Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 42 views

    Material Safety Data Sheet: Product Identification

    Uploaded by

    محمد عزت
    This material safety data sheet provides information on Emulsion Semi Gloss paint. It lists the manufacturer as Univest Co. and notes the product contains 10-25% acrylic co-polymer dispersion. It may cause eye and skin irritation but has no significant health effects. In case of spill, contain the material and clean with water. Proper ventilation and protective equipment are recommended when handling the product.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Material Safety Data Sheet: Product Identification

    Uploaded by

    محمد عزت
    42 views2 pages
    This material safety data sheet provides information on Emulsion Semi Gloss paint. It lists the manufacturer as Univest Co. and notes the product contains 10-25% acrylic co-polymer dispersion. It may cause eye and skin irritation but has no significant health effects. In case of spill, contain the material and clean with water. Proper ventilation and protective equipment are recommended when handling the product.

    Original Title

    MSDS-11419

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This material safety data sheet provides information on Emulsion Semi Gloss paint. It lists the manufacturer as Univest Co. and notes the product contains 10-25% acrylic co-polymer dispersion. It may cause eye and skin irritation but has no significant health effects. In case of spill, contain the material and clean with water. Proper ventilation and protective equipment are recommended when handling the product.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    42 views2 pages

    Material Safety Data Sheet: Product Identification

    Uploaded by

    محمد عزت
    This material safety data sheet provides information on Emulsion Semi Gloss paint. It lists the manufacturer as Univest Co. and notes the product contains 10-25% acrylic co-polymer dispersion. It may cause eye and skin irritation but has no significant health effects. In case of spill, contain the material and clean with water. Proper ventilation and protective equipment are recommended when handling the product.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    MATERIAL SAFETY DATA SHEET

    Section - I PRODUCT IDENTIFICATION

    Product Name : EMULSION SEMI GLOSS Product Code : 11419 Updated : JAN. 2011
    Manufacturer’s Name UNIVEST CO.
    Trade Name DYRUP
    Address P. O. Box 7532, Riyadh 11472, Saudi Arabia Telephone : 2650078 Fax : 2650674

    Section - II HAZARDOUS INGREDIENTS

    Chemical Names PEL TLV VAPOUR


    of Components % (OSHA) (ACGIH) PRESSURE

    Acrylic Co-Polymer 10-25 NE NE 17 mm of Hg


    Dispersion (water components)

    NOTE This product does not contain ingredients considered carcinogens or potential carcinogens by ACGIH, Federal OSHA,
    NTP, IARC, or CAL/OSHA.

    ABBREVIATIONS C-CEILING LIMIT, D-NUISANCE PARTICLE TLV 10 MG/M3 TOTAL DUST, (C)-CARCINOGEN,
    (PC)-POTENTIAL CARCINOGEN, DD-INERT OR NUISANCE DUST PEL 15 MG/M3 TOTAL DUST, (1) NOT
    ESTABLISHED. USE STODDARD SOLVENT AS A GUIDE, (2) MM HG. [X] - HAZARDOUS
    ACCORDING TO : a-SARA 302/304, b-SARA 313, c-CERCLA 103a

    Section - III PHYSICAL DATA

    Boiling Point (°F) 214 (WATER) Specific Gravity 1.40


    (Water = 1)
    Vapor Pressure (mm Hg) 17 (WATER) Per Cent Volatile 65 - 70
    (By Volume (%)
    Vapor Density (Air = 1) EQUAL TO WATER Evaporation Rate SLOWER THAN ETHER

    Solubility in Water SOLUBLE Melting Point NA

    Appearance and Odor VISCOUS LIQUID

    Section - IV FIRE AND EXPLOSION DATA

    Flash Point NA Auto ignition NA


    (Test Method) Temperature

    Flammable Liquids in Air % by Volume Lower : NA Upper : NA

    Fire Extinguishing Media Water spray, CO2 Dry Chemicals, Foam and other approved methods.

    Special Fire
    Fighting None
    Procedures

    Unusual Fire and During emergency conditions overexposure to decomposition product may cause health hazard.
    Explosion Hazard Obtain medical attention.

    NE - Not Established NA - Not Applicable


    Section - V HEALTH HAZARD INFORMATION

    Eyes Flush immediately with large amounts of water. Get medical attention.

    Skin Wash affected area with soap water. Remove soiled clothing. Get medical attention if irritation
    First Aid persists.
    Inhalation
    None.
    Ingestion
    Consult a physician immediately. Do not induce vomiting.

    Eyes Causes irritation.

    Skin No significant effect.


    Nature of
    Hazard Inhalation No significant effect.

    Ingestion Stomach / intestinal irritation, nausea, vomiting, diarrhea.

    Acute No significant effect.


    Effects Overexposure
    of
    Overexposure
    Chronic None
    Overexposure

    ECOLOGY Keep out of all sewer & open bodies of water TOXICITY DATA NE

    Section - VI REACTIVITY DATA

    Conditions Contributing to Instability : None


    Incompatibility : None
    Hazardous Decomposition Products : May cause toxic fumes when heated to decomposition. Fumes may contain carbon monoxide.
    Conditions contributing to Hazardous Polymerization : None

    Section - VI I SPILL OR LEAK PROCEDURES

    Steps to be taken if Material Wash with water before attempting to clean up. Refer to hazard caution information in other section of MSDS.
    is Released or Spilled Contain spilled material and remove with inert absorbent. Store in closed container until disposed.

    Neutralizing Chemical : NA Waste Disposal Method: In accordance with local regulations.

    Section - VIII SPECIAL PROTECTION INFORMATION

    Ventilation Requirements Provide general dilution or local exhaust ventilation in volume and pattern to keep air contaminant
    concentration below current applicable safety health standards.

    Respiratory Protection : None

    Eye Protection : Do not get in eyes. Safety eyewear recommended. Protective Gloves : Use protective gloves, clothing and boots.
    & Protective Wear
    Precautions in Handling Keep away from heat. Do not store above 120° F. Keep container closed when not in use. Do not re-use empty
    & Storage containers. Wash soiled clothing before re-use.

    Information herein is given in good faith but no warranty, expressed or implied is made. Consult UNIVEST for further information.

    You might also like