<#auto page breaks>

SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-002
3 Unit Item 1 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 181800 151500 60600
11 Inlet Pressure p1 kg/cm²(g) 13.6 14.4 18
12 Dp Pressure dp kg/cm² 1.54 2.5 6.82
13 Inlet Temperature T1 °C 40.5 40.5 40.5
14 Inlet Density rho1 kg/m³ 776.6 776.6 776.6
15 Vapor Pressure pv kg/cm²(a) 0.7 0.7 0.7
16 Critical Pressure pc kg/cm²(a) 27.6 27.6 27.6
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 1.317 1.317 1.317
20 Outlet Velocity w m/s 3.68 3.07 1.23
21 Valve Coeff. Calculated Kv - 169 110 26.6
22 Relative Travel T % 69.7 52.6 24.1
23 Calculated Noise LA dB (A) 63 65 68
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 22.5 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 180 °C 79 In NPS 8" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 8" / /
28 Pressure Min 0 kg/cm²(g) Max 22.5 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 180 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 6 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material PTFE 94 Quantity 1
42 Packing Type standard NACE 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 260 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 130 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced PTFE 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.6 to 3.0 bar/0.6 ... 3 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 1 / FV-002 Page 1 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. TV-007B
3 Unit Item 2 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 54540 15150 6060
11 Inlet Pressure p1 kg/cm²(g) 10.4 10.8 11
12 Dp Pressure dp kg/cm² 0.4 0.8 1
13 Inlet Temperature T1 °C 40.5 40.5 40.5
14 Inlet Density rho1 kg/m³ 776.6 776.6 776.6
15 Vapor Pressure pv kg/cm²(a) 0.7 0.7 0.7
16 Critical Pressure pc kg/cm²(a) 27.6 27.6 27.6
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 1.317 1.317 1.317
20 Outlet Velocity w m/s 2.48 0.69 0.276
21 Valve Coeff. Calculated Kv - 100 19.4 6.94
22 Relative Travel T % 80.1 41.4 16.7
23 Calculated Noise LA dB (A) 48 43 41
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 13.75 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 180 °C 79 In NPS 6" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 6" / /
28 Pressure Min 0 kg/cm²(g) Max 13.75 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 180 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 4 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material PTFE 94 Quantity 1
42 Packing Type standard NACE 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 160 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 100 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 750 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 1.9 to 3.1 bar/1.9 ... 3.1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 2 / TV-007B Page 2 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-004
3 Unit Item 3 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Water
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 8333 7575 3030
11 Inlet Pressure p1 kg/cm²(g) 29 29 29
12 Dp Pressure dp kg/cm² 17.3 17.3 17.3
13 Inlet Temperature T1 °C 80 80 80
14 Inlet Density rho1 kg/m³ 973 973 973
15 Vapor Pressure pv kg/cm²(a) 0.483 0.483 0.483
16 Critical Pressure pc kg/cm²(a) 225 225 225
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.355 0.355 0.355
20 Outlet Velocity w m/s 4.85 4.41 1.76
21 Valve Coeff. Calculated Kv - 2.06 1.87 0.746
22 Relative Travel T % 75.5 68.8 28.8
23 Calculated Noise LA dB (A) 79 76 62
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 36.25 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 180 °C 79 In NPS 2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 2" / /
28 Pressure Min 0 kg/cm²(g) Max 36.25 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 180 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material PTFE 94 Quantity 1
42 Packing Type Standard 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 2.5 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 12 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Linear 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 316 / A479 316L 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L 111 Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.6 to 3.0 bar/1.2 ... 3.6 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 3 / FV-004 Page 3 of 48
01 Quotation-No. : 6027081 Customer : Samson Egypt
02 Name : tsch Project : Petrojet Project

03 Pos.-No. : 04 Rev. 3 Process Fluid : Hydrocarbon 03.03.2021

04 TAG - No. : TV-007A Upstream Conditions : Liquid
05 Process and Medium Data min norm max
06 Flow Rate [kg/h] W 60.600 151.500 181.800
07 Inlet Pressure [bara] p1 12,010 11,900 11,840
08 Outlet Pressure [bara] p2 11,710 11,700 11,700
09 Inlet Temperature [°C] t1 120,00 120,00 120,00
10 Density [kg/m³] rho 696,000 696,000 696,000
11 Vapor Pressure [bara] pv 3,400 3,400 3,400
12 Critical Pressure [bara] pc 27,6 27,6 27,6
13 Viscosity [mPas] eta 0,51 0,51 0,51
14 Ratio. Spc. Heat [cp/cv]
15 Compressibility Factor
16 Flashing [%]
17 Pipeline
18 Line size [mm] Da * s / PN (In) 219,1 x 8,18 / std Da * s / PN (Out) 219,1 x 8,18 / std
19 Results
20 Calculated Valve Coeff. [Kv] 133,10 419,48 624,07
21 Valve Opening in % 26 69 90
22 Outlet Velocity [m/s] 1,37 3,42 4,11
23 Max. admitted Velocity [m/s] 30,60 30,58 30,58
24 Mach
25 Acoustic Cap. Lev. LwA,a [dB(A)] 63 65 64
26 Sound Pres. Lev. LpA,a [dB(A)] 49 52 51
27 Flow Remark
28 Valve Data
29 Valve Style Rotary Plug Valve Valve Type 82.7 R
30 Body Size [inch] DN 6" Body Material 1.0619 / A216 WCC
31 Press. Rating [lbs] PN 150 Plug Material 1.4408
32 End Connections RF Seat Ring Material 1.4404
33 Face to Face [mm] 229 Guide Material 1.4404
34 Selected Valve Coeff. Kvs 720 Cvs 832 Plug/Seat Facing Metallic
35 Seat Diameter [mm] 105,0 Seat Fac. 1 Gaskets S.S. / Graphite
36 Leakage Class DIN 60534-4, KL IV G1 Packing PTFE / Graphite
37 Characteristic Equal % Bonnet Standard
38 Noise Reduction Flow Direction FTO
39 Actuator Data
Fail Position Spring to Open
40 Actuator Style Pneumatic Handwheel With
41 Actuator Type R 150v Stroke Time o/c [s] t
42 Spring Range [bar] 0,92 - 2,76 Req. Torque [Nm]Md 240
43 Air Supply [bar] 4 Max. Torque [Nm]Md 3420 (100°C)17-4pH
44 Max. Shut Off [bar] dp 13,75 Mounting A
45 Accessories
46 Positioner Type 3730-310 000 004 00000 000 Air Set Type 4708-5452, NPT1/4", 2 gauges
47 Limit Switches Type Piping S.S.
48 Solenoid Valve Type Others
49 Certification/Requirements Remarks
50 Material EN 10204 / 3.1 55 design temperature 157°C
51 Inspection EN 10204 / 3.1 56
52 Others NACE MR0103 57 with magnetic particle test
53 Cust. Std. 58 with hysteresis test
54 Weight kg 59 painting acc. EB005.060 Coating System No.3
01 Quotation-No. : 6027081 Customer : Samson Egypt
02 Name : tsch Project : Petrojet Project

03 Pos.-No. : 05 Rev. 3 Process Fluid : Hydrocarbon 03.03.2021

04 TAG - No. : PDV-004 Upstream Conditions : Liquid
05 Process and Medium Data min norm max
06 Flow Rate [kg/h] W 63.630 159.075 174.983
07 Inlet Pressure [bara] p1 11,700 11,700 11,700
08 Outlet Pressure [bara] p2 11,000 11,000 11,000
09 Inlet Temperature [°C] t1 119,50 119,50 119,50
10 Density [kg/m³] rho 705,700 705,700 705,700
11 Vapor Pressure [bara] pv 5,400 5,400 5,400
12 Critical Pressure [bara] pc 80,0 80,0 80,0
13 Viscosity [mPas] eta 0,69 0,69 0,69
14 Ratio. Spc. Heat [cp/cv]
15 Compressibility Factor
16 Flashing [%]
17 Pipeline
18 Line size [mm] Da * s / PN (In) 219,1 x 8,18 / std Da * s / PN (Out) 219,1 x 8,18 / std
19 Results
20 Calculated Valve Coeff. [Kv] 92,62 265,88 304,86
21 Valve Opening in % 34 77 85
22 Outlet Velocity [m/s] 3,19 7,97 8,77
23 Max. admitted Velocity [m/s] 24,94 24,94 24,94
24 Mach
25 Acoustic Cap. Lev. LwA,a [dB(A)] 67 71 71
26 Sound Pres. Lev. LpA,a [dB(A)] 53 57 58
27 Flow Remark
28 Valve Data
29 Valve Style Rotary Plug Valve Valve Type 82.7 R
30 Body Size [inch] DN 4" Body Material 1.0619 / A216 WCC
31 Press. Rating [lbs] PN 150 Plug Material 1.4408
32 End Connections RF Seat Ring Material 1.4404
33 Face to Face [mm] 194 Guide Material 1.4404
34 Selected Valve Coeff. Kvs 360 Cvs 416 Plug/Seat Facing Metallic
35 Seat Diameter [mm] 76,0 Seat Fac. 1 Gaskets S.S. / Graphite
36 Leakage Class DIN 60534-4, KL IV G1 Packing PTFE / Graphite
37 Characteristic Equal % Bonnet Standard
38 Noise Reduction Flow Direction FTO
39 Actuator Data
Fail Position Spring to Close
40 Actuator Style Pneumatic Handwheel With
41 Actuator Type R 150v Stroke Time o/c [s] t
42 Spring Range [bar] 0,92 - 2,76 Req. Torque [Nm]Md 127
43 Air Supply [bar] 4 Max. Torque [Nm]Md 1609 (100°C)17-4pH
44 Max. Shut Off [bar] dp 13,75 Mounting A
45 Accessories
46 Positioner Type 3730-310 000 004 00000 000 Air Set Type 4708-5452, NPT1/4", 2 gauges
47 Limit Switches Type Piping S.S.
48 Solenoid Valve Type Others
49 Certification/Requirements Remarks
50 Material EN 10204 / 3.1 55
51 Inspection EN 10204 / 3.1 56
52 Others NACE MR0103 57 with magnetic particle test
53 Cust. Std. 58 with hysteresis test
54 Weight kg 59 painting acc. EB005.060 Coating System No.3
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. LV-003
3 Unit Item 6 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Water
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 6846 6224 2490
11 Inlet Pressure p1 kg/cm²(g) 9.79 9.79 9.79
12 Dp Pressure dp kg/cm² 5.73 6.09 7.51
13 Inlet Temperature T1 °C 119.7 119.7 119.7
14 Inlet Density rho1 kg/m³ 944 944 944
15 Vapor Pressure pv kg/cm²(a) 2.01 2.01 2.01
16 Critical Pressure pc kg/cm²(a) 225 225 225
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.233 0.233 0.233
20 Outlet Velocity w m/s 1.6 1.46 0.583
21 Valve Coeff. Calculated Kv - 2.98 2.62 0.944
22 Relative Travel T % 80.8 77.6 51.5
23 Calculated Noise LA dB (A) 76 77 71
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 16.25 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 210 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 16.25 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 210 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3291 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 1/2 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket on metal core 316(L) 96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 6.3 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 24 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 12 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A182 F316 / A182 F316L 111 Ex Approval / Cert. /
59 Cage Material A487 CA6NM Class B/A276 S41500 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.4 ... 1.2 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 6 / LV-003 Page 6 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-015
3 Unit Item 07 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Hydro Carbon
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 200 50 20
11 Inlet Pressure p1 kg/cm²(g) 5.5 5.5 5.5
12 Dp Pressure dp kg/cm² 4.606 4.656 4.706
13 Inlet Temperature T1 °C 30 30 30
14 Inlet Density rho1 kg/m³ 4.561 4.561 4.561
15 Vapor Pressure pv bar(a)
16 Critical Pressure pc bar(a)
17 Ratio of Specific Heats γ - 1.316 1.316 1.316
18 Compressibility Z -
19 Inlet Viscosity η cP 0.012 0.012 0.012
20 Outlet Velocity w Mach 0.0908 0.0233 0.00958
21 Valve Coeff. Calculated Kv - 2.04 0.504 0.201
22 Relative Travel T % 76.6 46.7 22.7
23 Calculated Noise LA dB (A) 72 62 57
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 7 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 55 °C 79 In NPS 2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 2" / /
28 Pressure Min 0 kg/cm²(g) Max 7 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 54.5 mm / 2.9 mm
29 Temperature Min 0 °C Max 55 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 1/2 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 4 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 12 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A479 XM-19-H 108 Quantity
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.4 ... 2 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 07 / PV-015 Page 7 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-016A
3 Unit Item 08 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Vapor
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 1735 1577 631
11 Inlet Pressure p1 kg/cm²(g) 0.78 0.79 0.84
12 Dp Pressure dp kg/cm² 0.22 0.24 0.33
13 Inlet Temperature T1 °C 56 56 56
14 Inlet Density rho1 kg/m³ 4.2 4.2 4.2
15 Vapor Pressure pv bar(a)
16 Critical Pressure pc bar(a)
17 Ratio of Specific Heats γ - 1.095 1.095 1.095
18 Compressibility Z -
19 Inlet Viscosity η cP 0.008 0.008 0.008
20 Outlet Velocity w Mach 0.121 0.111 0.0461
21 Valve Coeff. Calculated Kv - 62.2 54.5 19
22 Relative Travel T % 90.4 83.8 49.3
23 Calculated Noise LA dB (A) 63 63 59
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 3.9 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 125 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 3.9 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 54.5 mm / 2.9 mm
29 Temperature Min 0 °C Max 125 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 80 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 08 / PV-016A Page 8 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-016B
3 Unit Item 09 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Vapor
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 1735 1577 631
11 Inlet Pressure p1 kg/cm²(g) 0.78 0.79 0.84
12 Dp Pressure dp kg/cm² 0.32 0.34 0.43
13 Inlet Temperature T1 °C 56 56 56
14 Inlet Density rho1 kg/m³ 4.2 4.2 4.2
15 Vapor Pressure pv bar(a)
16 Critical Pressure pc bar(a)
17 Ratio of Specific Heats γ - 1.095 1.095 1.095
18 Compressibility Z -
19 Inlet Viscosity η cP 0.008 0.008 0.008
20 Outlet Velocity w Mach 0.129 0.118 0.0492
21 Valve Coeff. Calculated Kv - 53.4 47.4 17.2
22 Relative Travel T % 82.9 77.7 46.9
23 Calculated Noise LA dB (A) 69 68 62
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 3.9 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 125 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 3.9 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 54.5 mm / 2.9 mm
29 Temperature Min 0 °C Max 125 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 80 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 1.3 to 2.9 bar/1.7 ... 3.3 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 09 / PV-016B Page 9 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-011
3 Unit Item 10 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 11422 9518 3807
11 Inlet Pressure p1 kg/cm²(g) 12.2 12.7 15.7
12 Dp Pressure dp kg/cm² 8.5 9.2 12.4
13 Inlet Temperature T1 °C 56.6 56.6 56.6
14 Inlet Density rho1 kg/m³ 648 648 648
15 Vapor Pressure pv kg/cm²(a) 1.877 1.877 1.877
16 Critical Pressure pc kg/cm²(a) 38.5 38.5 38.5
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.48 0.48 0.48
20 Outlet Velocity w m/s 0.974 0.812 0.325
21 Valve Coeff. Calculated Kv - 4.92 3.94 1.36
22 Relative Travel T % 52.9 48.7 23.7
23 Calculated Noise LA dB (A) 83 82 76
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 19.625 kg/cm²(g)78 Size / Rating / Pipe Class
26 t1max Max 125 °C 79 In NPS 6" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 6" / /
28 Pressure Min 0 kg/cm²(g) Max 19.625 kg/cm²(g)81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 125 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 25 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 38 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 10 / FV-011 Page 10 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-012
3 Unit Item 11 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 48209 40174 16070
11 Inlet Pressure p1 kg/cm²(g) 12.17 12.72 15.7
12 Dp Pressure dp kg/cm² 0.27 1.2 4.91
13 Inlet Temperature T1 °C 39.9 39.9 39.9
14 Inlet Density rho1 kg/m³ 665 665 665
15 Vapor Pressure pv kg/cm²(a) 1.18 1.18 1.18
16 Critical Pressure pc kg/cm²(a) 38.5 38.5 38.5
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.469 0.469 0.469
20 Outlet Velocity w m/s 2.56 2.14 0.855
21 Valve Coeff. Calculated Kv - 115 45.4 8.98
22 Relative Travel T % 85.9 57.1 23.7
23 Calculated Noise LA dB (A) 45 54 58
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 19.625 kg/cm²(g)78 Size / Rating / Pipe Class
26 t1max Max 125 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 19.625 kg/cm²(g)81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 125 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 4 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material PTFE 94 Quantity 1
42 Packing Type standard NACE 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 160 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 100 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced PTFE 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.8 ... 2.4 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel - 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 11 / FV-012 Page 11 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. LV-015
3 Unit Item 12 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Water
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 2586 1293 517.2
11 Inlet Pressure p1 kg/cm²(g) 5.13 5.35 7.45
12 Dp Pressure dp kg/cm² 1.61 2.11 3.72
13 Inlet Temperature T1 °C 56 56 56
14 Inlet Density rho1 kg/m³ 985 985 986
15 Vapor Pressure pv kg/cm²(a) 0.169 0.169 0.169
16 Critical Pressure pc kg/cm²(a) 225 225 225
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.496 0.496 0.496
20 Outlet Velocity w m/s 1.49 0.743 0.297
21 Valve Coeff. Calculated Kv - 2.08 0.906 0.273
22 Relative Travel T % 77 60.7 30.5
23 Calculated Noise LA dB (A) 47 44 42
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 9.3 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 125 °C 79 In NPS 2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 2" / /
28 Pressure Min 0 kg/cm²(g) Max 9.3 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 125 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 4 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 12 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A479 XM-19-H 108 Quantity
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L 111 Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.4 ... 1.2 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 12 / LV-015 Page 12 of 48
01 Quotation-No. : 6027081 Customer : Samson Egypt
02 Name : tsch Project : Petrojet Project

03 Pos.-No. : 13 Rev. 3 Process Fluid : Hydrocarbon 03.03.2021

04 TAG - No. : FV-020 Upstream Conditions : Liquid
05 Process and Medium Data min norm max
06 Flow Rate [kg/h] W 42.524 106.311 127.573
07 Inlet Pressure [bara] p1 7,290 6,650 6,510
08 Outlet Pressure [bara] p2 4,670 5,190 5,910
09 Inlet Temperature [°C] t1 221,90 221,90 221,90
10 Density [kg/m³] rho 641,100 641,100 641,100
11 Vapor Pressure [bara] pv 2,357 2,357 2,357
12 Critical Pressure [bara] pc 24,7 24,7 24,7
13 Viscosity [mPas] eta 0,62 0,62 0,62
14 Ratio. Spc. Heat [cp/cv]
15 Compressibility Factor
16 Flashing [%]
17 Pipeline
18 Line size [mm] Da * s / PN (In) 168,3 x 7,11 / std Da * s / PN (Out) 168,3 x 7,11 / std
19 Results
20 Calculated Valve Coeff. [Kv] 36,50 112,05 220,93
21 Valve Opening in % 15 40 68
22 Outlet Velocity [m/s] 2,35 5,86 7,04
23 Max. admitted Velocity [m/s] 16,82 18,61 20,84
24 Mach
25 Acoustic Cap. Lev. LwA,a [dB(A)] 85 75 69
26 Sound Pres. Lev. LpA,a [dB(A)] 71 62 55
27 Flow Remark cavitation cavitation
28 Valve Data
29 Valve Style Rotary Plug Valve Valve Type 82.7 R
30 Body Size [inch] DN 4" Body Material 1.0619 / A216 WCC
31 Press. Rating [lbs] PN 150 Plug Material 1.4408 stel 6
32 End Connections RF Seat Ring Material 1.4404 stel 6
33 Face to Face [mm] 194 Guide Material 1.4404
34 Selected Valve Coeff. Kvs 360 Cvs 416 Plug/Seat Facing Metallic
35 Seat Diameter [mm] 76,0 Seat Fac. 1 Gaskets S.S. / Graphite
36 Leakage Class DIN 60534-4, KL IV G1 Packing PTFE / Graphite
37 Characteristic Equal % Bonnet Standard
38 Noise Reduction Flow Direction FTO
39 Actuator Data
Fail Position Spring to Open
40 Actuator Style Pneumatic Handwheel With
41 Actuator Type R 150v Stroke Time o/c [s] t
42 Spring Range [bar] 0,92 - 2,76 Req. Torque [Nm]Md 92
43 Air Supply [bar] 4 Max. Torque [Nm]Md 1609 (100°C)17-4pH
44 Max. Shut Off [bar] dp 9,11 Mounting A
45 Accessories
46 Positioner Type 3730-310 000 004 00000 000 Air Set Type 4708-5452, NPT1/4", 2 gauges
47 Limit Switches Type Piping S.S.
48 Solenoid Valve Type Others
49 Certification/Requirements Remarks
50 Material EN 10204 / 3.1 55 cavitation: stellited trim is sufficient, recommend max. outlet velocity
51 Inspection EN 10204 / 3.1 56 for cavitation is 5-6m/s
52 Others NACE MR0103 57 Rev.3: changed shut off and actuator
53 Cust. Std. 58 with magnetic particle test, with hysteresis test
54 Weight kg 59 painting acc. EB005.060 Coating System No.3
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-022
3 Unit Item 14 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 97116 80930 32372
11 Inlet Pressure p1 kg/cm²(g) 5.02 5.16 5.79
12 Dp Pressure dp kg/cm² 1.14 1.51 2.58
13 Inlet Temperature T1 °C 264 264 264
14 Inlet Density rho1 kg/m³ 637 637 637
15 Vapor Pressure pv kg/cm²(a) 2.503 2.503 2.503
16 Critical Pressure pc kg/cm²(a) 21.7 21.7 21.7
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.105 0.105 0.105
20 Outlet Velocity w m/s 2.4 2 0.799
21 Valve Coeff. Calculated Kv - 115 83.3 25.5
22 Relative Travel T % 86.6 74.4 47.3
23 Calculated Noise LA dB (A) 78 81 78
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 7.5 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 325 °C 79 In NPS 6" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 6" / /
28 Pressure Min 0 kg/cm²(g) Max 7.5 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 325 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 6 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,
96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 160 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 100 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 25 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 700 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 14 / FV-022 Page 14 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-025
3 Unit Item 15 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 20115 11494 4598
11 Inlet Pressure p1 kg/cm²(g) 4.31 4.73 5.31
12 Dp Pressure dp kg/cm² 0.72 1.67 2.64
13 Inlet Temperature T1 °C 288.3 288.3 288.3
14 Inlet Density rho1 kg/m³ 644.2 644.2 644.2
15 Vapor Pressure pv kg/cm²(a) 2.577 2.577 2.577
16 Critical Pressure pc kg/cm²(a) 19.6 19.6 19.6
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.039 0.039 0.039
20 Outlet Velocity w m/s 1.73 0.986 0.394
21 Valve Coeff. Calculated Kv - 29.9 11.2 3.56
22 Relative Travel T % 80.2 58.4 31
23 Calculated Noise LA dB (A) 48 68 65
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 7 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 325 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 7 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 325 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,
96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 63 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 63 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182
111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.4 ... 2 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 15 / FV-025 Page 15 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-026
3 Unit Item 16 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Steam
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 2040 1700 680
11 Inlet Pressure p1 kg/cm²(g) 15 15 15
12 Dp Pressure dp kg/cm² 13.3 13.3 13.3
13 Inlet Temperature T1 °C 250 250 250
14 Inlet Density v1 m³/kg 0.145 0.145 0.145
15 Vapor Pressure pv kg/cm²(a)
16 Critical Pressure pc kg/cm²(a)
17 Ratio of Specific Heats γ - 1.3 1.3 1.3
18 Compressibility Z -
19 Inlet Viscosity η cP 0.0179 0.0179 0.0179
20 Outlet Velocity w Mach 0.115 0.0962 0.0385
21 Valve Coeff. Calculated Kv - 10.8 8.99 3.57
22 Relative Travel T % 69.6 65.2 48.2
23 Calculated Noise LA dB (A) 78 77 71
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 18.75 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 18.75 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 4 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 22 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 38 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction Flow div. I 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 316 / A479 316L 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. 316L 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.6 to 3.0 bar/1.2 ... 3.6 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 16 / FV-026 Page 16 of 48
01 Quotation-No. : 6027081 Customer : Samson Egypt
02 Name : tsch Project : Petrojet Project

03 Pos.-No. : 17 Rev. 3 Process Fluid : Hydrocarbon 03.03.2021

04 TAG - No. : LV-028 Upstream Conditions : Liquid
05 Process and Medium Data min norm max
06 Flow Rate [kg/h] W 15.722 39.304 43.234
07 Inlet Pressure [bara] p1 2,850 2,850 2,850
08 Outlet Pressure [bara] p2 2,590 2,710 2,740
09 Inlet Temperature [°C] t1 288,10 288,10 288,10
10 Density [kg/m³] rho 643,200 643,200 643,200
11 Vapor Pressure [bara] pv 1,596 1,596 1,596
12 Critical Pressure [bara] pc 19,6 19,6 19,6
13 Viscosity [mPas] eta 0,04 0,04 0,04
14 Ratio. Spc. Heat [cp/cv]
15 Compressibility Factor
16 Flashing [%]
17 Pipeline
18 Line size [mm] Da * s / PN (In) 168,3 x 7,11 / std Da * s / PN (Out) 168,3 x 7,11 / std
19 Results
20 Calculated Valve Coeff. [Kv] 38,80 147,32 197,49
21 Valve Opening in % 24 72 91
22 Outlet Velocity [m/s] 1,35 3,38 3,71
23 Max. admitted Velocity [m/s] 11,01 11,65 11,81
24 Mach
25 Acoustic Cap. Lev. LwA,a [dB(A)] 56 57 56
26 Sound Pres. Lev. LpA,a [dB(A)] 42 44 43
27 Flow Remark
28 Valve Data
29 Valve Style Rotary Plug Valve Valve Type 82.7 R
30 Body Size [inch] DN 3" Body Material 1.0619 / A216 WCC
31 Press. Rating [lbs] PN 150 Plug Material 1.4408
32 End Connections RF Seat Ring Material 1.4404
33 Face to Face [mm] 165 Guide Material 1.4404
34 Selected Valve Coeff. Kvs 220 Cvs 254 Plug/Seat Facing Metallic
35 Seat Diameter [mm] 60,0 Seat Fac. 1 Gaskets S.S. / Graphite
36 Leakage Class DIN 60534-4, KL IV G1 Packing PTFE / Graphite
37 Characteristic Equal % Bonnet Standard
38 Noise Reduction Flow Direction FTO
39 Actuator Data
Fail Position Spring to Close
40 Actuator Style Pneumatic Handwheel With
41 Actuator Type R 110v Stroke Time o/c [s] t
42 Spring Range [bar] 1,16 - 2,76 Req. Torque [Nm]Md 34
43 Air Supply [bar] 4 Max. Torque [Nm]Md 892 (100°C)17-4pH
44 Max. Shut Off [bar] dp 3,5 Mounting A
45 Accessories
46 Positioner Type 3730-310 000 004 00000 000 Air Set Type 4708-5452, NPT1/4", 2 gauges
47 Limit Switches Type Piping S.S.
48 Solenoid Valve Type Others
49 Certification/Requirements Remarks
50 Material EN 10204 / 3.1 55
51 Inspection EN 10204 / 3.1 56
52 Others NACE MR0103 57 with magnetic particle test
53 Cust. Std. 58 with hysteresis test
54 Weight kg 59 painting acc. EB005.060 Coating System No.4
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-030
3 Unit Item 18 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Steam
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 1140 350 140
11 Inlet Pressure p1 kg/cm²(g) 15 15 15
12 Dp Pressure dp kg/cm² 13.3 13.3 13.3
13 Inlet Temperature T1 °C 250 250 250
14 Inlet Density v1 m³/kg 0.145 0.145 0.145
15 Vapor Pressure pv kg/cm²(a)
16 Critical Pressure pc kg/cm²(a)
17 Ratio of Specific Heats γ - 1.3 1.3 1.3
18 Compressibility Z -
19 Inlet Viscosity η cP 0.0179 0.0179 0.0179
20 Outlet Velocity w Mach 0.101 0.031 0.0124
21 Valve Coeff. Calculated Kv - 6.03 1.84 0.734
22 Relative Travel T % 87.2 54.8 26.9
23 Calculated Noise LA dB (A) 83 66 54
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 18.75 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 18.75 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 10 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 24 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.8 ... 2.4 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 18 / FV-030 Page 18 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. LV-030
3 Unit Item 19 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 16143 14675 5870
11 Inlet Pressure p1 kg/cm²(g) 2.35 2.35 2.35
12 Dp Pressure dp kg/cm² 0.585 0.815 0.73
13 Inlet Temperature T1 °C 263.8 263.8 263.8
14 Inlet Density rho1 kg/m³ 637.2 637.2 637.2
15 Vapor Pressure pv kg/cm²(a) 1.37 1.37 1.37
16 Critical Pressure pc kg/cm²(a) 21.7 21.7 21.7
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.105 0.105 0.105
20 Outlet Velocity w m/s 1.4 1.27 0.509
21 Valve Coeff. Calculated Kv - 26.8 20.6 8.7
22 Relative Travel T % 88.8 81.7 60.7
23 Calculated Noise LA dB (A) 58 66 45
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 3.5 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 325 °C 79 In NPS 6" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 6" / /
28 Pressure Min 0 kg/cm²(g) Max 3.5 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 325 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 40 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 50 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Stellited 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.6 to 3.0 bar/0.6 ... 3 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.92.1 Item / Tag 19 / LV-030 Page 19 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-038
3 Unit Item 20 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 42740 24932 9973
11 Inlet Pressure p1 kg/cm²(g) 9.04 9.78 12.25
12 Dp Pressure dp kg/cm² 0.94 1.34 1.93
13 Inlet Temperature T1 °C 290.8 290.8 290.8
14 Inlet Density rho1 kg/m³ 657.3 657.3 657.3
15 Vapor Pressure pv kg/cm²(a) 1.87 1.87 1.87
16 Critical Pressure pc kg/cm²(a) 18.4 18.4 18.4
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.051 0.051 0.051
20 Outlet Velocity w m/s 3.59 2.1 0.838
21 Valve Coeff. Calculated Kv - 55.2 26.9 8.94
22 Relative Travel T % 78.3 62.4 39.1
23 Calculated Noise LA dB (A) 56 54 49
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 15.31 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 15.31 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A217 C5 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 100 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 750 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 1.9 to 3.1 bar/1.9 ... 3.1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 20 / FV-038 Page 20 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-039
3 Unit Item 21 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 26400 24000 9600
11 Inlet Pressure p1 kg/cm²(g) 10.7 10.9 12.2
12 Dp Pressure dp kg/cm² 6.48 7.12 10.5
13 Inlet Temperature T1 °C 260.5 260.5 260.5
14 Inlet Density rho1 kg/m³ 651.1 651.1 651.1
15 Vapor Pressure pv kg/cm²(a) 2.5 2.5 2.5
16 Critical Pressure pc kg/cm²(a) 21.8 21.8 21.8
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.098 0.098 0.098
20 Outlet Velocity w m/s 2.24 2.04 0.815
21 Valve Coeff. Calculated Kv - 13 11.3 3.71
22 Relative Travel T % 88.7 84 59.5
23 Calculated Noise LA dB (A) 85 84 66
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 15.25 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 325 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 15.25 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 325 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 16 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 31 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.6 to 3.0 bar/0.6 ... 1.8 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 21 / FV-039 Page 21 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PDV-013
3 Unit Item 22 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 42740 10685 4274
11 Inlet Pressure p1 kg/cm²(g) 10.15 10.49 12.37
12 Dp Pressure dp kg/cm² 2.04 2.04 2.04
13 Inlet Temperature T1 °C 324.2 324.2 324.2
14 Inlet Density rho1 kg/m³ 627.2 627.2 627.2
15 Vapor Pressure pv kg/cm²(a) 2.503 2.503 2.503
16 Critical Pressure pc kg/cm²(a) 18.4 18.4 18.4
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.048 0.048 0.048
20 Outlet Velocity w m/s 3.77 0.941 0.377
21 Valve Coeff. Calculated Kv - 38.2 9.54 3.82
22 Relative Travel T % 86.2 54.6 32.6
23 Calculated Noise LA dB (A) 61 50 43
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 15.46 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 15.46 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A217 C5 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 63 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 63 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 750 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 22 / PDV-013 Page 22 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-036
3 Unit Item 23 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Steam
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 800 200 80
11 Inlet Pressure p1 kg/cm²(g) 15 15 15
12 Dp Pressure dp kg/cm² 13.3 13.3 13.3
13 Inlet Temperature T1 °C 250 250 250
14 Inlet Density v1 m³/kg 0.145 0.145 0.145
15 Vapor Pressure pv kg/cm²(a)
16 Critical Pressure pc kg/cm²(a)
17 Ratio of Specific Heats γ - 1.3 1.3 1.3
18 Compressibility Z -
19 Inlet Viscosity η cP 0.0179 0.0179 0.0179
20 Outlet Velocity w Mach 0.0708 0.0177 0.00708
21 Valve Coeff. Calculated Kv - 4.22 1.05 0.419
22 Relative Travel T % 78.1 37.5 12.8
23 Calculated Noise LA dB (A) 78 58 47
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 18.75 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 18.75 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 10 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 24 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 316 / A479 316L 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.8 ... 2.4 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 23 / FV-036 Page 23 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. LV-031
3 Unit Item 24 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 41214.8 37468 14987.2
11 Inlet Pressure p1 kg/cm²(g) 2.63 2.64 2.65
12 Dp Pressure dp kg/cm² 0.98 1.03 1.26
13 Inlet Temperature T1 °C 221.7 221.7 221.7
14 Inlet Density rho1 kg/m³ 640.1 640.1 640.1
15 Vapor Pressure pv kg/cm²(a) 1.323 1.323 1.323
16 Critical Pressure pc kg/cm²(a) 24.7 24.7 24.7
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.396 0.396 0.396
20 Outlet Velocity w m/s 3.56 3.23 1.29
21 Valve Coeff. Calculated Kv - 53.4 47.2 16.9
22 Relative Travel T % 77.4 74.5 52.5
23 Calculated Noise LA dB (A) 77 77 71
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 3.5 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 325 °C 79 In NPS 6" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 6" / /
28 Pressure Min 0 kg/cm²(g) Max 3.5 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 325 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,
96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 100 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.4 ... 2 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 24 / LV-031 Page 24 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-043
3 Unit Item 25 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Steam
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 1110 220 88
11 Inlet Pressure p1 kg/cm²(g) 15 15 15
12 Dp Pressure dp kg/cm² 13.3 13.3 13.3
13 Inlet Temperature T1 °C 250 250 250
14 Inlet Density v1 m³/kg 0.145 0.145 0.145
15 Vapor Pressure pv kg/cm²(a)
16 Critical Pressure pc kg/cm²(a)
17 Ratio of Specific Heats γ - 1.3 1.3 1.3
18 Compressibility Z -
19 Inlet Viscosity η cP 0.0179 0.0179 0.0179
20 Outlet Velocity w Mach 0.0982 0.0195 0.00778
21 Valve Coeff. Calculated Kv - 5.87 1.15 0.461
22 Relative Travel T % 86.5 40.7 14.9
23 Calculated Noise LA dB (A) 83 59 48
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 18.75 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 18.75 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 10 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 24 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 316 / A479 316L 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.8 ... 2.4 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 25 / FV-043 Page 25 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-041
3 Unit Item 26 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 29655 9935 3974
11 Inlet Pressure p1 kg/cm²(g) 9.75 9.85 12.25
12 Dp Pressure dp kg/cm² 0.33 0.91 1.23
13 Inlet Temperature T1 °C 257.8 257.8 257.8
14 Inlet Density rho1 kg/m³ 684.7 684.7 684.7
15 Vapor Pressure pv kg/cm²(a) 1.012 1.012 1.012
16 Critical Pressure pc kg/cm²(a) 18.4 18.4 18.4
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.052 0.052 0.052
20 Outlet Velocity w m/s 2.39 0.802 0.321
21 Valve Coeff. Calculated Kv - 63.4 12.7 4.37
22 Relative Travel T % 82.4 46.3 24
23 Calculated Noise LA dB (A) 46 44 41
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 15.31 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 15.31 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A217 C5 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 100 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 750 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 1.9 to 3.1 bar/1.9 ... 3.1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 26 / FV-041 Page 26 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-042
3 Unit Item 27 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 4000 3000 1200
11 Inlet Pressure p1 kg/cm²(g) 12.6 12.9 15
12 Dp Pressure dp kg/cm² 11.1 11.3 13.5
13 Inlet Temperature T1 °C 223.4 223.4 223.4
14 Inlet Density rho1 kg/m³ 642.4 642.4 642.4
15 Vapor Pressure pv kg/cm²(a) 2.36 2.36 2.36
16 Critical Pressure pc kg/cm²(a) 18.4 18.4 18.4
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.366 0.366 0.366
20 Outlet Velocity w m/s 1.38 1.03 0.413
21 Valve Coeff. Calculated Kv - 1.53 1.13 0.414
22 Relative Travel T % 85.7 78.4 52.5
23 Calculated Noise LA dB (A) 65 66 59
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 18.75 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 280 °C 79 In NPS 1 1/2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 1 1/2" / /
28 Pressure Min 0 kg/cm²(g) Max 18.75 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 280 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 1/2 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 2.5 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 12 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 12 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.4 ... 1.2 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 27 / FV-042 Page 27 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PDV-017
3 Unit Item 28 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 29655 19721 7888
11 Inlet Pressure p1 kg/cm²(g) 10.25 10.56 12.37
12 Dp Pressure dp kg/cm² 1.34 1.34 1.34
13 Inlet Temperature T1 °C 324.2 324.2 324.2
14 Inlet Density rho1 kg/m³ 627.2 627.2 627.2
15 Vapor Pressure pv kg/cm²(a) 2.576 2.576 2.576
16 Critical Pressure pc kg/cm²(a) 18.4 18.4 18.4
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.048 0.048 0.048
20 Outlet Velocity w m/s 2.61 1.74 0.695
21 Valve Coeff. Calculated Kv - 32.7 21.7 8.69
22 Relative Travel T % 82.2 72.8 52.7
23 Calculated Noise LA dB (A) 55 51 44
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 15.46 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 15.46 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A217 C5 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 63 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 63 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 750 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 1.9 to 3.1 bar/1.9 ... 3.1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 28 / PDV-017 Page 28 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-060
3 Unit Item 29 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium FUEL GAS
8 Phase gas Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 200 50 20
11 Inlet Pressure p1 kg/cm²(g) 5.5 5.5 5.5
12 Dp Pressure dp kg/cm² 4.16 4.68 4.71
13 Inlet Temperature T1 °C 30 30 30
14 Inlet Density rho1 kg/m³ 4.561 4.561 4.561
15 Vapor Pressure pv kg/cm²(a)
16 Critical Pressure pc kg/cm²(a)
17 Ratio of Specific Heats γ - 1.316 1.316 1.316
18 Compressibility Z - 0.99 0.99 0.99
19 Inlet Viscosity η cP 0.012 0.012 0.012
20 Outlet Velocity w Mach 0.0399 0.0128 0.0052
21 Valve Coeff. Calculated Kv - 2.04 0.504 0.201
22 Relative Travel T % 76.7 46.7 22.7
23 Calculated Noise LA dB (A) 67 59 54
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 7 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 30 °C 79 In NPS 2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 2" / /
28 Pressure Min 0 kg/cm²(g) Max 7 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 55 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 2 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 4 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 12 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A479 XM-19-H 108 Quantity
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.92.1 Item / Tag 29 / PV-060 Page 29 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-061A
3 Unit Item 30 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC GAS
8 Phase gas Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 977.9 889 355.6
11 Inlet Pressure p1 kg/cm²(g) 0.643 0.653 0.695
12 Dp Pressure dp kg/cm² 0.082 0.103 0.637
13 Inlet Temperature T1 °C 98 98 98
14 Inlet Density rho1 kg/m³ 2.3 2.3 2.3
15 Vapor Pressure pv bar(a)
16 Critical Pressure pc bar(a)
17 Ratio of Specific Heats γ - 1.126 1.126 1.126
18 Compressibility Z - 0.99 0.99 0.99
19 Inlet Viscosity η cP 0.01 0.01 0.01
20 Outlet Velocity w Mach 0.0875 0.0803 0.0472
21 Valve Coeff. Calculated Kv - 74 60.5 11.7
22 Relative Travel T % 79 70.2 30.6
23 Calculated Noise LA dB (A) 43 44 66
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 3.9 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 150 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 3.9 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 54.5 mm / 2.9 mm
29 Temperature Min 0 °C Max 150 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 100 100 Qty. / Switch. Func. /
48 Rated Travel 19 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 0.7 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 30 / PV-061A Page 30 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-061B
3 Unit Item 31 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC GAS
8 Phase gas Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 977.9 889 355.6
11 Inlet Pressure p1 kg/cm²(g) 0.643 0.653 0.695
12 Dp Pressure dp kg/cm² 0.182 0.203 0.287
13 Inlet Temperature T1 °C 98 98 98
14 Inlet Density rho1 kg/m³ 2.3 2.3 2.3
15 Vapor Pressure pv bar(a)
16 Critical Pressure pc bar(a)
17 Ratio of Specific Heats γ - 1.126 1.126 1.126
18 Compressibility Z - 0.99 0.99 0.99
19 Inlet Viscosity η cP 0.01 0.01 0.01
20 Outlet Velocity w Mach 0.0934 0.0858 0.0357
21 Valve Coeff. Calculated Kv - 51.5 44.6 15.3
22 Relative Travel T % 64.1 59.4 34.7
23 Calculated Noise LA dB (A) 56 57 55
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 3.9 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 150 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 3.9 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 54.5 mm / 2.9 mm
29 Temperature Min 0 °C Max 150 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 100 100 Qty. / Switch. Func. /
48 Rated Travel 19 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/1.4 ... 2.4 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 31 / PV-061B Page 31 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. LV-033
3 Unit Item 32 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium OILY WATER
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 4402 2201 880.4
11 Inlet Pressure p1 kg/cm²(g) 5.22 5.39 6.55
12 Dp Pressure dp kg/cm² 0.78 1.05 1.93
13 Inlet Temperature T1 °C 98.1 98.1 98.1
14 Inlet Density rho1 kg/m³ 944 944 944
15 Vapor Pressure pv kg/cm²(a) 2.01 2.01 2.01
16 Critical Pressure pc kg/cm²(a) 225 225 225
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.233 0.233 0.233
20 Outlet Velocity w m/s 2.64 1.32 0.528
21 Valve Coeff. Calculated Kv - 5.28 2.24 0.659
22 Relative Travel T % 81.8 61.5 28.3
23 Calculated Noise LA dB (A) 46 42 41
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 9.1 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 150 °C 79 In NPS 2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 2" / /
28 Pressure Min 0 kg/cm²(g) Max 9.1 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 150 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 10 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 24 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A479 XM-19-H 108 Quantity
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L 111 Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.8 ... 2.4 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 32 / LV-033 Page 32 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-065
3 Unit Item 33 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium OILY WATER
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 6988 3494 1397.6
11 Inlet Pressure p1 kg/cm²(g) 3.74 3.63 4.51
12 Dp Pressure dp kg/cm² 0.78 1.05 1.93
13 Inlet Temperature T1 °C 39.9 39.9 39.9
14 Inlet Density rho1 kg/m³ 944 944 944
15 Vapor Pressure pv kg/cm²(a) 2.01 2.01 2.01
16 Critical Pressure pc kg/cm²(a) 225 225 225
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.233 0.233 0.233
20 Outlet Velocity w m/s 4.19 2.09 0.838
21 Valve Coeff. Calculated Kv - 8.63 3.57 1.05
22 Relative Travel T % 92.2 73.3 40.6
23 Calculated Noise LA dB (A) 50 46 44
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 9.1 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 150 °C 79 In NPS 2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 2" / /
28 Pressure Min 0 kg/cm²(g) Max 9.1 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 150 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 10 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 24 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A479 XM-19-H 108 Quantity
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L 111 Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.8 ... 2.4 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 33 / PV-065 Page 33 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-044
3 Unit Item 34 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 112390 93658 37463
11 Inlet Pressure p1 kg/cm²(g) 14 14.6 16.9
12 Dp Pressure dp kg/cm² 9.3 10.1 12.63
13 Inlet Temperature T1 °C 98.7 98.7 98.7
14 Inlet Density rho1 kg/m³ 696 696 696
15 Vapor Pressure pv kg/cm²(a) 1.736 1.736 1.736
16 Critical Pressure pc kg/cm²(a) 30.5 30.5 30.5
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.897 0.897 0.897
20 Outlet Velocity w m/s 2.54 2.12 0.846
21 Valve Coeff. Calculated Kv - 62.9 43.2 13
22 Relative Travel T % 82.1 72.5 46.9
23 Calculated Noise LA dB (A) 83 84 80
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 21.125 kg/cm²(g)78 Size / Rating / Pipe Class
26 t1max Max 150 °C 79 In NPS 6" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 6" / /
28 Pressure Min 0 kg/cm²(g) Max 21.125 kg/cm²(g)81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 150 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 6 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 100 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 25 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 750 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type 3381-4
68 Actuator Style Pneumatic 121 Size In / Out NPS 6 / NPS 6
69 Stroke Limit. - 122 Rating Class 300
70 Membrane Material NBR 123 Plates Material A105 Qty. 2
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 34 / FV-044 Page 34 of 48
01 Quotation-No. : 6027081 Customer : Samson Egypt
02 Name : tsch Project : Petrojet Project

03 Pos.-No. : 35 Rev. 3 Process Fluid : Hydrocarbon 03.03.2021

04 TAG - No. : FV-045 Upstream Conditions : Liquid
05 Process and Medium Data min norm max
06 Flow Rate [kg/h] W 12.300 30.750 36.900
07 Inlet Pressure [bara] p1 17,840 15,300 14,500
08 Outlet Pressure [bara] p2 13,760 13,900 14,000
09 Inlet Temperature [°C] t1 39,90 39,90 39,90
10 Density [kg/m³] rho 745,400 745,400 745,400
11 Vapor Pressure [bara] pv 0,350 0,350 0,350
12 Critical Pressure [bara] pc 30,5 30,5 30,5
13 Viscosity [mPas] eta 0,90 0,90 0,90
14 Ratio. Spc. Heat [cp/cv]
15 Compressibility Factor
16 Flashing [%]
17 Pipeline
18 Line size [mm] Da * s / PN (In) 168,3 x 7,11 / std Da * s / PN (Out) 168,3 x 7,11 / std
19 Results
20 Calculated Valve Coeff. [Kv] 7,06 30,29 61,88
21 Valve Opening in % 13 38 72
22 Outlet Velocity [m/s] 0,91 2,28 2,74
23 Max. admitted Velocity [m/s] 37,56 37,75 37,89
24 Mach
25 Acoustic Cap. Lev. LwA,a [dB(A)] 64 64 60
26 Sound Pres. Lev. LpA,a [dB(A)] 51 50 47
27 Flow Remark
28 Valve Data
29 Valve Style Rotary Plug Valve Valve Type 82.7 R
30 Body Size [inch] DN 3" Body Material 1.0619 / A216 WCC
31 Press. Rating [lbs] PN 300 Plug Material 1.4408
32 End Connections RF Seat Ring Material 1.4404
33 Face to Face [mm] 165 Guide Material 1.4404
34 Selected Valve Coeff. Kvs 70 Cvs 81 Plug/Seat Facing Metallic
35 Seat Diameter [mm] 37,0 Seat Fac. 0,25 Gaskets S.S. / Graphite
36 Leakage Class DIN 60534-4, KL IV G1 Packing PTFE / Graphite
37 Characteristic Equal % Bonnet Standard
38 Noise Reduction Flow Direction FTO
39 Actuator Data
Fail Position Spring to Close
40 Actuator Style Pneumatic Handwheel With
41 Actuator Type R 150v Stroke Time o/c [s] t
42 Spring Range [bar] 0,92 - 2,76 Req. Torque [Nm]Md 103
43 Air Supply [bar] 4 Max. Torque [Nm]Md 892 (100°C)17-4pH
44 Max. Shut Off [bar] dp 21,05 Mounting A
45 Accessories
46 Positioner Type 3730-310 000 004 00000 000 Air Set Type 4708-5452, NPT1/4", 2 gauges
47 Limit Switches Type Piping S.S.
48 Solenoid Valve Type Others
49 Certification/Requirements Remarks
50 Material EN 10204 / 3.1 55
51 Inspection EN 10204 / 3.1 56
52 Others NACE MR0103 57 with magnetic particle test
53 Cust. Std. 58 with hysteresis test
54 Weight kg 59 painting acc. EB005.060 Coating System No.1
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-047
3 Unit Item 36 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 33208 30189 12076
11 Inlet Pressure p1 kg/cm²(g) 8.67 9.52 13.6
12 Dp Pressure dp kg/cm² 2.67 3.52 7.6
13 Inlet Temperature T1 °C 35 35 35
14 Inlet Density rho1 kg/m³ 792.7 792.7 792.7
15 Vapor Pressure pv kg/cm²(a) 0.059 0.059 0.059
16 Critical Pressure pc kg/cm²(a) 24.6 24.6 24.6
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 1.605 1.605 1.605
20 Outlet Velocity w m/s 2.32 2.1 0.842
21 Valve Coeff. Calculated Kv - 23.1 18.3 4.97
22 Relative Travel T % 66.3 58.2 31.8
23 Calculated Noise LA dB (A) 65 72 73
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 16 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 180 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 16 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 180 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 40 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 48 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Stellite® faced 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Stellited 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 175 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.92.1 Item / Tag 36 / FV-047 Page 36 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-048
3 Unit Item 37 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 12185 11077 4431
11 Inlet Pressure p1 kg/cm²(g) 7.76 8.38 11.53
12 Dp Pressure dp kg/cm² 1.76 2.38 5.53
13 Inlet Temperature T1 °C 49.9 49.9 49.9
14 Inlet Density rho1 kg/m³ 810.6 810.6 810.6
15 Vapor Pressure pv kg/cm²(a) 0.125 0.125 0.125
16 Critical Pressure pc kg/cm²(a) 21.8 21.8 21.8
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 2.106 2.106 2.106
20 Outlet Velocity w m/s 3.32 3.02 1.21
21 Valve Coeff. Calculated Kv - 10.4 8.11 2.11
22 Relative Travel T % 83.3 76.9 42.6
23 Calculated Noise LA dB (A) 58 60 70
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 14.41 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 260 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 14.41 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 260 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3291 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 1/2 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Insulating section 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket on metal core 316(L) 96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 20 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 38 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 12 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Stellited 110 Elec. Conn.
58 Seat Material A182 F316 / A182 F316L 111 Ex Approval / Cert. /
59 Cage Material A487 CA6NM Class B/A276 S41500 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.92.1 Item / Tag 37 / FV-048 Page 37 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-049
3 Unit Item 38 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 32621 29655 11862
11 Inlet Pressure p1 kg/cm²(g) 5.39 6.34 9.04
12 Dp Pressure dp kg/cm² 0.39 1.34 4.04
13 Inlet Temperature T1 °C 55 55 55
14 Inlet Density rho1 kg/m³ 833.8 833.8 833.8
15 Vapor Pressure pv kg/cm²(a) 0.159 0.159 0.159
16 Critical Pressure pc kg/cm²(a) 18.5 18.5 18.5
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 2.758 2.758 2.758
20 Outlet Velocity w m/s 2.16 1.97 0.786
21 Valve Coeff. Calculated Kv - 58.1 28.4 6.53
22 Relative Travel T % 86.9 59.9 24.6
23 Calculated Noise LA dB (A) 50 57 64
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 15.7 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 161 °C 79 In NPS 4" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 4" / /
28 Pressure Min 0 kg/cm²(g) Max 15.7 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 161 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 80 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Stellite® faced 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Stellited 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.92.1 Item / Tag 38 / FV-049 Page 38 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-050
3 Unit Item 39 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 5000 2000 500
11 Inlet Pressure p1 kg/cm²(g) 16.2 17.1 19.63
12 Dp Pressure dp kg/cm² 14.7 15.6 17.8
13 Inlet Temperature T1 °C 265 265 265
14 Inlet Density rho1 kg/m³ 725.7 725.7 725.7
15 Vapor Pressure pv kg/cm²(a) 2.578 2.578 2.58
16 Critical Pressure pc kg/cm²(a) 16.6 16.6 16.6
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.043 0.043 0.043
20 Outlet Velocity w m/s 3.9 1.56 0.39
21 Valve Coeff. Calculated Kv - 1.6 0.613 0.141
22 Relative Travel T % 87 62.5 25.9
23 Calculated Noise LA dB (A) 73 67 63
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 24.53 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 317 °C 79 In NPS 2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 2" / /
28 Pressure Min 0 kg/cm²(g) Max 24.53 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 317 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A217 WC9 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support, 96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 2.5 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 12 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 12 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Fully Stellite® faced 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Stellited 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.4 ... 1.2 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.92.1 Item / Tag 39 / FV-050 Page 39 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. FV-051
3 Unit Item 40 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 8737 7103 2841
11 Inlet Pressure p1 kg/cm²(g) 11.43 13.9 18.75
12 Dp Pressure dp kg/cm² 0.43 2.9 7.75
13 Inlet Temperature T1 °C 90 90 90
14 Inlet Density rho1 kg/m³ 722.6 722.6 722.6
15 Vapor Pressure pv kg/cm²(a) 0.71 0.71 0.71
16 Critical Pressure pc kg/cm²(a) 16.6 16.6 16.6
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.455 0.455 0.455
20 Outlet Velocity w m/s 2.67 2.17 0.869
21 Valve Coeff. Calculated Kv - 16.3 4.97 1.21
22 Relative Travel T % 81.8 53.7 25.1
23 Calculated Noise LA dB (A) 44 59 65
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 23.43 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 265 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 23.43 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 265 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 1/2 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A217 WC9 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support, 96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 25 100 Qty. / Switch. Func. /
48 Rated Travel 15 mm 101 Material
49 Seat Bore 38 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 12 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Stellite® faced 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Stellited 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail open 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.2 ... 1 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.92.1 Item / Tag 40 / FV-051 Page 40 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-110
3 Unit Item 41 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Vapor
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 3293 2689 1076
11 Inlet Pressure p1 kg/cm²(g) 6 6.5 7
12 Dp Pressure dp kg/cm² 0.5 1 1.5
13 Inlet Temperature T1 °C 30 30 30
14 Inlet Density rho1 kg/m³ 4.561 4.561 4.561
15 Vapor Pressure pv bar(a)
16 Critical Pressure pc bar(a)
17 Ratio of Specific Heats γ - 1.316 1.316 1.316
18 Compressibility Z -
19 Inlet Viscosity η cP 0.012 0.012 0.012
20 Outlet Velocity w Mach 0.0127 0.0107 0.00444
21 Valve Coeff. Calculated Kv - 74.6 43.5 14.4
22 Relative Travel T % 79.4 58.5 33.6
23 Calculated Noise LA dB (A) 60 70 68
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 8.75 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 55 °C 79 In NPS 6" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 6" / /
28 Pressure Min 0 kg/cm²(g) Max 8.75 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 54.5 mm / 2.9 mm
29 Temperature Min 0 °C Max 55 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3241 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Graphite gasket with metallic support 1.4401/1.4404
96 Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 100 100 Qty. / Switch. Func. /
48 Rated Travel 19 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 10 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A479 316 / A479 316L / A182 F316 / A182 111F316L
Ex Approval / Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 1.4 to 2.6 bar/2.2 ... 2.95 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 41 / PV-110 Page 41 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. TV-124
3 Unit Item 42 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Water
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 900 225 90
11 Inlet Pressure p1 kg/cm²(g) 29 29 29
12 Dp Pressure dp kg/cm² 25.5 25.5 25.5
13 Inlet Temperature T1 °C 80 80 80
14 Inlet Density rho1 kg/m³ 973 973 973
15 Vapor Pressure pv kg/cm²(a) 0.483 0.483 0.483
16 Critical Pressure pc kg/cm²(a) 225 225 225
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.355 0.355 0.355
20 Outlet Velocity w m/s 0.523 0.131 0.0523
21 Valve Coeff. Calculated Kv - 0.182 0.0456 0.0189
22 Relative Travel T % 79.1 50.7 35.9
23 Calculated Noise LA dB (A) 53 43 38
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 36.25 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 180 °C 79 In NPS 2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 2" / /
28 Pressure Min 0 kg/cm²(g) Max 36.25 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 180 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material PTFE 94 Quantity 1
42 Packing Type Standard 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support, 96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 0.4 100 Qty. / Switch. Func. /
48 Rated Travel 7.5 mm 101 Material
49 Seat Bore 12 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 12 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction AC3 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material R30006 / R30016 108 Quantity
56 Stem Material A479 316 / A479 316L 109 Material
57 Seat Facing Stellited 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.8 ... 1.2 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.92.1 Item / Tag 42 / TV-124 Page 42 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-116
3 Unit Item 43 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Steam
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 5968 3100 1240
11 Inlet Pressure p1 kg/cm²(g) 15 15 15
12 Dp Pressure dp kg/cm² 11.5 11.5 11.5
13 Inlet Temperature T1 °C 250 250 250
14 Inlet Density v1 m³/kg 0.145 0.145 0.145
15 Vapor Pressure pv kg/cm²(a)
16 Critical Pressure pc kg/cm²(a)
17 Ratio of Specific Heats γ - 1.3 1.3 1.3
18 Compressibility Z -
19 Inlet Viscosity η cP 0.0179 0.0179 0.0179
20 Outlet Velocity w Mach 0.415 0.202 0.0787
21 Valve Coeff. Calculated Kv - 32.4 16.5 6.54
22 Relative Travel T % 83.9 67.6 46
23 Calculated Noise LA dB (A) 80 74 65
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 18.75 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 6" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 6" / /
28 Pressure Min 0 kg/cm²(g) Max 18.75 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 4 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 47 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 63 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction Flow div. III 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 316 / A479 316L 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. 316L 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 1.9 to 3.3 bar/2.25 ... 3.65 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 43 / PV-116 Page 43 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PV-118
3 Unit Item 44 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 58080 52800 31680
11 Inlet Pressure p1 kg/cm²(g) 7.7 7.7 7.7
12 Dp Pressure dp kg/cm² 0.69 0.69 0.69
13 Inlet Temperature T1 °C 293 25 3.5
14 Inlet Density rho1 kg/m³ 777 777 777
15 Vapor Pressure pv kg/cm²(a) 1.03 1.03 1.03
16 Critical Pressure pc kg/cm²(a) 217.6 217.6 217.6
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 1.3 1.3 1.3
20 Outlet Velocity w m/s 4.13 3.76 2.25
21 Valve Coeff. Calculated Kv - 83.3 75.2 44.2
22 Relative Travel T % 80.4 72.9 44.6
23 Calculated Noise LA dB (A) 57 56 52
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 11.4 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 350 °C 79 In NPS 6" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 6" / /
28 Pressure Min 0 kg/cm²(g) Max 11.4 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 350 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE ISO15156 or MR0103-2007/ISO17495-1 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 100 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 80 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Linear 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 XM-19-H 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 1.9 to 3.3 bar/2.25 ... 3.65 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 44 / PV-118 Page 44 of 48
01 Quotation-No. : 6027081 Customer : Samson Egypt
02 Name : eh / tsch Project : Petrojet Project

03 Pos.-No. : 45 Rev. 2 Process Fluid : Hydrocarbon mixed 15.12.2020

04 TAG - No. : PV-008 Upstream Conditions : 2 ph
05 Process and Medium Data min norm max
06 Flow Rate [kg/h] W
07 Inlet Pressure [bara] p1
08 Outlet Pressure [bara] p2
09 Inlet Temperature [°C] t1
10 Density [kg/m³] rho
11 Vapor Pressure [bara] pv
12 Critical Pressure [bara] pc
13 Viscosity [mPas] eta
14 Ratio. Spc. Heat [cp/cv]
15 Compressibility Factor
16 Flashing [%]
17 Pipeline
18 Line size [mm] Da * s / PN (In) 406,4 x 9,53 / std Da * s / PN (Out) 406,4 x 9,53 / std
19 Results
20 Calculated Valve Coeff. [Kv] liq 114,44 460,43 642,29
Calculated Valve Coeff. [Kv] gas 66,31 203,58 439,51
Calculated Valve Coeff. [Kv] total 244,01 896,41 1.460,43
21 Valve Opening in % 16 29 68
22 Outlet Velocity [m/s] 3,51 6,19 6,34
23 Max. admitted Velocity [m/s]
24 Mach
25 Acoustic Cap. Lev. LwA,a [dB(A)]
26 Sound Pres. Lev. LpA,a [dB(A)] total 77 73 59
27 Flow Remark
28 Valve Data
29 Valve Style Rotary Plug Valve Valve Type 82.7 M
30 Body Size [inch] DN 12" Body Material 1.0619 / A216 WCC
31 Press. Rating [lbs] PN 150 Plug Material 1.4408 stel 6
32 End Connections RF Seat Ring Material 1.4404 stel 6
33 Face to Face [mm] 338 Guide Material 1.4404
34 Selected Valve Coeff. Kvs 2100 Cvs 2428 Plug/Seat Facing Metallic
35 Seat Diameter [mm] 210,0 Seat Fac. 1 Gaskets S.S. / Graphite
36 Leakage Class DIN 60534-4, KL IV G1 Packing PTFE / Graphite
37 Characteristic Equal % Bonnet Standard
38 Noise Reduction Flow Direction FTC
39 Actuator Data
Fail Position Spring to Open
40 Actuator Style Pneumatic Handwheel Handgear
41 Actuator Type MD 700/75v Stroke Time o/c [s] t
42 Spring Range [bar] 0,69 - 2,1 Req. Torque [Nm]Md 1896
43 Air Supply [bar] 4,5 Max. Torque [Nm]Md 4691 (100°C)17-4pH
44 Max. Shut Off [bar] dp 22,5 Mounting B
45 Accessories
46 Positioner Type 3730-310 000 004 00000 000 Air Set Type 4708-4572, NPT1/2", 1 gauge
47 Limit Switches Type Piping S.S.
48 Solenoid Valve EN 10204 / 3.1Type Others Booster, SMC EIL 100
49 Certification/Requirements Remarks
50 Material EN 10204 / 3.1 55 for flashing we recommend FTC
51 Inspection EN 10204 / 3.1 56
52 Others NACE MR0103 57 with magnetic particle test
53 Cust. Std. 58 with hysteresis test
54 Weight kg 59 painting acc. EB005.060 Coating System No.3

C:\Users\thomas.schall\Desktop\Angebote\6027081_Samson Egypt_Petrojet Project\Rev.3\ \ 6027081_Spec_Rev.3 - P 6 2ph

01 Quotation-No. : 6027081 Customer : Samson Egypt
02 Name : tsch Project : Petrojet Project

03 Pos.-No. : 45 liq Rev. 3 Process Fluid : Hydrocarbon mixed 03.03.2021

04 TAG - No. : PV-008 Upstream Conditions : Liquid
05 Process and Medium Data min norm max
06 Flow Rate [kg/h] W 56.056 140.139 168.167
07 Inlet Pressure [bara] p1 4,370 2,900 2,300
08 Outlet Pressure [bara] p2 2,200 2,200 2,190
09 Inlet Temperature [°C] t1 120,00 120,00 120,00
10 Density [kg/m³] rho 668,900 668,900 668,900
11 Vapor Pressure [bara] pv 4,000 2,890 2,290
12 Critical Pressure [bara] pc 40,2 40,2 40,2
13 Viscosity [mPas] eta 0,43 0,43 0,43
14 Ratio. Spc. Heat [cp/cv]
15 Compressibility Factor
16 Flashing [%] 0,10 0,10 0,10
17 Pipeline
18 Line size [mm] Da * s / PN (In) 406,4 x 9,53 / std Da * s / PN (Out) 406,4 x 9,53 / std
19 Results
20 Calculated Valve Coeff. [Kv] 114,44 460,43 642,29
21 Valve Opening in % 8 27 36
22 Outlet Velocity [m/s] 0,45 1,11 1,49
23 Max. admitted Velocity [m/s]
24 Mach
25 Acoustic Cap. Lev. LwA,a [dB(A)] 73 72 65
26 Sound Pres. Lev. LpA,a [dB(A)] 59 58 51
27 Flow Remark flashing flashing flashing
28 Valve Data
29 Valve Style Rotary Plug Valve Valve Type 82.7 M
30 Body Size [inch] DN 12" Body Material 1.0619 / A216 WCC
31 Press. Rating [lbs] PN 150 Plug Material 1.4408 stel 6
32 End Connections RF Seat Ring Material 1.4404 stel 6
33 Face to Face [mm] 338 Guide Material 1.4404
34 Selected Valve Coeff. Kvs 2100 Cvs 2428 Plug/Seat Facing Metallic
35 Seat Diameter [mm] 210,0 Seat Fac. 1 Gaskets S.S. / Graphite
36 Leakage Class DIN 60534-4, KL IV G1 Packing PTFE / Graphite
37 Characteristic Equal % Bonnet Standard
38 Noise Reduction Flow Direction FTC
39 Actuator Data
Fail Position Spring to Open
40 Actuator Style Pneumatic Handwheel Handgear
41 Actuator Type MZ 700/75v Stroke Time o/c [s] t
42 Spring Range [bar] 0,69 - 2,1 Req. Torque [Nm]Md 1896
43 Air Supply [bar] 4,5 Max. Torque [Nm]Md 4691 (100°C)17-4pH
44 Max. Shut Off [bar] dp 22,5 Mounting B
45 Accessories
46 Positioner Type 3730-310 000 004 00000 000 Air Set Type 4708-4572, NPT1/2", 1 gauge
47 Limit Switches Type Piping S.S.
48 Solenoid Valve Type Others Booster, SMC EIL 100
49 Certification/Requirements Remarks
50 Material EN 10204 / 3.1 55 for flashing we recommend FTC
51 Inspection EN 10204 / 3.1 56
52 Others NACE MR0103 57 with magnetic particle test
53 Cust. Std. 58 with hysteresis test
54 Weight kg 59 painting acc. EB005.060 Coating System No.3
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. TV-127
3 Unit Item 46 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Water
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 225 100 25
11 Inlet Pressure p1 kg/cm²(g) 29 29 29
12 Dp Pressure dp kg/cm² 25.5 14 25.5
13 Inlet Temperature T1 °C 80 80 80
14 Inlet Density rho1 kg/m³ 973 973 973
15 Vapor Pressure pv kg/cm²(a) 0.483 0.483 0.483
16 Critical Pressure pc kg/cm²(a) 225 225 225
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 0.355 0.355 0.355
20 Outlet Velocity w m/s 0.131 0.0582
21 Valve Coeff. Calculated Kv - 0.0456 0.0281 0.00524
22 Relative Travel T % 50.7 42.2
23 Calculated Noise LA dB (A) 43 35
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 36.25 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 180 °C 79 In NPS 2" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 2" / /
28 Pressure Min 0 kg/cm²(g) Max 36.25 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 180 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material PTFE 94 Quantity 1
42 Packing Type Standard 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support, 96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 0.4 100 Qty. / Switch. Func. /
48 Rated Travel 7.5 mm 101 Material
49 Seat Bore 12 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 12 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction AC3 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material R30006 / R30016 108 Quantity
56 Stem Material A479 316 / A479 316L 109 Material
57 Seat Facing Stellited 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.2 to 1.0 bar/0.8 ... 1.2 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.92.1 Item / Tag 46 / TV-127 Page 46 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. TV-128
3 Unit Item 47 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium Steam
8 Phase vapor Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 880 800 470
11 Inlet Pressure p1 kg/cm²(g) 2.8 2.8 2.8
12 Dp Pressure dp kg/cm² 1.2 1.3 1.63
13 Inlet Temperature T1 °C 148 148 148
14 Inlet Density v1 m³/kg 0.5 0.5 0.5
15 Vapor Pressure pv kg/cm²(a)
16 Critical Pressure pc kg/cm²(a)
17 Ratio of Specific Heats γ - 1.31 1.31 1.31
18 Compressibility Z -
19 Inlet Viscosity η cP 0.014 0.014 0.014
20 Outlet Velocity w Mach 0.0717 0.0678 0.0459
21 Valve Coeff. Calculated Kv - 21.2 18.8 10.3
22 Relative Travel T % 82.4 79.5 64.5
23 Calculated Noise LA dB (A) 78 77 73
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 3.5 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 180 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 3.5 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 6.3 mm
29 Temperature Min 0 °C Max 180 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 3 87 Material Aluminium
35 Rating Class 150 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material Graphite 94 Quantity 1
42 Packing Type HT 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support,
96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 40 100 Qty. / Switch. Func. /
48 Rated Travel 30 mm 101 Material
49 Seat Bore 50 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 16 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction - 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Metal 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 316 / A479 316L 109 Material
57 Seat Facing Metallic 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 355 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/0.8 ... 2.4 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0976 / 1.0982 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 47 / TV-128 Page 47 of 48
<#auto page breaks>
SAMSON VALVE SPECIFICATION

1 Customer
2 Project No.
Tag No. PCV-130
3 Unit Item 48 Status
4 PID Quot. No. Revision
5 Line No. Order No. Date 11.03.2021
6 PROCESS DATA
7 Service Medium HC Condensate
8 Phase liquid Medium Cust.
9 Unit Case 1 Case 2 Case 3
10 Flow Rate W kg/h 20000 5000 2000
11 Inlet Pressure p1 kg/cm²(g) 29 29 29
12 Dp Pressure dp kg/cm² 25.5 25.5 25.5
13 Inlet Temperature T1 °C 80 80 80
14 Inlet Density rho1 kg/m³ 1015 1015 1015
15 Vapor Pressure pv kg/cm²(a) 2 2 2
16 Critical Pressure pc kg/cm²(a) 225 225 225
17 Ratio of Specific Heats γ -
18 Compressibility Z -
19 Inlet Viscosity η cP 1.02 1.02 1.02
20 Outlet Velocity w m/s 4.36 1.09 0.436
21 Valve Coeff. Calculated Kv - 3.97 0.992 0.397
22 Relative Travel T % 86.7 56.3 34.4
23 Calculated Noise LA dB (A) 87 69 54
24 DESIGN 77 LINE
25 Shut-Off Pressure Min kg/cm²(g) Max 36.25 kg/cm²(g) 78 Size / Rating / Pipe Class
26 t1max Max 180.5 °C 79 In NPS 3" / /
27 Supply Pressure Min 4 bar Max 7 bar 80 Out NPS 3" / /
28 Pressure Min 0 kg/cm²(g) Max 36.25 kg/cm²(g) 81 Pipe Inner Dia. / Wallthickness 206.5 mm / 3.9 mm
29 Temperature Min 0 °C Max 180.5 °C 82 Insu. none
30 Ambient Temp. Min 0 °C Max 50 °C 83 POSITIONER
31 VALVE BODY / BONNET 84 Manufacturer / Type SAMSON / TROVIS 3730-3
32 Manufacturer / Type SAMSON / 3251 85 Device Type
33 Style Globe 86 Quantity 1
34 Nominal Size NPS 1 1/2 87 Material Aluminium
35 Rating Class 300 88 Elec. / Pneu. Conn. / Connection block 1/4 NPT (1402-0901)
36 Body Material A216 WCC 89 Input Sig. / Commu. /
37 Connection In/Out flanges 90 Ex Approval / Cert. II 2G Ex ia IIC T4/T6 Gb, II 2D Ex ia IIIC T85°C Db / AT
38 Connection In/Out RF (Ra 3.2 to 6.3), ASME B16.5 91 AIR SET
39 Bonnet Type Standard 92 Manufacturer / Type SAMSON FRANCE / Type 4708
40 Bellow Material - 93 Device Type 4708-11 Hooked-up as required
41 Packing Material PTFE 94 Quantity 1
42 Packing Type Standard 95 Mat. / Pneu. Conn. Aluminium & Plastic / 1/4 NPT
43 Body Gasket Corrugated gasket, 1.4401/1.4404 support, 96 graphite
Gauges / Filter 1 Gauge St. St. / brass / 20 µm
44 Flow Direction FTO (flow-to-open) 97 SOLENOID VALVE
45 NACE - 98 Manufacturer / Type /
46 TRIM 99 Device Type
47 Valve Coefficient Kvs 6.3 100 Qty. / Switch. Func. /
48 Rated Travel 7.5 mm 101 Material
49 Seat Bore 31 mm 102 Elec. / Pneu. Conn. /
50 Stem Ø 12 mm 103 Power Supply
51 Characteristic Equal percentage 104 Ex Approval / Cert. /
52 Noise Reduction AC3 105 LIMIT SWITCH
53 Balanced - 106 Manufacturer / Type /
54 Plug Facing Stellite® faced 107 Device Type
55 Plug Material A351 CF3M/A182 F316/A182 F316L/A479 108316/A479
Quantity316L
56 Stem Material A479 316 / A479 316L 109 Material
57 Seat Facing Stellited 110 Elec. Conn.
58 Seat Material A351 CF3M / A479 316 / A479 316L / A182 111F316
Ex Approval
/ A182 F316L
/ Cert. /
59 Cage Material 112 Contacts
60 Flow Divider Mat. - 113 Function
61 Leakage Class IV 114 BOOSTER
62 ACTUATOR 115 Manufacturer / Type /
63 Manufacturer / Type SAMSON / Type 3277 116 Device Type
64 Size 350 cm² 117 Quantity
65 Fail Action Fail close 118 Mat. / Pneu. Conn. /
66 Bench/Oper. Range 0.4 to 2.0 bar/1.6 ... 2.4 bar 119 ATTENUATION PLATES
67 Actuator Body Mat. 1.0332 / 1.0335 120 Type
68 Actuator Style Pneumatic 121 Size In / Out
69 Stroke Limit. - 122 Rating
70 Membrane Material NBR 123 Plates Material Qty.
71 Handwheel Top 124 REMARKS
72 Set Point / -Range / 125
73 126
74 127
75 Rev. Date Description Prpd. Chd. App. 128
76 11.03.2021 Mustafa Elsokkary 129
c-SAM Version 9.5.91.1 Item / Tag 48 / PCV-130 Page 48 of 48