Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Excalibur 7018 MR: Conformances Key Features

    Uploaded by

    Asongwe Hans
    33 views2 pages
    MSDS7018

    Original Title

    Lincoln7018pecSheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    MSDS7018

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    33 views2 pages

    Excalibur 7018 MR: Conformances Key Features

    Uploaded by

    Asongwe Hans
    MSDS7018

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    STICK (SMAW) ELECTRODE

    ® ®

    Excalibur 7018 MR
    Mild Steel, Low Hydrogen • AWS E7018 H4R

    Key Features Conformances


    Premium arc performance AWS A5.1/A5.1M: 2004 E7018 H4R
    Square coating burn-off ASME SFA-A5.1: E7018 H4R
    ABS: 3Y H5
    Easy strike and re-strike
    Lloyd’s Register: 3YM H5
    Effortless slag removal DNV Grade: 3 YH5
    Minimal spatter for enhanced operability GL: 3YH5
    and clean weld surface BV Grade: 3YHHH
    CWB/CSA W48-06: E4918
    Typical Applications
    EN ISO 2560-B: E4918 A H5
    Mild steel Pressure vessels
    Power generation Pressure piping Welding Positions
    Petrochemical All, except vertical down

    DIAMETERS / PACKAGING
    Diameter Length 1 lb (0.5 kg) Plastic Tube 10 lb (4.5 kg) Easy Open Can 50 lb (22.7kg)
    in (mm) in (mm) 6 lb (2.7 kg) Master Carton 30 lb (13.6 kg) Master Carton Carton
    3/32 (2.4) 14 (350) ED032086 ED032588 ED028280
    1/8 (3.2) 14 (350) ED031468 ED032589 ED028281
    5/32 (4.0) 14 (350) ED032590 ED028282
    3/16 (4.8) 14 (350) ED028283
    7/32 (5.6) 18 (450) ED028917
    1/4 (6.4) 18 (450) ED028918

    MECHANICAL PROPERTIES (1) – As Required per AWS A5.1/A5.1M: 2004


    Charpy V-Notch
    Yield Strength(2) Tensile Strength Elongation J (ft•lbf)
    MPa (ksi) MPa (ksi) % @ -29°C (-20°F)
    Requirements - AWS E7018 H4R 400 (58) min. 490 (70) min. 22 min. 27 (20) min.
    Typical Results(3) - As-Welded 430-510 (62-74) 510-605 (74-88) 25-37 121-332 (89-246)
    DEPOSIT COMPOSITION(1) – As Required per AWS A5.1/A5.1M: 2004
    %C %Mn %Si %P %S %Ni
    Requirements - AWS E7018 H4R 0.15 max. 1.60 max. 0.75 max. 0.035 max. 0.035 max. 0.30 max.
    Typical Results(3) 0.03-0.08 1.01-1.55 0.34-0.68 0.01-0.02 ) 0.01 0.01-0.06
    %Mn + Ni + Cr Diffusible Hydrogen
    %Cr %Mo %V + Mo + V (mL/100g weld metal)
    Requirements - AWS E7018 H4R 0.20 max. 0.30 max. 0.08 max. 1.75 max. 4.0 max.
    Typical Results(3) 0.02-0.07 ) 0.05 ) 0.02 1.04-1.75 2-3
    TYPICAL OPERATING PROCEDURES
    Current (Amps)
    (4)
    Polarity 3/32 in (2.4 mm) 1/8 in (3.2 mm) 5/32 in (4.0 mm) 3/16 in (4.8 mm) 7/32 in (5.6 mm) 1/4 in (6.4 mm)
    DC+ 70-110 90-160 130-210 180-300 250-330 300-400
    AC 80-120 100-160 140-210 200-300 270-370 325-420
    (1)
    Typical all weld metal. (2)Measured with 0.2% offset. (3)See test results disclaimer below. (4)Preferred polarity is listed first.

    26 ı THE LINCOLN ELECTRIC COMPANY


    Material Safety Data Sheets (MSDS) and Certificates of Conformance are available on our website at www.lincolnelectric.com

    T E S T R ESU LT S
    Test results for mechanical properties, deposit or electrode composition and diffusible hydrogen levels were obtained from a weld produced and tested according to
    prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors,
    including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification
    testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

    CUS T OM E R A SSI STA N C E P O L I C Y


    The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our
    customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond
    to inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees,
    however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not
    warrant or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter
    any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty
    of fitness for any customers’ particular purpose is specifically disclaimed.

    Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole
    responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service
    requirements.

    Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.

    THE LINCOLN ELECTRIC COMPANY


    22801 St. Clair Avenue • Cleveland, OH • 44117-1199 • U.S.A.
    Phone: +1.216.481.8100 • www.lincolnelectric.com
    © Lincoln Global, Inc. All Rights Reserved.
    Issue Date 01/12

    You might also like