 6 15
Do not insulate or paint. 450 150 - 1000 615 565 26 20 10 24 6 15
See installation information.
500 150 - 1000 670 620 26 20 10 24 6 15
38
Type 59 is a conical rubber bellow produced by hand winding for
TYPE 59
absorbing lateral and angular movements. Its overall length can only be
varied by the production of new moulds. However, an extended range of
moulds is available. Only the standard range is shown in this brochure.
Please consult us when planning.
Design:
Conical rubber bellow body with reinforcing inserts and integral
reinforcing solid rubber flanges and backing support flanges.
Application:
Noise, vibration and underwater sound damper for use in delivery pipe-
lines, containers, pumps and building outlets, and wherever a
connection bridging piece allowing a smooth free flow is required.
Details for type 59

yellow/St NBR Stahl cord CR 6 20 6 90 1 x 102 60
Flanges: Note:
Pressure resistant solid rubber flanges with Only suitable for lateral and angular movement.
reinforcing inserts and 1-piece backing Mating flanges must be smooth without projections or recesses.
flanges in S 235 JRG2 (RSt 37-2) drilled acc. Do not insulate or paint. See installation information.
to DIN PN 10. Other materials and hole sizes
are available on request. The compensator is
self-sealing, no additional gaskets are Overall Flange1 Flange2 Perm. lat.
length press.
required.
DN1 DN2 s b ØD1 ØPC1 n x Ød ØD2 ØPC2 n x Ød +/-
mm mm mm mm mm mm mm bar mm
Special designs:
100 65 250 15 8 220 180 8 x 18 185 145 4x 18 6 30
Eccentric construction, larger nominal dia-
100 80 250 15 8 220 180 8 x 18 200 160 8x 18 6 30
meters and other sizes available on request. 125 80 250 15 8 250 210 8 x 18 200 160 8x 18 6 30
125 100 250 15 8 250 210 8 x 18 220 180 8x 18 6 30
Tie bar/Restraints: 150 100 250 15 8 285 240 8 x 22 220 180 8x 18 6 30
It is recommended that these compensator 150 125 250 15 8 285 240 8 x 22 250 210 8x 18 6 30
200 125 300 20 8 340 295 8 x 22 250 210 8x 18 6 30
elements be installed with internal bracing.
200 150 300 20 8 340 295 8 x 22 285 240 8x 22 6 30
Due to the build up of pressure, elastic 250 150 300 20 10 395 350 12 x 22 285 240 8x 22 6 30
deformation occurs which can distend the 250 200 300 20 10 395 350 12 x 22 340 295 8x 22 6 30
conical bellow body. This causes the 300 200 300 20 10 445 400 12 x 22 340 295 8x 22 6 30
compensator either to compress or high 300 250 300 20 10 445 400 12 x 22 395 350 12 - 22 6 30
350 250 300 20 10 505 460 16 x 22 395 350 12 x 22 6 30
tensile loads to be exerted on the connecting
350 300 300 20 10 505 460 16 x 22 445 400 12 x 22 6 30
parts. 400 300 300 24 10 565 515 16 x 26 445 400 12 x 22 6 30
400 350 300 24 10 565 515 16 x 26 505 460 16 - 22 6 30
Special designs with reinforced bellow parts 450 350 300 24 10 615 565 20 x 26 505 460 16 x 22 6 30
available (no distension). 450 400 300 24 10 615 565 20 x 26 565 515 16 x 26 6 30
500 400 300 24 10 670 620 20 x 26 565 515 16 x 26 6 30
500 450 300 24 10 670 620 20 x 26 610 565 20 x 26 6 30
39
WILLBRANDT Pipe Joint Type 60 - WRG
Type 60 is a rubber metal pipe joint for inhibiting noise and surface
TYPE 60
vibrations in piping on pumps, machines and apparatus.
TÜV approved for installation in heating systems with 100/110°C and

10/6 bar.
Design:
Cylindrical rubber buffer with vulcanized flange rings for accommodating
the flange holes. The rubber metal pipe joint is self-sealing and no
additional gaskets are required.
Application:
Building installations, hospitals and schools, in heating systems and in
water, hot water systems; also suitable for use weak acids and lyes in
industrial plants.
Material:
Rubber parts EPDM without inserts.
Steel flange rings with threaded holes.
Only manufactured in EPDM.
Design PN 6 Design PN 10
Overall Bellow Flange PN 6 Overall Bellow Flange PN 10

Weight Weight
length effec. length effec.
DN surface ØD ØPC Ød n DN surface ØD ØPC Ød n
mm cm2 mm mm kg mm cm2 mm mm kg
20 70 3 90 65 M10 4 0.7 20 70 3 105 75 M12 4 1.0
25 70 5 100 75 M10 4 1.0 25 70 5 115 85 M12 4 1.2
32 70 8 120 90 M12 4 1.3 32 70 8 140 100 M16 4 1.7
40 70 13 130 100 M12 4 1.6 40 70 13 150 110 M16 4 2.1
50 70 20 140 110 M12 4 1.8 50 70 20 165 125 M16 4 2.5
65 70 33 160 130 M12 4 2.0 65 70 33 185 145 M16 4 2.8
80 70 50 190 150 M16 4 2.9 80 70 50 200 160 M16 8 3.3
100 70 79 210 170 M16 4 3.3 100 70 79 220 180 M16 8 4.0
125 70 123 240 200 M16 8 4.2 125 70 123 250 210 M16 8 4.6
150 70 177 265 225 M16 8 4.9 150 70 177 295 240 M20 8 5.5
200* 70 314 320 280 M16 8 - 200 70 314 340 295 M20 8 7.5
*without TÜV
Installation information:
Reliable functioning requires perfect pipeline layout and
precisely designed pipe anchors. The rubber metal pipe
connections should be installed stress-free. Installation
gaps should be 70mm. Tension, torsion or bending loads
must be avoided.
Installation should be in an easily accessible location so

that maintenance and checks can be carried out. If stress-
free installation is not possible or if axial or radial movement
is expected, then WILLBRANDT rubber compensators
should be used. Additional gaskets are not required since
the mating surface is of rubber. Assembly takes place with
hexagon head cap screws DIN 933 and plain washers.
Tightening torque is 3kpm. Do not insulate WILLBRANDT
pipe joints (heat accumulation!).
40
TYPE 61
Type 61 is a low corrugated rubber compensator, characterized
by its cylindrical end connections, which make quick and easy
clamp fitting possible.
Design:
Low corrugated rubber body with reinforcement inserts, cylin-
drical at both ends for clamp fixing.
Application:
Waste-water piping, motor cooling systems, industrial plants,
ventilation plants, purification plants.
Details for type 61

red/St EPDM Steel cord EPDM 6 20 3 100 7 x 103 60
yellow/St NBR Steel cord CR 6 20 6 90 5 x 104 60
lilac FPM Aramide EPDM 6 20 2 150 65
Burst pressure >24 bar, vacuum resistant with supporting ring
Note:
Special measurements are possible. Pipeline outside diameter must be clean and
smooth (grind down any weld seams). Do not insulate or paint the bellow. Use wide
clamps (min. 20x1). Up to 2 bar, one clamp per side can be used. Above 2 bar, we
recommend the use of 2 clamps per side.
Movement absorption
Overall
DN Ødi length ØA s H B ax + ax - lat ± ∠± Weight
mm mm mm mm mm mm mm mm mm ° kg
50 60,3 250 120 5 97 55 20 25 15 20 0.5
65 76,1 250 135 6 97 55 20 25 15 20 0.6
80 88,9 250 158 6 85 80 20 25 15 20 0.7
100 114,3 250 183 6 85 80 20 25 15 20 0.9
125 139,7 250 208 6 85 80 20 25 15 20 1.1
150 168,3 250 254 7 65 120 20 25 15 15 1.4
175 193,7 250 278 7 65 120 20 25 15 15 1.5
200 219,1 250 304 7 65 120 20 25 15 10 1.7
225 227,0 250 311 7 65 120 20 25 15 10 1.8
250 273,0 250 359 7 65 120 20 25 15 10 2.2
300 323,9 250 408 7 65 120 20 25 15 8 2.6
350 355,6 250 439 7 65 120 20 25 15 8 2.7
400 406,4 250 491 8 60 130 20 25 15 8 3.2
500 508,0 250 594 8 60 130 20 25 15 6 4.0
600 610,0 250 696 8 60 130 20 25 15 6 4.8
Bigger nominal width possible.
41
WILLBRANDT Draining Hose Type 62
Type 62 has been especially developed for bridge drainage and is
TYPE 62
able to meet all the demands of this heavy duty application, e.g. large
temperature fluctuations, different media, vibration and large extension
absorption. To be mentioned in particular is its flexible design with a
very low adjustment force.
Design:
Core and covering corrugated throughout with concealed integrated
steel wire spiral and corresponding fabric inserts.
Spiral-free sleeves at each end for clamp fixing.
Material:
Chloroprene with nylon fabric inserts. Stainless steel or galvanized
clamps.
When used in conjunction with

SML-pipes the following hose
diameters are available:
ØDE
DN
mm
50 58
70 78
100 110
125 135
150 160
200 210
250 274
300 326
Note:
Check existing temperature during installation and install appropriately pre-tensioned. Do not insulate or
paint the hose. When ordering quote the pipe diameter of the sleeve extension. The hose is only suitable
for unpressurized operation.
Ø Li H s Length
mm mm mm mm
70 50 3 300 - 3000
100 50 3 300 - 3000
125 50 3 300 - 3000
140 50 3 300 - 3000
150 50 3 300 - 3000
200 50 3 300 - 3000
250 50 3 300 - 3000
300 75 3 300 - 3000
350 75 3 300 - 3000
400 75 3 300 - 3000
450 75 3 300 - 3000
500 100 3 300 - 3000
600 100 3 300 - 3000
900 100 3 300 - 3000
Spiral free sleeves at each end, can be extended as required.
Axial compression take-up abt. 30%, lateral extension take-up abt. +/- 15% of flexible length.
42
Type 63 is a rubber compensator that can be manufactured
TYPE 63
to specific design dimensions. There are no standard sizes
for this particular type. The overall length is variable and
depends on the amount of movement to be compensated.
Application:
For air, water and chemical installations as well as internal
or external through-wall installation in power stations.
Details for type 63
Bellow Bellow design Permissible operating data

colour code
Core Reinforcing Cover max max Hardness
(inner) material (outer) bar °C shore A
red IIR Polyester Fabric IIR 8 120 60
yellow NBR Polyester Fabric NBR 8 120 60
black CR Polyester Fabric CR 8 100 60
green CSM Polyester Fabric CSM 8 100 60
white SI Glass Fabric SI 8 200 50
lilac FPM Stainless Steel FPM 8 180 65
Note:
The permissible pressure stability is largely shape dependent.
Available in all shapes: round, rectangular or oval.
Operating pressure must be determined depending on shape
(round max. 8 bar, rectangular max. 2 bar).
Do not paint or insulate! See installation information!
wall sealing with clamps
wall sealing with flange
43
Type 64 is a compensator that can be manufactured
TYPE 64
to specific design dimensions. There are no standard
dimensions for this particular type. The overall length
is variable and depends on the amount of movement
to be compensated.
The compensator is manufactured from prefabricated
foils and depending on the material is vulcanized or
heated in the final form.
Applications:
The diverse materials used make type 64 suitable
for a wide range of applications, e.g. problems when
handling hot gases and the associated condensate
in scrubbing and flue gas systems.
Compared to metal compensators, type 64 in the

shortest overall length is capable of absorbing
significant axial and lateral expansion and
compensate assembly inaccuracies. Noise and
vibrations from equipment, e.g. fans, etc., are
simultaneously absorbed.
Movement:
axial - axial - lateral ±

Δ = ~ 0,3 x L Δ = ~ 0,05 x L Δ = ~ 0,1 x L
We can improve the movement by corrugation design and choice of material.
44
Standard designs:
Type 64 is manufactured in two basic
designs: Firstly, as a hose-type and a
flange-type compensator. Both can be
manufactured with flat convex or concave
profiles for round and rectangular piping
systems in all sizes. The material thickness
varies depending on the design between
1mm and 4mm. The connection surfaces
in way of the bellow are appropriately
reinforced, so that trouble-free connection
with clip or flange bolt connection is
possible.
It should also be noted, that the compen-

sators with flange design are available
pre-shaped up to a diameter of 1200mm;
for larger dimensions, these components
are supplied flat so that the flanges can
be erected during assembly.
Applications:
Plant construction, power stations, combustion
gas desulphurization plants, purification plant,
rain water systems, pipe wall penetrations, etc.
Note:
See installation information.
The compensators should not be painted
or insulated as this can cause premature
failure of the materials!
In case of enquiries, please specify the
particular design and respective hole
pattern.
Type 64 data
Bellow colour code Bellow design Permissible Hardness

operating data shore A
Core Reinforcing Cover max. max.
(inner) material (outer) bar °C
red EPDM Nyloncord EPDM 0.5 120 65

grey CR Nyloncord CR 0.5 100 55
none FKM Nyloncord FKM 0.5 200 70
none PTFE - 0.3 200 -
45
WILLBRANDT PTFE Compensator Type 80
Type 80 is a PTFE expansion bellow compensator hot-formed
TYPE 80
from extruded PTFE tubing under pressure to form continuous
corrugations.
Design:
Pure PTFE bellow with external stainless steel supporting rings,
PTFE profiles on both sides with steel backing-flange and
integral brace.
Application:
Chemical plants, for movement and noise reduction as well as
compensation of assembly inaccuracies. Recommended for use
in piping of fragile materials, e.g. glass, graphite, enamel.
Minimal compensating forces are necessary due to the elasticity
of the material.
Power curve under pressure Power curve in vacuum
curve DN
1 25 - 80
2 100 - 150
3 200 - 250
4 300 - 350
5 400 - 450
6 500 - 600
7 700 - 1200
over pressure under pressure
Important installation information: Flanges:

It is imperative that gaskets are used except in the case Steel edge flanges with antirust coating on both
of PTFE/PTFE-connections, e.g. PTFE covered IT sides, drilled acc. to DIN PN 10.
gaskets (Design 1) or PTFE covered IT gaskets with Other materials and hole patterns available.
stainless steel inserts (Design 2) or their equivalent.
Note:
Not suitable for vibrations!
Do not insulate!
See installation information!
Special designs:
For glass tubing.
For total vacuum.
For higher working pressure. Type 2
Type 1
Available on request.
Special construction up to PN 16 possible

in 2 - 10 corrugated design (Type 80 HD).
46
Movement forces type 80
TYPE 80
3 Convolutions 5 Convolutions
ax ± lat ± ax ± lat ±
DN
N/mm N/mm N/mm N/mm
20 45 20 - -
25 45 20 40 15
32 50 25 40 20
40 50 28 40 20
50 50 45 40 35
65 40 50 35 40
80 40 60 35 45
100 50 90 35 60
125 60 110 40 80
150 100 150 80 120
200 150 180 100 150
250 150 200 100 170
300 150 200 120 170
350 200 270 160 250
400 200 270 200 230
450 250 290 200 240
500 300 350 250 300
600 300 350 250 300
700 350 410 - -
800 380 490 - -
900 400 530 - -
1000 425 570 - -
1200 460 620 - -
3 Convolutions 5 Convolutions
DN Effec. Flange Movement absorption Movement absorption
bellow Weight Weight
surface ØD ØPC Ød n s ØC Overall axial lat. length axial lat.
length - - +/-
+ +/- +
cm2 mm cm 2
mm mm mm mm mm mm mm kg mm mm mm mm kg
20 9 105 75 14 4 12.0 53 50 10 10 8 2.5 - - - - -
25 13 115 85 14 4 10.0 62 50 12 12 10 2.5 75 20 20 15 2.8
32 18 140 100 18 4 12.5 72 50 12 12 12 3.0 75 20 20 18 3.5
40 25 150 110 18 4 12.5 80 50 12 12 15 4.0 75 20 20 20 4.5
50 39 165 125 18 4 14.5 98 75 15 15 15 6.0 100 25 25 30 6.5
65 55 185 145 18 4 18.5 118 75 22 22 17 7.0 100 35 35 30 7.5
80 90 200 160 18 8 18.5 122 100 25 25 17 8.0 125 40 40 30 9.0
100 135 220 180 18 8 18.0 148 100 25 25 17 10.0 150 40 40 30 11.0
125 190 250 210 18 8 20.5 174 125 28 28 18 12.0 175 45 45 32 13.0
150 295 285 240 22 8 21.0 200 150 28 28 18 15.0 225 45 45 32 17.0
200 460 340 295 22 8 23.0 256 150 28 28 20 20.0 225 45 45 32 22.0
250 670 395 350 22 12 27.0 303 150 28 28 10 35.0 225 45 45 15 37.0
300 940 445 400 22 12 27.0 360 150 30 30 8 48.0 225 50 50 10 50.0
350 1080 505 460 22 16 27.0 402 150 30 30 6 57.0 225 50 50 8 59.0
400 1400 565 515 27 16 27.5 453 150 30 30 6 70.0 225 50 50 8 72.0
450 1800 615 565 27 20 27.0 513 150 30 30 5 78.0 225 50 50 7 80.0
500 2100 670 620 27 20 29.0 564 150 30 30 5 86.0 225 50 50 7 89.0
600 3100 780 725 30 20 33.0 658 175 30 30 4 125.0 250 50 50 6 130.0
700 4415 895 840 30 24 33.0 800 170 35 35 2 128.0
800 5700 1015 950 33 24 35.0 905 170 35 35 2 130.0
900 7120 1115 1050 33 28 35.0 1005 170 35 35 2 133.0
1000 8740 1230 1160 36 28 35.0 1110 170 35 35 2 146.0
1200 12561 1455 1380 39 32 35.0 1330 170 35 35 2 175.0
47
WILLBRANDT PTFE Compensator Type 80 HD
Type 80 is a PTFE expansion bellow compensator hot-
TYPE 80 HD
formed from extruded PTFE tubing under pressure to
form continuous convolutions. Available with 2 to 10
convolutions for all nominal widths.
Design:
Pure PTFE bellow with external stainless steel support
rings, PTFE profiles on both sides with steel backing
flange and integral restraint. Pressure- and vacuumdiagram
with temperature influence
Flange:
Material GGG 40 with rust preventive coating (hole
circle drilling partly with threaded holes, for narrow
design), standard design PN 10.
Special holes and materials available on request.
Overall Movement absorption Movement absorption Movement absorption

length with 2 convolutions with 3 convolutions per further convolution*
DN
2 3 + je
Conv. Conv. ax +/- lat +/- ang +/- ax +/- lat +/- ang +/- ax +/- lat +/- ang +/-
Conv.*
mm mm mm mm mm ° mm mm ° mm mm °
25 45 55 12 6 4 9 9 6 14 3.0 2.0 4.5
32 55 65 13 6 4 8 9 6 12 3.0 2.0 4.0
40 55 70 15 7 5 8 11 8 12 3.5 2.5 4.0
50 60 70 16 7 5 7 11 8 11 3.5 2.5 3.5
65 60 80 20 8 6 7 12 9 11 4.0 3.0 3.5
80 65 90 24 8 6 7 12 9 11 4.0 3.0 3.5
100 70 95 25 9 6 6 14 9 9 4.5 3.0 3.0
125 75 100 25 9 6 6 14 9 9 4.5 3.0 3.0
150 75 105 25 10 6 5 15 9 8 5.0 3.0 2.5
200 80 110 25 10 7 4 15 11 6 5.0 3.5 2.0
250 90 120 26 11 7 4 17 11 6 5.5 3.5 2.0
300 95 125 26 11 7 3 17 11 5 5.5 3.5 1.5
350 100 125 26 12 7 3 18 11 5 6.0 3.5 1.5
400 100 135 26 12 7 3 18 11 5 6.0 3.5 1.5
500 105 140 26 15 8 3 20 12 5 6.5 4.0 1.5
600 105 140 26 13 8 2 20 12 3 6.5 4.0 1.0
*max. 10 Convolutions
48 flange picture see page 71.
WILLBRANDT Rubber Compensators
Tie Bars / Restraints
Under pressure, rubber compensators develop a reaction force
in positive axial direction (effective surface x working pressure)
which for unrestrained compensators - Design A - must be
absorbed by the nearest anchor points or roller bearings.
When used for the absorption of vibrations, lateral and angular
expansion as well as noise, it is possible by the arrangement of
restraints to create a controlled installation situation (controlled
expansion absorption, see installation information).
Our B-M limiter types can be used for all types (except H - only
for type 49).
The diagrams show the various types.

Example of the application of a flange design
as a universal joint DN 300 (design G)
Flange shapes for tie bars as per designs B-E (10 bar)
DN 25 - 200 DN 250 - 900 (1000) DN 1000
Design A Design B
Rubber compensator without restraint with swivel Rubber compensator with tie bar for the absorption
flanges, suitable for all-round movement absorption. of reaction force. Tie-rods fitted in rubber bushes.
Suitable for absorbing noise, vibrations and lateral
(radial) movement (+ 10 / - 15 mm).
Design C
Rubber compensator with tie bar for absorption of reaction
force. Tie-rods fitted in rubber bushes including thrust
limiters for bellow retention. Suitable for absorbing noise,
vibrations and lateral (radial) movement ( + 10 / - 15 mm).
49
Design E
Rubber compensator with tie bar for absorbing the
Design F
reaction force. Tie-rods are fitted with c-shaped
Rubber compensator with hinged arrangement for
washer and ball disc. Suitable for lateral movement
absorbing the reaction force. Suitable for angular
(radial).
movement in one plane; two hinged compensators
with an intermediate pipe can absorb very large
lateral movements (see installation examples).
Design G
Rubber compensator with universal restraint for
absorbing the reaction force. Suitable for absorbing
angular movement in a circular plane. Three univer-
sal joints in an angular arrangement can absorb very
large axial and lateral movement (see installation
examples). Design L
Rubber compensators with segment restraint
supported in spherical disks/conical sockets for
absorbing thrust and tensile forces. Suitable for
absorbing lateral movement in pressurised and
vacuum applications.
Design K
Rubber compensator with external tie bars fitted with
c-shaped washer for absorbing the reaction forces.
Suitable for absorbing large lateral (radial)
expansion.
Design H
Rubber compensator with external tie-rod restraint
for absorbing the reaction force. External tie-rods
are supported in spherical disks and ball cups with
internal hexagon nuts for thrust limitation.
Design M
Rubber compensator with internal restraint and tie Note:
rods supported in spherical disks/conical sockets for In normal cases, the design of the restraints is
absorbing thrust and tensile forces. Suitable for based on the reaction/friction force. Please contact
absorbing lateral movement in pressurised and us should additional pipe forces need to be
vacuum applications. absorbed!
50
Special Parts
Flameproof protective covers
Types 40, 49, 50, 55 are available in asbestos-free

design approved by the Classification Society.
These accessories protect the rubber compensator

against the effects of flames up to 800°C for a period
of 30 minutes. WILLBRANDT compensators together
with their flameproof protective covers satisfy the
requirements of the Classification Socitey for use
on ships, for fire extinguishing piping in operational
buildings or in pressure booster plants.
The compensators are installed in the usual manner.
The protective covers are fitted after installation and
cover both the compensator and adjacent pipe flange.
Operation of WILLBRANDT compensators is not Diagram shows open condition.
hindered as the cover extends to the pipe, the full
movement of the compensator can be absorbed.
Special cover and restraint sizes are available on
request.
Deflector sleeve
This should always be used for highly abrasive media

or if strong turbulence is to be avoided.
The deflector sleeve is made in conical form with edge
flange/holed flange, so that the expansion capabilities
of the compensator are least affected.
The deflector sleeve length depends on the length of

the compensator and the movement to be absorbed
(standard value: compensator length - 15 mm corres- Design I with flange hole pattern
ponds to the deflector sleeve length).
Gaskets must be fitted. Gap between the buildings
should be arranged according to the deflector.
Attention:
In the case of axial expansion in excess of -15mm, the
mating flange inside diameter must be taken into
account and the deflector sleeve diameter checked.
With lateral expansion, the deflector sleeve diameter Design II with collar
reduces by twice the lateral movement to be absorbed
(standard design for lat. +/-5mm).
51
Special Parts
Earth Cover
Available for all types with or without tie bar.
The earth cover is a two -piece cover, which is specially

designed to protect rubber compensators in the earth.
It is designed not to limit compensator movement.
Design:
Two-piece cover of S 235 JR G2 (RSt 37-2) or
stainless steel. Fixing takes place with clamps that
are permanently joined to the halves of the covers.
Note:
Easy installation, due to two-piece design.
It must be ensured during installation that downward
drainage is possible.
Safety compensator
Available for all types with or without tie bar.

The safety compensator is used for aggressive media
for the purpose of leakage monitoring (2-bellow system).
Pressure balanced compensator
Available for all types. The pressure balanced

compensator absorbs the reaction forces within
the restraint and is suitable for absorbing axial
and lateral movement.
52
WILLBRANDT Stainless Steel Compensators
Standard range overview
Shown on the following pages are our extensive range of products of which we
carry a large selection in stock. These are the types most frequently used in normal
practice.
The type of connections illustrated can be varied to suit specific requirements.

Alternatively we can supply weld ends, flanges or connecting parts in a special
design or request. We can also manufacture compensators in a special design
according to individual specifications.
Type Exhaust expansion joints PN 2,5 Type Axial expansion joints with 1 layer
multi-ply, DN 40 PN 10/16 NB 15 – DN 250
200 with weld ends 206 with weld ends (formerly type 200)
201 with weld ends and internal sleeve 207 with weld flanges and internal sleeve
(formerly type 200-L)
202 with loose flanges
203 with *loose flanges and internal sleeve 208 with loose flanges (formerly type 230)
209 with loose flanges and internal sleeve
204 with fixed flanges (formerly type 230-L)
205 with fixed flanges and internal sleeve
Type Axial expansion joints - multi - ply Type Lateral expansion joints - multi - ply
PN 10 - PN 25, from DN 40 PN 10 - PN 25, from DN 40
210 with weld ends 220 with weld flanges

211 with weld ends and internal sleeve 221 with weld flanges and internal sleeve
212 with loose flanges 222 with fixed flanges

213 with *loose flanges and internal sleeve 223 with fixed flanges and internal sleeve
214 with fixed flanges

* On one side with loose flange and on the other side with fixed flange.
216 with welded neck flanges
217 with welded neck flanges and internal sleeve
53
Type Angular expansion joints, onesided Type Angular expansion joints, movable on all sides
movable PN 10 - PN 25, multi-ply PN 10 - PN 25, multy-ply
from DN 40 from DN 40
230 single hinged, with weld ends, movable in 234 single gimbal, with weld ends, movable in all
one plane directions
231 single hinged, with weld ends and internal 235 single gimbal
sleeve, movable in one plane 236 single gimbal, with fixed flanges, movable in all
232 single hinged, with fixed flanges, movable in directions
one plane 237 single gimbal, with fixed flanges and internal sleeve,
233 single hinged, with fixed flanges and internal movable in all directions
sleeve, movable in one plane
Type Lateral expansion joints as Double Hinge Type District heating expansion joints
Unit PN 10 – PN 25, multi-ply from DN 40
from DN 40
228 One-Step design
224 with weld ends 229 Standard design
225 with weld ends and internal sleeve -short length
-long installation length
226 with fixed flanges
Type Pressure Balanced Bellow Type Heating compensator

from DN 40 DN 15 - DN 50
270 both sides with threaded connection
54
Stainless Steel Hose Type 310/311
Type 310
Stainless steel corrugated hose without braiding Temperature
Operating range from -270°C to max. +600°C
Type 311 possible.
Stainless steel corrugated hose with braiding
Bending radius
Design Use the following table as a guide.
Parallel corrugated all-metal hose manufactured from Distinction must be made between: Minimum bending
butt welded pipe. Available with or without braiding. radius with single bending and normal bending radius
for frequent bending.
Hose materials
Standard: 1.4541/DIN17440 Material connection
Special material: 1.4571/DIN17440 Available are various types of connections that are
shown on the following page. These connections
Braiding are available in diverse materials.
Standard: 1.4301
Also available in 1.4571 or 1.4541 on request. The following table contains selection criteria:
Other special materials are available for hose and

braiding subject to specific order quantities on
request.
Selection criteria Material of the connections

No. Indication (draft page 54) Stainless Brass Malleable Red cast
Steel steel cast iron
001 Collar loose flange x x
002 Fixed flange x x
003 Pipe fixed flange x x
004 Pipe collar loose flange x x
005 Flared tube end loose flange x x
006 Tube socket / weld end x x x x
007 Conical outside threading x x x x x
008 Bushing x x x x x
009 Cylindrical outside threading x x x x x
010 Hexagonal bushing x x x x x
011 Conical screw fitting with outside threading x x x x
012 Conical screw fitting with inside threading x x x x
013 Flat sealed screw fitting with outside threading x x x x
014 Flat sealed screw fitting with inside threading x x x x
015 Socket union nut x x x x x
Further connections on request.
55
Characteristics
Nominal bend Minimum

Inch Inner-Ø Tolerance Type Outer-Ø Tolerance Pressure radius bend radius Weight
(inner) (outer) Frequently One-time ± 10 %
bending bending
mm mm mm mm kg/cm2 mm mm g/m
310 16.1 0.6 5.0 125 35 150

3/8 10.6 0.3
311 17.5 0.8 75.0 190 35 300
310 19.3 0.6 5.0 140 35 160
1/2 12.9 0.3
311 20.8 0.8 70.0 210 35 320
310 23.7 0.8 4.0 190 45 250
5/8 15.7 0.4
311 25.2 1.0 65.0 285 45 500
310 28.8 0.8 3.0 215 55 280
3/4 19.8 0.4
311 30.3 1.0 50.0 310 55 530
310 34.5 0.8 3.0 250 70 380
1 25.8 0.4
311 36.0 1.0 40.0 375 70 750
310 43.7 0.8 3.0 270 80 420
1 1/4 33.0 0.4
311 45.7 1.0 35.0 405 80 950
310 52.0 1.0 2.0 320 100 700
1 1/2 40.0 0.5
311 54.0 1.2 30.0 480 100 1350
310 65.5 1.0 1.0 360 130 880
2 51.6 0.5
311 67.5 1.2 25.0 550 130 1600
310 85.4 1.2 1.0 450 175 1250
2 1/2 66.0 0.6
311 87.9 1.4 20.0 675 175 2600
310 97.5 1.2 1.0 500 200 1750
3 76.6 0.6
311 100.0 1.4 18.0 750 200 3200
310 125.0 1.2 1.0 600 250 2100
4 103.0 1.0
311 128.0 1.4 14.0 920 250 4400
310 151.5 1.2 1.0 750 325 3250
5 127.5 1.0
311 154.5 1.4 12.5 1160 325 5750
310 177.0 1.2 0.8 850 375 4000
6 151.5 1.0
311 180.0 1.4 10.0 1320 375 6900
56
Connection options for stainless steel hoses type 310/311
57
WILLBRANDT Fabric Compensator Type 300-GEW
Type 300 is a highly flexible expansion bellow that is a long-
TYPE 300
established design element in the areas of power generation
(coal, oil and nuclear power plants, gas turbine peak-load
power stations), ore dressing (blast furnace and sintering
plants), cement industry, air conditioning and materials
handling technology (fans and blowers, in pneumatic and
vibrating conveyor plant), in shipbuilding, apparatus and
motor construction and many other branches of industry. It
compensates for heat expansion in all planes and absorbs
mechanical and acoustic oscillations or vibrations.
Standard Design
The simplest form of a GEW compensator, but only suitable for round duct and positive pressure.
(In the case of square ducts, the pipe must be drilled. Negative pressure will cause the compensator
1 to contract and reduce the duct sectional area).
Media temperature up to 300°C
Positive pressure up to 2000 mm WC Dimension „R“ : 4 times expansion absorption
(minimum dimension 40 mm).
With this design the majority of expansion problems can be solved efficiently.
Square ducting does not need to be spot-drilled, no reduction in pipe cross section at negative
2 pressure, good temperature reduction in the fixing areas with an increase in the „i.W.“ measurement,
simple mounting (due to the shape of the fastening) also for subsequent installation.
For round, square or oval ducting at positive and negative pressure.
Positive pressure up to 3000 mm WC. Contact us in case of higher pressures!
Dimension „R“ : 4 times expansion absorption (minimum dimension 40 mm).
As for design 2, but for very high temperatures with glass wool insulation (acid resistant) between
compensator and deflector sleeve.
3 For round, square or oval ducting at positive and negative pressure.
Positive pressure up to 2000 mm WC
Dimension “R” : 4 times expansion absorption (minimum dimension 40 mm).
This design is recommended if mounting flanges are to be used (e.g. for a ventilator), at higher
pressure or if a reduced overall length is required. For all ducting cross-sections.
4
(for higher temperatures, increase distance between deflector sleeve and compensator)
Positive pressure up to 5000 mm WC
Dimension “E” : 3 times expansion absorption ; ∆I - axial
Dimension “E” : 4 times lateral offset (radial displacement), if this is greater than the axial expansion
absorption (minimum dimension 80 mm).
As for design 4, but only for negative pressure. Increased distance between required compensator
and deflector sleeve, to avoid fabric abrasion.
5 Media temperature up to 350°C (for higher temperatures, increase distance between deflector
sleeve and compensator).
Negative pressure up to 4000 mm WC
Dimension “E” : 3 times expansion absorption ; ∆I - axial
Dimension “E” : 4 times lateral offset (radial displacement), if this is greater than the axial expansion
absorption (minimum dimension 80 mm).
This design is recommended for wall and ceiling ducting for non-flammable pipes subject to axial,
lateral and angular movement. On both sides the compensator has a wall and ceiling ending with
6 diaphragm in silicone rubber without fabric lining and opposite compensator with fabric liner.
Certified acc. to DIN 4102, part 11
MPA Braunschweig Nr. P-3740/4280-MPA BS
58
Planning, Installation and Maintenance Instructions for
Types 39, 45, 46, 48, 49, 50, 51, 53, 54, 55, 56, 57
WILLBRANDT rubber compensators are supplied ready IMPORTANT

for installation and are fitted with one-piece rotary metal When conveying abrasive media (liquids containing solids,
flanges in conformity with the standard connection (DIN, e.g. water/sand) the compensators must not be directly
ASA, BS, etc.). attached to the pump connecting piece (suction/pressure
side), due to a risk of the compensators being damaged by
The flanges should fit neatly, without any burr, within the the relatively high speeds associated with the twist and
clamping range of the rubber bellow with a rubber sealing whirl formations in the pump connecting piece. This also
surface protruding about 2 - 10 mm, depending on the applies to bent pipes and tailings.
nominal width.
EB 7
The installation space between the pump connecting piece
Planning instructions and compensator must be 1 to 1.5 times the nominal
The lines must be designed in such a manner that the diameter (DN). Pump operation against a totally or partially
compensators are guided by fixed bearings (FP) or sliding closed gate or flap valve must be avoided. Cavitation must
bearings (GL); see: also be avoided as this can result in the rapid destruction
of the compensator.
Installation example 1
Compensating of axial expansion with unbraced EB 8 (Axial prestress)
compensators. With axial prestress it is necessary to ensure that the
compensators are prestressed by not more than
Installation example 2 maximum 10 mm when in a non-installed state. For
Compensating lateral and axial expansion with an unbraced higher prestresses a compensator in conformity with
compensator. EB 8 must be used, i.e. the compensator must be first
fully installed after which the corresponding prestress
Installation example 3 is generated with the firmly installed compensator.
Compensating of lateral and axial expansion with unbraced
compensators at an outgoing pipe. Reason: With a higher prestress in a non-installed state,
the sealing bead can spring out of the holder of the steel
Installation example 4 backing flange and damage the sealing bead in the
Compensating of axial expansion by angular movement process.
reversal with braced compensators. Advantage: Large axial
expansions can only be absorbed by two compensators. EB 8 (Lateral prestress)
For compensator arrangement, it must be ensured when
Installation example 5 dimensioning the pipe that any necessary lateral prestress
Arrangement of pipe hinge compensators in three hinge must be applied only with a securely installed compensator
systems for absorbing expansion in two directions. by means of pipe misalignment (EB 8a). A lateral prestress
Advantage: High expansion absorbing rates, low adjusting of only 5mm is possible prior to installation. It must
forces, a soft corner. however be ensured that the rubber bead is not pulled
out of the groove in the steel backing flange.
Installation example 6
Use of rubber compensators with pumps. In this case Safety measures
compensators in the pressure line should always be braced The pipes must be protected against impermissible over-
to ensure that internal pressure does not overload the pressure, excessive rise of temperature and uncontrolled
pump connecting piece. A vacuum bearing ring should be vacuum. The limiting values for the respective settings are
used on the suction side if the negative pressure exceeds shown in the data sheets of our catalogue relating to the
0.8 bar, absolute. respective types. In addition, appropriate drain and venting
options should be provided to prevent water impact and
Bracing examples: vacuum failures, which can also cause compensator
Rubber compensators must be installed between fixed damage.
points, as described above, in order to take up axial
expansion. The axial and lateral expansion must be
transformed where this is not possible so that braced
rubber compensators can be used to neutralize the arising
reaction forces (inside surface of the compensator
multiplied by the operating pressure). In this arrangement
only appropriate sliding bearings can be used for correct
introduction of the expansion.
An extensive range of rubber compensator bracings is

listed in our catalogue.
59
Medium safety 5. Tightening with a torque wrench
Evenly tighten all screws manually (stage 1) (ensure
Since the inside of the compensator comes into contact parallelism with the sealing surfaces). The tightening
with the media, it must be ensured that only media is torques specified in Table 1 are sufficient for an
pumped as specified in the resistance list as suitable for operating pressure of 16/25 bar. These values should
the inner rubber. be increased by 30% for an operating pressure of
25 bar. After the third stage, 30 minutes should be
If other media are used we should be notified of the same allowed to pass before retightening to the final torque
together with the relevant data in accordance with the specified in stage 3. Further tightening of the screws
safety data sheet for chemical substances and preparation is unnecessary, particularly since this could destroy
as per DIN 52900, Item 1 to 2.13, in order that we may the surface seal.
ascertain whether the inner rubber of the compensator is
suitable. Table 1
Stage 3
Flow rates DN Stage 2 16 bar 25 bar
With high flow rates it is necessary to clarify whether the 20 - 80 50 Nm 80 Nm 150 Nm

compensators have to be installed with or without a guiding 100 - 300 50 Nm 100 Nm 160 Nm
pipe to avoid wear as a result of excessive whirling. 350 - 500 50 Nm 130 Nm 170 Nm
600 100 Nm 210 Nm 280 Nm
Mating flanges 700 100 Nm 250 Nm 325 Nm
750 100 Nm 280 Nm 370 Nm
Mating flanges must conform in their design with EB 9 to 800 100 Nm 300 Nm 400 Nm
ensure reliable sealing and clamping of the rubber 900 100 Nm 310 Nm 410 Nm
compensators. 1000 100 Nm 340 Nm 440 Nm
Installation Attention: Bellow

Bellow must not be painted or insulated.
1. Check the packaging of the rubber compensators
for damage. Damaged compensators must never
be released for installation. Pressure test
2. Check the envisaged installation gap. The mating The rubber compensator is not a proper pressure vessel,
flange must be installed in true alignment. The but is classified according to the Pressure Equipment
maximum deviation within the installation gap in Directive as a "pipe accessory" (pipe component). When
relation to the compensator is +10 mm, minus the including the compensator is the pipeline, sealing does not
corresponding expansion specifications. The take place via a separate seal, but directly on the integrated
maximum lateral deviation of the flange is 5 mm. surface seal of the rubber bellow.
Note: If it is not possible to observe the above A one hundred per cent pressure test of the rubber
tolerances then proceed with an axial/lateral compensators at the manufacturer can adversely influence
prestress as defined by EB 8 / EB 8a. the integrated rubber sealing surface. For this reason,
pressure testing of the rubber compensators at the
3. Arrangement of the screws EB 10 manufacturer takes place only at the special request of
For compensators that have through-holes the screw the customer with the utmost care.
heads must face the bellow to avoid damaging the
bellow body when under pressure. For compensators The pressure test is normally carried out only after the
with threaded holes in the flange, the screws must fit rubber compensators have been fully installed in the
flush with the inner side of the flange in relation to the pipeline system. The information contained in these
bellow so that protruding screws cannot damage the installation instructions should be observed prior to the
bellow when under pressure. pressure test.
4. The flange screws must be evenly tightened in

alter-nation as shown in Table 1. It must also be
ensured that the sealing bead does not tilt. The
entire protruding sealing surface must be uniformly
compressed. The screws must be evenly tightened
crosswise 3-4 times.
60
Advice Storage
1. After the compensators have been installed they should See DIN 7716 - guidelines for the storage of rubber parts:
be protected in an appropriate manner against damage, Rubber compensators must be stored free of stress,
and the protection should only be removed just before deformation and bending. Rubber compensators with
putting into operation. steel flanges must be stored upright on the flanges
(to avoid the risk of crushing).
2. Cover the rubber bellows when carrying out welding
and torch-cutting work; temperatures in excess of 80°C Storage room
can cause damage.
The storage room must be cool, dry, dust-free and
3. The rubber parts must not be over-painted. Solvents moderately ventilated.
and chemicals will attack the surface and destroy the
bellow. Oxygen and ozone
4. The compensators must not be insulated as this can Rubber parts must be protected from draughts. If necessary
result in overheating and drying the bellow and damage they should be covered. Do not operate any ozone-
to the same. generating facilities in the storage room, e.g. electric
motors, fluorescent lamps, etc.
5. The best operating results are achieved when the
compensator operates stress-free under operating Other jointly stored media
conditions (take appropriate prestressing into account
during installation). Do not store solvents, fuels, chemicals or similar
substances in the same storage room.
6. The fixed points must be checked to see whether they
are suitable for absorbing the reaction force from the
non-braced compensator or whether the adjusting
forces and initiation of expansion with appropriate Supplementary installation and mounting
sliding bearings takes place at the correct distance instructions for type 45 - 46 (EB 11)
from the compensator.
The type 46 rubber compensator should be installed free
7. Compensators braced with tie rods should be appropria- of any tension. Screws should always be tightened with
tely adjusted following installation. The tie rods should two wrenches to avoid damaging torsions being transmitted
be able to be turned hand-tight. All hexagon nuts must to the compensator; see EB 11.
subsequently be locked with lock nuts.
Installation procedure
1. Attach the screw-joining parts to the pipe and check

the installation gap! The installation gap must equal
Maintenance the compensator length (130 mm +5mm).
1. Rubber compensators do not require any 2. Insert the compensator and tighten with two wrenches.
maintenance, but they must be regarded as wearing
parts. Nominal diameters DN 20 - 25
The front screw-in part is used as a steady while the union
2. It is important that the installed parts are regularly nut is tightened (to avoid the transmission of torsions to
inspected for initial signs of ageing, leakage and blister the bellow).
formation. In the event of major maintenance work on
the plant, the condition of the interior lining should also Nominal diameters DN 32 - 50
be inspected (e.g. check for swelling, hardening, wash- The rear screw-in part is used as a steady while the union
out and cracks). nut is tightened (to avoid the transmission of torsion to the
bellow).
See main installation instructions for all other installation

points.
61
Installation Examples
EB 1 EB 6
EB 2
EB 7
EB 3
EB 8
EB 4
EB 5 EB 8 a
62
EB 9 EB 10

EB 11
DN 20/25 Type 46 / DN 20 - 50 Type 50
DN 32 - 50 Type 46

63
Installation and Maintenance
for all Solid Rubber Flanges for Types 40, 42, 58, 59, 63
Extract from documentation required by the Technical

Inspectorate for type 40 large compensators (cooling water
system in a nuclear power station).
1. Identification 3. Storage
1.1 Delivery documentation and compensator (see DIN 7716)

identification marking must correspond. „Guidelines for the storage of rubber parts"
1.2 Identification marking on the rubber compensator Rubber compensators must be stored stress-free without
a) On the compensator collar, above the embossed deformations and kinks. Rubber compensators must be
name plate. stored upright on the flanges (to avoid the risk of crushing!).
XX XX/XX
Production No. month/year 3.1 Storage room
The storage room should be cool, dry and dust-
b) Name plate WILLBRANDT Compensator made free and moderately ventilated.
by Continental
3.2 Oxygen and ozone
Type 40 xx/x xxx bar Protect rubber parts from draughts, cover in case
Material/inserts working operating pressure of emergency. Do not operate ozone-producing
devices such as electric motors, fluorescent light
DN xxxx/xx build length xxx sources etc. in the store room.
Nominal width/flange Standard build length*
3.3 Co-storage
* Attention: The installation length (mounting) can Do not store with solvents, fuels, chemicals and
vary! Check pre-restraint! similar items.
2. Transport 4. Installation
2.1 Packaging Package parts. 4.1 Pipes
Note „TOP" at the top and „cable or lifting hook" 4.1.1 Check dimensions of planned installation gaps.
steel backing rings (with bracing) and the rubber The total installation discrepancies in the piping
compensator flanges must remain fastened until and operating movements must not exceed the
final mounting. The relatively light rubber part is maximum movements specified in the design lay-
bonded to heavy metal flanges - avoid excessive out.
loading of the rubber part.
4.1.2 Clean mating flanges, remove anti-corrosion paint
2.2 Tools from surfaces.
No sharp-edged tools, wire cables, chains or lifting
hooks (danger of damage to rubber). 4.1.3 Mating flanges must be smooth, flat and free from
burrs.
2.3 Lifting and moving
Always lift both steel flanges simultaneously. 4.1.4 Do not subject the compensator to stress. Bolt
Shackle at both sides or place padded tie-bars holes must be in alignment.
through the compensator or lift both sides.
4.2 Bellow
2.4 Ground level transportation The bellow must not be painted or insulated.
Move flanges by rolling.
64
4.3 Installation 6. Final installation inspection
4.3.1 Do not use sharp-edged tools. Additional gaskets 6.1 Damage

are not required. The compensator rubber flange Check complete compensators for visible
seals directly on to the pipe flange. damage and in particular clean the gap
between the steel backing flange and rubber
4.3.1 Fasten the compensator at both flanges with e.g. 2 bellow (remove foreign bodies, sand, etc.).
threaded rods before loosening the lifting device.
6.2 Leakages
4.3.2 Insert all flange bolts and hand-tighten. Tighten bolts when possible leakages occur during
pressure testing (1.3 x design pressure).
4.3.4 Do not use plain washers on steel backing flanges.
4.3.5 If at all possible, do not position bolt heads against 7. Maintenance and Monitoring
the compensator bellow.
7.1 Before final commissioning, check the tightening
4.4.6 Tighten flange bolts crosswise using a torque torque of the flanged joints.
wrench with the specified torque over 3 inter-
vals. 7.2 Rubber parts must not be painted and should be
kept clean. (Clean with water or soapy water).
4.4.7 Do not weld close to the rubber compensator. If Keep the parts free from grease and oil.
necessary, cover the compensator with asbestos for
protection against welding heat and flying sparks 7.3 Inspection must be carried out minimum one week
(sparks and temperatures above 60°C will damage after commissioning. Tighten flange bolts with tor-
the rubber parts!). que wrench. Inspections must be carried after 1,4
and 12 months, then annually.
Attention: 7.4 Inspection criteria

When welding, steel-wire compensators
throughout the whole piping system can be - External damage to rubber and bracing.
damaged by current leakage or electrical earthing. - Deformation of rubber flange external diameter
The anode and cathode of the E welding connection between the bolts (flange surface displacement).
must always be on the same section of piping. - Variations in the rubber bellow (blister formation,
(Not separated by the rubber compensator!). brittleness, fissures, hairline cracks)
- Check bracing for excessive movement
The bellow must not be painted or insulated. and misalignment.
5. Pipe leading Assess corrosion and wear over the whole component.
5.1 Anchor points and mountings

Prior to filling the piping, it must be ensured that all
anchor points and mountings are installed and ope-
rational. The bracing anchors must provide uniform
support and must be adjusted to the existing piping.
65
Flange Bolt Torque (Nm) for
WILLBRANDT Compensators for Types 40, 42, 58, 59, 63
Installation information Flange tightening torque

The flange bolt torques given in the table provide a specific
Tools: Torque-wrench, rubber hammer, centre surface pressure of 7 N/mm2 relative to the total surface of
punches. All tools to be burr-free the compensator flange (use flanges without seal). Because
(danger of damage to rubber parts) of the temporary settling process in the rubber flange area the
surface pressure falls under working conditions to some 50%
Use flange bolts with property class 8.8 of the final value (step III). The residual effective gripping and
(new bolts, greased). sealing force is completely sufficient and suitable for test
pressures up to 16 bar (tensile stresses from over-expansion
Step l a) insert all bolts and tighten equally are not permissible!).
by hand.
b) Fasten with about 3 crosswise and Attention: The maximum tightening torques given
uniform turns at torque 250 Nm must not be substantially exceeded, since
(25 kpm). Check gap width at outer an excessive load causes a constant
edge of flange. increase in the flow in elastomer and
c) Settling time 30 minutes. leads to destruction (crushing).
Step II d) Tighten all bolts crosswise by 3 Torque: Rough estimation of the final tightening
turns as per table above or 2/3 of torque for special flanges
final torque. Check gap width.
e) Settling time > 60 minutes. Rule of thumb
MA = 0.2 • FVM • d2
Step III f) Tighten crosswise 2 turns at final MA = Bolt Tightening Torque
torque. d2 = Screw Thread Flanks-O
DO NOT TIGHTEN FURTHER! FVM = Installation Prestress Force = KA* • FKL
*KA = Tightening Factor ~ 1.4 greased,
Before test pressure: check torque 1 turn crosswise with against a firm support
final value (Step III). KA = Experimental Value = 1.0 selected flow
process in rubber flange
Later inspections: follow service manual. Only tighten flange FKL = Clamping Force, Contact Pressure
bolts to final value (Step lll). 7 N/mm2 for total flange surface for
Type 40
πx
2
FKL = ( Flange D2 - DN ) x Contact Pressure x (N)
4 Number of bolts
66
Step I Step II Step III
DN Pre-assembly PN 6 PN 10 PN 16 ASA 150 PN 6 PN 10 PN 16 ASA 150
Nm Nm Nm Nm Nm Nm Nm Nm Nm
200 100 160 200 160 200 200 250 200 250
250 100 160 160 200 200 200 200 250 250
300 150 160 160 240 280 200 200 300 350
350 150 200 160 200 360 250 200 250 450
400 150 160 240 280 320 200 300 350 400
450 150 200 160 280 360 250 200 350 450
500 150 160 240 360 360 200 300 450 450
550 200 400 500
600 200 240 320 520 480 300 400 650 600
650 200 440 550
700 200 240 320 440 440 300 400 550 550
750 250 480 600
800 250 320 440 560 640 400 550 700 800
850 250 600 750
900 250 360 440 520 640 450 550 650 800
950 250 720 900
1000 250 360 560 720 680 450 700 900 850
1050 250 720 900
1100 250 720 900
1150 250 720 900
1200 250 440 680 960 720 550 850 1200 900
1250 250 880 1100
1300 250 920 1150
1350 250 1000 1250
1400 250 560 840 1000 960 700 1050 1250 1200
1450 250 1040 1300
1500 250 1000 1250
1600 250 600 1120 1360 920 750 1400 1700 1150
1650 250 1160 1450
1800 250 680 1120 1360 1120 850 1400 1700 1400
1950 250 1320 1650
2000 250 840 1160 1560 1480 1050 1450 1950 1850
2100 250 1520 1900
2200 250 880 1480 1640 1100 1850 2050
2250 250 1840 2300
2400 250 920 1520 2040 1150 1900 2550
2550 250 2320 2900
2600 250 1120 1560 2560 1400 1950 3200
2700 250 2560 3200
2800 250 2680 1450 2050 3350
2850 250 2960 3700
3000 250 1160 1880 3200 1450 2350 4000
DN < 3000 - 5000 on request
67
Installation and Maintenance Information for Type 64
Storage The compensators are manufactured from highly flexible
materials. The durability depends on careful and correct
The compensators should be stored under clean and dry installation. Sharp edges and folds must be avoided and care
conditions and must be protected against mechanical damage. must be taken when lifting compensators during installation.
Do not unpack the compensator until ready for installation.
Protective covers should be left on as long as possible. It is recommended to use a supporting plate or an internal
Transportation support devices must not be removed frame for lifting purposes. Preferably, a compensator should
until the compensator is in position in the pipeline system. be pre-assembled with backing flanges and internal sleeve
(if included in the delivery) on the ground before lifting.
Installation Ducting flanges / tolerances
Do not start installation until all work on the ducting and If the delivery includes ducting flanges, backing flanges or
flanges has been completed and all anchors and supports other steel parts, check that the measurements correspond
have been fitted. This serves to prevent any damage to the with the drawings and that bolt holes are arranged symmetrical
compensator through welding sparks, sharp objects etc. in each flange.
and ensure that the compensator is not over-stressed.
The bolts must be retightened 24 hours after installation of the
The bellow must not be painted or insulated. compensator.
Plates for the assembly of compensators with welding flanges.
Bolt torque
Backing flanges 40 x 10 50 x 10 60 x 10 60 x 12
bolts M10 M12 M12 M16
NBR 60 Nm 70 Nm 80 Nm 80 Nm
EPDM 60 Nm 80 Nm 80 Nm 80 Nm
VITON 80 Nm 80 Nm 80 Nm
Spacer for Install Rubber Expansion Joints

with Slip-on Flanges
DN 32 DN 40 DN 50 DN 65 DN 80 DN 100 DN 125 DN 150 DN 175 DN 200 DN 250 DN 300
A B A B A B A B A B A B A B A B A B A B A B A B
32 82 40 92 50 107 65 127 80 142 100 162 125 192 150 218 175 248 200 273 250 328 300 378
68
Installation Instructions for Type 80
1. Protective covers 5. Painting / Insulation
These serve to protect the beading sealing surface The compensator bellows must not be insulated
against mechanical damage and must only be or painted. Splash protection covers must be fitted
removed directly prior to assembly. If removal for so that heat accumulation in the area of the bellow
the purpose of inspection is necessary, the protective is avoided through heat transmission.
covers must subsequently be bolted tight.
6. Commissioning
2. Welding, soldering and brazing on the lined After reaching operating temperature, the flange
components is not permitted as this can damage the connections should retightened with the specified
high- quality lining and give rise to the release of torque. In case of leakages, the flange connections
highly toxic gases. must be checked for parallelism or soiling or damage
of the sealing face. Minor indentations or damage can
3. The use of seals between PTFE/PTFE sealing faces be removed with emery cloth.
is unnecessary. For connections to glass, ceramics,
enamel and other components, an approximately 7. Installation of compensators
5 mm thick PTFE seal is recommended. In additon to the aforementioned, the tie rods must
not be removed after adjustment to maximum
4. Installation expansion or after installation.
To prevent deformation of the sealing faces through
overtightened bolts, the following torques should be
referred to as a guide during assembly. (The values
apply to flanged joints up to PN 25 for bolts with
lubricated thread.)
Flange connection dimensions according to DIN 2501
PN 10 PN 25
DN Screws Md Screws Md
Quantity Thread NM Quantity Thread NM
20 4 M 12 10 4 M 12 10
25 4 M 12 20 4 M 12 20
32 4 M 16 30 4 M 16 30
40 4 M 16 40 4 M 16 40
50 4 M 16 50 4 M 16 50
65 4 M 16 70 8 M 16 40
80 8 M 16 40 8 M 16 40
100 8 M 16 40 8 M 20 50
125 8 M 16 50 8 M 24 80
150 8 M 20 60 8 M 24 90
200 8 M 20 90 12 M 24 100
250 12 M 20 60 12 M 27 120
300 12 M 20 70
350 16 M 20 110
400 16 M 24 160
500 20 M 24 180
600 20 M 27 240
700 24 M 27 260
69
Sealing Profile of the Rubber Bellows
Type 50 Type 39 Type 49

Type 53 Type 55 Design S
Type 55 Design E
Type 55 Type 50/53 Type 49 Type 39

DN ±2 ±2 ~ ±2 ±2 ~ ±2 ±2 ~ ±4 ±4 ~
C1/2 B1/2 A1/2 A/D C1 B1 A1 A/D C3 B3 A3 A/D C2 B2 A2 A/D
25 65 37 28.5 30 65 37 28.5 30
32 65 37 28.5 30 65 37 28.5 30 79 42 35 37
40 74 42 36 39 74 42 36 39 79 42 35 37 79 42 36 39
50 92 55 45 48 92 55 45 48 89 57 45 47 89 55 45 48
65 105 71 60.5 64 105 71 60.5 64 104 69 59 61 104 71 60.5 64
80 118 81 74 77 118 81 74 77 119 86 75 77 119 81 74 77
100 137 106 94 98 137 106 94 98 149 110 98 100 149 106 94 98
125 166 132 121 125 166 132 121 125 169 137 125 127 169 132 121 125
150 192 160 147 151 192 160 147 151 195 164 149 151 195 160 147 151
175 220 182 173 175 220
200 252 213 202 206 252 213 202 206 245 200 197 200 245 202 195 199
250 304 257 250 254 304 257 250 254 295 256 252 255 298 247 244 248
300 354 309 300 304 354 309 300 304 345 304 299 302 351 302 298 302
350 412 350 330 340 412 350 330 340 396 358 354 357 412 340 330 330
400 470 414 404 408 470 414 404 408 450 405 402 405 470 410 390 390
450 512 445 445 450 512 449 439 439
500 570 514 504 508 570 514 504 508 550 508 504 507 570 500 490 490
600 675 611 603 607 675 611 603 607 675 597 587 587
700 780 708 680 695 780 708 680 695 780 701 691 691
800 887 813 801 805 887 813 801 805 887 801 791 791
900 985 907 897 900 985 907 897 900 985 898 888 888
1000 1085 1007 997 1000 1085 1007 997 1000 1085 998 988 988
70
PN 6 PN 10 PN 16 PN 25 ASA 150 lb. DN
DN øD øpc n ød Thread øD øPC n ød Thread øD ø pc n ød Thread øD øpc n ød Thread øD ø pc n ød Thread
mm mm mm .d mm mm d mm mm d mm mm d mm mm d inch
25 100 75 4 11 M10 115 85 4 14 M12 115 85 4 14 M12 - - - - - 108.0 79.2 4 15.7 1/ 1
32 120 90 4 14 M12 140 100 4 18 M16 140 100 4 18 M16 - - - - - 117.0 89.0 4 15.7 1/2 1 1/4
2
40 130 100 4 14 M12 150 110 4 18 M16 150 110 4 18 M16 150 110 4 18 M16 127.0 98.4 4 15.7 1/ 1 1/2
2
50 140 110 4 14 M12 165 125 4 18 M16 165 125 4 18 M16 165 125 4 18 M16 152.4 120.6 4 19.0 5/ 2
8
65 160 130 4 14 M12 185 145 4 18 M16 185 145 4 18 M16 185 145 8 18 M16 177.8 139.7 4 19.0 5/ 2 1/2
8
80 190 150 4 18 M16 200 160 8 18 M16 200 160 8 18 M16 200 160 8 18 M16 190.5 152.4 4 19.0 5/ 3
8
100 210 170 4 18 M16 220 180 8 18 M16 220 180 8 18 M16 235 190 8 22 M20 228.6 190.5 8 19.0 5/ 4
8
125 240 200 8 18 M16 250 210 8 18 M16 250 210 8 18 M16 270 220 8 26 M24 254.0 215.9 8 22.2 3/ 5
4
150 265 225 8 18 M16 285 240 8 22 M20 285 240 8 22 M20 300 250 8 26 M24 279.4 241.3 8 22.2 3/ 6
4
175 295 255 8 18 M16 315 270 8 22 M20 315 270 8 22 M20 330 280 12 26 M24 311.2 269.9 8 22.2 3/ 7
4
200 320 280 8 18 M16 340 295 8 22 M20 340 295 12 22 M20 360 310 12 26 M24 342.9 298.4 8 22.2 3/ 8
4
Flange Mating Dimensions
250 375 335 12 18 M16 395 350 12 22 M20 405 355 12 26 M24 425 370 12 30 M27 406.4 361.9 12 25.4 7/ 10
8
300 440 395 12 22 M20 445 400 12 22 M20 460 410 12 26 M24 485 430 16 30 M27 482.6 431.8 12 25.4 7/ 12
8
350 490 445 12 22 M20 505 460 16 22 M20 520 470 16 26 M24 555 490 16 33 M30 533.4 476.2 12 28.6 1 14
400 540 495 16 22 M20 565 515 16 26 M24 580 525 16 30 M27 620 550 16 36 M33 596.9 539.7 16 28.6 1 16
450 595 550 16 22 M20 615 565 20 26 M24 640 585 20 30 M27 - - - - - 635.0 577.8 16 31.7 1 1/ 18
8
500 645 600 20 22 M20 670 620 20 26 M24 715 650 20 33 M30 730 660 20 36 M33 698.5 635.0 20 31.7 1 1/ 20
8
600 755 705 20 26 M24 780 725 20 30 M27 840 770 20 36 M33 845 770 20 39 M36 812.8 749.3 20 34.9 1 1/
4 24
700 860 810 24 26 M24 895 840 24 30 M27 910 840 24 36 M33 960 875 24 42 M39 927.1 863.6 24 34.9 1 1/
4 28
750 - - - - - - - - - - - - - - - - - - - - 984.2 914.4 28 34.9 1 1/
4 30
800 975 920 24 30 M27 1015 950 24 33 M30 1025 950 24 39 M36 1085 990 24 48 M45 1060.4 977.9 28 41.3 1 1/
2 32
900 1075 1020 24 30 M27 1115 1050 28 33 M30 1125 1050 28 39 M36 1185 1090 28 48 M45 1168.4 1085.8 32 41.3 1 1/2 36
1000 1175 1120 28 30 M27 1230 1160 28 36 M33 1255 1170 28 42 M39 1320 1210 28 56 M52 1289.0 1200.1 36 41.3 1 1/2 40
1100 1290 1230 28 33 M30 1345 1270 32 36 M33 1370 1280 28 48 M45 - - - - -
1200 1405 1340 32 33 M30 1455 1380 32 39 M36 1485 1390 32 48 M45 1530 1420 32 62 M56
1300 1520 1450 32 36 M33 1565 1485 32 42 M39 1585 1490 36 48 M45 - - - - -
1400 1630 1560 36 36 M33 1675 1590 36 42 M39 1685 1590 36 48 M45 1755 1640 36 62 M56
1500 1730 1660 36 36 M33 1795 1705 36 48 M45 1810 1705 36 56 M52 - - - - -
1600 1830 1760 40 36 M33 1915 1820 40 48 M45 1930 1820 40 56 M52 1975 1860 40 62 M56
1700 1940 1865 40 39 M36 2015 1920 44 48 M45 2030 1920 44 56 M52 - - - - -
1800 2045 1970 44 39 M36 2115 2020 44 48 M45 2130 2020 44 56 M52 2195 2070 44 70 M64
1900 2155 2075 44 42 M39 2220 2125 48 48 M45 2240 2125 44 62 M56 - - - - -
2000 2265 2180 48 42 M39 2325 2230 48 48 M45 2345 2230 48 62 M56 2445 2300 48 70 M64
2100 2375 2285 48 42 M39 2440 2335 48 56 M52 - - - - - - - - - -
2200 2475 2390 52 42 M39 2550 2440 52 56 M52 2555 2440 52 62 M56 - - - - -
2400 2685 2600 56 42 M39 2760 2650 56 56 M52 2765 2650 56 62 M56 - - - - -
71
WILLBRANDT KG
Schnackenburgallee 180
22525 Hamburg
Germany
Phone +49 40 540093-0
Fax +49 40 540093-47
eMail info@willbrandt.de
Subsidiary Berlin
Breitenbachstraße 7 - 9
13509 Berlin
Germany
Phone +49 30 435502-25
Fax +49 30 435502-20
eMail berlin@willbrandt.de
Subsidiary Hanover
Großer Kolonnenweg 18
30163 Hannover
Germany
Phone +49 511 99046-0
Fax +49 511 99046-30
eMail hannover@willbrandt.de
WILLBRANDT Gummiteknik ApS

Finlandsgade 29
4690 Haslev
Denmark
Vibration Technology Phone +45 56870164
Expansion Joints Fax +45 56872208
Noise Protection Systems eMail info@willbrandt.dk
web www.willbrandt.dk
158-2-09/08-HD
Profiles and Moulded Parts

Power Transmission Elements
Special Sealings
Rubber for Ship and Harbour www.willbrandt.de

The Compensator Catalogue: Willbrandt

Uploaded by

Copyright:

Available Formats

The Compensator Catalogue: Willbrandt

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

The Compensator Catalogue: Willbrandt

Uploaded by

Copyright:

Available Formats

WILLBRANDT

Tie Bars / Restraints 49

Stainless Steel Compensators 53

Stainless Steel Hose Hype 310 / 311 55

Fabric Compensator Hype 300-GEW 58

Planning, Installation and Maintenance Instructions 59

Installation and Maintenance for all Solid Flange 64

Flange Bolt Torques (Nm)

Installation and Maintenance Instructions for Type 64 68

Installation Instructions for Type 80 69

Sealing Profile of the Rubber Bellows 70

Flange Mating Dimensions 71

Type DN-range 50 - 1000 Fields of Application

Type DN-range 50 - 250 Type DN-range 20 - 200

Type DN-range 32 - 500 Type DN-range 50 - 1000

Fields of Application Fields of Application

Type DN-range 50 - 600 Fields of Application

EPDM Steel cord EPDM red-red-blue 16/130 / 16/130 / 16/110 / / / / / / / / / / / / /

Perbunan Aramide/ Perbunan

Hypalon Aramide/ Hypalon

Hypalon Nylon cord Hypalon

Chloroprene Nylon cord Chloroprene

Viton Aramide/ Chloroprene

Viton Aramide/ EPDM

Special manufacture for higher pressure and temperature is available on request.

Abbreviation Name Properties

Viton® FPM Fluorine- Particularly suited to high temperatures.

PTFE Polytetrafluorine- Total resistance to all media.

For chemical resistance please see our resistance tables.

The compensator is self-sealing, no additional gaskets

Characteristics for type 39

Bellow Bellow design Permissible operating data Electrical Hard-

Type 39 For the food and beverage industry

Type 39 For chemical plants

Type 39 For oils, fuels, gases

Type 39 For chemical plants

Overall length Bellow Flange PN 10 Movement absorption

Details for type 40

Bellow Core Reinforcing material Cover Pressure Temperature

red EPDM Nyloncord EPDM 18 90

Thick- Reinforcing material

DN Overall length 0 bar 1 bar 2,5 bar 4 bar 6 bar 10 bar

200 200 45 79 90 144 216 360

250 200 51 88 107 166 246 405

300 200 56 98 118 180 269 454

350 200 73 129 153 239 350 599

400 250 40 70 83 131 190 322

450 250 48 85 102 152 235 389

500 250 55 99 118 171 265 457

600 250 68 119 136 218 326 544

700 250 70 121 147 228 338 557

750 250 72 126 151 232 346 583

800 250 73 129 153 239 350 599

900 300 95 169 202 300 466 770

1000 300 136 245 291 422 656 1129

1100 350 210 399 462 756 1130 1865

1200 350 240 458 538 876 1277 2136

1400 350 245 463 532 902 1316 2193

1500 350 255 492 587 944 1403 2295