Qualification: 11years
Qualification: 11years
Qualification: 11years
Qualification
Current Experience:
From January 2020 working with Petrofac International (KOC KUWAIT) as a Field Operation
Supervision handling project of TANK FARM, CPF, LFHO KOC oil and gas Kuwait till now.
From April 2019 working with Cairn India Vedanta refinery, as a Commissioning Operation
(handling project of GDU, VDU Vedanta oil and gas) Barmer Rajasthan India December 2019.
From August 2018 to Aril 2019 working with Marie Tecnimont, as a Commissioning Operation
Engineering Assistant (handling project of CPP- Al dabiya Surface Phase Facilities Phase iii)
ADNOC at Abu Dhabi UAE.
From Jan 2016 to June 2018 working with M/s. Vishal Enterprises Engineers and Contractor, as a
Mechanical supervisor (commissioning mechanical Hydro test) handling project of RIL J3 ROGC
Worked at J3 Program, World largest refinery and petrochemicals complex, Jamnagar Gujarat.
From June 2014 to Dec 2015: Vishal Enterprises Engineers and Contractor, as a Engineer
(commissioning mechanical Hydro test) Worked at J3 Program, Polyethylene Project refinery and
petrochemicals complex, At Hazira Surat.
MARCH 2012 to May 2014: Vishal Enterprises Engineers and Contractor Reliance oil and Gas, at
PE1&PE2. As a Supervisor (commissioning mechanical and Hydro test) Mechanical Worked at J3
Program, refinery and petrochemical complex, Dahej Gujarat.
June 2011 to February 2012: Dheeraj Engineers and Contractor, at Jamnagar Reliance Oil and
Gas. As a Supervisor (Mechanical Piping and Hydro test) Mechanical Worked at J3 Program,
refinery and petrochemical complex, Jamnagar Gujarat.
Job Responsibility:
11 years of Excellent experience in Oil & Gas, Refinery, Tank Farm, Export Unit
Loading Mixing Manifold (LMM) Petrochemical, Power Plant Pre-commissioning,
commissioning, Operation & Maintenance.
Authorised Job Performer (JP) From ADNOC.
Authorised PTW Holder (KOC) Kuwait.
Operation and commissioning of CPF plant both utility and process.
Start-up of different well which contain shocker pump connected with different
pattern.
Plant Start-up and shutdown activities.
Handled start up, shutdown and Emergency operation.
Handling Hot Oil System, Hot oil Heater, Heating Medium Pump, Crude, Ethylene,
Propylene, Nitrogen, Fuel Gas Etc. in 4 Trains.
Involved in Pre-Commissioning, Commissioning of LP and HP Flare Systems.
Start-up of Pumps, Turbines, Compressors and its axillaries etc.
Involved in MRT, SOLORUN of De-salter pumps, Export oil Booster pumps, Hot Oil
pumps, Reflex pump, Feed Pumps Etc.
Routine check-up of all process and Utilities equipment.
Reporting all the abnormalities and failure to the control room and to take corrective
measure
Controlling and maintaining process parameters as per technical region.
Troubleshooting of the process operations during power failure, Instrument Air
failure, Utility and DCS failure.
Change over operation of pumps, filters, beds etc.
Pertaining to Safe Operations of the Unit & operating the equipment’s as per
standard operating procedure (SOP).
Co-ordinate with the technical and maintenance service department to solve the
problem.
Health monitoring LLF of Rotating Equipment.
To co-ordinate with the Panel Engineers for trouble free operation
Preparation of Hydro test of pipe lines, leakage test of pipelines
Flushing and cleaning of pump lines, System Dry out, inerting
Systematic Confirmation check of equipments, static de energized test of
Equipments
Preparation of Preliminary Check Functional Check and pre start-up activities
Job allocation to certify sub agencies as per the work order issued.
Manpower & Resource Planning so as to When, Why and What.
To resolve any issues hampering progress on day to day basis & to interact with
client engineer for job issue.
Ensuring that the planned output is achieved from manpower, machinery and
materials.
To ensure that the quality of work done as per specification and ISO standard.
Prepare weekly and monthly reports and ensure timely submission to the site in
charge.
Monitoring of various welding process likes SMAW, GTAW, as per WPS requirement.
Ensure that execution checklists are being prepared at site.
Coordination with various departments like planning, design, billing, contractor and
purchase.
Adept in handling operating activities of the operations unit, system and equipment
in the refinery to process feed stock.
Co-ordinate in Pre-Commissioning & Commissioning Activity of all Rotating and
Static Equipment’s. Functional Test of all Plant Equipment’s. Carried out
commissioning activity related to LOOP CHECK, FINAL BOXUP, PSSR,
HYDRO TEST, CARD-BOARD BLASTING, SHEET BLASTING, STEAM
BLOWING, AIR BLOWING, GROSS LEAK TEST, NITROGEN PURGING, MRT &
SOLO RUN OF ROTATING EQUIPMENT & CONDITION MONITORING,
WALKTHROUGH AS PER P&ID, PUNCH POINT RECTIFICATION, BORESCOPE
ETC.
Involved in Operation of Refinery in Field, checking LEL and Isolating Line before
Maintenance work to ensure safe work practice , knowledge of PTW including Risk
Assessment ,Job hazard Analysis & Tool Box Talk Etc. for safe work practice
Review of PFD, PID & Vendor documents, drawings.
Identify systems, sub-systems & mark-up
Prepare of System, Sub-system and Test Packs, Mark-up for Project upload in
WINPCS (PETRO IT) (Completion Assurance Management System).
Coordinating with test pack engineer for preparation of piping test packs by test
pack limit mark-up.
Completion of Inspection Test Reports (ITR-A, B and C) and Test Packs related to
Commissioning activities.
Prepare Punch list and upload in PETRO IT tracking and Punch liquidation & will
coordinate onsite Project Start-up.
Responsible for Pre-Commissioning, Commissioning and final Operation of client
Project.
Will be responsible for Planning and Coordinating Site execution with Construction
group.
Track and report to the Commissioning and Start-up Schedule Status.
Prepare Pre-Commissioning, Commissioning and Start-up procedures for Nitrogen
Purging, Steam and Condensate flushing of pipe lines and to perform the activities
on site.
Review and approval of Pre-Commissioning / Commissioning method statement
plans for Project.
Participate in system Walk down with Construction, Commissioning and operation
for punch listing & final Conformation check list.
Preparation of PTW, while adhering to HSE policies (Permit Receiver)
Awareness and safety Training Certification of H2S, LOTO, CONFINED SPACE,
WORK AT HEIGHT, LSR, ZERO Rules ETC.
Plan, mobilize man power, required tools & materials,
Mechanical Completion walk-down,
Develop Punch list, prioritize, attend & close out
Temporary Blinds list, Electrical LOTO (Lockout & tag out)
Pre-commissioning activities like Pressure tests (leak test, re-instatement,
torqueing) Drying &, inertization.
Participate in PSSR, clearing punch points and close out
Vessel inspection & cleaning
Control logics & loop check
Prepare equipment & systems for commissioning & test run.
NOTABLE CREDITS:
Key Skills
IT SKILL
Strength
Personal Dossier
Declaration
I solely reaffirm with confidence that all the above information is true and correct to
the best of my knowledge. For any Contradiction of the above I will only be taking
responsibility.
Place. KUWAIT
Ekramullah
Jameel