Cyborg Lights Windows 10 : ambx https://www.reddit.com/r/ambx/comments/4ebmbg/cyborg_lights_wi...

ANNOUNCEMENTS

¿Quieres unirte? Inicia sesión o regístrate en segundos. | español

ART

Este es una entrada archivada. No podrás votar y comentar.

ASKREDDIT
este enlace fue enviado el 11 Apr 2016
Cyborg Lights Windows 10 (self.ambx)
ASKSCIENCE hace 1 año * por stere0man 6 puntos (88% votado positivamente)
shortlink: https://redd.it/4ebmbg
AWW
I posted about this on the official ambx forums before they
stupidly decided to remove them, if you are having trouble
BLOG
running cyborg lights in windows 10 the issue is down to USB Cybertortuga ●●●●●●●●●●●●●●
power suspend, this is also an issue in Windows 8.1, anyway
BOOKS
here's some instructions on how to get Cyborg lights to run recordarme resetear contraseña
properly in Windows 10
CREEPY First you need to download the drivers from the madcatz site Enviar un nuevo enlace
http://madcatz.com/downloads/
DATAISBEAUTIFULthedrivers are listed under windows 7/8 drivers, there are Enviar un nuevo post de texto
currently no official windows 10 drivers so just download the
DIY x86 or x64 windows 7/8 drivers depending on your OS, (for ambx
windows 10 64 get the x64 version and for windows 10 32 get suscribirse 34 lectores
DOCUMENTARIESthe x86 version)
4 usuarios conectados
Once downloaded extract and install the drivers by running
EARTHPORN
Cyborg_amBX_LightPod_SD7_00000025_64_Full_pfw.exe
This is a work in progress. Please feel free to
this will install both the drivers and the Ambx software, once
EXPLAINLIKEIMFIVE
contribute!
they are installed run ambx control panel and check for
updates, you may have to check a few times until its fully
Downloads
FOOD
updated. MadCatz (C.Y.B.O.R.G.)
FUNNY once updated reboot the computer, on reboot the lights will not Windows 7/8.1/10 64-bit
Windows 7/8.1/10 32-bit
work, they come on for a second then switch off, this is where it
FUTBOL gets tricky, Philips
You need to open up windows device manager by right clicking Gaming Products Page
FUTUROLOGY the start menu and selecting device manager, in device Driver Download

manager locate the cyborg lights under Human Interface amBX Software
GADGETS Devices, right click Cyborg amBX Gaming Light (HID) and select amBX Download Page
properties, this will open a properties window, from there select
Third-Party Stuff
GAMING details and from the drop down menu select hardware id, now
select and right click and copy the first value, on my pc its amBX.com Mirror
Aurora Synesthesia
GETMOTIVATED
HID\VID_06A3&PID_0DC5&REV_0110 Technical Reference

GIFS
now close all the device manager windows and run regedit by
typing regedit into windows start and pressing enter now in MODERADORES enviar mensaje a los moderadores

HISTORY
regedit click search and paste your hardware id in and search or ClairelyClaire
alternatively you can navigate to Información sobre el equipo de moderación »

IAMA HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB
\VID_06A3&PID_0DC5\6&10488bfd&0&1\Device Parameters
click
INTERNETISBEAUTIFUL on Device Parameters and in the right window pane you
should see 3 Dword strings
JOKES
AllowIdleIrpInD3

LIFEPROTIPS
DeviceSelectiveSuspended
EnhancedPowerManagementEnabled
LISTENTOTHIS double click each of these and change the Hexadecimal value
from 1 to 0
MILDLYINTERESTING
now you need to do the same for the second light, it should be
listed directly under the first light in regedit, mine is here
MOVIES
< > discusión en r/ambx X
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB
MUSIC
\VID_06A3&PID_0DC5\6&10488bfd&0&2\Device Parameters 1
Sleep mode problem
so click on Device Parameters and in the right window pane
double click each of the Dwords and just change the hex values

1 de 3 28/05/17 10:56
Cyborg Lights Windows 10 : ambx https://www.reddit.com/r/ambx/comments/4ebmbg/cyborg_lights_wi...

again from 1 to 0
AllowIdleIrpInD3
DeviceSelectiveSuspended
EnhancedPowerManagementEnabled
now reboot and your lights should work,
if they are still not working you may need to go into device manager again and click Universal Serial Bus Controllers
and open properties on each USB Root hub and select Power Management and make sure there's no ticks in Allow the
computer to turn off this device to save power.
anyway hope this helps.
8 comentarios compartir

todos los 8 comentarios

ordenado por: mejores
[–] BadgerMedicine 3 puntos hace 11 meses

This is awesome! I've had my lights sitting in a box for about 2 years now because they stopped working on my PC.
Now I just have to figure out how to get my games to work with it.
enlace embed

[–] gaz8203 1 punto hace 1 año

I <3 You! Thanks so much.

enlace embed

[–] pattywack7 1 punto hace 1 año

cannot believe I finally found you! had theses lights for a long time now! aprox 6 months ago a light wouldn't work. I
tryied everything. running 7ult 64 at the time. now 10 64. wasn't able to get in device manager the 2 lights to come
up. 1 st uncheck the usb power controller. now 2 shows up. go through registry.. following ur changes aprox. restarted
2 lights in device manger. but now only 1 works at a time. they both have the same ID. so I still see 2 but only 1
works at a time. any possible ideas? and yes I have like 20 usb ports. I tried so many different possible combinations.
n when I use a seprate hub like I had been using for years! but when pluged in nothing. they turn on on certain usb
ports in the hub but doesn't register in device mang thanks
enlace embed

[–] Argoxp 1 punto hace 1 año

Thank you Sooo much! you are a hero sir!

enlace embed

[–] [deleted] 1 punto hace 11 meses*

I see only 1 dword string in the regedit what do I do?

http://i.imgur.com/iiqR8Wc.jpg
enlace embed

[–] Corey_Joe 1 punto hace 10 meses

Amazing, thank you so much for writing this up.

enlace embed

[–] luiciphier 1 punto hace 7 meses

I used to use Aurora Synesthesia (and still do for audio) but the excellent little glOW is far more responsive and uses
less CPU cycles.
http://mattcallaghan.blogspot.co.uk/2016/01/ambx-glow.html
enlace embed

[–] thecrash1001 1 punto hace 7 meses

Thanks dude now it's working, the only thing is that is working only for some software and i do not know why ,
otherwise thanks so much! :)
enlace embed

acerca de ayuda apps y <3

blog reglas del sitio herramientas reddit gold
acerca de FAQ Reddit para redditgifts
código fuente wiki iPhone
< > discusión en r/ambxpublicidad X reddiquette Reddit para
mod guidelines Android
1 contacto sitio móvil
Sleep mode problem
botones

2 de 3 28/05/17 10:56
Cyborg Lights Windows 10 : ambx https://www.reddit.com/r/ambx/comments/4ebmbg/cyborg_lights_wi...

El uso de este sitio implica la aceptación del Acuerdo de Usuario y de la Política de privacidad. © 2017 reddit inc. Todos los derechos reservados.
REDDIT and the ALIEN Logo are registered trademarks of reddit inc.

< > discusión en r/ambx X

1
Sleep mode problem

3 de 3 28/05/17 10:56