Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    Bend

    Uploaded by

    Jimmy My
    The document describes a BEND program that designs multi-gored bends between ducts of different cross-sectional shapes, including rectangular, circular, and obround shapes. The program takes input data on the inlet/outlet dimensions, bend angle, radius, gore design, and seam locations to generate patterns, drawings, NC programs, and cost estimates for the bend. It uses triangulation or radial line development methods to design bends with 2 to 10 gores and angles from 1 to 180 degrees.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bend

    Uploaded by

    Jimmy My
    43 views2 pages
    The document describes a BEND program that designs multi-gored bends between ducts of different cross-sectional shapes, including rectangular, circular, and obround shapes. The program takes input data on the inlet/outlet dimensions, bend angle, radius, gore design, and seam locations to generate patterns, drawings, NC programs, and cost estimates for the bend. It uses triangulation or radial line development methods to design bends with 2 to 10 gores and angles from 1 to 180 degrees.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a BEND program that designs multi-gored bends between ducts of different cross-sectional shapes, including rectangular, circular, and obround shapes. The program takes input data on the inlet/outlet dimensions, bend angle, radius, gore design, and seam locations to generate patterns, drawings, NC programs, and cost estimates for the bend. It uses triangulation or radial line development methods to design bends with 2 to 10 gores and angles from 1 to 180 degrees.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    43 views2 pages

    Bend

    Uploaded by

    Jimmy My
    The document describes a BEND program that designs multi-gored bends between ducts of different cross-sectional shapes, including rectangular, circular, and obround shapes. The program takes input data on the inlet/outlet dimensions, bend angle, radius, gore design, and seam locations to generate patterns, drawings, NC programs, and cost estimates for the bend. It uses triangulation or radial line development methods to design bends with 2 to 10 gores and angles from 1 to 180 degrees.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Ref: 9900-1-M3FS11


    FastSHAPES - BENDá 32Bit
    TYPICAL APPLICATIONS
    Bulk Materials Handling - chutes
    Mine Ventilation/Access
    Fluids Conveying - transitions and transformers.
    `Industrial strength’ structures, thick plate.

    TECHNICAL DESCRIPTION
    BEND provides a multi-gored bend between two ducts.
    Ducts may have different shaped cross-sections.
    Shapes are `rectircles’, i.e. round cornered rectangles.
    Rectircle describes rectangular, circular, & obround shapes.
    From 2 to 10 gores permitted.
    Bend angle from 1 degree to 180 degrees.
    Collars optional, integral when possible (prismatic bend)
    Gores Standard (Half Angle Ends) & Eschenburg (Equal Angle
    Gores) Setouts
    Bend radius on inside, outside or centreline of bend.
    Up to 8 longitudinal seams per gore.
    Uses Triangulation development method as standard.
    Also `AutoNest’ & radial line development when possible.

    DATA REQUIREMENTS
    Inlet and Outlet shape dimensions
    Material, Plate thickness
    Bend Angle
    Bend Radius and location (inside/outside/centreline)
    Number of Gores
    Gore Sizing - Automatic/Equal Angle/Half Angle Ends
    Collar lengths (optional)
    Longitudinal Seam Locations
    Green, and seam offset dimensions.
    `AutoNest’ seam location data (optional)

    Continued….

    FastSHAPES - BEND
    OUTPUT
    Patterns in any of the following forms ...
    FastCAM file
    2D DXF file, 3D DXF File
    NC Program
    Coordinate Table
    Costing Data, including Mass & Length of Cut

    PROGRAM REFERENCE
    M3FS11 : BEND

    OTHER REFERENCES
    M3FS7 : RECTIRCLE (Rectircular transitions and transformers)
    M3FS12 : ELBOW (Reducing circular cross-section bends)
    M3FS13 : LOBSTER (Reducing circular cross-section bends)
    M3FS21 : PENSTOCK (General right-circular-conical bends)

    COMMON NAME
    SQUARE TO ROUND BEND

    You might also like