PC800-7 FLYWHEEL HORSEPOWER

HYDRAULIC EXCAVATOR
STANDARD EQUIPMENT 338 kW 454 HP @ 1800 rpm
TRANSPORTATION GUIDE ENGINE AND RELATED ITEMS: HYDRAULIC CONTROLS: OPERATING WEIGHT
Transportation specifications (length x height x width) ● Air cleaner, double element, dry ● Fully hydraulic, with Electronic Open-Center Load-Sensing
● Cooling fan, with fan guard (EOLSS) and engine speed sensing (pump and engine mutual PC800-7 : 76070–76870 kg
Specs shown include the following equipment:
PC800-7 : Boom 8040 mm 26'5", arm 3600 mm 11'10", bucket 3.4 m3 4.45 yd3, shoes 610 mm 24" double grouser
● Engine, Komatsu SAA6D140E-3 control system) 167,700–169,470 lb
● One gear pump for control circuit
PC800SE-7 : Boom 7100 mm 23'4", arm 2945 mm 9'8", bucket 4.3 m3 5.62 yd3, shoes 610 mm 24" double grouser ELECTRICAL SYSTEM:
● Two axial piston motors for swing with single-stage relief valve
PC800SE-7 : 75570–76370 kg
● Alternator, 50 amp, 24 V ● One axial piston motor per track for travel with counter balance 166,600–168,370 lb

PC800-7 BACKHOE
3 Kits Transportation 4 Kits Transportation ● Batteries, 170 Ah, 2 x 12 V valve
● Starting motors, 11kW ● Two variable capacity piston pumps
Work equipment assembly (Backhoe) Work equipment assembly (Backhoe)
● Working lights-2 boom, 2 cab top front, 1 cab bottom ● Two control valves, 5+4 spools (boom, arm, bucket, swing, and
Weight : PC800-7 : 18.3 t 20.2 U.S.ton Weight : PC800-7 : 18.3 t 20.2 U.S.ton
PC800SE-7 : 18.2 t 20.1 U.S.ton PC800SE-7 : 18.2 t 20.1 U.S.ton ● Step light with timer travel)

Boom Boom
● Auto decelerator
UNDERCARRIAGE:
● 610 mm 24'' double grouser
● Control levers, wrist control levers for arm, boom, bucket, and
swing with PPC system
● Control levers and pedals for steering and travel with PPC system
PC800SE-7 BACKHOE
● 8 track/3 carrier rollers (each side)
● Hydraulic track adjusters (each side)
● Oil cooler
● In-line filter PC
PC800-7 : 7.7 t : 8345 x 2600 x 1500
8.5 U.S.ton : 27'5" x 8'6" x 4'11"
PC800SE-7 : 6.8 t : 7405 x 2465 x 1500
PC800-7 : 7.7 t : 8345 x 2600 x 1500
8.5 U.S.ton : 27'5" x 8'6" x 4'11"
PC800SE-7 : 6.8 t : 7405 x 2465 x 1500
● Full length track guard
● Variable track gauge
● Heavy lift mode system
● Shockless boom control
● Swing priority selection system
800
7.5 U.S.ton : 24'4" x 8'1" x 4'11" 7.5 U.S.ton : 24'4" x 8'1" x 4'11" ● Sealed track
● Two-mode setting for boom
GUARDS AND COVERS:
Arm Arm DRIVE AND BRAKE SYSTEM:

HYDRAULIC EXCAVATOR
● Dust-proof net for radiator and oil cooler
● Pump/engine room partition cover ● Brakes, hydraulic lock travel brakes, oil disc parking
PC800-7 : 4.5 t : 4800 x 1410 x 750 PC800-7 : 4.5 t : 4800 x 1410 x 750 ● Travel motor guards ● Hydrostatic two travel speed system with planetary triple reduction
5.0 U.S.ton : 15'9" x 4'8" x 2'6" 5.0 U.S.ton : 15'9" x 4'8" x 2'6" ● Strengthened revolving frame underguard final drive
PC800SE-7 : 4.9 t : 4075 x 1695 x 755 PC800SE-7 : 4.9 t : 4075 x 1695 x 755 ● OPG top guard (operator protective guards ISO 10262 level 2 (FOG)) OTHER STANDARD EQUIPMENT:
5.4 U.S.ton : 13'4" x 5'7" x 2'6" 5.4 U.S.ton : 13'4" x 5'7" x 2'6"
OPERATOR ENVIRONMENT: ● Automatic swing holding brake
Bucket Bucket ● Damper mount, all-weather, sound-suppressed cab with tinted ● Corrosion resister
safety glass windows, lockable door, intermittent window wiper ● Counterweight, 12000 kg 26,450lb
and washer, floormat, cigarette lighter and ashtray ● Horn, electric
● Multi-function color monitor, electronically-controlled throttle dials, ● Marks and plates, English
PC800-7 : 3.5 t : 2390 x 1880 x 1870 PC800-7 : 3.5 t : 2390 x 1880 x 1870
3.9 U.S.ton : 7'10" x 6'2" x 6'2" 3.9 U.S.ton : 7'10" x 6'2" x 6'2" electric service meter, gauges (coolant temperature, hydraulic oil ● Paint, Komatsu standard
PC800SE-7 : 3.9 t : 2200 x 1950 x 2255 PC800SE-7 : 3.9 t : 2200 x 1950 x 2255 temperature and fuel level), caution lights (electric charge, engine ● Large handrails
4.3 U.S.ton : 7'3" x 6'5" x 7'5" 4.3 U.S.ton : 7'3" x 6'5" x 7'5" oil pressure, and air cleaner clogging), indicator lights (engine pre- ● One-touch engine oil drainage
heating and swing lock light) level check lights (coolant, engine ● PM tune-up service connector
Boom & Arm cylinder Boom & Arm cylinder ● Remote greasing for radiator fan drive
oil, and hydraulic oil level), self-diagnostic system with trouble
data memory
Total 2.6 t 2.9 U.S.ton Total 2.6 t 2.9 U.S.ton ● Rear view mirror (RH)
● Seat, fully adjustable with suspension
Upper structure 5970 19'7" ● Cab with fixed front window
( 2840 9'4")

Base machine
2730 8'11"

(Both PC800-7 and PC800SE-7 are designed with the same weight and dimensions.)
OPTIONAL EQUIPMENT
( 3730 12'3")
3620 11'11"

● Alternator, 75 Amp, 24 V ● Cab front guard (ISO 10262 level 2) ● Rain visor
Width : 3195 10'6" KOMTRAX (optional) with an antenna ● Arms (Backhoe): ● Catwalk ● Rear view mirror (LH)
Weight : 24.9 t 27.4 U.S.ton when mounted PC800-7: ● Coolant heater ● Seat belt 78 mm 3''
—3600 mm 11'10'' HD arm assembly ● Duble frange truck roller ● Shoes:
1445 4'9"

Undercarriage 1305 4'3" PC800SE-7: ● 12V electric supply —710 mm 28'' double grouser
6840 22'5"
—2945 mm 9'8'' SE arm assembly ● Fire extinguisher ● Spare parts for first service
Width : 3390 11'1" KOMTRAX (optional) with an antenna —3600 mm 11'10'' HD arm assembly ● General tool kit ● Track frame undercover (center)
Weight : 46.1 t 50.8 U.S.ton when mounted ● Auto air conditioner ● Grease gun, electric pump with indicator ● Travel alarm
5810 19'1" ● Automatic greasing ● Interconnected horn and warning light ● Vandalism protection locks
Weight : 22.0 t [11 t x 2] ● Booms (Backhoe): ● KOMTRAX
24.3 U.S.ton [12.15 U.S.ton x 2] PC800-7: ● Large-capacity batteries
—8040 mm 26'5'' boom assembly ● Lower wiper
Others 98 Others 98
03 03 PC800SE-7: ● Provision for fast fuel fill
Weight : 12.2 t 13.4 U.S.ton OPG '3" Weight : 12.2 t 13.4 U.S.ton OPG '3"
—7100 mm 23'4'' boom assembly ● Radio AM/FM
" "
2'9 31 2'9 31
1090 3'7" 470 1'7"

1090 3'7" 470 1'7"

0 95 0 95
83 10 25
09 20
83 10 25
09 20
www.Komatsu.com Printed in Japan 201005 IP.As(05)
'6" 18 " '6" 18 "
.8" .8" Photo may include optional equipment.
6'0 6'0
1530 6'0"

1530 6'0"

53kg (117lb) 53kg (117lb)

19 kg (42 lb) 19 kg (42 lb)

Weight : 12.0 t 37 kg (82 lb) Weight : 12.0 t 37 kg (82 lb)

13.2 U.S.ton 16 " 13.2 U.S.ton 16 "
0
5'3 0 2.8 0
5'3 0 2.8
" 70 " 70
50 50
50 01 50 01
'3" 01 0 '6" '8" '3 " 01 0 '6" '8"
06 '8" 01 06 '8" 01
1 90 320 1 90 320

32 kg (70 lb) 50 kg (110 lb) 32 kg (70 lb) 50 kg (110 lb)

CEN00414-00 Materials and specifications are subject to change without notice.

13 is a trademark of Komatsu Ltd. Japan.

Courtesy of Machine.Market
 PC800-7
HYDRAULIC EXCAVATOR
PC800-7 Series Hydraulic Excavator Harmony with Environment

W ALK-A
WALK -AROUND
ROUND
● Low emission engine
Powerful turbocharged and air-to-air aftercooled Komatsu SAA6D140E-3
engine provides 338 kW 454 HP.
FLYWHEEL HORSEPOWER
338 kW 454 HP @ 1800 rpm

OPERATING WEIGHT
See page 4.
PC800-7
Large Comfortable Cab 76070– 76870 kg
167,700 – 169,470 lb
● Low noise and vibration with cab damper mounting PC800SE-7
Productivity Features ● Large-capacity cab with narrow corner posts provides 75570– 76370 kg
improved visibility 166,600 – 168,370 lb
● Large digging force
High operation efficiency with ● Large-capacity air conditioner (optional)
large digging force in rugged ● Pressurized cab prevents external dust from entering
work sites See page 8.
● Large size bucket
The wide and shallow contour
facilitates loading. Easy Maintenance
● Replacement interval is extended
● Heavy lift mode for new hydraulic filter.
The heavy lift mode increases See page 7.
the lifting force by 10%.
● Swing priority mode
The swing priority mode
improves efficiency for loading dump
trucks.
● Two-mode setting for boom
Switch selection allows either powerful
digging or smooth boom operation.
● Fuel consumption is reduced 12%
with Economy Mode.
● Large drawbar pull and steering
force provide excellent mobility.
● Excellent Swing Performance
provides excellent swing performance on slope.
See pages 4,5.

Excellent Reliability and Durability

● Strengthened boom and arm have
large cross-sections and reliable welding
for maximum strength and reliability.
● Protected hydraulic circuit
● Reinforced buckets are highly resis- The cool-running hydraulic system is protected with
Photo may include optional equipment.

tant against wear and impacts. the most extensive filtration system available, includ- Advanced monitor features
● Shockless boom ing a high pressure in-line filter for each main pump.
● Machine condition can be
Switch selection reduces chassis vibration
● Sturdy guards shield the travel motors against checked with Equipment
after sudden stops.
damage from rocks. Large handrail, step and catwalk
provide easy access to the engine and Management Monitoring System
● Boom foot hoses are arranged under ● Highly Reliable Electronic Devices (EMMS).
the boom foot, improving hose life and safety. hydraulic equipment.
Exclusively designed electronic devices have passed See page 7. ● Two working modes combine
● Face seals, which have excellent seal- severe testing. with heavy lift mode for maxi-
ing performance, are used for the - Controller - Sensors - Connectors mum productivity. See page 5.
hydraulic hoses. - Heat resistant wiring See pages 5,6.
2 3

Courtesy of Machine.Market
 PC800-7
P
PRODUCTIVITY
RODUCTIVITY
HYDRAULIC EXCAVATOR

Working Mode Selection

F
FEATURES
EATURES Hydraulics
Unique two-pump system assures smooth compound movement of the
Multi-Function
Color Monitor
work equipment. OLSS (Open Center Load Sensing System) controls all
pumps for efficient engine power use. This system also reduces hydraulic
High Production and Low Fuel Consumption loss during operation.

Active and Economy mode

Engine Excellent Machine Stability
The PC800-7 excavator is equipped with two working modes. Each mode
The PC800-7 gets its exceptional power and work capacity The rear center of gravity and the 12.0 tonne
is designed to match engine speed, pump speed, and system pressure to
from its Komatsu SAA6D140E-3 engine. Output is 13.2 U.S. ton counterweight provides the stability and lifting
the current application, giving the operator flexibility to match equipment
338 kW 454 HP providing more hydraulic power. capacity needed for maximum productivity.
performance to the job at hand.
In addition, the fuel consumption is reduced by 12%
Large Bucket Capacity
when using Economy Mode.
Large capacity bucket has large and shallow contour offers
Large Digging Force Working Mode Application Advantage
easy loading.
Thanks to the high engine output and an excellent hydraulic PC800-7: 3.4 m3 4.45 yd3 Active ● Maximum production/power
A
Mode ● Fast cycle times
system, this machine demonstrates powerful digging force. PC800SE-7: 4.0 - 4.5 m3 5.23 - 5.89 yd3
Economy ● Good cycle times
E Two Working Modes
Large Drawbar Pull and Steering Force Mode ● Good fuel economy

Since the machine has a large drawbar pull and a high steer-
ing force, it demonstrates excellent mobility even when it is Heavy Lift Mode
being used on inclined sites. In addition, this machine is
tank capacity (2750 Heavy Lift Mode
equipped with an automatic travel speed shifting system, Swing Priority Mode
ltr 726.6 U.S. gal) Gives the operator 10% more lifting force on the boom
which makes automatic Hi/Lo shifts.
when needed for handling rock or heavy lifting applications.
Excellent Swing Performance
Two Settings for the Boom
Twin-swing motor system of PC800-7 provides excellent
swing performance on slope. Smooth mode provides easy operation for gathering blasted rock and
scraping operations. When maximum digging force is needed, switch to EMMS (Equipment Management
power mode for more effective excavating. Monitoring System)
Boom raised 1. Monitor Function
Smooth Power Controller monitors engine oil
mode mode level, coolant temperature, bat-
tery charge air-filter restriction,
etc.
The controller finds any abnor-
mality and displays it on the
LCD.

2. Maintenance Monitor Function

Swing Priority Setting informs replacement time of oil
The swing priority setting allows the and filters on LCD when the
Selection Result replacement interval is reached.
operator to use the same easy motion for
180˚ loading as 90˚ loading operations. Oil flow to the swing motor is increased.
ON 180˚loading operations are most efficient. 3. Trouble Data Memory Function
By altering the oil flow, this setting allows stores machine abnormalities
Oil flow to the boom is increased.
you to select either boom or swing as the OFF 90˚loading operations are most efficient. (error codes) in the monitor for
priority for increased production. effective trouble shooting.

Shockless Boom Control

The PC800-7 features a shockless
valve (double-check slow return valve)
that automatically reduces the amount
Extend and
of vibration present when operating the retract
boom. Operator fatigue is reduced
(which can improve safety and
Photo may include optional equipment. productivity), and spillage caused by
vibration is prevented.
4 5

Courtesy of Machine.Market
 PC800-7
HYDRAULIC EXCAVATOR

R
RELIABILITY
ELIABILITY M
MAINTENANCE
AINTENANCE
F
FEATURES
EATURES F
FEATURES
EATURES
Excellent Reliability and Durability Easy Maintenance
Reinforced Bucket Komatsu designed the PC800-7 for easy service access.
PC800-7 bucket is designed exclusively for quarry use
Wide Catwalk (optional) Divided Type Engine Cover Motorized Grease Gun Equipped
and is higher strength for impact and wear. It is highly
Wide walkway for maintenance is pro- The divided engine cover allows with Hose Reel (optional)
resistant against wear and impact and demonstrates high
Side shroud vided around the engine and hydraulic inspection points around the engine to Greasing is made easy with the electric
performance and reliability. Combined with the saddling (2 pieces per each side)
components, allowing easy access to be easily accessed. motorized grease gun and indicator.
type side shroud and the corner teeth, the life of the buck-
inspection and maintenance points.
et has been greatly improved.
Side panel
Lip shroud (2 pieces each between tooth and tooth) reinforce-
Corner tooth Exclusive adaptor for the ment plate
Bottom plate made of duplex wear plates corner tooth

Strengthened Boom and Arm High-pressure In-Line Filtration Sturdy Undercarriage Guard
Thanks to the large cross-sectional The PC800-7 has the most extensive The undercarriage is strengthened to
structure employing a high tensile filtration system available, providing provide excellent reliability and durabil-
strength steel with a thick plate, parti- in-line filters as standard equipment. ity when working on rocky ground or
Grease can drum storage location
tion wall, etc., the boom and arm An in-line filter in the outlet port of blasted rock.
exhibit excellent durability and are each main hydraulic pump reduces
highly resistant to bends and twists. failures caused by contamination.
Reduced Maintenance Costs
Partition wall
Hydraulic oil filter
replacement is
Grease gun Indicator
Wide extended from 500 to The grease gun can be
width arm Partition wall
reached from ground level.
Arm dent
preventive plate
1000 hours.

Large cross-sectional
structure boom

Sturdy guards shield the travel

KOMTRAX® System (optional)
motors and piping against damage The KOMTRAX system monitors
from rocks. machine condition, operating status,
Boom Foot Hoses Metal Guard Rings
operating location, etc., and provides
The boom foot hoses are arranged Metal guard rings protect all the
timely notification of any machine prob-
under the boom foot to reduce hose hydraulic cylinders and improve
lems.
bend during operation, extending hose reliability.
Since data is transmitted via
life and improving operator safety.
satellite communication system,
secure data communication
is possible from any operat-
Track roller guard (full length) ing site including a quarry or
a mine, further improving
Heat-Resistant Wiring
machine reliability.
Heat-resistant wiring is utilized for the
(There are some countries
engine electric circuit and other major
where this feature is not in
component circuits.
service. Please consult
O-Ring Face Seal Circuit Breaker Komatsu distributor for
The hydraulic hose seal method has With the circuit breaker, the machine availability.)
been changed from a conventional can be easily restarted after repair.
taper seal to an O-ring seal. This pro-
vides improved sealing performance DT-type connectors seal tight and
Photo may include optional equipment.
6 during vibration. have higher reliability. 7

Courtesy of Machine.Market
 PC800-7
W
WORKING
ORKING
HYDRAULIC EXCAVATOR

E
ENVIRONMENT
NVIRONMENT
The cab interior is spacious and provides a
comfortable working environment…

Large Comfortable Cab

Superb Visibility Low Noise Design
The PC800-7’s large capacity cab and The noise levels at the operator’s ear are
increased glass area provide superb front decreased by improving the cab mounts
visibility. and cab sealing performance.

Cab Mounts Multi-Position Controls

The new cab damper mounting reduces The multi-position,
vibration and noise at operator’s seat. pressure proportional
control levers allow
the operator to work in
comfort while maintaining
precise control.

Rubber A double-slide mechanism allows the

seat and controllers to move together
Spring
or independently, allowing the operator
to position the controllers for maximum
Silicon productivity and comfort.
Oil

Rigid and Safe Operator's Cab Seat belt shown in photo is optional.

OPG top guard

The OPG top guard securely protects the
Safety Features
operator's cab and conforms to the ISO Seat with headrest fully reclined
standard.
Single sheet fixed glass Pressurized Cab Engine/pump
room partition
The glass installed in the machine has The optional air conditioner, air filter, and a
excellent visibility since it is laminated to higher internal air pressure (10 mm Aq
prevent shortening and has less vibration.
0.4" in Aq) prevent external dust from
See-through skylight equipped with a entering the cab.
sun shade
The upward visibility is excellent. Automatic Air Conditioner
Additional head lamp (Optional)
Night operation is safe. A 6,900 kcal air conditioner is Engine/pump room partition Step light with timer Thermal guards are placed Large handrails (standard) and
prevents oil from spraying on provides light for about one around high-temperature wide catwalk (optional) are pro-
Lower wiper (optional) utilized. The bi-level control function keeps
the engine if a hydraulic hose minute to allow the operator parts of the engine and vided around revolving frame for
Lower windshield wiper improves visibility the operator's head and feet cool and should burst. to get off the machine safely. accessory drive. easier and safer access to engine
in rain. warm respectively. This improved air flow and hydraulic components.
Horn interconnected with warning light function keeps the inside of the cab
(optional) give visual and audible notice comfortable throughout the year.
Warning light (optional) of the excavator’s operation when
activated. Photo may include optional equipment.
8 9

Courtesy of Machine.Market
 PC800-7
HYDRAULIC EXCAVATOR

S
SPECIFICATIONS
PECIFICATIONS
&&E EQUIPMENTIP
QUIPMENTIP-
BACKHOE DIMENSIONS

B
LIFTING CAPACITY

4245 13'11" 3195 10'6" PC800-7 A: Reach from swing center

R=4300 14'1" Equipment: B: Bucket hook height
● Boom: 8.04 m 26'5" C: Lifting capacity
● Arm: 3.6 m 11'10" Cf: Rating over front
B
● Bucket: 3.4 m3 4.45 yd3 Cs: Rating over side
C

3640 11'11"

840 2'9"
: Rating at maximum reach

4000 13'1"
3445 11'4"
with Heavy Lift On

1560 5'1"
ENGINE DRIVES AND BRAKES
HEAVY LIFTING "OFF" Unit: kg lb
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D140E-3 Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Type . . . . . . . . . . . . . . . . . . . . 4-cycle, water-cooled, direct injection Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fully hydrostatic A Maximum 9.0 m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
Aspiration . . . . . . . . . . . . . . . Turbocharged and air-to-air aftercooled Travel motor . . . . . . . . . . . . . . . . . Axial piston motor, in-shoe design B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs

2.0"
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Reduction system . . . . . . . . . . . . . . . . . . Planetary double reduction 4500 14'9" 610 24" 6.0 m *10550 9050 *11950 *11950 *14000 *14000 *17500 *17500

50
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 mm 5.51" Maximum drawbar pull . . . . . . . . . . . . . 559kN 57000 kg 125,660 lb 5810 19'1" 3500 11'6" 19' *23,200 20,000 *26,400 *26,400 *30,900 *30,900 *38,600 *38,600
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 mm 6.50" Gradability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70% 4110 13'6" 3.0 m 10100 7650 *14150 12050 *17700 16500 *24000 23400
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . 15.24 ltr 930 in3 Maximum travel speed 3390 11'1" 9' 22,300 16,800 *31,200 26,600 *39,100 36,300 *52,900 51,600
Flywheel horsepower . . . . . . . . . . . . . . 338 kW 454 HP @ 1800 rpm Low. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8 km/h 1.7 mph When retracted 0m 10250 7700 14450 11000 19600 14850 *25900 21300
PC800-7 PC800SE-7
(SAE J1349) High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 km/h 2.6 mph 0' 22,600 16,900 31,900 24,200 43,200 32,800 *57,100 47,000
8.04 m 26'5" boom 7.1 m 23'4" boom
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, electronic Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock –3.0 m 12700 9600 14250 10800 *18400 14650 *23550 21400 *30250 *30250 *28050 *28050
3.6 m 11'10" arm 2.9 m 9'8" arm –9' 28,000 21,100 31,500 23,800 *40,600 32,300 *51,900 47,200 *66,700 *66,700 *61,900 *61,900
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil disc brake
A Overall Height 4850 mm 15'11" 4615 mm 15'2" –6.0 m *12850 *12850 *15550 *15550
B Overall Length 13895 mm 45'7" 13030 mm 42'9" –19' *28,400 *28,400 *34,300 *34,300
HYDRAULIC SYSTEM
UNDERCARRIAGE HEAVY LIFTING "ON" Unit: kg lb
Type . . . . . . . . . . . . . . . . . . . . . . . Open-center load-sensing system
A Maximum 9.0 m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 2 Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-leg frame
Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
Main pump: WORKING RANGE Unit: mm ft in
Track chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed 6.0 m 11750 9050 *13850 13450 *16100 *16100 *19900 *19900
Type . . . . . . . . . . . . . . . . . . . . . . . Variable-capacity piston pumps 19' 25,900 20,000 *30,500 29,700 *35,500 *35,500 *43,900 *43,900
Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Pumps for. . . . . . . . Boom, arm, bucket, swing, and travel circuits 3.0 m 10100 7650 15600 12050 *20350 16500 *27400 23400
No. of shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 each side H PC800-7 PC800SE-7 9' 22,300 16,800 34,400 26,600 *44,900 36,300 *60,500 51,600
Maximum flow: No. of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 each side 14
13 Boom length 8040 mm 26'5" 7100 mm 23'4" 0m 10250 7700 14450 11000 19600 14850 28500 21300
Main . . . . . . . . . . . . . . . . . . . 2 x 494 ltr/min 2 x 130.5 U.S. gpm No. of track rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 each side
12
Arm length 3600 mm 11'10" 2945 mm 9'8" 3600 mm 11'10" 0' 22,600 16,900 31,900 24,200 43,200 32,800 62,900 47,000
11
Sub-pump for control circuit. . . . . . . . . . . . . . . . . . . . . . . Gear pump COOLANT AND LUBRICANT A Max. digging height 11955 mm 39'3" 11330 mm 37'2" 11055 mm 36'3" –3.0 m 12700 9600 14250 10800 19350 14650 *27050 21400 *34700 *34700 *31100 *31100
10
9 –9' 28,000 21,100 31,500 23,800 42,700 32,300 *59,700 47,200 *76,500 *76,500 *68,600 *68,600
Hydraulic motors: CAPACITY (REFILLING) B Max. dumping height 8235 mm 27'0" 7525 mm 24'8" 7430 mm 24'5"
8 –6.0 m *15150 *15150 *18250 *18250
Travel . . . . . . . . . . . . . . . 2 x axial piston motor with parking brake 7 C Max. digging depth 8445 mm 27'8" 7130 mm 23'5" 7790 mm 25'7"
–19' *33,400 *33,400 *40,200 *40,200
Swing . . . . . . . . . . 2 x axial piston motor with swing holding brake Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . 880 ltr 232.5 U.S. gal A 6
D Max. vertical wall
Radiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 ltr 22.5 U.S. gal 5 5230 mm 17'2" 4080 mm 13'5" 4260 mm 14'0" *Load is limited by hydraulic capacity rather than tipping. Ratings are based on Standard No. J1097. Rated loads do not exceed 87% of hydraulic capacity or 75% of tipping load.
B
digging depth
Relief valve setting: Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 ltr 14.5 U.S. gal 4
3 E Max. digging depth A
Implement circuits . . . . . . . . . . . 31.4 MPa 320 kg/cm2 4,550 psi Final drive, each side . . . . . . . . . . . . . . . . . . . 20 ltr 5.3 U.S. gal 8310 mm 27'3" 6980 mm 22'11" 7680 mm 25'2"
2 of cut for 8' level
Travel circuit . . . . . . . . . . . . . . . 34.3 MPa 350 kg/cm2 4,980 psi Swing drive . . . . . . . . . . . . . . . . . . . . . . 24.5 x 2 ltr 6.5 x 2 U.S. gal 1
F Max. digging reach 13660 mm 44'10" 12265 mm 40'3" 12710 mm 41'8"
PC800SE-7 A: Reach from swing center
Swing circuit . . . . . . . . . . . . . . . 28.4 MPa 290 kg/cm2 4,120 psi Equipment: B: Bucket hook height
Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . 440 ltr 116.2 U.S. gal 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
G Max. digging reach
Heavy lift circuit . . . . . . . . . . . . . 34.3 MPa 350 kg/cm2 4,980 psi
1
13400 mm 44'0" 11945 mm 39'2" 12400 mm 40'8" ● Boom: 7.1 m 23'4" C: Lifting capacity
2 at ground level
Pilot circuit . . . . . . . . . . . . . . . . . . 2.9 MPa 30 kg/cm2 430 psi D 3 ● Arm: 2.9 m 9'8" Cf: Rating over front
E 4
H Min. swing radius 5985 mm 19'8" 5645 mm 18'6" 5440 mm 17'10" B Cs: Rating over side
OPERATING WEIGHT C C ● Bucket: 4.3 m3 5.62 yd3
Hydraulic cylinders: (APPROXIMATE) 5
Bucket digging force (SAE)
316 kN 391 kN 316 kN : Rating at maximum reach
Number of cylinders—bore x stroke 6 32200 kgf / 70,990 lb 39900 kgf / 87,960 lb 32200 kgf / 70,990 lb
PC800-7: Operating weight, including 8040 mm 26'5" boom, 3600 7
Boom . . . . . . . . . . . . . . . . 2 – 200 mm x 1950 mm 7.9" x 76.8" 285 kN 331 kN 285 kN
mm 11'10" arm, SAE heaped 3.4 m3 4.45 yd3 backhoe bucket, opera- 8 Arm crowd force (SAE)
Arm . . . . . . . . . . . . . . . . . 2 – 185 mm x 1610 mm 7.3" x 63.4" 9 29100 kgf / 64,150 lb 33800 kgf / 74,520 lb 29100 kgf / 64,150 lb HEAVY LIFTING "OFF" Unit: kg lb
tor, lubricant, coolant, full fuel tank, and the standard equipment. 10
363 kN 431 kN 363 kN
Bucket 11 Bucket digging force (ISO) A Maximum 9.0 m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
2440 8ft 37000 kgf / 81,570 lb 43900 kgf / 96,780 lb 37000 kgf / 81,570 lb
Std . . . . . . . . . . . . . . . . . . 1 – 185 mm x 1820 mm 7.3" x 71.7" PC800SE-7: Operating weight, including 7100 mm 23'4" boom, 2945 G 298 kN 341 kN 298 kN B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
SE . . . . . . . . . . . . . . . . . . 1 – 225 mm x 1420 mm 8.9" x 55.9" mm 9'8" arm, SAE heaped 4.3 m3 5.62 yd3 backhoe bucket, operator, Arm crowd force (ISO)
F 30400 kgf / 67,020 lb 34800 kgf / 76,720 lb 30400 kgf / 67,020 lb 6.0 m *13250 11950 *13450 12800 *15250 *15250 *18500 *18500
lubricant, coolant, full fuel tank, and the standard equipment. 19' *29,200 26,400 *29,600 28,200 *33,700 *33,700 *40,800 *40,800
3.0 m 13000 9950 *15200 11950 *18750 16700 *25000 24300
SWING SYSTEM 9' 28,600 21,900 33,500 26,300 *41,300 36,800 *55,100 53,500
PC800-7 PC800SE-7
BACKHOE BUCKET, ARM, AND BOOM COMBINATION 0m 13550 10300 14750 11250 20200 15450 *26850 22450 *27200 *27200
Driven method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic motor Operating Ground Operating Ground 0' 29,800 22,700 32,500 24,800 44,600 34,100 *59,200 49,500 *59,900 *59,900
Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear Shoes Weight Pressure Weight Pressure BUCKET CAPACITY (HEAPED) WIDTH
Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed –3.0 m *15650 14250 *17200 15550 *22850 22750 *29600 *29600 *37150 *37150
125 kPa 123 kPa Without Side With Side WEIGHT –9' *34,500 31,400 *37,900 34,300 *50,300 50,200 *65,300 *65,300 *81,900 *81,900
Swing lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil disc brake 610 mm 76070 kg 75570 kg
1.27 kgf/cm2 1.25 kgf/cm2 SAE, PCSA CECE shrouds shrouds (with side shrouds) ARM LENGTH
Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.8 rpm 24" 167,700 lb 166,600 lb HEAVY LIFTING "ON" Unit: kg lb
18.1 psi 17.8 psi m3 yd3 m3 yd3 mm in mm in kg lb m ft in
108 kPa 107 kPa 2 PC800-7 (use with 8.04 m boom) 3.6 11'10" A Maximum 9.0 m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
710 mm 76870 kg 76370 kg
1.10 kgf/cm2 1.09 kgf/cm 3.4 4.45 3.0 3.92 1820 71.7" 1870 73.6" 3500 7,720 嘷
28" 169,470 lb 168,370 lb B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
15.6 psi 15.5 psi
PC800SE-7 (use with 7.1 m boom) 2.9 9'8" 3.6 11'10" 6.0 m *15300 11950 *15550 12800 *17500 *17500 *21050 *21050
19' *33,800 26,400 *34,200 28,200 *38,600 *38,600 *46,400 *46,400
4.0* 5.23 3.5 4.58 2000 78.7" 2105 82.9" 4000 8,820 嘷 嘷
4.0 5.23 3.5 4.58 2000 78.7" 2105 82.9" 3435 7,570 嘷 — 3.0 m 13000 9950 15450 11950 *21450 16700 *28400 24300
4.3 5.62 3.8 4.97 2150 84.6" 2255 88.8" 3870 8,530 嘷 — 9' 28,600 21,900 34,100 26,300 *47,300 36,800 *62,700 53,500
4.5 5.87 4.0 5.23 2230 87.8" 2330 91.9" 4050 8,930 䡺 — 0m 13550 10300 14750 11250 20200 15450 29750 22450 *30200 *30200
0' 29,800 22,700 32,500 24,800 44,600 34,100 65,600 49,500 *66,600 *66,600
These charts are based on over-side stability with fully loaded bucket at maximum reach. *For heavy duty
–3.0 m *18150 14250 *19850 15550 *26200 22750 *33850 *33850 *42600 *42600
嘷: General purpose use, density up to 1.8 t/m3 3,000 lb/yd3 䡺 : General purpose use, density up to 1.5 t/m3 2,500 lb/yd3 –9' *40,000 31,400 *43,800 34,300 *57,800 50,200 *74,700 *74,700 *93,900 *93,900
—: Not useable
*Load is limited by hydraulic capacity rather than tipping. Ratings are based on Standard No. J1097. Rated loads do not exceed 87% of hydraulic capacity or 75% of tipping load.

10 11 12

Courtesy of Machine.Market
Powered by TCPDF (www.tcpdf.org)