Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 75 views

    Steps of Updating PLC Program by Pendrive

    Uploaded by

    Ruben Cabrera
    1) Open PLC programming software and generate a .PMW file of the PLC program. 2) Copy the .PMW file to the root directory of a FAT32 USB drive. 3) Plug the USB drive into the HMI PLC and select the .PMW file to update the PLC program.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Steps of Updating PLC Program by Pendrive

    Uploaded by

    Ruben Cabrera
    75 views5 pages
    1) Open PLC programming software and generate a .PMW file of the PLC program. 2) Copy the .PMW file to the root directory of a FAT32 USB drive. 3) Plug the USB drive into the HMI PLC and select the .PMW file to update the PLC program.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) Open PLC programming software and generate a .PMW file of the PLC program. 2) Copy the .PMW file to the root directory of a FAT32 USB drive. 3) Plug the USB drive into the HMI PLC and select the .PMW file to update the PLC program.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    75 views5 pages

    Steps of Updating PLC Program by Pendrive

    Uploaded by

    Ruben Cabrera
    1) Open PLC programming software and generate a .PMW file of the PLC program. 2) Copy the .PMW file to the root directory of a FAT32 USB drive. 3) Plug the USB drive into the HMI PLC and select the .PMW file to update the PLC program.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Steps of updating PLC program by pendrive

    1. Attention:
    1) EX2N/EX3G-KH/KHA/HA series HMI PLC all in one supports U disk update
    PLC function, and HMI firmware version is V5.78 and above)
    2) If the product is an EX3G-KH/KHA/HA series HMI PLC all in one, you must
    first change the PLC type to FX2N(C) in the PLC software, as shown below.

    3) The PLC program must not contain instructions that are not supported by
    the FX2N series PLC, otherwise it will not be saved.
    4) The function of "Write to FXGP (WIN) format file" is supported only in
    GX8.52 and GX8.86 versions.

    2. Operation steps

    1) Open the PLC programming software (GX developer 8.52E or GX developer 8.86Q)
    and click "Project - Write other files in the format --- Write FXGP (WIN) format file", as
    shown in the figure:

    1 www.coolmayplc.com
    Before execution, you need to enter the file name, and check the "Program Files"
    option in "Parameter + Program" to set the file storage path (but only support the root
    directory of the disk), and then click Execute, Generate "**.PMW" in the root directory of
    the set disk. This example is generated as "24.PMW", as shown in the figure:

    2 www.coolmayplc.com
    2) Insert the USB flash drive (the file system is FAT32) onto the computer, copy and
    paste the “24.PMW” file into the root directory of the USB flash drive (ie, do not put it in
    any folder)---plug the USB flash drive into the product USB. Port---- will jump to the USB
    setting screen, click "Update *.HW6/.PMW file", enter the current password of the touch
    screen project (default is 12345678), as shown in the
    figure:

    3 www.coolmayplc.com
    3) In the lower right corner of the USB setting screen, find the .PMW file to be updated.
    Double-click - click "Yes" to execute the download task, as shown in the figure:

    4 www.coolmayplc.com
    4) After the progress bar is updated, the touch screen will automatically restart. After the
    restarting, the PLC program is successfully downloaded to the HMI PLC all in one.

    Attachment: How to export .PMW file from 3G series plc program

    Use the serial cable 232 or 485 to connect the PLC, → open the reading tool, select the
    serial port corresponding to the computer device manager, and then read it in. → the step
    starts counting. When the counting does not go, close the software. → This will be in the
    directory. Generate a duqu.pmw file, → copy this file to the U disk and use the touch
    screen to write to the PLC program (moban.PMW to be placed in the same directory as
    the PMW read tool EXE)

    5 www.coolmayplc.com

    You might also like