Technical Data

2 Pole Models
3LS 2900 RPM

Stainless Steel
End Suction Pumps
(DIN 24255)

Stub Shaft Design

316 Stainless Steel

EBARA PUMPS AUSTRALIA PTY. LTD. 3LS_Techdata_SS_V09

CENTRIFUGAL PUMPS 3LS
SPECIFICATIONS - FEATURES & APPLICATIONS
V09

Note: 65-250 & 80mm models have precision cast 316 s/s casings.

These series of stainless steel pumps feature a unique one piece

volute casing that are produced using an advanced computer controlled
plasma stamping system that ensures total quality control during
manufacture (up to 65-200/22). With the smooth surfaces of stamped stainless steel,
this results in consistent high standard products, of superior quality and high efficiency.

Feat u res Ap p l icat ions

• Stainless steel liquid end components • Plant services
- High quality; corrosion resistance. • Water supply systems
- Manufactured in Stamped 316L and Cast 316 in larger models.
• Washing plants
• High quality mechanical shaft seals and o-rings
• Cooling water
- Fitted standard with SiC/SiC/Viton mechanical seal.
• Ultrapure water systems
• Standard IEC motors used • Air conditioning
- Allowing for single phase, special enclosure, • Sprinkler/flow irrigation
or specific brand motors to be fitted.
• OEM equipment application
• Close coupled design
- Saves space; simplifies maintenance and installation. • Pressure boosting
• Liquid transfer
• Back pullout construction
- Assembly and overhaul of the impeller and seal • Heat exchanger
without disturbing suction and discharge connections. • Spray systems
• High operating efficiency • Heating
- Lowers operating costs. • Beverage processing
• Top centerline discharge and foot support under casing • Pharmaceutical services
- Ensures self-venting and reduces misalignment • Water reclamation and treatment
from pipe loads.

• Available in "Kit" form

- "Kit" consists of complete pump wet end,
cast iron motor bracket, stub shaft,
motor support and all fasteners.

100

EPA
CENTRIFUGAL PUMPS 3LS
SPECIFICATIONS - TY PICAL CROSS SECTIONAL V IEW
V09

ing )
c as60/200
d 1
m pe -125/
a
st & 65
ith m
a l w & 50m
c
pi , 4 0
Ty all 32
.
(i.e

s ing
ca
st 80)
ca ll
w ith 50, & a
l -2
p ica.e. 65
Ty (i

101

EPA
CENTRIFUGAL PUMPS 3LS
PUMP SPECIFICATIONS 2 POLE 50 Hz
V09
Liquid Type of Liquid Clean water & moderately aggressive fluids
Handled Liquid Temperature Minimum -10ºC to Maximum 110ºC
Maximum Working Pressure 1 MPa
Closed centrifugal type (welded)
32,40,50 mm models
Construction Impeller [Reinforced laser welding for 40-200/11.0 & 50-200/15]
65,80 mm models Closed 3 dimensional centrifugal Type (cast)
Bearings Sealed Ball Bearing
32-125/160/200 32 mm x 50 mm
Discharge 40-125/160/200 40 mm 65 mm
Pipe x All flanged to
X
Connections Suction 50-125/160/200 50 mm x 65 mm DIN 2532 standard
65-125/160/200/250 65 mm x 80 mm
80-160/200/250 80 mm x 100 mm
All 32, 40 & 50
AISI 316 L Stainless Steel (stamped) [EN 1.4404]
65-125/160/200
Casing
65-250
AISI 316 Stainless Steel (precision cast) [EN 1.4401]
All 80
All 32, 40 & 50 AISI 316 L Stainless Steel (stamped) [EN 1.4404]
Impeller
All 65 & 80 AISI 316 Stainless Steel (precision cast) [EN 1.4401]
All 32, 40 & 50
65-125/160/200 AISI 316 L Stainless Steel (stamped) [EN 1.4404]
Casing
80-160
Cover
65-250
AISI 316 Stainless Steel (precision cast) [EN 1.4401]
80-200/250
Materials O-ring (casing) FPM [Viton]
All 32, 40 & 50 1.1~15 kW
22mmØ
Mechanical 65 up to 11 kW 4.0~11 kW
SiC/SiC/FPM [Viton]
Seal 65 -160/200/250 15~37 kW with anti rotation device
(& Shaft diameter) 30mmØ
80-160/200 11~37 kW for stationary seat.
80-250 45~55 kW 35mmØ
All 32, 40, 50 & 1.1~11 kW
Up to 22 kW
19mmØ
65 up to 11 kW 4.0~11 kW AISI 316 Stainless Steel
Stub [EN 1.4404]
50-200/15 15 kW 22mmØ
Shaft
(& diameter 65 -160/200/250 15~37 kW 30 to 55 kW
at impeller) 24mmØ Duplex Stainless Steel
80-160/200 11~37 kW
[EN 1.4462]
80-250 45~55 kW 29 mmØ
Bracket Cast Iron [& Aluminum depending on motor used]

CASING IMPELLER CASING COVER

Stamped Precision Cast Stamped Percision Cast Stamped Precision Cast

Stainless Steel (316L) Stainless Steel (316) Stainless Steel (316L) Stainless Steel Stainless Steel (316L) Stainless Steel (316)
All 32, 40 & 50 65-250, All 80 All 32,40 & 50 All 65 & 80 All 32, 40 & 50 65-250, 80-200/250
65-125/160/200 65-125/160/200, 80-160

102

EPA
CENTRIFUGAL PUMPS 3LS
MOTOR SPECIFICATIONS 2 POLE 50 Hz
V09

Version 3LS
Electric-TEFC
Type
Three phase
No.of Poles 2
-1
Rotation speed [min ] ~2900
Insulation class Class F (class B for temperature rise)
Protection degree IP 55
[kW] 1.1 ÷ 55
Power rating
[HP] 1.5 ÷ 75
Frequency [HZ] 50
220÷240 / 380÷415 ±5% (up to 3.0 kW)
Voltage [V] 380÷415 / 660÷690 ±5% (4.0 kW and above)
Casing material Cast iron
IM B5
(up to 2.2 kW)
Flange mount (IEC motor)
IM B35
(3.0 kw and above)

Note : Specifications refer to Standard motors.

WEG motors are generally used, but
other brands and types are available.

to r.
n mo
t iro
cas
G
WE
of
ew
l vi
na
c tio
s se
Cros
al
pic
Ty

1 03

EPA
CENTRIFUGAL PUMPS 3LS
PERFORMANCE CURVE 2 POLE 50 Hz
V09

40-125/1.5 (1.5kW) – impeller diameter = 125 mm

40-125/2.2 (2.2kW) – impeller diameter = 140 mm

Rotation speed ≈2900 min-1

Test standard : ISO 9906 Annex A

203

EPA
CENTRIFUGAL PUMPS 3LS
DIMENSIONS 3LS 32, 40, 50 (Fig 1) 2 POLE 50 Hz
V09

Discharge Flange
Note : Weight and some Motor
dimensions may vary
depending on motor fitted

Dimensions [mm]
Weight
Model Ø Ø Ø Ø Ø Ø Ø Ø
S2 Fig. H H1 H2 H3 R M N1 N2 A B C V1 V2 [ kgf ]
DN1 P1 K1 D1 DN2 P2 K2 D2

32-125/1.1 50 95 125 165 32 75 100 140 14 1 252 112 140 129 80 114 140 190 213 430 174 M25x1.5 M20x1.5 23.1
32-160/1.5 50 95 125 165 32 75 100 140 14 1 292 132 160 138 80 118 190 240 254 477 186 M25x1.5 M20x1.5 28.5
32-160/2.2 50 95 125 165 32 75 100 140 14 1 292 132 160 138 80 118 190 240 254 477 186 M25x1.5 M20x1.5 32.4
40-125/1.5 65 115 145 185 40 80 110 150 14 1 252 112 140 138 80 114 160 210 213 477 186 M25x1.5 M20x1.5 26.5
40-125/2.2 65 115 145 185 40 80 110 150 14 1 252 112 140 138 80 114 160 210 213 477 186 M25x1.5 M20x1.5 29.6
50-125/2.2 65 115 145 185 50 95 125 165 16 2 292 132 160 138 100 114 190 240 254 497 186 M25x1.5 M20x1.5 32.9

401

EPA