Professional Documents
Culture Documents
Ibr Thickness Calculation: Definition
Ibr Thickness Calculation: Definition
Definition:
Thickness calculation:
t = ------------------------ + c
2 x f x e - WP
Where:
t = Calculated mimimum pipe thickness
WP = Max working pressure
D = Outside diameter
d = inside diameter
f = Allowable stress as computed from formulae below.
Allowable stress values as specified in the code of the country of manufacture are acceptable
in lieu of the figures computed from the formulae below provided they fall within limits
specified by these formulae.
e = Efficiency factor
c = 0.75 (Corrosion allowance)
Allowable stress as per ASME section II part D (for comparision with IBR)
Min of: R/4, 1.1/4 x Rt, 0.67 E, 0.67 Et, 0.67 Sr, 0.8 Sr min and 1.0 Sc
* It can be seen that ASME is more conservative than IBR and hence
allowable stress values as tabulated in ASME Section II part D
can be used in IBR thickness calculation.