VEGA - Indonesia Presentation
VEGA - Indonesia Presentation
VEGA - Indonesia Presentation
Rollers
Tyres
Rings
Segments
FACTORS INFLUENCING
GRINDING ELEMENTS DESIGN
market.
market.
DISADVANTAGES OF
HARDFACING
- Capacity drop
EFFECT OF NON - UNIFORM WEAR
ON OPERATION OF VRM
The uneven wear on the Grinding Elements in a VRM can have severe drawbacks
on the operation
• Loss of production
IMPACT • Due to Mill design • Provide Cushioning effect with the design
(I) • Solution with Soft Core and Very Hard
• Metal to Metal contact
• Hard foreign • Grinding face. AIAE Inserted Solution is the one
particles in the feed
CONVENTIONAL WEAR
RESISTANT ALLOYS – VEGA OFFERINGS
Alloy Carbon Chromium Hardness R.A Carbides
Cr Mo (V01) 0.5 - 0.8 % 1.5 - 2.5 % 30 - 40 Rc
V - 20 2.4 - 2.8 % 20 % 58 - 62 Rc 15 - 25 27 %
V - 16 2.8 - 3.2 % 16 % 62 - 65 Rc 15 - 25 32 %
- Inserted Sintercast®
• Mono casting
- High Chrome
- Composite ( Sintercast®)
• Hard Hi Cr inserts embedded in nodular iron • Hardness of high chrome on Inserts: 62-64Rc.
• Hardness of the Inserts: 60-64 Rc. • End Hardness of Composite Part: 2100 Hv
• Property of Sg Iron: Elongation close to 5%and • Property of Sg Iron: Elongation close to 5%and
Tensile Strength 500 MPS Tensile Strength 500 MPS
SINTERCAST SEGMENTS
TABLE SEGMENTS
Roller Tires & Table Liner Roller Tires & Table Liner
Customer has now fully shifted to Vega; and the sets delivering a life of 10000 hrs+ consistently
We have team of over 100 experts traveling all over the world for Technical Service requirements.
TECHNICAL SERVICES APPROACH RELATED
TO DRAWINGS AND INSTALLATION
• We have a full fledged drawing and design department with technically competent staff at
our works in Ahmedabad.
• All the latest accessories and latest software for the computers such as AutoCAD, Pro - E
are available.
• The service of our drawing office is available for our customers for developing the
drawings for different parts.