Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Fuji Network Print Server - 04

Download as pdf or txt
Download as pdf or txt
You are on page 1of 83

Fuji Network Print Server/Network Printer

FN-PS551/DRYPIX1000/DRYPIX3000/FM-DP L

Modality Connection List

Fuji Photo Film Co., Ltd

006-205-03
2002.4.9
1/7
Contents

1. Application----------------------------------------------------------------------------------- P3
2. How to read this list ----------------------------------------------------------------------- P3
2.1 Modality Type------------------------------------------------------------------------- P3
2.2 Host Vendor--------------------------------------------------------------------------- P3
2.3 Modality Name------------------------------------------------------------------------ P3
2.4 Protocol -------------------------------------------------------------------------------- P3
2.5 Cable Connected Type------------------------------------------------------------- P3
2.6 Image matrix & Bytes per pixel -------------------------------------------------- P4
2.7 Tested Software Ver. of FN-PS551 -------------------------------------------- P4
2.8 Connected DICOM Protocol ----------------------------------------------------- P4
2.9 Connected TOSHIBA Protocol -------------------------------------------------- P5
2.10 Setup ID No.------------------------------------------------------------------------ P5
2.11 Gamma table No. for SAR or BAR ------------------------------------------- P5
2.12 Magnify for SSM or A-VR-------------------------------------------------------- P6
2.13 Tested environment Host Name & Printer AE Title ---------------------- P6

3.System Components---------------------------------------------------------------------- P6
a) FN-PS551-------------------------------------------------------------------------------- P6
3.1 DICOM TYPE------------------------------------------------------------------------ P6
3.2 TOSHIBA TYPE -------------------------------------------------------------------- P7
b) DRYPIX1000/DRYPIX3000---------------------------------------------------------- P7
c) FM-DP L----------------------------------------------------------------------------------- P7

006-205-03
2002.4.9
2/7
1. Application
This “Modality Connection List” apply to the Fuji Network Print Server FN-PS
551 and Network Printer DRYPIX1000/DRYPIX3000/FM-DP L when in use with
CT, MRI and other Modalities.

2. How to read this list


Modality Information
Qualified modalities are listed.
Fuji qualified these modalities with connectivity testing.

2.1 Modality Type


Commonly used modality type is abbreviated as below.
CT :Computed Tomography
MRI :Magnetic Resonance Imaging
DSA :Digital Subtraction Angiography
NM :Nuclear Medicine
DR :Digital Radiography
RI :Radio Isotope
WS :Workstation
US :Ultra Sound
Other :Modalities other than above

2.2Host Vendor
The manufacturer or the dealer of the modality is listed.

2.3Model Name (Software Version)


Medical imaging system and software version of the modality is listed.

2.4Protocol
The protocol type for connection , DICOM or Toshiba Network.

2.5Cable Connected Type


The cable connected type defines network connector type on modality.
100BASE-TX, 10BASE-T or 10BASE-5.

006-205-03
2002.4.9
3/7
2. 6 Image matrix & Bytes per pixel
Image matrix and bytes per pixel are listed to calculate the maximum data
volume for TOSHIBA Protocol. These are not required for DICOM
Protocol.

Required Parameters
These parameters must be set on FN-PS551 or DRYPIX Net Tool.

2.7Tested Software Ver. of FN-PS551 and DRYPIX 1000/3000


The software version of FN-PS551 and DRYPIX 1000/3000 which the
connectivity between FN-PS551 , DRYPIX 1000/3000 and modality is
confirmed.
Axx:xx is confirmed software version of FN-PS551.
/Axx: xx is confirmed software version of DRYPIX 1000/3000.

2.8Connected DICOM Protocol


The client settings for DICOM protocol on FN-PS551 or DRYPIX Net Tool.
0107H Warning : This parameter specifies the response of “Attribute list
error ”.
0116H Warning : This parameter specifies the response of “Attribute value
out of range ”.
B604H Warning : This parameter specifies whether to issue notification
that reduction has been used when “Image size is larger
than image box ” is occurred.
N-Event-Report RQ : This parameter specifies whether to respond “N-
Event-Report RQ ”.
Use extension format : This parameter specifies whether to use extension
format for the special client and this one is available
Ver. A02 or later.
Use default annotation : This parameter specifies whether to use
annotation for the special client and this one is
available FN-PS551 Ver. A02 or later.

006-205-03
2002.4.9
4/7
Change film size : This parameter specifies whether to select one of the
following parameters and this one is available FN-
PS551 Ver. A05 or later.
[0:0116H(W)] (default value)
Enables film to be changed. Details of errors which the
film is changed can be set whether to send to the client
or not by setting [Attribute list error (0107H
Warning)],[Attribute value out of range ( 0116H Warning
)], [Image size is larger than image box (B604H
Warning)].
[272:0110H (F)]
Details of error are sent to the client , without changing
the film.
[21317:5345H (F)]
Details of errors ( unique values for Fuji Film systems )
are sent to the client , without changing the film.
Use system (Data transfer) timeout : This parameter specifies whether to
select [disable,0:No] (ignore timeout)
or [enable,1:Yes] (enable timeout ,
default) and this one is available FN-
PS551 Ver. A05 or later.

Please refer to FN-PS551 Service manual (7.5 Add , Modify ,or Delete a
Client [Clients] of Service Utility in Maintenance ) and DRYPIX Net Tool
Operation manual (5.2 Client Setting ) in detail.

2.9Connected TOSHIBA Protocol


Overlay threshold density is described.
Please refer to FN-PS551 Service manual (7.5 Add , Modify ,or Delete a
Client [Clients] of Service Utility in Maintenance ) in detail.

2. 10Setup ID No.
This describes the necessary parameters which you must or had better to
set on your FN-PS551 , DRYPIX1000/3000 and FM-DP L.
The parameters are required only for the special modalities.

Recommended Parameters
Fuji recommends you to setup these parameters at first.

2.11Gamma table No. for SAR or BAR


Gamma table No. and other tone correction parameters are recommended.
The recommended parameters are qualified by Fujifilm and Host vender.
“ -“ means no recommendation.

006-205-03
2002.4.9
5/7
2.12Magnify for SSM or A-VR
Magnify method and other smoothing correction parameters are
recommended .
The recommended parameters are qualified by Fujifilm and Host vender.
“ -“ means no recommendation.

2. 13Tested environment Host Name & Printer AE Title


Host Name and Printer AE Title are listed that are used in connectivity test.
If it is difficult to know Host Name and Printer AE Title on modality, please
ask the host vender engineers to set these Host Name and AE Title.

3. System Components
Please check the following items when ordering, and refer to each “Product
Specifications” in details.

a) FN-PS551
3.1 DICOM TYPE
-Standard
(1) FN-PS 551 main unit
FN-PS 551 D A* E
(The code A* be replaced with A1,A2 and so on, according to upgrading in the
future.)
(2) Print I/F board
E-I/F BD FOR ISA E or E-I/F BD FOR PCI E
(3) Print connection cable
ODF/PS IF CABLE *M E (*:5,15,30,45,60,100,150)

-Option
(1) Addition software
FN-PS 551 TOSHIBA KEY SOFT E
(2) Connector conversion cable
MF-PS 667/DMS IF CBL E
(3) Power cable
HIC 655 POWER CORD EU 200V E
HIC 655 POWER CORD UK 200V E

006-205-03
2002.4.9
6/7
3.2 TOSHIBA TYPE
-Standard
(1) FN-PS 551 main unit
FN-PS 551 T A* E
(The code A* be replaced with A1,A2 and so on, according to upgrading in the
future.)
(2) Print I/F board
E-I/F BD FOR ISA E or E-I/F BD FOR PCI E
(3) Print connection cable
ODF/PS IF CABLE *M E (*:5,15,30,45,60,100,150)

-Option
(1) Addition software
FN-PS 551 DICOM KEY SOFT E
(2) Connector conversion cable
MF-PS 667/DMS IF CBL E
(3) Power cable
HIC 655 POWER CORD EU 200V E
HIC 655 POWER CORD UK 200V E

b) DRYPIX1000/DRYPIX3000
(1) DICOM Connection Board
DP I/F DICOM E
( LAN90A board , Ferrite core , DICOM software FD )

c) FM-DP L
(1)DICOM Connection Board
DP I/F DICOM E
( LAN90A board , Ferrite core , DICOM software FD )

(2)DICOM Connection Expanded Memory


DP MEM FOR DICOM E
(Expanded DRM MEM11A)

006-205-03
2002.4.9
7/7
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - Acuson
100BASE-TX not not not
1 US Acuson 128XP/QVD 3.0 DICOM A03 disabled No No 0:0116H(W) Yes - G23
10BASE-T indicate indicate indicate
Dmax:300
- - fuji-printer
Dmin:020
Contrast:100

- SAR - Acuson

100BASE-TX not not not


2 US Acuson Aspen 3.0 DICOM A03 disabled No No 0:0116H(W) Yes - G23
10BASE-T indicate indicate indicate
Dmax:300
- - fuji-printer
Dmin:020
Contrast:100

- SAR - Acuson
Acuson not not not
3 US Aspen 6.0 6.0 DICOM 10BASE-T A04 disabled No No 0:0116H(W) Yes -
Corporation indicate indicate indicate
- G23 - -

- SAR - Acuson

100BASE-TX not not not G23


4 US Acuson Sequoia 4.0 DICOM A03 disabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate Dmax:300
- - fuji-printer
Dmin:020
Contrast:100
- SAR - Acuson

Acuson not not not G23


5 US Sequoia 5.05 DICOM 10BASE-T A04 disable No No 0:0116H(W) Yes -
Corporation - indicate indicate indicate Dmax:300 - fuji-printer
Dmin:017

- SAR - SEQUOIA_000

not not not


6 US Acuson Sequoia 6.01 DICOM 10BASE-T A05 disable No No 0:0116H(W) Yes - G23
indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:17

006-205-03
02.4.9 Page1/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - kinetix
WS3000 not not not
7 WS Acuson 2.1 DICOM 10BASE-T A04 disable No No 0:0116H(W) Yes - AC01 G23
(Kinetics) indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:024
- SAR - -
ADAC G11
10BASE-T not not not
8 WS Geometrics Pinnacle 5.2 DICOM A03 disabled No No 0:0116H(W) Yes - Dmax:300
100BASE-TX - indicate indicate indicate - fuji-printer
Inc. Dmin:024
Contrast:100
- PaxPort
10BASE-T not not not
9 Others Agfa PaxPort 2.2.04 DICOM A04 disable No No 0:0116H(W) Yes - AG01
100BASE-TX - indicate indicate indicate fuji-printer

- SAR SSM VIPS


ADC 10BASE-T Yes
10 WS Agfa 1105 DICOM A04 indicate indicate indicate enable No 0:0116H(W) Yes - AG02 G17
(Agfa Digital Center) 100BASE-TX =EV
- Dmax:300 MEDIUM
Dmin:0
- SAR - ALINewport
Agilent
Technologies ImagePoint 10BASE-T not not not G23
11 US 2.1.0 DICOM A04 disable No No 0:0116H(W) Yes -
(Hewlett HX 100BASE-TX - indicate indicate indicate Dmax:300 - fuji-printer
Packard) Dmin:016

- SAR - ALINewport
ALI
ALI 10BASE-T not not not G23
12 US Technologies 2.1.0 DICOM A04 disable No No 0:0116H(W) Yes - AL01
NewPort 100BASE-TX - indicate indicate indicate Dmax:300 - fuji-printer
Inc.
Dmin:016

006-205-03
02.4.9 Page2/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - UltraPACS
ALI
4.1PL0 100BASE-TX not not not
13 WS Technologies UltraPACS DICOM A04 disable No No 0:0116H(W) Yes - G17
Build 15 10BASE-T indicate indicate indicate
Inc. - Dmax:300 - fuji-printer
Dmin:0

- SAR - sd100

100BASE-TX not not not G17


14 Others Analogic SD-100 2.3 DICOM A00 disable No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate Dmax:300
- fn-ps551
Dmin:013
Contrast:100

- SAR - AAM-CA
Aspect
not not not G11,17,23
15 Others Electronics AAM-CA 3.07L DICOM 10BASE-T A04
indicate indicate indicate
disable No No 0:0116H(W) Yes -
Inc. - Dmax:300 - fn-ps551
Dmin:017

- SAR - HDI-5000

not not not


16 US ATL HDI-3000 1.01 DICOM 10BASE-T A03 disabled No No 0:0116H(W) Yes - G23
indicate indicate indicate
Dmax:300
- - fuji-printer
Dmin:018
Contrast:100

006-205-03
02.4.9 Page3/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - HDI-5000

not not not G23


17 US ATL HDI-5000 1.01 DICOM 10BASE-T A03 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - fuji-printer
Dmin:018
Contrast:100
- SAR - NT100
Camtronics
not not not
18 Others Medical NT100 5.5 DICOM 10BASE-T A04 disable No No 0:0116H(W) Yes -
- indicate indicate indicate G17 - fn-ps551
Systems Inc.

- SAR - CEDARA
Cedara 100BASE-T not not not G12
19 MRI Harmony MR R1.2F DICOM A05 disable No No 0:0116H(W) Yes - CE01
Software Corp. 10BASE-T - indicate indicate indicate Dmax:300 - fuji-printer
Dmin:20

- SAR
10BASE-2 not not not
20 WS CMS Inc. Focus 2.7.0 DICOM A05 disable No No 0:0116H(W) Yes - CM01
10BASE-T indicate indicate indicate G17
- Dmax:300
Dmin:20

- SAR -

100BASE-TX not not not


21 WS DEJARNETTE IMAGESHARE 3.0.2 DICOM A00 disable No No 0:0116H(W) Yes - G17
10BASE-T indicate indicate indicate
Dmax:300
- -
Dmin:013
Contrast:100

- SAR - Dejarnette
Dejarnette
ImageShare 100BASE-TX not not not Yes
22 WS Reserch 2.02 DICOM A04 disable No 0:0116H(W) Yes - DE01
CR 10BASE-T indicate indicate indicate ID=CR
Systems G17
- Dmax:300 - fuji-printer
Dmin:0

006-205-03
02.4.9 Page4/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR -

100BASE-TX not not not


23 WS DEJARNETTE LASERSHARE 3.0.2 DICOM A00 disable No No 0:0116H(W) Yes - G17
10BASE-T indicate indicate indicate
Dmax:300
- -
Dmin:013
Contrast:100

- SAR -
Direct
iiRAD 100BASE-TX not not not
24 Others Radiography 1.3.X DICOM A04 disable No No 0:0116H(W) Yes - G17
DR1000 10BASE-T indicate indicate indicate
Corp. - Dmax:300 -
Dmin:017

- SAR - DIRECT_XRAY

Eastman Kodak 100BASE-TX not not not YES G17


25 Others DR9000 1.4.0.0 DICOM A05 disable No 0:0116H(W) Yes - ES01
Company 10BASE-T indicate indicate indicate ID=CR Dmax:300
- - fuji-printer
Dmin:20

- SAR - omnipro

100BASE-TX not not not


26 WS ELSCINT OMNI PRO DICOM A00 disabled No No 0:0116H(W) Yes - G17
10BASE-T indicate indicate indicate
Dmax:300
- - Printer1
Dmin:018
Contrast:100

- SAR A-VR

Sharp
edge
detection
OFF
100BASE-TX not not not YES 21317:5345H( detective
27 WS FUJIFILM CR Console A00 DICOM A04 disable No Yes - FU01 G49
10BASE-T indicate indicate indicate ID=CR F) level
- Dmax:300
600
Dmin:0
sharpness
60
character
color
White

006-205-03
02.4.9 Page5/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR A-VR -

SHARP
Software edge
version A05 or detection
newer OFF
not not not Yes
28 WS FUJIFILM QA-WS771 A01 DICOM 10BASE-T A02 disable No 21317:5345H Yes - FU01 G49 detection
indicate indicate indicate ID=CR
Dmax:300 level
- -
until A04 Dmin:0 600
272:0110H(F) Contrast:100 sharpness
60
character
color
White

- SAR A-VR

Sharp
edge
detection
OFF
100BASE-TX not not not YES 21317:5345H(
29 WS FUJIFILM XG-1 Console A00 DICOM A04 disable No Yes - FU01 detective
10BASE-T indicate indicate indicate ID=CR F) G49
level
- Dmax:300
600
Dmin:0
sharpness
60
character
color
White

006-205-03
02.4.9 Page6/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold
o2t2
- SAR -

not not not G17


30 CT GE CT/e R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100
o2t2
- SAR -

HIGH SPEED not not not G17


31 CT GE R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
Advantage indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100

o2t2
- SAR -

HIGH SPEED not not not G17


32 CT GE R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
Advantage CT/I indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100
o2t2
- SAR -

HIGH SPEED not not not G17


33 CT GE R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
Advantage CT Line indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100
o2t2
- SAR -

HIGH SPEED not not not


34 CT GE 4.0 DICOM 10BASE-T A04 disabled No No 0:0116H(W) Yes - G17
CT Line indicate indicate indicate
- Dmax:300 - Printer1
Dmin:018

o2t2
- SAR -

not not not


35 CT GE HIGH SPEED DX/I R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate G17
- Dmax:300 -
Dmin:018

006-205-03
02.4.9 Page7/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold
o2t2
- SAR -

HighSpeed not not not


36 CT GE DICOM 10BASE-T A04 disabled No No 0:0116H(W) Yes - G17
DX/iB indicate indicate indicate
- Dmax:300 - Printer1
Dmin:018

o2t2
- SAR -

not not not G17


37 CT GE HIGH SPEED FX/I R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100

o2t2
- SAR -

not not not G17


38 CT GE HIGH SPEED LX/I R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100

o2t2
- SAR -

not not not G17


39 CT GE LIGHT SPEED QX/I R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100
o2t2
- SAR -

HighSpeed not not not


40 CT GE DICOM 10BASE-T A04 disabled No No 0:0116H(W) Yes - G17
ZX/I indicate indicate indicate
- Dmax:300 - Printer1
Dmin:018

o2t2
- SAR -

not not not


41 CT GE NX/i R2.7.2a DICOM 10BASE-T A04
indicate indicate indicate
disabled No No 0:0116H(W) Yes - G17
- Dmax:300 - Printer1
Dmin:018

006-205-03
02.4.9 Page8/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

o2t2
- SAR -

not not not


42 CT GE NXi PRO R2.7.2a DICOM 10BASE-T A04 disabled No No 0:0116H(W) Yes - G17
indicate indicate indicate
- Dmax:300 - Printer1
Dmin:018

o2t2
- SAR -

ProSpeed not not not


43 CT GE DICOM 10BASE-T A04 disabled No No 0:0116H(W) Yes - G17
AI indicate indicate indicate
- Dmax:300 - Printer1
Dmin:018

o2t2
- SAR -

Synergy not not not


44 CT GE DICOM 10BASE-T A04 disabled No No 0:0116H(W) Yes - G17
Hilight indicate indicate indicate
- Dmax:300 - Printer1
Dmin:018

- SAR - DRSGATEWAY

AdvantX Legacy DRS not not not


45 DR GE 2.2 DICOM 10BASE-T A05 disable No No 0:0116H(W) Yes - GE05
/ Gateway indicate indicate indicate
G15
- Dmax:300 - fuji-printer
Dmin:20

- SAR A-VR o2t2

not not not G17


46 MRI GE SIGNA HORIZON R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- SHARP
Dmin:018
Contrast:100

- SAR A-VR o2t2

not not not G17


47 MRI GE SIGNA HORIZON LX R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- SHARP
Dmin:018
Contrast:100

006-205-03
02.4.9 Page9/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR A-VR o2t2

SIGNA HORIZON not not not G17


48 MRI GE R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
LX1 indicate indicate indicate Dmax:300
- SHARP
Dmin:018
Contrast:100

o2t2
- SAR A-VR

SIGNA HORIZON not not not G17


49 MRI GE R2.7.2a DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
LX1a indicate indicate indicate Dmax:300
- SHARP
Dmin:018
Contrast:100
o2t2
- SAR A-VR

8.2
SIGNA HORIZON not not not G17
50 MRI GE (2.5.1 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
LX2 indicate indicate indicate Dmax:300
DICOM) - SHARP
Dmin:018
Contrast:100

006-205-03
02.4.9 Page10/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

o2t2
- SAR A-VR
8.3
SIGNA HORIZON not not not G17
51 MRI GE (2.7.3 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
LX3 indicate indicate indicate Dmax:300
DICOM) - SHARP
Dmin:018
Contrast:100

Cedara ISG - SAR -


ENTEGRA
Hardcopy 100BASE-TX not not not
52 NM GE DICOM A04 disabled No No 0:0116H(W) Yes - GE01 G14
server 10BASE-T indicate indicate indicate
software - Dmax:300 - fuji-printer
Dmin:20

- SAR -
ENTEGRA
100BASE-TX not not not
53 NM GE eNTEGRA DICOM A04 disabled No No 0:0116H(W) Yes - GE01 G14
10BASE-T indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:20

- SAR -
GENIE ENTEGRA
100BASE-TX not not not
54 NM GE GENIE 2.6 DICOM A04 disabled No No 0:0116H(W) Yes - GE01 G14
10BASE-T indicate indicate indicate
ver.213 - Dmax:300 - fuji-printer
Dmin:20

006-205-03
02.4.9 Page11/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR -
ENTEGRA
100BASE-TX not not not
55 NM GE Genie ACQ 2.5 DICOM A04 disabled No No 0:0116H(W) Yes - GE01 G14
10BASE-T indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:20

- SAR -
ENTEGRA
GE 100BASE-TX not not not
56 NM Millenium DICOM A04 disabled No No 0:0116H(W) Yes - GE01 G14
10BASE-T indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:20

- SAR -
ENTEGRA
PET 100BASE-TX not not not
57 NM GE 5.1 DICOM A04 disabled No No 0:0116H(W) Yes - GE01 G14
Advance 10BASE-T indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:20

- SAR -
Logiq 500
100BASE-TX not not not
58 US GE Logiq 400 V5.0 DICOM A04 disabled No No 0:0116H(W) Yes - G23
10BASE-T indicate indicate indicate
- Dmax:300 -
Dmin:20

- SAR -
Logiq 500
100BASE-TX not not not
59 US GE Logiq 500 V6.0 DICOM A04 disabled No No 0:0116H(W) Yes - G23
10BASE-T indicate indicate indicate
- Dmax:300 -
Dmin:20

- SAR -
Logiq 700
100BASE-TX not not not
60 US GE Logiq 700 9.0.5 DICOM A04 disabled No No 0:0116H(W) Yes - GE02 G23
10BASE-T indicate indicate indicate
- Dmax:300 -
Dmin:20

- SAR A-VR

100BASE-TX not not not G17


61 WS GE ADVANTAGE CR/QA 2.0 DICOM A00 disabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate Dmax:300
- SHARP Printer1
Dmin:013
Contrast:100

006-205-03
02.4.9 Page12/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR A-VR o2t2

ADVANTAGE AW3.1_ 100BASE-TX not not not G17


62 WS GE DICOM A00 disabled No No 0:0116H(W) Yes -
WORKSTATION 06.5 10BASE-T indicate indicate indicate Dmax:300
- SHARP Printer1
Dmin:013
Contrast:100

- SAR - fn-ps551

not not not G17


63 WS GE AMBER2 2.0 DICOM 100BASE-TX A03 enabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - FUJIDRY
Dmin:013
Contrast:100

- SAR - OEC_9800

OEC 9800 Mobile C- 100BASE-TX not not not G17


64 WS GE 10.0.03 DICOM A05 disable No No 0:0116H(W) Yes GE06
arm 10BASE-T indicate indicate indicate Dmax:300
- -
Dmin:20

- SAR - -

REVOLUTION 100BASE-TX not not not G17


65 WS GE 1_2_10 DICOM A02 enabled No No 0:0116H(W) Yes -
XQ/I 10BASE-T indicate indicate indicate Dmax:300
- -
Dmin:018
Contrast:100

Revolution - SAR -
Revolution XR/d
XR/d 100BASE-TX not not not Yes
66 WS GE V13.5.1 DICOM A04 disable No 0:0116H(W) Yes - GE03
(Condor) 10BASE-T indicate indicate indicate ID=CR G23
WS - Dmax:300 -
Dmin:20

006-205-03
02.4.9 Page13/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - RADworks
RADworks 5.0 100BASE-TX not not not
67 WS GE 5.0 DICOM A03 enabled No No 0:0116H(W) Yes - GE04 G17
Workstation 10BASE-T indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:018

- SAR SSM carino

G12,17
Dmax:300
Dmin:22
No. of
Point:4
No.1
Dp:180
first 100BASE-TX not not not Dshift:-4
68 CT Hitach PRATICO DICOM /A02 disable No No 0:0116H(W) Yes
edition 10BASE-T indicate indicate indicate No.2
- Sharp
Dp:200
Dshift:16
No.3
Dp:240
Dshift
-4
No.4
Dp:50
Dshift:-3

006-205-03
02.4.9 Page14/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

SAR SSM carino

G12,17
Dmax:300
Dmin:22
No. of
Point:4
No.1
Dp:180
first 100BASE-TX not not not Dshift:-4
69 CT Hitach PRONT DICOM - /A02 disable No No 0:0116H(W) Yes -
edition 10BASE-T indicate indicate indicate No.2
Sharp
Dp:200
Dshift:16
No.3
Dp:240
Dshift
-4
No.4
Dp:50
Dshift:-3

SAR SSM carino

G12,17
Dmax:300
Dmin:22
No. of
Point:4
No.1
Dp:180
first 100BASE-TX not not not
70 CT Hitach PRONT XE DICOM - /A02 disable No No 0:0116H(W) Yes - Dshift:-4
edition 10BASE-T indicate indicate indicate
No.2
Sharp
Dp:200
Dshift:16
No.3
Dp:240
Dshift
-4
No.4
Dp:50
Dshift:-3

006-205-03
02.4.9 Page15/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - Airis II
not not not
71 MRI Hitach Airis II 4.2P DICOM 10BASE-T A04 enabled No No 0:0116H(W) Yes - HI01 G23
indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:33

- SAR - Airis II
not not not
72 MRI Hitach Altaire DICOM 10BASE-T A04 enabled No No 0:0116H(W) Yes - HI01 G23
indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:33

- SAR - Airis II
not not not
73 MRI Hitach Stratis DICOM 10BASE-T A04 enabled No No 0:0116H(W) Yes - HI01 G23
indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:33

006-205-03
02.4.9 Page16/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR A-VR

G17,43
Dmax:3.00
Dmin:016
No. of
Point:4
Sharp
No.1
edge
Dp:2.00
detection
Dshift:-0.04
ON
C:1.00
Yes detection
74 DR Hitach Clavis View 2.50 DICOM 10BASE-T A04 indicate indicate indicate enable Yes 0:0116H(W) Yes - HI02 No.2
ID=HM level
- Dp:2.40
600
Dshift:-0.03
sharpness
C:1.00
80
No.3
character
Dp:0.50
color
Dshift:3
White
C:1.00
No.4
Dp:1.00
Dshift:-0.03
C:1.00

006-205-03
02.4.9 Page17/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR A-VR

G17,43
Dmax:3.00
Dmin:016
No. of
Point:4
Sharp
No.1
edge
Dp:2.00
detection
Dshift:-0.04
ON
C:1.00
DR2000X Yes detection
75 DR Hitach DICOM 10BASE-T A04 indicate indicate indicate enable Yes 0:0116H(W) Yes - HI02 No.2
Clavis ID=HM level
- Dp:2.40
600
Dshift:-0.03
sharpness
C:1.00
80
No.3
character
Dp:0.50
color
Dshift:3
White
C:1.00
No.4
Dp:1.00
Dshift:-0.03
C:1.00

006-205-03
02.4.9 Page18/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR -
IMACOM
Digistar not not not G17
76 WS IMACOM INC. Digistar DICOM 10BASE-T A03 enabled No No 0:0116H(W) Yes -
3.0 indicate indicate indicate Dmax:300
workstation - -
Dmin:020
Contrast:100

- SAR - DMAX_TEST

not not not G17


77 DR INFIMED GOLD ONE DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:013
Contrast:100

- SAR - DSM

100BASE-TX not not not G23


78 Others LORAD DSM 1.0.2 DICOM A02 disabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate Dmax:300
- - fujiprinter1
Dmin:018
Contrast:100

- SAR - mri

Lunar/ 100BASE-TX not not not


79 MRI Artoscan 5.6B DICOM A04 disabled No No 0:0116H(W) Yes - G23
ESAOTE 10BASE-T indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:016

- SAR - mri

Lunar/ 100BASE-TX not not not


80 MRI E-scan 1.1A DICOM A04 disabled No No 0:0116H(W) Yes - G23
ESAOTE 10BASE-T indicate indicate indicate
- Dmax:300 - fuji-printer
Dmin:016

- SAR -

not not not


81 NM Marconi MERIDIAN DICOM 10BASE-T A05 disable No No 0:0116H(W) Yes - G17
indicate indicate indicate
- Dmax:300 -
Dmin:13

006-205-03
02.4.9 Page19/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- - - Merger1
not not not
82 Others MERGE XPI INTERFACES 2.4 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate
- - - printer1

- SAR - EV4

not Yes G19


83 WS Philips Easy Vision R4.2 DICOM 10BASE5 A02 indicate indicate enabled No 0:0116H(W) Yes -
indicate ID=EV Dmax:300
- - Printer1
Dmin:0
Contrast:100

- SAR - omnipro

100BASE-TX not not not G17


84 CT PICKER HELICAT DICOM A00 disabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100

- SAR - omnipro

100BASE-TX not not not G17


85 CT PICKER MX8000 DICOM A00 disabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100

- SAR - omnipro

100BASE-TX not not not G17


86 CT PICKER MX TWIN DICOM A00 disabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100

006-205-03
02.4.9 Page20/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - omnipro

100BASE-TX not not not G17


87 CT PICKER SELECT DICOM A00 disabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100

- SAR - PickerCT

not not not G11


88 CT PICKER ULTRA Z 1.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes - PI01
indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100

- SAR - DMAX_TEST

not not not G17


89 DR PICKER D-MAX 1.216 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:013
Contrast:100

- SAR - mr1

not not not


90 MRI PICKER APOLO 10.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes - G17
indicate indicate indicate
Dmax:300
- - Printer1
Dmin:013
Contrast:100

- SAR - mr1

not not not G17


91 MRI PICKER ASSET 10.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:013
Contrast:100

006-205-03
02.4.9 Page21/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - mr1

not not not G17


92 MRI PICKER ECLIPSE 10.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:013
Contrast:100

- SAR - mr1

not not not G17


93 MRI PICKER EDGE 10.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:013
Contrast:100

- SAR - mr1

not not not G17


94 MRI PICKER EXP 10.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- Printer1
Dmin:013
Contrast:100

SAR -
Picker Outlook
Outlook not not not G17
95 MRI Picker G4.1 DICOM 10BASE-T A03 disabled No No 0:0116H(W) Yes - PI02
MRI indicate indicate indicate Dmax:300
- - fuji-printer
Dmin:024
Contrast:90

- SAR - mr1

not not not G17


96 MRI PICKER POLARIS 10.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:013
Contrast:100

- SAR - mr1

not not not G17


97 MRI PICKER VISTA 10.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:013
Contrast:100

006-205-03
02.4.9 Page22/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - PickerNM

not not not G17


98 NM PICKER ODESSEY 1.1 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:013
Contrast:100

- SAR - mr1

not not not G17


99 WS PICKER TWINSTAR 10.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - Printer1
Dmin:013
Contrast:100

- SAR - mr1

not not not


100 WS PICKER VISTAR 10.0 DICOM 10BASE-T A00 disabled No No 0:0116H(W) Yes - G17
indicate indicate indicate
Dmax:300
- - Printer1
Dmin:013
Contrast:100

- SAR - omnipro

100BASE-TX not not not G17


101 WS PICKER MX VIEW DICOM A00 disabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate Dmax:300
- - Printer1
Dmin:018
Contrast:100

- SAR NdPrintSCU

10BASE-2 not not not


102 WS Sclmage Inc. NETRA-MD 2.00.00 DICOM A05 disable No No 0:0116H(W) Yes - SC01 G17
10BASE-T indicate indicate indicate
Dmax:300
- fuji-printer
Dmin:20

006-205-03
02.4.9 Page23/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR -

SHIMADZU 100BASE-TX not not not


103 DR DigitexPro 1.01 DICOM A04 enabled No No 0:0116H(W) Yes - SH01 G17
Corporation 10BASE-T indicate indicate indicate
- Dmax:300 -
Dmin:018

- SAR A-VR

G43
Dmax:300
Dmin:22
Contrast:100 Sharp
No. of edge
Point:4 detection
No.1 ON
V4.1(Syst
SHIMADZU 100BASE-TX not not not Dp:100 detective
104 DR Digitex Pro DAR3000 em)V1.0( DICOM /A02 disable No No 0:0116H(W) Yes -
Corporation 10BASE-T indicate indicate indicate Dshift:10 level
DICOM) -
No.2 800
Dp:160 sharpness
Dshift:9 80
No.3 character
Dp:240 color
Dshift:5 White
No.4
Dp:70
Dshift:-2

SAR A-VR DCMPrint_bg

Sharp
edge
G14
detection
Dmax:230
ON
SHIMADZU 1.0(DICO 100BASE-TX not not not Dmin:18
105 NM SET-080Alpha DICOM - /A02 enable No No 0:0116H(W) Yes - detective
Corporation M) 10BASE-T indicate indicate indicate Contrast:100
level
No. of
800
Point:1
sharpness
No.1
80
Dp:165
character
Dshift:-2
color
White

006-205-03
02.4.9 Page24/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR A-VR DCMPrint_bg

Sharp
edge
G14
detection
Dmax:230
ON
SHIMADZU 1.0(DICO 100BASE-TX not not not Dmin:18
106 NM SET-2000W DICOM /A02 enable No No 0:0116H(W) Yes - detective
Corporation M) 10BASE-T indicate indicate indicate Contrast:100
level
- No. of
800
Point:1
sharpness
No.1
80
Dp:165
character
Dshift:-2
color
White

006-205-03
02.4.9 Page25/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR -

SHIMADZU 100BASE-TX not not not


107 WS CT View 1.01 DICOM A04 enabled No No 0:0116H(W) Yes - SH02 G17
Corporation 10BASE-T indicate indicate indicate
- Dmax:300 -
Dmin:018

049SA1
- SAR -
MR02DBPR
SOMARIS not not not
108 CT SIEMENS SOMATOM DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes - G17
/4VB40 indicate indicate indicate
Dmax:300
- - FUJI_PS551
Dmin:020
Contrast:100

- SAR SSM
Somaris
SOMATOM PLUS4 100BASE-TX Yes G17
109 CT SIEMENS VA42B DICOM A02 indicate indicate indicate enabled No 0:0116H(W) Yes - SI01
VOLUME ZOOM 10BASE-T ID=EV Dmax:280
- SHARP
Dmin:018
Contrast:100

- SAR SSM
Somaris 5 Somaris
Somatom
VA11A 100BASE-TX not not not
110 CT SIEMENS Volume DICOM A04 disabled No No 0:0116H(W) Yes - SI03 G17
(Syngo 10BASE-T indicate indicate indicate
Access - Dmax:300 SHARP
VA42M)
Dmin:018

006-205-03
02.4.9 Page26/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR SSM
Somaris 5 Somaris
Somatom
VA11A 100BASE-TX not not not
111 CT SIEMENS Volume DICOM A04 disabled No No 0:0116H(W) Yes - SI03 G17
(Syngo 10BASE-T indicate indicate indicate
Zoom - Dmax:300 SHARP
VA42M)
Dmin:018

049SA1
- SAR -
MR02DBPR
NUMARIS
not not not G17
112 MRI SIEMENS MAGNETOM 35 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
VA11A - - FUJI_PS551
Dmin:20
Contrast:100

- SAR SSM NUM4

Magnetom 100BASE-TX not not not


113 MRI SIEMENS DICOM A04 disabled No No 0:0116H(W) Yes - SI03 G17
Harmony 10BASE-T indicate indicate indicate
- Dmax:300 Sharp
Dmin:20

006-205-03
02.4.9 Page27/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR SSM NUM4


Magnetom
Jazz 100BASE-TX not not not
114 MRI SIEMENS VA13A DICOM A04 disabled No No 0:0116H(W) Yes - G17
Numaris 10BASE-T indicate indicate indicate
Ortho - Dmax:300 Sharp
Dmin:20

- SAR SSM NUM4

Magnetom 100BASE-TX not not not


115 MRI SIEMENS DICOM A04 disabled No No 0:0116H(W) Yes - SI03 G17
Sonata 10BASE-T indicate indicate indicate
- Dmax:300 Sharp
Dmin:20

- SAR SSM NUM4


Numaris 4
Magnetom VA11A 100BASE-TX not not not
116 MRI SIEMENS DICOM A04 disabled No No 0:0116H(W) Yes - SI03 G17
Symphony (Syngo 10BASE-T indicate indicate indicate
VA430) - Dmax:300 Sharp
Dmin:20

- SAR - ICON

100BASE-TX not not not


117 NM SIEMENS ICON P 1.3 DICOM A00 disabled No No 0:0116H(W) Yes - SI02 G17
10BASE-T indicate indicate indicate
Dmax:300
- - FUJIDRY
Dmin:013
Contrast:100

006-205-03
02.4.9 Page28/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR SSM esoft

100BASE-TX not not not


118 Others SIEMENS e.soft 1.5 DICOM A04 disabled No No 0:0116H(W) Yes - SI04
10BASE-T indicate indicate indicate G17
- Dmax:300 Sharp
Dmin:20

- SAR SSM FLCOMPACT


Fluorospot 100BASE-TX not not not
119 Others SIEMENS VB00A DICOM A04 disabled No No 0:0116H(W) Yes - SI05
Compact 10BASE-T indicate indicate indicate G43
- Dmax:300 Sharp
Dmin:20

- SAR SSM FLTOP


Fluorospot VC10/ 100BASE-TX not not not
120 Others SIEMENS DICOM A04 disabled No No 0:0116H(W) Yes - SI03
TOP VD10 10BASE-T indicate indicate indicate G17
- Dmax:300 Sharp
Dmin:20

- SAR
100BASE-TX not not not
121 Others SIEMENS Siregraph DICOM A04 disable No No 0:0116H(W) Yes SI03
10BASE-T indicate indicate indicate
G17
- Dmax:300
Dmin:20

- SAR SSM esoft

100BASE-TX not not not


122 Others SIEMENS SYNGO DICOM A04 disabled No No 0:0116H(W) Yes - SI04
10BASE-T indicate indicate indicate G17
- Dmax:300 Sharp
Dmin:20

006-205-03
02.4.9 Page29/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR - ELEGRA

not not not G23


123 US SIEMENS ELEGRA 4.3.130 DICOM 10BASE-T A03 disabled No No 0:0116H(W) Yes -
indicate indicate indicate Dmax:300
- - fuji-printer
Dmin:020
Contrast:100

- SAR SSM VIRT1


not not not
124 WS SIEMENS 3D Virtuoso VA30C DICOM 100BASE-TX A03 disabled No No 0:0116H(W) Yes - SI06 G17
indicate indicate indicate
- Dmax:300 Sharp
Dmin:20

- SAR SSM leonardo1


Leonardo 100BASE-TX not not not
125 WS SIEMENS VA10 DICOM A04 disabled No No 0:0116H(W) Yes - SI03 G17
DR 10BASE-T indicate indicate indicate
- Dmax:300 Sharp
Dmin:20

- SAR SSM MV1000


Magic
View not not not
126 WS SIEMENS VB32A DICOM 100BASE-TX A04 disabled No No 0:0116H(W) Yes - G17
Helios indicate indicate indicate
1000 - Dmax:300 Sharp
Dmin:20

- SAR SSM RADIS


100BASE-TX not not not
127 WS SIEMENS Multix FD VA10 DICOM A04 disabled No No 0:0116H(W) Yes - SI03 G17
10BASE-T indicate indicate indicate
- Dmax:300 Sharp
Dmin:20

006-205-03
02.4.9 Page30/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR SSM RADIS


100BASE-TX not not not
128 WS SIEMENS Thorax FD VA10 DICOM A04 disabled No No 0:0116H(W) Yes - SI03 G17
10BASE-T indicate indicate indicate
- Dmax:300 Sharp
Dmin:20

- SAR - vision101

VISION POWER 100BASE-TX not not not G17


129 Others SMV AMERICA 5.0.2 DICOM A03 disabled No No 0:0116H(W) Yes -
STATION 10BASE-T indicate indicate indicate Dmax:300
- - fuji-printer
Dmin:20
Contrast:100

- SAR - ImageACCESS
ImageACCESS
StorCOMM not not not G17
130 WS (MedCAP, 3.4.9.1 DICOM 10BASE-T A03 disabled No No 0:0116H(W) Yes - ST01
INC. indicate indicate indicate Dmax:300
MedVIEW) - - fuji-printer
Dmin:20
Contrast:100

- BAR SSM

100BASE-2 not not not


131 DR Swissray Reunion DICOM A02 enable No No 0:0116H(W) Yes G01
10BASE-T indicate indicate indicate
- Dmax:100 Sharp
Contrast:100

- BAR - swissray

SWISSVISION
100BASE-TX not not not
132 WS SWISSRAY TR4000 6.2 DICOM A02 enabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate G01
WORKSTATION
- Dmax:100 - fuji-printer
Contrast:100

006-205-03
02.4.9 Page31/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

512x512 SAR SSM aquilion

G12
Dmax:3.00
Dmin:0.22
No. of
Point:5
No.1
Dp:1.70
Dshift:-0.16
C:1.00
No.2
133 CT TOSHIBA Aquilion V1.00 TOSHIBA 10BASE5 A00 - - - - - - - - 160 Dp:2.00
Dshift:-0.08
1byte C:1.00 MEDIUM printer1
No.3
Dp:2.40
Dshift:-0.08
C:1.00
No.4
Dp:0.50
Dshift:-0.03
C:1.00
No.5
Dp:2.80
Dshift:-0.04
C:1.00

006-205-03
02.4.9 Page32/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR SSM aquilion

G12
Dmax:3.00
Dmin:0.22
No. of
Point:5
No.1
Dp:1.70
Dshift:-0.16
C:1.00
No.2
not not Dp:2.00
134 CT TOSHIBA Aquilion V1.00 DICOM 10BASE5 A00 indicate disabled No No 0:0116H(W) Yes -
indicate indicate Dshift:-0.08
- C:1.00 MEDIUM printer1
No.3
Dp:2.40
Dshift:-0.08
C:1.00
No.4
Dp:0.50
Dshift:-0.03
C:1.00
No.5
Dp:2.80
Dshift:-0.04
C:1.00

006-205-03
02.4.9 Page33/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

512x512 SAR SSM aquilion

G12
Dmax:3.00
Dmin:0.22
No. of
Point:5
No.1
Dp:1.70
Dshift:-0.16
C:1.00
No.2
135 CT TOSHIBA Asteion VI TOSHIBA 10BASE5 A00 - - - - - - - - 160 Dp:2.00
Dshift:-0.08
1byte C:1.00 MEDIUM printer1
No.3
Dp:2.40
Dshift:-0.08
C:1.00
No.4
Dp:0.50
Dshift:-0.03
C:1.00
No.5
Dp:2.80
Dshift:-0.04
C:1.00

006-205-03
02.4.9 Page34/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR SSM aquilion

G12
Dmax:3.00
Dmin:0.22
No. of
Point:5
No.1
Dp:1.70
Dshift:-0.16
C:1.00
No.2
not not
136 CT TOSHIBA Asteion VI DICOM 10BASE5 A00 indicate disabled No No 0:0116H(W) Yes - Dp:2.00
indicate indicate
Dshift:-0.08
- C:1.00 MEDIUM printer1
No.3
Dp:2.40
Dshift:-0.08
C:1.00
No.4
Dp:0.50
Dshift:-0.03
C:1.00
No.5
Dp:2.80
Dshift:-0.04
C:1.00

006-205-03
02.4.9 Page35/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

512x512 SAR SSM aquilion

G12
Dmax:3.00
Dmin:0.22
No. of
Point:5
No.1
Dp:1.70
Dshift:-0.16
C:1.00
No.2
137 CT TOSHIBA Asteion VR TOSHIBA 10BASE5 A00 - - - - - - - - 160 Dp:2.00
Dshift:-0.08
1byte C:1.00 MEDIUM printer1
No.3
Dp:2.40
Dshift:-0.08
C:1.00
No.4
Dp:0.50
Dshift:-0.03
C:1.00
No.5
Dp:2.80
Dshift:-0.04
C:1.00

006-205-03
02.4.9 Page36/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR SSM aquilion

G12
Dmax:3.00
Dmin:0.22
No. of
Point:5
No.1
Dp:1.70
Dshift:-0.16
C:1.00
not not No.2
138 CT TOSHIBA Asteion VR DICOM 10BASE5 A00 indicate disabled No No 0:0116H(W) Yes - Dp:2.00
indicate indicate
Dshift:-0.08
- C:1.00 MEDIUM printer1
No.3
Dp:2.40
Dshift:-0.08
C:1.00
No.4
Dp:0.50
Dshift:-0.03
C:1.00
No.5
Dp:2.80
Dshift:-0.04
C:1.00

006-205-03
02.4.9 Page37/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- BAR -
139 CT TOSHIBA X-PRESS V5.74 DICOM 10BASE5 A00 indicate indicate indicate enabled No No 0:0116H(W) Yes -
- G16 -

- BAR -
140 CT TOSHIBA X-VIGOR V5.74 DICOM 10BASE5 A00 indicate indicate indicate enabled No No 0:0116H(W) Yes -
- G16 -

- BAR -
141 CT TOSHIBA X-VISON V5.74 DICOM 10BASE5 A00 indicate indicate indicate enabled No No 0:0116H(W) Yes -
- G16 -

- SAR SSM s081141


G17
142 DR TOSHIBA ADR1000A V2.8 DICOM 10BASET A03 indicate indicate indicate enabled No No 0:0116H(W) Yes -
Dmax:270
- MEDIUM FM-DP3543
Dmin:19
Contrast:100
- SAR SSM s081141
G17
143 DR TOSHIBA ADR2000A V7.0 DICOM 10BASET A03 indicate indicate indicate enabled No No 0:0116H(W) Yes -
Dmax:270
- MEDIUM FM-DP3543
Dmin:19
Contrast:100

006-205-03
02.4.9 Page38/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR SSM TM_CT_CMW

G12
Dmax:300
Dmin:22
No. of
Point:5
No.1
Dp:170
Dshift:-16
not No.2
144 MRI Toshiba Excelart V4.10*R27DICOM 10BASE-T /A02 disable No No 0:0116H(W) Yes -
indicate indicate indicate Dp:200
- Medium
Dshift:-8
No.3
Dp:240
Dshift:-8
No.4
Dp:50
Dshift:-3
No.5
Dp:280
Dshift:-4

512x512 BAR - monkey

FLEXART HYPER
145 MRI TOSHIBA V4.00 TOSHIBA 10BASE5 A00 - - - - - - - - 200
INDY Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

006-205-03
02.4.9 Page39/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- BAR - monkey

FLEXART HYPER not not not


146 MRI TOSHIBA V4.00 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
INDY Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

512x512 BAR - monkey

FLEXART HYPER
147 MRI TOSHIBA V3.51 TOSHIBA 10BASE5 A00 - - - - - - - - 200
V35M Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR - monkey

FLEXART HYPER not not not


148 MRI TOSHIBA V3.51 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
V35M Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

006-205-03
02.4.9 Page40/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

512x512 BAR - monkey

FLEXART
149 MRI TOSHIBA V4.00 TOSHIBA 10BASE5 A00 - - - - - - - - 200
INDY Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR - monkey

FLEXART not not not


150 MRI TOSHIBA V4.00 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
INDY Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

512x512 BAR - monkey

FLEXART
151 MRI TOSHIBA V3.51 TOSHIBA 10BASE5 A00 - - - - - - - - 200
V35M Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR - monkey

FLEXART not not not


152 MRI TOSHIBA V3.51 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
V35M Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

512x512 BAR -

MRT-200GP
153 MRI TOSHIBA V4.00 TOSHIBA 10BASE5 A00 - - - - - - - - 200
INDY Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

006-205-03
02.4.9 Page41/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- BAR -

MRT-200GP not not not


154 MRI TOSHIBA V4.00 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
INDY Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

512x512 BAR -

MRT-200GP
155 MRI TOSHIBA V3.51 TOSHIBA 10BASE5 A00 - - - - - - - - 200
V35M Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR -
MRT-200GP not not not
156 MRI TOSHIBA V3.51 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
V35M Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

512x512 BAR -

MRT-50GP
157 MRI TOSHIBA V4.00 TOSHIBA 10BASE5 A00 - - - - - - - - 200
INDY Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR -

MRT-50GP not not not


158 MRI TOSHIBA V4.00 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
INDY Type indicate indicate indicate
Bluebase:G12
- - Printer1
Clearbase:G11

006-205-03
02.4.9 Page42/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

512x512 BAR -
MRT-50GP
159 MRI TOSHIBA V3.51 TOSHIBA 10BASE5 A00 - - - - - - - - 200
V35M Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR -

MRT-50GP not not not


160 MRI TOSHIBA V3.51 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
V35M Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

006-205-03
02.4.9 Page43/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

640x512 SAR A-VR

G12
Dmax:300
Dmin:045
No. of
Point:4
Smooth
No.1
edge
Dp:1.80
detection
Dshift:-0.20
ON
C:0.90
100BASE-TX detection
161 MRI TOSHIBA OPART V2.5 TOSHIBA A00 - - - - - - - - 120 TO01 No.2
10BASE-T level
1byte Dp:2.00
600
Dshift:-0.13
sharpness
C:0.90
130
No.3
character
Dp:2.40
color
Dshift:-0.09
White
C:0.90
No.4
Dp:2.80
Dshift:-0.07
C:0.90

006-205-03
02.4.9 Page44/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR A-VR buzz

G12
Dmax:300
Dmin:045
No. of
Point:4
Smooth
No.1
edge
Dp:1.80
detection
Dshift:-0.20
ON
C:0.90
100BASE-TX not not not detection
162 MRI TOSHIBA OPART V2.5 DICOM A00 enabled No No 0:0116H(W) Yes - TO02 No.2
10BASE-T indicate indicate indicate level
- Dp:2.00 fuji-printer
600
Dshift:-0.13
sharpness
C:0.90
130
No.3
character
Dp:2.40
color
Dshift:-0.09
White
C:0.90
No.4
Dp:2.80
Dshift:-0.07
C:0.90

006-205-03
02.4.9 Page45/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

640x512 SAR A-VR


laserimager

G12
Dmax:300
Dmin:045
No. of
Point:4
Smooth
No.1
edge
Dp:1.80
detection
Dshift:-0.20
ON
C:0.90
100BASE-TX detection
163 MRI TOSHIBA OPART Opart 3.0 TOSHIBA A03 - - - - - - - - 120 TO03 No.2
10BASE-T level
1byte Dp:2.00 fuji-printer
600
Dshift:-0.13
sharpness
C:0.90
130
No.3
character
Dp:2.40
color
Dshift:-0.09
White
C:0.90
No.4
Dp:2.80
Dshift:-0.07
C:0.90

006-205-03
02.4.9 Page46/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

- SAR A-VR
laserimager

G12
Dmax:300
Dmin:045
No. of
Point:4
Smooth
No.1
edge
Dp:1.80
detection
Dshift:-0.20
ON
100BASE-TX not not not C:0.90
164 MRI TOSHIBA OPART Opert 3.0 DICOM A00 enabled No No 0:0116H(W) Yes - TO04 detection
10BASE-T indicate indicate indicate No.2
level
- Dp:2.00 fuji-printer
600
Dshift:-0.13
sharpness
C:0.90
130
No.3
character
Dp:2.40
color
Dshift:-0.09
White
C:0.90
No.4
Dp:2.80
Dshift:-0.07
C:0.90

006-205-03
02.4.9 Page47/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

512x512 BAR - monkey

VISART HYPER
165 MRI TOSHIBA V4.00 TOSHIBA 10BASET A00 - - - - - - - - 200
INDY Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR - monkey

VISART HYPER not not not


166 MRI TOSHIBA V4.00 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
INDY Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

512x512 BAR - monkey

VISART HYPER
167 MRI TOSHIBA V3.51 TOSHIBA 10BASE5 A00 - - - - - - - - 200
V35M Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR - monkey

VISART HYPER not not not


168 MRI TOSHIBA V3.51 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
V35M Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

006-205-03
02.4.9 Page48/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

512x512 BAR - monkey

VISART
169 MRI TOSHIBA V4.00 TOSHIBA 10BASE5 A00 - - - - - - - - 200
INDY Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR - monkey

VISART not not not


170 MRI TOSHIBA V4.00 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
INDY Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

512x512 BAR - monkey

VISART
171 MRI TOSHIBA V3.51 TOSHIBA 10BASE5 A00 - - - - - - - - 200
V35M Type Bluebase:G12
2bytes - Printer1
Clearbase:G11

- BAR - monkey

VISART not not not


172 MRI TOSHIBA V3.51 DICOM 10BASE5 A00 disabled No No 0:0116H(W) Yes -
V35M Type indicate indicate indicate Bluebase:G12
- - Printer1
Clearbase:G11

2176x2048 BAR -

173 NM TOSHIBA GCA-7100A/DI V4.60 TOSHIBA 10BASE-T A00 - - - - - - - - 200


Bluebase:G16
1byte -
Clearbase:G15

2176x2048 BAR -

174 NM TOSHIBA GCA-7100A/UI V4.60 TOSHIBA 10BASE-T A00 - - - - - - - - 200


Bluebase:G16
1byte -
Clearbase:G15

006-205-03
02.4.9 Page49/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

2176x2048 BAR -

175 NM TOSHIBA GCA-7200A/DI V4.60 TOSHIBA 10BASE-T A00 - - - - - - - - 200


Bluebase:G16
1byte -
Clearbase:G15

2176x2048 BAR -

176 NM TOSHIBA GCA-7200A/UI V4.60 TOSHIBA 10BASE-T A00 - - - - - - - - 200


Bluebase:G16
1byte -
Clearbase:G15

2176x2048 BAR -

177 NM TOSHIBA GCA-9300A/DI V4.60 TOSHIBA 10BASE-T A00 - - - - - - - - 200


Bluebase:G16
1byte -
Clearbase:G15

2176x2048 BAR -

178 NM TOSHIBA GCA-9300A/UI V4.60 TOSHIBA 10BASE-T A00 - - - - - - - - 200


Bluebase:G16
1byte -
Clearbase:G15

2176x2048 BAR -

179 NM TOSHIBA GMS5500A/DI V4.60 TOSHIBA 10BASE-T A00 - - - - - - - - 200


Bluebase:G16
1byte -
Clearbase:G15

006-205-03
02.4.9 Page50/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

2176x2048 BAR -

180 NM TOSHIBA GMS5500A/UI V4.60 TOSHIBA 10BASE-T A00 - - - - - - - - 200


Bluebase:G16
1byte -
Clearbase:G15

TM_NM_DCM_
BAR
ULTRA5
100BASE-TX not not not
181 RI Toshiba E-CAM V5.0 DICOM - /A02 enable No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate G16
Dmax:300

TM_NM_DCM_
BAR
ULTRA5
100BASE-TX not not not
182 RI Toshiba E-SOFT V5.0 DICOM - /A02 enable No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate
G16
Dmax:300

TM_NM_DCM_
BAR
ULTRA5
100BASE-TX not not not
183 RI Toshiba GCA-7100/UI,PI V5.0 DICOM - /A02 enable No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate
G16
Dmax:300

TM_NM_DCM_
BAR
ULTRA5
100BASE-TX not not not
184 RI Toshiba GCA-7200A/UI,PI V5.0 DICOM - /A02 enable No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate
G16
Dmax:300

006-205-03
02.4.9 Page51/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

TM_NM_DCM_
BAR
ULTRA5
100BASE-TX not not not
185 RI Toshiba GCA-9300A/UI,PI V5.0 DICOM - /A02 enable No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate
G16
Dmax:300

TM_NM_DCM_
BAR
ULTRA5
100BASE-TX not not not
186 RI Toshiba GMS-5500A/UI,PR V5.0 DICOM - /A02 enable No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate
G16
Dmax:300

640x512 BAR -

ALATOVIEW
187 WS TOSHIBA ALATOVIEW V1.00 TOSHIBA 10BASE5 A00 - - - - - - - - 200

1byte G16 -

Max.
Image
188 WS TOSHIBA TWS-400A V2.0 TOSHIBA 10BASE-T Size A00 - - - - - - - - 200 - -
is
10MB

006-205-03
02.4.9 Page52/53 FN-PS551-Connection_List2002_4.xls
FUJIFILM Modality Connection List For Fuji Network Print Server / Network Printer FN-PS551 / DRYPIX1000 / DRYPIX3000 / FM-DP L

Modality Information Required Parameters Recommended Parameters

9.Connected 13.Tested
6.Image TOSHIBA environment
7.Tested
5.Cable Matnix 8.Connected DICOM Protocol Protocol 11.Gamma table 12.Magnify Host Name
1.Modality 2.Host (Software Software of 10.Setup
No. 3.Model Name 4.Protocol Connected No. for SAR for SSM
Type Vendor Version) FN-PS551 ID No.
Type N-Event- Use Use Use or BAR or A-VR Printer
/DRYPIX
Bytes 0107H 0116H B604H Report extension default Change system Overlay AE Title
per pixel Warning Warning Warning RQ format annotation filmsize time out threshold

Max.
Image
V1.10 100BASE-TX
189 WS TOSHIBA TWS-2100 TOSHIBA Size A00 - - - - - - - - 200 - -
JR000 10BASE-T
is
30MB

SAR A-VR

Sharp
edge
detection
ON
Vidar Copy ExpressFilm 100BASE-TX not not not YES G17 detective
190 Others V1.0 DICOM - A05 disable No 0:0116H(W) Yes - VI01
Corporation Digitizer 10BASE-T indicate indicate indicate ID=CR Dmax:300 level
Dmin:20 600
sharpness
130
character
color
White

- SAR - VITREA

100BASE-TX not not not


191 WS VITAL IMAGES VITREA 1.2 1.2.5 DICOM A03 disabled No No 0:0116H(W) Yes -
10BASE-T indicate indicate indicate
G17
Dmax:300
- - fuji-printer
Dmin:018
Contrast:100

006-205-03
02.4.9 Page53/53 FN-PS551-Connection_List2002_4.xls
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.AC01

Configuration Parameters for “Acuson Corporation / WS3000


(Kinetics ),and so on”

Required to set the following parameters.

Software version must be 2.1 on the Acuson Kinetics to do Dicom print


successfully. If software version is 2.0 or below,
Acuson will provide a patch to connect to the FN-PS551.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.AG01

Configuration Parameters for “ Agfa/PaxPort ,and so on”

Required to set the following parameters.

PaxPort is Conversion box of Digital and Analogt PaxPort.

A- The following service utility configuration settings are required on the Agfa
Paxport:
1- Configuration Information (2010,0150) is supported by the Paxport and the
specified values can be entered as "1" to "8"
or "CS000" to "CS999" depending on LUT selection. The system MUST be re-
booted after making a change otherwise it will
use prior settings.
2- To set a specific modality for a desired LUT, go to the Paxport Configuration
Screen, select Destination Pool setup,
Highlight fuji-printer (AE Title) ,click on the View/Edit Icon, go to Dicom settings
and inside the Dicom Configuration Info box,
enter the the specified value.
3-The Paxport Print Management component ignores the
N_EVENT_REPORTS sent by the FN-PS551. As a result, it does
not care if the printer is off line, out of film, in service mode or down as long as
the print job made it successfully to the
FN-PS551.
4- For acceptable Image quality, access the "fuji-printer" user profile, go to
"User Taste Gray" and set the following:
Dmin =.2
Dmax= 3.0
Type = Linear
The PaxPort converts analog and digital devices to DICOM. The LUT gamma
selection on the FN-PS551 should be set
according to the type of device connected. i.e CT, MR, Ultrasound, etc..
B - The following settings must be done on the FN-PS551:
1- Go the Service Utility, click on Annotation and set Font Size to 10. If font
size is set to 14 which may be the default value,
Image Information will be cut off.
2- Image layout must be set to concentration.
All Image Display Formats (2010,0010) were tested including Portrait mixed
and Landcape Mixed formats.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.AG02

Configuration Parameters for “Agfa/ADC(Agfa Digital Center),and so


on”

Required to set the following parameters.

During installation , both Agfa and Fuji service engineers must be present.
Fuji imagers must have linear input – output characteristics with no image
interpolation, so Fuji imagers need no image quality adjustment.
Never change image quality parameters defined in this document.
In case either of Agfa or Fuji insall updated software without validation test ,
the company changing the software should be solely responsible for its
connectivity.

LUT:
SAR
Gamma table No.:17
Dmax:300
Dmin:0

Magnify:
Procedure: SSM
Smoothing type:MEDIUM

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.AL01

Configuration Parameters for “ALI Technologies Inc. / ALI NewPort


,and so on”

Required to set the following parameters.

The ALI NewPort is a Compaq Computer that acquires ultrasound images


from sources having a video signal output.
It does not report any error for film empty, printer off line, or maintenance
mode.
The NewPort Dicom conformance Statement indicates that it supports
Configuration Information but it did not work during the actual testing.

006-205-03
02 4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.CE01

Configuration Parameters for “ Cedara Software Corp. / Harmony MR


,and so on”

Required to set the following parameters.

Cedara supports only portrait formats and the print job is always sent as a 1
on 1. For best image quality print jobs should be sent on a “HIGH
RESOLUTION” MODE.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.CM01

Configuration Parameters for “ CMS Inc. / Focus,and so on”

Required to set the following parameters.

The Focus system does not support DICOM Configuration Information (2010,0150).
It does not send Maximum or Minimum density, but applying Window Width/ Level
must be done carefully in order to produce acceptable Image quality.
The CMS Focus system requires that all workstations on the network have the same
AE title. When printing from more than one Focus workstation, it is necessary to
configure the FN-PS551 Client default file rather than creating a client specific file.
This will allow all of the workstations to print through the "Default Client" and apply
the same LUT settings to all workstations on the network.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.ES01

Configuration Parameters for “Eastman Kodak Company : DR9000


,and so on”

Required to set the following parameters.

Trim sets to OFF.

Using Service Utility of FN-PS551,


In “Client” tab.
Select AE Title of DR9000,
Select Properties.
In “output format” tab.

Set trim=OFF

006-205-01
99.12.22
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.FU01

Configuration Parameters for “FUJIFILM : QA-WS771, CR Console ,


XG-1 Console and so on”

Required to set the following parameters.

Trim sets to OFF.

Using Service Utility of FN-PS551,


In “Client” tab.
Select AE Title of QA-WS771, CR Console , XG-1 Console
Select Properties.
In “output format” tab.

Set trim=OFF

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.GE01

Configuration Parameters for “GE Medical Systems / eNTEGRA


,GENIE,Cedara ISG Hardcopy server software , Genie ACQ,Milenium
,PET Advance and so on”

Required to set the following parameters.

When setting up a fuji printer select “Imation 8100” and restart the application.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.GE02

Configuration Parameters for “GE Medical Systems / Logiq 700,and


so on”

Required to set the following parameters.

The Logiq 700 uses a DICOM echo to determine the printer status.
The FN-PS551 responds normally to the echo request but the Logiq 700
displays "???" as the printer status. This is a GE issue and is being
investigated.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.GE03

Configuration Parameters for “GE Medical Systems / Revolution XR/d


(Condor ) Workstation ,and so on”

Required to set the following parameters.

The XR/d Workstation requires printable column and row values to be entered
into the configuration when setting up the printer. It is necessary to set up the
extended format in order to support true size images. The column and row
settings should be as follows. For the FM-DP L
14INX17IN - 3500 C X 4240 R
11INX14IN - 2540 C X 3600 R
8INX10IN - 1998 C X 2510 R
14INX14IN - 3520 C X 3490 R (Not tested)
The printer pixel resolution must also be entered. This value should be 100
microns.
Min and Max density are sent by the XR/d workstation and must be set
correctly on the workstation for optimum imagequality. The values used during
the test were. D-Min = 20, D-Max = 300.
The XR/d Workstation controls all aspects of image quality.
The FN-PS551 must be set to SAR 17 (Linear curve).After calibrating the
printer, the XR/d calibration tool must be used to calibrate the workstation with
the printer. The XR/d will send a 24 step test pattern, then the GE FSE must
measure the density of the 24 steps and enter the values into the workstation.
This should provide the optimum image quality.
Do not attempt to adjust the image quality using different gamma curves. If
the customer is not satisfied with the image quality, they MUST contact GE
Medical Systems.
Other required settings:
1) Print server Annotation : Margin between image = 0
Image layout = Concentration
2) Client output format: Trim width = 0

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.GE04

Configuration Parameters for “GE / Application Medical Imaging BV /


RADworks 5.0 Workstation,and so on”

Required to set the following parameters.

When configuring the RADworks WS , the “Magnification type” (2010,0060)


must be set to “NONE” ,and TRUE SIZE must be turned ON.

There are Picker RADworks , IBM RADworks, GE RADworks, Applicare


RADworks.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.GE05

Configuration Parameters for “GE / AdvantX Legacy DRS / Gateway


,and so on”

Required to set the following parameters.

GE AdvantX DRS can only print through the DRS DICOM Gateway.
Slide formats are not supported.
Transfer of a print job from the DRS to the Gateway is very slow and overall
throughput is affected. The overall system throughput is approximately 5
minutes per film . This is a GE issue and the customer should be made aware
prior to installation.
To change DMIN, DMAX, Smoothing Type, and Film Size ID, Highlight the
print job, click on Printer properties and make the necessary changes.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.GE06

Configuration Parameters for “GE / OEC 9800 Mobile C-arm ,and so


on”

Required to set the following parameters.

OEC 9800 supports portrait formats only.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.HI01

Configuration Parameters for “Hitach / Airis II,Altaire ,Statis ,and so


on”

Required to set the following parameters.

Images are sent to the FN-PS551 in page mode. 1 on 1 format only.

1-The Hitachi Airis II supports only 1:1 format. The user has the option to
select different lay-out formats but the print job is always sent as a 1 on 1.

2- The Airis II should be set to "HIGH RESOLUTION" mode. To activate this


function: Go to the main menu,
Click on System Console/Preferences/viewing/ select "DICOM" under Output
Imager and "High" under default quality.

3-Throughput is slower when printing in the "High resolution" mode but image
quality is improved.
The following settings are recommended on the FN-PS551:
Gamma 12
Use extension format set to "Yes" with ID = CR
Default Annotation may be set to "NO"
Set trim to "off" on Output Format.

4-The setting time out value for Airis II, Altaire ,Statis should be 600 seconds
or much longer.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.HI02

Configuration Parameters for “Hitach Medical Corporation / Clavis


View , DR2000X Clavis,and so on”

Required to set the following parameters.

The special formats of DR are used.


In 35x43 cm film size ,only <PORTRAIT> is supported.

26x36 cm :
<PORTRAIT> 1x1, 1x2, 2x2, 2x3, 3x3, 3x4, 4x5
<LANDSCAPE> 1x1, 1x2, 2x2, 2x3, 3x3, 3x4, 4x5, 2x1, 3x2

35x43 cm :
<PORTRAIT> 1x1, 1x2, 2x2, 2x3, 3x3, 3x4, 4x5, 2x1, 3x2, 4x3

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.PI01

Configuration Parameters for “PICKER : ULTRA Z,and so on”

Required to set the following parameters.

Select FN-PS551 as the camera type in the Picker camera device configuration.
After configuring the camera , the Picker Ultra Z must be re-booted.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.PI02

Configuration Parameters for “Picker / Marconi Medical Systems /


Outlook MRI,and so on”

Required to set the following parameters.

Set picker unit configuration “Hardcopy output Gamma Correction” = 1.3

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.SC01

Configuration Parameters for “ScImage Inc. / NETRA-MD ,and so


on”

Required to set the following parameters.

Because the NETRAMD is a multiple modality Workstation, a specific LUT


must be configured for each modality. When creating multiple LUT'S for
various modalities both systems must be configured to support LUT selection.

A- ScImage settings:
Multiple printer destinations can be created under the same AE title and any
value between "CS000 & CS999" can be entered on the NETRAMD
Workstation to specify a LUT. Go to "PRINTERSETTINGS" and type the
desired value under the "CONFIGURATION" field. As an example "CS301"
will go to LUT 3 of the FN-PS551.

B- FN-PS551 settings:
Go the FN-PS551 Service Utility/ Clients, select the host name (ScImage) and
properties - From the menu, Click on LUT and under Adjustment Parameter
LUT, Setup each LUT to match the value of the NETRAMD Configuration field
for each modality with the appropriate Gamma table, Max Density, and
Minimum Density.

The following Gamma curves were used during our test:


CR: Gamma 17
CT: Gamma 11
US: Gamma 23
NM: Gamma 14
MRI: Gamma 12

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.TO01

Configuration Parameters for “TOSHIBA : OPART (Toshiba protocol )


,and so on”

Required to set the following parameters.

Opart software version 2.5 will not have a configuration setting for the FN-PS551.
To configure the Opart , the Toshiba FSE should select MF-300T for ACR-NEMA
printing.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.TO02

Configuration Parameters for “TOSHIBA : OPART (DICOM protocol )


,and so on”

Required to set the following parameters.

Opart software version 2.5 will not have a configuration setting for the FN-PS551.
To configure the Opart , the Toshiba FSE should select MF-PS667 for DICOM
printing.

11INx14IN film size is not supported in this version. If 11INx14IN is required you
must use the ACR-NEMA (Toshiba) protocol.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.TO03

Configuration Parameters for “TOSHIBA : OPART (Toshiba protocol )


,and so on”

Required to set the following parameters.

1)Configuration Information does not work . When host modality specifies a LUT ,
FN-PS551 ignores the request and prints to the default on the configuration
menu.

2) When configuration the Opart for ACR-NEMA protocol , the “Camera type”
must be set as “Fuji_PS551”.
If the error “Printer name not recognized” occurs , have Toshiba engineer check
the “hostedit” file on the Opart . The “hostedit” file must match the “Network
camera name and IP address”.

3) FN-PS551 only requires the IP address of the Opart function, do not change
any other information in the FN-PS551 configuration file or in the Windows NT
network settings other than the IP address and subnet.

006-205-03
02.4.9
FN-PS551/DRYPIX1000/DRYPIX3000/FM-DPL Setup ID No.TO04

Configuration Parameters for “TOSHIBA : OPART (DICOM protocol )


,and so on”

Required to set the following parameters.

1) LUT values must be entered as “1 to 8”.

2) When configuring the Opart for DICOM print, the “Camera type” must be set
as “Fuji_DICOM”.

3) On the Toshiba Opart modality currently referred to as the MRT-600 , the LUT
values must be entered as “1 to 8”.
It will not work as specified in the FN-PS551 DICOM conformance statement.

006-205-03
02.4.9

You might also like