Technical Specification

EJC 65 L0665-1 1/8

General Arrangement







 
 
  
  
   

 






5
5 
 
 ƒ



1RWH$OOGLPHQVLRQVLQPLOOLPHWHUV'LPHQVLRQVLQEUDFNHWVDUHLQLQFKHV
$OOYHUWLFDOGLPHQVLRQVUHSUHVHQWDQHPSW\XQLW
6WDQGDUG6$(5236)236FDQQRS\VKRZQ
P
© 2006 Sandvik Mining and Construction Canada Inc.
Sandvik Mining and Construction reserves the right to

IW
change this specification without notice

Sandvik Mining and Construction Canada Inc. Revision Date: 2006-2-08

4445 Fairview Street, Burlington Ontario, Canada L7L 2A4
Tel.: (905) 632-4940 Web: http://www.sandvik.com
 Technical Specification
EJC 65 L0665-1 2/8

Standard Unit Specifications

General Information Power Train

Main Dimensions Engine

Total length 5486 mm 216 in Diesel engine Deutz F5L-912W
Width over tires 1372 mm 54 in Output 51 kW (68 Hp) @ 2300 rpm
Maximum width 1448 mm 57 in Torque 229 Nm (169 lbf-ft) @ 1550 rpm
Height with canopy 2134 mm 84 in Number of cylinders In line, 5
Displacement 4.7 l (287 in³)
Operating Weights
Cooling system Air cooled
Total operating weight 6759 kg 14900 lb. Combustion principle Swirl chamber, four stroke
front axle 2327 kg 5130 lb. Air filtration Donaldson, dry type
rear axle 4432 kg 9770 lb. Electric system 24 V
Loaded Weights Fuel tank capacity 68 l 18 US gal.

Total loaded weight 9706 kg 21400 lb. Transfer Case

front axle 6813 kg 15021 lb. Dana SOH Gear drive 2.39:1
rear axle 2893 kg 6379 lb.
Transmission
Capacities
Rexroth AA4V56 Hydrostatic transmission with
Tramming capacity 2948 kg 6500 lb. forward and reverse
Break out force, lift 37 kN 3791 kg 8340 lbf
Break out force, tilt 46 kN 4750 kg 10450 lbf
Axles
Tipping load 6468 kg 14230 lb. Front axle Dana SOH 12D0840,
Standard bucket 1.2 m³ 1.5 yd³ conventional differential, fixed.
Rear axle Dana SOH 12D0840, no-spin
Bucket Motion Times differential, fixed.
Raising time 6.5 sec. Centre articulation/ 16 °
Lowering time 4.3 sec. oscillation
Dumping time 3.0 sec. Tires
Driving Speeds Forward and Reverse Tire size 9.00 X 20, 18 PLY
(Loaded) Air pressure, front 517 kPa 5.17 bar 75 psi
0 to 15.5 km/h (9.6 m.p.h.) Air pressure, rear 517 kPa 5.17 bar 75 psi

Frame
Frames Welded steel box construction
Systems
Material G40.21 - 50WT-CAT#3
Central hinge Welded steel box construction Steering Hydraulics
with hardened steel spherical Closed centre system with a single fixed displacement
bearings gear pump. One double acting steer cylinder equipped
Material G40.21 - 50WT-CAT#3 with electro./mechanical control lever.
Lift arms Solid plate construction
Material G40.21 - 50WT-CAT#3
Tanks Welded to frame.
© 2006 Sandvik Mining and Construction Canada Inc.
Sandvik Mining and Construction reserves the right to
change this specification without notice

Sandvik Mining and Construction Canada Inc. Revision Date: 2006-2-08

4445 Fairview Street, Burlington Ontario, Canada L7L 2A4
Tel.: (905) 632-4940 Web: http://www.sandvik.com
 Technical Specification
EJC 65 L0665-1 3/8

Turning Radius Other Standard Equipment

Inner 1905 mm 75 in • SAE ROPS/FOPS canopy
Outer 3734 mm 147 in • Electric gauges
Turning angle 40 ° • Audible back-up alarm
• Central manual lubrication system
Main Components • SAE JIC hose fittings
Hydraulic pump Gear
Manuals
Control valve Electro. / mechanical
All manuals are delivered on CD-ROM in web based
Steering cylinders EJC 3.5" bore x 1.75" rod format with Adobe PDF output for printing.
(89 mm x 44 mm)

Pressure Settings Distribution

Manual Type Customer Market Area
Main relief 15.2 MPa 152 bar 2200 psi
Spare parts manuals 3 Copies 1 Copy
Port relief valves 17.2 MPa 172 bar 2500 psi
Operator’s manual 3 Copies 1 Copy
Bucket Hydraulics Service manual 3 Copies 1 Copy
Full hydraulic open-centre system with one gear pump.
Equipped with electro./mechanical control lever, two lift
cylinders and one dump cylinder. Optional Equipment
Main Components Specifications
Lift cylinders EJC 4.0" bore x 2.0" rod (102
mm x 51 mm) Available Alternative Equipment
Dump Cylinder EJC 6.5" bore x 3.5" rod (165 Exhaust system Fume diluter with purifier
mm x 89 mm)
Hydraulic pump Gear pump Alternative Bucket Options
Control valve Electro. / mechanical Rock Volume Width
Buckets 1.0 m³ 1.25 yd³ 1345 mm 53 in
Pressure Settings
1.3 m³ 1.75 yd³ 1422 mm 56 in
Main relief 15.2 MPa 152 bar 2200 psi 1.5 m³ 1.9 yd³ 1473 mm 58 in
Bucket dump 5.5 MPa 55 bar 800 psi Ejector Volume Width
Bucket roll back 17.2 MPa 172 bar 2500 psi Buckets 1.0 m³ 1.25 yd³ 1422 mm 56 in
Raise/lower arms 17.2 MPa 172 bar 2500 psi
Hyd. oil tank cap. 114 l 28 US gal. Available Add-On Options
Quick disconnect system (QDS) - master hitch
Standard Brakes QDS bucket 1.1 m³ 1.5 yd³
Dynamic service braking through the hydrostatic QDS pallet forks
transmission. The parking brake is a spring applied,
hydraulically released dry disc brake mounted on the front Altitude compensation kit for Deutz F5L-912W engine
axle pinion. MSHA FOPS canopy
Fire suppression Manual - Ansul 4 nozzle
Main Components systems Auto. - Ansul 4 nozzle (Checkfire II)
Pressure accumulator Piston type with charge valve Hand held fire extinguisher - 10 lb.
Tamrock proportional RRC receiver cover/cable and
Electrical Equipment interface
Alternator 24 V 35 A min. RRC interface only (specify receiver)
Batteries 2 x 12 V, 950 CCA RRC fire suppression actuation for Tamrock RRC
Starter 24 V Heavy Duty
Driving and working lights 2 front, 2 rear
© 2006 Sandvik Mining and Construction Canada Inc.
Sandvik Mining and Construction reserves the right to
change this specification without notice

Sandvik Mining and Construction Canada Inc. Revision Date: 2006-2-08

4445 Fairview Street, Burlington Ontario, Canada L7L 2A4
Tel.: (905) 632-4940 Web: http://www.sandvik.com
 Additional Information
EJC 65 L0665-1 4/8

Tractive Effort Curve (Metric Units)

Rolling Resistance %
50
EJC 65
ENGINE: DEUTZ F5L-912FW AXLES: 12D0840
TRANS: Rexroth AA4V56 TIRES: 9.00 X 20, 18 PLY XMD2 EMPTY LOADED
45 Hydrostatic Payload: 2 832 kg 0 2 4 6 8 0 2 4 6 8

40

GRADE %
35
Tractive Effort (kN)

30

30%

25
25%

20
30% 20%

25%
15
15%
20%

10
15% 10%

10%
5
5%
5%

© 2006 Sandvik Mining and Construction Canada Inc.

Sandvik Mining and Construction reserves the right to
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Speed (km/h)

change this specification without notice

Sandvik Mining and Construction Canada Inc. Revision Date: 2006-2-08
4445 Fairview Street, Burlington Ontario, Canada L7L 2A4
Tel.: (905) 632-4940 Web: http://www.sandvik.com
 Additional Information
EJC 65 L0665-1 5/8

Tractive Effort Curve (US Units)

12
Rolling Resistance %
EJC 65
ENGINE: DEUTZ F5L-912FW AXLES: 12D0840
11 EMPTY LOADED
TRANS: Rexroth AA4V56 TIRES: 9.00 X 20, 18 PLY XMD2
0 2 4 6 8 0 2 4 6 8
Hydrostatic PAYLOAD: 6 500 lbs
10

GRADE
Tractive Effort (klbf)

30%
6

25%
5

30% 20%
4
25%
15%
3
20%

15%
10%
2

10%

1 5%
5%

© 2006 Sandvik Mining and Construction Canada Inc.

Sandvik Mining and Construction reserves the right to
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

change this specification without notice

Speed (mph)

Sandvik Mining and Construction Canada Inc. Revision Date: 2006-2-08

4445 Fairview Street, Burlington Ontario, Canada L7L 2A4
Tel.: (905) 632-4940 Web: http://www.sandvik.com
 Additional Information
EJC 65 L0665-1 6/8

Productivity Curve (Metric Units)

EJC 65 PRODUCTIVITY CURVE

250
Basic data for calculations:
225 Payload 2948 KG
Overall Speed limit 10 km/h
Fixed Cycle time 0.5 min
200
Fixed cycle time includes the time for filling, dumping, turning and accelerating

175 Slope/Grade (%) Hor./0 1:10/10 1:7/15 1:5/20

Loaded speed (km/h) 10 9.7 7.2 5.7
10 10 10 10
TONNES PER HOUR

Empty speed (km/h)

150

125

100

75

50

25

0
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425
ONE WAY DISTANCE IN METRES

0% 10% 15% 20%

© 2006 Sandvik Mining and Construction Canada Inc.

Sandvik Mining and Construction reserves the right to
change this specification without notice
Sandvik Mining and Construction Canada Inc. Revision Date: 2006-2-08
4445 Fairview Street, Burlington Ontario, Canada L7L 2A4
Tel.: (905) 632-4940 Web: http://www.sandvik.com
 Additional Information
EJC 65 L0665-1 7/8

Productivity Curve (US Units)

Basic data for calculations:

Payload 6500 lb
Overall Speed limit 6.2 mph
300 Fixed Cycle time 0.5 min
280
Fixed cycle time includes the time for filling, dumping, turning and accelerating
260
Slope/Grade (%) Hor./0 1:10/10 1:7/15 1:5/20
240 Loaded speed (mph) 6.2 6.0 4.5 3.5
Empty speed (mph) 6.2 6.2 6.2 6.2
220

200
TONS PER HOUR

180

160

140

120

100

80

60

40

20

0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400
ONE WAY DISTANCE IN FEET

© 2006 Sandvik Mining and Construction Canada Inc.

Sandvik Mining and Construction reserves the right to
change this specification without notice
Sandvik Mining and Construction Canada Inc. Revision Date: 2006-2-08
4445 Fairview Street, Burlington Ontario, Canada L7L 2A4
Tel.: (905) 632-4940 Web: http://www.sandvik.com
 We make it possible

Sandvik Mining and Construction Canada Inc. 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940

Web: http://www.sandvik.com