Professional Documents
Culture Documents
G-Series Back Pressure Valves: Features
G-Series Back Pressure Valves: Features
188 Creekside Dr
Amherst, NY 14228 USA G-SERIES
Phone: +1 716 835-0891
Fax: +1 716 835-0893
sales@griffcovalve.com
BACK PRESSURE VALVES
www.griffcovalve.com
Features:
Molded Noryl Top
High Reliability/Low Cost
Molded PTFE/EPDM Diaphragm
Adjustable Relief Settings
Optional Pressure Rated Valves
Anti-Siphon Function
Robust, Machined Construction
Tamper Resistant Adjustment Screw
Wide Range of Materials
Operation:
Griffco diaphragm back pressure valves apply positive
discharge pressure to a metering pump system to
prevent siphoning and eliminate varying dosage rates
caused by fluctuating downstream pressure. The
diaphragm is held against the valve seat by an internal
spring. When the preset pressure is exceeded, the
diaphragm is forced up and chemical flows through the
valve to the injection point. The valves are preset for 50
psi, however they are field adjustable from 10 - 150 psi
Griffco G-Series diaphragm back pressure valves are via the adjustment screw. Installation should be as
designed to enhance the performance of chemical feed close to the injection point as possible to prevent
systems by applying a continuous back pressure to the chemical line drainage and it is most important that all
chemical feed pump, while also acting as an anti-syphon chemical system equipment such as pulsation
valve. Robust construction ensures reliability in the rigorous dampeners and pressure gauges are between the
service of municipal and industrial applications. Wetted pump and back pressure valve.
materials include: PVC, CPVC, PP, PVDF, PTFE, Halar,
316 SS, A20 and Hast. C. Available sizes: 1/2" – 4”.