Yamaha MCR-840 Service Manual

MICRO COMPONENT SYSTEM MCR-940/MCR-840/MCR-640
RECEIVER/SPEAKER PACKAGE
R-840/NS-BP300
R-840/NS-BP300
SERVICE MANUAL
• When accepting a repair order from the user, it is recommended to receive the R-840 and BD-940/DVD-840/CD-
640 as a set for the repair work.
• The MCR-940 consists of the R-840, BD-940 and NS-BP300.
The MCR-840 consists of the R-840, DVD-840 and NS-BP300.
The MCR-640 consists of the R-840, CD-640 and NS-BP300.
This service manual is for the R-840/NS-BP300. For service manual of the BD-940/DVD-840/CD-640, please refer
to the following publication numbers:
BD-940: 1011 5 4 / DVD-840: 1011 5 5 / CD-640: 1011 5 6
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known
and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise
all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or
the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
■ CONTENTS
TO SERVICE PERSONNEL ............................................2 CONFIRMATION OF IDLING CURRENT OF AMP UNIT ....38–39
SYSTEM COMPOSITION ................................................3 DISPLAY DATA .............................................................40
FRONT PANELS .........................................................4–6 IC DATA ...................................................................41–44
REAR PANELS ......................................................... 7–11 PIN CONNECTION DIAGRAMS .............................45–47
REMOTE CONTROL PANELS ..................................... 12 BLOCK DIAGRAM ........................................................49
SPECIFICATIONS ................................................... 13–15 PRINTED CIRCUIT BOARDS .................................50–62
INTERNAL VIEW .......................................................... 16 SCHEMATIC DIAGRAMS .......................................63–70
DISASSEMBLY PROCEDURES ............................. 17–19 REPLACEMENT PARTS LIST ................................71–79
UPDATING FIRMWARE ..........................................20–24 REMOTE CONTROL .....................................................80
SELF-DIAGNOSTIC FUNCTION ............................25–37 SYSTEM CONNECTOR ..........................................81–82
Copyright © 2009 All rights reserved.

1011 5 3 This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
P.O.Box 1, Hamamatsu, Japan
Downloaded from www.dlmanuals.com '09.11
R-840/NS-BP300
■ TO SERVICE PERSONNEL
AC LEAKAGE
1. Critical Components Information WALL EQUIPMENT TESTER OR
Components having special characteristics are marked and OUTLET UNDER TEST EQUIVALENT
must be replaced with parts having specifications equal to those
originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated INSULATING
TABLE
from supply circuits.
R-840/NS-BP300
• Meter impedance should be equivalent to 1500 ohms shunted • Leakage current must not exceed 0.5mA.
by 0.15 μF. • Be sure to test for leakage with the AC plug in both polarities.
For U model
“CAUTION”
“F1: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 3.5A, 125V
FUSE.”
For C model
CAUTION
F1: REPLACE WITH SAME TYPE 3.5A, 125V FUSE.
ATTENTION
F1: UTILISER UN FUSIBLE DE RECHANGE DE MÉME TYPE DE 3.5A, 125V.
WARNING: CHEMICAL CONTENT NOTICE!

This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or
expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
About lead free solder

All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder.
Among some types of lead free solder currently available, it is recommended to use one of the following types for the
repair work.
• Sn + Ag + Cu (tin + silver + copper)
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth)
Caution:
As the melting point temperature of the lead free solder is about 30°C to 40°C (50°F to 70°F) higher than that of the lead
solder, be sure to use a soldering iron suitable to each solder.
2
Downloaded from www.dlmanuals.com
R-840/NS-BP300
■ SYSTEM COMPOSITION
When accepting a repair order from the user, it is recommended to receive the R-840 and BD-940/DVD-840/CD-640 as a
set for the repair work.
The MCR-940 consists of the R-840, BD-940 and NS-BP300.
The MCR-840 consists of the R-840, DVD-840 and NS-BP300.
The MCR-640 consists of the R-840, CD-640 and NS-BP300.
This service manual is for the R-840/NS-BP300. For service manual of the BD-940/DVD-840/CD-640, please refer to the
following publication numbers:
R-840/NS-BP300
BD-940: 1011 5 4 / DVD-840: 1011 5 5 / CD-640: 1011 5 6
MCR-940
▼ NS-BP300 ▼ NS-BP300
▼ R-840 ▼ BD-940
MCR-840
▼ NS-BP300 ▼ NS-BP300
▼ R-840 ▼ DVD-840
MCR-640
▼ NS-BP300 ▼ NS-BP300
▼ R-840 ▼ CD-640
3
R-840/NS-BP300
■ FRONT PANELS
R-840
Top view
C, T, K, A, B, G, L, V models
R-840/NS-BP300
A, B models
Front view
C, T, K, A, L, V models
4
R-840/NS-BP300
B, G models
R-840/NS-BP300
5
R-840/NS-BP300
NS-BP300
R-840/NS-BP300
6
R-840/NS-BP300
■ REAR PANELS
R-840
C model
R-840/NS-BP300
T model
7
R-840/NS-BP300
K model
R-840/NS-BP300
A model
8
R-840/NS-BP300
B model
R-840/NS-BP300
G model
9
R-840/NS-BP300
L model
R-840/NS-BP300
V model
10
R-840/NS-BP300
NS-BP300
R-840/NS-BP300
C, K, A, B, G, L, V models
T model
11
R-840/NS-BP300
■ REMOTE CONTROL PANELS

MCR-940 MCR-840 MCR-640
B, G, F models C, T, K, A, L, V models G, F models C, L, V models B, G models
R-840/NS-BP300
Key colors
A. Red
B. Green
C. Yellow
D. Blue
12
R-840/NS-BP300
■ SPECIFICATIONS
R-840
■ Audio Section ■ DAB Section [A, B models]
Minimum RMS Output Power (Power Amp. Section) Tuning Range
(L/R drive, 1 kHz, 10 % THD, 6 ohms) ............................................................ 174.0 to 240 MHz (BAND III)
C, T, K, A, B, G, V models .............................................65 W + 65 W
L model .........................................................................60 W + 60 W
■ General
Dynamic Power Per Channel (IHF) (6 / 4 / 2 ohms)
C, T, K, A, B, G, V models ......................................... 60 / 75 / 100 W Power Supply
R-840/NS-BP300
L model ....................................................................... 55 / 70 / 92 W C model .................................................................. AC 120 V, 60 Hz
MAX. Power Per Channel (1 kHz, 0.7 % THD, 4 ohms) [B, G models] T model ................................................................... AC 220 V, 50 Hz
......................................................................................64 W + 64 W
K model .................................................................. AC 220 V, 60 Hz
IEC Power (1 kHz, 0.1 % THD, 6 ohms) [B, G models]
......................................................................................52 W + 52 W A model .................................................................. AC 240 V, 50 Hz
Maximum Power (JEITA) (1 kHz, 10 % THD, 6 ohms) [L, V models] B, G models ............................................................ AC 230 V, 50 Hz
V model ..................................................................................... 65 W L model ...................................................... AC 220–240 V, 50/60 Hz
L model ..................................................................................... 60 W V model ........................................................... AC 110–120 V, 60 Hz
Power Band Width (MAIN L/R drive, 0.1 % THD, 30 W, 6 ohms)
Power Consumption
.................................................................................10 Hz to 50 kHz
C, T, K, L, V models ................................................................ 110 W
Damping Factor (20 Hz to 20 kHz, 6 ohms)
......................................................................................... 60 or more A, B, G models ....................................................................... 115 W
Input Sensitivity/Input Impedance Standby Power Consumption (reference data)
Player etc. ......................................................... 200 mV / 47 k-ohms
......................................................................................0.3 W or less
Maximum Input Voltage (1 kHz, 0.5 % THD)
DVD etc. ................................................................................... 2.8 V Maximum Power Consumption (1 kHz, 10 % THD, 6 ohms) [V model]
Rated Output Voltage/Output Impedance ................................................................................................ 400 W
SUBWOOFER ........................................................................... 1.2 V Dimensions (W x H x D)
Headphone Jack Rated Output/Output Impedance ................................. 215 x 110 x 348 mm (8-1/2" x 4-3/8" x 13-3/4")
(1 kHz, 200 mV, 8 ohms)
Player etc. .............................................................. 130 mV / 8 ohms Weight
Frequency Response (20 Hz to 20 kHz) ............................................................................... 5.7 kg (12.6 lbs.)
Player etc. ......................................................................... 0 ±0.5 dB
Finish
Total Harmonic Distortion (20 Hz to 20 kHz, 30 W, 6 ohms)
Black color ........................................... C, T, K, A, B, G, L, V models
Player etc. to SP OUT .................................................0.04 % or less
Silver color ........................................... C, T, K, A, B, G, L, V models
Signal to Noise Ratio (IHF-A network)
Player (Input shorted 200 mV) ................................. 100 dB or more Accessories
Residual Noise (IHF-A network)
for R-840
PURE DIRECT ON ................................................................. 110 μV
Indoor FM antenna .....................................................................x 1
Channel Separation (DVD etc., Input 5.1 k-ohms shorted)
1 kHz / 10 kHz ................................. 60 dB or more / 45 dB or more DAB wire antenna (B model) .....................................................x 1
Tone Control Characteristics DOCK cover ...............................................................................x 1
Bass for MCR-940/MCR-840/MCR-640
Boost/Cut ........................................................ ±10 dB, step 50 Hz Remote control ...........................................................................x 1
Turnover frequency ............................................................. 350 Hz
Battery (R03, AAA, UM-4) ..........................................................x 2
Treble
Boost/Cut ...................................................... ±10 dB, step 20 kHz Audio pin cable (1.0 m) .............................................................x 1
Turnover frequency ............................................................ 3.5 kHz Video pin cable (1.5 m) ..............................................................x 1
System control cable (0.6 m) .....................................................x 1
■ FM Section USB cap .....................................................................................x 1
Tuning Range
C model ............................................................... 87.5 to 107.9 MHz * Specifications are subject to change without notice due to
T, K, A, B, G, L, V models ................................ 87.50 to 108.00 MHz product improvements.
50 dB Quieting Sensitivity (IHF) (1 kHz, 100 % MOD.)
Mono ...................................................................... 2.8 μV (20.2 dBf)
Signal to Noise Ratio (IHF)

Mono ........................................................................................73 dB
Stereo ......................................................................................70 dB
Harmonic Distortion (1 kHz)

Mono ........................................................................................ 0.5 %
Stereo ...................................................................................... 0.5 %
Antenna Input
........................................................................ 75 ohms unbalanced
13
R-840/NS-BP300
is a trademark.
NS-BP300
■ Speaker Section
Type ................................. 2-way bass reflex speaker system
Driver “BD-LIVE” logo is a trademark of Blu-ray Disc Association.
Woofer .................................................13 cm (5-1/8") cone type
Tweeter ............................................ 2.5 cm (1") soft dome type
Frequency Response ...........................55 Hz to 28 kHz (-10dB) “BONUSVIEW” is a trademark of Blu-ray Disc Association.
R-840/NS-BP300
55 Hz to 80 kHz (-30dB)
is a trademark of DVD Format/Logo Licensing Corporation.
Impedance ...................................................................6 ohms
Nominal Input ................................................................ 60 W
Maximum Input ............................................................ 110 W “HDMI”, the “HDMI” logo, and “High-Definition Multimedia Interface” are
Sensitivity ..................................................... 85 dB/2.83 V/m trademarks or registered trademarks of HDMI Licensing LLC.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS
Crossover Frequency ................................................... 3 kHz and Thomson multimedia.
Input Terminal ......................................... Screw/Banana type Windows Media is either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
Dimensions (W x H x D)
.............................. 176 x 318 x 305 mm (6-7/8" x 12-1/2" x 12")
Weight ................................................................. 4.3 kg (9.5 lbs.)
“x.v.Color” and “x.v.Color” logo are trademarks.
Finish
Black piano color (PN) ..................C, T, K, A, B, G, L, V models
White piano color (WH) .................C, T, K, A, B, G, L, V models
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation
Accessories and Sony Corporation.
Speaker cable (2.0 m) ..................................................................x 2
* Specifications are subject to change without notice due to

product improvements.
C .................Canadian model B ......................British model

T .................... Chinese model G .................European model Java and all Java-based trademarks and logos are trademarks or
K ..................... Korean model L .................Singapore model registered trademarks of Sun Microsystems, Inc. in the United States and/
A ................Australian model V ..................... Taiwan model or other countries.
This product is licensed under the AVC patent portfolio license and
VC-1 patent portfolio license for the personal and noncommercial
“iPod” is a trademark of Apple Inc., registered in the U.S. and other use of a consumer to (i) encode video in compliance with the AVC
countries. Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode
“Made for iPod” means that an electronic accessory has been designed AVC/VC-1 Video that was encoded by a consumer engaged in a
to connect specifically to iPod and has been certified by the developer to personal and non-commercial activity and/or was obtained from a
meet Apple performance standards. video provider licensed to provide AVC/VC-1 Video. No license is
Apple is not responsible for the operation of this device or its compliance granted or shall be implied for any other use. Additional information
with safety and regulatory standards. may be obtained from MPEG LA, LLC.
Audio-visual material may consist of copyrighted works which must not
be recorded without the authority of the owner of the copyright. Refer to MPEG Layer-3 audio decoding technology licensed from Fraunhofer
relevant laws in your country. IIS and Thomson Multimedia.
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories. “Dolby” and the

double-D symbol are trademarks of Dolby Laboratories. DivX, DivX Ultra Certified, and associated logos are trademarks of DivX,
Inc. and are used under license.
DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and
DTS-HD Master Audio | Essential are trademarks of DTS, Inc. ©1996-2008 DTS and DTS 2.0 + Digital Out are registered trademarks and the DTS
DTS, Inc. All Rights Reserved. logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All
Rights Reserved.
14
R-840/NS-BP300
• DIMENSIONS
R-840
(15/16")
Top view
23
R-840/NS-BP300
309 (12-3/16")
277 (10-7/8")
348 (13-3/4")
16
(5/8")
Front view
110 (4-3/8")
8 102 (4")
(3/8")
177 (7")
215 (8-1/2")
Unit: mm (inch)
NS-BP300
305 (12")
Front view Side view
21 280 (11") 4
(7/8") (1/8")
310 (12-3/16")
318 (12-1/2")
20 20 25 25
8
(5/16")
(3/4") 176 (3/4") (1") (1")
(6-7/8") Unit: mm (inch)

15
R-840/NS-BP300
■ INTERNAL VIEW R-840
Top view Top view
1 2 3 4 5 6
R-840/NS-BP300
12 11 10 9 8 7
Front view 13
1 MAIN (8) P.C.B.
2 MAIN (2) P.C.B.
3 DAB P.C.B. (A, B models)
4 DAB MODULE (A, B models)
5 FM TUNER
6 FUNCTION (1) P.C.B.
7 MAIN (5) P.C.B.
8 MAIN (1) P.C.B.
9 POWER TRANSFORMER
10 MAIN (7) P.C.B.
14
11 MAIN (4) P.C.B.
12 FUNCTION (2) P.C.B.
13 MAIN (3) P.C.B.
14 MAIN (6) P.C.B.
16
R-840/NS-BP300
■ DISASSEMBLY PROCEDURES
(Remove parts in disassembly order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover Unit 2. Removal of Front Panel Unit

a. Remove 4 screws (①) and 4 screws (②). (Fig. 1) a. Remove 2 screws (③) and 2 screws (④). (Fig. 1)
b. Lift the top cover unit. (Fig. 1) b. Remove 2 screws (⑤) and remove W804-805. (Fig. 1)
c. Remove CB108 and CB301. (Fig. 1) c. Remove CB53, CB101 and CB109. (Fig. 1)
R-840/NS-BP300
d. Remove the top cover unit. (Fig. 1) d. Release 2 hooks and remove the front panel unit.
(Fig. 1)
1 2
2
Top cover unit
Front panel unit

5 CB301
CB108
5
3
Hook
1
W804
FUNCTION (1) P.C.B.
CB101
W805 CB109
Hook
CB53
4
3 MAIN (5) P.C.B.
Fig. 1
17
R-840/NS-BP300
3. Removal of Amp Unit

a. Remove 2 screws (⑥), 2 screws (⑦), 3 screws (⑧), 3 screws (⑨) and screw (⑩). (Fig. 2)
b. Remove CB103, CB403 and CB505. (Fig. 2)
c. Remove the amp unit together with the MAIN (1) P.C.B., the FUNCTION (1) P.C.B. and the rear panel. (Fig. 2)
8
R-840/NS-BP300
7 MAIN (2) P.C.B.
Amp unit
Rear panel
CB403
8 9 FUNCTION (1) P.C.B.
MAIN (1) P.C.B.

CB103
CB505
10
Fig. 2
18
R-840/NS-BP300
When checking the P.C.B.s:

• Spread the rubber sheet and the cloth. Then place the amp unit on the cloth and check it. (Fig. 3)
• Connect the ground point of the rear panel to the chassis with a ground lead or the like. (Fig. 3)
• Reconnect all cables (connectors) that have been disconnected.
• When connecting the flexible flat cable, be careful with polarity.
R-840/NS-BP300
Ground lead
Rear panel
Top cover unit
Amp unit
Chassis
Rubber sheet and the cloth
Front panel unit

Rubber sheet and the cloth
Fig. 3
19
R-840/NS-BP300
■ UPDATING FIRMWARE
When the following parts are replaced, the firmware must be updated to the latest version.
MAIN P.C.B.
Microprocessor (IC101) of FUNCTION P.C.B.
● Required tools ● Preparation and precautions

R-840/NS-BP300
• Firmware downloader program • Download the firmware downloader program and

....................................................... FlashSta.exe the latest firmware from the specified source to
• Firmware the same folder of the PC.
..................................................... R840_xxx.mot • Prepare the above specified RS232C cross cable.
R840_xxx.id • While writing the firmware, keep the other application
• RS232C cross cable “D-sub 9 pin female” software on the PC closed.
(Specifications) It is also recommended to keep the software on
the task tray closed as well.
Pin No.2 RxD Pin No.2 RxD
Pin No.3 TxD Pin No.3 TxD
Pin No.5 GND Pin No.5 GND
Pin No.7 RTS Pin No.7 RTS
Pin No.8 CTS Pin No.8 CTS
• RS232C conversion adaptor (Part No.: AAX77610)
Note: Do not use the RS232C conversion adaptor

(Part No.: WR492800), which is used
for updating BD-940/DVD-840/CD-640,
otherwise the update will not proceed.
● Confirmation of firmware version

Before and after updating the firmware, check the firmware version and checksum by using the self-diagnostic
function menu.
Start up the self-diagnostic function.
Using the “1-1. Firmware version” / “1-2. Checksum” menu, have the firmware version and checksum displayed, and
note down them. (See “SELF-DIAGNOSTIC FUNCTION”)
1-1. Firmware version

The firmware version of microprocessor (IC101 of the MAIN P.C.B.) is displayed.
1.VER:100/G
1-2. Checksum
The checksum value of microprocessor (IC101 of the MAIN P.C.B.) is displayed.
1.SUM:D87E
20
R-840/NS-BP300
● Connection
* Disconnect the power cable of this unit from the AC outlet.
1. Set the switch (SW301) of RS232C conversion adaptor to the “FLASH UCOM” position. (Fig. 1)
2. Connect the writing port (CB104 of FUNCTION P.C.B.) located on the rear panel of this unit to the serial port (RS232C)
of the PC with RS232C cross cable, RS232C conversion adaptor and flexible flat cable as shown below. (Fig. 3)
Note: Do not use the RS232C conversion adaptor (Part No.: WR492800), which is used for updating BD-940/
R-840/NS-BP300
DVD-840/CD-640, otherwise the update will not proceed.
This unit
PC
Serial port (RS232C) Writing port

(FUNCTION P.C.B. CB104)
RS232C conversion adaptor
RS232C cross cable

SW301
FLASH Flexible flat cable (9P)
UCOM OTHER
Fig. 1
21
R-840/NS-BP300
● Operation procedure
1. Connect the power cable of this unit to the AC outlet.
The power to this unit is supplied and the microprocessor is in the writing mode.
2. Start up FlashSta.exe.
The screen appears as shown below. (Fig. 2)
3. Select the data to be transmitted and port. (Fig. 2)
• Select Program
R-840/NS-BP300
Select Internal flash memory

• RS232C
Select the port of RS-232C
* For selection of the port, COM1 to 4 can be used.
As COM5 or higher port cannot be used, select from COM 1 to 4 of the setting on the PC side.
Select Internal flash memory
Select the port of RS-232C
Fig. 2
4. Click [Refer...] and select the firmware name. (Fig. 3)
* The ID and MCU Type are loaded automatically when the file is selected. (Fig. 3)
Click [OK]. (Fig. 3)
When [Refer...] is clicked, the “Open” screen appears.
Fig. 3
22
R-840/NS-BP300
5. Click [Setting], and set the baud rate. (Fig. 4)
R-840/NS-BP300
Select 115200 bps for the baud rate and 40 ms for
the program intervals.
* Reduce the baud rate if a transmission error
occurs frequently.
Fig. 4
6. Click [E.P.R.], then the “Erase” screen appears. (Fig. 5)
7. Click [OK] to start writing. (Fig. 5)
Writing being executed.
Fig. 5
23
R-840/NS-BP300
8. When writing of the firmware is completed, the screen appears as shown below. (Fig. 6)
Click [OK]. (Fig. 6)
9. Click [Exit] to end FlashSta.exe. (Fig. 6)

R-840/NS-BP300
Fig. 6
10. Disconnect the power cable of this unit from the AC outlet.
11. Remove the RS232C conversion adaptor and flexible flat cable from the writing port (CB104 of FUNCTION P.C.B.)
of this unit.
12. Start up the self-diagnostic function.
Using the “1-1. Firmware version” / “1-2. Checksum” menu, have the firmware version and checksum displayed,
and note down them. (See “SELF-DIAGNOSTIC FUNCTION”)
* When the firmware version and checksum are different from written ones, perform the “UPDATING FIRMWARE”
again from the beginning.
13. Disconnect the power cable of this unit from the AC outlet.
24
R-840/NS-BP300
■ SELF-DIAGNOSTIC FUNCTION
There are 10 main menu items, each of which has sub-menu items.
Listed in the table below are main menu items and sub-menu items.
MAIN MENU SUB-MENU

1 VER/DEST/SUM 1 FIRMWARE VERSION / DESTINATION
2 CHECKSUM
3 DAB MODULE VERSION (A, B models)
R-840/NS-BP300
2 DISPLAY CHECK 1 MENU DISPLAY
2 VFD DISPLAY OFF
3 VFD DISPLAY ALL
4 VFD DIMMER 1 (100 %) / 2 (50 %) / 3 (25 %)
3 FACTORY PRESET 0 PRESET INH / RSRV
4 AD DATA CHECK 1 PS1 PROTECTION
2 PS2 PROTECTION
3 DC PROTECTION
4 THM PROTECTION
5 VOL (VOLUME)
6 BAS (TONE CONTROL: BASS)
7 TBL (TONE CONTROL: TREBLE)
8 BAL (BALANCE L/R)
9 CNT (CENTER)
A KEY
B DST (DESTINATION)
5 PROTECTION HISTORY 0 DISPLAY / RESET
1 HISTORY 1
2 HISTORY 2
3 HISTORY 3
4 HISTORY 4
6 EEPROM CHECK 1 EEPROM CHECK
7 iPod CHECK 1 iPod CONNECTOR CHECK
2 iPod ACCESSORY POWER (DET_IPAP)
3 iPod DETECTION (N_DET_IP)
4 iPod PLAY/PAUSE KEY CHECK
8 AUDIO CHECK 1 AUDIO MUTE ON
2 SP RELAY OFF
3 HP MUTE ON
4 BASS MAX (100Hz +10dB)
5 BASS MIN (100Hz -10dB)
6 TRE MAX (10kHz +10dB)
7 TRE MIN (10kHz -10dB)
9 POWER OFF FACTOR HISTORY 1 LAST
2 HISTORY 1
3 HISTORY 2
4 HISTORY 3
5 HISTORY 4
A SYSTEM CONNECTOR CHECK 1 SYSTEM CONNECTOR LOOP BACK CHECK
2 SYSTEM CONNECTOR POWER LOW / HIGH (for CD-640)
25
R-840/NS-BP300
● Starting Self-Diagnostic Function

Turn the “BALANCE” knob counterclockwise fully and then while pressing the “PURE DIRECT” key of this unit as shown in
the figure below, press the “ ” (On/Standby) key to turn on the power.
The self-diagnostic function mode is activated.
Keys of this unit

R-840/NS-BP300
“ ” (On/Standby) key “PURE DIRECT” key
“BALANCE” knob
Display
NO PRT 1.VER:xxx/G
Destination
Firmware version
● Starting Self-diagnostic function in the protection cancel mode

If the protection function works and causes hindrance to trouble shoot, cancel the protection function as described below, and it
will be possible to enter the self-diagnostic function mode.
(The protection functions other than the PRI function will be disabled.)
Turn the “BALANCE” knob counterclockwise fully and then while pressing the “PURE DIRECT” key of this unit as shown in the
figure above, press the “ ” (On/Standby) key to turn on the power and keep pressing the “PURE DIRECT” key for 4 seconds or
longer.
The self-diagnostic function mode is activated with the protection functions disabled.
In this mode, the “SLEEP” segment of the FL display of this unit flashes to indicate that the mode is self-diagnostic function mode
with the protection functions disabled.
CAUTION!
Using this product with the protection function disabled may cause further damage to itself. Use special care when using
this mode.
● Canceling Self-diagnostic function

① Before canceling self-diagnostic function, execute setting for FACTORY PRESET of main menu No. 3 (Memory
initialization inhibited or Memory initialized).
* In order to keep the user memory preserved, be sure to select PRESET INH (Memory initialization inhibited).
② Press the “ ” (On/Standby) key of this unit to turn off the power.
26
R-840/NS-BP300
● Display provided when Self-Diagnostic Function started

The FL display of this unit displays the history of protection function data then the main menu (sub-menu FIRMWARE
VERSION/DESTINATION of main menu No. 1 VER/DEST/SUM) a few seconds later.
When there is no history of protection function:
Opening message After a few seconds Main menu display
R-840/NS-BP300
1.VER:xxx/G 1.VER:xxx/G
When there is a history of protection function:

When there is a history of protection function due to abnormal voltage in the power supply section.
PS1 xxx
A/D conversion value of voltage
For details of protection functions, refer to the main menu No. 4-1 PS1 / 4-2 PS2.
When there is a history of protection function due to abnormal DC output from the amplifier.
DC xxx
For details of protection functions, refer to the main menu No. 4-3 DC.
When there is a history of protection function due to abnormal temperature.
THM xxx
For details of protection functions, refer to the main menu No. 4-4 THM.
● History of protection function

When the protection function has worked, its history is stored in memory with a backup. Even if no abnormality is
noted while servicing the unit, an abnormality which has occurred previously can be defined as long as the backup
data has been stored.
The history of the protection function will be initialized when self-diagnostic function is cancelled by selecting No. 3
PRESET RSRV (Memory initialized) / No. 5 PROTECTION HISTORY (History reset) or when the backup data is erased.
27
R-840/NS-BP300
● Operation procedure of Main menu and Sub-menu

There are 10 main menu items, each of them having sub-menu items.
Main menu and Sub-menu selection

Both main menu and sub-menu can be selected by using the “INPUT” knob.
Parameter selection
The parameter can be selected by using the “PRESET ” (Up) key.
R-840/NS-BP300
Knob of this unit
Menu select Parameter select
Reverse Forward
"PRESET " (Up) key
● Functions in Self-Diagnostic Function mode

In addition to the self-diagnostic function menu items, functions as listed below are available.
• Power on/off
• Master volume
* Functions related to the tuner and the set menu are not available.
28
R-840/NS-BP300
● Details of Self-Diagnostic Function menu

1. VER/DEST/SUM
This menu is used to display the firmware version, checksum and destination.
The checksum is obtained by adding the data at every 8-bit for each program area and expressing the result as a 4-figure
hexadecimal data.
* Numeric values in the figure example are for reference.
R-840/NS-BP300
1.VER:100/G 1-1. FIRMWARE VERSION/DESTINATION
The firmware version of microprocessor (IC101 of FUNCTION P.C.B.) and destination are displayed.
1.SUM:D87E 1-2. CHECKSUM

The checksum value of microprocessor (IC101 of FUNCTION P.C.B.) is displayed.
1.DV:xxxxxxx 1-3. DAB MODULE VERSION (A, B models)

The Firmware version of DAB module is displayed.
29
R-840/NS-BP300
2. FL DISPLAY CHECK
This menu is used to check the FL display section/indicators for displaying/indicating.
Using the sub-menu, the display condition changes as shown below.
2-1. Initial display

“ ” (On/Standby) indicator: On (Green)
2 1 . D I S P C H K
PURE DIRECT indicator: Off
R-840/NS-BP300
2-2. All segments Off

“ ” (On/Standby) indicator: Off
PURE DIRECT indicator: Off
2-3. All segments On

“ ” (On/Standby) indicator: On (Orange)
PURE DIRECT indicator: On
2-4. DIMMER 100 % / 50 % / 25 %

Select this menu and press the “PRESET ” (Up) key to change display.
2 4 . D I M M E R 1
DIMMER 100 %
TP indicator: On (B, G models)
TIMER indicator: Off
2 4 . D I M M E R 1
DIMMER 50 %
TP indicator: Off (B, G models)
TIMER indicator: On
2 4 . D I M M E R 2
DIMMER 25 %
TP indicator: Off (B, G models)
TIMER indicator: Off
2 4 . D I M M E R 3
" " (On/Standby) indicator TP indicator (B, G models) "PURE DIRECT" indicator
TIMER indicator "PRESET " (Up) key
30
R-840/NS-BP300
3. FACTORY PRESET
This menu is used to reserve/inhibit initialization of the back-up IC.
30. PRT INH PRESET INHIBIT (Initialization inhibited)

Back-up IC initialization is not executed.
Select this sub-menu to protect the values set by the user.
R-840/NS-BP300
30. PRT RSRV PRESET RESERVED (Initialization reserved)
Initialization of the back-up IC is reserved. (Actually, initialization is executed the next time the power is
turned on.)
Select this sub-menu to reset to the original factory settings or to reset the back-up IC.
Any protection history will be initialized.
4. AD DATA CHECK
This menu is used to display the A/D conversion value of the microprocessor which detects panel keys of this unit and
protection functions by using the sub-menu. (Reference voltage: 5.0 V = 1023)
4-1. PS1
Power supply voltage protection 1 detection
Voltage detects: ±B, +VP and +9T.
Normal value: 366 to 687
(Reference voltage: 5.0 V = 1023)
41.PS1:0519
* If PS1 becomes out of the normal value range, the protection function works to turn off the power.
4-2. PS2
Power supply voltage protection 2 detection
Voltage detects: +9T, ±7V and +3.3DAB (A, B models).
42.PS2:0519
* If PS2 becomes out of the normal value range, the protection function works to turn off the power.
4-3. DC
Power amplifier DC (DC voltage) output detection
43.DC :0036
* If DC becomes out of the normal value range, the protection function works to turn off the power.
31
R-840/NS-BP300
4-4. THM
Temperature detection
Temperature of the heatsink is detected by IC501 of the MAIN P.C.B..
R-840/NS-BP300
44.THM: 0186
* If THM becomes out of the normal value range, the protection function works to turn off the power.
4-5. VOLUME
VOLUME knob position detection
The voltage at 97 pin (I-VOL) of microprocessor IC101 is displayed.
Normal value: 0 (MIN) to 1010 or more (MAX)
45.VOL:0000
4-6. BASS
BASS knob position detection
The voltage at 94 pin (I-BAS) of microprocessor IC101 is displayed.
Normal value: 0 (-) to 1010 or more (+)
46.BAS:0502
4-7. TBL
TREBLE knob position detection
The voltage at 95 pin (I-TRE) of microprocessor IC101 is displayed.
Normal value: 0 (-) to 1010 or more (+)
47.TBL:0502
4-8. BAL
BALANCE knob position detection
The voltage at 93 pin (I-LRBAL) of microprocessor IC101 is displayed.
Normal value: 0 (L) to 1010 or more (R)
48.BAL:0502
4-9. CNT
Center position detection of BASS, TREBLE and BALANCE knobs
49.CNT:0502
32
R-840/NS-BP300
4-A. KEY
Panel keys detection
The voltage at 74 pin (I-KEY0) of microprocessor IC101 is displayed.
4A.KEY:1023
R-840/NS-BP300
Key detection for A/D port
Key input (A/D) pull-up resistance 10 k-ohms
Ohm 0 +1.2 k +91 k

V 0 – 0.2 0.3 – 0.8 4.0 – 5.0
A/D value (5V=1023) 0 – 40 60 – 165 820 – 1023
I-KEY0 (91 pin) PRESET UP PRESET DOWN PURE DIRECT
4-B. DST
Destination detection
The voltage at 81 pin (DEST) of microprocessor IC101 is displayed.
4B.DST:0855
Destination detection for A/D port

Destination input (A/D) pull-up resistance 10 k-ohms
Ohm 1.2 k 4.7 k 6.8 k 15.0 k 24.0 k 47.0 k 100.0 k

V 0.2 – 1.0 1.1 – 1.8 1.9 – 2.5 2.6 – 3.2 3.3 – 3.8 3.9 – 4.3 4.4 – 4.8
A/D value (5V=1023) 40 – 205 225 – 370 390 – 510 530 – 655 675 – 780 800 – 880 900 – 985
DEST (81 pin) C V T, K A B G L
33
R-840/NS-BP300
5. PROTECTION HISTORY
This menu is used to display the history of protection function.
5-0. DSP / RST

50.HIST DSP DSP: Displayed.

R-840/NS-BP300
50.HIST RST RST: Initialization of the history of protection function is reserved.

(Actually, initialization is executed the next time the power is turned on.)
5-1. History 1 to 4
Example
51. PS1: xxx 5-1 History 1
Example
52. PS2: xxx 5-2 History 2
Example
53. THM: xxx 5-3 History 3
Example
54. THM: xxx 5-4 History 4
For details of the protection function, see “4. AD DATA CHECK”.
34
R-840/NS-BP300
6. EEPROM CHECK
This menu is used to check the communicating condition between the microprocessor (IC101) and the EEPROM (IC102)
on the FUNCTION P.C.B..
61.EPRM: OK
OK : No error detected
NG : An error detected
R-840/NS-BP300
7. iPod
This menu is used to check the connecting condition of the iPod terminal.
Before starting check, connect the iPod to the iPod terminal of this unit.
71.IP CN:NG 7-1. The iPod terminal loop-back check

Not applied to this model.
72.IP PW:Lo 7-2. The iPod Accessory Power (DET_IPAP) is detected

Not applied to this model.
73.IP DT:HI 7-3. The iPod installation (N_DET_IP) is detected

HI: Undetect iPod
LO: Detect iPod
74.IP kY: 7-4. The “iPod ” (iPod Play/Pause) key detection

ON: “iPod ” (iPod Play/Pause) key of this unit is pressed
---: NO detection key
8. AUDIO CHECK
This menu is used to check the MUTE status and volume level setting.
Audio mute ON Speaker relay OFF Phones mute ON
81.AMUTE ON 82.SPRY OFF 83.HPMUT ON
Tone control BASS maximum Tone control BASS minimum Tone control TREBLE maximum Tone control TREBLE minimum
(100Hz, +10dB) (100Hz, -10dB) (10kHz, +10dB) (10kHz, -10dB)
84.BASS MAX 85.BAS MIN 86.TRE MAX 87.TRE MIN
35
R-840/NS-BP300
9. POWER OFF FACTOR HISTORY

This menu is used to display the history of power off factor.
Example
91. NO HIST 9-1 History 1

R-840/NS-BP300
Example
Example
Example
Example
Power off factor display are as follows.
9x. PWR DN Power down
9x. PRT Protection
9x. SLEEP SLEEP timer
9x. PANEL SW “ ” (On/Standby) key of this unit
9x. RC KEY “ ” (On/Standby) key of the remote control
9x. SYS LINK System link to player
9x. AT STBY Auto standby
9x. TIMER Timer play ends
9x. NO HIST No history
36
R-840/NS-BP300
A. SYSTEM CONNECTOR
This menu is used to check the SYSTEM connector without connecting the BD/DVD/CD player to this unit.
With the power to this unit turned off, short between pins No. 1 (SYS_MOSI) and No. 4 (SYS_MISO), between pins No.
2 (SYS_PL_EN) and No. 3 (SYS_RE_EN).
SYSTEM CONNECTOR
R-840/NS-BP300
4 3
2 1
Note) Be sure to return the shorted pins to their original condition after executing this check.
Start up the self-diagnostic function and select this menu.
A-1. SYSTEM CONNECTOR Loop back check

System control line loop back check is executed.
SYS LB NG System control line loop back check

OK : No error detected
NG : An error is detected
A-2. SYS POW (System connector power supply detection)

The output status at 5 pin (PLAYER_S10) of the SYSTEM connector is displayed.
SYS POW LOW Power supply control line loop back check
LOW : Player undetected
HIGH : Player detected
37
R-840/NS-BP300
■ CONFIRMATION OF IDLING CURRENT OF AMP UNIT

1) No signal applied.
2) Non-loaded condition.
3) Aging is not necessary.
Item Test Point Rating (DC) Note

MAIN L: R578 CB504 1 – 2 pin If the measured voltage exceeds 2.6 mV, cut the lead wire of R562 (L ch) or
0.05mV – 2.5mV
MAIN R: R579 CB504 3 – 4 pin R563 (R ch) and then check again if each measured value satisfies the rating.
R-840/NS-BP300
* Confirm that the idling current is 0.2 mV – 15 mV after 60 minutes. 0.05 mV to 2.5 mV (DC)
R562 (L ch)
R563 (R ch)
Cut OFF
R578 (L ch)
R579 (R ch)
SCHEMATIC DIAGRAM
Q513 R578 (L ch) MAIN (1)
R562 (cut off)

Test point
MAIN L:
0.05 mV to 2.5 mV (DC)
CB504
MAIN R:
0.05 mV to 2.5 mV (DC)
R563 (cut off) R579 (R ch)
Q514
38
R-840/NS-BP300
MAIN (1) P.C.B.
Test point
MAIN R:
0.05 mV to 2.5 mV (DC)
R-840/NS-BP300
Front side
CB504
MAIN L: R578 (L ch)

0.05 mV to 2.5 mV (DC) Q513
R562 (cut off)
R579 (R ch)
Q514
R563 (cut off)
Rear side
Notes)
• If the measured voltage exceeds 2.6 mV after an amplifier repair, first check for a defective component before cutting
the bias resistor.
• If R562 (L ch) or R563 (R ch) have already been cut off and idling current does not flow, reconnect R562 (1 k-ohms) or
R563 (1 k-ohms).
• Q513 and Q514 are transistors for temperature correction. Apply silicone grease to the contact surface with the
heatsink.
39
R-840/NS-BP300
■ DISPLAY DATA
● V801 : 12-ST-73GINK (MAIN P.C.B.)
1 39
R-840/NS-BP300
● PIN CONNECTION
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Connection F1 NP NP NX NX NX NX NX NX NX NX NX NX NX NX NX NX NX NX NX
Pin No. 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
Connection NX NX NX NX NX TSB TSA DA CP CS RESET OSC VDD VH PGND LGND NP NP F2
Note: 1) F1, F2 ..... Filament 2) NP ..... No pin 3) NX ..... No extended pin 4) DL ..... Datum line 5) LGND ..... Logic GND pin
6) PGND ..... Power GND pin 7) VH ..... High voltage supply pin 8) VDD ..... Logic voltage supply pin 9) CP ..... Shift register clock
10) DA ..... Serial data input 11) CS ..... Chip select input pin 12) TSA, B ..... Test pin 13) OSC ..... Pin for self-oscillation
14) RESET ..... Reset input
● GRID ASSIGNMENT
12G
1G 2G 3G 4G 5G 6G 7G 8G 9G 10G 11G
1-1 2-1 3-1 4-1 5-1 ● ANODE CONNECTION
1-2 2-2 3-2 4-2 5-2 1G to 11G 12G 1G to 11G 12G 1G to 11G 12G
D0 1-1 D15 1-4 – D30 1-7 –
1-3 2-3 3-3 4-3 5-3 D1 2-1 D16 2-4 – D31 2-7 –
D2 3-1 D17 3-4 – D32 3-7 –
1-4 2-4 3-4 4-4 5-4
D3 4-1 D18 4-4 – D33 4-7 –
1-5 2-5 3-5 4-5 5-5 D4 5-1 D19 5-4 – D34 5-7 –
D5 1-2 D20 1-5 –
1-6 2-6 3-6 4-6 5-6
D6 2-2 D21 2-5 –
D7 3-2 D22 3-5 –
1-7 2-7 3-7 4-7 5-7
D8 4-2 D23 4-5 –
D9 5-2 D24 5-5 –
1G to 11G
D10 1-3 – D25 1-6 –
D11 2-3 – D26 2-6 –
D12 3-3 – D27 3-6 –
D13 4-3 – D28 4-6 –
D14 5-3 – D29 5-6 –
40
R-840/NS-BP300
■ IC DATA
IC101: R5F3640DNFA (FUNCTION P.C.B.)
Single-chip 16-bit CMOS microprocessor
8 8 8 8 8 8
Port P0 Port P1 Port P2 Port P3 Port P4 Port P5
VCC2 ports
R-840/NS-BP300
Internal peripheral functions
UART or clock synchronous Clock generation circuit
serial I/O X IN-XOUT
Timer (16-bit)
(6-channels) XCIN-XCOUT
Outputs (timer A): 5 PLL frequency synthesizer
Clock synchronous On-chip oscillator (125 kHz)
Inputs (timer B): 6 serial I/O
(8 bits x 2 channels) DMAC
Three-phase motor control circuit (4 channels)
CRC arithmetic circuit (CCITT)

Watchdog timer (Polynomial : X 16 +X12 +X5+1)
(15-bits)
M16C/60 series Memory
A/D converter Microprocessor core
(10-bits X 26-channels) ROM
SB
D/A converter R0H R0L
R1H R1L USP RAM
(8-bits X 2-channels) R2 ISP
R3
INTB
A0 PC
A1
A1
FB FLG Multiplier
FB
VCC1 ports
Port P10 Port P9 Port P8 Port P7 Port P6

8 8 8 8 8
IPD_ACC_EN
EEP_IP_SDA
EEP_IP_SCL
RDS_N_RST
IPD_APDET
HP_N_DET
IPD_MOSI
IPD_MISO
IP_N_RST
RDS_RDY
RDS_SCK
PWR_SW
IPD_PON
FL_N_CS
IPD_DET
FL_N_IC
FL_SCK
FL_SDT
XCOUT
CNVSS
N_RST
XOUT
VCC1
BYTE
XCIN
REM
/NMI
N.C.
VSS
XIN
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
WR_MOSI 31 100 RDS_SDT

WR_MISO 32 99 Avcc
WR_CLK 33 Open drain port 98 VRef
WR_BUSY 34 97 I_VOL
DAB_SDA 35 96 MG
DAB_SCL 36 95 I_TRE
DAB_N_RST 37 94 I_BAS
— Microprocessor M16C/64 —
N.C. 38 93 I_LRBAL
N.C. 39 92 I_CNTR
R5F3640DNFA
N.C. 40 91 I_KEY0
N_EMP 41 90 LED_TIMER
IC101
5SPC 42 89 LED_PD
N.C. 43 88 LED_PWR
N.C. 44 87 LED_STBY
N.C. 45 86 LED_EON
N_CE 46 85 N.C.
TU_SDA 47 84 MVOL-
TU_SCL 48 83 MVOL+
TU_N_TUNED 49 82 MODEL
TU_N_ST 50 81 DEST
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
EV_N_CE
EV_SCK
EV_SDT
SEL_SCK
SEL_SDA
N.C.
N.C.
N.C.
N.C.
HP_N_MT
M_N_MT
VCC2
SPKR_RY
VSS
IPD_AUDET
PWR_RY
PWR_DET
PRI
PRV2
PRV1
PRTH
PRD
IPD_SW
I_KEY0
SYS_PL_EN
SYS_RE_EN
SYS_MOSI
SYS_MISO
ISA
ISB
41
R-840/NS-BP300
I/O
MCUSleep
[Standby]
PowerOn
Standby
Pin Function Name
Writing
Port Name Detail of Function
No. (P.C.B.)
1 P9_6/ANEX1/SOUT4 RDS_N_RST O O O RDS reset control

2 P9_5/ANEX0/CLK4 RDS_SCK SO O O Serial clock for RDS communication
3 P9_4/DA1/TB4IN RDS_RDY I O O RDS READY input terminal
4 P9_3/DA0/TB3IN FL_N_IC O O O FL initial clear control
5 P9_2/TB2IN/SOUT3 FL_SDT SO O O FL serial communication data
R-840/NS-BP300
6 P9_1/TB1IN/SIN3 FL_N_CS O O O FL communication chip select

7 P9_0/TB0IN/CLK3 FL_SCK SO O O FL communication serial clock
Connect to Vss when using the single chip mode (for change of
8 BYTE BYTE MCU MCU MCU
external data bus width: 16bit)
Low: Processor mode select: Single chip mode
9 CNVss CNVss MCU MCU MCU
H: To flash included boot mode
10 P8_7/XCIN XCIN MCU MCU MCU Sub clock 32.768 kHz input
11 P8_6/XCOUT XCOUT MCU MCU MCU Sub clock 32.768 kHz output
12 RESET N_RST MCU MCU MCU Reset input
13 Xout XOUT MCU MCU MCU Main clock 20 MHz output
14 Vss VSS MCU MCU MCU
15 Xin XIN MCU MCU MCU Main clock 20 MHz input
16 Vcc1 VCC1 MCU MCU MCU
No use (Pull-up)
17 P8_5/NMI/SD /NMI MCU MCU MCU
* Nch Open Drain
18 P8_4/INT2/ZP PWR_SW IRQ IRQ O POWER SW detection
19 P8_3/INT1 REM IRQ IRQ O Remote control pulse input
20 P8_2/INT0 IPD_DET IRQ IRQ O iPod detection
Headphone detection
21 P8_1/TA4IN/U/CTS5/RTS5 HP_DET I O O
Hi: Insert HP
22 P8_0/TA4OUT/U//RXD5/SCL5 EEP_IP_SCL SO O O I2C bus clock for EEP ROM and iPod certification
iPod certification chip reset control
50kHz when in the I2C low speed mode
23 P7_7/TA3IN/CLK5 IP_N_RST O O O
As inputting the high speed causes a malfunction, be sure to set at
“Low” and keep the reset state except during communication
24 P7_6/TA3OUT/TXD5/SDA5 EEP_IP_SDA SIO O O I2C bus data for EEP ROM and iPod certification
25 P7_5/TA2IN/W NC O O O
Power supply regulator IC for iPod charge ON/OFF control
26 P7_4/TA2OUT/W IPD_PON O O O
Hi = ON, Low = OFF
Set at Low while in the Standby mode and when AC turned off
27 P7_3/CTS2/RTS2/TA1IN/V IPD_ACC_EN O O O
Kept at Hi in the usual state (communicable with iPod)
28 P7_2/CLK2/TA1OUT/V IPD_AP_DET I O O Accessory power detection
iPod UART communication
29 P7_1/RXD2/SCL2/TA0IN/TB5IN IPD_MISO SI O O
* Nch Open Drain
iPod UART communication
30 P7_0/TXD2/SDA2/TA0OUT IPD_MOSI SO O O
* Nch Open Drain
For simple emulation
31 P6_7/TXD1/SDA1 WR_MOSI SO SO O MCU
Rx during flash writing
32 P6_6/RXD1/SCL1 WR_MISO SI SI O MCU
Tx during flash writing
33 P6_5/CLK1 WR_CLK SO SO O MCU
Clock during flash writing
34 P6_4/CTS1/RTS1/CTS0/CLKS1 WR_BUSY O O O MCU
BUSY output during flash writing
Bus data of DAB I2C communication
35 P6_3/TXD0/SDA0 DAB_SDA SIO O O
I2C fs = 100 k/400 k
Bus clock of DAB I2C communication
36 P6_2/RXD0/SCL0 DAB_SCL SO O O
I2C fs = 100 k/400 k
37 P6_1/CLK0 DAB_N_RST O O O DAB reset control
38 P6_0/CTS0/RTS0 NC O O O
39 P5_7/RDY/CLKOUT NC O O O
40 P5_6/ALE NC O O O
(LO) for flash writing
41 P5_5/HOLD /EMP I
Pull down as the Hiz state may occur while the emulator is operating
42
R-840/NS-BP300
I/O
MCUSleep
[Standby]
PowerOn
Standby
Pin Function Name
Writing
No. (P.C.B.)
ON/OFF control of the +5SPC power supply

(L = ON / H = OFF: for reduction of standby power)
Fixed at Low usually
42 P5_4/HLDA 5SPC O O O [O] The standby power is reduced (MCUSleep) by setting at Hi after the
procedure required for the standby setting is completed
R-840/NS-BP300
When changing to the Standby mode, set at Hi after the ending
procedure is completed
43 P5_3/BCLK NC O O O
44 P5_2/RD NC O O O
45 P5_1/WRH/BHE NC O O O
46 P5_0/WRL/WR /CE I (HI) for flash writing
47 P4_7/TXD7/SDA7/CS3 TU_SDA SIO O O I2C bus data of TUNER communication
48 P4_6/RXD7/SCL7/CS2 TU_SDL O O O I2C bus clock of TUNER communication
49 P4_5/CLK7/CS1 TU_N_TUNED O O O TUNER TUNED input
50 P4_4/CTS7/RTS7/CS0 TU_N_ST O O O TUNER STEREO detection input
51 P4_3/A19 EV_N_CE O O O Chip enable of electronic VOLUME control
52 P4_2/A18 EV_SCK SO O O Serial clock of electronic VOLUME control
53 P4_1/A17 EV_SDT SO O O Serial data of electronic VOLUME control
Sound switch of DAB and TUNER
54 P4_0/A16 SEL_TU SO O O
L: DAB, H: TUNER (FM) (B model)
55 P3_7/A15 NC O O O
56 P3_6/A14 NC O O O
57 P3_5/A13 NC O O O
58 P3_4/A12 NC O O O
59 P3_3/A11 NC O O O
Head phone MUTE control
60 P3_2/A10 HP_N_MT O O O
Low = MUTE ON
MAIN MUTE control
61 P3_1/A9 M_N_MT O O O
Low = MUTE ON
62 Vcc2 VCC2 MCU MCU MCU
Speaker relay control
63 P3_0/A8 SPKER_RY O O O
Hi = Relay ON
64 Vss VSS MCU MCU MCU
65 P2_7/AN2_7/A7 IP_AUDET AD O O iPod Audio signal detection
66 P2_6/AN2_6/A6 PWR_RY O O O Power relay control
AC IN detection circuit
67 P2_5/INT7/AN2_5/A5 PWR_DET IRQ IRQ IRQ
Pull up to +5M by 100 k-ohms on the SUB TR circuit board
POWER AMP current protection is detected
* R-840 used as current protection as well
If specifications are the same, the current protection and DC
68 P2_4/INT6/AN2_4/A4 PRI IRQ O O
protection are monitored by AD
Low = normal, Hi = abnormal
The PRI logic 5V is made with +B and Zener
69 P2_3/AN2_3/A3 PRV2 AD O O Power supply protection detection 2
70 P2_2/AN2_2/A2 PRV1 AD O O Power supply protection detection 1
71 P2_1/AN2_1/A1 PRTH AD O O Temperature detection
POWER AMP DC protection is detected
72 P2_0/AN2_0/A0 PRD AD O O The PRI logic 5V is made with +B and Zener
The PD resistance is for fixing at Low in the normal state
73 P1_7/INT5/D15 IPD_SW IRQ IRQ O iPod Play/Pause SW detection
Connecting 91pin: AD5: I-KEY0
Usable for the direct play by TUNER PRESET Up/Down
74 P1_6/INT4/D14 I_KEY0 IRQ IRQ O
The key is discriminated by checking the AD5 value after an
interruption is detected
POWER DET detection of SYSTEM (PLAYER)
75 P1_5/INT3/D13 SYS_PL_EN IRQ IRQ O Effective distinction of player’s CPU
Hi = player CPU effective
RECEIVER CPU state signal
76 P1_4/D12 SYS_R_EN O O O
Hi = Receiver CPU effective
77 P1_3/TXD6/SDA6/D11 SYS_MOSI SO O O SYSTEM communication receiver CPU to player CPU
78 P1_2/RXD6/SCL6/D10 SYS_MISO SI O O SYSTEM communication player CPU to receiver CPU
79 P1_1/CLK6/D9 ISA I O O Encoder phase detection input for input selector
80 P1_0/CTS6/RTS6/D8 ISB I O O Encoder phase detection input for input selector
81 P0_7/AN0_7/D7 DEST AD AD O Destination distinction
43
R-840/NS-BP300
I/O
MCUSleep
[Standby]
PowerOn
Standby
Pin Function Name
Writing
No. (P.C.B.)
82 P0_6/AN0_6/D6 MODEL AD AD O Model distinction

83 P0_5/AN0_5/D5 MVOL+ O O O Direction control of upside of MOTOR VOLUME
84 P0_4/AN0_4/D4 MVOL- O O O Direction control of downside of MOTOR VOLUME
85 P0_3/AN0_3/D3 0 O O O
86 P0_2/AN0_2/D2 LED_EON O O O EON LED control
R-840/NS-BP300
STANDBY LED control

87 P0_1/AN0_1/D1 LED_STBY O O O
STANDBY = Hi (LED ON)
POWER ON LED control
88 P0_0/AN0_0/D0 LED_PWR O O O
POWER ON = Hi (LED ON)
PURE DIRECT LED control
89 P10_7/AN7/KI3 LED_PD O O O
PURE DIRECT = Hi (LED ON)
TIMER LED control
90 P10_6/AN6/KI2 LED_TIMER O O O
TIMER setting = Hi (LED ON)
91 P10_5/AN5/KI1 I_KEY0 AD O O KEY AD value input
Reference value of AD uptake of TREBLE, BASS, LRBALANCE
92 P10_4/AN4/KI0 I_CNTR AD O O
Knob center value
93 P10_3/AN3 I_LRBAL AD O O LRBALANCE knob position detection AD value input
94 P10_2/AN2 I_BAS AD O O BASS knob position detection AD value input
95 P10_1/AN1 I_TRE AD O O TREBLE knob position detection AD value input
96 Avss MG MCU MCU MCU
97 P10_0/AN0 I_VOL AD O O VOLUME position detection AD value input
98 Vref VREF MCU MCU MCU
99 Avcc AVCC MCU MCU MCU
100 P9_7/ADTRG/SIN4 RDS_SDT SI O O Serial data for RDS communication

Ohm 0 +1.2 k +91 k

V 0 – 0.2 0.3 – 0.8 4.0 – 5.0
A/D value (5V=1023) 0 – 40 60 – 165 820 – 1023
Destination detection for A/D port

Destination input (A/D) pull-up resistance 10 k-ohms
Ohm 1.2 k 4.7 k 6.8 k 15.0 k 24.0 k 47.0 k 100.0 k

V 0.2 – 1.0 1.1 – 1.8 1.9 – 2.5 2.6 – 3.2 3.3 – 3.8 3.9 – 4.3 4.4 – 4.8
A/D value (5V=1023) 40 – 205 225 – 370 390 – 510 530 – 655 675 – 780 800 – 880 900 – 985
DEST (81 pin) C V T, K A B G L
44
R-840/NS-BP300
■ PIN CONNECTION DIAGRAMS

• ICs
BA15218F KIA7809API-U/P LB1641 LC72725KM-UY-TLM-E LM61CIZ
10
R-840/NS-BP300
8 4 8
1 IN 16 +VS
OUT VOUT
COM 1 1 GND
LME49723MAX/NOPB MFI341S2164 M24C02-RDW6TP NJM2068MD-TE2 NJM2388F05

NJM2388F33
15 11
16 10
8 4
8 4 8
4 1 1. VIN
1 20 6
1 2. VOUT
1 5 1 3. GND
4. ON/OFF CONTROL
4
NJM2752RB0 NJM4580E NJW1194V PQ012GN01ZPH R1154H058B-T1-F
3
17 1
10 5 8 4 3
16 1: Vin 5
1 32 2: VB
1 1 4
2 3: Vout
4 5 4: NC
5: GND
1
R5F3640DNFA TC4013BP TC7SET08FU TC7SZ125FU TC7WH125FK
80 51
81 50
4 4
5 5 8
3 4
7 3
1
14 1 1
1
100 31
1 30
45
R-840/NS-BP300
• Diodes
1SR139 1SS133 1SS355 D5SBA60

1SR400 1SS176
Anode Anode Anode
Cathode –
R-840/NS-BP300
Cathode Cathode AC
+ AC
HZU10B2 KBP103G 1.0A 200V MTZJ5.1B RB501V-40

HZU2.7B2 TRF-E MTZJ5.1C
HZU3.0B1 TRF-E MTZJ8.2C
HZU3.9B2 TRF-E MTZJ12C
HZU4.7B2 TRF-E Anode MTZJ27C Anode
HZU5.1B2 TRF-E Anode
HZU5.6B TRF-E
HZU5.6B2 TRF-E –
Cathode AC
HZU6.8B2 TRF-E AC Cathode
+ Cathode
HZU9.1B2 TRF-E
RLS245 RSB6.8S 6.8V S1NB60 1.0A 600V S2VB60
Anode
Anode
1 3
AC
AC –
Cathode + 3
Cathode 2
4
1 2 4
46
R-840/NS-BP300
• Transistors
2SA1037K 2SA1145 2SA1694 O,P,Y 2SA1708 2SA1770S/T-AN 2SB1257

2SC4467 O,P,Y 2SC4488
R-840/NS-BP300
E
B B C
B C B
C E B
B E CE
CE
2SC1740S 2SC1815 Y 2SC2412K 2SC3326-A (TE85R, F) 2SC4614S/T-AN

2SC2229 2SC3326-B (TE85R, F)
C C
E E
B
B E B
CE CB
E
C
B
2SD2014 2SD2704 K 2SD2705S TP 2SK2158-T2B-A 2SK246-Y (F)
C
D
E
B S
E G
B C S
CE B GD
2SK3850 3LN01C-TB-E DTA114EKA HN4C06J KTA1517S

DTC144EKA KTC3911S
D
4
5
3
D 3 C
1 1. BASE 1 (B1)
S 1 1: GND 2. EMITTER (E) E
G 2: IN 3. BASE 2 (B2)
G D 2 3: OUT 4. COLLECTOR 2 (C2) B
S 5. COLLECTOR 1 (G2)
47
R-840/NS-BP300
MEMO
R-840/NS-BP300
48
A B C D E F G H I J
R-840/NS-BP300
1 ■ BLOCK DIAGRAM
(G model)
Q302
FUNCTION REG. J322,323 (C, T, K, A, L, V models)

IC301
r 4FFQBHF–65 → IC303
SCHEMATIC DIAGRAM
IC302
IC305
FM TUNER
4,7 3,30
1,10
2
+B
2,9
DAB
MODULE RY501
(A, B models) IC304
IC306
8,25 POWER
SPEAKERS
Q507,508 AMP.
1,32
PLAYER
AUDIO IC310 MAIN MUTE PRTH,PRI,PRD
2,31 -B
IN
+7
CB701 PJ302
IC309
IC307 SUBWOOFER OUTPUT
Q310
3 4,29 -7
+7
IC308 JK801
IC108 PHONES
Q306-609
-7
HP MUTE
JK101 POWER
iPod TRANSFORMER
SYSTEM AUTHENTICATION
CONNECTOR IC102 FL1,2
COPROCESSOR
IC103 D404
4 3.3DAB REGULATOR
IC104,105
IC402
Q107
MAIN IC51
DAB_GND (A, B models)
r 4FFQBHF–69 → MOTOR IC1 D9
SCHEMATIC DIAGRAM DRIVER
VR51
+5I REGULATOR
+5I
E
IC503
REGULATOR
5 SW801 VR853 VR851 VR852 VR51 Q401 D403

92-97
79,80
83,84
60,61
68-72
12
67
RELAY
REGULATOR
IC101 IC109
PRE
RY1
MICROPROCESSOR AMP. Q402
63 REGULATOR
SPKR_RY
74,91
73
90
86
89
87
88
10
11
13
15
19
D517
+B
D807
D804
D803
D803
D805
RY501
SPKR_RY SPEAKER
XL101 XL102 RELAY
SW804 SW803 SW805 POWER
E
AMP. Q532
LED_TP
U801
20 +VP REGULATOR
6 -B
Q3
+5M IC4
SW802 (B, G models) Q2 D14

CB104 IC3 Q5
Writing
Port
V801
D5
T1
S10 REGULATOR
S10
AC IN
49
A B C D E F G H I J
R-840/NS-BP300
1 ■ PRINTED CIRCUIT BOARDS POINT A XL301 (Pin 14 of IC301) POINT B XL101 (Pin 10 of IC101) POINT C XL102 (Pin 13 of IC101) POINT D 1 / CB103 (+5BU), 2 / CB103 (N_RST)
FUNCTION (1) P.C.B. (Side A)

CB103 1 CB103 1
(+5BU) (+5BU)
CB103 2 CB103 2
(N_RST) (N_RST)
2
POWER ON POWER OFF POWER ON
DAB (CB902)
MAIN (2) A, B models FM TUNER
FUNCTION (2)
DAB_WCK
D
DAB_MCK
DAB_BCK
DAB_SDA
DAB_SCL
Vdd_Select
(W401)
DAB_SD
(W702)
STEREO
DAB_R
TU_SDA
A, B models
DAB_L
TUNEO
TGND
MAIN (4) FUNCTION (2)
+9V
(W1) (W701)
IPD_ACC_EN
REM_SENSE
PLAYER_S10
DAB_N_RST
AUDIO_RET
SGND_DAB
TU_R_OUT
TU_L_OUT
PWR_DET
IPD_MISO
IPD_MOSI
DAB_GND
IPAP_DET
DET_OUT
S-METER
IPD_PON
IPD_DET
PWR_RY
+3.3DAB
IPD_SW
TU_SCL
N_RST
MAIN (3)
AGND
+3.3D
IGND
IGND
+5BU
IGND
GND
GND
GND
GND
2 1 A, B models A B, G models A, B models
S10
IPR
(CB801)
MG
MG
IPL
+5I
+5I
+5I
3
LED_TIMER CB103 CB108
LED_STBY
LED_PWR CB301
LED_EON CB106
ISA 5 1
JK101
ISB CB302 SYSTEM
IC109
REM CB303
16 1 TO:PLAYER
HP_N_DET CONNECTOR
+5CPU
CB101
4 3
IC301
+5M
MG
FL_SDT 4 5
FL_SCK 4 5
IC307
9 8
FL_N_CS
IC305
FL_N_IC 4 5
I_KEY0 1 8
IC304
CB105 8
LED_PD 1
PWR_SW
CB104
1 8
F2 Writing port
F1
FLGND
+VP
IC108 6
4 5 8
IC106 IC104
5
1 10
IC102 IC302
I_CNTR 4 1 4 5 4 5 4 5 4 5
I_LRBAL 1 4 31 50 3 1 3 1 3 1 3 1
IC105 IC107 1 4
I_BAS 30 51
I_TRE 8 5
L/R PLAYER
M_PS 8 IC306 5
CB109
20 1 56
MGND
16 15 11 10
PJ301
MVOL+ AUDIO
IC101
IC103
MVOL-
MG
IN
I_VOL
+5CPU L/R AUX
FG 1 80
100 81 W301
5 MAIN (5)
(W51) 5 8
IC308
PJ302
4 1 SUBWOOFER OUTPUT
CB305
No replacement part available. CB102 +9T
TGND
-7V
+7V
E
SEL_R
E
SEL_L
MGND
M_PS
SGND_DAB
AGND
F2
F1
FL_GND
+VP
PRV1
PRV2
PRD
PRI
M_MUTE
SPKR_RY
MG
+5CPU
PRTH
C B
HP_R
AGND
HP_L
MAIN (1)
(CB503)
MAIN (1)
(CB502)
6 MAIN (5) • Semiconductor Location
(CB53)
Ref no. Location Ref no. Location Ref no. Location Ref no. Location
(for factory) D105 C3 IC105 D4 IC307 H4 Q113 D4
D106 C3 IC106 D4 IC308 G5 Q114 C4
D111 B3 IC107 D4 Q101 E5 Q115 C5
D112 D5 IC108 C4 Q102 D5 Q116 C5
D301 H3 IC109 B3 Q104 C4 Q301 F3
D302 H3 IC301 F3 Q106 D4 Q306 G5
IC101 D5 IC302 G4 Q107 C4 Q309 G5
IC102 B4 IC304 E4 Q109 C4 Q310 H5
7 IC103 C4 IC305 G4 Q110 C4 Q312 F5
IC104 D4 IC306 H4 Q112 D4 Q313 F5
50
A B C D E F G H I J
R-840/NS-BP300
FUNCTION (1) P.C.B. (Side B)
A, B models A, B models B, G models A, B models C, T, K, G, L, V models
4
1 32
IC303
16 17
4 1
IC310
5 5 8
4 1
IC309
5 8
6 • Semiconductor Location
Ref no. Location Ref no. Location Ref no. Location Ref no. Location
D101 D5 D305 I4 D315 H5 Q108 D4
D102 D5 D306 I4 D316 I4 Q111 C3
D103 D5 D307 I5 D317 H4 Q117 C4
D104 D5 D308 I5 D318 H4 Q302 F4
D107 D5 D309 D5 D319 F4 Q307 G5
D108 C4 D310 D5 IC303 F4 Q308 G5
D109 I3 D311 H5 IC309 H5
D110 I3 D312 H5 IC310 H5
7 D303 I5 D313 H5 Q103 C3
D304 I5 D314 H5 Q105 C3
51
A B C D E F G H I J
R-840/NS-BP300
FUNCTION (2) P.C.B. (Side A)
No replacement part available.
SW701
CB701
DOCK
W701
IPR W702
AUDIO_RET
IPL
REM_SENSE
+5I
+5I
IGND
IGND
IPD_DET
IPD_ACC_EN
IPD_MISO
IPD_MOSI
IPAP_DET
MG
IPD_SW
FUNCTION (1) FUNCTION (1)
7 (CB301) (CB108)
52
A B C D E F G H I J
R-840/NS-BP300
FUNCTION (2) P.C.B. (Side B)
• Semiconductor Location
7 Ref no. Location

D703 G6
53
A B C D E F G H I J
R-840/NS-BP300
MAIN (1) P.C.B. (Side A)
CB504
2
L +/-
3
SPEAKERS
R +/-
C, V models
IC503
W504
OUT
COM
IN
CB505
W502
CB502 CB503
5 AGND
SGND_DAB
M_PS
MGND
SEL_L
E
SEL_R
E
+7V
-7V
TGND
+9T
PRTH
+5CPU
MG
SPKA_RLY
MMUTE
PRI
PRD
PRV2
PRV1
+VP
FL_GND
F1
F2
FUNCTION (1)
(CB305)
FUNCTION (1) POWER TRANSFORMER
+7V
E
-7V
PRV2
M_GND
M_PS
SGND1
F1
F2
(CB102)
• Semiconductor Location MAIN (2)

6 (CB401)
Ref no. Location Ref no. Location Ref no. Location

D503 C5 D515 E3 Q519 D3
PRTH
+5CPU
MG
D504 E4 D516 I5 Q520 D3
D505 E3 D517 H4 Q521 F3
MAIN (8)
D506 E3 IC503 I4 Q522 E3 (CB506)
D507 F3 Q513 D2 Q523 C2
D508 F3 Q514 F2 Q524 D2
D509 D3 Q515 D4 Q525 F2
D510 F3 Q516 E3 Q526 E2
7 D513 E3 Q517 F3 Q527 F4
D514 J4 Q518 F4 Q532 J5
54
A B C D E F G H I J
R-840/NS-BP300
MAIN (1) P.C.B. (Side B)
6
Ref no. Location Ref no. Location

D511 C3 Q510 D4
D512 E3 Q511 D4
D518 C5 Q512 C4
D519 D5 Q528 F4
D520 D4 Q529 F4
D521 D4 Q530 C3
Q507 C5 Q531 E3
7 Q508 D5 Q533 E4
Q509 D4 Q534 E4
55
A B C D E F G H I J
R-840/NS-BP300

A, B models
IC402
4 1
2
POWER TRANSFORMER
CB403
F1
3 F2

W401
FUNCTION (1)
(CB101)
HP_N_DET
LED_STBY
LED_EON
PWR_SW
FL_N_CS
FL_SDT
I_KEY0
+5M
+VP
ISB
A, B models
F1
CB402 CB401
LED_TIMR
LED_PWR
+3.3DAB
FL_N_IC
LED_PD
FL_SCK
FLGND
+5CPU
DAB_GND
REM
B, G models
+7V
E
-7V
PRV2
M_GND
M_PS
SGND1
F1
F2
4
MG
ISA
SGND
F2
FUNCTION (1)
(CB106) POWER TRANSFORMER
A, B models A, B models CB801
MAIN (1)
(W501)
TP
indicator INPUT
5 SW801
TIMER
indicator
• Semiconductor Location W804
PURE DIRECT
Ref no. Location indicator POWER
D401 C2 indicator
JK801
D402 D2 To chassis
SW803 SW804
D403 D3 SW802
6 D404 B3
D803 J6
W805
D804 I5 SW805
W801
To chassis PURE PRESET PHONES
D805 I5
DIRECT
D807 E6
D817 I5
D818 I6
HL_R
IC402 B2 HP_GND
Q401 C2 HP_L
Q402 D2
Q403 C2 MAIN (5)
7 (CB52)
Q404 D2
56
A B C D E F G H I J
R-840/NS-BP300
A, B models
B, G models
4
5 Ref no. Location

D405 A3
D801 H6
D802 H6
D806 F5
D808 E5
D809 E5
D810 E5
D811 E6
D812 E6
D813 E6
6
D814 F6
D815 I6
D816 I6
Q405 A3
Q406 A3
Q407 A3
Q803 J6
Q804 J5
Q807 H5
Q810 H5
7 Q811 F5
Q812 E6
57
A B C D E F G H I J
R-840/NS-BP300
MAIN (4) P.C.B. (Side A) MAIN (5) P.C.B. (Side A)
FUNCTION (1)
(CB103)
PLAYER_S10
PWR_DET
IPD_PON
PWR_RY
AC IN POWER
N_RST
+5BU
IGND
TRANSFORMER FUNCTION (1)
S10
MG
+5I
(CB109)
I-LRBAL
I-CNTR
MVOL+
+5CPU
MVOL-
MGND
I_VOL
M_PS
I-TRE
I-BAS
W1
MG
FG
8 14 W51
IC3
CB1
3
IC4
IC2
7 1
CB2 FUNCTION (1)

(W301)
1
HP_R
CB53
HP_GND
POWER HP_L + M +5CPU
TRANSFORMER MG
CB51
I-BAS
I-TRE
4 I-LRBAL
I-CNTR
HP_L
IC51
CB52
HP_GND
5
CB HP_R MAIN (6)
10
(W851)
1 4
MAIN (3)
CB4 CB3 (W801)
IC1 3 2 1
5
C, V models
MIN MAX
VOLUME • Semiconductor Location
Ref no. Location

6
D5 E4
D9 F3
D14 C4
D51 I4
IC1 F4
IC2 D3
IC3 D3
IC4 C3
IC51 I4
Q1 D4
7 Q3 E3
Q5 C3
58
A B C D E F G H I J
R-840/NS-BP300
MAIN (4) P.C.B. (Side B) MAIN (5) P.C.B. (Side B)
Ref no. Location

D1 D4
D2 E4
6
D3 D3
D4 E3
D6 E3
D7 D3
D11 D3
D12 D3
D13 D3
D52 H4
D53 H4
D54 H4
7 D55 H4
Q2 E4
59
A B C D E F G H I J
R-840/NS-BP300
MAIN (6) P.C.B. (Side A) MAIN (7) P.C.B. (Side A)
BALANCE TREBLE BASS
R L + - + -
3 W851
+5CPU
MG
MAIN (5) I_BAS
(CB51) I_TRE
I_LRBAL
I_CNTR
VCC
IC501
OUT
GND
CB506
6
PRTH
+5CPU
MG
MAIN (1)
(W502)
7 Ref no. Location

IC501 C5
60
A B C D E F G H I J
R-840/NS-BP300
MAIN (6) P.C.B. (Side B) MAIN (7) P.C.B. (Side B)
61
A B C D E F G H I J
R-840/NS-BP300
DAB P.C.B. (Side A) DAB P.C.B. (Side B)

A, B models A, B models
2
DAB MODULE
5 1
IC901
CB901
5
CB902
6 DAB_R
AGND
DAB_L
DRD_N_RST
DAB_SD
GND
DAB_BCK
GND
DAB_WCK
GND
DAB_MCK/SPDIF
GND
DAB_SCL
+3.3D
DAB_SDA
FUNCTION (1)
7 (CB303) Ref no. Location
A, B models
IC901 H4
62
A B C D E F G H I J K L M N
R-840/NS-BP300
SCHEMATIC DIAGRAMS
FUNCTION 1/3
1
IC301: LC72725KM-UY-TLM-E
RDS signal demodulation IC
+3V VREF FLOUT CIN +3V

Vdda Vddd
CLOCK
PLL
RECOVERY
REFERENCE (57kHz)
(1187.5Hz)
VOLTAGE
Vssa Vssd
VREF
57kHz
MPXIN ANTIALIASING BPF SMOOTHING DATA RDDA
(SCF)
POINT A XL301 (Pin 14 of IC301) FILTER FILTER DECODER
RDCL
RAM
(128bits) MODE
2 CLK(4.332MHz)
RST
A
RDS-ID RDS-ID/
(B, G models) TEST TEST
OSC DETECT READY
5.3
5.3
2.7
2.7
0
0
0
XIN XOUT
0
5.3 9.1
RDS-ID/READY 1 16 RDCL
5.4
RDDA 2 15 RST
RDS IC301
VREF 3 14 XOUT
MPXIN 4 13 XIN
2.3
Vdda 5 12 Vddd
5.3
2.3
0
4.5
2.3
2.3
2.9
2.9
Vssa 6 11 Vssd
FLOUT 7 10 MODE
1.4 CIN 8 9 TEST
0.8
5.4
IC302: NJM2752RB0
2-input/1-output stereo audio selector
CB303
(A, B models)
IC304
FUNCTION (1) LOGIC 5 CNT1
IN1A 2 1 OUTA
Page 70 C5 IN1B 9
to DAB_CB902 INPUT SELECTOR IN2A 4

10 OUTB
(A, B models) IC302
IN2B 7
3 V+
4 Vref 6 Vref
8 GND
IC304
IC303: NJW1194V
2-channel electronic volume input selector and tone control
7.0
OUT L
0
0 IC305 0
CLOCK
LATCH
DATA
ADR1
ADR0
Ach Tone Filter
CB302
V+ GND V- V-
0.3
0.3
5 0.2
Bias Control Logic

InA1
5.0
InA2 Zero Cross Detection
0
To FM TUNER 1.4 InA3 InA1 1 32 InB1
InA2 2 31 InB2
0 InA4 OutA
TONE InA3 3 30 InB3
9.1 InB4
InA4 4 29
InB1
3.3 GND 5 28 GND
0
0
0
0
-6.9
0 InB2
7.0
0 IC305 DCCAP_A 6 27 DCCAP_B
0
0
0
0
0
0
0
0
0
0
SELECTOR/ InB3 OutB GND 7 26 GND
0
0
TONE OutB
InB4 OutA 8 25
-6.8
IC303
VOLUME/ VDDOUT
DATA
9
10
24
23
ADR1
ADR0
DLOCK 11 22 V+
TONE CONTROL/ LATCH
GND
12
13
21
20
V-
GND
LME49723MAX/NOPB
BUFFER Tone_Tra 14 19 Tone_Tr1b
0
0
7.0
0
0
0 Tone_Ba1a 15 18 Tone_Ba1b
0
0
0
-2.0
0
5.1
5.1
0
Bch Tone Filter Tone_Ba2a 16 17 Tone_Ba2b
0
0
0
0 IC306 0
0 0
0
0 14.2
6 0
0
0
0
Page 66 B2
PLAYER 0 0 0
IC304, 305, 307, 310: NJM2068MD-TE2 IC306: LME49723MAX/NOPB
CD IN 0
0
to MAIN (1)_CB502 Dual operational amplifier
0 0 9.0 Dual high fidelity audio operational amplifier
0 -6.9
0 0
AUDIO IN 0 0 IC306
0
0
LME49723MAX/NOPB CB305 OUT1 1 8 +VCC OUTPUT A 1 8 V+

-6.8
0 0
–IN1 2 7 OUT2
+ – + –
0 0
7.0 +IN1 3 6 -IN2 INVERTING INPUT A 2 7 OUTPUT B
AUX 0
0 0
IC310 A B
0
–VCC 4 5 +IN2
0 - + + -
NON-INVERTING
3 6 INVERTING INPUT B
0 INPUT A
0
7 NON-INVERTING
0 0 V- 4 5
INPUT B
0 IC310 0
0 -6.8
7.0
0
IC307
IC308: BA15218F IC309: NJM4580E
0 0
7.0 6.4 Dual high slew rate, low noise operational amplifier Dual operational amplifier
6.4
7.0 V+
0 OUT1 1 8 VCC 8
IC308 0
0 0 0
-6.8 -6.8
– IN1 2 7 OUT2
2, 6 1, 7 OUTPUT
iPod IN 0 0
0 0 –
1ch
+ –INPUT
0 +INPUT
2ch
0 + IN1 3 + – 6 – IN2 3, 5
Page 64 I5 0 0
8 0
0
0
to FUNCTION (2)_W701 0 0 0 W301 VEE 4 5 + IN2

-6.8 -6.8
CB301 0 0 V–
IC307
4
0 0
0
-6.8 0 0
-6.9
IC308
Page 69 B7
0
-6.3
to MAIN (5)_CB53
-6.9 -6.3
SW OUT
-6.8
0 7.0
0 IC309 0 0
IC309
9 OUTPUT 0
0
SUBWOOFER 0
-6.8
0 0
0 0
10
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
63
R-840/NS-BP300
FUNCTION 2/3
1
2
FUNCTION (2)
0.9
-4.9
0
DOCK
0
5
0
CB701
Page 63 B8
to FUNCTION (1)_CB301
0
0
0.7 iPod IN
W701
-4.9
0.7
-4.9
0
6
5.1
0
0.6
0.2
7 0.6
0
Page 65 J2
5.1 to FUNCTION (1)_CB108
-4.9
-4.9
0
0
8 W702
10
64
R-840/NS-BP300
FUNCTION 3/3
1
Page 69 B2 Page 67 B4 Page 64 I7

to MAIN (4)_W1 to MAIN (2)_W401 to FUNCTION (2)_W702
(A, B models)
2 D 1
SYSTEM
IC106
IC108
IC103
CONNECTOR
0 0 0
FUNCTION (1) 0
10.2
0
TO:PLAYER 0 0
0
0
-4.9
-4.9
5.1
0
4.7
0
5.1
5.1
5.1
0
0
0
5.1
2
0.6
0.2
0.6
10.2
0
0
0
0
JK101
0
2.6
IC106
3.3
3.3
0 5.1 REG
3.3
27.3
IC105
3.3 5.1
0
3 4.6 5.1
5.0 5.1 5.8
0
4.6
0 0
5.1
5.1
5.1 0 4.4
5.1 0
10.2
5.1 1.0
0
0 0
5.8
5.1 2.6 5.1
5.1 0
IC104
5.1 0 0 0 2.6
0 0
5.1
5.0 3.3 3.3
IC103
5.1 0
5.1
5.1
5.8 3.9 0 0
IC107
0.6 5.1
3.3 0
Page 68 G9 0
5.1 3.9
to MAIN (3)_CB801
5.0 0.7
0
4 0
5.1 0
5.0
0 5.0
5.0
0 0
5.0 5.0
0 0
0 5.0
3.3
5.1
5.1
0
0
5.1
5.1
CB101
3.3
5.1
5.1
5.1
5.1
5.1
4.7
5.1
5.1
5.1
0 0
0
5.1
1.0
2.6
2.6
5.0
5.0
0
0
0
0
IC101: R5F3640DNFA
0
0 0 IC102: M24C02-RDW6TP
Single-chip 16-bit CMOS microprocessor
4.2 2 K-bit and 1 K-bit serial I2C bus EEPROM
5 5.0
5.0
8 8 8 8 8 8 VCC
5.1 0.2
4.9 0.3 Port P0 Port P1 Port P2 Port P3 Port P4 Port P5 3
4.9 0.3 E0-E2 SDA

VCC2 ports E0 1 8 VCC
CB105 M24Cxx
E1 2 7 WC
0 5.1 Internal peripheral functions
SCL
E2 3 6 SCL
(For factory) UART or clock synchronous Clock generation circuit VSS 4 5 SDA
0 0 Timer (16-bit)
serial I/O X IN-XOUT WC
0
MICROPROCESSOR 0 0 Outputs (timer A): 5
(6-channels) XCIN-XCOUT
PLL frequency synthesizer
Clock synchronous On-chip oscillator (125 kHz)
Inputs (timer B): 6 serial I/O
5.0 0 (8 bits x 2 channels)
VSS
DMAC
Three-phase motor control circuit (4 channels)
0 IC101 0
CRC arithmetic circuit (CCITT)
2.5 0 0 Watchdog timer (Polynomial : X 16 +X12 +X5+1)
(15-bits)
2.5 0 M16C/60 series
A/D converter Memory
Microprocessor core
(10-bits X 26-channels) ROM
2.5 2.5 0 SB
D/A converter R0H R0L
R1H R1L USP RAM
2.5 2.5 0
6 14.2 2.5 0
(8-bits X 2-channels) R2
R3
ISP
INTB
A0 PC
A1
Page 69 F7 0 2.5 0.6
A1
FB
FB
FLG Multiplier
to MAIN (5)_W51 4.6 0 0.6

VCC1 ports
4.6 0.5 0
B C Port P10 Port P9 Port P8 Port P7 Port P6
8 8 8 8 8
0 5.1 0
0.7 5.1
2.6 5.1
5.1
5.1
5.0 2.9 0
0
CB109 IC103: MFI341S2164 IC104, 107: TC7SZ125FU

Bus buffer 3-state output
0
IC digital
2.4
0
1.0
1.7
5.1
0
0
5.1
5.1
5.1
5.1
0.6
5.1
5.1
1.9
0
0
P4/IRQ
0
0
3.3 P3/IRQ G 1
0
0
0
Vcc H8/300H 5 Vcc
I/O port P2/IRQ
0
0
Vss
0
7 MICROPROCESSOR P1/IRQ
0
0 0.2
5.0 System control RNG IN A 2
WDT
FMU
Security logic Voltage monitoring circuit
0 0.6
Internal address bus
GND 3 4 OUT Y
ROM (112 kbytes)
5.1 5.0 0 Internal data bus
5.1 IC108 0 0.6 RES RAM (4 kbytes)
Power-on
EEPROM (16 kbytes + 2 kbytes)
Writing port
NC
NC
NC
NC
NC
reset circuit
0
Interval timer 1
5.1 0 20 19 18 17 16
CB104
5.1 Interval timer 2 NC 1 15 NC
P4/IRQ 2 14 P3/IRQ
-6.8 On-chip
Modular multiplication Register
oscillator NC 3 Top view 13 P1/IRQ
coprocessor (512 bytes)
5.1 RES 4 12 P2/IRQ
Vcc 5 11 Vss
6 7 8 9 10
-6.8
NC
NC
NC
NC
NC
0
5.1
5.1
0
8 IC102 0
0
0 0
0
5.1
0 0
5.1 0 IC105, 106: TC7SET08FU IC108: TC7WH125FK IC109: R1154H058B-T1-F
2 input AND gate Dual bus buffer Voltage regulator
G1 1 8 Vcc Thermal
Key detection for A/D port IN B 1 5 VCC Protection
A1 2 7 G2
Key input (A/D) pull-up resistance 10 k-ohms VDD 3 1 VOUT
EEPROM IN A 2
Y2 3 6 Y1
Ohm 0 +1.2 k +91 k GND 3 4 OUT Y GND 4 5 A2

4 NC
5.0
-6.8
4.6
4.6
27.3
5.0
2.6
2.6
V 0 – 0.2 0.3 – 0.8 4.0 – 5.0

0
1.0
Vref
0
0
0
A B Y
A/D value (5V=1024) 0 – 40 60 – 165 820 – 1023
CB102
L L L Short Current
9 L
H
H
L
L
L
Protection
Circuit
Limit
Circuit
H H H
CE 5 2 GND
Pin No. Symbol Description

1 VOUT Output Pin for Voltage Regulator
Page 66 D2 2 GND Ground
3 CE Chip Enable Pin (active at "H")
to MAIN (1)_CB503 4 NC† No Connection
5 VDD Power Supply Pin
POINT B XL101 (Pin 10 of IC101) POINT C XL102 (Pin 13 of IC101) POINT D 1 / CB103 (+5BU), 2 / CB103 (N_RST)
10 CB103 1 CB103 1
(+5BU) (+5BU)
CB103 2 CB103 2 ★ Components having special characteristics are marked and must be replaced
(N_RST) (N_RST)
POWER ON POWER OFF POWER ON

65
R-840/NS-BP300
MAIN 1/4
1
Page 63 K6 Page 69 J5 Page 65 D9

Page 67 B7
to FUNCTION (1)_CB305 to MAIN (8)_CB506 to FUNCTION (1)_CB102
to MAIN (2)_CB401
CB502
CB503
W501
W502
0
4.9
0.8
4.4
4.4
4.4
4.4
7.0
0
-6.9
MAIN (1)
2.4
14.2
0.8
0
0
2.4
2.4
27.0
9.0
0
-6.9
7.0
0
14.2
0
0
0
0
0
4.9
0
-6.9
0
0
4.9
2 REGULATOR
IC503
9.1 14.2
0
32.1
7.7
4.4 20.0
7.7 20.0
39.2
3.8
AC57.8
0 0
36.2 36.8 0
-39.4
To POWER TRANSFORMER
27.0
27.8
CB505
4 27.9
OUT L 0
39.0
5 39.2
39.2
38.7
38.1 39.0
39.2
1.1 38.8
0
1.2 0
39.2
38.8
0
0.2 0
0.2 38.8
0
0
1.1 0
1.1
-0.5 0
38.1 39.2
6 -1.2
-1.2
0 -0.2
-0.7
-0.7 -0.2
0
-0.6
-0.6
-1.2
-39.5
-1.2
CB504
-39.5 0
-0.7 -38.4
-38.4 0 0
-38.3
-39.0 0
-6.8 0 -38.9 -38.9
0
-38.3 0
0
7 -39.5
-39.5
SPEAKERS
-39.3
-39.3
0
-6.8 -38.9
0
-38.9 -38.8
0 -38.4
-38.4 -38.2
0
-0.6 38.2 38.2
-39.3
-1.0 -39.3
-1.0
-0.5
-0.5
8 0
-0.6 -0.2
-0.6
0 -0.2
-1.0 -1.0
38.0 39.2 IC503: KIA7809API-U/P
-0.4 Voltage regulator
0
1.1 0 1 INPUT
1.1
R22 R17 R23
38.9
0 R1 Q11 Q11-1
0.6
0.6 Q15
Q16
Q12
1.1 39.3 Q14 R14
R10 R15
38.0 Q17 Q19
R19 R16
9 38.7 39.3
R12
Q18 Q6 R20
3 OUTPUT
Q1
R18
R11 R9
Z1 R7 C1
R2 Q10
Q2
Q7 R21
Q13 R3
Q4
Q3 Q5 Q9 Q8
R13
R4 R5 R6 R8
2 COMMON (GND)
10
66
R-840/NS-BP300
MAIN 2/4
1
IC402: NJM2388F33
Low dropout voltage regulator with ON/OFF control
2
VIN 1 2 VOUT
Bandgap
Reference
ON/OFF
Cont 4 control
Over Voltage Thermal Over Current

Protection Protection Protection
GND 3
REGULATOR
IC402
W401
Page 65 I2
(A, B models) To POWER TRANSFORMER
(A, B models)
CB402
7.1 14.2 AC2.9
CB401
4.6 14.2
4.6 8.3 14.2

8.3
0 8.3
AC23.1
7 Page 66 F2 0 0
14.2
to MAIN (1)_W501
0 CB403
2.6
-6.9 -15.0
0
0
7.1 0
-8.1
8 -8.1
-15.0 MAIN (7)
-15.0
-6.9 -15.0
9 MAIN (2)
10
67
R-840/NS-BP300
MAIN 3/4
1
MAIN (3)
4.6
3.5
5.0
27.2
4.6
0
0.6
5.1
5.1
0
0
5.1
27.2 5.0
3 5.5
5.0
0
Ohm 0 +1.2 k +91 k
V 0 – 0.2 0.3 – 0.8 4.0 – 5.0
A/D value (5V=1024) 0 – 40 60 – 165 820 – 1023
0 0
PRESET PURE 0 0
DIRECT
5.2
INPUT
5.2
4.8 0 5.1 0
4.3 5.1 4.6
5 0.6
TIMER TP
5.2 indicator 5.1 indicator 0
5.1
PURE-
DIRECT
3.5 indicator
3.8
2.9
0 0
2.0 0.6 0
POWER 0 0
W805
indicator 0 0
0 0 0
6 0
Page 69 D10
7 to MAIN (5)_CB51
MAIN (6)
W851
0
0
0 0
5.1
2.6
2.6
2.5
2.6
0 0
8 0 0
0 0
0 0
JK801 0 0
0 0
PHONES
0
0
5.0
5.1
5.1
5.1
5.1
0
0.6
5.1
5.0
27.3
0
5.0
5.0
5.1
5.1
4.6
4.6
9
0
W804
0
0
CB801
W801
Page 65 B3
Page 69 C7 to FUNCTION (1)_CB101
to MAIN (5)_CB52
10
68
R-840/NS-BP300
MAIN 4/4
1
REGULATOR
Page 65 G2
AC IN
IC1
AC8.1
W1
CB2
CB5
0 0 0
CB1
4.9
0
10.1
0
2
4.7
4.9
0
5.1
5.1
5.1
CB3 CB4
10.1
0
0
~ ~
4.0 IC1: NJM2388F05
Low dropout voltage regulator with ON/OFF control
0 ~ ~
3 VIN VOUT
7.6
0
5.1
7.6
1.0 4.0 Bandgap
Reference
4.9
IC4
ON/OFF
Cont control
3.8
5.1
Over Voltage Thermal Over Current
0 0 Protection Protection Protection
0 0.2
5.0 4.9 ~ 0 GND
4.9 1.0 4.1 7.6 0
IC3
0
0 0.2 4.1
0 0 0
0 0
4
0
0 0 IC4: TC4013BP
0
Dual D-type flip flop
0 0
RESET1 4
IC2
SET1 6 1 Q1
DATA1 5
2 Q1
0 10.1 10.1 1.0 1.0 ~ CL CL
CL CL
CLOCK1 3 CL
CL
4.2 RESET2 10 Q1 1 14 VDD
SET2 8 13 Q2 Q1 2 13 Q2
5 10.1 0 DATA2 9
12 Q2 CK1 3 12 Q2
CL CL
RESET1 4 11 CK2
CL CL
IC501 CLOCK2 11 CL DATA1 5 10 RESET2
3.9 AC6.9 CL
SET1 6 9 DATA2
Page 66 D2 VSS 7
VDD 14 Vss 7 8 SET2

to MAIN (1)_W502
INPUTS OUTPUTS
CB506 RESET SET DATA CK Qn + 1 Qn + 1
L H H L
H L L H
MAIN (4) MAIN (8) H H H H
L L L L H : Don't care
L L H H L : Level change
L L Qn˙ Qn˙ ˙ : No change
IC501: LM61CIZ
Temperature sensor
Page 63 K8 Page 68 D9
to FUNCTION (1)_W301 to MAIN (3)_W801
IC51: LB1641
CB53
CB52
Motor driver
7 0
W51
OUT 1
OUT 2
VCC 2
VCC 1
0
5.0
0
P1
P2
0
0
3 2 8 10 9 7
0.8
3 0
PRE DRIVER
2 4.6
4.6 4 VZ
MOTOR DRIVER 0 Page 65 B6

1 to FUNCTION (1)_CB109
0.6 0 0 14.2
0.8 0 0 2.5
0 0 IN 1 5 INPUT LOGIC
8 14.2 2.5
GND 1
6 IN 2
0 0
14.2 2.5
4.6 2.5
VOLUME
4.6
1.0
0.8
IC51
0.6
0
9
2.5
2.5
5.0
2.5
2.5
0
MAIN (5)
CB51
Page 68 K7
10
to MAIN (6)_W851
69
R-840/NS-BP300
DAB
1
IC901: PQ012GN01ZPH
Low power loss regulator
DC input DC output
1 3
(Vin) (Vo)
IC
Bias power supply
2
(VB)
5
GND
A, B models
IC901
3.5
3.5
1.3
3.5
0
CB901
1.3
3
3.5
0
0
3.5
0
3.5
4
3.5
0
0
0
CB902
3.3 0
3.5 3.3
5 3.3 3.3 To DAB MODULE
0 3.3
0 3.5
0 3.5
1.8 0
Page 63 B4 0 3.3
6 1.8 0
0 3.5
0 0
3.3 0
0 1.7
0 1.8
0 1.8
7
0
0
0
0
10
70
R-840/NS-BP300
■ REPLACEMENT PARTS LIST

• ELECTRICAL COMPONENT PARTS
WARNING
● Components having special characteristics are marked and must be replaced with parts having specifications
equal to those originally installed.
ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS:

C.A.EL.CHP : CHIP ALUMI.ELECTROLYTIC CAP L.EMIT : LIGHT EMITTING MODULE
R-840/NS-BP300
C.CE : CERAMIC CAP LED.DSPLY : LED DISPLAY
C.CE.ARRAY : CERAMIC CAP ARRAY LED.INFRD : LED,INFRARED
C.CE.CHP : CHIP CERAMIC CAP MODUL.RF : MODULATOR,RF
C.CE.ML : MULTILAYER CERAMIC CAP PHOT.CPL : PHOTO COUPLER
C.CE.M.CHP : CHIP MULTILAYER CERAMIC CAP PHOT.INTR : PHOTO INTERRUPTER
C.CE.SAFTY : RECOGNIZED CERAMIC CAP PHOT.RFLCT : PHOTO REFLECTOR
C.CE.TUBLR : CERAMIC TUBULAR CAP PIN.TEST : PIN,TEST POINT
C.CE.SMI : SEMI CONDUCTIVE CERAMIC CAP PLST.RIVET : PLASTIC RIVET
C.EL : ELECTROLYTIC CAP R.ARRAY : RESISTOR ARRAY
C.MICA : MICA CAP R.CAR. : CARBON RESISTOR
C.ML.FLM : MULTILAYER FILM CAP R.CAR.CHP : CHIP RESISTOR
C.MP : METALLIZED PAPER CAP R.CAR.FP : FLAME PROOF CARBON RESISTOR
C.MYLAR : MYLAR FILM CAP R.FUS : FUSABLE RESISTOR
C.MYLAR.ML : MULTILAYER MYLAR FILM CAP R.MTL.CHP : CHIP METAL FILM RESISTOR
C.PAPER : PAPER CAPACITOR R.MTL.FLM : METAL FILM RESISTOR
C.PLS : POLYSTYRENE FILM CAP R.MTL.OXD : METAL OXIDE FILM RESISTOR
C.POL : POLYESTER FILM CAP R.MTL.PLAT : METAL PLATE RESISTOR
C.POLY : POLYETHYLENE FILM CAP RSNR.CE : CERAMIC RESONATOR
C.PP : POLYPROPYLENE FILM CAP RSNR.CRYS : CRYSTAL RESONATOR
C.TNTL : TANTALUM CAP R.TW.CEM : TWIN CEMENT FIXED RESISTOR
C.TNTL.CHP : CHIP TANTALUM CAP R.CEMENT : CEMENT RESISTOR
C.TRIM : TRIMMER CAP SCR.BND.HD : BIND HEAD B-TIGHT SCREW
CN : CONNECTOR SCR.BW.HD : BW HEAD TAPPING SCREW
CN.BS.PIN : CONNECTOR,BASE PIN SCR.CUP : CUP TIGHT SCREW
CN.CANNON : CONNECTOR,CANNON SCR.TERM : SCREW TERMINAL
CN.DIN : CONNECTOR,DIN SCR.TR : SCREW,TRANSISTOR
CN.FLAT : CONNECTOR,FLAT CABLE SUPRT.PCB : SUPPORT,P.C.B.
CN.POST : CONNECTOR,BASE POST SURG.PRTCT : SURGE PROTECTOR
COIL.MX.AM : COIL,AM MIX SW.TACT : TACT SWITCH
COIL.AT.FM : COIL,FM ANTENNA SW.LEAF : LEAF SWITCH
COIL.DT.FM : COIL,FM DETECT SW.LEVER : LEVER SWITCH
COIL.MX.FM : COIL,FM MIX SW.MICRO : MICRO SWITCH
COIL,OUTPT : OUTPUT COIL SW.PUSH : PUSH SWITCH
DIOD.ARRAY : DIODE ARRAY SW.RT.ENC : ROTARY ENCODER
DIODE.BRG : DIODE BRIDGE SW.RT.MTR : ROTARY SWITCH WITH MOTOR
DIODE.CHP : CHIP DIODE SW.RT : ROTARY SWITCH
DIODE.VAR : VARACTOR DIODE SW.SLIDE : SLIDE SWITCH
DIOD.Z.CHP : CHIP ZENER DIODE TERM.SP : SPEAKER TERMINAL
DIODE.ZENR : ZENER DIODE TERM.WRAP : WRAPPING TERMINAL
DSCR.CE : CERAMIC DISCRIMINATOR THRMST.CHP : CHIP THERMISTOR
FER.BEAD : FERRITE BEADS TR.CHP : CHIP TRANSISTOR
FER.CORE : FERRITE CORE TR.DGT : DIGITAL TRANSISTOR
FET.CHP : CHIP FET TR.DGT.CHP : CHIP DIGITAL TRANSISTOR
FL.DSPLY : FLUORESCENT DISPLAY TRANS : TRANSFORMER
FLTR.CE : CERAMIC FILTER TRANS.PULS : PULSE TRANSFORMER
FLTR.COMB : COMB FILTER MODULE TRANS.PWR : POWER TRANSFORMER ASS’Y
FLTR.LC.RF : LC FILTER,EMI TUNER.AM : TUNER PACK,AM
GND.MTL : GROUND PLATE TUNER.FM : TUNER PACK,FM
GND.TERM : GROUND TERMINAL TUNER.PK : FRONT-ENDTUNER PACK
HOLDER.FUS : FUSE HOLDER VR : ROTARY POTENTIOMETER
IC.PRTCT : IC PROTECTOR VR.MTR : POTENTIOMETER WITH MOTOR
JUMPER.CN : JUMPER CONNECTOR VR.SW : POTENTIOMETER WITH ROTARY SW
JUMPER.TST : JUMPER,TEST POINT VR.SLIDE : SLIDE POTENTIOMETER
L.DTCT : LIGHT DETECTING MODULE VR.TRIM : TRIMMER POTENTIOMETER
71
R-840/NS-BP300
P.C.B. FUNCTION
Ref No. Part No. Description Markets Ref No. Part No. Description Markets
* WS536300 P.C.B. FUNCTION C C180 US061470 C.CE.CHP 47pF 50V B
* WS536400 P.C.B. FUNCTION TK C181-182 US135100 C.CE.CHP 0.1uF 16V
* WS536500 P.C.B. FUNCTION A * C183 UR019100 C.EL 1000uF 6.3V
* WS536600 P.C.B. FUNCTION B C301-302 US063100 C.CE.CHP 1000pF 50V B
* WS536700 P.C.B. FUNCTION G C303 US135100 C.CE.CHP 0.1uF 16V BG
* WS536800 P.C.B. FUNCTION L C304 UR237470 C.EL 47uF 16V BG
R-840/NS-BP300
* WS536900 P.C.B. FUNCTION V C305-306 US061270 C.CE.CHP 27pF 50V B BG

* CB101 VQ047700 CN.BS.PIN 22P C307 US062330 C.CE.CHP 330pF 50V B BG
CB102 V7828000 SOCKET 13P SE TUC SERIES C308 UR237470 C.EL 47uF 16V BG
CB103 VB858900 CN.BS.PIN 10P C309-310 WE100500 C.PP 100pF 630V
CB104 VQ044400 CN.BS.PIN 9P C311-312 US062100 C.CE.CHP 100pF 50V B
CB105 VB389900 CN.BS.PIN 3P C313-314 US062330 C.CE.CHP 330pF 50V B BG
CB106 LB918030 CN.BS.PIN 3P AB C315-316 US062100 C.CE.CHP 100pF 50V B AB
CB108 VB389600 CN.BS.PIN 11P C317-318 US063100 C.CE.CHP 1000pF 50V B
CB109 VC166500 CN.BS.PIN 12P C319 US062330 C.CE.CHP 330pF 50V B BG
CB301 VB858300 CN.BS.PIN 4P C320 UR267330 C.EL 33uF 50V BG
CB302 VM859500 CN.BS.PIN 11P C321 US126100 C.CE.CHP 1uF 10V BG
CB303 VM859600 CN.BS.PIN 15P AB C322 UR267330 C.EL 33uF 50V
CB305 V7827900 SOCKET 12P TE TUC SERIES C323-324 UR038100 C.EL 100uF 16V
C101 US061330 C.CE.CHP 33pF 50V B C325-326 US135100 C.CE.CHP 0.1uF 16V
C102 US062100 C.CE.CHP 100pF 50V B C327-328 UR038100 C.EL 100uF 16V
C103 US061330 C.CE.CHP 33pF 50V B C329-330 US135100 C.CE.CHP 0.1uF 16V
C104-111 US062100 C.CE.CHP 100pF 50V B C331-332 UR237100 C.EL 10uF 16V
C112 US035100 C.CE.CHP 0.1uF 16V B C333 UR237220 C.EL 22uF 16V AB
C115 US065100 C.CE.CHP 0.1uF 50V B C337 UR237220 C.EL 22uF 16V AB
C116 US035100 C.CE.CHP 0.1uF 16V B C338 UR237220 C.EL 22uF 16V
C117-118 US062100 C.CE.CHP 100pF 50V B C339 US135100 C.CE.CHP 0.1uF 16V AB
C119 US135100 C.CE.CHP 0.1uF 16V C341-342 US062100 C.CE.CHP 100pF 50V B AB
C120-124 US062100 C.CE.CHP 100pF 50V B C343-344 US062100 C.CE.CHP 100pF 50V B
C125 US135100 C.CE.CHP 0.1uF 16V C345-346 US063100 C.CE.CHP 1000pF 50V B
C126 UB446100 C.CE.CHP 1uF 16V C347-348 WP420700 C.PP 100pF 100V
C127 US062100 C.CE.CHP 100pF 50V B C351-352 UF437470 C.EL.CHP 47uF 16V AB
C128-129 US135100 C.CE.CHP 0.1uF 16V C353-356 UF437470 C.EL.CHP 47uF 16V
C130 UB446100 C.CE.CHP 1uF 16V C357-358 US062100 C.CE.CHP 100pF 50V B AB
C131-132 US135100 C.CE.CHP 0.1uF 16V C359-362 US063100 C.CE.CHP 1000pF 50V B
C133 US035100 C.CE.CHP 0.1uF 16V B C363-364 WP420700 C.PP 100pF 100V
C134 US061330 C.CE.CHP 33pF 50V B C365-368 UF437100 C.EL.CHP 10uF 16V AB
C135-136 US135100 C.CE.CHP 0.1uF 16V C369 UR238100 C.EL 100uF 16V AB
C137-141 US062100 C.CE.CHP 100pF 50V B C370 UB446100 C.CE.CHP 1uF 16V AB
C142-146 US135100 C.CE.CHP 0.1uF 16V C371-372 WJ611400 C.MYLAR 0.1uF 100V J
C154 UR237100 C.EL 10uF 16V C381-382 UR038100 C.EL 100uF 16V
C155 US135100 C.CE.CHP 0.1uF 16V C385 UR047100 C.EL 10uF 25V
C156 UR237100 C.EL 10uF 16V C386-387 US061220 C.CE.CHP 22pF 50V B
C157 UR219100 C.EL 1000uF 6.3V C390 US061220 C.CE.CHP 22pF 50V B
C158 UR818220 C.EL 220uF 6.3V C391-392 WB575600 C.MYLA.CHP 0.0033uF 50V
C159 UR237100 C.EL 10uF 16V C395-396 WB573700 C.MYLA.CHP 0.1uF 16V
C160-163 US061330 C.CE.CHP 33pF 50V B C397-398 UR266470 C.EL 4.7uF 50V
C164 UR237100 C.EL 10uF 16V C399-402 UR237100 C.EL 10uF 16V
C165-166 UR037470 C.EL 47uF 16V C403-406 US062100 C.CE.CHP 100pF 50V B
C169 WB165500 C.EL 0.33F 5.5V C409-410 US062100 C.CE.CHP 100pF 50V B
C170 US135100 C.CE.CHP 0.1uF 16V C415 US063100 C.CE.CHP 1000pF 50V B
C171-176 US064100 C.CE.CHP 0.01uF 50V B C416 US063120 C.CE.CHP 1200pF 50V B
C177-178 US135100 C.CE.CHP 0.1uF 16V C417 VE326400 C.MYLAR 0.22uF 50V
✻ New Parts ✻ New Parts
72
R-840/NS-BP300
P.C.B. FUNCTION and P.C.B. MAIN

C419 UF437100 C.EL.CHP 10uF 16V Q112-113 WG261200 FET 2SK2158-T2B-A AB
C420 US135100 C.CE.CHP 0.1uF 16V Q114 VV655700 TR.DGT DTC144EKA
C421 US062100 C.CE.CHP 100pF 50V B Q115-116 WG261200 FET 2SK2158-T2B-A
C422-423 UF437470 C.EL.CHP 47uF 16V Q117 VV556400 TR 2SC2412K Q,R,S
C424 US135100 C.CE.CHP 0.1uF 16V Q301 iC174020 TR 2SC1740S QRS BG
C425 US063330 C.CE.CHP 3300pF 50V B Q302 VV556400 TR 2SC2412K Q,R,S BG
R-840/NS-BP300
C426 UF437100 C.EL.CHP 10uF 16V AB Q306-310 WC883400 TR 2SD2704 K
C427-428 US062100 C.CE.CHP 100pF 50V B Q312 V4096100 TR 2SC4614 S,T
C429-430 UR038100 C.EL 100uF 16V Q313 V4096000 TR 2SA1770 S,T
C431-432 WB573700 C.MYLA.CHP 0.1uF 16V Q701-702 WH445000 FET 3LN01C-TB-E
C433-434 UR238470 C.EL 470uF 16V R214 HV753220 R.CAR.FP 2.2Ω 1/4W
C435-436 US063100 C.CE.CHP 1000pF 50V B R329 V8070100 R.MTL.FLM 2.2Ω 1W
C437-438 UF437100 C.EL.CHP 10uF 16V R331 V8070100 R.MTL.FLM 2.2Ω 1W
C439-440 US135100 C.CE.CHP 0.1uF 16V R390-391 V8070100 R.MTL.FLM 2.2Ω 1W
C443-444 US062100 C.CE.CHP 100pF 50V B SW701 WD483100 SW.TACT SKRGAAD010
C447-448 US062100 C.CE.CHP 100pF 50V B XL101 VQ328900 RSNR.CRYS 32.768KHz
C702 US135100 C.CE.CHP 0.1uF 16V XL102 WF997400 RSNR.CE 20MHz
C716-717 UF118220 C.EL.CHP 220uF 6.3V XL301 V3930900 RSNR.CRYS 4.332MHz BG
* D101-104 WS694000 DIODE.ZENR HZU5.1B2 TRF-E
D105-106 VT332900 DIODE 1SS355
* D107 WS694000 DIODE.ZENR HZU5.1B2 TRF-E
* D108 WS692900 DIODE.ZENR HZU3.9B2 TRF-E * WS535400 P.C.B. MAIN CV
D109-112 VT332900 DIODE 1SS355 * WS535500 P.C.B. MAIN T
D301-310 VT332900 DIODE 1SS355 * WS535600 P.C.B. MAIN K
* D311-318 WS694200 DIODE.ZENR HZU5.6B TRF-E * WS535700 P.C.B. MAIN A
* D319 WS694200 DIODE.ZENR HZU5.6B TRF-E BG * WS535800 P.C.B. MAIN B
D703 WC413300 DIODE.ZENR RSB6.8S 6.8V * WS535900 P.C.B. MAIN G
F701 V2429100 SW.POLY SMDC100-02 * WS536000 P.C.B. MAIN L
IC101 YA013A00 IC.CPU R5F3640DNFA CPU (unwritten) CB1 LB918020 CN.BS.PIN 2P
IC102 X9056A00 IC M24C02-RDW6TP CB2 VP245600 CN 2P
* IC104 X2973A00 IC TC7SZ125FU CB3-4 WN103000 CLIP.FUSE TP00351-31
IC105-106 X8398A00 IC TC7SET08FU(T5L,JF) CB5 VG879900 CN.BS.PIN 2P
* IC107 X2973A00 IC TC7SZ125FU CB51 VB390200 CN.BS.PIN 6P
IC108 X8201A00 IC TC7WH125FK CB52-53 VB858200 CN.BS.PIN 3P
IC109 X9428A00 IC R1154H058B-T1-F CB401 LB919090 CN.BS.PIN 9P
IC301 X8235A00 IC LC72725KM BG CB402 LB919030 CN.BS.PIN 3P AB
* IC302 YA855A00 IC NJM2752RB2 AB CB403 LB918050 CN.BS.PIN 5P
IC303 X8355A00 IC NJW1194 CB502 V7826200 CN 12P TE TUC SERIES
IC304 X3505A00 IC NJM2068MD-TE2 AB CB503 V7826300 CN 13P TE TUC SERIES
IC305 X3505A00 IC NJM2068MD-TE2 CB504 VB390000 CN.BS.PIN 4P
IC306 YA089A00 IC LME49723MAX/NOPB CB505 LB932040 CN.BS.PIN 4P
IC307 X3505A00 IC NJM2068MD-TE2 CB506 VB858200 CN.BS.PIN 3P
IC308 XS377A00 IC BA15218F OP AMP CB801 VQ045200 CN.BS.PIN 22P
IC309 X2331A00 IC NJM4580E OP AMP C1 US064100 C.CE.CHP 0.01uF 50V B
IC310 X3505A00 IC NJM2068MD-TE2 C2 US135100 C.CE.CHP 0.1uF 16V
JK101 VV881000 CN.DIN 8P CMS5008-0101 C3 WN165300 C.PP 0.01uF 100V
PJ301 VV551500 JACK.PIN 4P C4 UU239330 C.EL 3300uF 16V
PJ302 WH981900 JACK.PIN RCA-107AG-01 C5 UR237220 C.EL 22uF 16V
Q101-102 VV655000 TR.DGT DTA114EKA C6 UR266220 C.EL 2.2uF 50V
Q103 VV556500 TR 2SA1037K Q,R,S C7 UR265330 C.EL 0.33uF 50V
Q104 VP872600 TR 2SA1708 S,T C8 UR739470 C.EL 4700uF 16V
Q105 VV655700 TR.DGT DTC144EKA C9 WN165300 C.PP 0.01uF 100V
Q106 VV655300 TR.DGT DTA144EKA AB C10 UR266220 C.EL 2.2uF 50V
Q107 VD303700 TR 2SC3326 A,B C11 WN165300 C.PP 0.01uF 100V
Q108 VV655700 TR.DGT DTC144EKA AB C12 VE326000 C.MYLAR 0.1uF 50V
Q109 WG261200 FET 2SK2158-T2B-A C13 WJ361200 C.POL.MTL 0.047uF 400V CV
Q110-111 VV655300 TR.DGT DTA144EKA C13 WJ361800 C.POL.MTL 0.022uF 630V TKABGL
73
R-840/NS-BP300
P.C.B. MAIN
C14 UR266100 C.EL 1uF 50V C811 US135100 C.CE.CHP 0.1uF 16V
C15 WN165000 C.PP 4700pF 100V C812 US065100 C.CE.CHP 0.1uF 50V B
C16 WB696300 C.POL.MTL 0.1uF 400V CV C813-814 US063100 C.CE.CHP 1000pF 50V B
C16 WD257600 C.PP 0.047uF 800V TKABGL C815 US126100 C.CE.CHP 1uF 10V
C17 V6185300 C.CE.SAFTY 0.01uF 275V * C817 WG863700 C.CE.M.CHP 1uF 50V
C51 UN866100 C.EL 1uF 50V C818 US065100 C.CE.CHP 0.1uF 50V B
R-840/NS-BP300
C52 WJ605000 C.MYLAR 0.01uF 50V J C819-821 US064100 C.CE.CHP 0.01uF 50V B
C54-60 US064100 C.CE.CHP 0.01uF 50V B C822 US135100 C.CE.CHP 0.1uF 16V
C401-402 UR038100 C.EL 100uF 16V C823-826 US064100 C.CE.CHP 0.01uF 50V B
C404 UR838100 C.EL 100uF 16V AB C827-828 US062100 C.CE.CHP 100pF 50V B
C406-407 UR267100 C.EL 10uF 50V C829 US061330 C.CE.CHP 33pF 50V B
C408 UR866100 C.EL 1uF 50V AB C830 US064100 C.CE.CHP 0.01uF 50V B
C409 UU249470 C.EL 4700uF 25V C831 US063100 C.CE.CHP 1000pF 50V B
C410 UU249330 C.EL 3300uF 25V C832 US135100 C.CE.CHP 0.1uF 16V
* C411 UU239470 C.EL 4700uF 16V AB C833 US064100 C.CE.CHP 0.01uF 50V B
C412 US064100 C.CE.CHP 0.01uF 50V B AB C834 US135100 C.CE.CHP 0.1uF 16V
C413 WJ611400 C.MYLAR 0.1uF 100V J CV C835 US064100 C.CE.CHP 0.01uF 50V B
C413 WQ209700 C.PP 0.027uF 100V TKABGL C851-853 US064100 C.CE.CHP 0.01uF 50V B
C414 WJ611400 C.MYLAR 0.1uF 100V J CV D1-2 VT332900 DIODE 1SS355
C414 WQ209700 C.PP 0.027uF 100V TKABGL * D3 WS696400 DIODE.ZENR HZU9.1B2 TRF-E
C415 VR324900 C.MYLAR 0.1uF 100V AB D4 VT332900 DIODE 1SS355
C501-502 UR237100 C.EL 10uF 16V D5 V4756800 DIODE.BRG S1NB60 1A 600V
C517-518 WK041800 C.EL 10uF 16V D6 VT332900 DIODE 1SS355
C519 WN164200 C.PP 220pF 100V * D7 V8045400 DIODE.ZENR HZU3.0B1 TRF-E
C520 WE100400 C.PP 47pF 630V D9 WA653100 DIODE.BRG KBP103G 1A 200V
C521-522 WE100500 C.PP 100pF 630V * D11 WS695200 DIODE.ZENR HZU6.8B2 TRF-E
C523 WE100400 C.PP 47pF 630V * D12 V2425200 DIODE.ZENR HZU10B2
C525-526 WE102100 C.PP 2200pF 100V D13 VT332900 DIODE 1SS355
C527-528 UR068100 C.EL 100uF 50V D14 V4756800 DIODE.BRG S1NB60 1A 600V
C529-530 WE100200 C.PP 22pF 630V D51 VG437400 DIODE.ZENR MTZJ5.1B 5.1V
C532 WE100600 C.PP 120pF 630V D52-55 VT332900 DIODE 1SS355
C533 UR297220 C.EL 22uF 100V D401-402 VG439000 DIODE.ZENR MTZJ8.2C 8.2V
C534-535 WE100600 C.PP 120pF 630V D403 WA653100 DIODE.BRG KBP103G 1A 200V
C536 UR297220 C.EL 22uF 100V D404 WU011800 DIODE.BRG S2VB60 2A 600V AB
C537 WE100600 C.PP 120pF 630V * D405 WS691800 DIODE.ZENR HZU2.7B2 TRF-E AB
C539 UR067470 C.EL 47uF 50V D503-508 VD631600 DIODE 1SS133,176
C542-543 UR066470 C.EL 4.7uF 50V D509-510 VG437500 DIODE.ZENR MTZJ5.1C 5.1V
C544-545 WQ209700 C.PP 0.027uF 100V D511-512 VH282500 DIODE RLS245
C546 UR066470 C.EL 4.7uF 50V D513 VG440300 DIODE.ZENR MTZJ12C 12V
* C547-548 UR097330 C.EL 33uF 100V D514 VG443000 DIODE.ZENR 27.0V
C549 UR067470 C.EL 47uF 50V D515 VG440300 DIODE.ZENR MTZJ12C 12V
C550 UR218100 C.EL 100uF 6.3V D516 VU264200 DIODE 1SR139,400
* C551-552 WT518500 C.EL 5600uF 50V D517 VN953300 DIODE.BRG D5SBA60 5A 600V
C554-555 WJ605800 C.MYLAR 0.047uF 50V J CV D518-521 VT332900 DIODE 1SS355
C557-560 WN165500 C.PP 0.022uF 100V D801-802 VV220700 DIODE.SHOT RB501V-40
C561-562 WN165300 C.PP 0.01uF 100V D803 WP947300 LED ORANGE/GREEN
C564 UR066100 C.EL 1uF 50V D804 VR711500 LED(or) SLR-325DC
C565 UR067100 C.EL 10uF 50V D805 VR711400 LED(gr) SLR-325MC BG
C566-567 UR068100 C.EL 100uF 50V * D806 WS694400 DIODE.ZENR HZU5.6B2 TRF-E
C570 US135100 C.CE.CHP 0.1uF 16V D807 WG760400 LED SELK6E10C BLUE
C801 US064100 C.CE.CHP 0.01uF 50V B D808-809 VT332900 DIODE 1SS355
C802 US135100 C.CE.CHP 0.1uF 16V * D810 WS693600 DIODE.ZENR HZU4.7B2 TRF-E
C803 US064100 C.CE.CHP 0.01uF 50V B D811-816 VT332900 DIODE 1SS355
* C804-805 VR326200 C.MYLA.CHP 0.01uF 16V D817-818 VD631600 DIODE 1SS133,176
C806 US135100 C.CE.CHP 0.1uF 16V F1 WB220900 FUSE T3.5A 125V CV
C807-809 US061330 C.CE.CHP 33pF 50V B F1 KB000750 FUSE.MNI T2A 250V TKABGL
C810 UM397100 C.EL 10uF 16V G502 V5995800 PLATE.GND
74
R-840/NS-BP300
P.C.B. MAIN and P.C.B. DAB Carbon Resistors

Ref No. Part No. Description Markets Ref No. Part No. Description Markets Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No.
IC1 X6143A00 IC NJM2388F05 5.0V R568-569 HV753470 R.CAR.FP 4.7Ω 1/4W 1.0 Ω HJ35 3100 HF85 3100 11 kΩ HF45 7110 HF45 7110
IC2-3 WP388200 PHOT.CPL TLP781(D4-GR,F) R571-572 HV755220 R.CAR.FP 220Ω 1/4W 1.8 Ω HJ35 3180 ✻ 12 kΩ HJ35 7120 HF85 7120
IC4 iG001180 IC TC4013BP FF R574-577 HV753470 R.CAR.FP 4.7Ω 1/4W 2.2 Ω HJ35 3220 HF85 3220 13 kΩ HF45 7130 HF45 7130
IC51 XF494A00 IC LB1641 R578-579 V3873200 R.CEMENT 0.22Ω 3W 3.3 Ω HJ35 3330 HF85 3330 15 kΩ HF45 7150 HF45 7150
IC402 X6248A00 IC NJM2388F33 AB R592-593 V8070300 R.MTL.FLM 10Ω 1W 4.7 Ω HJ35 3470 HF85 3470 18 kΩ HF45 7180 HF45 7180
IC501 X0515B00 IC LM61CIZ THERMAL R598 HV755100 R.CAR.FP 100Ω 1/4W 5.6 Ω HJ35 3560 HF85 3560 22 kΩ HF45 7220 HF45 7220
IC503 X7974A00 IC KIA7809API-U/P R599 HL006180 R.MTL.OXD 1.8KΩ 1/2W 10 Ω HF45 4100 HF45 4100 24 kΩ HF45 7240 HF45 7240
JK801 VY810500 JACK.MNI HTJ-035-18ABG R601 V8070000 R.MTL.FLM 1Ω 1W 15 Ω HJ35 4150 HF85 4150 27 kΩ HJ35 7270 HF85 7270
Q1 iC1815I0 TR 2SC1815 Y R605 V8071200 R.MTL.OXD 330Ω 1W J 22 Ω HF45 4220 HF45 4220 30 kΩ HF45 7300 HF45 7300
Q2 VV655700 TR.DGT DTC144EKA R613-616 HV753220 R.CAR.FP 2.2Ω 1/4W 27 Ω HJ35 4270 HF85 4270 33 kΩ HF45 7330 HF45 7330
Q3 iC1815I0 TR 2SC1815 Y R620-621 HV753470 R.CAR.FP 4.7Ω 1/4W 33 Ω HF45 4330 HF45 4330 36 kΩ HF45 7360 HF45 7360
Q5 WC741200 FET 2SK3850 RY1 V0073400 RELAY DC DG12D1-OM-II 39 Ω HJ35 4470 HF85 4390 39 kΩ HF45 7390 HF45 7390
Q401 WF691400 TR 2SD2014 RY501 WM959000 RELAY DC24V G5PA-28-MC 47 Ω HF45 4470 HF45 4470 47 kΩ HF45 7470 HF45 7470
Q402 WF691300 TR 2SB1257 ST1 V4040500 SCR.TERM M3
56 Ω HF45 4560 HF45 4560 51 kΩ HF45 7510 HF45 7510
Q403-404 iE102620 FET 2SK246 Y ST501 V4040500 SCR.TERM M3
68 Ω HF45 4680 HF45 4680 56 kΩ HF45 7560 HF45 7560
Q405-407 VV556400 TR 2SC2412K Q,R,S AB ST502 WA246200 SCR.TERM 3.5
75 Ω HF45 4750 HF45 4750 62 kΩ HF45 7620 HF45 7620
Q507-508 VD303700 TR 2SC3326 A,B SW801 WH251700 SW.RT.ENC XREB12105PVB20FINA
82 Ω HF45 4820 HF45 4820 68 kΩ HF45 7680 HF45 7680
Q509 WH199400 IC HN4C06J SW802-805 WD483100 SW.TACT SKRGAAD010
91 Ω HF45 4910 HF45 4910 82 kΩ HF45 7820 HF45 7820
Q510-511 WC139600 TR KTC3911S GR BL * T1 YC073A00 TRANS.PWR CV
100 Ω HF45 5100 HF45 5100 91 kΩ HF45 7910 HF45 7910
Q512 WH199400 IC HN4C06J T1 X7035A00 TRANS.PWR TKABGL
* Q513-514 WT676000 TR 2SD2705S TE501 WQ479300 TERM.SP 4P MST-214V2-01 CTAV 110 Ω HJ35 5110 HF85 5110 100 kΩ HF45 8100 HF45 8100
Q515 VE198700 TR 2SA1145 O,Y TE501 WQ479400 TERM.SP 4P MST-214V2-01 KBGL 120 Ω HF45 5120 HF45 5120 110 kΩ HF45 8110 HF45 8110
Q516-517 VR325600 TR 2SC2229 O,Y U801 WK918500 L.DTCT GP1UE271RKVF 150 Ω HF45 5150 HF45 5150 120 kΩ HF45 8120 HF45 8120
Q518 VE198700 TR 2SA1145 O,Y V801 WQ551300 FL.DSPLY 12-ST-73GINK 160 Ω HJ35 5160 ✻ 130 kΩ HF45 8130 ✻
Q519 V4096100 TR 2SC4614 S,T VR51 WK707400 VR.MOTOR B 10KΩ 180 Ω HF45 5180 HF45 5180 150 kΩ HF45 8150 HF45 8150
Q520-521 V4096000 TR 2SA1770 S,T * VR851-853 WS395700 VR B 10KΩ 200 Ω HF45 5200 HF45 5200 180 kΩ HF45 8180 HF45 8180
Q522 V4096100 TR 2SC4614 S,T WQ150000 SHEET.FL 220 Ω HF45 5220 HF45 5220 220 kΩ HJ35 8220 HF85 8220
Q524-525 VR355800 TR.PAIR A1694/C4467 OPY (IX615750/IX615760) V6203300 SPACER.FL 270 Ω HF45 5270 HF45 5270 270 kΩ HF45 8270 HF45 8270
Q527 VP872700 TR 2SC4488 S,T WE774400 SCR.BND.HD 3x8 MFZN2B3 330 Ω HF45 5330 HF45 5330 300 kΩ HF45 8300 HF45 8300
Q528-529 WH372100 TR KTA1517S GR TP 390 Ω HF45 5390 HF45 5390 330 kΩ HF45 8330 HF45 8330
Q530-531 WC139600 TR KTC3911S GR BL 430 Ω HF45 5430 HF45 5430 390 kΩ HJ35 8390 HF85 8390
Q532 iC1815I0 TR 2SC1815 Y 470 Ω HF45 5470 HF45 5470 470 kΩ HF45 8470 HF45 8470
Q533-534 WC139600 TR KTC3911S GR BL WR343800 P.C.B. DAB AB 510 Ω HF45 5510 HF45 5510 560 kΩ HJ35 8560 HF85 8560
Q803-804 VV556400 TR 2SC2412K Q,R,S CB901 WR261900 TERM 30P TE AB 560 Ω HF45 5560 HF45 5560 680 kΩ HJ35 8680 HF85 8680
Q807 VV655700 TR.DGT DTC144EKA CB902 VM859600 CN.BS.PIN 15P AB 680 Ω HF45 5680 HF45 5680 820 kΩ HJ35 8820 HF85 8820
Q810 VV655700 TR.DGT DTC144EKA BG C901 UR818470 C.EL 470uF 6.3V AB 820 Ω HF45 5820 HF45 5820 1.0 MΩ HF45 9100 HF45 9100
Q811 VV556400 TR 2SC2412K Q,R,S C902 US135100 C.CE.CHP 0.1uF 16V AB 910 Ω HF45 5910 HF45 5910 1.2 MΩ HJ35 9120 ✻
Q812 VV655700 TR.DGT DTC144EKA C903-904 US046100 C.CE.CHP 1uF 25V AB
1.0 kΩ HF45 6100 HF45 6100 1.5 MΩ HJ35 9150 HF85 9150
R2 HV753220 R.CAR.FP 2.2Ω 1/4W C905 UR818470 C.EL 470uF 6.3V AB
1.2 kΩ HF45 6120 HF45 6120 1.8 MΩ HJ35 9180 HF85 9180
R51 HV754100 R.CAR.FP 10Ω 1/4W C908-909 US135100 C.CE.CHP 0.1uF 16V AB
1.5 kΩ HF45 6150 HF45 6150 2.2 MΩ HJ35 9220 HF85 9220
R52 HV753220 R.CAR.FP 2.2Ω 1/4W IC901 X9321A00 IC PQ012GN01ZPH AB
1.8 kΩ HF45 6180 HF45 6180 3.3 MΩ HJ35 9330 HF85 9330
R401 HV753100 R.CAR.FP 1Ω 1/4W
2.0 kΩ HJ35 6200 HF85 6200 3.9 MΩ HJ35 9390 ✻
R404 HV753100 R.CAR.FP 1Ω 1/4W
2.2 kΩ HF45 6220 HF45 6220 4.7 MΩ HJ35 9470 HF85 9470
R406-407 HV755100 R.CAR.FP 100Ω 1/4W
R408-409 HV753470 R.CAR.FP 4.7Ω 1/4W 2.4 kΩ HJ35 6240 HF85 6240
* R531 WK771200 R.CAR 2.2Ω 1/2W 2.7 kΩ HF45 6270 HF45 6270
* R544-545 WQ965300 R.MTL.OXD 1.8KΩ 1W 3.0 kΩ HF45 6300 HF45 6300

1/4W Type
R546-547 WN462200 R.MTL.OXD 33KΩ 1W 3.3 kΩ HF45 6330 HF45 6330
HF45
R548-549 WQ964700 R.MTL.OXD 470Ω 1W 3.6 kΩ HJ35 6360 HF85 6360
1/4W Type 1/6W Type
* R550-551 V8073200 R.MTL.OXD 470KΩ 1W 3.9 kΩ HF45 6390 HF45 6390 HJ35 HF85
R556 HL006270 R.MTL.OXD 2.7KΩ 1/2W 4.7 kΩ HF45 6470 HF45 6470 10mm
5mm
R557 HL005330 R.MTL.OXD 330Ω 1/2W 5.1 kΩ HF45 6510 HF45 6510
R558-559 HL005820 R.MTL.OXD 820Ω 1/2W 5.6 kΩ HF45 6560 HF45 6560
R560 HL005330 R.MTL.OXD 330Ω 1/2W 6.8 kΩ HF45 6680 HF45 6680
R561 HL006270 R.MTL.OXD 2.7KΩ 1/2W 8.2 kΩ HF45 6820 HF45 6820
R562-563 HL006100 R.MTL.OXD 1KΩ 1/2W 9.1 kΩ HF45 6910 HF45 6910
R564-567 HV755100 R.CAR.FP 100Ω 1/4W 10 kΩ HF45 7100 HF45 7100
✻ New Parts ✻ New Parts ❊ : Not available
75
A B C D E F G H I J
R-840/NS-BP300
R-840
1 L model 3-107 11
• OVERALL ASS'Y 12
3-102 3-107
141
141
3-120
3-101
2 141
G model 2-112
2-1 (2)
141 3-106 141
150
3-103
103
141
3-121
145
3-105 2-102
2-106
22
3 146 2-102 2-112
3-104 2-1 (4)
3-1-2
2-1 (8)
144
1-10 2-113 15
150 1-116
3-110 2-1 (3) 1-119 2-1 (7)
3-111 1-102
3-111
4
1-107 1-105
2-1 (6) 3-1-1
2-112 2-105 2-1 (1) 2-111
1-101 1-116
142 2-105 146
146
1-116 120
2-110
10 120
145 160
2-1 (5)
5 112
143
1-103 142 2-107
1-104 120
113
160
144
1-106 144
141
A, B models
111 160 68
141
6
143 110 14
17 68
4
144
110
7 141
144
76
R-840/NS-BP300
R-840
Ref No. Part No. Description Remarks Markets Ref No. Part No. Description Remarks Markets
* 1-10 WS600800 FLEXIBLE FLAT CABLE 22P 160mm P=1.25 3-111 WF002600 PW HEAD B-TIGHT SCREW 3x8 MFZN2W3
* 1-101 WR981000 FRONT PANEL BL CTKGLV * 3-120 WT683900 DAMPER 17x130x5 L
* 1-101 WR980900 FRONT PANEL SI CTKGLV * 3-121 WT806500 DAMPER 30x100x2 G
* 1-101 WS545000 FRONT PANEL BL AB * 4 WR343800 P.C.B. ASS'Y DAB AB
* 1-101 WS544900 FRONT PANEL SI AB * 10 YC115A00 POWER TRANSFORMER CV
* 1-102 WS027800 SUB PANEL BL * 10 YC116A00 POWER TRANSFORMER TK
* 1-102 WS027700 SUB PANEL SI * 10 YC117A00 POWER TRANSFORMER A
* 1-103 WR981100 BUTTON PURE DIRECT * 10 YC119A00 POWER TRANSFORMER B
* 1-104 WS102500 SHEET WINDOW CTKALV * 10 YC120A00 POWER TRANSFORMER G
* 1-104 WR988700 SHEET WINDOW BG * 10 YC118A00 POWER TRANSFORMER L
* 1-105 WR947500 ESCUTCHEON D12x3 BL 11 WB120500 POWER CABLE 2m C
* 1-105 WR947400 ESCUTCHEON D12x3 SI 11 WB120600 POWER CABLE 2m T
* 1-106 WR950300 ESCUTCHEON D8x4 BL 11 WC753000 POWER CABLE 2m K
* 1-106 WR950200 ESCUTCHEON D8x4 SI 11 WC743700 POWER CABLE 2m A
* 1-107 WR951100 LED LENS 11 WB212200 POWER CABLE 2m B
1-116 WE774800 BIND HEAD P-TIGHT SCREW 3x8 MFZN2W3 11 WB212300 POWER CABLE 2m GL
1-119 WQ488500 CUSHION 10x20 11 WC992700 POWER CABLE 2m V
* 2-1 WS535400 P.C.B. ASS'Y MAIN CV 12 V2438700 CORD STOPPER 10P1
* 2-1 WS535500 P.C.B. ASS'Y MAIN T * 14 WQ273900 FLEXIBLE FLAT CABLE 15P 120mm P=1.25 AB
* 2-1 WS535600 P.C.B. ASS'Y MAIN K * 15 WQ273000 FLEXIBLE FLAT CABLE 11P 70mm P=1.25
* 2-1 WS535700 P.C.B. ASS'Y MAIN A * 17 WR292600 DAB MODULE VENICE 5.1 FS2025B AB
* 2-1 WS535800 P.C.B. ASS'Y MAIN B * 22 WS547000 FM TUNER FAEH06-A02N CTLV
* 2-1 WS535900 P.C.B. ASS'Y MAIN G * 22 WS547100 FM TUNER FAEH06-E02N KABG
* 2-1 WS536000 P.C.B. ASS'Y MAIN L 68 WG205000 NUT 3/8 UNEF-32 AB
* 2-102 WR939800 SUPPORT TR * 103 WS080200 REAR PANEL C
2-105 WE807300 RADIATION SHEET 19x24 * 103 WS080400 REAR PANEL T
2-106 VP922500 DAMPER 2x10x170 * 103 WS080500 REAR PANEL K
* 2-107 WS765400 DAMPER 6x14x10 * 103 WS080300 REAR PANEL A
2-110 VQ368600 PUSH RIVET P3555-B * 103 WS080800 REAR PANEL B
2-111 WH010900 SCREW IC 3x20 MFZN2W3 * 103 WS003800 REAR PANEL G
2-112 WG959600 PW HEAD TAPPING B-T. SCREW 3x6-8 MFZN2W3 * 103 WS080700 REAR PANEL V
2-113 WE774300 BIND HEAD B-TIGHT SCREW 3x8 MFZN2W3 * 103 WS080600 REAR PANEL L
* 3-1-1 WU734600 P.C.B. ASS'Y FUNCTION(1) C 110 V3688500 LEG D18/22 t=8.2
* 3-1-1 WU735000 P.C.B. ASS'Y FUNCTION(1) TK * 111 WR986300 KNOB VOLUME BL
* 3-1-1 WU734400 P.C.B. ASS'Y FUNCTION(1) A * 111 WR986200 KNOB VOLUME SI
* 3-1-1 WU734500 P.C.B. ASS'Y FUNCTION(1) B * 112 WR986500 KNOB INPUT BL
* 3-1-1 WU734700 P.C.B. ASS'Y FUNCTION(1) G * 112 WR986400 KNOB INPUT SI
* 3-1-1 WU734900 P.C.B. ASS'Y FUNCTION(1) L * 113 WR987400 KNOB TONE CONTROL BL
* 3-1-1 WU735100 P.C.B. ASS'Y FUNCTION(1) V * 113 WR987300 KNOB TONE CONTROL SI
* 3-1-2 WU734800 P.C.B. ASS'Y FUNCTION(2) * 120 WR927400 SUPPORT H10
* 3-101 WS064400 TOP COVER BL 141 WE774100 BIND HEAD BONDING B-T. SCREW 3x8 MFZN2B3
* 3-101 WS064300 TOP COVER SI 142 WE774300 BIND HEAD B-TIGHT SCREW 3x8 MFZN2W3
* 3-102 WS065300 BASE DOCK BL * 143 WS092400 BIND HEAD S-TIGHT SCREW 3x6 MFZN2W3
* 3-102 WS065200 BASE DOCK SI 144 WG959600 PW HEAD TAPPING B-T. SCREW 3x6-8 MFZN2W3
* 3-103 WR246500 SPRING HOOK BL 145 WH010900 SCREW IC 3x20 MFZN2W3
3-103 WP232500 SPRING HOOK SI 146 WF821300 BIND HEAD S-TIGHT SCREW 4x7 MFZN2W3
* 3-104 WR246600 SUPPORT CONNECTOR BL 150 WE977900 PW HEAD B-TIGHT SCREW 3x6-8 MFZN2B3 BL
3-104 WP232600 SUPPORT CONNECTOR SI 150 WG959600 PW HEAD TAPPING B-T. SCREW 3x6-8 MFZN2W3 SI
* 3-105 WS065600 BUTTON iPod BL 160 WQ488500 CUSHION 10x20
* 3-105 WS065500 BUTTON iPod SI
* 3-106 WS575400 SHEET TOP SERVICE TOOL
3-107 WJ053800 RIVET TOP AAX77610 RS232C CONVERSION ADAPTOR 5Vtype with FFC(9P) RXN600ADAPTER
3-110 WF267600 BIND HEAD P-TIGHT SCREW 2x6 MFZN2B3
77
A B C D E F G H I J
R-840/NS-BP300
R-840
1
• ACCESSORIES
Ref No. Part No. Description Remarks Markets
ACCESSORIES for R-840
202 V6267000 INDOOR FM ANTENNA 1.4m 1pc CTLV
202 VQ147100 INDOOR FM ANTENNA 1.4m 1pc KABG
202 C, T, L, V models 202 K, A, B, G models 203 A, B models 203 WK830700 DAB WIRE ANTENNA 1.6m 1pc AB
204 WQ850900 DOCK COVER 1pc BL
2 204 WQ850800 DOCK COVER 1pc SI
ACCESSORIES for MCR-940/MCR-840/MCR-640

* 210 WS408600 REMOTE CONTROL for MCR-940 000-213200130 BGF
* 210 WS408400 REMOTE CONTROL for MCR-840 000-213200150 CTKALV
* 210 WS408500 REMOTE CONTROL for MCR-840 000-213200120 GF
* 210 WS408200 REMOTE CONTROL for MCR-640 000-213200140 CLV
* 210 WS408300 REMOTE CONTROL for MCR-640 000-213200110 BG
204 210-1 AAX82380 BATTERY COVER CG-2209
212 VY952200 AUDIO PIN CABLE 2P 1.0m 1pc
3
213 WG299500 VIDEO PIN CABLE 1P 1.5m 1pc
* 214 WQ579900 SYSTEM CONTROL CABLE 8P 0.6m 1pc
* 215 WQ866500 USB CAP 1pc BL
* 215 WQ866400 USB CAP 1pc SI
BATTERY R03,AAA,UM-4 2pcs
210 212 213
214
210-1
215 USB
7
✻ New Parts
78
A B C D E F G H I J
R-840/NS-BP300
NS-BP300
1
• OVERALL ASS'Y
NETWORK diagram Ref No. Part No. Description Remarks Markets
Yellow * 1 WS572000 CABINET ASS'Y WH
* 1 WS499700 CABINET ASS'Y PN
L13
0.1mH
TWEETER
* 1-16 WT871200 PACKING 4x480
R11 C12 C13
* 2 WS499800 FRONT GRILLE ASS'Y
Black
Black 3.3ohms/5W 6.8uF/63V 5.6uF/63V Black * 4 YC053A00 DRIVER TWEETER 2.5cm 5Ω JA05I8
L12 6-1 * 5 YC054A00 DRIVER WOOFER 13cm 6Ω JA1395
2 INPUT
0.1mH
TERMINAL
C11
WOOFER
6-1-C11 * 6-1 WS500000 P.C.B. ASS'Y NETWORK
Yellow
L11 5.6uF/100V 6-11 6-1-C11 V9930800 ELECTROLYTIC CAPACITOR 5.6uF 100V C11
1mH
Red
* 6-1-C12 WP588000 ELECTROLYTIC CAPACITOR 6.8uF 63V C12
6-1-C13 WP587900 ELECTROLYTIC CAPACITOR 5.6uF 63V C13
* 6-1-R11 WU191100 CEMENT RESISTOR 3.3Ω 5W R11
6-11 * 6-5 WS494900 SPEAKER TERMINAL
6-1-C13 6-11 WE774800 BIND HEAD P-TIGHT SCREW 3x8 MFZN2W3
* 7 WS498700 LEG D16 t7.9
6-1-R11 6-1-C12 21 WF824200 HEXAGON HEAD WOOD SCREW 4x25 MFZN2B3
3 4
22 22 WE963200 FLAT HEAD WOOD SCREW 3.5x20 MFZN2B3
6-5
ACCESSORY
21 1
200 WQ102500 SPEAKER CABLE 2m 1pc
22
21
1-16
7 21
6
200
21
7
✻ New Parts
79
A B C D E F G H I J
R-840/NS-BP300
1 ■ REMOTE CONTROL
SCHEMATIC DIAGRAM KEY LAYOUT KEY CODE
These PADs are test point for ISP in the production line. Key BD DVD CD
Key Name Category Code
VCC Revision history: No. (MCR-940) (MCR-840) (MCR-640)
1 System 78-0F ● ● ●
R3
3 Disc 78-00 ● ● ●
K25
5 MENU iPod 7F01-0FF0 ● ● ●
D1
10 ohms C1 C2 1 3 7 iPod 7F01-0EF1 ● ● ●
IR_DIODE 8 iPod 7F01-1BE4 ● ● ●
47uF 0.1uF K15 K13
9 ENTER iPod 7F01-11EE ● ● ●
R1 Option 5 7 10 iPod 7F01-1CE3 ● ● ●
1 ohm K31 K27 K26 K30 K29 K28 D3 D5 D6 13 iPod 7F01-1EE1 ● ● ●
2 15 iPod 7F01-14EB ● ● ●
DAN202K
DAN202K
DAN202K
Q1
R2 8 9 10 16 iPod Input select 78-D0 ● ● ●
K80 K84 K83 K79 K82 K81 K78
47 ohms VDD 18 SHUFFLE iPod 78-07 ● ● ●
E2
U1 K76 K72 K71 K75 K70 K77 K74 13 15 19 REPEAT iPod 78-0C ● ● ●
M34286G2GP DISC ● ●
VSS 20 Input select 78-4A
1
VSS VDD
20 CD ●
K64 K68 K67 K63 K66 K65 K62
2 19 16 18 19 21
AUX Input select 78-49 ●
E2 CARR
XIN USB Input select 78-29 ● ●
3 18
E1 D0 K69 K73 K61 K60 K59 K58 22 AUX Input select 78-49 ● ●
4
XIN D1
17 20 21 22 23 23 TUNER Input select 78-4B ● ●
5
XOUT D2
16 K7 K10 K9 K5 K8 K3 K1 25 MEMORY Tuner 78-B2 ● ●
6 15 25 26 27 26 PRESET Tuner 78-1B ● ●
E0 D3 27 TUNING Tuner 78-AA ● ●
K47 K50 K45 K49 K52 K54 K48
7 14
G0 D4 28 TP (B, G, E, F models) Tuner 78-81 ● ●
X1 8 13 28 29 30 31 29 MONO Tuner 78-B7 ● ●
G1 D5 K37 K36 K39
4.00MHz 30 PRESET Tuner 78-1C ● ●
3 9
G2 D6
12
Option
10 11
31 TUNING Tuner 78-A9 ● ●
K19 K18 K22 K21 K20 K23 K16
G3 D7 D2 D4 32 DISPLAY System 78-4E ● ●
32 33 34 35 33 TIMER System 78-A0 ● ●
34 SLEEP System 78-4F ● ●
DAN202K DAN202K
36 37 39 35 DIMMER System 78-BA ● ●
no use OPTION 78-2B ● ●
36 System
DISPLAY 78-4E ●
G1 G0 E0
40 41 42 43 37 OPTION System 78-2B ●
39 PURE DIRECT System 78-50 ●
40 A (Red) Disc 7C-E9 ●
41 B (Green) Disc 7C-EA ●
44 46
45 42 C (Yellow) Disc 7C-EC ●
47 43 D (Blue) Disc 7C-EB ●
PANELS TOP MENU/TITLE LIST ●
44 Disc 7C-B1
4 48 49 50 TOP MENU ●
MCR-940 MCR-840 MCR-640 45 System 7C-B4 ● ● ●
(B, G, F models) (C, T, K, A, L, V models) (G, F models) (C, L, V models) (B, G models) POP UP MENU ●
54 46 Disc 7C-B2
52 MENU ●
51 53 47 VOLUME + System 78-1E ● ● ●
48 System 7C-B5 ● ● ●
49 ENTER System 7C-B8 ● ● ●
50 System 7C-B6 ● ● ●
EXIT 7C-C0 ●
58 59 60 61 51 Disc
SETUP 7C-AC ●
52 System 7C-B3 ● ● ●
62 63 64 65 53 RETURN Disc 7C-B7 ● ●
54 VOLUME - System 78-1F ● ● ●
58 Disc 7C-85 ● ● ●
66 67 68 69 59 Disc 7C-83 ● ● ●
5 60 Disc 7C-82 ● ● ●
70 71 72 73 61 MUTE System 78-9C ● ● ●
62 Disc 7C-86 ● ● ●
63 Disc 7C-87 ● ● ●
74 75 76 77 64 Disc 7C-B9 ● ● ●
65 Disc 7C-BA ● ● ●
66 1 Disc 7C-94 ● ● ●
78 79 80 81 67 2 Disc 7C-95 ● ● ●
68 3 Disc 7C-96 ● ● ●
Key colors 82 83 84 69 4 Disc 7C-97 ● ● ●
70 5 Disc 7C-98 ● ● ●
A. Red 71 6 Disc 7C-99 ● ● ●
B. Green 72 7 Disc 7C-9A ● ● ●
73 8 Disc 7C-9B ● ● ●
C. Yellow 74 9 Disc 7C-9C ● ● ●
6 D. Blue 75 0 Disc 7C-93 ● ● ●
76 ENTER Disc 7C-B8 ● ● ●
77 CLEAR Disc 7C-9F ● ● ●
AUDIO 7C-AD ● ●
78 Disc
PROGRAM 7C-A0 ●
SUBTITLE 7C-AA ● ●
79 Disc
RANDOM 7C-A1 ●
ANGLE 7C-AE ● ●
80 Disc
REPEAT 7C-A3 ●
ON SCREEN 7C-A6 ●
81 ZOOM Disc 7C-D7 ●
A–B 7C-A4 ●
P in P 7C-ED ●
Disc
82 RANDOM 7C-A1 ●
TIMER System 78-A0 ●
7 REPEAT Disc 7C-A3 ● ●
83
SLEEP System 78-4F ●
SETUP 7C-AC ●
Disc
84 ON SCREEN 7C-A6 ●
DIMMER System 78-BA ●
80
R-840/NS-BP300
■ SYSTEM CONNECTOR
● Connections
Connect the SYSTEM CONNECTOR (TO: PLAYER) of the R-840 to the SYSTEM CONNECTOR (TO: RECEIVER) of the
player with the system control cable.
System control cable

Receiver (R-840) Player (Example: BD-940)
R-840/NS-BP300
● Specifications
SYSTEM CONNECTOR
8 7 6
5 4 3
2 1
9
RECEIVER PLAYER
SYSTEM CONNECTOR R-840 BD-940 / DVD-840 / CD-640
Microprocessor: IC101 Microprocessor: IC204 / IC113 / IC501
Pin no.
Pin no. Function Port type Terminal name Pin no. Port type Terminal name
940 840 640
1 Message R-840 to player SO SYS_MOSI 77 SI SYS_MOSI 33 32
2 Message player to R-840 IRQ SYS_PL_EN 75 SO SYS_PL_EN 35 –
SYS_POW_DET – 24
3 Message R-840 to player O SYS_RE_EN 76 SI SYS_RE_EN 2 20
4 Message player to R-840 SI SYS_MISO 78 O SYS_MISO 34 31
5 Message R-840 to CD-640 – PLAYER_S10 – +10EX
6 No connected
7 No connected
8 No connected
9 GND Chassis AGND Chassis AGND
81
R-840/NS-BP300
● Operation
Example
User RECEIVER PLAYER

R-840/NS-BP300
AC OFF AC OFF
AC connect AC connect
Reset Start Reset Start
Communication permission (Low -> Hi)
Communication permission (Low -> Hi)
Communication start
Acknowledgement
State notification
Acknowledgement
Mode setting (STANDBY)

Acknowledgement
Remote control " " (On/Standby) Key

Wake Up Communication sign (Low pulse)
Wake Up
Mode setting (DISC MODE)

Power On Acknowledgement
Input Disc Power On
State notification (Power On Wait)
Acknowledgement
State notification (Power On)

Acknowledgement
Remote control " " (On/Standby) Key

Mode setting (STANDBY)
Acknowledgement Standby
State notification (Standby Wait)

Acknowledgement
State notification (Standby)

Acknowledgement Standby complete
Standby
82
R-840/NS-BP300
MEMO
R-840/NS-BP300
83
R-840/NS-BP300

Yamaha MCR-840 Service Manual

Uploaded by

Copyright:

Available Formats

Yamaha MCR-840 Service Manual

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Yamaha MCR-840 Service Manual

Uploaded by

Copyright:

Available Formats

MICRO COMPONENT SYSTEM MCR-940/MCR-840/MCR-640

BD-940: 1011 5 4 / DVD-840: 1011 5 5 / CD-640: 1011 5 6

Copyright © 2009 All rights reserved.

WARNING: CHEMICAL CONTENT NOTICE!

About lead free solder

■ REMOTE CONTROL PANELS

Signal to Noise Ratio (IHF)

Harmonic Distortion (1 kHz)

* Specifications are subject to change without notice due to

C .................Canadian model B ......................British model

Manufactured under license from Dolby Laboratories. “Dolby” and the

(3/4") 176 (3/4") (1") (1")

(6-7/8") Unit: mm (inch)

■ INTERNAL VIEW R-840

Top view Top view

1. Removal of Top Cover Unit 2. Removal of Front Panel Unit

Top cover unit

Front panel unit

3. Removal of Amp Unit

7 MAIN (2) P.C.B.

8 9 FUNCTION (1) P.C.B.

MAIN (1) P.C.B.

When checking the P.C.B.s:

Rubber sheet and the cloth

Front panel unit

● Required tools ● Preparation and precautions

• Firmware downloader program • Download the firmware downloader program and

• RS232C conversion adaptor (Part No.: AAX77610)

Note: Do not use the RS232C conversion adaptor

● Confirmation of firmware version

1-1. Firmware version

Serial port (RS232C) Writing port

RS232C conversion adaptor

RS232C cross cable

Select Internal flash memory

Select Internal flash memory

Select the port of RS-232C

4. Click [Refer...] and select the firmware name. (Fig. 3)

When [Refer...] is clicked, the “Open” screen appears.

5. Click [Setting], and set the baud rate. (Fig. 4)

6. Click [E.P.R.], then the “Erase” screen appears. (Fig. 5)

7. Click [OK] to start writing. (Fig. 5)

Writing being executed.

9. Click [Exit] to end FlashSta.exe. (Fig. 6)

MAIN MENU SUB-MENU

● Starting Self-Diagnostic Function

Keys of this unit

“ ” (On/Standby) key “PURE DIRECT” key

● Starting Self-diagnostic function in the protection cancel mode

● Canceling Self-diagnostic function

● Display provided when Self-Diagnostic Function started

When there is no history of protection function:

Opening message After a few seconds Main menu display

When there is a history of protection function:

When there is a history of protection function due to abnormal temperature.

● History of protection function

● Operation procedure of Main menu and Sub-menu

Main menu and Sub-menu selection

Knob of this unit

Menu select Parameter select