Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 562 views

    Progen: Pipe Thickness Calculation As Per IBR 350 Eqn.

    Uploaded by

    P s Jagatheesan
    The document contains calculations to determine the minimum required thickness of pipes and tubes based on design pressure and temperature. For pipe thickness, calculations are shown using Equation 91 from IBR 350 to determine minimum thicknesses of 4.54 mm and 6.45 mm for two pipe configurations. The provided thickness of 9.74 mm exceeds these minimums. For tube thickness, calculations use IBR 338(a) Equation 87 and determine a minimum thickness of 2.75 mm, which is less than the provided thickness of 3.24 mm. Both pipe and tube thicknesses are found to be satisfactory.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Progen: Pipe Thickness Calculation As Per IBR 350 Eqn.

    Uploaded by

    P s Jagatheesan
    562 views4 pages
    The document contains calculations to determine the minimum required thickness of pipes and tubes based on design pressure and temperature. For pipe thickness, calculations are shown using Equation 91 from IBR 350 to determine minimum thicknesses of 4.54 mm and 6.45 mm for two pipe configurations. The provided thickness of 9.74 mm exceeds these minimums. For tube thickness, calculations use IBR 338(a) Equation 87 and determine a minimum thickness of 2.75 mm, which is less than the provided thickness of 3.24 mm. Both pipe and tube thicknesses are found to be satisfactory.

    Original Title

    IBR CALC

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains calculations to determine the minimum required thickness of pipes and tubes based on design pressure and temperature. For pipe thickness, calculations are shown using Equation 91 from IBR 350 to determine minimum thicknesses of 4.54 mm and 6.45 mm for two pipe configurations. The provided thickness of 9.74 mm exceeds these minimums. For tube thickness, calculations use IBR 338(a) Equation 87 and determine a minimum thickness of 2.75 mm, which is less than the provided thickness of 3.24 mm. Both pipe and tube thicknesses are found to be satisfactory.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    562 views4 pages

    Progen: Pipe Thickness Calculation As Per IBR 350 Eqn.

    Uploaded by

    P s Jagatheesan
    The document contains calculations to determine the minimum required thickness of pipes and tubes based on design pressure and temperature. For pipe thickness, calculations are shown using Equation 91 from IBR 350 to determine minimum thicknesses of 4.54 mm and 6.45 mm for two pipe configurations. The provided thickness of 9.74 mm exceeds these minimums. For tube thickness, calculations use IBR 338(a) Equation 87 and determine a minimum thickness of 2.75 mm, which is less than the provided thickness of 3.24 mm. Both pipe and tube thicknesses are found to be satisfactory.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    DOC No.

    GIX-AFC-772300-DC-001
    PROGEN SYSTEMS AND TECHNOLOGIES LTD.,
    REV 0

    PROGEN CHENNAI SHEET 1 Of 1

    Pipe Thickness Calculation as per IBR 350 Eqn.(91)

    Drawing No. GIX-AFC-772300-P-001 Rev 0

    ECO-I ECO-II
    Units
    (791,792) (731,732)

    Design Pressure ( P ) kg/cm2(g) 129.0 129.0

    Design Temp. Deg C 340 500

    Material Specification SA 106 Gr. B SA 335 P22

    Outside Dia of the Pipe ( D ) mm 88.9 88.9

    Nom. Wall Thickness of the Pipe mm 11.13 11.13

    Negative Tolerance (12.5%) mm 1.39 1.39

    Efficiency Factor (e) 1 1

    C mm 0.00 0.00

    Maximum Allowable Stress ( f ) kg/cm2 1197.15 824.95


    (For Material @ Design Temp. From
    ASME SEC-II PART-D ED.2017
    Properties)

    Rewriting IBR Equation No. 350 Eqn.(91)

    Minimum Required Thickness

    T= PD + C
    2 f e+P

    Substituting the Values to the Above Equation

    T = ((129x88.9) / (2x1197.15x1+129))+0 mm 4.54


    T = ((129x88.9) / (2x824.95x1+129))+0 mm 6.45

    Provided Thk = Nom. Thk - Neg. Tolerance mm 9.74 9.74

    Result
    Minimum Required Thickness is less than the Provided Thickness
    Hence Satisfactory
    DOC No. GIX-AFC-788500-DC-001
    PROGEN SYSTEMS AND TECHNOLOGIES LTD.,
    REV 0

    PROGEN CHENNAI SHEET 1 of 1

    Tube Thickness Calculation as per IBR 338(a)

    Drawing No. GIX-AFC-788500-P-001 REV 0

    Units TYPE-1

    Design Pressure ( P ) kg/cm2(g) 126.00

    Design Temp. + Convection Superheater Tubes (39 oC) O


    C 502.0

    Material Specification SA 213 T22

    Tube External Diameter ( D ) mm 38.1

    Tube Thickness mm 3.60

    Negative Tolerance (10%) mm 0.36

    C mm 0.00

    Maximum Allowable Stress ( f ) kg/cm2 811.17

    (For Material @ Design Temp. From


    ASME SEC-II PART-D ED.2017 Properties)

    Rewriting IBR Equation No. 87

    Minimum Required Thickness, T =𝑃𝐷/(2 𝑓+𝑃)


    +𝐶
    Substituting the Values to the Above Equation

    T = ((126x38.1) / (2x811.17+126))+0 mm 2.75

    Provided Thickness = Thickness - Negative Tolerance = 3.6 - 0.36 mm 3.24

    Result:
    Minimum Required Thickness is Less than the Provided Thickness
    Hence, Satisfactory

    You might also like