Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 93 views

    Trans DC

    Uploaded by

    Tej Charan
    This document contains the output from a circuit simulation using Cadence Spectre. It provides details of the simulation such as the circuit being simulated, operating conditions, analysis types performed and timing information. Transient, DC and parameter sweeps were performed on a circuit consisting of BSIM3 MOSFETs and resistors. Simulation results and performance are also reported.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    Trans DC

    Uploaded by

    Tej Charan
    93 views5 pages
    This document contains the output from a circuit simulation using Cadence Spectre. It provides details of the simulation such as the circuit being simulated, operating conditions, analysis types performed and timing information. Transient, DC and parameter sweeps were performed on a circuit consisting of BSIM3 MOSFETs and resistors. Simulation results and performance are also reported.

    Original Title

    trans dc

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains the output from a circuit simulation using Cadence Spectre. It provides details of the simulation such as the circuit being simulated, operating conditions, analysis types performed and timing information. Transient, DC and parameter sweeps were performed on a circuit consisting of BSIM3 MOSFETs and resistors. Simulation results and performance are also reported.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    93 views5 pages

    Trans DC

    Uploaded by

    Tej Charan
    This document contains the output from a circuit simulation using Cadence Spectre. It provides details of the simulation such as the circuit being simulated, operating conditions, analysis types performed and timing information. Transient, DC and parameter sweeps were performed on a circuit consisting of BSIM3 MOSFETs and resistors. Simulation results and performance are also reported.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    of 5

    Cadence (R) Virtuoso (R) Spectre (R) Circuit Simulator

    Version 12.1.0.347.isr3 32bit -- 10 Jan 2013


    Copyright (C) 1989-2012 Cadence Design Systems, Inc. All rights reserved worldwide.
    Cadence, Virtuoso and Spectre are registered trademarks of Cadence Design Systems,
    Inc. All others are the property of their respective holders.

    Protected by U.S. Patents:


    5,610,847; 5,790,436; 5,812,431; 5,859,785; 5,949,992; 5,987,238;
    6,088,523; 6,101,323; 6,151,698; 6,181,754; 6,260,176; 6,278,964;
    6,349,272; 6,374,390; 6,493,849; 6,504,885; 6,618,837; 6,636,839;
    6,778,025; 6,832,358; 6,851,097; 6,928,626; 7,024,652; 7,035,782;
    7,085,700; 7,143,021; 7,493,240; 7,571,401.

    Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA


    Security, Inc.

    User: buet Host: cadence HostID: 7F0100 PID: 6374


    Memory available: 775.4956 MB physical: 1.9851 GB
    CPU Type: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz
    Processor PhysicalID CoreID Frequency
    0 0 0 2112.0
    1 0 1 2112.0
    2 1 0 2112.0
    3 1 1 2112.0

    Simulating `input.scs' on cadence at 6:50:29 PM, Mon Mar 22, 2021 (process id:
    6374).
    Current working directory:
    /home/buet/simulation/inv_test/spectre/schematic/netlist.
    Command line:
    /home/buet/cadence/MMSIM121/tools.lnx86/spectre/bin/32bit/spectre \
    input.scs +escchars +log ../psf/spectre.out +inter=mpsc \
    +mpssession=spectre1_3337_3 -format psfxl -raw ../psf \
    +lqtimeout 900 -maxw 5 -maxn 5
    spectre pid = 6374

    Loading /home/buet/cadence/MMSIM121/tools.lnx86/cmi/lib/5.0/libinfineon_sh.so ...


    Loading /home/buet/cadence/MMSIM121/tools.lnx86/cmi/lib/5.0/libphilips_o_sh.so ...
    Loading /home/buet/cadence/MMSIM121/tools.lnx86/cmi/lib/5.0/libphilips_sh.so ...
    Loading /home/buet/cadence/MMSIM121/tools.lnx86/cmi/lib/5.0/libsparam_sh.so ...
    Loading /home/buet/cadence/MMSIM121/tools.lnx86/cmi/lib/5.0/libstmodels_sh.so ...
    Reading file: /home/buet/simulation/inv_test/spectre/schematic/netlist/input.scs
    Reading file: /home/buet/cadence/gpdk090_v4.6/models/spectre/gpdk090.scs
    Reading file: /home/buet/cadence/gpdk090_v4.6/models/spectre/gpdk090_mos.scs
    Reading file: /home/buet/cadence/gpdk090_v4.6/models/spectre/gpdk090_mos_iso.scs
    Reading file: /home/buet/cadence/gpdk090_v4.6/models/spectre/gpdk090_resistor.scs
    Reading file: /home/buet/cadence/gpdk090_v4.6/models/spectre/resd_va.va
    Reading link:
    /home/buet/cadence/MMSIM121/tools.lnx86/spectre/etc/ahdl/discipline.h
    Reading file:
    /home/buet/cadence/MMSIM121/tools.lnx86/spectre/etc/ahdl/disciplines.vams
    Reading link: /home/buet/cadence/MMSIM121/tools.lnx86/spectre/etc/ahdl/constants.h
    Reading file:
    /home/buet/cadence/MMSIM121/tools.lnx86/spectre/etc/ahdl/constants.vams
    Reading file: /home/buet/cadence/gpdk090_v4.6/models/spectre/rnoise_va.va
    Reading file: /home/buet/cadence/gpdk090_v4.6/models/spectre/gpdk090_capacitor.scs
    Reading file: /home/buet/cadence/gpdk090_v4.6/models/spectre/gpdk090_diode.scs
    Reading file: /home/buet/cadence/gpdk090_v4.6/models/spectre/gpdk090_bipolar.scs

    Time for NDB Parsing: CPU = 355.945 ms, elapsed = 323.578 ms.
    Time accumulated: CPU = 355.945 ms, elapsed = 323.578 ms.
    Peak resident memory used = 32.2 Mbytes.

    Time for Elaboration: CPU = 14.997 ms, elapsed = 16.259 ms.


    Time accumulated: CPU = 371.942 ms, elapsed = 340.129 ms.
    Peak resident memory used = 34.7 Mbytes.

    Time for EDB Visiting: CPU = 0 s, elapsed = 792.027 us.


    Time accumulated: CPU = 372.942 ms, elapsed = 341.193 ms.
    Peak resident memory used = 35 Mbytes.

    Warning from spectre during initial setup.


    WARNING (CMI-2477): I0.PM0: `Rds' = 70.9091 uOhm is less than 0.001. Set to 0.

    Circuit inventory:
    nodes 3
    bsim3v3 2
    vsource 2

    Warning from spectre during initial setup.


    WARNING (CMI-2477): I0.PM0: `Rds' = 70.9091 uOhm is less than 0.001. Set to 0.

    Time for parsing: CPU = 5 ms, elapsed = 91.1679 ms.


    Time accumulated: CPU = 378.942 ms, elapsed = 432.641 ms.
    Peak resident memory used = 35.7 Mbytes.

    Entering remote command mode using MPSC service (spectre, ipi, v0.0,
    spectre1_3337_3, ).

    Warning from spectre.


    WARNING (SPECTRE-16707): Only tran supports psfxl format, result of other
    analyses will be in psfbin format.

    ************************************************
    Transient Analysis `tran': time = (0 s -> 20 ns)
    ************************************************
    DC simulation time: CPU = 2 ms, elapsed = 16.1369 ms.
    Important parameter values:
    start = 0 s
    outputstart = 0 s
    stop = 20 ns
    step = 20 ps
    maxstep = 400 ps
    ic = all
    useprevic = no
    skipdc = no
    reltol = 1e-03
    abstol(V) = 1 uV
    abstol(I) = 1 pA
    temp = 27 C
    tnom = 27 C
    tempeffects = all
    errpreset = moderate
    method = traponly
    lteratio = 3.5
    relref = sigglobal
    cmin = 0 F
    gmin = 1 pS

    tran: time = 572.6 ps (2.86 %), step = 262.5 ps (1.31 %)


    tran: time = 1.686 ns (8.43 %), step = 313.7 ps (1.57 %)
    tran: time = 2.838 ns (14.2 %), step = 383.8 ps (1.92 %)
    tran: time = 3.638 ns (18.2 %), step = 400 ps (2 %)
    tran: time = 4.66 ns (23.3 %), step = 306.1 ps (1.53 %)
    tran: time = 5.73 ns (28.6 %), step = 270.1 ps (1.35 %)
    tran: time = 6.568 ns (32.8 %), step = 249.1 ps (1.25 %)
    tran: time = 7.684 ns (38.4 %), step = 315.8 ps (1.58 %)
    tran: time = 8.562 ns (42.8 %), step = 257.1 ps (1.29 %)
    tran: time = 9.681 ns (48.4 %), step = 319.1 ps (1.6 %)
    tran: time = 10.59 ns (52.9 %), step = 258.7 ps (1.29 %)
    tran: time = 11.69 ns (58.5 %), step = 306.4 ps (1.53 %)
    tran: time = 12.58 ns (62.9 %), step = 268.4 ps (1.34 %)
    tran: time = 13.69 ns (68.5 %), step = 307.8 ps (1.54 %)
    tran: time = 14.87 ns (74.4 %), step = 400 ps (2 %)
    tran: time = 15.67 ns (78.4 %), step = 400 ps (2 %)
    tran: time = 16.54 ns (82.7 %), step = 248.4 ps (1.24 %)
    tran: time = 17.67 ns (88.4 %), step = 327.9 ps (1.64 %)
    tran: time = 18.58 ns (92.9 %), step = 254.6 ps (1.27 %)
    tran: time = 19.69 ns (98.4 %), step = 310.5 ps (1.55 %)
    Number of accepted tran steps = 323

    Notice from spectre during transient analysis `tran'.


    Trapezoidal ringing is detected during tran analysis.
    Please use method=trap for better results and performance.

    Initial condition solution time: CPU = 2 ms, elapsed = 16.223 ms.


    Intrinsic tran analysis time: CPU = 18.997 ms, elapsed = 73.5581 ms.
    Total time required for tran analysis `tran': CPU = 23.996 ms, elapsed = 93.4761
    ms.
    Time accumulated: CPU = 407.937 ms, elapsed = 645.915 ms.
    Peak resident memory used = 37.2 Mbytes.

    finalTimeOP: writing operating point information to rawfile.

    ******************
    DC Analysis `dcOp'
    ******************
    Important parameter values:
    reltol = 1e-03
    abstol(V) = 1 uV
    abstol(I) = 1 pA
    temp = 27 C
    tnom = 27 C
    tempeffects = all
    gmindc = 1 pS
    Convergence achieved in 6 iterations.
    Total time required for dc analysis `dcOp': CPU = 3 ms, elapsed = 3.45707 ms.
    Time accumulated: CPU = 421.935 ms, elapsed = 667.089 ms.
    Peak resident memory used = 37.4 Mbytes.

    dcOpInfo: writing operating point information to rawfile.

    **************************************
    DC Analysis `dc': V1:dc = (0 V -> 1 V)
    **************************************
    Important parameter values:
    reltol = 1e-03
    abstol(V) = 1 uV
    abstol(I) = 1 pA
    temp = 27 C
    tnom = 27 C
    tempeffects = all
    gmindc = 1 pS
    dc: dc = 40 mV (4 %), step = 20 mV (2 %)
    dc: dc = 60 mV (6 %), step = 20 mV (2 %)
    dc: dc = 80 mV (8 %), step = 20 mV (2 %)
    dc: dc = 100 mV (10 %), step = 20 mV (2 %)
    dc: dc = 120 mV (12 %), step = 20 mV (2 %)
    dc: dc = 140 mV (14 %), step = 20 mV (2 %)
    dc: dc = 160 mV (16 %), step = 20 mV (2 %)
    dc: dc = 180 mV (18 %), step = 20 mV (2 %)
    dc: dc = 200 mV (20 %), step = 20 mV (2 %)
    dc: dc = 220 mV (22 %), step = 20 mV (2 %)
    dc: dc = 240 mV (24 %), step = 20 mV (2 %)
    dc: dc = 260 mV (26 %), step = 20 mV (2 %)
    dc: dc = 280 mV (28 %), step = 20 mV (2 %)
    dc: dc = 300 mV (30 %), step = 20 mV (2 %)
    dc: dc = 320 mV (32 %), step = 20 mV (2 %)
    dc: dc = 340 mV (34 %), step = 20 mV (2 %)
    dc: dc = 360 mV (36 %), step = 20 mV (2 %)
    dc: dc = 380 mV (38 %), step = 20 mV (2 %)
    dc: dc = 400 mV (40 %), step = 20 mV (2 %)
    dc: dc = 420 mV (42 %), step = 20 mV (2 %)
    dc: dc = 440 mV (44 %), step = 20 mV (2 %)
    dc: dc = 460 mV (46 %), step = 20 mV (2 %)
    dc: dc = 480 mV (48 %), step = 20 mV (2 %)
    dc: dc = 500 mV (50 %), step = 20 mV (2 %)
    dc: dc = 520 mV (52 %), step = 20 mV (2 %)
    dc: dc = 540 mV (54 %), step = 20 mV (2 %)
    dc: dc = 560 mV (56 %), step = 20 mV (2 %)
    dc: dc = 580 mV (58 %), step = 20 mV (2 %)
    dc: dc = 600 mV (60 %), step = 20 mV (2 %)
    dc: dc = 620 mV (62 %), step = 20 mV (2 %)
    dc: dc = 640 mV (64 %), step = 20 mV (2 %)
    dc: dc = 660 mV (66 %), step = 20 mV (2 %)
    dc: dc = 680 mV (68 %), step = 20 mV (2 %)
    dc: dc = 700 mV (70 %), step = 20 mV (2 %)
    dc: dc = 720 mV (72 %), step = 20 mV (2 %)
    dc: dc = 740 mV (74 %), step = 20 mV (2 %)
    dc: dc = 760 mV (76 %), step = 20 mV (2 %)
    dc: dc = 780 mV (78 %), step = 20 mV (2 %)
    dc: dc = 800 mV (80 %), step = 20 mV (2 %)
    dc: dc = 820 mV (82 %), step = 20 mV (2 %)
    dc: dc = 840 mV (84 %), step = 20 mV (2 %)
    dc: dc = 860 mV (86 %), step = 20 mV (2 %)
    dc: dc = 880 mV (88 %), step = 20 mV (2 %)
    dc: dc = 900 mV (90 %), step = 20 mV (2 %)
    dc: dc = 920 mV (92 %), step = 20 mV (2 %)
    dc: dc = 940 mV (94 %), step = 20 mV (2 %)
    dc: dc = 960 mV (96 %), step = 20 mV (2 %)
    dc: dc = 980 mV (98 %), step = 20 mV (2 %)
    dc: dc = 1 V (100 %), step = 20 mV (2 %)
    Total time required for dc analysis `dc': CPU = 5.999 ms, elapsed = 11.8909 ms.
    Time accumulated: CPU = 439.932 ms, elapsed = 690.352 ms.
    Peak resident memory used = 37.5 Mbytes.

    modelParameter: writing model parameter values to rawfile.


    element: writing instance parameter values to rawfile.
    outputParameter: writing output parameter values to rawfile.
    designParamVals: writing netlist parameters to rawfile.
    primitives: writing primitives to rawfile.
    subckts: writing subcircuits to rawfile.

    You might also like