You are filling the Application as per ISO/IEC 17025: 2017 under catgeory for First Accreditation

Testing Laboratory Details

Terminate this Application

Laboratory Details (LabDetails)Discipline Details (DisciplineGroup)

Scope Of Accreditation (ScopeOfAccreditation)
Organization (Organisation) Equipment (Equipment)

Reference Materials (ReferenceMaterials)

Quality Control Activity (QualityControlActivity)
Enclosure List (EnclosureList)

Scope of Accreditation

Filling the scope of accreditation is one time activity and may appear time
NOTE: Laboratory is required to fill the entire details for scope of accreditation wit

Refer User Manual for more details. (../assets/Manual/Testing.pdf)

Click Here To Add Scope

Proposed Scope of Accreditation View Scopes

Filter: Discipline --Select Discipline-- Filter: Group

 12 / 14 

Range of
S Discipline Product/Material Specific Test Testing/Limit of (±)MU Test Performed
elete No. Name Group Sub Group of test Performed Test method detection @Value at

1101 Electronics Domestic Others Audio/Video Steady force (Annex IEC / EN 62368-1: Qualitative PermanentFacility
electronic Information And T.2,Annex T.3, Annex T.4, 2018 :Qualitative
appliances Communication Annex T.5)
& Technology
accessories Equipment
 Range of
S
1102 Discipline
Electronics Domestic Others Product/Material
Audio/Video Specific Test
Stress relief (Annex T.8) IEC / EN 62368-1: Testing/Limit
Qualitative of (±)MU Test Performed
PermanentFacility
elete No. Name Group
electronic Sub Group of test
Information And Performed Test
2018 method detection
:Qualitative @Value at
appliances Communication
& Technology
accessories Equipment

1103 Electronics Domestic Others Power Energy Star - Energy IEC 62623: 2012 Qualitative :AC 1 V PermanentFacility
electronic Measurement in Star Program to 600 V DC 1 V to
appliances Off Mode, Sleep requirements 600 V AC 0.001 A
& Mode, and Idle to 20 A DC 0.001
accessories state. A to 10 A 0.05W to
4.8 kW 0.005
cd/m² to 6000
cd/m²

1104 Electronics IT Others Information Abnormal operating and IS 13252-1:2010+A1 20 °C to 600 °C 0.54 °C PermanentFacility
Equipment Technology fault conditions (Cl.5.3) 2013+A2: 2015 @ 43.0
Equipments °C

1105 Electronics IT Others Information Abnormal operating and IEC60950-1: 2005 20 °C to 600 °C 0.54 °C PermanentFacility
Equipment Technology fault conditions (Cl.5.3) @ 43.0
Equipments °C

1106 Electronics IT Others Information Clearances, creepage IS 13252-1:2010+A1 0 mm to 150 mm 0.0554 PermanentFacility
Equipment Technology distances and distances 2013+A2: 2015 mm @
Equipments through insulation 4.76 mm
(Cl.2.10)

1107 Electronics IT Others Information Clearances, creepage IEC60950- 0 mm to 150 mm 0.0554 PermanentFacility
Equipment Technology distances and distances 1:2005+A1:2009+A2: mm @
Equipments through insulation 2013 4.76 mm
(Cl.2.10)

1108 Electronics IT Others Information Components (Cl.1.5) IS 13252-1:2010+A1 Qualitative :Data PermanentFacility
Equipment Technology 2013+A2: 2015 verification
Equipments

1109 Electronics IT Others Information Components (Cl.1.5) IEC60950- Qualitative :Data PermanentFacility
Equipment Technology 1:2005+A1:2009+A2: verification
Equipments 2013

1110 Electronics IT Others Information Connection to a main IS 13252-1:2010+A1 Qualitative PermanentFacility

Equipment Technology supply (Cl.3.2) 2013+A2: 2015 :Jointed test probe
Equipments (Test Probe-B) 0-
150mm
30N,60N,100N
0°-60°

1111 Electronics IT Others Information Connection to a main IEC60950- Qualitative PermanentFacility

Equipment Technology supply (Cl.3.2) 1:2005+A1:2009+A2: :Jointed test probe
Equipments 2013 (Test Probe-B) 0-
150mm
30N,60N,100N
0°-60°

1112 Electronics IT Others Information Design & construction IS 13252-1:2010+A1 Qualitative :0- PermanentFacility
Equipment Technology (Cl.4.3) 2013+A2:: 2015 250N,0.1N
Equipments
 Range of
S
1113 Discipline
Electronics IT Others Product/Material
Information Specific Test
Design & construction IEC60950- Testing/Limit
Qualitative :0- of (±)MU Test Performed
PermanentFacility
elete No. Name Group
Equipment Sub Group of test
Technology Performed
(Cl.4.3) Test method
1:2005+A1:2009+A2: detection
250N,0.1N @Value at
Equipments 2013

1114 Electronics IT Others Information Disconnection from the IS 13252-1:2010+A1 Qualitative :Visual PermanentFacility
Equipment Technology mains supply(Cl.3.4) 2013+A2: 2015 inspection
Equipments

1115 Electronics IT Others Information Disconnection from the IEC60950- Qualitative :Visual PermanentFacility
Equipment Technology mains supply(Cl.3.4) 1:2005+A1:2009+A2: inspection
Equipments 2013

1116 Electronics IT Others Information Electric strength (Cl.5.2) IS 13252-1:2010+A1 Qualitative :0- PermanentFacility
Equipment Technology 2013+A2: 2015 6.5KV, 0.01KV
Equipments

1117 Electronics IT Others Information Electric strength (Cl.5.2) IEC60950- Qualitative :0- PermanentFacility
Equipment Technology 1:2005+A1:2009+A2: 6.5KV, 0.01KV
Equipments 2013

1118 Electronics IT Others Information Electrical Insulation IS 13252-1:2010+A1 Qualitative :20. PermanentFacility
Equipment Technology (Cl.2.9) 2013+A2: 2015 50°C Humidity
Equipments 96%Rh 0-6.5 KV,
0.01KV
2megaohm-
100X106megaohm

1119 Electronics IT Others Information Electrical Insulation IEC60950- Qualitative :20. PermanentFacility
Equipment Technology (Cl.2.9) 1:2005+A1:2009+A2: 50°C Humidity
Equipments 2013 96%Rh 0-6.5 KV,
0.01KV
2megaohm-
100X106megaohm

1120 Electronics IT Others Information Household and IS 13252-1:2010+A1 Qualitative PermanentFacility

Equipment Technology home/office 2013+A2: 2015 :Jointed test probe
Equipments document/media (Test Probe-B)
shredders (Annex EE) Wedge probe

1121 Electronics IT Others Information Household and IEC 60950-1: 2005 Qualitative PermanentFacility
Equipment Technology home/office :Jointed test probe
Equipments document/media (Test Probe-B)
shredders (Annex EE) Wedge probe

1122 Electronics IT Others Information Insulation between IS 13252-1:2010+A1 Qualitative :0.10- PermanentFacility
Equipment Technology primary circuits and cable 2013+A2: 2015 6.5KV, Surge
Equipments distribution systems generator 0.1-
(Cl.7.4) 10KV, Impulse
Test Apparatus
0.1-10KV
(1.2/50µS) &0.1-
10KV (10/700 µS)
 Range of
S
1123 Discipline
Electronics IT Others Product/Material
Information Specific
Insulation Test
between IEC 60950-1: 2005 Testing/Limit of
Qualitative :0.10- (±)MU Test Performed
PermanentFacility
elete No. Name Group
Equipment Sub Group of test
Technology Performed
primary circuits and cable Test method detection
6.5KV, Surge @Value at
Equipments distribution systems generator 0.1-
(Cl.7.4) 10KV, Impulse
Test Apparatus
0.1-10KV
(1.2/50µS) &0.1-
10KV (10/700 µS)

1124 Electronics IT Others Information Interconnection of IS 13252-1:2010+A1 Qualitative :0.1- PermanentFacility

Equipment Technology equipment (Cl.3.5) 2013+A2: 2015 350 V, 0.1- 5000
Equipments W, 1200 Ohm,
0.01-6.5 kV

1125 Electronics IT Others Information Interconnection of IEC60950- Qualitative :0.1- PermanentFacility

Equipment Technology equipment (Cl.3.5) 1:2005+A1:2009+A2: 350 V, 0.1- 5000
Equipments 2013 W, 1200 Ohm,
0.01-6.5 kV

1126 Electronics IT Others Information Limited current circuits IS 13252-1:2010+A1 Others :Leakage 1.15 µA PermanentFacility
Equipment Technology (Cl.2.4) 2013+A2: 2015 current tester 0- @ 47
Equipments 20A 2000ohm, 0- µA
1000V

1127 Electronics IT Others Information Limited current circuits IEC60950- Others :Leakage 1.15 µA PermanentFacility
Equipment Technology (Cl.2.4) 1:2005+A1:2009+A2: current tester 0- @ 47
Equipments 2013 20A 2000ohm, 0- µA
1000V

1128 Electronics IT Others Information limited power sources IS 13252-1:2010+A1 Others :0-150V,0- 0.0435 PermanentFacility
Equipment Technology (Cl.2.5) 2013+A2: 2015 20A VA @
Equipments 2.9 VA

1129 Electronics IT Others Information limited power sources IEC60950- Others :0-150V,0- 0.0435 PermanentFacility
Equipment Technology (Cl.2.5) 1:2005+A1:2009+A2: 20A VA @
Equipments 2013 2.9 VA

1130 Electronics IT Others Information Limits of TNV circuits IS 13252-1:2010+A1 Qualitative :5000? PermanentFacility
Equipment Technology (Cl.2.3) 2013+A2: 2015 ±2% 60V ,
Equipments 100MHz, 0-6.5KV

1131 Electronics IT Others Information Limits of TNV circuits IS 13252-1:2010+A1 Qualitative :5000? PermanentFacility
Equipment Technology (Cl.2.3) 2013+A2: 2015 ±2% 60V ,
Equipments 100MHz, 0-6.5KV

1132 Electronics IT Others Information Limits of TNV circuits IEC60950- Qualitative :5000? PermanentFacility
Equipment Technology (Cl.2.3) 1:2005+A1:2009+A2: ±2% 60V ,
Equipments 2013 100MHz, 0-6.5KV

1133 Electronics IT Others Information Marking and instructions IS 13252-1:2010+A1 Qualitative :Visual PermanentFacility
Equipment Technology (Cl. 1.7) 2013+A2: 2015 inspection
Equipments

1134 Electronics IT Others Information Marking and instructions IEC60950- Qualitative :Visual PermanentFacility
Equipment Technology (Cl. 1.7) 1:2005+A1:2009+A2: inspection
Equipments 2013
 Range of
S
1135 Discipline
Electronics IT Others Product/Material
Information Specific Test
Mechanical Strength IS 13252-1:2010+A1 Testing/Limit
Qualitative :0- of (±)MU Test Performed
PermanentFacility
elete No. Name Group
Equipment Sub Group of test
Technology Performed
(Cl.4.2) Test method
2013+A2: 2015 detection
250N, 0.1N, 500g @Value at
Equipments weight 50mm dia.
13mm, hardwood
on 19mm on
20mm, 20-
600°C,1°C

1136 Electronics IT Others Information Mechanical Strength IEC60950- Qualitative :0- PermanentFacility
Equipment Technology (Cl.4.2) 1:2005+A1:2009+A2: 250N, 0.1N, 500g
Equipments 2013 weight 50mm dia.
13mm, hardwood
on 19mm on
20mm, 20-
600°C,1°C

1137 Electronics IT Others Information Motor tests under IS 13252-1:2010+A1 Others :20 °C to 0.54 °C PermanentFacility
Equipment Technology abnormal conditions 2013+A2: 2015 600 °C, 0.10- @ 43.0
Equipments (Annex B) 6.5KV °C

1138 Electronics IT Others Information Motor tests under IEC 60950-1: 2005 Others :20 °C to 0.54 °C PermanentFacility
Equipment Technology abnormal conditions 600 °C, 0.10- @ 43.0
Equipments (Annex B) 6.5KV °C

1139 Electronics IT Others Information Opening in enclosure IS 13252-1:2010+A1 Qualitative :0- PermanentFacility
Equipment Technology (Cl.4.6) 2013+A2: 2015 150mm,0.01mm 0-
Equipments 25mm,0.001mm
Probe-1mm dia.
13mm length

1140 Electronics IT Others Information Opening in enclosure IEC60950- Qualitative :0- PermanentFacility
Equipment Technology (Cl.4.6) 1:2005+A1:2009+A2: 150mm,0.01mm 0-
Equipments 2013 25mm,0.001mm
Probe-1mm dia.
13mm length

1141 Electronics IT Others Information Overcurrent and earth IS 13252-1:2010+A1 Qualitative :Visual PermanentFacility
Equipment Technology fault protection in primary 2013+A2: 2015 inspection
Equipments circuits (Cl.2.7)

1142 Electronics IT Others Information Overcurrent and earth IEC60950- Qualitative :Visual PermanentFacility
Equipment Technology fault protection in primary 1:2005+A1:2009+A2: inspection
Equipments circuits (Cl.2.7) 2013

1143 Electronics IT Others Information Power interface (Cl. 1.6) IS 13252-1:2010+A1 0 A to 20 A 0.59 A PermanentFacility
Equipment Technology 2013+A2: 2015: @ 3.54
Equipments 2015 A

1144 Electronics IT Others Information Power interface (Cl. 1.6) IEC60950- 0 A to 20 A 0.59 A PermanentFacility
Equipment Technology 1:2005+A1:2009+A2: @ 3.54
Equipments 2013 A

1145 Electronics IT Others Information Protection against IS 13252-1:2010+A1 Qualitative :Test PermanentFacility
Equipment Technology hazardous moving parts 2013+A2: 2015 finger Fig-2-A
Equipments (Cl. 4.4)
 Range of
S
1146 Discipline
Electronics IT Others Product/Material
Information Specific
ProtectionTest
against IEC60950- Testing/Limit
Qualitative :Testof (±)MU Test Performed
PermanentFacility
elete No. Name Group
Equipment Sub Group of test
Technology Performedmoving parts
hazardous Test method
1:2005+A1:2009+A2: detection
finger Fig-2-A @Value at
Equipments (Cl. 4.4) 2013

1147 Electronics IT Others Information Protection from Electric IS 13252-1:2010+A1 Qualitative :Test PermanentFacility
Equipment Technology shock and energy 2013+A2: 2015 finger 2A,2B, 2C
Equipments hazards (Cl.2.1) 0-150mm,0.01mm
0- 25mm,0.001mm
60V/60A/300W 0-
1000V DC,0.1V 0-
750V AC,0.1V

1148 Electronics IT Others Information Protection from Electric IEC60950- Qualitative :Test PermanentFacility
Equipment Technology shock and energy 1:2005+A1:2009+A2: finger 2A,2B, 2C
Equipments hazards (Cl.2.1) 2013 0-150mm,0.01mm
0- 25mm,0.001mm
60V/60A/300W 0-
1000V DC,0.1V 0-
750V AC,0.1V

1149 Electronics IT Others Information Protection of cable IS 13252-1:2010+A1 Qualitative :Test PermanentFacility
Equipment Technology distribution system 2013+A2: 2015 finger 2A,2B, 2C
Equipments service person, and 0- 150mm,0.01mm
users of other equipment 0- 25mm,0.001mm
connected to the system, 60V/60A/300W 0-
from hazardous voltages 1000V DC,0.1V 0-
in the equipment (Cl.7.2) 750V AC,0.1V

1150 Electronics IT Others Information Protection of cable IEC 60950-1: 2005 Qualitative :Test PermanentFacility
Equipment Technology distribution system finger 2A,2B, 2C
Equipments service person, and 0- 150mm,0.01mm
users of other equipment 0- 25mm,0.001mm
connected to the system, 60V/60A/300W 0-
from hazardous voltages 1000V DC,0.1V 0-
in the equipment (Cl.7.2) 750V AC,0.1V

1151 Electronics IT Others Information Protection of equipment IS 13252-1:2010+A1 Qualitative :0.1- PermanentFacility
Equipment Technology users from over voltages 2013+A2: 2015 6.5KV,0.01KV 0.1-
Equipments on telecommunication 10KV (1.2/50µSec.
networks (Cl.6.2) & 10/700 µSec.) 1-
100 X 106
megaohm

1152 Electronics IT Others Information Protection of equipment IEC60950-1: 2005 Qualitative :0.1- PermanentFacility
Equipment Technology users from over voltages 6.5KV,0.01KV 0.1-
Equipments on telecommunication 10KV (1.2/50µSec.
networks (Cl.6.2) & 10/700 µSec.) 1-
100 X 106
megaohm

1153 Electronics IT Others Information Protection of equipment IS 13252-1:2010+A1 Qualitative :0- PermanentFacility
Equipment Technology users from over voltages 2013+A2: 2015 6.5KV, 5000ohm
Equipments on the cable distribution Telecom test probe
system (Cl.7.3) Test Probe-B
 Range of
S
1154 Discipline
Electronics IT Others Product/Material
Information Specific
ProtectionTest
of equipment IEC 60950-1: 2005 Testing/Limit
Qualitative :0- of (±)MU Test Performed
PermanentFacility
elete No. Name Group
Equipment Sub Group of test
Technology Performed
users from over voltages Test method detection
6.5KV, 5000ohm @Value at
Equipments on the cable distribution Telecom test probe
system (Cl.7.3) Test Probe-B

1155 Electronics IT Others Information Protection of IS: 13252- Others :0.1KV- 0.0021 PermanentFacility
Equipment Technology telecommunication 1:2010+A1 2013+A2: 6.5KV 5000ohm mA @
Equipments network service persons, 2015 1µA to 10 mA 0.14 mA
and users of other
equipment connected to
the network, from
hazards in the equipment
(Cl.6.1)

1156 Electronics IT Others Information Protection of IEC60950-1: 2005 Others :0.1KV- 0.0021 PermanentFacility
Equipment Technology telecommunication 6.5KV 5000ohm mA @
Equipments network service persons, 1µA to 10 mA 0.14 mA
and users of other
equipment connected to
the network, from
hazards in the equipment
(Cl.6.1)

1157 Electronics IT Others Information Protection of the IS 13252-1:2010+A1 Qualitative :0 A to PermanentFacility

Equipment Technology Telecommunication 2013+A2: 2015 30 A
Equipments wiring system from
overheating (Cl.6.3)

1158 Electronics IT Others Information Protection of the IEC 60950-1: 2005 Qualitative :0 A to PermanentFacility
Equipment Technology Telecommunication 30 A
Equipments wiring system from
overheating (Cl.6.3)

1159 Electronics IT Others Information Provision for Earthing & IS 13252-1:2010+A1 Others :0-12V, 0- 0.08 PermanentFacility
Equipment Technology Bonding(Cl.2.6) 2013+A2: 2015 60 Amp ohm @
Equipments 0.022
ohm

1160 Electronics IT Others Information Provision for Earthing & IEC60950- Others :0-12V, 0- 0.08 PermanentFacility
Equipment Technology Bonding(Cl.2.6) 1:2005+A1:2009+A2: 60 Amp ohm @
Equipments 2013 0.022
ohm

1161 Electronics IT Others Information Requirements for the IS 13252-1:2010+A1 Others :0-150mm 0.0554 PermanentFacility
Equipment Technology mounting means of rack- 2013+A2: 2015 7kg,25kg mm @
Equipments mounted equipment 4.76 mm
(Annex DD)

1162 Electronics IT Others Information Requirements for the IEC 60950-1: 2005 Others :0-150mm 0.0554 PermanentFacility
Equipment Technology mounting means of rack- 7kg,25kg mm @
Equipments mounted equipment 4.76 mm
(Annex DD)

1163 Electronics IT Others Information Resistance to fire(Cl.4.7) IS 13252-1:2010+A1 Qualitative :0- PermanentFacility
Equipment Technology 2013+A2: 2015 1200°C, 1°C
Equipments
 Range of
S
1164 Discipline
Electronics IT Others Product/Material
Information Specific Test
Resistance to fire(Cl.4.7) IEC60950- Testing/Limit
Qualitative :0- of (±)MU Test Performed
PermanentFacility
elete No. Name Group
Equipment Sub Group of test
Technology Performed Test method
1:2005+A1:2009+A2: detection
1200°C, 1°C @Value at
Equipments 2013

1165 Electronics IT Others Information Safety interlocks (Cl.2.8) IS 13252-1:2010+A1 Qualitative :0.1- PermanentFacility
Equipment Technology 2013+A2: 2015 99.9 V, Test Probe
Equipments B, 0.1-5000V, 1-
100000 Cycles,
0.1- 350 V, 0.1-
500 N

1166 Electronics IT Others Information Safety interlocks (Cl.2.8) IEC60950- Qualitative :0.1- PermanentFacility
Equipment Technology 1:2005+A1:2009+A2: 99.9 V, Test Probe
Equipments 2013 B, 0.1-5000V, 1-
100000 Cycles,
0.1- 350 V, 0.1-
500 N

1167 Electronics IT Others Information SELV circuits (Cl. 2.2) IEC60950- Qualitative :0- PermanentFacility
Equipment Technology 1:2005+A1:2009+A2: 1000VDC, 0.1V 0-
Equipments 2013 750V AC,0.1V

1168 Electronics IT Others Information SELV circuits (Cl. 2.2) IS 13252-1:2010+A1 Qualitative :0- PermanentFacility
Equipment Technology 2013+A2: 2015 1000VDC, 0.1V 0-
Equipments 750V AC,0.1V

1169 Electronics IT Others Information Stability (Cl. 4.1) IS 13252-1:2010+A1 Qualitative :0- PermanentFacility
Equipment Technology 2013+A2: 2015 60°,1° 0-300N,
Equipments 0.1N

1170 Electronics IT Others Information Stability (Cl. 4.1) IEC60950- Qualitative :0- PermanentFacility
Equipment Technology 1:2005+A1:2009+A2: 60°,1° 0-300N,
Equipments 2013 0.1N

1171 Electronics IT Others Information Thermal Requirements IS 13252-1:2010+A1 Qualitative :20- PermanentFacility
Equipment Technology (Cl.4.5) 2013+A2: 2015 600°C,1°C 20N
Equipments

1172 Electronics IT Others Information Thermal Requirements IEC60950- Qualitative :20- PermanentFacility
Equipment Technology (Cl.4.5) 1:2005+A1:2009+A2: 600°C,1°C 20N
Equipments 2013

1173 Electronics IT Others Information Touch current & IS 13252-1:2010+A1 0 mA to 10 mA 1.15 µA PermanentFacility
Equipment Technology protective conductor 2013+A2: 2015 @ 47
Equipments current (Cl.5.1) µA

1174 Electronics IT Others Information Touch current & IEC60950- 0 mA to 10 mA 1.15 µA PermanentFacility
Equipment Technology protective conductor 1:2005+A1:2009+A2: @ 47
Equipments current (Cl.5.1) 2013 µA

1175 Electronics IT Others Information Transformers (Annex C) IS 13252-1:2010+A1 20 °C to 600 °C 0.54 °C PermanentFacility
Equipment Technology 2013+A2: 2015 @ 43.0
Equipments °C

1176 Electronics IT Others Information Transformers (Annex C) IEC 60950-1: 2005 20 °C to 600 °C 0.54 °C PermanentFacility
Equipment Technology @ 43.0
Equipments °C
 Range of
S
1177 Discipline
Electronics IT Others Product/Material
Information Specific Test
Wiring connections & IS 13252-1:2010+A1 Testing/Limit of
Others :0- 150mm (±)MU
0.012 Test Performed
PermanentFacility
elete No. Name Group
Equipment Sub Group of test
Technology Performed
supply (Cl. 3.1) Test method
2013+A2: 2015 detection
0-25mm 0.1-250N @Value
mm @ at
Equipments 0.85 mm

1178 Electronics IT Others Information Wiring connections & IEC60950- Others :0- 150mm 0.012 PermanentFacility
Equipment Technology supply (Cl. 3.1) 1:2005+A1:2009+A2: 0-25mm 0.1-250N mm @
Equipments 2013 0.85 mm

1179 Electronics IT Others Information wiring terminal for IS 13252-1:2010+A1 0 mm to 25 mm 0.012 PermanentFacility
Equipment Technology connection of external 2013+A2: 2015 mm @
Equipments conductors (Cl. 3.3) 0.85 mm

1180 Electronics IT Others Information wiring terminal for IEC60950- 0 mm to 25 mm 0.012 PermanentFacility
Equipment Technology connection of external 1:2005+A1:2009+A2: mm @
Equipments conductors (Cl. 3.3) 2013 0.85 mm

1181 Electronics IT Others Mobile Phone Mobile Phone Handsets IS 16333 ( Part 3): Qualitative :Visual PermanentFacility
Equipment Handsets Part 3 Indian Language 2017 inspection
Support for Mobile Phone
Handsets specific
Requirements (Cl. 6)

1182 Electronics IT Others Mobile Phone Tests (Inputting of text IS 16333 ( Part 3): Qualitative :Visual PermanentFacility
Equipment Handsets and Message readability) 2017 inspection
(Cl.5.1)

1183 Electronics IT Others Mobile Phone Tests (Inputting of text IS 16333 ( Part 3): Qualitative :Visual PermanentFacility
Equipment Handsets and Message readability) 2017 inspection
(Cl.5.2)

1184 Electronics IT Printers / Office Equipment Stand-by Power IEC 62301: 2011 Qualitative :AC 1 V PermanentFacility
Equipment scanner/Copier (Printers, to 600 V DC 1 V to
Scanners, 600 V AC 0.001 A
Copiers, Fax to 20 A DC 0.001
Machines and A to 10 A 0.05 W
Multi- Function to 4.8 kW
Devices)

1185 Electronics Power UPS(online/line Uninterruptible General Provision For IS 16242 (Part 1): Others :Up to 10 0.0072 PermanentFacility
supplies & interactive) Power Systems Connection To Power 2014 Kg (Dead Weigth) mm @
stabilizers (UPS) Part 1 (Clause. 6.2) (RD , 0.01-150 mm, 0.30 mm
General and 3.2.2/3.2.3/3.2.4/ 0.1-6Nm 0-6.5KV
Safety 3.25/3.2.6/3.2.7/3.2.8)
Requirements For
UPS

1186 Electronics Power UPS(online/line Uninterruptible Abnormal Operating and IEC 62040-1: 2008 20 °C to 600 °C 1.5 °C PermanentFacility
supplies & interactive) Power Systems Fault Conditions (Clause. @ 70 °C
stabilizers (UPS) Part 1 8.3)
General and
Safety
Requirements For
UPS
 Range of
S
1187 Discipline
Electronics Power UPS(online/line Product/Material
Uninterruptible Specific
Abnormal Test
Operating and IS 16242 (Part 1): Testing/Limit
20 °C to 600 °Cof (±)MU
1.5 °C Test Performed
PermanentFacility
elete No. Name Group &
supplies Sub Group
interactive) of testSystems
Power Performed
Fault Conditions (Clause. Test
2014 method detection @Value
@ 70 °C at
stabilizers (UPS) Part 1 8.3)
General and
Safety
Requirements For
UPS

1188 Electronics Power UPS(online/line Uninterruptible Abnormal operating and IEC 62040-1: 2008 20 °C to 600 °C 1.5 °C PermanentFacility
supplies & interactive) Power Systems fault conditions (Clause @ 70 °C
stabilizers (UPS) Part 1 8.3) (RD 5.3.1/5.32 /
General and 5.3.3/5.34/5.3.5/5.3.9)
Safety
Requirements For
UPS

1189 Electronics Power UPS(online/line Uninterruptible Abnormal operating and IS 16242 (Part 1): 20 °C to 600 °C 1.5 °C PermanentFacility
supplies & interactive) Power Systems fault conditions (Clause 2014 @ 70 °C
stabilizers (UPS) Part 1 8.3) (RD 5.3.1/5.32 /
General and 5.3.3/5.34/5.3.5/5.3.9)
Safety
Requirements For
UPS

1190 Electronics Power UPS(online/line Uninterruptible Back-Feed Protection IEC 62040-1: 2008 Others :0- 0.225 PermanentFacility
supplies & interactive) Power Systems (Clause. 5.1.4) 150mm,0.01mm mm @
stabilizers (UPS) Part 1 (RD.2.10.3.3) 15 mm
General and
Safety
Requirements For
UPS

1191 Electronics Power UPS(online/line Uninterruptible Back-Feed Protection IS 16242 (Part 1): Others :0- 0.225 PermanentFacility
supplies & interactive) Power Systems (Clause. 5.1.4) 2014 150mm,0.01mm mm @
stabilizers (UPS) Part 1 (RD.2.10.3.3) 15 mm
General and
Safety
Requirements For
UPS

1192 Electronics Power UPS(online/line Uninterruptible Backfeed protection test IEC 62040-1: 2008 1 µA to 10 mA 0.0019 PermanentFacility
supplies & interactive) Power Systems (Annex I) mA @
stabilizers (UPS) Part 1 0.14 mA
General and
Safety
Requirements For
UPS

1193 Electronics Power UPS(online/line Uninterruptible Backfeed protection test IS 16242 (Part 1): 1 µA to 10 mA 0.0019 PermanentFacility
supplies & interactive) Power Systems (Annex I) 2014 mA @
stabilizers (UPS) Part 1 0.14 mA
General and
Safety
Requirements For
UPS
 Range of
S
1194 Discipline
Electronics Power UPS(online/line Product/Material
Uninterruptible Specific Test (Clause.
Battery location IEC 62040-1: 2008 Testing/Limit of
Others :0-150mm (±)MU
0.16 mm Test Performed
PermanentFacility
elete No. Name Group &
supplies Sub Group
interactive) of testSystems
Power Performed
7.6) (RD.5.2/5.3) Test method detection
0-6.5KV @Value
@ 10 at
stabilizers (UPS) Part 1 mm
General and
Safety
Requirements For
UPS

1195 Electronics Power UPS(online/line Uninterruptible Battery location (Clause. IS 16242 (Part 1): Others :0-150mm 0.16 mm PermanentFacility
supplies & interactive) Power Systems 7.6) (RD.5.2/5.3) 2014 0-6.5KV @ 10
stabilizers (UPS) Part 1 mm
General and
Safety
Requirements For
UPS

1196 Electronics Power UPS(online/line Uninterruptible Connection to IEC 62040-1: 2008 Others :0-6.5KV 0.028 PermanentFacility
supplies & interactive) Power Systems telecommunication Telecom test probe kV @ 2
stabilizers (UPS) Part 1 networks (Clause. 9) 0-10KV kV
General and (10/700µA)
Safety Jointed test probe
Requirements For ( Test Probe B)
UPS 5000±2ohm

1197 Electronics Power UPS(online/line Uninterruptible Connection to IS 16242 (Part 1): Others :0-6.5KV 0.028 PermanentFacility
supplies & interactive) Power Systems telecommunication 2014 Telecom test probe kV @ 2
stabilizers (UPS) Part 1 networks (Clause. 9) 0-10KV kV
General and (10/700µA)
Safety Jointed test probe
Requirements For ( Test Probe B)
UPS 5000±2ohm

1198 Electronics Power UPS(online/line Uninterruptible Construction details IEC 62040-1: 2008 Qualitative :0- PermanentFacility
supplies & interactive) Power Systems (Clause. 7.4) (RD.4.3.1 500N Jointed test
stabilizers (UPS) Part 1 to probe ( Test Probe
General and 4.3.5,4.3.7,4.3.11,4.4,4.5) B) 20-250°C
Safety
Requirements For
UPS

1199 Electronics Power UPS(online/line Uninterruptible Construction details IS 16242 (Part 1): Qualitative :0- PermanentFacility
supplies & interactive) Power Systems (Clause. 7.4) (RD.4.3.1 2014 500N Jointed test
stabilizers (UPS) Part 1 to probe ( Test Probe
General and 4.3.5,4.3.7,4.3.11,4.4,4.5) B) 20-250°C
Safety
Requirements For
UPS

1200 Electronics Power UPS(online/line Uninterruptible Creepage Distance/ IEC 62040-1: 2008 0 mm to 150 mm 0.16 mm PermanentFacility
supplies & interactive) Power Systems Clearance (Clause. 5.7) @ 10
stabilizers (UPS) Part 1 (RD.2.10) mm
General and
Safety
Requirements For
UPS
© 2021 - National Accreditation Board for Testing and Calibration Laboratories (NABL)