Museums & Libraries Archival Storage
Museums & Libraries Archival Storage
Museums & Libraries Archival Storage
Museums, Libraries
& Archival Storage
Mold on books
Authorities often do not agree fully on the ideal temperature and relative
humidity for library and archival materials but are in general agreement. A
frequent recommendation is a stable temperature no higher than 70°F and a
stable relative humidity between a minimum of 30% and a maximum of 50%
(i.e., approximately 33-55 gr/#, or 37-71°Fdp). Research indicates that relative
humidity conditions at the lower end of this range are preferable since dete-
rioration then progresses at a slower rate.
Relative
Type of Collection Temperature gr/# Fdp
Humidity %
Archives and Libraries Storing
-4 40 2 -20
Chemically Unstable Conditions
Microfilm, Silver-Gelatin 65 30 27 33
Polyester Film, B&W 70 40 44 45
Polyester Film, Color 27 30 6 3
Magnetic Media on Polyester Base 46 30 14 18
Acetate Film, Color 27 30 6 3
Acetate Film, B&W 41 30 11 14
Nitrate Film 27 30 6 3
Gramophone Discs 65 35 32 37
Paper 60 45 35 39
Textiles 70 50 55 51
Photographic Plates 48 35 17 23
Photographic Paper Prints, B&W 48 40 20 26
Photographic Paper Prints, Color 38 35 12 15
Stable Room
Metals Temp
<30 <33 <37
Paintings 70 45 49 48
Leather/Parchment/Vellum 55 45 29 34
Wood 65 50 46 46
- These conditions are general recommendations. Contact the factory or your sales representative for
project specific consultation.
- Storage condition stability is equally important as the storage condition itself.