EN

Opening, Dosing and Sorting Systems,

Mixing and Conditioning Units,
Stationary Shredders
Navigation
4 BRT HARTNER BO 36 BRT HARTNER BS 64 BRT HARTNER EWD
Bag Opener Ballistic Separator Dismantler
8 BRT HARTNER BOS 40 BRT HARTNER BPS 68 BRT HARTNER BD
Bag Opener for small plastic bags Papersorter Bale Dewiring
12 BRT HARTNER BB 44 BRT HARTNER SD 72 BRT HARTNER PS / PD
Bale Breaker Trommel Screen Perforator
48 BRT HARTNER ST
16 BRT HARTNER D Tommel Screen 76 TEUTON ZS 55
Feed and Metering Hopper 52 BRT HARTNER SC Stationary Shredder
20 BRT HARTNER MF Coarse Screen 80 FORUS SES 250
Moving Floor Conveyor 56 BRT HARTNER SF Stationary Two-Shaft Shredder
24 BRT HARTNER DC Fine Screen
Decompactor 60 BRT HARTNER BBS
28 BRT HARTNER DM Air Belt Separator
Digestate Mixer
32 BRT HARTNER DCD
Digestate Conditioner
 Bag Opener
BO
BRT HARTNER BO

› Virtually 100% opening and emptying of the plastic bags

› High opening rate of “bags within bags”
› Suitable for a wide range of material, e.g. packaging material, residual waste, household waste, wastepaper
› Protection against entaglement and wrapping of strings, tapes, wires and foils
› Loosened up and evened out material supply to the sorting process
› Low servicing and maintenance requirements
› Overrange protection and automatic switch-off in case of blockages caused by bulky and and disruptive material
› Large storage hopper for feeding by front-end loader or by gripper

BO 13 BO 17 BO 23

Working width approx. 1.300 mm approx. 1.700 mm approx. 2.300 mm

Hopper length up to 14.000 mm up to 14.000 mm up to 14.000 mm
Hopper volume min. 9 m³ 12 m³ 16 m³
Hopper volume max. 30 m³ 40 m³ 55 m³
Power requirement 17 – 36 kW 22 – 43 kW 28 – 52 kW
Total weight 10 – 16 t 12 – 18 t 16 – 22 t
Opening rate min. 95 % 95 % 95 %
The Bag Opener opens the plastic bags and transfers the metered material to the subsequent sorting and
preparation plants. The machine is available as a standard model or in combination with a charging hopper. Max. throughput with lightweight packaging 10 t/h 13 t/h 20 t/h

The hopper is fed batchwise by a front loader. Max. throughput with MSW / household waste 24 t/h 36 t/h 50 t/h

4 5
 BO

6 7
 Bag Opener for small plastic bags
BOS
BRT HARTNER BOS

The BRT HARTNER BOS opens › Virtually 100% opening and emptying of bags › Low servicing and maintenance requirements
small plastic waste bags and › Low acquisition costs › Space-saving
transfers the materials to › Extremely robust and resistant to wear › Silent machine operating
downstream sorting and › Loosened up and evened out material supply › Slow runner
recovery plants. The BRT HARTNER into the sorting process › Ideal with pre-connected Feed and Metering
BOS is available in basic design. › Ready-to-connect design Hopper of the D-series
In combination with a pre-
connected Feed and Metering
Hopper of the BRT HARTNER
D-series the Bag Opener
will reach its highest efficiency.
BOS 12 BOS 18 BOS 24
The hopper is charged batchwise
Working width 1,200 mm 1,800 mm 2,400 mm
per front-end loader or gripper.
Hopper volume 2.5 m³ 3.6 m³ 4.4 m³
Outer length 2,700 mm 3,300 mm 3,900 mm
Outer width 2,200 mm 2,200 mm 2,200 mm
Power requirement 37 kW 45 kW 55 kW
Total weight 6t 8t 10 t
Opening rate min. 95 % 95 % 95 %
Max. throughput 30 m³/h 45 m³/h 60 m³/h
Max. throughput at 800 kg/m³ 24 t/h 36 t/h 48 t/h

8 9
 BOS

10 11
 Bale Breaker
BB
BRT HARTNER BB

› For PET-bottles, residual waste, plastic containers, waste paper, sorting rests, etc.
› Efficient opening of bales and loosening up of material
› Even and continous material discharge
› Infinitely adjustable throughput rate
› Large bale hopper for long feeding intervals
› Ready-for-operation construction with drives and electrical control system
› High mobility and usability on various sites
› Freely selectable positioning of the lateral plug-in walls

BB

Working width 1,780 mm

The Bale Breaker serves for unraveling of press bales of PET-bottles, waste paper, residual waste, plastic waste Total height 2,500 mm
and similar materials, as well as the metered material transport downstream working processes. By adjusting the Hopper length min. 6,000 mm
unraveling grade, an optimal subsequent sorting is guaranteed.
Total length min. 8,400 mm
Extension in steps of 2,000 mm
The BRT HARTNER BB-series does not crush but loosen the material for a most effective material sorting. The
Total length max. 14,400 mm
bunker walls are designed as plug-in walls. This allows individual wall elements to be removed or added. If
Power requirement Moving Floor 11.5 - 22 kW
required, a supplemented ripping device can be installed for an additional loosening process and opening of tied
bundles and cartons. Weight from 11.5 t
Throughput up to 10 t / h

12 13
BB

14 15
 D
BRT HARTNER D
Feed and Metering Hopper

› For waste paper, household waste, commercial and mixed construction waste, RDF, biowaste, etc.
› Loosened up and even material feeding to sorting and recovery units
› Access to the bunker via maintenance door with safety switch
› Entanglement protection and self-cleaning effect of the dosing drum against strings, long foils, cords and wires
› Large feed hopper for long feeding intervals
› Low maintenance and servicing requirements
› Efficiency boost of as much as 20% compared to common feeding methods
› Ready for operation construction including drives and electrical control system
BRT HARTNER D Feed and Metering Hoppers are designed for continuous and even feeding of most different
materials and are equipped with an electrical volume flow regulation and an BRT HARTNER MF Moving Floor
Conveyor.
D 17 D 23
Preferably, such Feed and Metering Hoppers are employed for feeding in sorting and recovery plants with waste paper, Working width 1,700 mm 2,300 mm
packaging waste, household waste, commercial and mixed construction waste, glass, refuse derived fuel, metals and Number of conveyor slots 12 pieces 16 pieces
electric waste. Fill level 1,900 mm 1,900 mm
Total height 2,500 mm 2,500 mm
The integrated Moving Floor Conveyor serves for material transport to the dosing unit. There, the recyclables are
Extension in steps of 2,000 mm 2,000 mm
loosened up and presented to downstream sorting processes as even and continuous material stream.
Total length max.. 15,800 mm 19,800 mm
Volume 20 - 40 m³ 28 - 73 m³
Optical sensors control the material layer on the discharge belt. The rotational speed of the dosing unit and the
velocity of the moving floor are adjusted accordingly. Power Moving Floor 8 - 33 kW 8 - 33 kW
Weight 10t 11 t

16 17
D

18 19
 MF
BRT HARTNER MF
Moving Floor Conveyor

› Transport of all kinds of material, no matter if featherweight,

heavyweight, wet and sticky or highly abrasive
› Modular design for any required size
› Transport speed infinitely adjustable
› Easy integration into existing material bunkers
› Also available as driveable heavy-duty design
› Without rotating parts, therefore no danger of entangling
› High carrying capacity, safe against impact load
› As required with metering and discharging devices

MF 17 MF 23 MF 29

Working width 1,700 mm 2,300 mm 2,900 mm

BRT HARTNER MF Moving Floor Conveyors can be manufactured in virtually every length and width. Thanks to the design, the units
Number of push boards 12 pieces 16 pieces 20 pieces
can be transported in completely mounted state. All requested hopper capacities with reversible transport directions can be realized.
Each BRT HARTNER MF Moving Floor Conveyor consists of push-boards groups. Each group can be moved independently from the Height Moving Floor approx. 400 mm approx .400 mm approx. 400 mm

others. For transporting of material, all groups are moved in the requested transport direction. Fill level max. 1,800 mm 2,400 mm 3,000 mm
Moving Floor length min. 6,500 mm 6,500 mm 6,500 mm
The material transport is effected by forward and backward moving push-boards. During the following working strokes, the groups Total length min. 8,000 mm 8,000 mm 8,000 mm
are individually withdrawn. The material is held back on the unmoved push-boards. By reversing the transport direction, an optimal Extension in steps of 2,000 mm 2,000 mm 2,000 mm
feeding of the hopper is achieved before the material is being transported to subsequent processes. Power requirement 4 - 22 kW 4 - 22 kW 4 - 22 kW
Weight 5t 6t 7t
Additional equipment, such as sidewalls, completely closed hoppers or metering and discharging devices are available upon request.

20 21
 MF

22 23
 Decompactor
DC
BRT HARTNER DC

DC Feed Hoppers with Decompactor are used in mechanical and biological waste treatment facilities. They are
especially suitable for the intake, buffering and dosing of rotting material, digestates and organic waste.

The system consists of a sturdy feed hopper with a drag chain conveyor and a decompaction unit with two or three
rollers. The rollers loosen up the material and prepare it for even transfer to subsequent plant components.

DC Feed Hoppers with Decompaction Unit consist of a heavy, sturdy and torsion-resistant sheet steel and sectional
steel construction. They are adjusted to the requirements of the input material. It is possible to equip the machine with
a belt conveyor instead of a drag chain conveyor.

DC 14 / 2 DC 18 / 2 DC 18 / 3

Working width 1,400 mm 1,800 mm 1,800 mm

Centre distance 7,250 / 10,000 / 12,750 mm 7,250 / 10,000 / 12,750 mm 7,250 / 10,000 / 12,750 mm
Inclination 0° 0° 0°
Decompactor shafts 2 pieces 2 pieces 3 pieces
Volume hopper 10 – 20 m³ 13 – 25 m³ 20 – 36 m³
Throughput up to 200 m³/h up to 200 m³/h up to 200 m³/h
Power scraping chain up to 1.1 kW up to 1.1 kW up to 1.1 kW
Power decompactor shafts 2 x 7.5 – 15 kW 2 or 3, x 7.5 – 15 kW 3 x 7.5 – 15 kW

24 25
 DC

26 27
 Digestate Mixer
DM
BRT HARTNER DM

aerobic post-treatment of the substrate. BRT HARTNER DM furthermore excels with its high throughput at great
resistance against impurities, which allows for its optimal integration into the automated material flow of a system
as well as into a downstream batch system.

DM 12 DM 20

Useful length/working length approx. 6,400 mm approx. 11,900 mm

Useful width/working width approx. 1,200 mm approx. 2,000 mm
Filling height approx. 1,200 mm approx. 1,700 mm
Filling volume approx. 10 m³ approx. 40 m³
The BRT HARTNER DM Digestate Mixer is a machine used for the optimal production of mixes from digestate, Feeding length approx. 1,500 mm approx. 6,800 mm
sewage sludge and the like on the one hand and structuring materials such as green waste, raw compost and Discharge width approx. 1,200 mm approx. 2,000 mm
screen overflow on the other. The system of mixing the substrates with the aid of mixing rollers in the material Diameter mixing roller approx. 750 mm approx. 1,200 mm
flow effectively prevents compaction or kneading effects and loosens up the substrate. This is of great benefit for Diameter mixing / discharge rollers approx. 610 mm approx. 610 mm
Throughput 36 – 180 m3/h 80 – 250 m³/h

28 29
 DM

30 31
 Digestate Conditioner
DCD
BRT HARTNER DCD

To perfectly pretreat digestate mixtures before the aerobic treatment as well as the thermic drying of the
material, the input substrates are mixed into the dynamic material flow, then homogenized and fluffened up.
The pressure ventilation of the material with pre-heated circulating air and active floor heating of the
closed machine are the basis for an optimized ammoniac and water output through the exhaust air. This exhaust
air is processed by the exhaust air treatment system.

DCD 20 / 125 DCD 20 / 245

Useful length/working length approx. 12,500 mm approx. 24,500 mm

Filling volume approx. 30 m³ approx. 60 m³
Useful width/working width approx. 2,000 mm approx. 2,000 mm
Filling height approx. 1,200 mm approx. 1,200 mm
Throughput 10 - 22 m³/h 10 - 22 m³/h
Treatment time 1.25 - 3 hours 2.5 - 6 hours

32 33
DCD

34 35
 BS
BRT HARTNER BS
Ballistic Separator

BRT HARTNER BSH

The BRT HARTNER BSH is a The BRT HARTNER BSV is designed for heavy applications with commercial waste and mixed construction waste
Ballistic Separator for packaging (single piece weight: < 30 kg). The paddles and sieve screens consist of wear-resistant steel. The lateral sheets at the
and household waste paddles are additionally reinforced. Furthermore, the entire machine frame and the shafts are adapted to the increased
(single piece weight: < 10 kg). requirements. All eccentric bearings are doubled. As opposed to the BSH and BSW versions, both shafts of the BSV are
The paddles and sieve meshes driven by an electric gear motor.
are made of unalloyed
construction steel.

BRT HARTNER BSW

The BRT HARTNER BSW is a
BS 40 BS 45 BS 60 BS 90 BS 120
medium-heavy machine for
Useful width (m) 2,070 mm 2,070 mm 2,770 mm 4,140 mm 5,540 mm
household and commercial
Paddle length (m) 5,080 mm 6,300 mm 6,300 mm 6,300 mm 6,300 mm
waste (single piece weight: < 20
Drive power (kW) 11 kW* 11 kW* 11 kW * 22 kW 22 kW
kg). The reinforced paddles and
sieve meshes are made of wear- Throughput (m³/h)* 40-45 m³/h 45-60 m³/h 60-90 m³/h 90-120 m³/h 120-200 m³/h

resistant steel. This ensures a Sieve area (m²) 10.5 m² 13 m² 17.4 m² 26 m² 34.9 m²

long service life even in Paddle no. 6 6 8 12 16

rough applications. Height (m) - machine frame 1,500 mm 1,500 mm 1,500 mm 1,500 mm 1,500 mm
Length (m) - machine frame 5,800 mm 7,100 mm 7,100 mm 7,100 mm 7,100 mm

*drive power of the BSV version 22 kW

36 37
 BS

38 39
 Papersorter
BPS
BRT HARTNER BPS

The BRT HARTNER BPS is › Rugged machine-design for durable application › Paddle width 338 mm
suitable within the range of › Shaft with patented eccentric bearings › 6 / 8 / 12 / 16 / 24 paddles
the waste paper assortment › Rugged changeable bearings › 2 sievepaddle-widths available
both for the separation from › Patented adjustable sieve-opening › Throughput from 6 t/h to 45 t/h
paper and cardboard boxes › Many types for each purpose › Easy to maintain
and for the finesorting of the › Sieve-area from 10.9 m2 to 43.6 m2 › For fines/trash and cardboard-sorting
problematic disturbing of › High housing
portions in the waste paper, › Screwable screen linings
here particularly also for the
improvement of the
deinking quality.
BPS 12 BPS 14 BPS 16 BPS 20 BPS 22 BPS 30 BPS 45

Model 1 Deck 1 Deck 1 Deck 2 Deck 2 Deck 2 Deck 3 Deck

Paddle width 338 mm 338 mm 338 mm 338 mm 338 mm 338 mm 338 mm
Useful width 2,070 mm 2,070 mm 2,770 mm 2,070 mm 2,070 mm 2,770 mm 2,770 mm
Paddle length 5,300 mm 6,300 mm 6,300 mm 2x 4,300 mm 2x 5,300 mm 2x 5,300 mm 3x 5,300 mm
Outlet opening 258 mm 258 mm 258 mm 258 mm 258 mm 258 mm 258 mm
Drive power 11 kW 11 kW 11 kW 22 kW 22 kW 22 kW 33 kW
Throughput 10-12 t/h 12-14 t/h 14-16 t/h 18-20 t/h 20-22 t/h 25-30 t/h 35-45 t/h
Sieve area 10.9 m² 13 m² 17.3 m² 17.6 m² 21.8 m² 29.1 m² 43.6 m²
Paddle no. 6 6 8 12 12 16 24

40 41
42 43
 Trommel Screen
SD
BRT HARTNER SD

SD Screen Drums are used to screen commercial waste, household waste and other types of material. It enables
screening in several steps with different sized openings. The typical screen cut size is from 60 to 300 mm. The
SD Screen Drums thoroughly turn and throw the material so that ideal separation rates are reached. Different
entanglement protection features make this 3D screen very maintenance and cleaning friendly.

The machine is available in three different diameters and a total of seven different lengths. The SD Screen Drum is
extremely sturdy. The bearing races, radial wheels, screen sheets and other wear parts have a very long lifespan.

SD 21 SD 25 SD 30

Drum diameter 2,100 mm 2,450 mm 2,950 mm

Length of sieving surface 6,000 - 8,000 mm 6,000 - 12,000 mm 6,000 - 12,000 mm

Total length of drum body 8,000 - 10,000 mm 8,000 - 14,000 mm 8,000 - 14,000 mm
Total sieving area 40 - 53 m² 46 - 92 m² 65 - 130 m²
Thickness of screen plates 8, 10 mm 8, 10 mm 8, 10 mm
Drum inclination 4° 4° 4°
Thickness of rings 4 or 8 8 or 12 8 or 12
Drive 1 x 11 kW or 1 x 15 kW 2 x 7,5 kW or 2 x 15 kW 2 x 7,5 kW or 2 x 15 kW
Total weight 15 - 17 t 21 - 30 t 26 - 38 t

44 45
SD

46 47
 Stationary Trommel Screen
ST
BRT HARTNER ST

The ST Stationary Trommel Screens are a modification of the Mobile Drum Screens of the Terra Select brand. These
screens are designed for stationary plants and therefore electrically driven and firmly mounted onto a substructure.
The application range is very versatile and includes compost, all kinds of soil or wood as well as household waste or
metal. The screening of fine particles up to 80 mm grit size is the priority with this machine. If requested, the drum
screen can also be equipped with entanglement protection or a cleaning device with a scraper. A housing made of
sheet steel completes the scope pf supply.

ST 20 ST 22 ST 25

Drum diameter 2,000 mm 2,200 mm 2,500 mm

Length of sieving surface up to 8,400 mm up to 8,400 mm 8,400 mm
Total length of drum body up to 9,000 mm up to 9,000 mm 9,000 mm
Total sieving area up to 57 m² up to 62 m² up to 70 m²
Thickness of screen plates 8 or 10 mm
Internal screw 180 mm high and 6 mm thick
Drum inclination 0°
Number of radial wheels 4 4 4
Drive 2 x 7,5 kW 2 x 11 kW 4 x 9,2 kW

48 49
 ST

50 51
 Coarse Screen
SC
BRT HARTNER SC

SC Rotor screens provide a functioning and economic way to perfectly separate a wide range of materials. The input material is
fed from the front. The cardboard “swims” over the screen. The mixed paper is pulled down through the rotor screen discs.

› Efficient separation of cardboard and › Almost no danger of entangling

cardboard packagings from newspaper › Dynamic adjustment of screen mesh size
› Reasonable price, long service life › Frequency controlled speed adjustment
› Insensitive to disruptive material › Easy to clean
› Loosened up and even material feeding › Optional: adujstment of screen inclination
to post-sorting › Easy integration into existing sorting plants

SC 40 SC 60 SC 90

Working width 1,700 mm 1,700 mm 1,700 mm

Length approx. 4,000 mm approx. 6.000 mm approx. 9.000 mm
Screen surface approx. 6.7 m² approx. 9.8 m² approx. 15.3 m²
Weight approx. 2.6 t approx. 5.2 t approx. 7.8 t
Mesh size > A4 > A4 > A4
Amount of rotor elements 10 15 22
Amount of discs per element 8 8 8
Power requirement 3 kW 6 kW 9 kW
Throughput up to 10 t/h up to 20 t/h up to 30 t/h

52 53
 SC

54 55
 Fine Screen
SF
BRT HARTNER SF

› Optimal subsequent treatment of mixed paper fraction

› Efficient screening of disruptive materials and small parts
› Reasonable price, long service life
› Additional improvement of performance and quality
› Loosened up and even material feeding to post-sorting
› Easy to clean
› Almost no danger of entangling through long foils or tapes
› Easy integration into existing sorting plants

SF 40 SF 60 SF 90
Working width 1,700 mm 1,700 mm 1,700 mm
Length approx. 4,000 mm approx. 6,000 mm approx. 9,000 mm
Screen surface approx. 6.7 m² approx. 9.8 m² approx. 14.7 m²
Weight approx. 2.4 t approx. 5.0 t approx. 7.5 t
Mesh size > 100 mm > 100 mm > 100 mm
Cascade - 500 mm 500 mm
Amount of rotor elements 22 34 51
Use the BRT HARTNER SF Fine screen for post-treatment of the mixed paper fraction. Producing a loose, even stream, Amount of discs per element 14 14 14
the fine screen prepares the material in an optimal way for manual, mechanical or optical sorting. The oversize grain Power requirement 2.2 kW 4.4 kW 6.6 kW
consists mainly of valualbe de-inking material. Throughput waste paper and cardboard up to 7 t/h up to 12 t/h up to 18 t/h

56 57
58 59
 Air Belt Separator
BBS
BRT HARTNER BBS

The separator operates in recirculation mode. A second fan extracts the dust-laden air through a filter from the
settling chamber and transfers the cleaned air to the surroundings. The separated dust is supplied to the light
material fraction.

› High recovery rate of light fraction

› Numerous adjustment parameters allow machine adaptation for an optimal
separation result for different materials
› Integrated filter unit

BBS
The separator classifies the input material into a light weight and a heavy weight fraction. The input material has
to be free of fines and oversizes as far as possible. The input material has to be pourable and may not agglutinate. Working width 1,600 mm

For good separation results, the ratio of the smallest to the largest particle should be 1 : 4. Throughput up to 160 m³/h
Length total 9,200 mm
The input material must be evenly discharged on the acceleration belt. Under the head of the accelerating belt Width total 2,400 mm
a nozzle is placed. The input material passes this nozzle in free fall. Very light components are blown out of the Height total 4,600 mm
stream over the arch belt directly into the settling chamber. In the transfer area, very heavy parts fall down on a
Installed electrical power 43 kW
heavy material discharge belt. All other parts bounce against the arch belt and are also separated into light and
Arch belt 2.2 kW
heavy fractions by the radius and the adjustable pitch of the arch belt. In the settling chamber the light fraction is
Fan for nozzle 22.0 kW
separated from the air stream and discharged by the light material discharge belt.
Fan for underpressure generation 15.0 kW

60 61
 BBS

62 63
 Electric Waste Dismantler
EWD
BRT HARTNER EWD

The manual opening of the plastic housings › Suitable for household appliances, toys, electronic › Low dust formation
of used small household appliances, and electronic tools, etc. › Space-saving
electrical and electronic tools, toys and › Cracking of the plastic housings for removing metal parts › Low noise level
medical equipment is time-consuming and › Turn key design › Low energy consumption
dangerous. Splitters and sharp edges, as › Metered material transfer to sorting › Economic purchase price
well as the appliances’ contents may cause › No risk of injury for personnel › Slow runner
injuries.

The EWD Electric Waste Dismantler

executes this work automatically, safely and
DM 12 DM 18 DM 24
fast. The plastic housings are coarsely broken.
Working width 1,200 mm 1,800 mm 2,400 mm
The inside parts remain largely intact and can
Hopper volume 2 m³ 2 m³ 2 m³
be removed safely. They are freely accessible
Outer length 2,700 mm 3,300 mm 3,900 mm
and – as opposed to shredders –they are not
destroyed. Outer width 2,200 mm 2,200 mm 2,200 mm
Feeding height approx. 3,800 mm approx. 3.800 mm approx. 3.800 mm
The crushed housings are transported to Power requirement 22 kW 30 kW 30 kW
subsequent sorting in a continuous material Total weight 6t 8t 10 t
flow. Max. speed 18 rpm 18 rpm 18 rpm
Max. throughput 30 m³/h 45 m³/h 60 m³/h
Max. throughput with electrical appliances 2 t/h 3 t/h 4 t/h

64 65
EWD

66 67
 Bale Dewiring
BD
BRT HARTNER BD

› Mechanic dewiring of press bales

› Automatic opening and removing of wire strapping
› Packing of removed bale wires
› Wire cutting without danger of injury
› For bales consisting of plastics, foils, PET bottles, paper etc.
› Self-acting adaptation to bale size
› Automatic adjustment to material density
› High availability due to wear-resistant edges
› Delivery complete with apron conveyor, all drives and electric control system
› Compact material preparation system in combination with BB Bale Breaker

BD
The Bale Dewiring machine removes wire strappings automatically from corded bales.
The bales are fed onto a sturdy apron conveyor. The cutting and removing mechanism adjusts automatically to Working width 1,400 mm

the individual bale size and density. The removed wires are packed and discharged to the bottom. Bale dimensions max. (w x h x l) 1,500 x 1,200 x 2,500 mm
Employment of staff for bale cutting is no longer necessary. The wire strappings are under high tension and may cause Bale weight approx. 400 - 2,500 kg
serious injuries when cut per hand. The bale dewiring machine increases operatonal safety by preventing such accidents. Width 4,600 mm
It is recommended to operate the bale dewiring machine combined with the tried and tested BB Bale Breaker. The
Length 6,500 mm
material is unraveled and transformed into a loose and metered material stream.
Height 3,250 mm

The use of the Bale Dewiring is especially recommendable in combination with the proven BB Bale Breaker. The complete Power requirement 15 kW

automation of the material preparation by BRT HARTNER technology saves staffing, time and costs. Throughput up to 60 bales/h

68 69
BD

70 71
 Perforator
PS / PD
BRT HARTNER PS / PD

› Mechanic dewiring of press bales › Self-acting adaptation to bale size

› Automatic opening and removing of › Automatic adjustment to material density
› wire strapping › High availability due to wear-resistant edges
› Packing of removed bale wires › Delivery complete with chain belt conveyor, all drives
› Wire cutting without danger of injury and electrical control system
› For bales consisting of plastics, foils, › Compact material preparation system in
› PET bottles, paper etc. combination with a Bale Breaker

PS 06 PS 12 PS 14 PD 06 PD 12 PD 14

Working width 600 mm 1,200 mm 1,400 mm 600 mm 1,200 mm 1,400 mm

Length 1,050 mm 1,620 mm 1,820 mm 1,050 mm 1,620 mm 1,820 mm
Width 680 mm 680 mm 680 mm 1,360 mm 1,360 mm 1,360 mm
Height 360 mm 360 mm 360 mm 360 mm 360 mm 360 mm
Weight 300 kg 600 kg 700 kg 600 kg 1,200 kg 1,400 kg
Number of trommels 1 1 1 2 2 2
Perforators are excellently suited for material feeding per front loader, as well as placing the machine over the conveyor
Number of male connectors 8 16 16 16 32 32
belt charging the bale press. The bottles are punctured and pressed flat. Bottles rolling no more on the belt considerably
Power requirement 2 kW 4 kW 4 kW 4 kW 8 kW 8 kW
facilitates buffering and transport of the material. The conveyor belt is used more efficiently for a much faster feeding
of the bale press. The perforator‘s mobility allows flexible handling and fast installation wherever needed. Modified, the Speed 60 rpm 60 rpm 60 rpm 60 rpm 60 rpm 60 rpm

machine can also be used as glass breaker. Throughput 40 m³/h 70 m³/h 80 m³/h 80 m³/h 140 m³/h 160 m³/h

72 73
 PS / PD

Double Perforator with Chute

Double Perforator

Single Perforator

74 75
 Stationary Shredder
ZS 55
TEUTON ZS 55

TEUTON ZS 55 by Eggersmann is currently TEUTON ZS 55 only requires minimal

the most versatile stationary shredder on the maintenance. The daily check requires
market. nothing more than opening the shredding
chamber from the machine’s touch panel,
From coarse pre-shredding – even of the providing safe and comfortable access.
most difficult feed materials – to the finished
end product, the TEUTON ZS 55 offers
great application versatility thanks to its
unique screen basket system. The machine
can be flexibly set up to account for various
framework conditions such as input material, ZS 55
throughput and desired end grain size Totel weight max. 20 t
and can this be incorporated into existing Engine 2 x three-phase 160 kW = 320 kW
recycling processes and plants with ease. Number of replaceable teeth / shredding rotor 30
Number of counter teeth 19
Thanks to its sturdy steel construction,
Rotor length 3,000 mm
TEUTON ZS 55 can deal with extremely
Rotor diameter 1,050 mm
high stress and thus delivers a continuous
Rotor speed (variabel) max. 40 rpm
shredding process as well as a uniform
discharge of shredded material to the Rotor drive electro-hydraulic planetary gear

downstream conveying systems. Control radio remote control (optional)

76 77
ZS 55

78 79
 Stationary Pre-Shredder
SES 250
The FORUS SES 250 is a two-shaft shredder with electric drive. It is used as a pre-shredder for different types of
material. It shreds household waste, bulky waste, commercial waste, old wood and demolition wood, green cuttings
and organic waste effortlessly. The slow-running shredder processes foils, paper and electric waste with equal
efficiency. The final particle size varies from 150 to 350 mm, depending on the tools that are used.

The drive and the electric control system are integrated into the machine frame which makes for a compact
construction design with hook lift and container rollers. The FORUS SES 250 is equipped with a hydraulically tiltable
chute for easy infeed.

The FORUS SES 250 is an excellent allrounder, a performance package which reliably adapts to your requirements.

SES 250

Totel weight max. approx. 12 to

Engine electro-hydraulic
Number of replaceable teeth / shredding rotor 40 - 80 pcs.
Rotor length 1.500 mm
Rotor diameter 2x 570 mm
Crushing beam types A1 to A5
Drive power 132 kW

80 81
SES 250

82 83
 ECO
ENGINEERS

BRT HARTNER
Lengericher Straße 1
49479 Ibbenbüren
Germany

Fon +49 (0) 5451 50773-0

www.brt-hartner.de

1. All specifications, descriptions and illustrations are subject to change without prior notice.
2. Illustrations and descriptions may include options that are not part of the standard equipment.