Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 91 views

    Ref: NE1-IV-SEGC-HSE-ALERT-06.2020-046: 700Mw CSP + 250Mw PV Hybrid Ipp - Dewa Phase Iv

    Uploaded by

    shameer
    Workers were observed not following fall protection requirements during a scaffolding dismantling activity at a 700MW CSP + 250MW PV hybrid power plant project. An investigation found poor planning, inadequate training, and incompetent supervision contributed to the unsafe work. Lessons learned include the need to properly identify hazards, communicate risks, enforce safety procedures, provide pre-work training, and ensure close HSE and management supervision especially for high-risk activities to prevent accidents from unsafe acts or conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ref: NE1-IV-SEGC-HSE-ALERT-06.2020-046: 700Mw CSP + 250Mw PV Hybrid Ipp - Dewa Phase Iv

    Uploaded by

    shameer
    91 views1 page
    Workers were observed not following fall protection requirements during a scaffolding dismantling activity at a 700MW CSP + 250MW PV hybrid power plant project. An investigation found poor planning, inadequate training, and incompetent supervision contributed to the unsafe work. Lessons learned include the need to properly identify hazards, communicate risks, enforce safety procedures, provide pre-work training, and ensure close HSE and management supervision especially for high-risk activities to prevent accidents from unsafe acts or conditions.

    Original Description:

    HSE alert

    Original Title

    HSE Alert

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Workers were observed not following fall protection requirements during a scaffolding dismantling activity at a 700MW CSP + 250MW PV hybrid power plant project. An investigation found poor planning, inadequate training, and incompetent supervision contributed to the unsafe work. Lessons learned include the need to properly identify hazards, communicate risks, enforce safety procedures, provide pre-work training, and ensure close HSE and management supervision especially for high-risk activities to prevent accidents from unsafe acts or conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    91 views1 page

    Ref: NE1-IV-SEGC-HSE-ALERT-06.2020-046: 700Mw CSP + 250Mw PV Hybrid Ipp - Dewa Phase Iv

    Uploaded by

    shameer
    Workers were observed not following fall protection requirements during a scaffolding dismantling activity at a 700MW CSP + 250MW PV hybrid power plant project. An investigation found poor planning, inadequate training, and incompetent supervision contributed to the unsafe work. Lessons learned include the need to properly identify hazards, communicate risks, enforce safety procedures, provide pre-work training, and ensure close HSE and management supervision especially for high-risk activities to prevent accidents from unsafe acts or conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    HSE ALERT AND LESSON LEARNT: Unsafe Working at Height

    Ref: NE1-IV-SEGC-HSE-ALERT-06.2020-046
    700MW CSP + 250MW PV HYBRID IPP - DEWA PHASE IV

     DESCRIPTION:  KEY FINDINGS:


    Client: NE1 • Poor planning of work.
    Principal Contractor: SEGC
    • In-adequate specific training.
    During the scaffolding dismantling activity, workers
    observed not complying with implementation of fall • In-competent supervision.
    protection required 100 % tie-off.

     LESSON LEARNED AND KEY MESSAGES:


    • Identification of all possible hazards and risk evaluation
    for all activities and ensure safety measures in place.
    • Clear communication of risk evaluation and hazards.
    • Enforce HSE rules and procedures strictly to avoid grave
    accidents resulting due to ignorance.
    • Pre-work training and effective toolbox talk prior to start
    an activity should be delivered and make sure awareness
    and safety measures are clearly understood by workers.
    • Empowered and adequate HSE, management
    supervision, especially for high risk activities.
    • Continuous and close monitoring by HSE & management
    personnel to immediately stop any unsafe acts or
    conditions till safety measures are in place and followed.
    • Zero tolerance for unsafe acts and unsafe conditions
    whilst carrying out any activity.
    Issued by: SEGC HSE Department Issued Date: 23 June 2020

    You might also like