Drive Technology \ Drive Automation \ System Integration \ Services

DLD Asynchronous Linear Motors

Edition 02/2009
16673212 / EN
Operating Instructions
SEW-EURODRIVE – Driving the world
 Content

1 Safety Notes ...................................................................................................... 4

1.1 Preliminary information ............................................................................ 5
2 Description of the Functions ........................................................................... 6
2.1 Structure ................................................................................................... 6
2.2 System description.................................................................................... 7
2.3 Scope of delivery ...................................................................................... 8
2.4 Size ........................................................................................................... 8
2.5 Nameplate................................................................................................. 9
2.6 Type code ................................................................................................. 9
3 Project Planning Information ......................................................................... 10
3.1 Calculating the feed thrust ...................................................................... 10
3.2 Drive selection ........................................................................................ 11
3.3 Speed monitoring and control ................................................................. 12
4 Installation/Assembly ..................................................................................... 14
4.1 Before you start....................................................................................... 14
4.2 Preliminary work after longer periods of storage .................................... 14
4.3 Installing the motor.................................................................................. 14
5 Electrical Installation ...................................................................................... 15
5.1 Before you start....................................................................................... 15
5.2 Connection via integrated IS plug connector .......................................... 15
5.3 Thermal motor protection........................................................................ 20
6 Startup.............................................................................................................. 21
6.1 Before you start....................................................................................... 21
7 Malfunctions .................................................................................................... 22
8 Technical Data................................................................................................. 23
8.1 Dimension sheet DLD 200-7 / DLD 400-6 / DLD 401-6 .......................... 23
8.2 Dimension sheet DLD 402-6 flat ............................................................. 24
8.3 Motor data primary................................................................................. 25
8.4 Motor data secondary ............................................................................ 26
8.5 Forced cooling fan .................................................................................. 27

Operating Instructions – DLD Asynchronous Linear Motors 3

 Safety Notes
1

1 Safety Notes
• Never operate defective or damaged products.
• Read this document thoroughly before you work with the product.
• Always observe the respective safety notes. They are structured as follows:

Always observe the safety and warning instructions in this publication.

Electrical hazard
Possible consequences: Severe or fatal injuries.

Hazard
Possible consequences: Severe or fatal injuries.

Hazardous situation
Possible consequences: Slight or minor injuries.

Harmful situation
Possible consequences: Damage to the unit and the environment.

Tips and useful information.

Warning:
Live and moving parts of electrical equipment can cause severe or fatal injury. In-
stallation, connection, startup, maintenance and repair work may only be carried
out by correspondingly trained employees observing
• these operating instructions
• any additional startup instructions and wiring diagrams regarding the drive
• applicable national/regional regulations

4 Operating Instructions – DLD Asynchronous Linear Motors

 Safety Notes
Preliminary information
1

1.1 Preliminary information

• You must observe these operating instructions and the corresponding notes as a
prerequisite for fault-free operation and fulfillment of any right to claim under warran-
ty.

• SEW-EURODRIVE produces and checks every motor according to the current tech-
nical specifications. The technical data and the structure may be subject to modifica-
tions according to the technical development.

• Check the delivery for damage caused during transport on receipt. Immediately re-
port any damage to the shipping company.

• If it is not to be installed straight away, store the motor in a dry, dust-free room.

• Disposal (observe the applicable waste disposal regulations)

Dispose of the primary and secondary parts in accordance with the material structure
observing the applicable waste deposit regulations for:
– Steel scrap
– Aluminum
– Copper
– Plastic

Cross reference in this document are marked with a → (" + section x.x" means: For more
information, refer to section x.x)

Operating Instructions – DLD Asynchronous Linear Motors 5

 Description of the Functions
2 Structure

2 Description of the Functions

2.1 Structure
The asynchronous linear motor basically consists of two parts, the primary and the sec-
ondary.

2.1.1 Primary
The electrically "active" primary consists of a laminated iron core with an AC winding.
Due to the shape of the laminated iron core, the primary is also referred to as "fanning
strip".

2.1.2 Secondary
As opposed to a rotating motors, the secondary consists of a massive plate (sword)
made of aluminum or copper.

2.1.3 No attraction forces in double fanning strip design

Apart from the thrust force FV, if a drive consists of a primary (P) and a secondary (S),
there also is an attractive force FD between the primary and secondary that directly de-
pends on the level for the thrust force. However, if you use two primary parts (double
fanning strip design, see right figure), both attractive forces cancel each other regarding
their effect on the secondary, and only the thrust force applies. This increases the effi-
ciency due to less friction, and reduces the apparent power requirement.

P FD P
FV FV
S
S
P

50229AXX

Oftentimes the primary is stationary and the secondary is mobile. This arrangement is
common for materials handling and sorting technology. Depending on the application,
the primary may also be mobile (e.g. drives for floor conveyors).

6 Operating Instructions – DLD Asynchronous Linear Motors

 Description of the Functions
System description
2

2.2 System description

The asynchronous linear motors from SEW are especially quiet and are used whenever
there are high demands on maintenance-free service life and speed. They are suitable
for many applications due to the minimum space requirements and the simple assem-
bly.
The following characteristics represent advantages of the asynchronous linear motors:
• No wear due to contactless energy transfer
• Action of force only in feed direction, secondary not exposed to overhung loads
• driveline not exposed to shock pulses
• very simple secondary made of aluminum or copper
• multiple motors can easily be interconnected in a single driveline
• very long travel distances can easily be realized
• low noise development

With the asynchronous DLD linear motors in conjunction with the MOVIDRIVE® invert-
ers, SEW provides the drive solution from one source

[1]

[2]

[3]

[4]

50047AXX
[1] Secondary made of aluminum or copper
[2] Primary in double fanning strip design
[3] Motor terminal box with integrated plug connector

Operating Instructions – DLD Asynchronous Linear Motors 7

 Description of the Functions
2 Scope of delivery

2.2.1 Design of the asynchronous DLD linear motor

The asynchronous DLD linear motor consists of two current-carrying primaries (double
fanning strip design) in one casting frame and a secondary provided by the customer.
In the double fanning strip design, the magnetic overhung loads between the primary
and the secondary are compensated. In order to achieve the nominal forces listed in
section "Technical Data" on page 23, you have to observe the reference requirements
specified in section "Secondary".
When de-energized, the asynchronous linear motor provides free-running characteris-
tics. An electric deceleration is possible, and due to the high slip, there are major restric-
tions regarding the use as positioning drive.

2.3 Scope of delivery

The scope of delivery comprises
• DLD.. primary with mounting frame, fans and IS plug connector

The secondary is not included in the scope of delivery.

2.4 Size
There are three sizes of primaries for the asynchronous linear motors:
• DLD 200-7
• DLD 400-6
• DLD 401-6
• DLD 402-6 Flat
SEW can also provide customized designs such as higher velocity and feed thrust levels
or a primary in single fanning strip design. Feel free to contact us for further information.

8 Operating Instructions – DLD Asynchronous Linear Motors

 Description of the Functions
Nameplate
2

2.5 Nameplate
Example

Bruchsal/Germany
Nr. 01.1268662301.0005.09 3 IEC 34

TypDLD401-6/TF/IS IP 00 Rt -20 ... +40°C

v 2.00 m/s F 280 N kW 0.56 S1
V 310 Hz 23.0 I.CI.F
A 9.0 p.f. 0.76 Kg 73
FAN 230V

Made in Germany 186 508 0.10

64823AXX

2.6 Type code

Example The type code for the asynchronous linear motor is structured as follows:

DLD - 400-6 / TF / IS

IS integrated plug connector

TF temperature sensor

200-7
Size 400-6
401-6
Asynchronous linear motor

03965AEN

Operating Instructions – DLD Asynchronous Linear Motors 9

 Project Planning Information
3 Calculating the feed thrust

3 Project Planning Information

3.1 Calculating the feed thrust
In order to be able to determine the drive power, you have to determine the forces oc-
curring during constant travel and acceleration.

The following formula is based on the assumption that the mobile part rolls on a wheel-
rail system.

Force at con-
stant travel

F = m x g x [ 2 x ( µ x d + f) + c]
F D 2

FF = force at constant travel [N] µ = bearing friction coefficient

m = total weight [kg] d = bearing journal diameter [mm]
g = gravitational constant [ms-2] f = lever arm of the rolling friction [mm]
D = carrying wheel diameter [mm] c = wheel flange and side friction coefficient

If the travel resistance is known, you can calculate the force during constant travel as
follows:
FF = m x fW
fW = travel resistance [N/kg]
m = total weight [kg]

Observe the side friction that especially occurs during cornering.

Keep in mind that the travel resistance after longer downtimes and with heavy
load can increase significantly as the wheels may have flattened.

Force of accelera- The force of acceleration can be calculated as follows:

tion FA = m x a

Maximum feed The maximum feed thrust is calculated using the following formula:
thrust FV = FF + FA
FV = maximum feed thrust [N] m = total weight [kg]
FA = force of acceleration [N] a = desired acceleration [ms-2]
FF = force at constant travel [N]

10 Operating Instructions – DLD Asynchronous Linear Motors

 Project Planning Information
Drive selection
3

3.2 Drive selection

Motor selection Usually, plants in sorter and conveyor systems with DLD motors are designed for S1 op-
eration. The motor power available in the operating point should be about 20% higher
than the max. required feed thrust.

Inverter selection The inverter must be able to continuously provide the nominal motor current. The con-
tinuous output current provided by the inverter can be calculated as follows:
ID = X x IN
ID = continuous output current from the inverter [A]
IN = nominal motor current [A]
X = Number of motors

Group drives with Multiple asynchronous DLD linear motors can be connected to one inverter in parallel.
DLD motors However, make sure that the motor cable lengths do not vary crucially.

Operating Instructions – DLD Asynchronous Linear Motors 11

 Project Planning Information
3 Speed monitoring and control

3.3 Speed monitoring and control

Generally, the linear drives can be operated in U/f mode (speed-controlled) Should there
be higher demands on the accuracy, there are various possibilities to detect the feed
rate of the secondary. We will describe two options.

3.3.1 Speed detection with contact

An analog speed indicator [1] driven by the friction wheel generates a voltage propor-
tional to the speed of the secondary [2]. The analog signal is used as an input signal for
a PI controller to be programmed in the inverter [3].

[2]

[1]
A
[3]

[4]

64411AXX

[1] Friction wheel speed indicator with analog output

[2] Secondary of the linear motor
[3] MOVIDRIVE® inverter
[4] Primary of the linear motor

12 Operating Instructions – DLD Asynchronous Linear Motors

 Project Planning Information
Speed monitoring and control
3

3.3.2 Contactless speed detection

Light barriers [1] are installed along the travel distance of the secondary [2]. At a consis-
tent speed, a continuous pulse sequence is generated via the light barrier signals. The
light barriers are read-in in the PLC or at the MOVIDRIVE® inverter. A speed control
and a detection of the direction of motion can be realized in the user program via the
time intervals of the edges and the sequence.

[2]

[1]

[4]
[3]

64412AXX

[1] Light barrier

[2] Secondary of the linear motor
[3] MOVIDRIVE® inverter
[4] Primary of the linear motor

Operating Instructions – DLD Asynchronous Linear Motors 13

 Installation/Assembly
4 Before you start

4 Installation/Assembly
4.1 Before you start
The drive may only be installed if
• the power of the linear motor is suitable for the frequency inverter
• the drive is undamaged (no damage caused by transportation or storage).
• you are certain that the following requirements have been fulfilled:
– Ambient temperature between -20 °C and +40 °C
– No oil, acid, gas, vapors, radiation, etc.
– Installation altitude max 1000 m (absolute altitude)
– Not intended for the use in wet and unprotected areas

4.2 Preliminary work after longer periods of storage

Check whether the motor has absorbed any moisture during storage. Check the insula-
tion resistance (500 V test voltage). Sufficient insulation resistance: 10 MΩ at 25 °C.

The insulation resistance largely depends on the temperature conditions. Consult

SEW-EURODRIVE should the insulation resistance turn out to be insufficient.

4.3 Installing the motor

The motor may only be mounted in the specified position on a level, vibration-free and
torsionally rigid support structure.
• Align the motor with due care in order to prevent an impermissible load on the sec-
ondary.
• Provide for unobstructed cooling air supply.

14 Operating Instructions – DLD Asynchronous Linear Motors

 Electrical Installation
Before you start
5

5 Electrical Installation

If you use electronic speed monitoring devices, observe the respective operating
instructions and wiring diagrams.

5.1 Before you start

5.1.1 Tools/accessories
• Standard tools
• If using wire end sleeves: Crimping tool and wire end sleeves (without insulation joint,
DIN 46228 section 1, material E-CU)

00057AXX

5.2 Connection via integrated IS plug connector

5.2.1 Description/technical data
The integrated IS plug connector allows for connecting the motor quickly and easily.
In addition it facilitates the removal and re-installation process for inspection, mainte-
nance and repair purposes.
The lower part of the integrated IS plug connector comes completely wired as a standard
(for functions like forced cooling fan etc.). Connect the upper part of the plug connector
according to the wiring diagram.
The integrated IS plug connector complies with DIN VDE 0110 with a rated voltage of
690 V and cleanliness factor 3.

[2]

[1]

64653AXX

[1] IS plug connector upper part

[2] IS integrated plug connector lower part

Operating Instructions – DLD Asynchronous Linear Motors 15

 Electrical Installation
5 Connection via integrated IS plug connector

5.2.2 Input connection (IS plug connector lower part)

Fan
230 V 50 Hz

* reserved; not connected

1. Positive temperature coefficient 1. Positive temperature coefficient
thermistor (TF) left thermistor (TF) right
2. Positive temperature coefficient 2. Positive temperature coefficient
thermistor (TF) left thermistor (TF) right

5.2.3 Output connection (IS plug connector upper part)

TF trip switch

optional both TFs optional both TFs connected

in series
connected separately

Variable terminal link Variable terminal link

Frequency Inverter

16 Operating Instructions – DLD Asynchronous Linear Motors

 Electrical Installation
Connection via integrated IS plug connector
5

5.2.4 Cable requirements

Only use cable types that comply with the requirements of the applicable regulations.
The nominal currents are specified on the nameplate. Possible cable cross sections with
variable terminal link: 0.25 - 2.5 mm2.
SEW recommends to use shielded cables in conjunction with EMC glands (not included
in the scope of the SEW delivery).

5.2.5 Wiring the upper part of the integrated IS plug connector provided by the customer
1. Remove the screws of the housing cover.
– Remove the cover
2. Remove the screws of the upper part and
– remove the upper part from the housing
3. Remove about 9 mm of the insulation of the connection cable.
4. Insert the cable through the EMC cable gland (not included in the scope of delivery).
Make sure that the shield is applied to the gland over a large area.
5. Connect the leads according to the wiring diagram in section 5.2.3
6. Install the variable terminal link (standard scope of delivery). Insert the upper con-
nections of the variable terminal link into the IS plug connector.

1
2
3
4
5
6

64821AXX

7. Install the mating connector

8. SEW recommends to connect both shield ends with the ground potential (PE). On
the motor end, you can use an EMC gland, on the FI end, you can apply the shield.

Operating Instructions – DLD Asynchronous Linear Motors 17

 Electrical Installation
5 Connection via integrated IS plug connector

5.2.6 Installing the plug connector

The housing cover of the IS plug connector can be screwed onto the lower section of
the plug connector depending on the required position of the cable lead. The upper sec-
tion of the plug connector shown in the following figure must first be installed in the hous-
ing cover so it will match the position of the lower section of the plug connector:
• Define the required mounting position
• Install the upper section of the plug connector into the housing cover in accordance
with the mounting position
• Close the plug connector
• Tighten the cable gland

64822AXX

18 Operating Instructions – DLD Asynchronous Linear Motors

 Electrical Installation
Connection via integrated IS plug connector
5

Mounting position of the upper section of the plug connector in the housing cover

64610AXX

Operating Instructions – DLD Asynchronous Linear Motors 19

 Electrical Installation
5 Thermal motor protection

5.2.7 Installing the integrated IS plug connector

The housing cover of the integrated plug connector can be connected to the lower part
according to the desired cable position. You have to install the upper part in the housing
cover according to the position of the lower part:
1. Determine the required mounting position
2. Install the upper part in the housing cover according to the mounting position
3. Connect the plug connector
4. Screw the lower part on the housing cover
5. Tighten the cable glands

You have to insert the bridge with all 6 pins as illustrated (see section 5.2.3) . If
not properly installed, only one stator part is supplied, the drive generates only
half the feed thrust and overheats.

5.3 Thermal motor protection

5.3.1 TF temperature sensor
Do not energize the terminals.
Check the resistance (measure with V ≤ 2.5 V)
Measurement per sensor: Cold resistance 20 - 250 Ω; thermal resistance > 4000 Ω.
Connection to a measuring instrument in the control cabinet according to DIN 44081.

5.3.2 Fan
The fan motors are equipped with bimetallic thermostats for overload protection.

20 Operating Instructions – DLD Asynchronous Linear Motors

 Startup I
Before you start
6
0

6 Startup
6.1 Before you start
Before startup, make sure that:
• All connections have been made properly
• The direction of force of the motor is correct
U, V, W is connected to U, V, W
• The drive is not blocked
• There are no other hazards

During startup, make sure that:

• the motor is running correctly (no speed fluctuations, no loud noises, etc.). Malfunc-
tions, see section 7.

Operating Instructions – DLD Asynchronous Linear Motors 21

 Malfunctions
7 Before you start

7 Malfunctions

Problem Possible cause Solution

Check the respective connections and replace
Cable defective
them if necessary
Fuse has blown Replace the fuse
Make sure that the motor protection is set-up cor-
Motor does not start eas- Motor protection
rectly and adjust it if necessary
ily or does not start at all
Terminal strip designed for delta connection but
Re-wire, see section 5.2
wired in start connection
Check the inverter settings and the cable cross
Insufficient power supply
sections
Incorrect direction of Check the wiring and swap two phases if neces-
Motor not wired correctly
rotation sary

Motor makes humming Motor needs to be repaired by qualified service

Faulty winding
noise and requires too engineers
much energy System blocked Check system for blocking
Short circuit in the cables Eliminate short circuit
Fuse blows or motor pro-
Malfunction to be eliminated in a specialist work-
tection trips immediately, Short circuit in motor
shop
overload in the inverter
Lines connected incorrectly Check connections, correct if necessary
Measure the power and reduce the load if neces-
Overload
sary
Significantly lower speed
under load Voltage drop Use cables with a higher cross section
Incorrect inverter parameters Change the inverter parameters
Measure the power and reduce the load if neces-
Overload
sary
Adjust the cooling air supply or clean the air pas-
Insufficient cooling
sage. Check the forced cooling fan
Motor overheats, thermal
protection function trips Forced cooling fan does not run Check connection and correct, if necessary
Ambient temperature too high Reduce the power
Terminal strip designed for delta connection but
Re-wire, see section 5.2.5 and 5.2.6
wired in star connection

22 Operating Instructions – DLD Asynchronous Linear Motors

 Technical Data kVA n
Dimension sheet DLD 200-7 / DLD 400-6 / DLD 401-6
f 8
i
P Hz

8 Technical Data
8.1 Dimension sheet DLD 200-7 / DLD 400-6 / DLD 401-6

X L2
B2 H3

H2

H
H4

H1

B1
e3

S2

S1
H6

e2

e1
B
H5

L1
X
L

50210AXX

Type L B H L1 L2 B1 B2 H1 H2 H3 H4 H5 H6 e1 e2 e3 s1 s2
DLD 200-7 826 426 191 723 591 171 7.1 ±0.3 68 93 26 79 5 98 330 250 40 18 9
DLD 400-6 780 582 235 660 508 243 7.5 ±0.3 81 114 26 79 33 148 480.8 320.8 60 18 9
DLD 401-6 780 736 235 660 508 243 7.5 ±0.3 81 114 26 79 33 148 575 415 60 18 9

The secondary is not included in the scope of delivery. The dimensions H5 and H6 serve
as a reference for dimensioning the secondary. The H5 values are maximum values that
must not be exceeded. The H6 values are minimum values for achieving the nominal
data (see section "Technical Data").

Operating Instructions – DLD Asynchronous Linear Motors 23

 kVA n Technical Data
8 f
Dimension sheet DLD 402-6 flat
i
P Hz

8.2 Dimension sheet DLD 402-6 flat

541

(88.5)
508

M8

37
114.5
88.5
183

65
39.5

43.5
121.5 121.5
478 [1]
780.42
660
60
9

18
6 6

+0.3
6.5 -0.1
6.5+0.3
-0.1

7.5⫾0.3

480.8
320.8
2 2

[2]

24 Operating Instructions – DLD Asynchronous Linear Motors

 Technical Data kVA n
Motor data primary
f 8
i
P Hz

8.3 Motor data primary

Fmax

FN

vN vsync v

50198AXX

The following nominal values can only be achieved if the secondary is dimensioned ex-
actly according to the values in section 6.2.

Motor size
DLD 400-6 DLD 400-6
DLD 200-7 DLD 401-6 DLD 401-6
DLD 402-6 power fan 230 V

Nominal thrust FN 31 mS/m 165 260 315

[N]
force FN 35 mS/m 185 280 350
Nominal speed vN [m/s] 2
Rated power PN [kW] 0.37 0.56 0.7
Voltage in the operating point VN [V] 340 310 330
Nominal current IN [A] 4.8 9.0 9.8
Nominal frequency fN [Hz] 23
Power factor cos j 0.74 0.76 0.64
Pole pitch [mm] 84
Motor protection TF temperature sensor
Degree of protection IP00
Weight [kg] 56 59
Noise level [db(A)] < 60
Ambient temperature [°C] -20 °C to +40 °C
Connection IS integrated plug connector

Operating Instructions – DLD Asynchronous Linear Motors 25

 kVA n Technical Data
8 f
Motor data secondary
i
P Hz

8.4 Motor data secondary

Observe the H5 and H6 values as well as the length of the secondary, if possible, without
exceeding or falling below them.
Secondary [mm] Secondary [mm] Nominal conductance
Motor size
H6 Length Aluminum Copper Aluminum Copper
DLD 200 98 700 5 3
min. 35 mS/m min. 55 mS/m
DLD 400 / 401 148 650 5 3

If it is not possible to observe the thickness of the secondary and the conductance, there
is the following approximation.

actual thickness actual conductance

reduced force = rated forced x x
rated thickness rated conductance

The secondary is not included in the scope of delivery.

26 Operating Instructions – DLD Asynchronous Linear Motors

 Technical Data kVA n
Forced cooling fan
f 8
i
P Hz

8.5 Forced cooling fan

8.5.1 FAN 230 V (standard)

Motor size
DLD 400-6
DLD 200-7 DLD 401-6
DLD 402-6
Number of fans 3 2
Voltage VN [V] 230
Current I [A] 0.9 0.6
Frequency f [Hz] 50
Power P [W] 135 90
Degree of pro- IP20
tection

8.5.2 POWER FAN 230 V

Motor size
DLD 400-6
DLD 401-6
Number of fans 2
Voltage VN [V] 230
Current I [A] 0.7
Frequency f [Hz] 50
Power P [W] 100
Degree of pro- IP54
tection

8.5.3 FAN 115 V

Motor size
DLD 400-6
DLD 200-7 DLD 401-6
DLD 402-6
Number of fans 2 3
Voltage VN [V] 115
Current I [A] 1.5 1.0
Frequency f [Hz] 60
Power P [W] 120 80
Degree of pro- IP 20
tection

Operating Instructions – DLD Asynchronous Linear Motors 27

 Address List

Address List
Germany
Headquarters Bruchsal SEW-EURODRIVE GmbH & Co KG Tel. +49 7251 75-0
Production Ernst-Blickle-Straße 42 Fax +49 7251 75-1970
Sales D-76646 Bruchsal http://www.sew-eurodrive.de
P.O. Box sew@sew-eurodrive.de
Postfach 3023 • D-76642 Bruchsal
Service Central SEW-EURODRIVE GmbH & Co KG Tel. +49 7251 75-1710
Competence Center Ernst-Blickle-Straße 1 Fax +49 7251 75-1711
D-76676 Graben-Neudorf sc-mitte@sew-eurodrive.de
North SEW-EURODRIVE GmbH & Co KG Tel. +49 5137 8798-30
Alte Ricklinger Straße 40-42 Fax +49 5137 8798-55
D-30823 Garbsen (near Hannover) sc-nord@sew-eurodrive.de
East SEW-EURODRIVE GmbH & Co KG Tel. +49 3764 7606-0
Dänkritzer Weg 1 Fax +49 3764 7606-30
D-08393 Meerane (near Zwickau) sc-ost@sew-eurodrive.de
South SEW-EURODRIVE GmbH & Co KG Tel. +49 89 909552-10
Domagkstraße 5 Fax +49 89 909552-50
D-85551 Kirchheim (near München) sc-sued@sew-eurodrive.de
West SEW-EURODRIVE GmbH & Co KG Tel. +49 2173 8507-30
Siemensstraße 1 Fax +49 2173 8507-55
D-40764 Langenfeld (near Düsseldorf) sc-west@sew-eurodrive.de
Electronics SEW-EURODRIVE GmbH & Co KG Tel. +49 7251 75-1780
Ernst-Blickle-Straße 42 Fax +49 7251 75-1769
D-76646 Bruchsal sc-elektronik@sew-eurodrive.de
Drive Service Hotline / 24 Hour Service +49 180 5 SEWHELP
+49 180 5 7394357
Additional addresses for service in Germany provided on request!

France
Production Haguenau SEW-USOCOME Tel. +33 3 88 73 67 00
Sales 48-54, route de Soufflenheim Fax +33 3 88 73 66 00
Service B. P. 20185 http://www.usocome.com
F-67506 Haguenau Cedex sew@usocome.com
Production Forbach SEW-EUROCOME Tel. +33 3 87 29 38 00
Zone Industrielle
Technopôle Forbach Sud
B. P. 30269
F-57604 Forbach Cedex
Assembly Bordeaux SEW-USOCOME Tel. +33 5 57 26 39 00
Sales Parc d'activités de Magellan Fax +33 5 57 26 39 09
Service 62, avenue de Magellan - B. P. 182
F-33607 Pessac Cedex
Lyon SEW-USOCOME Tel. +33 4 72 15 37 00
Parc d'Affaires Roosevelt Fax +33 4 72 15 37 15
Rue Jacques Tati
F-69120 Vaulx en Velin
Paris SEW-USOCOME Tel. +33 1 64 42 40 80
Zone industrielle Fax +33 1 64 42 40 88
2, rue Denis Papin
F-77390 Verneuil I'Etang
Additional addresses for service in France provided on request!

28
 Address List

Algeria
Sales Alger Réducom Tel. +213 21 8222-84
16, rue des Frères Zaghnoun Fax +213 21 8222-84
Bellevue El-Harrach reducom_sew@yahoo.fr
16200 Alger

Argentina
Assembly Buenos Aires SEW EURODRIVE ARGENTINA S.A. Tel. +54 3327 4572-84
Sales Centro Industrial Garin, Lote 35 Fax +54 3327 4572-21
Service Ruta Panamericana Km 37,5 sewar@sew-eurodrive.com.ar
1619 Garin http://www.sew-eurodrive.com.ar

Australia
Assembly Melbourne SEW-EURODRIVE PTY. LTD. Tel. +61 3 9933-1000
Sales 27 Beverage Drive Fax +61 3 9933-1003
Service Tullamarine, Victoria 3043 http://www.sew-eurodrive.com.au
enquires@sew-eurodrive.com.au
Sydney SEW-EURODRIVE PTY. LTD. Tel. +61 2 9725-9900
9, Sleigh Place, Wetherill Park Fax +61 2 9725-9905
New South Wales, 2164 enquires@sew-eurodrive.com.au

Austria
Assembly Wien SEW-EURODRIVE Ges.m.b.H. Tel. +43 1 617 55 00-0
Sales Richard-Strauss-Strasse 24 Fax +43 1 617 55 00-30
Service A-1230 Wien http://sew-eurodrive.at
sew@sew-eurodrive.at

Belarus
Sales Minsk SEW-EURODRIVE BY Tel.+375 (17) 298 38 50
RybalkoStr. 26 Fax +375 (17) 29838 50
BY-220033 Minsk sales@sew.by

Belgium
Assembly Brüssel SEW Caron-Vector Tel. +32 10 231-311
Sales Avenue Eiffel 5 Fax +32 10 231-336
Service B-1300 Wavre http://www.sew-eurodrive.be
info@caron-vector.be
Service Industrial Gears SEW Caron-Vector Tel. +32 84 219-878
Competence Center Rue de Parc Industriel, 31 Fax +32 84 219-879
BE-6900 Marche-en-Famenne http://www.sew-eurodrive.be
service-wallonie@sew-eurodrive.be
Antwerp SEW Caron-Vector Tel. +32 3 64 19 333
Glasstraat, 19 Fax +32 3 64 19 336
BE-2170 Merksem http://www.sew-eurodrive.be
service-antwerpen@sew-eurodrive.be

Brazil
Production Sao Paulo SEW-EURODRIVE Brasil Ltda. Tel. +55 11 2489-9133
Sales Avenida Amâncio Gaiolli, 152 - Rodovia Fax +55 11 2480-3328
Service Presidente Dutra Km 208 http://www.sew-eurodrive.com.br
Guarulhos - 07251-250 - SP sew@sew.com.br
SAT - SEW ATENDE - 0800 7700496
Additional addresses for service in Brazil provided on request!

Bulgaria
Sales Sofia BEVER-DRIVE GmbH Tel. +359 2 9151160
Bogdanovetz Str.1 Fax +359 2 9151166
BG-1606 Sofia bever@fastbg.net

29
 Address List

Cameroon
Sales Douala Electro-Services Tel. +237 33 431137
Rue Drouot Akwa Fax +237 33 431137
B.P. 2024
Douala

Canada
Assembly Toronto SEW-EURODRIVE CO. OF CANADA LTD. Tel. +1 905 791-1553
Sales 210 Walker Drive Fax +1 905 791-2999
Service Bramalea, Ontario L6T3W1 http://www.sew-eurodrive.ca
marketing@sew-eurodrive.ca
Vancouver SEW-EURODRIVE CO. OF CANADA LTD. Tel. +1 604 946-5535
7188 Honeyman Street Fax +1 604 946-2513
Delta. B.C. V4G 1 E2 marketing@sew-eurodrive.ca
Montreal SEW-EURODRIVE CO. OF CANADA LTD. Tel. +1 514 367-1124
2555 Rue Leger Fax +1 514 367-3677
LaSalle, Quebec H8N 2V9 marketing@sew-eurodrive.ca
Additional addresses for service in Canada provided on request!

Chile
Assembly Santiago de SEW-EURODRIVE CHILE LTDA. Tel. +56 2 75770-00
Sales Chile Las Encinas 1295 Fax +56 2 75770-01
Service Parque Industrial Valle Grande http://www.sew-eurodrive.cl
LAMPA ventas@sew-eurodrive.cl
RCH-Santiago de Chile
P.O. Box
Casilla 23 Correo Quilicura - Santiago - Chile

China
Production Tianjin SEW-EURODRIVE (Tianjin) Co., Ltd. Tel. +86 22 25322612
Assembly No. 46, 7th Avenue, TEDA Fax +86 22 25322611
Sales Tianjin 300457 info@sew-eurodrive.cn
Service http://www.sew-eurodrive.cn
Assembly Suzhou SEW-EURODRIVE (Suzhou) Co., Ltd. Tel. +86 512 62581781
Sales 333, Suhong Middle Road Fax +86 512 62581783
Service Suzhou Industrial Park suzhou@sew-eurodrive.cn
Jiangsu Province, 215021
Guangzhou SEW-EURODRIVE (Guangzhou) Co., Ltd. Tel. +86 20 82267890
No. 9, JunDa Road Fax +86 20 82267891
East Section of GETDD guangzhou@sew-eurodrive.cn
Guangzhou 510530
Shenyang SEW-EURODRIVE (Shenyang) Co., Ltd. Tel. +86 24 25382538
10A-2, 6th Road Fax +86 24 25382580
Shenyang Economic Technological shenyang@sew-eurodrive.cn
Development Area
Shenyang, 110141
Wuhan SEW-EURODRIVE (Wuhan) Co., Ltd. Tel. +86 27 84478398
10A-2, 6th Road Fax +86 27 84478388
No. 59, the 4th Quanli Road, WEDA
430056 Wuhan
Additional addresses for service in China provided on request!

Colombia
Assembly Bogotá SEW-EURODRIVE COLOMBIA LTDA. Tel. +57 1 54750-50
Sales Calle 22 No. 132-60 Fax +57 1 54750-44
Service Bodega 6, Manzana B http://www.sew-eurodrive.com.co
Santafé de Bogotá sewcol@sew-eurodrive.com.co

30
 Address List

Croatia
Sales Zagreb KOMPEKS d. o. o. Tel. +385 1 4613-158
Service PIT Erdödy 4 II Fax +385 1 4613-158
HR 10 000 Zagreb kompeks@inet.hr

Czech Republic
Sales Praha SEW-EURODRIVE CZ S.R.O. Tel. +420 255 709 601
Business Centrum Praha Fax +420 220 121 237
Lužná 591 http://www.sew-eurodrive.cz
CZ-16000 Praha 6 - Vokovice sew@sew-eurodrive.cz

Denmark
Assembly Kopenhagen SEW-EURODRIVEA/S Tel. +45 43 9585-00
Sales Geminivej 28-30 Fax +45 43 9585-09
Service DK-2670 Greve http://www.sew-eurodrive.dk
sew@sew-eurodrive.dk

Egypt
Sales Cairo Copam Egypt Tel. +20 2 22566-299 + 1 23143088
Service for Engineering & Agencies Fax +20 2 22594-757
33 EI Hegaz ST, Heliopolis, Cairo http://www.copam-egypt.com/
copam@datum.com.eg
Service Sharjah Copam Middle East (FZC) Tel. +971 6 5578-488
Sharjah Airport International Free Zone Fax +971 6 5578-499
P.O. Box 120709 copam_me@eim.ae
Sharjah
United Arabian Emirates

Estonia
Sales Tallin ALAS-KUUL AS Tel. +372 6593230
Reti tee 4 Fax +372 6593231
EE-75301 Peetri küla, Rae vald, Harjumaa veiko.soots@alas-kuul.ee

Finland
Assembly Lahti SEW-EURODRIVE OY Tel. +358 201 589-300
Sales Vesimäentie 4 Fax +358 3 780-6211
Service FIN-15860 Hollola 2 sew@sew.fi
http://www.sew-eurodrive.fi
Production Karkkila SEW Industrial Gears Oy Tel. +358 201 589-300
Assembly Valurinkatu 6, PL 8 Fax +358 201 589-310
Service FI-03600 Karkkila, 03601 Karkkila sew@sew.fi
http://www.sew-eurodrive.fi

Gabon
Sales Libreville ESG Electro Services Gabun Tel. +241 741059
Feu Rouge Lalala Fax +241 741059
1889 Libreville
Gabun

Great Britain
Assembly Normanton SEW-EURODRIVE Ltd. Tel. +44 1924 893-855
Sales Beckbridge Industrial Estate Fax +44 1924 893-702
Service P.O. Box No.1 http://www.sew-eurodrive.co.uk
GB-Normanton, West- Yorkshire WF6 1QR info@sew-eurodrive.co.uk

Greece
Sales Athen Christ. Boznos & Son S.A. Tel. +30 2 1042 251-34
Service 12, Mavromichali Street Fax +30 2 1042 251-59
P.O. Box 80136, GR-18545 Piraeus http://www.boznos.gr
info@boznos.gr

31
 Address List

Hong Kong
Assembly Hong Kong SEW-EURODRIVE LTD. Tel. +852 36902200
Sales Unit No. 801-806, 8th Floor Fax +852 36902211
Service Hong Leong Industrial Complex contact@sew-eurodrive.hk
No. 4, Wang Kwong Road
Kowloon, Hong Kong

Hungary
Sales Budapest SEW-EURODRIVE Kft. Tel. +36 1 437 06-58
Service H-1037 Budapest Fax +36 1 437 06-50
Kunigunda u. 18 office@sew-eurodrive.hu

India
Registered Office Vadodara SEW-EURODRIVE India Private Limited Tel. +91 265 2831086
Assembly Plot No. 4, GIDC Fax +91 265 2831087
Sales POR Ramangamdi • Vadodara - 391 243 http://www.seweurodriveindia.com
Service Gujarat sales@seweurodriveindia.com
subodh.ladwa@seweurodriveindia.com
Assembly Chennai SEW-EURODRIVE India Private Limited Tel. +91 44 37188888
Sales Plot No. K3/1, Sipcot Industrial Park Phase II Fax +91 44 37188811
Service Mambakkam Village c.v.shivkumar@seweurodriveindia.com
Sriperumbudur - 602105
Kancheepuram Dist, Tamil Nadu

Ireland
Sales Dublin Alperton Engineering Ltd. Tel. +353 1 830-6277
Service 48 Moyle Road Fax +353 1 830-6458
Dublin Industrial Estate info@alperton.ie
Glasnevin, Dublin 11 http://www.alperton.ie

Israel
Sales Tel-Aviv Liraz Handasa Ltd. Tel. +972 3 5599511
Ahofer Str 34B / 228 Fax +972 3 5599512
58858 Holon http://www.liraz-handasa.co.il
office@liraz-handasa.co.il

Italy
Assembly Milano SEW-EURODRIVE di R. Blickle & Co.s.a.s. Tel. +39 02 96 9801
Sales Via Bernini,14 Fax +39 02 96 799781
Service I-20020 Solaro (Milano) http://www.sew-eurodrive.it
sewit@sew-eurodrive.it

Ivory Coast
Sales Abidjan SICA Tel. +225 2579-44
Ste industrielle et commerciale pour l'Afrique Fax +225 2584-36
165, Bld de Marseille
B.P. 2323, Abidjan 08

Japan
Assembly Iwata SEW-EURODRIVE JAPAN CO., LTD Tel. +81 538 373811
Sales 250-1, Shimoman-no, Fax +81 538 373814
Service Iwata http://www.sew-eurodrive.co.jp
Shizuoka 438-0818 sewjapan@sew-eurodrive.co.jp

Korea
Assembly Ansan-City SEW-EURODRIVE KOREA CO., LTD. Tel. +82 31 492-8051
Sales B 601-4, Banweol Industrial Estate Fax +82 31 492-8056
Service 1048-4, Shingil-Dong http://www.sew-korea.co.kr
Ansan 425-120 master@sew-korea.co.kr

32
 Address List

Korea
Busan SEW-EURODRIVE KOREA Co., Ltd. Tel. +82 51 832-0204
No. 1720 - 11, Songjeong - dong Fax +82 51 832-0230
Gangseo-ku master@sew-korea.co.kr
Busan 618-270

Latvia
Sales Riga SIA Alas-Kuul Tel. +371 7139253
Katlakalna 11C Fax +371 7139386
LV-1073 Riga http://www.alas-kuul.com
info@alas-kuul.com

Lebanon
Sales Beirut Gabriel Acar & Fils sarl Tel. +961 1 4947-86
B. P. 80484 +961 1 4982-72
Bourj Hammoud, Beirut +961 3 2745-39
Fax +961 1 4949-71
ssacar@inco.com.lb

Lithuania
Sales Alytus UAB Irseva Tel. +370 315 79204
Naujoji 19 Fax +370 315 56175
LT-62175 Alytus info@irseva.lt
http://www.sew-eurodrive.lt

Luxembourg
Assembly Brüssel CARON-VECTOR S.A. Tel. +32 10 231-311
Sales Avenue Eiffel 5 Fax +32 10 231-336
Service B-1300 Wavre http://www.sew-eurodrive.lu
info@caron-vector.be

Malaysia
Assembly Johore SEW-EURODRIVE SDN BHD Tel. +60 7 3549409
Sales No. 95, Jalan Seroja 39, Taman Johor Jaya Fax +60 7 3541404
Service 81000 Johor Bahru, Johor sales@sew-eurodrive.com.my
West Malaysia

Mexico
Assembly Quéretaro SEW-EURODRIVE MEXICO SA DE CV Tel. +52 442 1030-300
Sales SEM-981118-M93 Fax +52 442 1030-301
Service Tequisquiapan No. 102 http://www.sew-eurodrive.com.mx
Parque Industrial Quéretaro scmexico@seweurodrive.com.mx
C.P. 76220
Quéretaro, México

Morocco
Sales Casablanca Afit Tel. +212 22618372
5, rue Emir Abdelkader Fax +212 22618351
MA 20300 Casablanca ali.alami@premium.net.ma

Netherlands
Assembly Rotterdam VECTOR Aandrijftechniek B.V. Tel. +31 10 4463-700
Sales Industrieweg 175 Fax +31 10 4155-552
Service NL-3044 AS Rotterdam http://www.vector.nu
Postbus 10085 info@vector.nu
NL-3004 AB Rotterdam

33
 Address List

New Zealand
Assembly Auckland SEW-EURODRIVE NEW ZEALAND LTD. Tel. +64 9 2745627
Sales P.O. Box 58-428 Fax +64 9 2740165
Service 82 Greenmount drive http://www.sew-eurodrive.co.nz
East Tamaki Auckland sales@sew-eurodrive.co.nz
Christchurch SEW-EURODRIVE NEW ZEALAND LTD. Tel. +64 3 384-6251
10 Settlers Crescent, Ferrymead Fax +64 3 384-6455
Christchurch sales@sew-eurodrive.co.nz

Norway
Assembly Moss SEW-EURODRIVE A/S Tel. +47 69 24 10 20
Sales Solgaard skog 71 Fax +47 69 24 10 40
Service N-1599 Moss http://www.sew-eurodrive.no
sew@sew-eurodrive.no

Peru
Assembly Lima SEW DEL PERU MOTORES REDUCTORES Tel. +51 1 3495280
Sales S.A.C. Fax +51 1 3493002
Service Los Calderos, 120-124 http://www.sew-eurodrive.com.pe
Urbanizacion Industrial Vulcano, ATE, Lima sewperu@sew-eurodrive.com.pe

Poland
Assembly Lodz SEW-EURODRIVE Polska Sp.z.o.o. Tel. +48 42 676 53 00
Sales ul. Techniczna 5 Fax +48 42 676 53 45
Service PL-92-518 £ódŸ http://www.sew-eurodrive.pl
sew@sew-eurodrive.pl
24 Hour Service Tel. +48 602 739 739
(+48 602 SEW SEW)
sewis@sew-eurodrive.pl

Portugal
Assembly Coimbra SEW-EURODRIVE, LDA. Tel. +351 231 20 9670
Sales Apartado 15 Fax +351 231 20 3685
Service P-3050-901 Mealhada http://www.sew-eurodrive.pt
infosew@sew-eurodrive.pt

Romania
Sales Bucureºti Sialco Trading SRL Tel. +40 21 230-1328
Service str. Madrid nr.4 Fax +40 21 230-7170
011785 Bucuresti sialco@sialco.ro

Russia
Assembly St. Petersburg ZAO SEW-EURODRIVE Tel. +7 812 3332522 +7 812 5357142
Sales P.O. Box 36 Fax +7 812 3332523
Service 195220 St. Petersburg Russia http://www.sew-eurodrive.ru
sew@sew-eurodrive.ru

Senegal
Sales Dakar SENEMECA Tel. +221 338 494 770
Mécanique Générale Fax +221 338 494 771
Km 8, Route de Rufisque senemeca@sentoo.sn
B.P. 3251, Dakar

Serbia
Sales Beograd DIPAR d.o.o. Tel. +381 11 347 3244 / +381 11 288
Ustanicka 128a 0393
PC Košum, IV floor Fax +381 11 347 1337
SCG-11000 Beograd office@dipar.co.yu

34
 Address List

Singapore
Assembly Singapore SEW-EURODRIVE PTE. LTD. Tel. +65 68621701
Sales No 9, Tuas Drive 2 Fax +65 68612827
Service Jurong Industrial Estate http://www.sew-eurodrive.com.sg
Singapore 638644 sewsingapore@sew-eurodrive.com

Slovakia
Sales Bratislava SEW-Eurodrive SK s.r.o. Tel. +421 2 33595 202
Rybnièná 40 Fax +421 2 33595 200
SK-831 06 Bratislava sew@sew-eurodrive.sk
http://www.sew-eurodrive.sk
Žilina SEW-Eurodrive SK s.r.o. Tel. +421 41 700 2513
Industry Park - PChZ Fax +421 41 700 2514
ulica M.R.Štefánika 71 sew@sew-eurodrive.sk
SK-010 01 Žilina
Banská Bystrica SEW-Eurodrive SK s.r.o. Tel. +421 48 414 6564
Rudlovská cesta 85 Fax +421 48 414 6566
SK-974 11 Banská Bystrica sew@sew-eurodrive.sk
Košice SEW-Eurodrive SK s.r.o. Tel. +421 55 671 2245
Slovenská ulica 26 Fax +421 55 671 2254
SK-040 01 Košice sew@sew-eurodrive.sk

Slovenia
Sales Celje Pakman - Pogonska Tehnika d.o.o. Tel. +386 3 490 83-20
Service UI. XIV. divizije 14 Fax +386 3 490 83-21
SLO - 3000 Celje pakman@siol.net

South Africa
Assembly Johannesburg SEW-EURODRIVE (PROPRIETARY) LIMITED Tel. +27 11 248-7000
Sales Eurodrive House Fax +27 11 494-3104
Service Cnr. Adcock Ingram and Aerodrome Roads http://www.sew.co.za
Aeroton Ext. 2 info@sew.co.za
Johannesburg 2013
P.O.Box 90004
Bertsham 2013
Cape Town SEW-EURODRIVE (PROPRIETARY) LIMITED Tel. +27 21 552-9820
Rainbow Park Fax +27 21 552-9830
Cnr. Racecourse & Omuramba Road Telex 576 062
Montague Gardens cfoster@sew.co.za
Cape Town
P.O.Box 36556
Chempet 7442
Cape Town
Durban SEW-EURODRIVE (PROPRIETARY) LIMITED Tel. +27 31 700-3451
2 Monaco Place Fax +27 31 700-3847
Pinetown cdejager@sew.co.za
Durban
P.O. Box 10433, Ashwood 3605

Spain
Assembly Bilbao SEW-EURODRIVE ESPAÑA, S.L. Tel. +34 94 43184-70
Sales Parque Tecnológico, Edificio, 302 Fax +34 94 43184-71
Service E-48170 Zamudio (Vizcaya) http://www.sew-eurodrive.es
sew.spain@sew-eurodrive.es

35
 Address List

Sweden
Assembly Jönköping SEW-EURODRIVE AB Tel. +46 36 3442 00
Sales Gnejsvägen 6-8 Fax +46 36 3442 80
Service S-55303 Jönköping http://www.sew-eurodrive.se
Box 3100 S-55003 Jönköping jonkoping@sew.se

Switzerland
Assembly Basel Alfred lmhof A.G. Tel. +41 61 417 1717
Sales Jurastrasse 10 Fax +41 61 417 1700
Service CH-4142 Münchenstein bei Basel http://www.imhof-sew.ch
info@imhof-sew.ch

Thailand
Assembly Chonburi SEW-EURODRIVE (Thailand) Ltd. Tel. +66 38 454281
Sales 700/456, Moo.7, Donhuaroh Fax +66 38 454288
Service Muang sewthailand@sew-eurodrive.com
Chonburi 20000

Tunisia
Sales Tunis T. M.S. Technic Marketing Service Tel. +216 71 4340-64 + 71 4320-29
Zone Industrielle Mghira 2 Fax +216 71 4329-76
Lot No. 39 tms@tms.com.tn
2082 Fouchana

Turkey
Assembly Istanbul SEW-EURODRIVE Tel. +90 216 4419164, 3838014,
Sales Hareket Sistemleri San. ve Tic. Ltd. Sti. 3738015
Service Bagdat Cad. Koruma Cikmazi No. 3 Fax +90 216 3055867
TR-34846 Maltepe ISTANBUL http://www.sew-eurodrive.com.tr
sew@sew-eurodrive.com.tr

Ukraine
Sales Dnepropetrovsk SEW-EURODRIVE Tel. +380 56 370 3211
Service Str. Rabochaja 23-B, Office 409 Fax +380 56 372 2078
49008 Dnepropetrovsk http://www.sew-eurodrive.ua
sew@sew-eurodrive.ua

USA
Production Southeast SEW-EURODRIVE INC. Tel. +1 864 439-7537
Assembly Region 1295 Old Spartanburg Highway Fax Sales +1 864 439-7830
Sales P.O. Box 518 Fax Manufacturing +1 864 439-9948
Service Lyman, S.C. 29365 Fax Assembly +1 864 439-0566
Corporate Offices Fax Confidential/HR +1 864 949-5557
http://www.seweurodrive.com
cslyman@seweurodrive.com
Assembly Northeast SEW-EURODRIVE INC. Tel. +1 856 467-2277
Sales Region Pureland Ind. Complex Fax +1 856 845-3179
Service 2107 High Hill Road, P.O. Box 481 csbridgeport@seweurodrive.com
Bridgeport, New Jersey 08014
Midwest Region SEW-EURODRIVE INC. Tel. +1 937 335-0036
2001 West Main Street Fax +1 937 440-3799
Troy, Ohio 45373 cstroy@seweurodrive.com
Southwest SEW-EURODRIVE INC. Tel. +1 214 330-4824
Region 3950 Platinum Way Fax +1 214 330-4724
Dallas, Texas 75237 csdallas@seweurodrive.com
Western Region SEW-EURODRIVE INC. Tel. +1 510 487-3560
30599 San Antonio St. Fax +1 510 487-6433
Hayward, CA 94544 cshayward@seweurodrive.com
Additional addresses for service in the USA provided on request!

36
 Address List

Venezuela
Assembly Valencia SEW-EURODRIVE Venezuela S.A. Tel. +58 241 832-9804
Sales Av. Norte Sur No. 3, Galpon 84-319 Fax +58 241 838-6275
Service Zona Industrial Municipal Norte http://www.sew-eurodrive.com.ve
Valencia, Estado Carabobo ventas@sew-eurodrive.com.ve
sewfinanzas@cantv.net

37
SEW-EURODRIVE – Driving the world
Drive Technology \ Drive Automation \ System Integration \ Services

How we’re driving the world

With people who With comprehensive With uncompromising

think fast and With a worldwide With drives and controls knowledge in virtually quality that reduces the
develop the service network that is that automatically every branch of cost and complexity of
future with you. always close at hand. improve your productivity. industry today. daily operations.

SEW-EURODRIVE
Driving the world

With a global presence With innovative With online information

that offers responsive technology that solves and software updates,
and reliable solutions. tomorrow’s problems via the Internet, available
Anywhere. today. around the clock.

SEW-EURODRIVE GmbH & Co KG

P.O. Box 3023 · D-76642 Bruchsal / Germany
Phone +49 7251 75-0 · Fax +49 7251 75-1970
sew@sew-eurodrive.com
www.sew-eurodrive.com