Rescue Plan: Fall Protection Program
Rescue Plan: Fall Protection Program
Rescue Plan: Fall Protection Program
95 Derby Street
IN FALL PROTECTION Silverwater, NSW
2128
RESCUE PLAN
www.capitalsafety.com.au
RESCUE PLAN
This document is intended to provide guidance only for developing
site-specific working at heights rescue plans.
1.0 PURPOSE
The purpose of this work instruction is to establish company wide guidelines for
responding to a fall at heights. This work instruction should ensure that the victim’s
health risks are minimised during a fall. The rescue plan shall minimise the amount of at
risk behavior of the rescuer during the rescue attempt, and that the rescue is conducted
in a safe and professional manner.
2.0 APPLICATION
2.1 This work instruction will apply at all locations where personnel are employed
2.2 The requirements of this work instruction are to be observed by all personnel
involved in working at heights where a fall hazard exists
2.3 This work instruction shall be reviewed and included in a Safe Work Method
Statement (SWMS) f any or activity that require working at heights of 2m and
above or where a fall hazard exists
3.0 DEFINITIONS
3.2 Self Rescue – An act or instance of an worker using his fall protection equipped
to perform a self-rescue
4.0 RESPONSIBILITIES
4.1 Worker:
• Trained and familiar with the content of the Fall Protection Program
• Able to understand and evaluate the risks associated with working at heights
• Trained and competent in the use of fall protection equipment prior to working at
heights.
• Able to report unsafe conditions and/or behaviors to the Person-In-Charge.
5.0 PROCEDURE
5.1 A rescue plan must be a part of the Safe Work Method Statement (SWMS) for any
job that is to be performed that requires work at height. The rescue plan shall
include consideration of the following rescue types and circumstances:
3
5.1.1. Self Rescue
4
4. Remove all necessary components of his fall arrest system from
service and document (bag and tag) the components involved in the
fall with name, date and activity at time of fall and give them to
manager.
1. A worker will get into the man-cage and make sure there is a second
fall protection device such as shock absorbing lanyard or self
retracting lifeline available for the rescued worker.
2. The Man-cage will be maneuvered into position (raise up under
the worker to be rescued) to perform the rescue.
3. Attach the second lanyard or self retracting lifeline in the man-cage
to the worker being rescued.
4. Disconnect the rescued worker from the impacted fall arrest
equipment.
5. Lower the worker to the ground and take care of the rescued worker
medically as needed.
6. Remove all necessary components of his fall arrest system from
service and document (bag and tag) with name, date and activity at
time of fall and give them to the manager.
5
Rescue Plan
IMPORTANT: This document is intended to provide guidance only for developing
site-specific working at heights rescue plans.
__________________________________________________________________________________
Location:__________________________________________________________________________
__________________________________________________________________________________
Describe the tasks that will be done prior to work to prevent a fall and the step by step process that will
be followed in the event of a fall.