Evo 2600 Radar Gauge

evo 2600
Radar Gauge
evo 2600 Radar Gauge

The evo 2600 Radar Gauge is the latest product in
L&J Engineering’s new evolution series of radar level
gauges which are leading the industry with innovative
new features and benefits not found in other products.
The evo 2600 uses L&J’s latest and most technologically
advanced radar technology to deliver 3mm Accuracy in
a wide variety of applications at a competitive cost. The
evo 2600 uses FMCW (Frequency Modulated Continuous
Wave) technology operating in the 26GHz frequency
band to ensure that it delivers both accuracy and
reliability in a wide variety of level gauging applications.
This technology is designed, tested and manufactured
in the USA, ensuring a high quality and reliable product.
e.WAVE Display
An all new evolutionary feature of the evo 2600 is
the e.WAVE graphical LCD display. In case of special
applications or circumstances, the e.WAVE display
provides you with a graphical profile of your tank to
ensure there are no unforeseen obstructions of intrusions
in your level gauging applications. The e.WAVE will Features
allow you to fine tune the radar unit to cancel out any
obstructions or other disturbances in the tank. This is all • +/- 3mm Accuracy Standard
done with the MCG 2150 Remote Calibrator. Never
before has it been this easy to fine tune a radar gauge • 4-20ma Loop Powered
to operate in your specific environment. The e.WAVE
display also provides you with a vast array of information, • 26 GHz Frequency
including, but not limited to: level, temperature, discrete
status, and a magnitude of diagnostics. There is also • FMCW Technology
an optional ground level display which allows you to
program and setup the radar gauge at the side of the • e.WAVE Display
tank.
e.CAL Intuitive Setup Wizard
• e.CAL Intuitive Setup Wizard
The evo 2600 uses L&J’s e.CAL Intuitive Setup Wizard • Lightweight
to assure easy programming and setup of your radar
gauge in minutes. Once you enter programming mode Applications
with your MCG 2150 Remote Calibrator, the evo 2600’s
e.CAL mode is the first option displayed. Once entering Liquid level gauging of virtually any corrosive,
e.CAL, you will be asked to enter 5 values: units of contaminated or viscous product including;
measure, Datum level, max fill level, min fill level, and
seed level. The radar will then begin to profile the tank oil chemicals gasoline
and you will be up and gauging in less than 5 minutes! petrochemical molten sulfur pharmaceuticals
limestone rock polyethylene titanium dioxide
paraffin latex powder
and bulk
5911 Butterfield Road Hillside, IL 60162 • tel: (708) 236-6000 • fax: (708) 236-6006
sales@ljtechnologies.com • www.ljtechnologies.com • ISO 9001: 2008 Certified Rev: evo 2600-3C
1
evo 2600
Radar Gauge
Specifications:
Measuring Range: External Power Supply:
0-65 feet standard. 24VDC, 48VDC, 48VAC, 65VAC, 110VAC, 220VAC
Accuracy: Power Consumption:

+/- 3 mm (+/- 0.12 in) Loop Power 36 mW
Radar Frequency: Process Pressure:

26GHz FMCW Technology 150PSIG
Electronics Temperature: Process Connection:

-40º F to 150º F (-40º C to 66º C) 2” NPT
Process Temperature: Weight:

-148º F to 320º F (-100º C to 160º C) 2 lbs.
Digital Communications: Safety Approvals:

L&J Tankway FM/FMC: Class I, Div. 1, Groups B, C, D;
Other Protocols Available (See Ordering Guide) Class II, III, Div. 1, Groups E, F, G
(Ta = -40OC to 66OC)
Temperature Option:
Spot Temperature (3-Wire RTD) ATEX II 1/2 G Ex IIB T6 Ga/Gb (Ta = -40OC to 66OC)
Average Temperature II 1/2 D Ex IIIC T85C Db (Ta = -40OC to 66OC)
Local Display:
e.WAVE Graphical LCD Display
Dimensions
All designs subject to change. Certified dimensions and specifications available upon request.
Accessories
MCG 2150 MCG 1350M

Handheld Infrared Calibrator Ground Level Display
2
evo 2600
Radar Gauge
evo 2600 Radar Gauge Ordering Guide

evo 2600 Radar Gauge
MCG 2150 Remote Calibrator

(One Required)
Model Number Selection:
The model number will consist of a base number 2600 followed by 10 digits. These digits will represent 10 sets
of option tables:
evo 2600 - A - B - C - D - E - F - G - H - I - J
A - Approval D - Process Connection

1 FM / FMC 0 No Flange, 2” NPT Connection
2 CSA 1 2” 150# RF ANSI 316SS
3 ATEX 2 3” 150# RF ANSI 316SS
3 4” 150# RF ANSI 316SS
4 6” 150# RF ANSI 316SS
B - Housing Material
5 8” 150# RF ANSI 316SS
1 Aluminum
6 2” 300# RF ANSI 316SS
2 Stainless Steel
7 3” 300# RF ANSI 316SS
8 4” 300# RF ANSI 316SS
C - Antenna Options 9 6” 300# RF ANSI 316SS
0 No Antenna A 8” 300# RF ANSI 316SS
1 2” Conical Horn Antenna 316SS B 1.5” NPT Connection*

* evo 2600SW Required
2 3” Conical Horn Antenna 316SS
E - Digital Communication Protocol
0 None
1 L&J Tankway
6 Parabolic Antenna
2 GPE 31422, 31423
7 Float and Tape Gauge Replacement*
3 Varec 4-Wire (1800, 1900)
8 6” Hinged Hatch Mount Antenna
4 Modbus on L&J Tankway
* evo 2600SW Required
5 Modbus on RS 485 (2-Wire)
6 ENRAF
7 Fieldbus
A Ti-Way
B HART
C Saab TRL/2
D Profibus DP
E RGL / NMC
F Wireless (Explosion Proof)
3
evo 2600
Radar Gauge
F - Analog Output I - Ground Level Display*

0 None 0 No Ground Level Display Compatibility
1 Single 4-20mA Output 1 Ground Level Display Compatibility
2 Dual 4-20mA Outputs * Requires MCG 1350M Ground level Display.
G - Power J - Dry Contacts

1 24 VDC Loop Powered 0 None
2 24-48 VDC 1 1 Dry Contact
3 48 VAC 2 2 Dry Contacts
4 65 VAC
5 110 VAC
6 220 VAC
H - Temperature Inputs
0 No Temperature
1 Single Spot Temperature*
2 Average Temperature**
* Spot Temperature Ready. RTD Probe must be ordered separately.
** Requires MCG 2350 Average Temperature Assembly and Average
Temperature bulb.

Evo 2600 Radar Gauge

Uploaded by

Copyright:

Available Formats

Evo 2600 Radar Gauge

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Evo 2600 Radar Gauge

Uploaded by

Copyright:

Available Formats

evo 2600

evo 2600 Radar Gauge

Accuracy: Power Consumption:

Radar Frequency: Process Pressure:

Electronics Temperature: Process Connection:

Process Temperature: Weight:

Digital Communications: Safety Approvals:

MCG 2150 MCG 1350M

evo 2600 Radar Gauge Ordering Guide

MCG 2150 Remote Calibrator

Model Number Selection:

A - Approval D - Process Connection

0 No Antenna A 8” 300# RF ANSI 316SS

1 2” Conical Horn Antenna 316SS B 1.5” NPT Connection*

F - Analog Output I - Ground Level Display*

G - Power J - Dry Contacts

You might also like