Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Regulator With Filter: Model KZ03

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

No.

SS2-5190-0700

Regulator with Filter


Model KZ03

OVERVIEW
The Regulator with Filter provides a constant
pressure of clean, dry supply air to pneumatic
instruments and control valves. An air-set incor-
porated with a pressure adjustment wheel can be
used for manual driving of a pneumatic cylinder
and for manual setting of a pneumatic signal.

KZ03-1 KZ03-2 / -3
(with handwheel and gauge)

SPECIFICATIONS
Model no. KZ03-1 KZ03-2 KZ03-3
Primary pressure (kPa) Secondary pressure +50 or more (970 max.)
Secondary pressure (kPa) 140 ± 4 (fixed) 12 to 400 (variable) 12 to 700 (variable)
Performance
Pressure Change of secondary 140 ± 4 for primary pres- 400 ±4 for primary pres- 700 ±4 for primary pres-
regulation pressure (kPa) sure change of 200 to 970 sure change of 450 to 970 sure change of 800 to 970
Flow char- 1) KZ03-1 (for prim. press. 300 - 900 kPa) 2) KZ03-2 (for prim. press. 500 - 900 kPa) 3) KZ03-3 (for prim. press. 800 - 900 kPa)
acteristics Second Second Second
press. (kPa) press. (kPa) press. (kPa)

140 400 700


Prim. press. 900 Prim. press. 900 Prim. press. 900
130 390 690

120 380 680


Prim. press. 300 Prim. press. 300 Prim. press. 300
110 370 670

0 50 100 150 200 l/min(N) 0 50 100 150 200 l/min(N) 0 50 100 150 200 l/min(N)
Air flow Air flow Air f low

Air consumption 0.95 l/min(N) or less


Material Filter: Sponge, 3 μm (option: 3 μm stainless filter)
Case: Aluminum diecast
External screws and drain wing bolt: Stainless steel
Ambient temperature -30 to 80°C
Air pressure connections Rc1/4 or 1/4NPT internal thread
Drain capacity 22 cm3
Weight 0.7 kg
Maximum flow 200 l/min (secondary pressure drop: 25 kPa or less)

-1- 14th edition


No. SS2-5190-0700 Azbil Corporation

MODEL SELECTION
Pressure regulator with filter
Model KZ03 - I II - III IV
Basic model no. Selections Optional selections
KZ03 - -

I Ps = 140 ± 4 kPa 1
Available supply pressure (Ps): Ps < 400 kPa 2
Available supply pressure (Ps): 400 < Ps < 700 kPa 3
II Rc1/4 internal (Standard) A
1/4NPT female B

III Without pressure gauge XX


IV 1½ inch (40 mm) with pressure gauge (scale)
Primary maximum scale & unit Secondly unit Recommended supply pressure
2 Ps < 1.5 kgf/cm2 1A
4 1.5 < Ps < 3.0 kgf/cm 2 1B
6 kgf/cm2 none
1N
3.0 < Ps < 4.5 kgf/cm2
10 4.5 < Ps < 7.0 kgf/cm2 1C
30 Ps < 22 psi 1D
60 22 < Ps < 45 psi 1E
psi none
100 45 < Ps < 65 psi 1P
150 65 < Ps < 100 psi 1F
2 Ps < 1.5 bar 1G
4 1.5 < Ps < 3.0 bar 1H
bar none
6 3.0 < Ps < 4.5 bar 1Q
10 4.5 < Ps < 7.0 bar 1J
200 Ps < 150 kPa 1K
400 150 < Ps < 300 kPa 1L
kPa none
600 300 < Ps < 450 kPa 1R
1,000 450 < Ps < 700 kPa 1M
0.2 Ps < 0.15 MPa 1S
0.4 0.15 < Ps < 0.3 MPa 1T
MPa none
0.6 0.3 < Ps < 0.45 MPa 1U
1 0.45 < Ps < 0.7 MPa 1V
2 Ps < 1.5 kgf/cm2 2A
4 1.5 < Ps < 3.0 kgf/cm2 2B
6 kgf/cm2 kPa
2N
3.0 < Ps < 4.5 kgf/cm2
10 4.5 < Ps < 7.0 kgf/cm2 2C
2 Ps < 1.5 kgf/cm2 3A
4 1.5 < Ps < 3.0 kgf/cm 2 3B
6 kgf/cm2 MPa 2 3N
3.0 < Ps < 4.5 kgf/cm
10 4.5 < Ps < 7.0 kgf/cm2 3C
200 Ps < 150 kPa 4K
400 150 < Ps < 300 kPa 4L
600
kPa kgf/cm2 300 < Ps < 450 kPa 4R
1000 450 < Ps < 700 kPa 4M
0.2 Ps < 0.15 MPa 5S
0.4 0.15 < Ps < 0.3 MPa 5T
0.6
MPa kgf/cm2 0.3 < Ps < 0.45 MPa 5U
1 0.45 < Ps < 0.7 MPa 5V

-2-
Azbil Corporation No. SS2-5190-0700

DIMENSIONS
[Unit: mm]

Rc1/4 internal
Outlet for air prees.

Rc1/4 internal
30 Inlet for air press.

M4 internal
125

30

P.C.35

A A
15
REF
View A - A

40 mm press. gauge 83

183 max.

8.5
Outlet for
air press. Inlet for
air press.
50

92
Drain plug

Note) The illustration is for regulator with filter incorporated with pressure adjustment wheel and 40 mm dia.
pressure gauge.

-3-
Please, read ‘Terms and Conditions’ from following URL before
the order and use.
http://www.azbil.com/products/bi/order.html
Specifications are subject to change without notice.

1-12-2 Kawana, Fujisawa


Kanagawa 251-8522 Japan
http://www.azbil.com/
14th edition: July 2015
No part of this publication may be reproduced or duplicated
without the prior written permission of Azbil Corporation.
(11)

You might also like