Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
112 views

Problems - I Order Systems

1. The document provides solutions to 6 problems related to process instrumentation and control involving liquid level systems. 2. Problem 1 calculates the time constant for a thermometer placed in boiling water. Problem 2 determines the time required for a thermometer to reach 90% of its final temperature. 3. Problem 3 calculates the time for a tank's liquid level to overflow when the outflow rate changes. The remaining problems derive transfer functions for various liquid level systems.

Uploaded by

kindenew
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views

Problems - I Order Systems

1. The document provides solutions to 6 problems related to process instrumentation and control involving liquid level systems. 2. Problem 1 calculates the time constant for a thermometer placed in boiling water. Problem 2 determines the time required for a thermometer to reach 90% of its final temperature. 3. Problem 3 calculates the time for a tank's liquid level to overflow when the outflow rate changes. The remaining problems derive transfer functions for various liquid level systems.

Uploaded by

kindenew
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Programme Name & Branch: B.

Tech Chemical Engineering

Course Title & Code: Process Instrumentation and control & CHE3002
Course Type: EPJ
Slot: L13+L14, L27+L28
Faculty name: Dr.S.Karthika (17025)

Problems – I order systems

1. A thermometer is at a room temperature of 25℃. It is suddenly put into the


vessel containing water at 100℃, what should be the
𝜏 , so that it indicates 99.9℃ in 1 min.

Solution

For step input

Y(t) = A [1- e−t/τ ] + 25

99.9 = 75 [1- e−t/τ ] +25

1- 𝑒 −1/𝜏 = 0.9986.

𝑒 −1/𝜏 = 1.333 × 10−3


1
- = ln (1.333× 10−3 )
τ

𝜏 = 0.151 min 𝑜𝑟 9.06 𝑠𝑒𝑐.


2. A thermometer has a time constant of 15 sec with an initial temperature T
equals 20℃. It is suddenly exposed to a temperature of 100℃. Determine
the time required to attain 90% of the new steady state value.

Solution
𝜏 = 15 sec 𝜏𝑓 = 100℃.

Initial temperature Ti = 20℃

Final temperature = 90% of steady state = [(100-20)*0.9] + 20 = 92℃

y(s) 1
= ⇒ Y (t) = A [1- e−t/τ ]
x(s) τs+1

For the thermometer at the initial temperature of 20℃

Y(t) = A[1- e−t/τ ] + 20

92 = 80[1- e−t/15 ] + 20

⇒ 𝑡 = 34.54 sec

3. A tank having area of 10m2 and height of 10 m has its liquid level at 2 m.
Both the inflow and outflow are 10m3 / min . If outflow is changed to
5 m3 / min. How long it will take before the tank starts overflowing.

Solution
Mass flow rate in – Mass flow rate out = Rate of accumulation of mass

𝑑ℎ
𝑞0 − 𝑞1 = A
𝑑𝑡

𝑑ℎ
10 − 5 = 10
𝑑𝑡

𝑑ℎ 10 t
= 0.5 ⇒ ∫2 dh = ∫0 dt
𝑑𝑡

8 = t (0.5)
⇒ t = 16 min.

4. A tank having a cross sectional area of 2 sqft is operating at steady state with
an inlet flow rate of 2 cubic feet/min. The flow head characteristic is as
shown in the figure. Derive the transfer function H(s)/Q(s). The flow to tank
is increased from 2 to 2.2 cubic feet/min according to step change. Calculate
the level h, 2 min after the change occurs.

Solution

Flow head relation


𝟐.𝟒−𝟏
q-1 = (h-0.3)
𝟏−𝟎.𝟑

The flow head relation

q0 = 2h + 0.4
dh
q − qo = A ----------- 1
dt

dhS
qS − q0S = A ----------- 2
dt

dh
q − 2h − 0.4 = A
dt

dhs
qS − 2hS − 0.4 = A
dt
Ad( h−hS )
( q − qS ) − 2(h − hs ) =
dt

dH
Q – 2H = A
dt

Q(s) – 2 H(s) = A[ sH(s) ]

Q(s) = 2 s H(s) + 2 H(s)

= H(s) [2 s + 2]
H(s) 1
⇒ =
Q(s) 2(s+1)

At steady state, from equation 2


dhS
qS − q0S = A =0
dt

⇒ qS = q0S

⇒ 2hS + 0.4 = 2

⇒ hS = 0.8 ft

Step change A = 2.2 − 2 = 0.2 ft 3 m

Q(t) = A u(t) = 0.2 u(t)


0.2
⇒ Q(s) =
s

0.2 1
H(s) = x
s 2( s+1)

1
= 0.1 ×
( s+1)

Using partial fractions

0.1 A B A( s + 1 ) + BS 0.1
= + ⇒ =
s( s + 1) s s+1 s( s + 1) s( s + 1)

Put s = 0 ⇒ A = 0.1 and Put s = −1 ⇒ − B = 0.1 ⇒ B = −0.1.


0.1 0.1 0.1 1 1
= − = 0.1 [ − ]
s( s + 1) s s+1 s s+1

⇒ H(t) = 0.1[1 − e−t ]

h - hs = 0.1[1 − e−t ]

h = hs + 0.1[1 − e−t ]

If hs = 0.8

then h = 0.886 ft.

5. A liquid level system is operating at steady state and the following


disturbance occurs. At t=0, 1 cubic feet of water is added suddenly to the
tank and at t=1 min, 2 cubic feet of water is added suddenly. What is the
level at t=0.5, t=1 and t=1.5.

Solution

𝐇(𝐬) 𝐑
The transfer function is =
𝐐(𝐬) 𝛕 𝐬+𝟏

Q(t) = δ(t) + 2 δ (t-1) L[δ (t-a)] = 𝐞−𝐚𝐬

Q(s) = 1+ 2 𝐞−𝐬 . 1 = 1+ 2 𝐞−𝐬


R
H(s) = (1+ 2𝐞−𝐬 ).
τ s+1
𝐑 2 𝐞−𝐬 𝐑
⇒ +
𝛕 𝐬+𝟏 𝛕 𝐬+𝟏

R/𝜏 2 𝐞−𝐬 /𝜏 𝑅
⇒ H(s) = 𝟏 + 𝟏
𝐬+𝛕 𝐬+𝛕

−t −t
𝑅 1
H(t) = e 𝜏 + 2R ∙ 𝐞−𝟏 ∙ e𝜏
𝜏 𝜏

−t −(𝐭−𝟏)
𝑅 2R
H(t) = e𝜏 + 𝐞 𝛕 for t > 1 ----------- 1
𝜏 τ

Time constant 𝜏 = 𝐴𝑅 = 1 min

Now, Substitute t = 0.5 min in equation 1


0.5
0.5 −
= e 1
1

= 0.30326

Substitute t = 1 in equation 1

H (t) = 0.5 e−1 = 0.1839 ft

Substitute t = 1.5 in equation 1

H(t) = 0.5 𝐞−𝟏.𝟓 + 0.5 × 2 e−0.5

= 0.718 ft
6. Derive the transfer function H(s) / Q(s), for the liquid level system when (i)
Liquid level is at 1m. (ii) Liquid level is at 3m.
Data given: hs= 1m, qo= 10 m3/ min
A= 1 m2, R= 0.5

Solution

Taking mass balance on tank when h= 1m

dh
q − qo = A ----------- 1
dt

dhS
qS − q0S = A (at steady state) ----------- 2
dt

d(h−hS)
(q − qs ) − (qo − q0S )= A
dt

d(h−hS)
(q − qs ) = A
dt

dH
Q= A
dt

Taking Laplace transform


Q(s) = A [sH(s)]
H(s) 1
=
Q(s) As

Taking mass balance when h=3m,

dhS
q − (qo + qv ) = A ----------- 1
dt

dhS
qS − (qos + qvs ) = A (at steady state) ----------- 2
dt

d(h − hS)
(q − qs ) − (qv − qvS ) = A
dt

dH
Q - QV = A
dt

H
QV =
R

H dH
Q- =A
R dt

Taking Laplace transformation

H(S)
Q(s) – = A[ sH(s) ]
R

H(s) 0.5
=
Q(s) 0.5s(s+1)

You might also like