Synopsis Mini Hydraulic Press

Mechanical Department
Class: - TYME
Academic Year 2020-21
Project Synopsis
Date: 21/04/2021
Student Names:
1) 4)
2) 5)
3)
Guide Name:
Project Title: Hydraulic press
Project Area:
A hydraulic press is a device (see machine press) using a hydraulic cylinder to generate a
compressive force. It uses the hydraulic equivalent of a mechanical lever, and was also known as
a Bramah press after the inventor, Joseph Bramah, of England. He invented and was issued a
patent on this press in 1795. A hydraulic press is a machine using a hydraulic cylinder to
generate a compressive force. Frame, hydraulic cylinder and press table are the main components
of the hydraulic press. Hence a hydraulic press is a machine that makes use of the pressure
exerted on the fluids to crush, straighten or mould. The concept of the hydraulic press is based on
Pascal's theory, which states that when pressure is applied on fluids in an enclosed system, the
pressure throughout the system always remains constant. In hydraulic press, the force generation,
transmission and amplification are achieved using fluid under pressure. The liquid system
exhibits the characteristics of a solid and provides a very positive and rigid medium of power
transmission and amplification. In a simple application, a smaller piston transfers fluid under
high pressure to a cylinder having a larger piston area, thus amplifying the force. There is easy
transmissibility of large amount of energy with practically unlimited force amplification.
Here we are fabricating the model for press operation and it’s known as hydraulic press
machine. Hydraulics is a topic in applied science and engineering dealing with the mechanical
properties of liquids. Fluid mechanics provides the theoretical foundation for hydraulics, which
focuses on the engineering uses of fluid properties. In fluid power, hydraulics is used for the
generation, control, and transmission of power by the use of pressurized liquids, here our system
to making of pressing operation. The hydraulic press depends on Pascal's principle: the pressure
throughout a closed system is constant. At one end of the system is a piston with a small cross-
sectional area driven by a lever to increase the force. Small-diameter tubing leads to the other
end of the system.
Literature Survey:
Using the optimum resources possible in designing the hydraulic press components can
effect reduction in the cost by optimizing the weight of material utilized for building the
structure. An attempt has been made in this direction to reduce the volume of material, cost of
the press and to make is portable. Ertl et al. presented a 2D nonlinear magneto-mechanical
analysis of an electromagnetic actuator based on finite elements. The presented method enables
the simulation of the complete switching cycle off a switching, short stroke solenoid actuators
with sufficient accuracy. This could be achieved by considering nonlinear magnetics, eddy
current induction and a physical correct implementation of the contact mechanics, which are
relevant for the complex dynamics of this valve types. Combining the concepts of pre-
magnetization as well as over excitation to optimize the actuator dynamics, the pure valve needle
flight time at valve opening can be reduced to 200ms. The developed numerical tools enable a
systematic study of several methods to optimize the dynamics. Pohl et al. presented a model of a
fast 2/2 switching valve where both the magnetic paths well as the spool assembly are modeled.
The model also includes a description of the hysteresis characteristics of the magnetic path. An
optimization strategy has been utilized in order to parameterize the model against measured data.
However, even for major deviations from the operational point used for the model adaptation, the
model predict s the valve response sufficiently accurately. The switching cycle was less than 10
ms.
Hydraulic Press is one of the oldest basic machine tools. In its modern form, is well
adapted to press work ranging from coining jewelry to forging aircraft parts. A hydraulic press is
a machine using a hydraulic cylinder to generate a compressive force. In this paper the
components like frame, cylinder, pillar and plates are designed by the design procedure. They are
analyzed to improve their performance and quality for press working operation. Using the
optimum resources possible in designing the hydraulic press components can effect reduction in
the cost by optimizing the weight of material utilized for building the structure. An attempt has
been made in this direction to reduce the volume of material. So in this paper consideration for
an industrial application consisting of mass minimization of H frame type hydraulic press.
The aim of this paper is to integrate the mechanical system of hydraulic press with
hydraulic system to facilitate the ease of operation to manufacture the smaller parts in a bulk. In
the present scenario, time constrain is a crucial part for completion of any production process.
Thus with the aid of atomization, the production time can be reduced as well as higher degree of
accuracy can be achieved as the human efforts will be alleviated. Thus an attempt has been made
to provide the smooth and rapid functioning of press work with the help of hydraulic system.
Problem Statement:
The problem in the pressing of small components like bearing, the machine is that it has
to be pressed on high capacity machine which required large amount of power supply, greater
pump capacity. Which increases the machine size, its initial as well as running cost.
Objective(s):
 To study the basic principal of the our project

 Describe the construction and working of various parts of our project
 Development of the working model of the our project
Proposed Methodology:
A hydraulic press is a machine that uses pressurized liquid to create force. These
machines are composed of a simple cylinder and piston mechanism. The press consists of a large
cylinder, with a large piston, and a small cylinder and a small piston. The large cylinder and the
small cylinder are connected to one another by means of a pipe. The two cylinders, and the pipe
connecting them, are filled with a liquid. At this point, the function of the hydraulic press
depends on Pascal's Principle.
Mini Hydraulic Press
Hydraulic jack
Spring
Supporting frame
Action Plan:
No Activity July Aug Sept Oct Jan Feb Mar Apr

1. Allotment of
Guide 
2. Project survey.  
3. Project and idea

Screening. 
4. Material selection

5. Design
 
6. Manufacturing
 
7. Testing
 
Guide Approval (Signature) Project Approval Committee

(Name & Signature)

Synopsis Mini Hydraulic Press

Uploaded by

Copyright:

Available Formats

Synopsis Mini Hydraulic Press

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Read this document in other languages

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Synopsis Mini Hydraulic Press

Uploaded by

Copyright:

Available Formats

Mechanical Department

Project Title: Hydraulic press

 To study the basic principal of the our project

No Activity July Aug Sept Oct Jan Feb Mar Apr

3. Project and idea

Guide Approval (Signature) Project Approval Committee

You might also like