STANDARD EQUIPMENT

ENGINE CAB & CONTROL

Engine, HINO J08E, Diesel engine with turbocharger and Two control levers, pilot-operated
intercooler Tow eyes
Automatic engine deceleration Horn, electric
Auto Idle Stop (AIS) Integrated left-right slide-type control box
Batteries (2 x 12V - 96Ah) Cab, all-weather sound suppressed type
Starting motor (24V - 5 kW), 50 amp alternator Cab light (interior)
Removable clean-out screen for radiator Luggage tray
Automatic engine shut-down for low engine oil pressure Large cup holder
Engine oil pan drain valve Detachable two-piece floor mat
Double element air cleaner 7-way adjustable suspension seat
CONTROL Retractable seatbelt
Working mode selector (H-mode and S-mode) Headrest Hydraulic Excavators
Power Boost Handrails
SWING SYSTEM & TRAVEL SYSTEM Heater and defroster
Swing rebound prevention system Intermittent windshield wiper with double-spray washer
Straight propel system Skylight
Two-speed travel with automatic shift down Tinted safety glass
Sealed & lubricated track links Pull-type front window and removable lower front window
Grease-type track adjusters Easy-to-read multi-display monitor
Automatic swing brake Automatic air conditioner
HYDRAULIC Emergency escape hammer
Arm regeneration system Travel alarm
Auto warm up system
Aluminum hydraulic oil cooler
MIRRORS & LIGHTS Bucket Capacity:
Two rearview mirrors
Two front working lights
1.2 – 2.3 m3 ISO heaped
Engine Power:
209 kW {284 PS}/2,100 min-1{rpm}
(ISO14396)
OPTIONAL EQUIPMENT Operating Weight:
Wide range of buckets Additional hydraulic circuit 33,700 kg – SK330
Arm rest
Various optional arms
Wide range of shoes Additional counterweight
34,400 kg – SK350LC
Additional track guide Multi-control valve

Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines
with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require.
Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.

Inquiries To:
17-1, Higashigotanda 2-chome, Shinagawa-ku, Tokyo 141-8626 JAPAN
Tel: +81 (0) 3-5789-2146 Fax: +81 (0) 3-5789-2135
www.kobelco-kenki.co.jp/english_index.html

Bulletin No. SK330/SK350LC-MIDDLE EAST-201

2013040000 Printed in Japan
 The SK Series Concept of Beautiful Performance.

The Power Wave of Change

When we set out to design our new hydraulic excavators, we kept our eyes on the big picture.
Of course we wanted machines with greater diggin capacity.
But they also had to be fuel-efficient andeconomical, while imposing less of a burden on the local and global environments.
Applying our advanced technologies, we developed SK series,
an entirely new kind of excavator that beautifully balances all the demands of today’s construction industry.
Lean and efficient with capacity to spare, these sleek powerhouses bring a whole new style to the worksite while setting
new standards for environmental responsibility.

Pursuing the “Three E’s”

The Perfection of Next-Generation, Network Performance
Enhancement Economy Environment
Greater Performance Capacity Improved Cost Efficiency Features That Go Easy on the Earth
New hydraulic circuitry minimizes pressure loss Advanced power plant that reduces fuel Meets the latest exhaust emission standards
High-efficiency, electronically controlled consumption Auto Idle Stop as standard equipment
Common Rail Fuel Injection Engine Easy maintenance that reduces upkeep costs Noise reduction measures (with improvement of
Powerful travel and arm/bucket digging force High structural durability and reliability that the sound quality) minimize noise and vibration
retain machine value longer Photos in this catalog are the optional specs with 0.93 m3 bucket, 800 mm shoes, arm rock guard, and pre-air cleaner.
1 2
 Performance

Efficient Performance! NEXT-3E Technology

Next-Generation Electronic Engine Control
Simple Select:
Two Digging Modes
The high-pressure, common-rail fuel-injection engine features
Amazing Productivity with a 27 % Increase adjustable control to maximize fuel efficiency and provide
in Work Volume and “Top-Class” Cost-Performance powerful medium/low-speed torque. The result is a highly
fuel-efficient engine.
Work Volume *
H
27 % increase in work volume using For heavy duty when a higher
the same amount of fuel. H-Mode performance level is required.
(H-Mode) S For normal operations with lower
fuel consumption.
S-Mode
Fuel Consumption*

18 %
decrease in fuel consumption
even when performing more Optional N&B (crusher and breaker)
The operator selects the desired mode from
work volume. (S-Mode) inside the cab, and the selector valve
automatically configures the machine accord-
ingly.
“Top-Class” Powerful Digging
Max. arm crowding force:
165 kN {16.8 tf} Optional Attachment Mode Selector Switch
There’s a choice of three different hydraulic
circuits, to accommodate bucket, crusher or
Max. arm crowding force
with power boost: 181 kN {18.5 tf} breaker, and the desired attachment mode
can be selected with a switch, which
automatically configures the selector valve.

222 kN {22.6 tf}

All attachment modes can be used in either
Max. bucket digging force: S-mode or H-mode.

Max. bucket digging force

with power boost: 244 kN {24.9 tf}
Powerful Travel
Travel torque: increased by
13 %
Drawbar pulling force:
322 kN {32.8 tf} Seamless, Smooth Combined
Operations
The SK machines have inherited the various
Greater Swing Power, Shorter Cycle Times systems that make inching and combined

7%
operations easy and accurate, with further
refinements that make a good thing even
Swing torque: increased by better. Leveling and other combined opera-

16 %
tions can be carried out with graceful ease.
Swing speed: Electronic Active Control System
faster (10.0 min-1) Arm regeneration system
Boom lowering system
Variable swing priority system
Significant Extension of Continuous Working Hours Swing rebound prevention system

The combination of a large-capacity fuel Fuel tank:

tank and excellent fuel efficiency delivers
an impressive 22 % increase in continuous 580L NEXT-3E Technology New Hydraulic System

22 %
operation hours.** Rigorous inspections for
pressure loss are performed
on all components of the
hydraulic piping, from the first
spool of the control valve to
Light Lever Operation the connectors. This
NEXT-3E Technology
Total Tuning Through Advanced ITCS Control
10 % regimen, combined with the
It takes 10% less effort to move the e
control levers, so that operators can use of a new, high-efficiency
The next-generation engine control is governed by a new

Less
work longer hours with less fatigue. pump, cuts energy loss to a
version of ITCS, which responds quickly to sudden changes in
minimum.
hydraulic load to ensure that the engine runs as efficiently as
possible with a minimum of wasted output.
*The value shows results from actual measurements taken by KOBELCO when compared with previous KOBELCO models. ITCS (Intelligent Total Control System)
**The value shows results from actual measurements taken by KOBELCO for continuous operation in S Mode, compared with previous models. is an advanced, computerized system that provides comprehensive
Results vary depending on the method of operation and load conditions. control of all machine functions.

3
 Reliability, Durability, Environmental Responsibility

The Value and Quality of Sturdy Construction! Emergency Acceleration (Dial) Permits
Continued Operation in the Unlikely Event of
Designed for the Environment and
the Future!
Malfunction
Stable Attachment Strength Auto Idle Stop Provided as Standard Equipment
If unexpected trouble is experienced
Forged and cast components are used throughout. The arm with the ITCS mechatronic control
tip's cross-sectional coefficient is 35 % higher that previous system, the machine can still be
models, giving the arm the same strength as the 3-faced operated using the emergency
reinforced arm that was offered only as an option before. The acceleration system. Digging modes
strength of the boom foot has also been increased by 19.6 %. are also automatically relayed to an 12 sec
emergency system so that digging
can continue temporarily until a
service person arrives to repair the
Pre-air Cleaner (optional) primary system.
The optional pre-air cleaner
prolongs a replacement cycle of Engine throttle
main air cleaner. Integrated cast steel
boom top Mechatronic
Engine
controller
HD boom
Pump

ENGINE ECU
Emergency acceleration This function saves fuel and cuts emissions by shutting down
the engine automatically when the machine is on stand by. It
also stops the hourmeter, which helps to retain the machine’s
Newly designed MCU asset value.
Vertical alignment and sealed
cover gives better protection from
water and dust
Automatic Acceleration/Deceleration Function
Integration in base plate boosts Reduces Engine Speed
assembly quality
Reliable fixture to base plate Engine speed is automatically
reduced when the control lever is
placed in neutral, effectively saving Lever Off (Neutral)

Engine Speed
New MCU Conventional fuel and reducing noise and exhaust
MCU emissions. The engine quickly
Forged steel returns to full speed when the lever
arm foot boss Countermeasures Against Electrical System Failure is moved out of neutral.
Lever On
All elements of the electrical system, including controller, have been
Cast steel boom foot boss
HD arm designed for enhanced reliability. Lever Stroke

Large-Capacity Pump Resists Overheating

The pump capacity has been Low Noise Level and Mild Sound Quality
22 % increased by
compared with
previous models.
The electronically controlled common-rail engine has a unique
fuel injection system that runs quietly. Also, the hydraulic pumps
have been redesigned to produce a more pleasant sound
during pressure relief. In short, the SK series meets all require-
ments cited in latest EU stage II.

Meets EMC (Electromagnetic Compatibility)

Reinforced arm Standards in Europe.
Measures have been taken to ensure that the SKmachines do
not cause electro-magnetic interference.

Enhanced Upper Carbody Strength Durability That Retains Machine Value

The structure of the lower portion of the upper Five and Ten Years in the Future
frame has been reassessed and the undercover New operator’s seat covered in durable, material
area has been minimized for further strength. High-quality urethane paint
Easily repaired bolted hand rails

5 6
 Maintenance

“On the Ground” Maintenance! Access through the left side cover Highly Durable Super-fine Filter
The high-capacity hydraulic oil filter incorpo-
rates glass fiber with superior cleaning power
and durability. With a replacement cycle of
Comfortable "On the Ground" Maintenance Parallel Cooling Units Are Easy to Clean 1,000 hours and a construction that allows
replacement of the filter element only, it’s
The machine layout both highly effective and highly economical.
was designed with easy
inspection and mainte-
nance in mind.
1
Super-fine filter

Double-Element Air Cleaner as Standard

The large-capacity element features a
Radiator double-filter structure that keeps the
Oil cooler
engine running clean even in dusty
Air conditioner Intercooler environments.
condenser Air cleaner (double element)

Access through the right side cover 3

4 Monitor Display with Essential Information for
A new fuel filter has been installed that can handle
the most punishing conditions. It now has two pre-fuel 5 Accurate Maintenance Checks
filters (with built-in water separators), and a high- 6
Displays only the maintenance information that’s
grade main fuel filter with an ultra-fine 2 micron mesh needed, when it’s needed.
that removes 95% of dust and other impurities in the Self-diagnostic function that provides early-
7 warning detection and display of electrical system
fuel. malfunctions.
Record previous breakdowns, including irregular
2 and transient malfunctions.

Choice of 16 Languages for Monitor Display

With messages including those requiring
urgent action displayed in the local
8
language, users in all parts of the world
can work with greater peace of mind.
Main fuel filter Engine Oil Filter Main fuel filter
Pre-fuel filter
(with built-in water separators)

Quick Oil Drain Valves for Quick Maintenance Chinese German English English (US)

1 A quick drain valve, which requires no

tools, is provided as standard equipment.
French Indonesian ISO Italian

Quick drain valve Japanese Malay Myanmar(Brumese) Portuguese

2 To facilitate fuel tank cleaning, the fuel drain
valve was made larger and fitted with a
flange on the bottom.
Spanish Tamil Thai Vietnamese

Fuel drain valve

More Efficient Maintenance Inside the Cab

3 4 5 6 7 8
Drain Detachable
type

Detachable two- Easy-access fuse Air conditioner filter Hour meter can be Large-capacity tool Special crawler frame design is easily
piece floor mat with box. More finely can be easily checked while box can hold up to cleaned of mud.
handles for easy re- differentiated fuses removed without standing on the three pails.
moval. A floor drain make it easier to tools for cleaning. ground.
is located under the locate malfunctions.
mat.

7 8
 Comfort and Safety

Designed from the Newly Designed Information Display Prioritizes

Visual Recognition
Imagining Possible Scenarios
and Preparing in Advance
Operator’s Point of View The analog gauge provides information that’s easy to read
regardless of the operating environment. The information
display screen has been enlarged, and a visor is attached to
Bracket for Attaching a Head Guard Provided as
Standard Equipment
further enhance visibility.
A bracket is provided as standard equipment
that allows the optional head guard to be
Wide Field of View Liberates the Operator simply bolted on.
The front field of view easily clears ISO standards, while the
peripheral view reduces blind spots to a minimum.

Safety Features That Take Various Scenarios into

Consideration

Firewall separates the pump Hammer for emergency exit

compartment from the engine

A long wiper covers a wide area for a broad view in bad weather.
Back mirrors provide a safe view of the rear.
Reinforced green glass windows meet European standards.

Wide-Access Cab
Ensures Smooth Entry Travel alarm
and Exit
The left control box lifts up
with the safety lock lever to
+35mm Thermal guard prevents contact with hot components during engine
inspections
add 10° to the cab entry Hand rails meet European standards
Retractable seatbelt requires no manual adjustment
angle for easy entrance
and exit.

10°
Photo includes optional pedals for N&B and rotation.

Plenty of Foot Room Creating a Comfortable Operating Environment

With a total width of 1,005 mm, the cab has 35 mm more front
to-back foot room than previous models. The travel pedal is
larger for greater operator comfort.

Reduced Vibration for Fatigue-Free Operation

Double slide seat Powerful automatic air Spacious luggage tray
The rigid cab construction and liquid-filled viscous cab mounts conditioner
minimize cab vibration. In addition, the use of new lower rollers New interior design and
on the crawlers cuts travel vibration in half compared with materials create an ele-
previous models. gant feel

In-Cab Noise is Reduced by 3dB Compared with

Previous Models. Seat can be reclined to horizontal position One-touch lock release Large cup holder
simplifies opening and
closing the front window

9 10
 Specifications

Engine Travel System Working Ranges

Unit: m
Model HINO J08E Travel motors: 2 X axial-piston, two-step motors Boom 6.5 m
Direct injection, water-cooled, 4-cycle diesel Travel brakes: Hydraulic brake per motor Arm Short Standard Long
Type: Range 2.6 m 3.3 m 4.15 m
engine with turbocharger, intercooler Parking brakes: Oil disc brake per motor
a - Max. digging reach 10.61 11.26 11.97
No. of cylinders: 6 45 each side (SK330) b - Max. digging reach
Travel shoes: 10.4 11.06 11.79
Bore and stroke: 112 mm X 130 mm 48 each side (SK350LC) at ground level
Displacement: 7.684 L Travel speed: 5.6/3.3 km/h c- Max. digging depth 6.86 7.56 8.41
209 kW/2,100 min-1 (ISO14396:2002) d- Max. digging height 10.26 10.58 10.7
Drawbar pulling force: 322 kN (ISO7464)
Rated power output: e- Max. dumping clearance 7.06 7.37 7.53
197 kW/2,100 min-1 (ISO9249:2007)* Gradeability: 70 % {35°} f- Min. dumping clearance 3.32 2.62 1.77
998 N•m/1,600 min-1 (ISO14396:2002) Ground clearance: 500 mm g - Max. vertical wall
Max. torque: 5.84 6.61 7.15
969 N•m/1,600 min-1 (ISO9249:2007)* digging depth
*Previous indication h - Min. swing radius 4.45 4.37 4.43
i - Horizontal digging stroke
Cab & Control at ground level
4.21 5.82 7.21

Hydraulic System j - Digging depth for 2.4 m (8')

flat bottom
6.67 7.4 8.27
Cab Bucket capacity ISO heaped m3 1.6 1.4 1.2
Pump All-weather, sound-suppressed steel cab mounted on the silicon-sealed
viscous mounts and equipped with a heavy, insulated floor mat. Digging Force (ISO 6015) Unit: kN (tf)
Two variable displacement pumps +
Type: Control Short Standard Long
1 gear pump Arm length
Two hand levers and two foot pedals for travel 2.6 m 3.3 m 4.15 m
Max. discharge flow: 2 X 294 L/min, 1 X 20 L/min
221 {22.5} 222 {22.6} 221 {22.5}
Relief valve setting Two hand levers for excavating and swing Bucket digging force
244 {24.9}* 244 {24.9}* 243 {24.8}*
Boom, arm and bucket: 34.3 MPa {350 kgf/cm2} Electric rotary-type engine throttle 205 {20.9} 165 {16.8} 140 {14.3}
Arm crowding force
Power Boost: 37.8 MPa {385 kgf/cm2} 225 {22.9}* 181 {18.5}* 154 {15.7}*
*Power Boost engaged.
Travel circuit: 34.3 MPa {350 kgf/cm2}
Swing circuit: 29.0 MPa {296 kgf/cm2} Boom, Arm & Bucket Short Arm
Standard Arm
Control circuit: 5.0 MPa {50 kgf/cm2}
Pilot control pump: Gear type Boom cylinders: 140 mm X 1,550 mm
Dimensions Long Arm

Unit: mm
Main control valves: 8-spool Arm cylinder: 170 mm X 1,788 mm Short Standard Long G Tail swing radius 3,500 3,500 3,500
Oil cooler: Air cooled type Bucket cylinder: 150 mm X 1,193 mm
Arm length
2.6 m 3.3 m 4.15 m Distance from center of
G’ 3,500 3,500 3,500
A Overall length 11,280 11,200 11,230 swing to rear end
Overall height SK330 3,730 3,730 3,730
B 3,640 3,420 3,590 H Tumbler distance
(to top of boom) SK350LC 4,050 4,050 4,050
Swing System Refilling Capacities & Lubrications C Overall width
SK330 3,200
I
Overall length SK330 4,650 4,650 4,650
SK350LC 3,200 of crawler SK350LC 4,980 4,980 4,980
D Overall height (to top of cab) 3,160 3,160 3,160 SK330 2,600 2,600 2,600
Swing motor: Axial-piston motor Fuel tank: 580 L J Track gauge
E Ground clearance of rear end* 1,190 1,190 1,190 SK350LC 2,600 2,600 2,600
Hydraulic; locking automatically when the Cooling system: 31.1 L F Ground clearance* 500 500 500 K Shoe width 600/800
Brake: Engine oil: 28.5 L
swing control lever is in the neutral position L Overall width of upperstructure 2,950 2,950 2,950
Parking brake: Hydraulic disc brake Travel reduction gear: 2 X 9.5 L * Without including height of shoe lug.
Swing speed: 10.0 min-1 {rpm} Swing reduction gear: 7.4 L
Tail swing radius: 3,500 mm 280 L tank oil level
Hydraulic oil tank: 353 L hydraulic system
Min. front swing radius: 4,370 mm

Attachments
Backhoe bucket and arm combination
Backhoe bucket
Use Normal digging Light-duty Heavy digging

Bucket capacity
ISO heaped m3
1.2 1.4 1.6 2.3 1.8 1.4 Operating Weight & Ground Pressure
Struck m3 0.84 1.0 1.2 1.84 1.4 1.0 In standard trim, with standard boom, 3.3 m arm, and 1.4 m3 ISO heaped bucket
With side cutter mm 1,240 1,420 1,570 1,930 — 1,390 Shaped Triple grouser shoes (even height)
Opening width Shoe width mm 600 800
Without side cutter mm 1,110 1,300 1,450 1,760 1,680 1,330
SK330 3,200 3,400
No. of bucket teeth 4 5 5 6 5 5 Overall width mm
SK350LC 3,200 3,400
Bucket weight kg 930 1,070 1,100 1,500 1,200 1,300
○ ○ ○
SK330 68 {0.70} 53 {0.54}
2.6 m short arm Ground pressure kPa (kgf/cm2)

○ ○ ○ ○
SK350LC 64 {0.66} 50 {0.51}
Combinations 3.3 m standard arm SK330 33,700 34,700
Operating weight kg
4.15 m long arm SK350LC 34,400 35,500
○ Recommended Loading only Not recommended
11 12
 Lifting Capacities

A - Reach from swing centerline to bucket hook SK350LC Standard Arm: 3.3 m Bucket: 1.4 m3 ISO heaped 1,070 kg Shoe: 600 mm
Rating over front
B - Bucket hook height above/below ground A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach
C - Lifting capacities in kilograms Radius
Rating over side or 360 degrees • Max. discharge pressure: 37.8 MPa (385 kgf/cm2) B
7.5 m kg *5,640 *5,640 *3,650 *3,650 8.05 m
6.0 m kg *5,840 *5,840 *3,600 *3,600 8.88 m
SK330 Standard Arm: 3.3 m Bucket: 1.4 m ISO heaped 1,070 kg Shoe: 600 mm
3
4.5 m kg *7,320 *7,320 *6,370 *6,370 *5,840 4,680 *3,690 *3,690 9.41 m
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach
3.0 m kg *12,590 *12,590 *11,730 *11,730 *8,630 *8,630 *7,070 6,160 *6,180 4,490 *3,920 *3,920 9.67 m
Radius
1.5 m kg *7,080 *7,080 *13,950 12,580 *9,850 8,190 *7,760 5,810 *6,530 4,310 *4,320 3,770 9.70 m
B
G. L. kg *10,760 *10,760 *10,390 *10,390 *15,020 11,930 *10,670 7,750 *8,270 5,540 *6,770 4,160 *4,980 3,820 9.49 m
7.5 m kg *5,640 *5,640 *3,650 *3,650 8.05 m
-1.5 m kg *15,190 *15,190 *14,890 *14,890 *15,030 11,720 *10,920 7,530 *8,430 5,390 *6,370 4,100 *6,070 4,080 9.02 m
6.0 m kg *5,840 *5,840 *3,600 *3,600 8.88 m
-3.0 m kg *20,200 *20,200 *20,250 *20,250 *14,170 11,790 *10,500 7,520 *8,040 5,390 *6,990 4,690 8.26 m
4.5 m kg *7,320 *7,320 *6,370 *6,370 *5,840 4,570 *3,690 *3,690 9.41 m
-4.5 m kg *16,970 *16,970 *12,270 12,080 *9,150 7,700 *7,250 6,030 7.10 m
3.0 m kg *12,590 *12,590 *11,730 *11,730 *8,630 *8,630 *7,070 6,030 *6,180 4,390 *3,920 3,830 9.67 m
-6.0 m kg *8,560 *8,560 *7,090 *7,090 5.29 m
1.5 m kg *7,080 *7,080 *13,950 12,320 *9,850 8,010 *7,760 5,680 6,110 4,200 *4,320 3,680 9.70 m
G. L. kg *10,390 *10,390 *15,020 11,670 *10,670 7,570 7,930 5,410 5,960 4,050 *4,980 3,720 9.49 m
-1.5 m kg *10,760 *10,760 *14,890 *14,890 *15,030 11,460 *10,920 7,360 7,770 5,260 5,890 3,990 5,870 3,980 9.02 m SK350LC Standard Arm: 3.3 m Bucket: 1.4 m3 ISO heaped 1,070 kg Shoe: 800 mm
-3.0 m kg *15,190 *15,190 *20,250 *20,250 *14,170 11,530 *10,500 7,340 7,770 5,260 6,740 4,580 8.26 m A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach
-4.5 m kg *20,200 *20,200 *16,970 *16,970 *12,270 11,820 *9,150 7,530 *7,250 5,890 7.10 m
Radius
-6.0 m kg *8,560 *8,560 *7,090 *7,090 5.29 m B
7.5 m kg *5,640 *5,640 *3,650 *3,650 8.05 m
6.0 m kg *5,840 *5,840 *3,600 *3,600 8.88 m
SK330 Standard Arm: 3.3 m Bucket: 1.4 m ISO heaped 1,070 kg Shoe: 800 mm
3
4.5 m kg *7,320 *7,320 *6,370 *6,370 *5,840 4,840 *3,690 *3,690 9.41 m
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach
3.0 m kg *12,590 *12,590 *11,730 *11,730 *8,630 *8,630 *7,070 6,360 *6,180 4,660 *3,920 *3,920 9.67 m
Radius
1.5 m kg *7,080 *7,080 *13,950 12,980 *9,850 8,460 *7,760 6,010 *6,530 4,470 *4,320 3,920 9.70 m
B
G. L. kg *10,390 *10,390 *15,020 12,330 *10,670 8,020 *8,270 5,740 *6,770 4,320 *4,980 3,970 9.49 m
7.5 m kg *5,640 *5,640 *3,650 *3,650 8.05 m
-1.5 m kg *10,760 *10,760 *14,890 *14,890 *15,030 12,120 *10,920 7,800 *8,430 5,600 *6,370 4,260 *6,070 4,240 9.02 m
6.0 m kg *5,840 *5,840 *3,600 *3,600 8.88 m
-3.0 m kg *15,190 *15,190 *20,250 *20,250 *14,170 12,190 *10,500 7,790 *8,040 5,590 *6,990 4,870 8.26 m
4.5 m kg *7,320 *7,320 *6,370 *6,370 *5,840 4,730 *3,690 *3,690 9.41 m
-4.5 m kg *20,200 *20,200 *16,970 *16,970 *12,270 *12,270 *9,150 7,970 *7,250 6,250 7.10 m
3.0 m kg *12,590 *12,590 *11,730 *11,730 *8,630 *8,630 *7,070 6,230 *6,180 4,550 *3,920 *3,920 9.67 m
-6.0 m kg *8,560 *8,560 *7,090 *7,090 5.29 m
1.5 m kg *7,080 *7,080 *13,950 12,710 *9,850 8,280 *7,760 5,880 6,340 4,360 *4,320 3,820 9.70 m
G. L. kg *10,390 *10,390 *15,020 12,060 *10,670 7,840 8,220 5,610 6,180 4,210 *4,980 3,870 9.49 m
-1.5 m kg *10,760 *10,760 *14,890 *14,890 *15,030 11,850 *10,920 7,620 8,060 5,460 6,120 4,150 *6,070 4,140 9.02 m
-3.0 m kg *15,190 *15,190 *20,250 *20,250 *14,170 11,920 *10,500 7,610 *8,040 5,460 *6,990 4,750 8.26 m
-4.5 m kg *20,200 *20,200 *16,970 *16,970 *12,270 12,220 *9,150 7,790 *7,250 6,100 7.10 m SK350LC Long Arm: 4.15 m Bucket: 1.2 m3 ISO heaped 930 kg Shoe: 600 mm
-6.0 m kg *8,560 *8,560 *7,090 *7,090 5.29 m A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach
Radius
B
7.5 m kg *2,830 *2,830 8.85 m
6.0 m kg *4,670 *4,670 *2,780 *2,780 9.62 m
SK330 Long Arm: 4.15 m Bucket: 1.2 m3 ISO heaped 930 kg Shoe: 600 mm
4.5 m kg *5,630 *5,630 *5,220 4,780 *2,850 *2,850 10.11 m
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach
3.0 m kg *15,930 *15,930 *10,040 *10,040 *7,650 *7,650 *6,390 6,280 *5,640 4,550 *3,020 *3,020 10.35 m
Radius
1.5 m kg *12,530 *12,530 *12,620 *12,620 *9,030 8,350 *7,180 5,870 *6,090 4,310 *3,310 *3,310 10.38 m
B
G. L. kg *6,110 *6,110 *11,720 *11,720 *14,280 12,010 *10,090 7,780 *7,830 5,520 *6,460 4,110 *3,780 3,320 10.18 m
7.5 m kg *2,830 *2,830 8.85 m
-1.5 m kg *9,500 *9,500 *14,260 *14,260 *14,880 11,560 *10,650 7,440 *8,210 5,300 *6,630 3,980 *4,520 3,500 9.74 m
6.0 m kg *4,670 *4,670 *2,780 *2,780 9.62 m
-3.0 m kg *12,990 *12,990 *18,060 *18,060 *14,560 11,470 *10,620 7,310 *8,160 5,210 *6,310 3,960 *5,830 3,930 9.04 m
4.5 m kg *5,630 *5,630 *5,220 4,670 *2,850 *2,850 10.11 m
-4.5 m kg *16,880 *16,880 *19,250 *19,250 *13,300 11,640 *9,830 7,390 *7,430 5,290 *6,700 4,820 8.00 m
3.0 m kg *15,930 *15,930 *10,040 *10,040 *7,650 *7,650 *6,390 6,150 *5,640 4,440 *3,020 *3,020 10.35 m
-6.0 m kg *15,020 *15,020 *10,720 *10,720 *7,800 7,710 *7,000 6,920 6.46 m
1.5 m kg *12,530 *12,530 *12,620 *12,620 *9,030 8,170 *7,180 5,740 *6,090 4,210 *3,310 3,230 10.38 m
G. L. kg *6,110 *6,110 *11,720 *11,720 *14,280 11,750 *10,090 7,600 *7,830 5,390 5,910 4,000 *3,780 3,230 10.18 m
-1.5 m kg *9,500 *9,500 *14,260 *14,260 *14,880 11,310 *10,650 7,260 7,680 5,170 5,780 3,870 *4,520 3,410 9.74 m SK350LC Long Arm: 4.15 m Bucket: 1.2 m3 ISO heaped 930 kg Shoe: 800 mm
-3.0 m kg *12,990 *12,990 *18,060 *18,060 *14,560 11,210 *10,620 7,140 7,590 5,080 5,760 3,860 5,710 3,830 9.04 m A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach
-4.5 m kg *16,880 *16,880 *19,250 *19,250 *13,300 11,380 *9,830 7,210 *7,430 5,160 *6,700 4,700 8.00 m
Radius
-6.0 m kg *15,020 *15,020 *10,720 *10,720 *7,800 7,530 *7,000 6,760 6.46 m B
7.5 m kg *2,830 *2,830 8.85 m
6.0 m kg *4,670 *4,670 *2,780 *2,780 9.62 m
SK330 Long Arm: 4.15 m Bucket: 1.2 m3 ISO heaped 930 kg Shoe: 800 mm
4.5 m kg *5,630 *5,630 *5,220 4,940 *2,850 *2,850 10.11 m
A 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At Max. Reach
3.0 m kg *15,930 *15,930 *10,040 *10,040 *7,650 *7,650 *6,390 *6,390 *5,640 4,710 *3,020 *3,020 10.35 m
Radius
1.5 m kg *12,530 *12,530 *12,620 *12,620 *9,030 8,620 *7,180 6,070 *6,090 4,480 *3,310 *3,310 10.38 m
B
G. L. kg *6,110 *6,110 *11,720 *11,720 *14,280 12,410 *10,090 8,050 *7,830 5,730 *6,460 4,270 *3,780 3,460 10.18 m
7.5 m kg *2,830 *2,830 8.85 m
-1.5 m kg *9,500 *9,500 *14,260 *14,260 *14,880 11,960 *10,650 7,700 *8,210 5,500 *6,630 4,140 *4,520 3,650 9.74 m
6.0 m kg *4,670 *4,670 *2,780 *2,780 9.62 m
-3.0 m kg *12,990 *12,990 *18,060 *18,060 *14,560 11,870 *10,620 7,580 *8,160 5,410 *6,310 4,120 *5,830 4,090 9.04 m
4.5 m kg *5,630 *5,630 *5,220 4,830 *2,850 *2,850 10.11 m
-4.5 m kg *16,880 *16,880 *19,250 *19,250 *13,300 12,040 *9,830 7,660 *7,430 5,490 *6,700 5,010 8.00 m
3.0 m kg *15,930 *15,930 *10,040 *10,040 *7,650 *7,650 *6,390 6,350 *5,640 4,600 *3,020 *3,020 10.35 m
-6.0 m kg *15,020 *15,020 *10,720 *10,720 *7,800 *7,800 *7,000 *7,000 6.46 m
1.5 m kg *12,530 *12,530 *12,620 *12,620 *9,030 8,440 *7,180 5,930 *6,090 4,370 *3,310 *3,310 10.38 m
G. L. kg *6,110 *6,110 *11,720 *11,720 *14,280 12,140 *10,090 7,870 *7,830 5,590 6,140 4,160 *3,780 3,370 10.18 m
-1.5 m kg *9,500 *9,500 *14,260 *14,260 *14,880 11,700 *10,650 7,520 7,970 5,370 6,000 4,030 *4,520 3,550 9.74 m
Notes: 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed
-3.0 m kg *12,990 *12,990 *18,060 *18,060 *14,560 11,610 *10,620 7,400 7,870 5,280 5,980 4,020 *5,830 3,980 9.04 m 1. Do not attempt to lift or hold any load that is greater than these lift capacities at their 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an
-4.5 m kg *16,880 *16,880 *19,250 *19,250 *13,300 11,780 *9,830 7,480 *7,430 5,360 *6,700 4,880 8.00 m specified lift point radius and heights. Weight of all accessories must be deducted from the asterisk (*) are limited by hydraulic capacity rather than tipping load.
-6.0 m kg *15,020 *15,020 *10,720 *10,720 *7,800 7,800 *7,000 *7,000 6.46 m above lift capacities. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions
2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must before operating this machine. Rules for safe operation of equipment should be adhered to
make allowance for job conditions such as soft or uneven ground, out of level conditions, at all times.
side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by
3. Bucket lift hook defined as lift point. KOBELCO CONSTRUCTION MACHINERY CO., LTD.
13 14