Simple Harmonic Motion and Pendulums: SP211: Physics I Fall 2018 Name
Simple Harmonic Motion and Pendulums: SP211: Physics I Fall 2018 Name
Simple Harmonic Motion and Pendulums: SP211: Physics I Fall 2018 Name
SP211: Physics I
Fall 2018
Name:
1 Introduction
When an object is oscillating, the displacement of that object varies sinusoidally with time. Simple Harmonic
Motion describes this oscillatory motion where the displacement, velocity and acceleration are sinusoidal. The
objects we are most interested in today are the physical pendulum, simple pendulum and a spring oscillator.
We can model this oscillatory system using a spring. If we have a spring on the horizontal (one-dimensional motion),
and using Hooke’s Law (F = -kx) we can use the following expression:
−k ∗ x = m ∗ a (1)
In order to solve this expression, we will rewrite it.
−k d2
x(t) = x(t) (2)
m dt
The only solution that can satisfy this equation is a sinusoidal function. For today, we will be using:
1
2.2 Measure the Spring Constant
Similar to Lab 4, we will start by measuring the spring constant k. For this part of the lab, attach the spring to
the hanger, and measure the length of the spring without any mass attached to it. This is your x0 , and record it
in the appropriate column in the chart below for all masses.
Data Table
Mass Weight (m*g) Equilibrium Legnth Spring Length (x) x-x0 (m)
(x0 )
Use the graph below to plot the Weight (y-axis) versus the x-x0 (x-axis). Draw a line of best fit, and then
calculate the slope by making a 90◦ triangle. This slope is your Spring Constant.
k= N/m
2
2.3 Measure the Period of the Oscillations
Attach the rubber bob to the end of the spring. Pull the rubber bob enough so you can measure oscillations
for 10 periods, but not so much that it moves randomly. The goal here is to only have the spring move in
the y-direction. Measure 10 periods with your timer and then divide by 10 to get the period for 1 oscillation.
Data Table
Trial Time for 10 periods (seconds) Time for 1 period (seconds)
1
AVERAGE
Here, M is the mass of the rubber bob and mspring is the mass of the spring.
Using your numbers from the previous sections, calculate the theoretical period of the spring:
T= s
Calculate the percent difference between the theoretical and experimental value.
% Difference = %
AVERAGE
3
3.2 Calculations for Simple Pendulum
Calculate the theoretical period of your pendulum.
Length of Pendulum = m
Mass = m
T= s
Calculate the percent difference between the theoretical and experimental value.
% Difference = %
4 Rigid Pendulum
A physical pendulum is expected to swing with a period such that:
s
I
T = 2π (10)
mgh
where m is the mass of the pendulum, I is the rotational inertia of the pendulum (including the use of the parallel
axis theorem as needed), and h is the distance from the pendulum’s center of mass to the axis of rotation. For
this metal meter stick, rotating about a point 10 cm from the end of the stick) is Irot = 0.11 kg ∗ m2 . Measure
the time it takes for 10 oscillations when the physical pendulum is rotating around the 10cm mark and calculate
the expected period.
mass of pendulum = kg
Theoretical Period = s
Data Table
Trial Time for 10 periods (seconds) Time for 1 period (seconds)
1
AVERAGE
% Difference = %
4
5 Problem Solving: The Simple Harmonic Motion of a Spring
A 2.3 kg mass oscillates back and forth from the end of a spring of spring constant 120 N/m. At t = 0, the position
of the block is x = 0.13 m and its velocity is vx = -3.4 m/s.
4. What is the maximum speed of the block and where is this experienced over the motion?
5. What is the phase constant? (Choose a cosine function to describe the motion)
7. What is the maximum acceleration of the block and where is this experienced over the motion?
5
6 Problem Solving: The Simple Harmonic Motion of a Pendulums
1. Working from the general experession for the something thatqoscillates sinusoidally and the particular result for
k
ω for the block-spring oscillator: x(t) = xmax cos(ωt + φ), ω = m show that the mechanical energy is a constant
1 2
Emech = 2 kxmax for all time.
2. By carrying out a Newton’s 2nd law for rotational analysis for a simple pendulum (a point mass on the
end of a string), derive an expression for the period for small amplitudes. (We’ll be making use of the small angle
approximation sin(θ) ≈ θ which is valid when θ is small and expressed in radians.)
3. A physical pendulum is a rigid extended object that is mounted to a pivot. Its essential features are its
rotational inertia I about the pivot, its mass M, and the distance between the pivot and the center of mass hcom .
A. Derive the general expression for its period for small amplitudes.
B. Calculate the period for a meter stick with the pivot mounted at one end.
C. Calculate the period for a meter stick with the pivot mounted at the 20 cm mark.