Catalog

Measuring and Regulation Equipment Manufacturer
www.metrel.si
Measuring Instruments and Testers

Electrical Installations Safety
Power Quality Analysis
HV Insulation Diagnostics
Appliances /Machines / Switchboard Safety
LAN Cabling Certification
Indoor Environment Quality
www.metrel.si
2009/marec/ang.j./D.Dolinar/Kočevski tisk
Catalog 2009
EXCELLENCE IN MEASUREMENT
• Electrical Installations Safety • Power Quality Analysis • HV Insulation Diagnostics
• Appliances/Machines/Switchboard Safety • LAN Cabling Certification • Environmental Measurement Instruments
METREL is one of the world leading Calibration Electrical Installations Safety 1

manufacturers and suppliers of high quality EurotestXA 1
electrical measurement and test instruments. • Standard calibration: The instrument is
calibrated to manufacturer's EurotestAT 2
Wealth and quality of living in all respects EurotestXE 2
require constant care, understanding and specifications using test equipment
EurotestEASI 3
innovative solutions for the following areas: traceable international standards.
Eurotest 61557 4
• electrical installations, machines and • Accredited calibration: This calibration is Instaltest 61557 4
appliances safety control, done under the guidelines of a national Earth Insulation Tester 5
• electrical power quality, accrediting organization (Slovenian Installcheck 5
• diagnostics of IT and telecommunication Accreditation) to the ISO/IEC 17025 Eurocheck 5
networks and standard and will be delivered with Euro-Z 290 A adapter 6
documentation according to the Smartec family 7
• measurement of indoor ennvironment
accrediting body. Insulation / Continuity 7
quality.
METREL is in this segment on the very top Z Line-Loop / RCD 7
of technological development, investing Quality and traceability Earth / Clamp 7
over 10% of total income in research and • Supported through certification in RCD/Loop/Line 8
development projects annually. accordance with standard ISO 9001:2000; Insulation/Continuity 8
At METREL we convey a broad spectrum ISO/IEC 17025. Earth/Clamp 8
of our knowledge and expertise to an open Slovenian Accreditation (SA) is a signatory Earth 2/3 8
market and to the end users of our of the Multilateral Agreements (MLA) of GigaOhm 1kV 9
instruments who benefit from: the European Cooperation for Line Tracer 10
• application consulting for various Accreditation (EA) and International Demonstration boards 10
technical and measurement projects, Laboratory Accreditation Cooperatiron Power Quality Analysis 11
(ILAC) for calibration and testing. Power Quality Analyser Plus 12
• technical support for use of METREL
Power Harmonics Analyser 12
instruments,
Power Simulator Set 12
• calibration and repair of instruments and Metrel training center PowerQ Plus, PowerQ 13
• education and training in METREL • Cost-free, quick trainings for customers VoltScanner 13
Training Center. who purchase new Metrel instruments. Power Monitor 13
METREL test and measuring instruments • Trainings and seminars on the following HV Insulation Diagnostics 15
are developed and manufactured in segments: TeraOhm 10 kV 15
accordance with well known Low Voltage TeraOhm 5 kV Plus 15
- technical standards,
and EMC Directives. Applied standards are GigaOhm 5 kV 15
- measuring and test methods,
IEC/EN 61010-1 for safety and EC/EN 61326 TeraOhm 5 kV 16
- use and application of Metrel instruments.
for EMC. C mark on METREL products ISO test 16
certifies that this equipment meets the Appliances / Machines /
requirements of both directives. Switchboard Safety 17
CE Multitester 17
Compliance with RoHS and WEEE Multiservicer 17
Regarding the EU Waste Electrical and OmegaGT Plus, BetaGT Plus 18
Electronic Equipment (WEEE) and Restriction AlphaPAT 18
SwiftPAT 18
of Hazardous Substances (RoHS) Directives,
LAN Cabling Certification 19
effective after 1st July, 2006, METREL is
Multi LAN 350 19
engaged in a comprehensive, company-wide
Opto LAN 20
effort to make available products that meet Cable Scanner 21
the RoHS limits on the presence of the Environmental Measurement
substances banned or restricted by RoHS. Instruments 22
Technical support Multinorm 22
Warranty and Repair Service • Hints and tips on using Metrel FonS 23
• Warranty period is 24 months. instruments in various applications Poly 23
• Economical repair service out of warranty. and conditions. Optional Accessories 24
METREL on all continents with over 150 distributors!

The fifth generation of Metrel multifunction electrical installation testers brings

know-how gained from the testing procedures into reality. This group of
instruments is on the top of the range of installation safety testers with
automated testing - AUTO SEQUENCE ® /patent pending/.
Metrel installation safety testers have been considered for a long time as
a benchmark on the market and we are proud to continue with the development
and supply of technically advanced and highly reliable instruments.
The range of Metrel electrical installation safety testers covers the needs of any installer,
constructor or inspector. Each instrument represents a strong tool for troubleshooting,
testing and diagnostic of safety on different types of installations in buildings.
Instruments are designed for testing of all main parameters of safety on electrical
installations.
Instruments are designed in accordance with international norms like IEC/EN 61557,
IEC 60364, VDE 0100, BS 7671, 16th Edition, HD 384, CEI 64.8.
With their quality features, ease of use on one side and competitive prices on the other,
Metrel installation testers are known as best buy on the market.
In addition to highly successful Eurotest 61557 and Instaltest 61557 range, a new line of
multi-functional testers has recently been launched.
EurotestXA, EurotestAT, EurotestXE and EurotestEASI are members of the new
generation of digital testers designed for the installer/contractor market.
Attractive and lightweight design accompanied with advanced technical performance will
set a new standard on the installation testers market.
EurotestXA Part No. MI 3105
6 Strong reasons to ACT now!

• Save time and speed-up operator's work
• Make test operation simple and
comprehensible
Revolutionary
• Increase reliability
AUTO SEQUENCE ® • Immediate certification
testing and certifying • Take the troubles out of report creation
safety of low voltage • Safe usage
electrical installations
Standard Set Part No. MI 3105 ST
- Instrument EurotestXA
- Soft carrying bag
- Soft carrying neck belt
The top of the range installation safety tester • Date and time, related to each saved result. - Test probes, 3 pcs (blue, black, green)
with automated testing based on patent • Testing of permanently mounted Insulation - Crocodile clips, 3 pcs (blue, black, green)
pending AUTO SEQUENCE ®. Monitoring Devices on IT systems. With the - Plug commander 1.5 m
ISFL (First Fault Leakage Current) check. - Test lead 3 x 1.5 m
Because of the need to be efficient, fast and - Power supply adapter + 6 NiMH AA batteries
competitive but still reliable and concentrated • On-line voltage monitor shows voltage levels - RS232/PS cable
on safety, all the technical content and for L-L, L-N and L-PE during the - USB cable
innovations under AUTO SEQUENCE ®, focus measurement. - Instruction manual on CD
• Fast, reliable and accurate Loop L-PE resistance - Instruction manual short
on taking care of the testing procedure itself.
measurement without RCD tripping. - Calibration certificate
If you are after a high speed, safe, and - Handbook “Measurements on electric installations
reliable least-fuss testing instrument, look no • Built-in Fuse characteristics database for quick in theory and practice” on CD
further. evaluation of measuring results at LINE/LOOP - PC SW EuroLink PRO
impedance testing.
Measuring functions: DC insulation resistance Euro Set Part No. MI 3105 EU
test, PE conductor continuity test, Line and • Field-proven Earth resistance measuring
method which eliminates stray earth currents - Standard Set
Loop resistance test with built-in Fuse - Current clamp (A 1018, low range,leakage)
during the measurement.
evaluation table, RCD test with Trip lock - PC SW EuroLink PRO Plus
function, phase sequence in 3-phase systems, • TN/TT/IT Earthing System support.
on-line voltage monitor, 2-wire and 3-wire Earth • Multi-functional schuko Plug commander for
resistance test with built-in battery operated faster execution of a measuring sequence.
generator, Earth resistance test with Two- • Built-in QUERTY keypad for creating names in
clamp method, Leakage Current test and test installation structure.
of Luminance with optional LUX meter probe. • Built-in memory based on professionally
organized structure with up to 2000 locations.
Special feature: AUTO SEQUENCE ®
• PC SW EuroLink PRO is a strong tool for
Enhanced patent pending test performance -
visual inspection and test result reporting.
one programmable procedure with several
Single Tests in a sequence. • PC SW EuroLink PRO Plus enables
professional creation of report.
Additional features:
• Rechargeable battery pack with a charger
• Clearly visible information on big 320 x 240 included in a standard set.
dots matrix display with back light. • Dimensions (w x h x l): 230 x 103 x 115 mm.
• Locator function enables tracing fuses, lines • Mass (without batteries): 1.3 kg.
and faults. Precise inductive mode.
1
EurotestAT Part No. MI 3101
6 Strong reasons to ACT now!

• Save time and speed-up operator's work
• Make test operation simple and
Revolutionary comprehensible
AUTO SEQUENCE ® • Increase reliability
• Immediate certification
testing and certifying
• Take the troubles out of report creation
safety of low voltage • Safe usage
electrical
Standard Set:
- Instrument EurotestAT
- Test probes, 3 pcs (blue, black, green)
- Crocodile clips, 3 pcs (blue, black, green)
The first installation safety tester with • Date and time, related to each saved result. - Plug commander 1.5 m
automated testing based on patent pending • Testing of permanently mounted Insulation - Test lead 3 x 1.5 m
AUTO SEQUENCE ®. Monitoring Devices on IT systems . With the - Power supply adapter + 6 NiMH AA batteries
EurotestAT is an automated robust and ISFL (First Fault Leakage Current) check. - PC SW EuroLink PRO
• On-line voltage monitor shows voltage levels - RS232/PS cable
lightweight electrical installation tester. - USB cable
Experts from the field, maintenance people, for L-L, L-N and L-PE during the measurement.
- Soft carrying bag
inspectors and specialists help us ascend and • Fast, reliable and accurate Loop L-PE - Soft carrying neck belt
descend the slopes with design and efficiency. resistance measurement without RCD tripping. - Handbook “Measurements on electric installations
The designing concepts of practicality and • Built-in Fuse characteristics database for quick in theory and practice” on CD
easiness of use reflect in the new feature evaluation of measuring results at LINE/LOOP - Instruction manual on CD
impedance testing. - Instruction manual short
named AUTO SEQUENCE ®, which the
• Field-proven Earth resistance measuring - Calibration certificate
EurotestAT is based on.
method which eliminates stray earth currents
Measuring functions: DC insulation resistance, during the measurement.
PE conductor continuity test, Line and Loop
• TN/TT/IT Earthing System support.
resistances with built-in Fuse evaluation table,
• Multi-functional schuko Plug commander for
RCD test with Trip lock function, phase
faster execution of a measuring sequence.
sequence in 3-phase systems, on-line voltage
monitor, 2-wire and 3-wire Earth resistance test • Built-in memory based on professionally
with built-in battery operated generator. organized structure with up to 2000 locations.
• Built-in QUERTY keypad for creating names in
Special feature: AUTO SEQUENCE ® installation structure.
Enhanced patent pending test performance - • PC SW EuroLink PRO is a strong tool for visual
one programmable procedure with several inspection and test result reporting.
Single Tests in sequence.
• PC SW EuroLink PRO Plus enables
Additional features: professional creation of report (optional).
• Clearly visible information on big 320 x 240 • Rechargeable battery pack with a charger
dots matrix display with backlight. included in a standard set.
• Locator function enables tracing fuses, lines • Dimensions (w x h x l): 230 x 103 x 115 mm.
and faults. Precise inductive mode. • Mass (without accessories): 1.3 kg.
EurotestXE Part No. MI 3102
test with built-in battery operated generator, Standard Set:

Leakage Current test and test of Luminance - Instrument EurotestXE
with optional LUX meter probe. - Tip commander with two function key
- Schuko-plug test cable
Additional features: - Test lead 3 x 1.5 m
• Built-in memory for storing up to 500 - Earth test set (test lead 4 m + 2 x 20 m, 2 x test rods)
measurements. - Power supply adapter + 6 NiMH AA batteries
• PC SW EuroLink PRO is a strong tool for - PC SW EuroLink PRO
- Handbook “Measurements on electric installations
visual inspection and test result reporting. in theory and practice”on CD
• PC SW EuroLink PRO Plus enables - Test probes, 3 pcs (blue, black, green)
professional creation of report (optional). - Crocodile clip, 3 pcs
• Field proven Earth resistance measuring - Soft carrying neck belt
method which eliminates stray earth currents - Soft carrying bag
during the measurement. - RS232 / PS cable and USB cable
- Instruction manual - short
EurotestXE is a typical representative of a new line of • Fast and reliable Loop resistance - Instruction manual on CD
Metrel installation safety testers. Key advantages like measurement without RCD tripping. - Calibration certificate
a lightweight design and small dimensions are • Built-in Fuse characteristics database for quick
completed with extensive measurement features. evaluation of measuring results at ZLINE
This combination makes EurotestXE a real working measurement.
horse suitable for situations where performance and • On-line voltage monitor shows voltage levels
for L-L, L-N and L-PE during the measurement
reliability are of major importance.
• TN/TT/IT Multi System support.
• Measuring functions: DC insulation • Multi-functional tip commander for faster
resistance, PE conductor continuity test, Line execution of a measuring sequence.
and Loop resistances with built-in Fuse • Rechargeable battery pack with a charger
evaluation table, RCD test with Trip lock included in a standard set.
function, phase sequence in 3-phase systems, • Dimensions (w x h x l): 230 x 103 x 115 mm.
on-line voltage monitor, 3-wire Earth resistance • Mass (without accessories): 1.3 kg.
2
EurotestEASI Part No. MI 3100
• Measuring functions: DC insulation • Rechargeable battery pack with a charger is

resistance, PE conductor continuity test, Line included in a standard set.
and Loop resistances with Fuse • Dimensions (w x h x l): 230 x 103 x 115 mm.
characteristics inside the instrument, RCD • Mass (without accessories): 1.3 kg.
test with Trip lock function, phase sequence
in 3-phase systems, on-line voltage monitor. Standard Set:
- Instrument EurotestEASI
Additional features:
- Tip commander with two function key
• Fast and reliable Loop resistance - Schuko-plug test lead
measurement without RCD tripping. - Test lead 3 x 1.5 m
• Built-in Fuse characteristics database for quick - Power supply adapter + 6 NiMH AA batteries
evaluation of measuring results at ZLINE - Handbook “Measurements on electric installations
in theory and practice”on CD
measurement.
- Test probes, 3 pcs
• On-line voltage monitor shows voltage levels - Crocodile clips, 3 pcs
for L-L, L-N and L-PE during the - Soft carrying neck belt
EurotestEASI is the first member of a new
measurement. - Soft carrying bag
line of Metrel installation safety testers.
• TN/TT/IT Multi System support - Instruction manual - short
Lightweight design and small dimensions
make it ideal for prolonged use over • Multi-functional tip commander for faster - Instruction manual on CD
execution of a measuring sequence. - Calibration certificate
a working day.
Instrument
Comparison Type
table EurotestXA EurotestAT EurotestXE EurotestEASI
SINGLE
FUNCTION
TESTS Part No.: MI 3105 MI 3101 MI 3102 MI 3100
Voltage Monitor/ TRMS / / /. /.
PHASE SEQUENCE EN 61557-7
CONTINUITY EN 61557-4 Automatic polarity exchange, 200 mA
Low current continuous 7 mA DC
Resistance Test N-PE through shuko
INSULATION - IEC/ EN 61557-2 50 / 100 / 250 / 500 / 1000 V 50 ... 1000 V 50 ... 1000 V 100 ... 1000 V 100 ... 1000 V
Automatic test between L-N-PE pairs
Adjusting test time to object Capacitance
Medical sites - IT RMD test, ISFL
LINE/LOOP EN 61557-3 Ipsc, U L-N-PE, freq
Impedance L-N and L-PE
Impedance L-L
R and Xl calculations
High accuracy RCD TRIP LOCK Loop
IT system line loop
IT system first fault loop test
Built-in Fuse base characteristics
PASS/FAIL evaluation of result
RCD EN 61557-6 RCD type A, AC, B A, AC A, AC A, AC
RCD AUTOMATIC TEST
Trip-out time t, Uc(IDN)
Trip-out current ID
EARTH EN 61557-5 Two wire earth resistance
Three wire earth resistance
High noise immunity
Two clamps earth/loop resistance
One clamp earth/loop resistance
CURRENT CLAMP TRMS Clamp Leakage Current
AUTO SEQUENCE ® Automatic test of insulation ALL L-N-PE
Automatic test of RCD
AUTO SEQUENCE ® on SwitchBoard
AUTO SEQUENCE ® on Circuit
Automatic evaluation of complete safety
Preparing results for Automatic report
Smart commands, comments, icons, instructions, etc.
SENSOR Lux Optionally Optionally
OTHER Line Tracer Optionally Optionally
Touch electrode
Evaluation PASS/FAIL results
Frequency span 15 - 500 Hz 15 - 500 Hz 45 - 65 Hz 45 - 65 Hz
Voltage systems support 440 / 230 / 110 V 440 / 230 / 110 V 440 / 230 / 110 V 440 / 230 / 110 V
Reduced low voltage system support 55 / 65 V 55 / 65 V 55 / 65 V 55 / 65 V
Earthing system support TN / TT / IT TN / TT / IT TN / TT / IT TN / TT / IT
ON LINE WARNINGS HELP menu
COMMUNICATION PORTS RS232
USB
ACCESSORIES Plug commander
Tip commander 2 wire Optionally Optionally
Tip commander 3 wire Optionally Optionally Optionally Optionally
PC Software EuroLink PRO Plus Optionally Optionally Optionally
PC Software EuroLink PRO
Querty keypad on screen
3
Eurotest 61557 Part No. MI 2086 ST, MI 2086 EU
measurements, LUX measurement, underwall Standard Set:

installation tracing, fuses locating, clamp - Instrument Eurotest 61557
current measurement up to 200 A, leakage - Plug commander 1.5 m
current measurement from 0,2 mA trms - Test lead 3 x 1.5 m
onwards, low resistance continuous - Measurement clamp - (A1018 low current, leakage -
measurements. only for MI 2086 EU)
• Eurolink Software package compatible with - Probe test lead 4 m (only for MI 2086 EU)
MS Windows operation systems is a field - Crocodile clip
proven tool for evaluation of test results on - Test probe, 2 pcs (blue and black)
a personal computer. - RS232 cable
• The EuroLink PRO Version enables fast and - PC EuroLink PRO (only for MI 2086 Euro Set)
efficient creation of a complete test protocol - PC EuroLink LITE (only for MI 2086 Standard Set)
including visual inspection report. - Set of carrying belts
- Soft carrying bag
• Dimensions (w x h x l): 265 x 110 x 185 mm.
- Instruction manual
Advanced, multi-functional digital measuring • Mass (without accessories): 2,1 kg. - Handbook "Measurements on electric installations
instrument for low voltage electrical • Optional: 110 V version for reduced low in theory and practice”
installation safety testing in accordance with voltage supply system. - Calibration certificate
IEC / EN 61557. MI 2086 EU
MI 2086 ST
• Measuring functions: DC insulation
resistance with test voltages up to 1000 V,
PE conductor continuity test, Loop and Line
impedance also without RCD triggering, RCD
test, varistor test, illumination, phase
sequence in 3-phase systems, measurements
on earthing and lightning systems with
included 2-clamp method (without junctions
disassembling).
• Other features: electrical power and
consumption measurement, current and
voltage harmonics measurement, phase
angle, frequency, contact voltage
PALM Eurolink Part No. A 1141

• New approach to better organization and faster field operation - facilitate data transfer and
Pocket PC Eurolink Part No. A 1155 simple entry of circuit names with stylus on a display.
• All the work is to be carried out on the object where measurements take place.
- simple creation of report structure as well as entry of electrical installation scheme on-site.
- defined structure with the electric installation scheme allows the entry of types and values of
fuses and FI circuit breakers. Data on different installation elements and their characteristics are
presented in tables on the PDA's display.
- the PDA's programme automatically checks all the transferred results
from instrument and assesses their values with regard to the limits.
• Work becomes better organized and, what is most important,
it can be entirely completed on site.
- The final step comprises transmitting the data structure from the
PDA to PC, pressing the »Create Report« button and its printing
on a printer.
Instaltest 61557 Part No. MI 2087 ST
DC insulation resistance measurement, PE Standard Set:

conductor continuity, Loop and Line - Instrument Instaltest 61557
resistance, RCD test and phase sequence in - Plug commander 1.5 m
3-phase systems. - Universal test cable 3 x 1.5 m
• Additional features: illumination - Crocodile clip
measurement, varistor test, frequency, - Test probes, 3 pcs (blue and black)
contact voltage, underwall installation tracing, - Handbook "Measurements on electric installations
fuse locating. in theory and practice”
- RS232 cable
• Internal memory with a capability to store up
- PC SW InstalLink
1000 test results that can later be transferred
- Set of carrying belts
to a personal computer. - Soft carrying bag
• Software package InstalLink compatible with - Instruction manual
MS Windows operation systems allows - Calibration certificate
Multifunction, digital measuring instrument download of test results from the instrument
for low voltage installation safety testing to a personal computer. Handy tool for
suitable for periodic inspections. creating test reports.
• Complete range of test functions in • Dimensions (w x h x l): 265 x 110 x 185 mm.
accordance with IEC / EN 61557: • Mass (without accessories): 1.8 kg.
4
Earth Insulation Tester Part No. MI 2088, MI 2088-20, MI 2088-50
• Specific earth resistance (soil resistance). Standard Set:

• Other features: mains voltage and frequency - Instrument Earth - Insulation Tester
measurement, clamp current measurement, - Test lead, 2 x 1.5 m
varistor testing. - Earth test Set - 20 m (MI 2088-20)
- Earth test Set - 50 m (MI 2088-50)
• Internal memory with a capability to store up
- Alligator clip
to 1000 test results that can later be
- Test probe, 2 pcs (red, black)
transferred to a personal computer. - RS232 cable
• Software package EarthLink compatible with - PC SW EarthLink (for Windows 95/98)
MS Windows operation systems allows - Soft carrying bag
download of test results from the instrument - Instruction manual
to a personal computer. - Handbook "Measurements on electric installations
• Dimensions (w x h x l): 265 x 110 x 185 mm. in theory and practice"
- Calibration certificate
• Mass (without accessories): 1.7 kg.
Multifunction, digital measuring instrument
for testing of earthing and lightning Insulation Set MI 2088 Earth test Set - 20 m MI 2088-20 Earth test Set - 50 m MI 2088-50
protection systems, PE conductor continuity
testing and DC insulation resistance
measurement on low voltage electrical
installations in accordance with IEC/EN 61557.
• Measurements on earthing and lightning
protection systems include: standard 4-wire
method, standard 4-wire method with current
clamps and 2-clamp method without junctions
disassembling.
• DC insulation resistance measurement with
test voltages from 50 V up to 1000 V in 10 V
steps. Measuring range up to 30 GW.
Installcheck Part No. MI 2150
Installcheck excels in simplicity of use which Standard Set:

enables extraordinary time savings in a low - Instrument Installcheck
voltage socket wiring test.
- Carrying belt
• All necessary measurements for electrical - Test lead, 1 m
installation safety are included: DC insulation - Safety test leads with fixed test probes, 1.5 m, 2 pcs
resistance, Continuity test, Line and Loop - Instruction Manual
resistance, RCD test, wiring check and phase - Quick Application Guide
sequence. - Calibration certificate
• Pass/Fail visual and audio presentation of results.
• With only one touch on a TEST button a
complete socket wiring test is performed in
5 seconds only.
Circuit Autotest The basic installation
Patent pending! Patent No. 200000308 checker for every
electrician!
Eurocheck Part No. CS 2099
• Professional, multi-functional field calibrator • Dimensions (w x h x l): 100 x 50 x 200 mm.

intended for use with installation test • Mass (without accessories): 0.6 kg.
instruments.
• Functioning and accuracy of all Metrel and Standard Set:
most other manufacturer’s installation test - Instrument Eurocheck
instruments can be verified with Eurocheck. - Soft carrying bag
Features
• Insulation calibration with Ut up to 1000 V.
• Low W and continuity function calibration.
• Fault loop and trip-lock impedance calibration.
• Calibration of RCD trip-out time measurement.
• Line impedance calibration.
• Voltage and frequency calibration.
Eurocheck enables simple field calibration of • Measurement leads verification.
most frequently used functions when testing • PE test terminal functional verification.
installations. • Automatic mains polarity verification.
5
Euro-Z 290 A adapter Part No. A 1143 r adapter Part No. A 1199
Standard Set: Standard Set:

- Euro-Z 290 A adapter -  adapter
- Test cable 2-wire (2 m, 1.5 mm2, 2 pcs) - Carrying bag
- Test lead (black, 2 m, 1.5 mm2, 1 pcs) - 2 earth spikes
- Crocodile clips (black, 3 pcs) - Extension cable red 15 m
- Crocodile clips (red, 2 pcs) - Cable for connection to Eurotest
- Test probes (red, 2 pcs) - Cable for connection to current spikes
- RS232 cable - Instruction manual
- CD-ROM - Calibration certificate
High resolution and accuracy - Instruction manual Optional adapter intended to
impedance measurement. - Calibration certificate perform soil resistivity measurement
Test current up to 294 A, for testing with EurotestAT or EurotestXA
impedance from 1 mW and Isc up to instruments.
400 kA. Euro-Z 290 A adapter is a  adapter standard set is designed
professional portable test adapter. to be used together with
In combination with one of the instruments EurotestAT MI 3101 or
instruments EurotestAT, EurotestXA EurotestXA MI 3105 and the set of
or Eurotest 61557 it performs high extension leads from 3-wire Earth
precision line and high precision fault set. The fourth wire is added to
loop impedance measurements.  adapter standard set.
Comparison table Eurotest Instaltest Earth-Insulation Tester Installcheck
MI 2088
MI 2086 EU MI 2088-20
Part No.: MI 2086 ST MI 2087 MI 2088-50 MI 2150
INSULATION Insulation Resistance
500 V
Test voltage 50 V/100 V/250 V/1000 V DC
CONTINUITY Continuity of PE Conductors
Automatic polarity exchange, Test current >200 mA
Low Resistance Continuous measurement
No polarity exchange, Low test current
LINE, LOOP Line Impedance ZLINE / IPCS; L-L, L-N
Loop Impedance ZLOOP / IPCS; L-PE
Contact voltage at IPCS; Auxililary test rod method
Line Resistance RLINE / IPCS; L-N
Loop Resistance RLOOP / IPCS; L-PE
Loop Resistance L-PE; Without tripping RCD, Test current 15 mA
RCD (FI) Contact voltage; (Without tripping the RCD)
Earth-Loop resistance; (Without tripping the RCD)
Earth Resistance
Test current IDN/2 (Without tripping the RCD), Auxililary test rod method
RCD Trip Out Time; Test current 0.5IDN, IDN, 5IDN IDN
RCD Trip Out Current (Ramp test)
RCD Automatic Test
EARTH Total Earth Resistance; Test method with four /three / two test rods / / / /
Particular Earth Resistance; Test method with two test rods and one clamp
Earth Resistance; Test method with two clamps
Specific Earth resistance; Test method with four test leads / four test rods
POWER, Voltage and Current Harmonics
HARMONICS Power (W, VA, Var, cos j)
Energy (Wh)
SENSOR Illumination
OTHER Varistor Breakdown Voltage
Ramp test voltage 50 up to 1000 V DC; 500 V/s
Threshold current 1mA
Mains Voltage
Voltage Logging
Current 0,2 mA up to 200 A; Clamp measurement - True RMS
Frequency
PE Terminal Test (presence of phase voltage)
Analysis of mains Outlet (Wiring)
Phase Rotation
Installation Tracing (Faults, Fuses, Wires)
ACCESSORIES Plug Commander (Start, Stop, Store)
Tip Commander (Start, Stop, Store)
PC Software PRO LITE LITE
STANDARD IEC / EN 61557 1, 2, 3, 4, 5, 6, 7 1, 2, 3, 4, 6, 7 1, 2, 4, 5 7
6
Family Single- function and multi-function measuring instruments
Singlefunction measuring instruments suitable for verification, maintenance and periodic testing of electrical installations
(insulation, continuity, fuse size, RCD) and for testing earthing resistance and soil resistivity.
• Instruments for low voltage installation testing in accordance with IEC / EN 61557.
• Simplicity of use, low weight and robust design are key attributes of these instruments.
• Internal memory for saving of measuring results with a downloading option.
• Optional PC Software package EuroLink PRO Plus/EuroLink PRO for measuring results evaluation and report creation.
• Simultaneous use of several different Smartec instruments on one location can essentially reduce needed time for execution of all necessary
measurements.
SMARTEC Insulation / Continuity Part No. MI 3121
For verification, maintenance and periodic Standard Set:

testing of electrical installations; PE conductors, - Instrument SMARTEC Insulation / Continuity
main and supplementary PE connections, - Soft hand strap
troubleshooting, insulation resistance, etc. - Test lead 3 x 1.5 m
• Large LCD display with bargraph and backlight. - Test probes, 2 pcs (black, red)
• High measuring range of up to 30 GW with - Crocodile clips, 2 pcs (black, red)
test voltage from 50 V to 1000 V.
- Power supply adapter + 6 NiMH AA rechargeable batteries
• Fast and reliable continuity tests with
- Instruction manual on CD
automatic polarity reversal.
- Short instruction manual
• Voltage and frequency measurements.
• Preprogrammed limitsPASS/FAIL evaluation of result.
- Handbook “Guide for
• Bright GREEN/RED indicators provides visual
testing and verification
evaluation of results. of low voltage
• Suited for testing on CAT IV installations. installations” on CD
• Magnetic holder allowes hands-free operation.
• PC SW package (optional).
• USB and RS232 ports.
SMARTEC Z Line-Loop / RCD Part No. MI 3122
For protective measures in LV-installations, Standard Set:

troubleshooting on live installations. Suitable - Instrument SMARTEC Z Line-Loop / RCD
for testing on CAT IV installations.
- Soft hand strap
• Supports all live tests on LV electrical circuits.
• Built-in fuse characteristics for quick. - Schuko test cable
evaluation of measuring results. - Test lead 3 x 1.5 m Test probes, 3 pcs
• RCD tests (trip out time, contact voltage, - Crocodile clips, 3 pcs (blue, black, green)
ramp test, Autotest). - Power supply adapter + 6 NiMH AA rechargeable batteries
• Testing on 1- and 3-phase systems. - Instruction manual on CD
• Phase sequence test. - Short instruction manual
• Metal test button for touch voltage detection. - Calibration certificate
• High accuracy non tripping loop test for RCD - Handbook “Guide for
protected circuits. testing and verification
• PASS/FAIL evaluation of result. of low voltage
• Bright GREEN/RED indicators provides visual installations” on CD
evaluation of results.
• Magnetic holder allowes hands-free operation.
SMARTEC Earth / Clamp Part No. MI 3123
For testing earthing resistance, main earthing Standard Set:

of objects, resistance of individual earthing - Instrument SMARTEC Earth / Clamp
rods in large systems, lightning systems, - Soft hand strap
determination of soil resistivity, designing of - Power supply adapter + 6 NiMH rechargeable AA batteries
earthing systems.
- Earth test lead 4.5 m (blue)
• Supports all types of earthing resistance - Earth test lead 4.5 m (red)
measurements.
- Earth test lead 20 m (green)
• Leakage current tests with current clamps.
- Earth test lead 20 m (black)
• Load current tests with current clamps.
- Earth test rod, 4 pcs
• High accuracy, very high immunity against - Instruction manual on CD
external noise.
- Short instruction manual
• Preprogrammed limitsPASS/FAIL evaluation
of result Bright GREEN/RED indicators
- Handbook “Guide for
provides visual evaluation of results.
testing and verification
• Suited for testing on CAT IV installations. of low voltage
• Magnetic holder enables hands-free operation. installations” on CD
• USB and RS232 ports.
7
SMARTEC RCD/Loop/Line Part No. MI 2120
Digital measuring instrument for RCD testing Standard Set:

with Loop and Line resistance measurement - Instrument SMARTEC RCD/Loop/Line
also without tripping the RCD. - Mains measuring cable, 1.5 m
• Automatic prospective short circuit current - Universal test cable, 3 x 1.5 m
calculation (Ipsc). - Crocodile clip (black), 2 pcs
- Test probe (black)
- Test probe (blue)
• Mass (without accessories): 1 kg. - Instruction manual
- Calibration
certificate
SMARTEC Insulation/Continuity Part No. MI 2123
Digital measuring instrument for DC Standard Set:

insulation resistance measurements and PE
- Instrument SMARTEC Insulation/Continuity
conductor continuity testing.
- Test lead 2 x 1.5 m
• Test voltages for DC insulation measurements - Test probe, 2 pcs (black)
from 50 V to 1000 V. Measuring range up to - Crocodile clip (black)
20 GW. - Instruction manual
• Automatic test leads compensation up to 5 W. - Calibration certificate
• Automatic discharge of the equipment under test
after completion of the test.
• Mass (without accessories): 1kg.
SMARTEC Earth/Clamp Part No. MI 2124
Digital measuring instrument for Standard Set:

measurement on earthing and lightning - Instrument SMARTEC Earth/Clamp
protection systems. - Test lead 4.5 m, (black)
• Measurements on earthing and lightning - Test lead 4.5 m, (green)
protection systems include: standard 4-wire - Test lead 15 m, (red)
method, standard 4-wire method with current - Test lead 20 m, (blue)
clamps and 2-clamp method without junctions - Earth test rod, 4 pcs
disassembling. - Instruction manual
• Specific earth resistance (soil resistance)
measurement with 4-wire method up to
30 m deep.
• True RMS current measurement.
• Mass (without accessories): 1 kg.
Earth 2/3 Earth Resistance Tester Part No. MI 2126
Earth resistance measurement Standard Set:

• 2-pole and 3-pole measurements. - Instrument Earth 2/3
• Reliable measurement results also in - Carrying strap
presence of stray currents. - Test lead 4.5 m, (black)
• Outstanding repeatability of measurement - Test lead 15 m, (red)
results also in case of high test probe - Test lead 20 m, (blue)
resistance at various earthing structures (e.g. - Earth test rod, 2 pcs
asphalt, sand, stone). - Instruction manual
• Warnings for out of limits results and
incorrect test conditions.
• Auto power-off.
• Dimensions (w x h x d): 280 x 70 x 80 mm.
• Mass: 410 g.
8
GigaOhm 1kV Insulation/Continuity Tester Part No. MI 3103
• Extremely wide range of measured insulation • Dimensions (w x h x d): 280 x 70 x 80 mm.

resistance (up to 2 GW) enables periodic • Mass: 410 g.
analysis of changes in insulation material.
• Automatic discharge of the equipment under
test after completion of the test. Standard set:
- Instrument GigaOhm 1kV
Continuity
- Test lead, 1.5 m black
• 200 mA measurement with automatic polarity - Test lead, 1.5 m red
change. - Crocodile cilip, black
• Automatic compensation of test leads - Test probes, black, red
(up to 5 W) eliminates lead resistance. - Carrying strap
• Continuous low current resistance - Instruction
measurement for testing of electrical motors, manual
inductive windings, transformers, etc. - Calibration
Insulation Resistance RMS Voltage and Frequency certificate
• Three different test voltages (250, 500 and • Warnings are given if hazardous voltages are
1000 V) provide the tests required for all detected.
installations encountered. • Auto power-off.
Comparison table Insulation / Z Line-Loop / Earth / RCD Insulation/ Earth/ GigaOhm Earth 2/3
Continuity RCD Clamp Loop/Line Continuity Clamp
Part No.: MI 3121 MI 3122 MI 3123 MI 2120 MI 2123 MI 2124 MI 3103 MI 2126
INSULATION Insulation Resistance
Test voltage 50 V, 100 V / 250 V, 500 V, 1000 V DC / / /
CONTINUITY Continuity of PE Conductors
Automatic polarity exchange, Test current >200 mA
Low Resistance Continuous measurement
No polarity exchange, Low test current
LINE, LOOP Line Impedance ZLINE / IPCS; L-L, L-N
Loop Impedance ZLOOP / IPCS; L-PE
Line Resistance RLINE / IPSC; L-N
Loop Resistance RLOOP / IPSC; L-PE
Loop Resistance L-PE; Without tripping RCD
Built in FUSE base charactaristics
RCD (FI) Contact voltage; (Without tripping the RCD)
Earth-Loop resistance; (Without tripping the RCD)
RCD Trip Out Time; Test current 0.5IDN, IDN, 5IDN
RCD Trip Out Current (Ramp test)
EARTH Earth Resistance; 2 / 3 / 4 pole connection / / / / / /
Particular Earth Resistance; two test rods and one clamp
Earth Resistance; Test method with two clamps
Specific Earth resistance; four test leads / four test rods
OTHER Mains Voltage
PE Terminal Test
Phase Rotation
Evaluation PASS/FAIL
Bright GREEN /RED led
Magnetic holder
Frequency measurement
Analysis of mains Outlet (Wiring)
ACCESSORIES Tip Commander (Start, Stop, Store) Optional Optional
PC Software EuroLink PRO Plus Optional Optional Optional
PC Software EuroLink PRO Optional Optional Optional
PC Software SmartLink
STANDARD IEC / EN 61557 - part: 1, 2, 4 1, 3, 6 1, 5 1, 3, 6 1, 2, 4 1, 5 1, 2, 4 1, 5
9
Line Tracer Part No. MI 2093
Field proven instrument for under-wall low Standard Set:

voltage installation tracing, fuse finding,
- Transmitter T10K
short-circuit spot determination and metal - Receiver R10K
installation tracing. - Test lead, 1.5 m for T10K, with built-in resistor
• Can be used on energized or voltage-free - Special selective probe
systems. - Test lead, 1.5 m for T10K, 2 pcs
• Tips and detailed descriptions of connection - Test probes, 2 pcs (black)
schemes for various combinations from - Crocodile clips, 2 pcs
everyday practice. - Small soft carrying bag
- Instruction
• Dimensions (w x h x l):
manual
- transmitter:100 x 50 x 200 mm,
- receiver: 45 x 45 x 210 mm.
• Mass: - transmitter: 0.3 kg,
- receiver: 0.15 kg.
Accurate
fuse locating
Demonstration Board Part No. MA 2067
Excellent tool for training and education • Detailed instruction manual with profound
centers, schools and laboratories. explanation of all typical measurements.
Complete representation of a real low voltage • Dimensions (w x h x l):
installation in industrial and residential areas. - board: 680 x 175 x 450 mm,
The board includes all typical elements found - board support: 700 x 400 x 320 mm.
in real systems: sockets, electrical loads, • Mass: - board: 12.5 kg.
lightning and earthing systems for TT, TN and
IT types of installations.
• 65 different measurements according to
IEC/EN61557 are supported. Standard Set:
• Fault situation simulation switches can - Demonstration Board MA 2067
generate 19 errors or combination of these. - Jumper, 4 pcs
- Demonstration board support (for vertical use)
- Single phase interface cable (code no. 20 691 648)
Demonstration Board Part No. MI 3099
The TN-C(S) or TT type of earthing system phase Outlets by new EurotestXA and EurotestAT.
on electrical installation with or without RCD • Different test instruments can be presented,
can be simulated where the loads can be using all standardized methods.
switched on or off. This board is to be used • Possibility of connection to real three phase or
for presentation of complete initial and only to single phase system.
periodic testing of safety on any electrical • Electronically protected against dangerous
installation. The difference between the contact voltage.
existing way of testing and testing according • Dimensions (w x h x l): 490 x 140 x 460 mm.
new patent pending revolutionized AUTO • Mass: 5 kg.
SEQUENCE ® solution can be expressed.
• This board is to be used preferably by sales Standard Set:
personnel when demonstrating operation - Demonstration Board
of electrical installation test equipment. - Jumper
Demonstration board MI 3099 represents - Special probes, 3 pcs
detailed installation structure with important • Various AUTO SEQUENCE ® test procedures - Mains cable
elements on Switchboard and on Circuit side, supported for demonstration of testing safety -Three phase to One phase adapter
supporting one and three phase system. on Switchboard and on one phase / three - Instruction manual
Demonstration Board Part No. MI 2166
Simulation of common electrical installation protection device, ON/OFF switch with lamp,
usually met in an individual house or mains test outlet and connection terminals.
apartment. This board is to be used • Dimensions (w x h x l): 450 x 110 x 330 mm.
preferably by sales personnel when • Mass: 3.45 kg.
demonstrating operation of electrical
installation test equipment.
• Various test methods supported by different
test instruments can be presented. Standard Set:
• Acceptable or faulty parameters can be preset - Demonstration board
by five »fault« switches. - Jumper, 2 pcs
- Mains cable
• Some real elements of electrical installation
are placed on the front panel like RCD
10
Complete range of digital power quality measuring instruments for 1- and

3-phase electric supply systems.
• Metrel power quality analysers are proven tools for expert designers of filtering systems,
power correction equipment, over voltage protection and UPS systems.
• Metrel power quality analyzers support capturing of different states and events in
electric networks like voltage sags and swells, in-rush currents, symmetry, transients,
flickers, etc.
• Automatic EN 50160 evaluation test report, including flickers.
• Measurements and recording of current, voltage, power, energy, power factor, power
character, anomalies, THD, harmonic spectrum analysis with harmonics direction.
• Scope function.
• Modem communication support for remote control of the instrument.
• Windows compatible PowerLink PC Software for profound analysis of recorded data,
management of results and report generation. Export to MS Word and Excel is
supported.
• Wide selection of standard sets and optional accessories.
Optimize electricity
consumption with Metrel
power quality analyzers
Typical applications of individual instruments

FLICKER DIAGRAMS STATISTICS REPORTS
Transients capturing with MI 2292 Power Quality Analyzer . Transients can appear due
to atmosphere discharges, switching maneuvers or capacitor banks switching. Records
can be effectively used for over voltage protection selection.
Power quality assessment

according to EN 50160 and
flicker measurement performed
with MI 2292 Power Quality
Analyser Plus.
Waveform analysis performed with MI 2292 Power Quality Analyzer Plus. Useful
feature for determining harmonics direction, UPS performance evaluation or motor
start-ups analysis.
Different pre-set loggers within MI 2392 PowerQ Plus allows quick, on-site power
quality assessment without the need to download recorded data on a PC.
Examples show phase diagram which helps when connecting the instrument on
power supply network and U, I, f logger which is a useful feature for phase
conditions evaluation. Periodic measurement of basic power quality parameters (U, I, P, Q, S, PF, etc.) with
harmonics analysis performed with MI 2092 Power Harmonics Analyser.
11
Power Quality Analyser Plus Part No. MI 2292, MI 2292F
• Measurements according to - User manual

IEC / EN 61000-4-30. - Handbook “Modern Power Quality Measurement
• Capturing of short-lasting events like Techniques” on CD
transients, in-rush currents, sags and swells - Calibration certificate
interruptions and flickers.
• Harmonics direction determination.
• Optional: 110 V version.
• Optional: remote instrument access.
Standard Set: MI 2292

Metrel´s top of the range three phase, - Instrument Power Quality Analyser Plus
multi-function power quality analyser with - Current clamp 1000 A/1 V, 3 pcs
a complete selection of test functions and - Test probes, 3 pcs
diagnostic tools for wide range of - Crocodile clips, 4 pcs
applications. - Voltage measurement cables, 4 pcs
• Automatic EN 50160 power quality - Mains cable
assessment test. - PowerLink PC SW package with RS232 cable
Standard Set: MI 2292F
• Flicker measurement in accordance with - Power supply adapter
- Similar content as MI 2292:
EN 50160. - Rechargeable batteries, 4 pcs Current clamp 1000 A/1 V, 3 pcs replaced by
- Soft carrying bag flexible current clamps 3000/300/30 A/1 V, 3 pcs
• Modem communication support for remote
control of the instrument. - Small soft carrying bag for current clamps
Power Harmonics Analyser Part No. MI 2092, MI 2092F
• Long-term recording of current, voltage, harmonics

up to 63rd component with THD up to 3 weeks.
Standard Set: MI 2092
- Instrument Power Harmonics Analyser
- Current clamp 1000 A/1 V, 3 pcs
- Crocodile clips, 4 pcs
- Voltage measurement cables, 4 pcs
- Mains cable
- PowerLink PC SW package with RS232 cable
- Rechargeable batteries, 4 pcs
Three phase, multifunction power quality - Soft carrying bag
analyser suitable for performing all the most - Small soft carrying bag for current clamps
frequent measurements and diagnostics in - User manual Standard Set: MI 2092F
different electrical systems. - Similar content as MI 2092:
- Handbook “Modern Power Quality Measurement
Techniques” on CD Current clamp 1000 A/1 V, 3 pcs replaced by
• Optional remote modem communication support. flexible current clamps 3000/300/30 A/1 V, 3 pcs
• Optional: 110 V version. - Calibration certificate
Power Simulator Set Part No. MI 2191
• Simulation of transients, inrush currents, - “Modern Power Quality measurement

flickers, harmonics, power supply outages, techniques” on CD
etc.
• Load character adjustment, adjustable current
and voltage level with a simulation of 22
different faulty conditions.
Standard Set:
- Instrument Power Simulator
- Short form quick guide plastic cards
One phase, multi-purpose power simulator
- Mains cable
for simulating typical situations in low - Current measuring cable
voltage power supply systems. - Instruction manual
• Excellent tool for training and demonstration
purposes.
12
PowerQ Plus, PowerQ Part No. MI 2392, MI 2392F, MI 2492, MI 2492F
• Pre-set logging screens allow on-site Standard Set: MI 2392, MI 2492

evaluation of all major power quality - Instrument PowerQ Plus or PowerQ
parameters (U, I, P, PF, cos j, THD, individual - Current clamp 1000 A/ 1 V, 3pcs
harmonic components, phase shift, etc. - Crocodile clips, 4 pcs
• Harmonics analysis up to 50th component. - Voltage measurement cables, 4 pcs
• Voltage unbalance calculation for 3-phase - PC SW Package PowerQ Link on CD with RS232 cable
systems. - Power supply adapter
- Rechargeable batteries, 6 pcs
• Windows compatible PowerQ Link software - Soft carrying bag
package expands the versatility of PowerQ Plus - Instruction manual
and allows transfer of stored data to a computer. - Calibration certificate
PowerQ Plus is a genuine, portable 3-phase

power quality analyser which favourably
PowerQ
competes with higher priced instruments and • Simplified version of PowerQPlus with all basic
can be easily implemented in a variety of functions and without EN 50160 assessment.
different situations. • Compatible user interface, manipulation and
• PowerQ Plus is due to its small dimensions and software with PowerQ Plus.
ease of use ideally suited for routine or
complex power quality assessment in heavy Standard Set: MI 2392F, MI 2492F
duty industrial environments. - Similar content as MI 2392, MI 2492:
• Phase diagram, inrush currents, voltage events. Current clamp 1000 A/1 V, 3 pcs replaced by
flexible current clamps 3000/300/30 A/1 V, 3 pcs
• Automatic EN 50160 power quality assessment.
VoltScanner Part No. MI 2130
High performance, digital, one phase voltage Standard Set:

recorder. - Instrument VoltScanner
• Pre-set voltage limits for power quality - Mains measuring cable, 1.5 m
assessment in accordance with EN 50160. - Battery-rechargeable NiMH 1.2 V, 4 pcs
• Recording of power supply outages and - Windows Software "ScanLink”
transient overvoltages. - RS232 cable
• Quick voltage quality assessment for unskilled - Calibration certificate
users.
• Windows compatible evaluation software
package ScanLink.
Power Monitor Part No. MI 4100
 Power and energy measurement in all four Standard Set:

quadrants (load, generator, with either - Instrument Power Monitor
inductive or capacitive character). - Instruction manual
 Active and reactive power. - Calibration certificate
 Internal memory module.
 RS-485 and MODBUS communication
ports.
 Applied standards: EN 61010-1, EN 61326.
Target applications:
• General power quality monitoring.
• Electric consumption supervision for cost
saving purposes.
• Power peak control.
Power Meter is a built-in panel meter • Industrial processes’ energy efficiency
for one or three phase power control.
measurements.
 TRMS measurement of current and
voltage.
 Harmonics up to 31st component.
 Power and crest factor measurement.
13
Comparison table Power Quality Analyser Plus Power Harmonics Analyser PowerQ Plus PowerQ VoltScanner Power Monitor
Part No.: MI 2292 MI 2092 MI 2392 MI 2492 MI 2130 MI 4100

Power Quality Testing
RMS Voltages, Currents (average, min., max.) ( voltage only) ( min, max only)
Harmonics Analysis
THD Optional
Power
Active, Reactive, Apparent
Cos j
Character, sign
Voltage Events (dips, sags, interruptions)
Logger (U, I, P, Q, S) Optional ( P, Q, S, only)
Periodic Analysis
Statistical Analysis
Anomalies (Events) Analysis
Neutral current (calculated)
On line monitoring
Meter mode - tabelaric results
Scope mode - oscilloscope
Spectrum Analysis mode Optional ( Via modbus only)
EN 50160 compliant testing
Fast Set Up - Auto mode
Voltage
THD & Harmonics
Dips, Sags, Interruptions
Flicker
Frequency
Interharmonics / Signaling
Unbalance
EN 50160 Test Report
Special tools
Fast logging mode (166 minutes)
Waveform mode (7812 periods)
Transient mode (1000 periods)
Energy
Total & Subtotal counters
Other
PC Software Optional
Modem entrance key Optional
14
High Voltage Insulation Diagnostics
HV insulation testing with advanced, field proven instruments.

• Latest advancements in development of high voltage insulation materials lead to use of modern testing principles.
• Technical demands require high performance measuring instruments capable of measuring polarization index (PI), dielectric
absorption ratio (DAR), dielectric discharge (DD), time programmable step voltage test, insulation system capacitance, etc.
• Traditional, analogue measuring instruments still have their place for less demanding applications.
• Ease of use, low EMI susceptibility, automatic discharge of a load after completed measurement are just some of many outstanding
features that distinguish Metrel HV testers from other similar products on the market.
kV
TeraOhm 10 kV Part No.: MI 3200
measurements of rotating machines, • Dimensions: 340 x 260 x 160 mm.
transformers, cables, generators, surge • Mass (without accessories): 5.5 kg.
arrestors and measuring transducers.
• Insulation resistance measuring range up to 10TW. Standard Set:
• Diagnostics tools PI, DAR and DD for - Instrument TeraOhm 10 kV
profound insulation quality assessment. - 10 kV shielded test lead with tip, 2 m
• Step voltage insulation test provides - 10 kV shielded test lead red, black, 2 m
automated insulation resistance measurement - 10 kV crocodile red, black
- Test lead (green, with crocodile clip), 2 m
at five equally spaced test voltages.
- 6 X 1.2 NiHM batteries
• Test voltage up 10 kV is adjustable in 25 V steps. - Instruction manual on CD
• Maximum charging current is limited to 5 mA. - Handbook "Modern insulation testing" on CD
• Automatic discharge of capacitive loads after - Mains cable
completed measurement. - Instruction manual
• Digital and bar graph results with date and - Calibration
time stamp. certificate
• Optional MS Windows compatible TeraLink
PC Software.
• RS232 and USB communication ports.
• High quality accessories with shielded test leads.
TeraOhm 10kV is a professional high voltage • CAT IV/600 V over-voltage category.
insulation tester with added diagnostics • Mains and rechargeable battery power
tools. It is typically used for insulation supply.
TeraOhm 5 kV Plus Part No.: MI 3201
combined with a possibility to perform a step • Dimensions: 310 x 130 x 250 mm.
voltage test which makes the instrument • Mass (without accessories): 3.0 kg.
suitable for the most demanding customers
and applications. Standard Set:
• Diagnostic tools PI, DAR and DD for detailed - Instrument TeraOhm 5 kV Plus
insulation system diagnostics. - Mains cable
- 10 kV shielded test lead set, 2 m (black, red)
• Step voltage test executes insulation - 10 kV crocodile set (black, red)
measurement at five equally spaced test voltages. - Test lead with crocodile clip, 2 m (green)
• R(t) graph graphically presents a response - 6 x 1.2 V NiMH batteries, C type
of the insulation material on the applied test - Handbook “Guide to modern insulation testing” on CD
voltage. - Instruction manual
• High charging capacity. With a maximum test - Calibration certificate
current of 5 mA test loads up to 50 μF can be
quickly charged.
• High EM immunity. With built-in noise filters tester
can be used in environments with high level of
EM interferences like open HV switchyards.
• Optional MS Windows compatible
TeraLink PC Software.
The new TeraOhm 5 kV Plus supports • RS232 and USB communication ports.
automated calculation of PI, DD and DAR, • CAT IV/600 V for industrial applications.
GigaOhm 5 kV Part No.: MI 3202
GigaOhm 5 kV is a high quality insulation and Standard Set:

voltage tester with excellent price-performance - Instrument GigaOhm 5 kV
ratio. Five test voltages up to 5 kV and 1 TW - Mains cable
resistance measuring range cover most of the - 10 kV shielded test lead set, 2 m (black, red)
industrial and power distribution applications. - 10 kV crocodile set (black, red)
- Test lead with crocodile clip, 2 m (green)
• Quick adjustment with five pre-set test - 6 x 1.2 V NiMH batteries, C type
voltages (250 V, 500 V, 1000 V, 2500 V and - Handbook “Guide to modern insulation testing” on CD
5000 V). - Instruction manual
• Fast charging – 5 mA current source for quick
charging of capacitive loads.
• CAT IV/600 V for industrial applications.
• Shieleded test leads included in a standard
set for accurate measurements.
• Large LCD with backlit.
• Dimensions: 310 x 130 x 250 mm.
15
High Voltage Insulation Diagnostics
TeraOhm 5 kV Part No.: MI 2077
• Adjustable test voltage from 250 V to 5000 V Standard Set:

in 50 V steps. - Instrument TeraOhm 5 kV
• Resistance measuring range 5 TW. - Test lead, black, red, 2 m
• Adjustable measuring time from 1 second to - Test lead (green, with crocodile clip), 2 m
30 minutes. - Test probe, 2 pcs (black, red)
- Crocodile clips black, 2 pcs
• Automatic load discharge after completed - Mains cable
measurement. - Soft carrying bag
• Guard terminal for elimination of insulation - Instruction manual
surface currents. - Calibration certificate
• AC and DC voltage measurement up to 600 V.
• Internal memory module stores up to 1000
measuring results.
Advanced, digital HV measuring instrument • Optional software package TeraLink simplifies
with maximum test voltage up to 5000V DC evaluation of results.
and resistance measuring range up to 5 TW. • Optional: 110 V version.
• Automatic PI, DAR and DD index calculation • Dimensions (w x h x l): 265 x 110 x 185 mm.
and capacitance measurement up to 50 mF. • Mass (without accessories): 2.3 kg.
ISO test Part No.: MA 2060
Precise, analogue high voltage insulation Standard Set:

resistance tester with test voltages up to
- Instrument ISOtest
5000 V DC. - Measuring lead, safety banana/safety banana, black, 2 m
• Highly reliable, robust tester for insulation - Measuring lead, safety banana/safety banana, red, 2 m
testing. User's favorite for testing motors, - Measuring lead, banana/crocodile, black, 2 m
high voltage cables, HV appliances, - Safety crocodile, 2 pcs
transformers, railway electrical systems, - Instruction manual
electrical generators, etc. - Calibration certificate
• DC test voltages: 500 V, 1 kV, 2,5 kV and
5 kV.
• Resistance measuring range up to 500 GW.
• Guard terminal for elimination of insulation
surface currents.
• AC and DC voltage measurement up to 600 V.
Comparison table TeraOhm 10 kV TeraOhm 5 kV Plus GigaOhm 5 kV TeraOhm 5 kV ISOTest
Part No.: MI 3200 MI 3201 MI 3202 MI 2077 MI 2060

Test voltage range 500 V ÷ 10 kV 250 V ÷ 5 kV 250 V ÷ 5 kV 250 V ÷ 5 kV 250 V ÷ 5 kV
Step 25 V / Step 50 V / Preset / / / / - / - / - / / - / - /
Insulation resistance range 10 TW 10 TW 1 TW 5 TW 500 GW
Graph insulation resistance R(t)
Voltage range
Timer
Capacitance measurement
Diagnostics tests (PI, DAR, DD)
Step voltage
DC withstanding test
16
Machine, portable appliance and switchgear electrical safety testers
Electrical safety verification of machines, portable electrical appliances and

switchgear with advanced digital measuring instruments.
• Complete selection of test instruments for different applications and environments. Designed
to be used in laboratories, workshops, automated production lines and building sites.
• Advanced, processor backed-up design enables time-efficient and simple measurements.
• Test functions are selected in accordance with the latest IEC/EN or VDE standards
requirements.
• Professional PC SW PAT Link PRO enables downloading, viewing and storing of measurement
results. Printing and exporting to spreadsheet applications is enabled as well. Advanced
analysis of measurement results including comparison (trend functionality), data upload
Do you develop, manufacture
to some instruments and professional report creating is enabled with password protected or service machines, electrical
PAT Link PRO Plus version. appliances or switchgear?
Assure electrical safety of
your product!
CE Multitester Part No. MI 2094
• Selected test functions, mechanical Standard Set:

construction and accompanying Software - Instrument CE Multitester
package make CE Multitester perfect for - HV test pistol - 2 m, 2 pcs
electrical safety testing in most demanding - CONTINUITY test lead - 2.5 m, 2 pcs
environments like laboratories, automated - INSULATION test lead - 2.5 m, red
production lines or specialized workshops. - INSULATION test lead - 2.5 m, black
• Test functions comprise high-voltage AC - Crocodile clip - black, 3 pcs
dielectric test with test voltage up to 5000 V, - Crocodile clip - red, 2 pcs
DC insulation resistance measurement, PE - DISCHARGE TIME cable
- Mains cable
continuity test,10 A earth bond test, discharge
- Accessory bag
time measurement, leakage current - Instruction manual
measurement and functional test. - Calibration certificate
• Automatic load discharge after completed
measurement.
• Windows compatible CE Link software
package supports test sequence programming
and measuring results evaluation on your PC.
High performance, digital measuring • Optional bar-code scanner and remote control
instrument for electrical safety testing of of the instrument.
machines, portable appliances, switchgear • Dimensions (w x h x l): 410 x 175 x 370 mm.
or other electrical devices.
MultiServicer Part No. MI 2170
for testing of electrical safety in different Standard Set:

industrial environments, workshops or R&D - Instrument MultiServicer MI 2170
laboratories. - HV test lead
• Test functions comprise: high-voltage AC - Test lead - black, 2 m
- Test lead - red, 2m
dielectric test with test voltages 2500 V and
- Test tip, black
1000 V with selectable current trip out level, - Test tip, red
DC insulation resistance measurement, PE - Crocodile clip, black
continuity test, 10 A earth bond test, - Crocodile clip, red
discharge time measurement, leakage current - PC SW PAT Link PRO
measurement and functional test. - Protective bag for accessories
• MultiServicer supports measurements of fixed
electrical loads or one-phase, smaller loads
that use schuko plug connection.
• Intently designed for machine testing.
• PC SW PAT Link PRO for downloading of test
results.
Digital measuring instrument for complete
• PC SW PAT Link PRO Plus (optional) enables
electrical safety testing of machines,
portable appliances, switchgear and other creation of professional reports and
electric devices. comparison of test results (trend functionality).
• Robust, low weight design and ease of use • Dimensions (w x h x l): 335 x 160 x 335 mm.
characterize MultiServicer as an ideal solution • Mass (without accessories): 9.5 kg.
17
OmegaGT Plus, BetaGT Plus Part No. MI 3305, MI 3304
bright LCD screen enables the unit to work in PASS/FAIL barcode label printing make
almost all lighting conditions while new retesting quick and simple.
features including portable RCD testing, • Flash Test - Dielectic strength test after
project uploading, appliance recall and retest repair safety testing (MI 3305 only)
functions, fixed appliance test ports, optional • Dimensions (w x h x l): 335 x 160 x 335 mm.
PASS/FAIL label printing and on-site test result
comparison make these instruments perfect
for PAT testing in almost any situation. Standard Set:
• RCD testing - test trip times of Portable RCDs - Instrument OmegaGT Plus MI 3305 or
in accordance with the code of practice. BetaGT Plus MI 3304
• Project uploading - Upload previous test data - Earth Bond Clip
for fast retesting of locations - Flash Test Probe (only for MI 3305)
(requires PAT Link PRO Plus software). - PC SW PAT Link PRO
• Downloading - large memory storage and
PAT Link PRO software included as standard.
• PC SW PAT Link PRO Plus (optional) enables
creation of professional reports and
The prime goal of a PAT testing engineer is to comparison of test results (trend functionality).
perform a job as quickly and efficiently as • Fixed appliances - socket available for testing
possible while ensuring that every appliance insulation, substitute leakage and full leakage
has been tested correctly. The innovative MI (via optional current clamp) of fixed appliances
3304 and MI 3305 PAT testers are built with this • Intelligent - Automatically detects the power
in mind. These portable, self-contained and supply and powers either the 110 V or 230 V
durable units can be moved between sites socket accordingly.
with minimum time and effort. The large, • Scan and test - Optional barcoding system and
AlphaPAT Part No. MI 2142
• Test functions comprise DC insulation • Dimensions (w x h x l): 265 x 110 x 185 mm.
resistance measurement, PE voltage drop / • Mass (without accessories): 3.5 kg.
earth bond continuity test, leakage current
measurement, current measurement with Standard Set:
current clamps and functional test. - Instrument AlphaPAT
• 120 pre-programmed Autotest sequences that - Earth Bond/Touch Leakage clip
- Mains cable
give information on allowed standard-set
- Carrying bag
limits for all test parameters can essentially
improve working efficiency. - Calibration certificate
• Possibility to create and store Custom
Autotests sequences.
• Alphanumeric keyboard for specific data
entries (appliance description, location, etc.)
High performance measuring instrument for
electrical safety testing of portable appliances, • Appliance identification and access to the test
IT equipment and IEC cords in accordance with sequence via Bar-code scanner or RFID tags.
corresponding IEC/EN and VDE standards. • PC SW PAT Link PRO for downloading of test
• Complete selection of test functions and results.
lightweight design make AlphaPAT an excellent • PC SW PAT Link PRO Plus (optional) enables
tool for periodic testing of portable appliances creation of professional reports and
either as field tester or as a bench instrument. comparison of test results (trend functionality).
SwiftPAT Part No. MI 3302
• Pre-adjusted Autotest measuring sequences Standard Set:

with PASS/FAIL test result verification enable - Instrument SwiftPAT
a complete safety procedure to be finished in - Earth Bond/Touch Leakage clip
several seconds. - 110 V Adapter
• Autotest sequences support safety testing of - Mains cable
portable appliances Class I and II, IT - Carrying bag
equipment Class I and II and IEC cords. - Instruction manual
• Simplicity of use and lightweight design make - Calibration certificate
SwiftPAT a good choice for field or workshop
testing.
• Test functions: DC insulation resistance
measurement, PE voltage drop / earth bond
continuity test, substitute leakage current
SwiftPAT is a perfect tool for quick, routine measurement and IEC cords polarity check.
safety testing of portable appliances, IT • Dimensions (w x h x l): 265 x 110 x 185 mm.
equipment and IEC cords. • Mass (without accessories): 2.8 kg.
18
METREL instruments for electrical appliances, machines and switchboard safety testing
The Metrel family of instruments for electrical appliances, machines and switchgear includes the following models:
CE MultiTester BetaGT Plus

High performance, digital measuring instrument for electrical safety Top of the range measuring instrument for testing of electrical
testing of machines, portable appliances, switchgear or other safety of portable appliances, IT equipment and IEC cords in
electrical devices. accordance with corresponding IEC/EN and VDE standards.
MultiServicer AlphaPAT
Digital measuring instrument for complete electrical safety testing of High performance measuring instrument for electrical safety
machines, portable appliances, switchgear and other electric testing of portable appliances, IT equipment and IEC cords in
devices. accordance with corresponding IEC/EN and VDE standards.
OmegaGT Plus SwiftPAT

Top of the range measuring instrument for testing of electrical safety AutoPAT is a perfect tool for quick, routine safety testing of
of portable appliances, IT equipment and IEC cords in accordance portable appliances, IT equipment and IEC cords.
with corresponding IEC/EN and VDE standards.
Comparison table CE Multitester Multiservicer OmegaGT Plus, AlphaPAT SwiftPAT

BetaGT Plus
Part No.: MI 2094 MI 2170 MI 3304, MI 3305 MI 2142 MI 3302

WITHSTANDING Withstanding Voltage Test, PLOAD = 500 VA
Programmable Voltage ramp up to 5000 V AC
Withstanding Voltage Test, PLOAD = 500 VA
HV test up to 5000 V AC pre-set
Withstanding Voltage Test, PLOAD = 250/500 VA
HV test 2500 V / 1000 V AC / /
Burn-out Test 500 VA, up to 5000 V
Flash Test up to 2,5 mA, (only
test voltage 1500 / 3000 V AC / / MI 3305)
INSULATION Insulation Resistance Test,
test voltage: 250 V / 500 V / 1000 V DC / / - / - / / / - / / -
Insulation Resistance Test on shuko plug,
test voltage 250 V / 500 V
CONTINUITY Continuity Test with test voltage < 12 V AC,
test current 25 A / 10 A / 200 mA / 100 mA / / / -/ / /-
Voltage Drop Test with test voltage < 12 V AC
test current >10 A AC calculated at 10 A
Automatic Start of Test
starts at connecting test leads
Earth Bond Test < 12V Ac on shuko plug
test current 25 A / 10 A / 4 A / 200 mA / 100 mA / /-/ / -/ /- / /- / / / /- / / / / / - /-/ - /
DISCHARGING Discharge Time Test
TIME - internal, external to 60 V max
Discharge Time Test
- internal, external to 120 V max
LEAKAGE Differential Leakage Current Test
CURRRENT Substitute Leakage Current Test
Touch Leakage Current Test
FUNCTIONAL Voltage
TEST Frequency
Current on shuko / with clamp - True RMS /- /- /- /-
Power VA /- /-
Power W Var, cos j
Polarity & Fault Test
OTHER Clamp current
FUNCTIONS PC Software PAT Link PRO Plus Optional Optional Optional
AND OPTIONAL
PC Software PAT Link PRO
ACCESSORIES
PC Software CE Link
Direct printing on RS232 printer
Label printing (test & tag)
Bar code scanner
RFID appliance identification
Input / Output ports
for Remote control, Warning lamps, EXT/DOOR
19
Structured cabling network testing in accordance with EN50173,

ISO/IEC 11801 and other similar standards.
• Rapid growth of structured cabling IT networks governs that LAN systems are built and
tested in accordance with standards like EN50173, ISO/IEC11801 or similar.
• Metrel offers a complete selection of high quality LAN testers for verification of copper
cabling networks up to CAT 6 (Class E).
• Metrel OptoLAN power meter supports power loss measurements on multi-mode and
single-mode fiber optics. Different wavelengths are supported with SC and
ST connectors for both, 50 μm and 62,5 μm diameters.
• Innovative solutions, high quality, user friendly design at affordable price are trade marks
of Metrel LAN testers.
• Complete selection of optional accessories helps to improve working efficiency.
Top of range CAT6 LAN

tester - incredible package
for incredible price!
Multi LAN 350 Part No. MI 2016 ST, MI 2016 PS
Standard Set: MI 2016 ST Profi Set: MI 2016 PS

- Multi LAN 350 - Instrument - Multi LAN 350 - Instrument, 2 pcs
- Multi LAN 350 - Remote unit - Permanent Link Adapter, 2 pcs
- Permanent Link Adapter, 2 pcs - Chanel Link Adapter, 2 pcs
- Chanel Link Adapter, 2 pcs - Carrying bag, 2 pcs
- Carrying bag, 2 pcs - LAN Link PC Software
- LAN Link PC Software - RS232 cable
- RS232 cable - USB cable
- USB cable - Locators (#1 - #4), 4 pcs
- Locators (#1 - #4), 4 pcs - Attenuation Calibration module
- Attenuation Calibration module - Power supply/adapter, 2 pcs
- Power supply/adapter, 2 pcs - Headphones set, 2 pcs
- Headphones set, 2 pcs - NiMH battery pack, 12 pcs
- NiMH battery pack, 12 pcs - Instruction manual
- Instruction manual - Calibration certificate
High performance, multifunction instrument
for LAN cabling verification.
• Extensive database of Autotest incorporated
into the instrument's memory allows quick
LAN cabling verification up to CAT6 (Class E) in
accordance with international standards
EN50173, TIA/EIA 658B, ISO/IEC 11801, etc.
• Complete selection of test functions combined
with easy to understand user interface makes
MultiLAN 350 a good choice for LAN cabling
companies and subcontractors as well as for
IT administrators for troubleshooting purposes.
• Apart from inbuilt Autotest there is a
possibility to perform Single tests.
Professional TDR with integrated TDR NEXT
function enables pinpoint distance to the fault
determination.
• Connectivity with UTP, STP, ScTP, FTP and
coax cables is further enhanced with • IR Fiber adapter FOA-1
a complete selection of adapters for Channel
Link and Permanent Link measurements. Enables transferring the test results from the
• Tabelaric or graphic presentation of test memory of Optical Power Meter
results. PM 420 to the instrument Multi LAN 350
• Windows compatible LAN Link software MI 2016. The Multi LAN tester automatically
package enables downloading of test results recognizes the adapter and the screen of the
and creation of a test report. instrument turns into saving mode.
• Set MI 2016PS consists of two main units that
allow bi-directional cable testing without
swapping the testers and double the memory.
20
Opto LAN PM 420, LS 420 Part No. MI 5100 ST, MI 5100 PS
•USB communication port and MultiLAN - Battery charger, 2 pcs

PC Software are provided with MI 5100PS set - Instruction manual
to transfer the stored data to your PC and - LANLink PC Software
generation of test reports. - Calibration Certificate from Accredited Calibration
•Dimensions (w x h x l): 24 x 79 x 125 mm. Laboratory
• Mass: 124 g. - Calibration certificate
Standard set Part No. Opto LAN MI 5100 ST

Same content as MI 5100 PS without:
- MultiLAN 350 IR fiber adapter FOA-1 (A 1186)
- LAN Link PC Software
OptoLAN is an optical power meter

to measure signal loss along the tested
optical fibre cable. Six wavelengths
Pro Set: Part No. Opto LAN MI 5100 PS
(850 nm, 1300 nm, 1310 nm, 1490 nm,
1550 nm, 1625 nm, 1650 nm) are - Optical Power Meter PM 420 LAN
supported to allow measurements on - Optical Light Source LS 420
multimode and single mode fibre optics. - Carrying bag
- Visible pen VSP-01
• Automatic wavelength selection.
- Patch cord FC - ST 50 μm
No adjustment needed.
- Patch cord FC - SC 50 μm
• OptoLAN MI 5100PS works together with
- Patch cord ST - SC 50 μm
MultiLAN 350, MI 2016PS, Cat. 6 cooper
tester to certify both, cooper and fiber - Patch cord FC - ST 62.5 μm
LAN cables. - Patch cord FC - SC 62.5 μm
- Patch cord ST - SC 62.5 μm
• Tester is small, lightweight and intuitive
to use. - SC adapter
- ST adapter
• It has a built-in battery charger.
- Multi LAN 350 IR fiber adapter FOA-1 (A 1186)
• Internal memory module allows storing
- USB cable
of 512 test results.
Cable Scanner Part No. MI 2014 Comparison

Tablica table
karakteristika Multi LAN 350 Cable Scanner
measurement. Acoustic
generator combined with
a receiver enables pair
determination in multi-pair
cables.
• Quick and easy determination Part No.: MI 2016 MI 2014
of various wiring failures: crossed Frequency range 0 ÷ 350 MHz
pairs, crosstalk, short-circuit,
CAT 6 ü
mismatched pairs, bad contacts,
no shield, etc.
CAT 5 / 5e ü/ ü
CAT 3 ü
• Standard set includes locators for
Coax ü
fast and simple numeration
of LAN sockets. Internal memory ü
• Optional remote unit S 2004 for PC Software ü
Cable Scanner is a simple but Cable tracer option ü ü
effective device for testing communication over the tested
cable and shorter test time. RS 232 port and cable ü
copper terminations on shielded USB port and cable
and unshielded LAN and coax • Connectivity supports UTP, STP, ü
ScTP, FTP and coax cables. Talk over copper (Talk set) ü ü
cables.
• Dimensions (w x h x l): Cable identifiers ü ü
• TDR facility with adjustable NVP
156 x 100 x 190 mm. RJ 45 output support ü ü
allows determination of distance
BNC output support ü
to the fault or cable length • Mass (without accessories): 1 kg.
Opto LAN fibretest support ü
Test functions
Standard Set: Wiremap ü ü
- Instrument Cable Scanner NEXT, RemoteNEXT ü
- Cat 5 Patch Cable-Metrel, 2 pcs PSNEXT, Remote PSNEXT ü
- Standard Remote #1 ELFEXT, PSELFEXT ü
- Locators (#1 - #4), 4 pcs Return Loss, Remote Return Loss ü
- Instruction manual ACR, Remote ACR ü
- Calibration certificate PSACR, Remote PSACR ü
Length ü ü
Propagation delay ü
Delay skew ü
Impedance ü
DC resistance ü
TDR ü ü
TDR with TD next ü ü
21
Environmental Measurement Instruments
Product family INDOORLAB

Metrel indoor environmental measuring instruments integrate a number of innovative
solutions for indoor ambient conditions monitoring. Multifunction instruments
provide the users from industry, HVAC and indoor air quality inspection with
user-friendly design, simultaneous measurement of several parameters, logging
facility, professionally designed PC Software for data management and of course, with
high accuracy and craftsmanship that lasts.
• Measurement of following non-electrical parameters are supported: air velocity,
air temperature, contact temperature, black globe temperature measurement, relative
humidity with, illuminance, luminance and sound analysis in either Class 1 or 2.
• A number of auxiliary parameters will be automatically calculated. Dew point,
air volume, PMV (predicted mean vote), WBGT (wet bulb globe temperature), real-time
octave and 1/3 octave sound analysis will complement intrinsic measurements
for better global assessment of ambient conditions.
• Additional probes, extension cables, tripod, advanced PC Software are all available as
optional accessories
• Internal memory model stores over 4000 measuring results
• Serial and USB communication ports for downloading stored data onto your computer Complete system of ISO calibration
• Sound analysis in Class 1 and Class 2 accuracy certification guarantees an overall quality
• Considered construction and application standards: EN ISO 7726, ISO 7730, ISO 7243 and accuracy especially since the probes
and the instrument are calibrated together
for IAQ, DIN 5032 (Parts 1 and 7) for luminance and illuminance, EN 12599 for HVAC,
as an integral device.
IEC 61672 and IEC 61260 Class 1/Class 2 for sound measurements.
Multinorm Combined Indoor Air Quality and sound analyser Part No. MI 6201
• Two MS Windows compatible PC Software Standard Set Part No. MI 6201ST

packages SensorLinkPRO for management - Instrument Multinorm
of environmental parameters and SoundLink - Probe adapter
LITE for profound sound analysis are delivered - Universal micro climatic probe
in a standard set. - Illumination probe type B
- Class 2 sound probe
• PC Software supports downloading of stored
- Plastic shield
data and their evaluation in either table or - Windscreen
chart form. - Carrying case
• Export to other MS programmes is possible. - SensorLink PRO and SoundLink LITE
PC software with RS232/USB cable
- Power supply adapter/charger with 6 NiMH batteries
• Mass (without accessories): 0.70 kg. - Tripod adapter
Multinorm is a multifunction instrument for

complete ambient air assessment including
Class 1 and Class 2 sound analysis.
• Measuring functions: air temperature,
contact temperature, black globe temperature,
air velocity, relative humidity, luminance,
illuminance and sound measurements.
• Calculated parameters: Dew point,
air volume, PMV (predicted mean vote),
WBGT (wet bulb globe temperature)
• Sound level meter features two independent
measuring channels compliant with
IEC 61672.
Euro Set Part No. MI 6201EU
• Sound analysis can be performed either in
- Standard Set
Class 1 or Class 2 accuracy with real octave - ISO calibration certificate for complete system
and 1/3 octave analysis compliant with
IEC 61260 standard.
• Two modes i.e. on-line measurement and Pro Set Part No. MI 6201PR
logging facility are possible and can operate - Euro Set with Class 1 sound probe instead of
Class 2 sound probe
simultaneously.
22
Environmental Measurement Instruments
FonS Sound Analyser Part No. MI 6301
• The measurement functions (where letter X Euro Set Part No. MI 6301EU
stands for A, C or Z frequency weighting, - Instrument FonS
Y for fast, slow or impulse time weighting - Class 2 sound probe
applicable to both first and second measuring - Windscreen
channels): - Plastic shield
- LXY, a time weighted sound level; - Windscreen
- LXeq, a time average sound level, or - Carrying case
equivalent continuous sound level; - SoundLink LITE PC Software with RS232/USB cable
- LXYmax, a maximum time weighted sound - Power supply adapter/changer with 6 NiMH batteries
level; - Tripod adapter
- LXYmin, a minimum time weighted sound - Instruction manual
level; - Calibration certificate
- LXpeak, a peak sound level; - ISO calibration certificate for complete system
- LXE, a sound exposure level;
• Completely digitalized Class 1 (Pro Set) or - L%, a percentile sound pressure level.
Class 2 (Euro Set) sound level meter with
• A windscreen and sound shield facilitate
two independent measuring channels
the outdoor measurements by reducing the
compliant with IEC 61672 standard. Each
wind noise and/or give protection against the
channel can be set to a different time and
dust or other small particles often found in
frequency weighting. FonS is also
the air of harsh industrial environments.
a real-time octave and 1/3 octave frequency
analyser compliant with • SoundLink LITE PC software is used
IEC 61260 standard. to download, review and export saved and
logged data to other spreadsheet software
• Operates in two modes: an on-line reading
applications. Optional frequency analysis
mode which displays current measurements
PC Software SoundLink PRO is used for data
and logger mode, which automatically stores Pro Set Part No. MI 6301PR
analysis, charting and reporting.
all measurement values per logging interval. - Euro Set with Class 1 sound probe instead of
Class 2 sound probe
Poly Indoor Air Quality measuring instrument Part No. MI 6401
• Standard measurement functions: Standard Set Part No. MI 6401ST

air temperature, air velocity/multipoint/mass - Instrument Poly
flow calculations, relative humidity/dew point - Probe adapter
and illuminance. - Universal micro climatic probe
• Measuring functions: air temperature, - Illumination probe type B
contact temperature, black globe - Carrying case
- SensorLink PC Software with RS232/USB cable
temperature, air velocity, relative humidity,
- Power supply adapter/charger with 6 NiMH batteries
luminance and illuminance.
- Tripod adapter
• Calculated parameters: Dew point, air - Instruction manual
volume, PMV (predicted mean vote), WBGT - Calibration certificate
(wet bulb globe temperature)
• USB and serial communication ports for
connecting the instrument with PC
Poly is a multipurpose environmental • MS compatible SensorLink PRO PC Software
measuring instrument for use in industry, with RS232/USB is included in a standard set
HVAC applications and indoor air quality • Dimensions (w x h x l): 220 x 115 x 90 mm.
measurements. • Mass (without accessories): 0.70 kg.
Quick reference table

Pro Set Euro Set Standard Set Euro Set Part No. MI 6401EU
Air temperature Air temperature Air temperature - Standard Set
Air velocity Air velocity Air velocity - ISO calibration certificate for complete system
Relative humidity Relative humidity Relative humidity
Multinorm Illuminance Illuminance Illuminance
MI 6201 Sound Class 1 Sound Class 2 Sound Class 2
ISO calibration certificate ISO calibration certificate Product verification
for complete system for complete system data
Sound Class 1 Sound Class 2

FonS ISO calibration certificate ISO calibration certificate
MI 6301 for complete system for complete system
Air temperature Air temperature

Air velocity Air velocity
Poly Relative humidity Relative humidity
MI 6401 Illuminance Illuminance
ISO calibration certificate Product verification
for complete system data
23
Optional Accessories
EurotestXA MI 3105 A 1111 - Three phase adapter Eurotest 61557 MI 2086

A 1143 - Euro-Z 290 A impedance adapter
A 1160 - Fast 6 cells AA Charger with a set of 6 pcs
NiMH batteries
A 1067 - Test lead, 1.5 m for R10K with built-in
resistor
A 1169 - Fast 12 cells C, AA Charger A 1005 A 1102 A 1119 A 1021
A 1191 A 1172 A 1173
A 1191 - Receiver R10K A 1002
A 1197
A 1192 - Special selective probe
A 1196 - PC SW EuroLink PRO Plus
A 1197 - Tip Commander 1.5 m, 3 W A 1052
A 1198 - Magnetic contact probe A 1012 S 2025
A 1199 - r adapter for 4 W soil resistivity A 1201 A 1202
A 1012 A 1192 A 1100 A 1111 S 2027 A 1201 - Insulated sticks for testing on LV at a
distance
A 1202 - Additional extension part for A 1201
S 2026 - Earth 20 m set 3 wire
S 2027 - Earth 50 m set 3 wire A 1143 A 1110 A 1111 A 1074 A 1018 A 1019
A 1169 A 1160 A 1198 S 2025 S 2026 CS 2099 - Eurocheck (see page 5)
EurotestXE MI 3102
A 1074 A 1018 A 1019
A 1202
A 1143 A 1199 A 1201 A 1170 A 1172 A 1173 A 1110 A 1111

S 2001 S 2002
Part No.
Part No.
A 1012 - Probe lead 4 m
A 1018 - Current clamp (low range, leakage) A 1002 - Tip commander 1,5 m
A 1019 - Current clamp A 1169 A 1160 S 2025 A 1018 A 1005 - Cable locator
A 1074 - Mini current clamp A 1012 - Probe test lead 4 m
A 1196 A 1074 A 1018 - Current clamp (low range, leakage)
A 1110 - Three phase cable
A 1111 - Three phase adapter A 1019 - Current clamp
A 1143 - Euro-Z 290 A impedance adapter A 1201 A 1202 A 1021 - General cable 4 x 1m
A 1160 - Fast 6 cells AA Charger with a set of 6 pcs Part No. A 1052 - PC SW EuroLink PRO
NiMH batteries A 1102 - Lux meter probe type B
A 1067 - Test lead, 1.5 m for R10K with built-in A 1018 - Current clamp (low range, leakage A 1110 - Three phase cable
resistor A 1074 - Mini current clamp A 1111 - Three phase adapter
A 1169 - Fast 12 cells C, AA Charger A 1110 - Three phase cable A 1119 - Lux meter probe type C
A 1111 - Three phase adapter A 1141 - PALM EuroLink (see page 4)
A 1172 - Lux meter probe, type B, PS2
A 1160 - Fast 6 cells AA Charger with a set of 6 pcs A 1155 - Pocket PC Eurolink (see page 4)
A 1173 - Lux meter probe, type C, PS2
NiMH batteries A 1171 - USB/RS232 converter with 1m fixed cable
A 1191 - Receiver R10K
A 1164 - Test lead, black 50 A 1143 - Euro-Z 290 A impendance adapter
A 1192 - Special selective probe
A 1169 - Fast 12 cells C, AA Charger A 1171 - USB/RS232 converter with 1m fixed cable
A 1197 - Tip Commander 1.5 m, 3 W
A 1196 - PC SW EuroLink PRO Plus
A 1198 - Magnetic contact probe A 1201 - Insulated sticks for testing on LV at a
A 1170 - Plug commander
A 1199 - r adapter for 4 W soil resistivity distance
A 1171 - USB/RS232 converter with 1m fixed cable
A 1201 - Insulated sticks for testing on LV at a A 1202 - Additional extension part for A 1201
A 1172 - Lux meter probe, type B, PS2
distance S 2001 - Earth test set - 20 m
A 1173 - Lux meter probe, type C, PS2
A 1202 - Additional extension part for A 1201 S 2002 - Earth test set - 50 m
A 1201 - Insulated sticks for testing on LV at a
S 2026 - Earth 20 m set 3 wire CS 2099 - Eurocheck (see page 5)
distance
S 2027 - Earth 50 m set 3 wire A 1202 - Additional extension part for A 1201
CS 2099 - Eurocheck (see page 5) S 2025 - Connection leads for mini clamp
CS 2099 - Eurocheck (see page 5)
Instaltest 61557 MI 2087
EurotestAT MI 3101 EurotestEASI MI 3100

A 1005 A 1102 A 1119 A 1021
A 1002
A 1201
A 1012 A 1192 A 1191

A 1168 A 1110 A 1111 A 1202
A 1197
A 1201 A 1202
A 1143
A 1198 S 1201 A 1100 A 1111 S 2027 A 1154 A 1153 A 1160 A 1169

A 1171 A 1012 S 2025 A 1110 A 1111
Part No.
Part No.
A 1160 A 1110 - Three phase cable
A 1111 - Three phase adapter A 1002 - Tip commander 1,5 m
A 1169 A 1196 A 1153 - Test lead black 4 m A 1005 - Cable locator
S 2026
A 1154 - Test lead black 20 m A 1012 - Probe test lead 4 m
A 1160 - Fast 6 cells AA Charger with a set of 6 pcs A 1021 - General cable 4 x 1m
A 1052 - PC SW EuroLink PRO
NiMH batteries
A 1102 - Lux meter probe type B
A 1199 A 1168 - Plug commander
A 1110 - Three phase cable
A 1169 - Fast 12 cells C, AA Charger A 1111 - Three phase adapter
A 1201 - Insulated sticks for testing on LV at a A 1119 - Lux meter probe type C
A 1143 A 1201 A 1202 distance A 1143 - Euro-Z 290 A impendance adapter
A 1202 - Additional extension part for A 1201 A 1171 - USB/RS 232 converter with 1m fixed cable
Part No. CS 2099 - Eurocheck (see page 5) A 1201 - Insulated sticks for testing on LV at a distance
A 1012 - Probe lead 4 m A 1202 - Additional extension part for A 1201
A 1110 - Three phase cable CS 2099 - Eurocheck (see page 5)
24
Earth Insulation Tester MI 2088 SMARTEC Insulation/Continuity MI 2123 A 1244 - Tip commander 1.5 m (straight cable)
A 1002 A 1270 - Tip commander 1.5 m (spiral cable)
SMARTEC Z Line-Loop / RCD MI 3122

A 1171 A 1018 A 1019
A 1020 A 1007 A 1045 A 1050
S 2001
S 2002 A 1289 A 1271 A 1160
A 1171 A 1026 A 1055 A 1642 A 1016
Part No.
Part No. A 1007 - Carrying strap
A 1002 - Tip commander 1,5 m A 1016 - Test probe, red
A 1020 - Soft carrying bag A 1244 A 1270 A 1272 A 1256
A 1018 - Current clamp (low range, leakage)
A 1019 - Current clamp A 1026 - Test lead 20 m, red
A 1171 - USB/RS 232 converter with 1m fixed cable A 1045 - Battery charger +4 or 6 pcs NiMH batteries
S 2001 - Earth test set - 20 m A 1050 - PC SW SmartLink with interface cable
S 2002 - Earth test set - 50 m A 1055 - Universal test cable, 2 x 1.5 m
A 1064 - Crocodile clip, red A 1111 A 1110 A 1198 A 1290
A 1171 - USB/RS 232 converter with 1m fixed cable A 1291
Part No.
Line Tracer MI 2093 A 1110 - Three phase cable
A 1111 - Three phase adapter
SMARTEC Earth/Clamp MI 2124 A 1160 - Fast 6 cells AA Charger with a set of 6 pcs
NiMH batteries
A 1271 - Small soft carrying bag
A 1019 A 1068 A 1074 A 1289 - Soft carrying bag
A 1290 - PC SW EuroLink PRO Plus with USB and
Part No. A 1006 A 1020
RS 232/PS2 cable
A 1019 - Current clamp A 1291 - PC SW EuroLink PRO with USB and
A 1068 - Connection cable for clamp 1.5 m RS 232/PS2 cable
A 1074 - Mini current clamp A 1171 A 1050 A 1007 A 1198 - Magnetic contact probe
A 1244 - Tip commander 1.5 m (straight cable)
A 1256 - Plug commander 1.5 m (straight cable)
A 1270 - Tip commander 1.5 m (spiral cable)
Installcheck MI 2150 A 1018 A 1019 S 2009 S 2007 A 1272 - Plug commander 1.5 m (spiral cable)
A 1111 S 1112 A 1020
Part No.
A 1006 - Soft carrying bag
A 1007 - Carrying strap SMARTEC Earth / Clamp MI 3123
A 1019 - Current clamp
A 1045 - Battery charger +4 pcs NiMH batteries
A 1114 A 1115 A 1050 - PC SW SmartLink with interface cable
A 1171 - USB/RS 232 converter with 1m fixed cable A 1271 A 1289
Part No.
S 2007 - Earth test set - 50 m
A 1020 - Small soft carrying bag S 2009 - Test lead set (blue, red, green, black) 2 m
A 1111 - Three phase adapter A 1006 A 1290
A 1114 - Crocodile clip, insulated A 1291
A 1115 - Protection case
S 1112 - Universal Test Cable 1.5 m with 3 safety test tips SMARTEC Insulation / Continuity MI 3121
A 1018 A 1019 S 2009 S 2007
SMARTEC RCD/Loop/Line MI 2121 Part No.
A 1019 - Current clamp
A 1189 A 1271 A 1160 - Fast 6 cells AA Charger with a set of 6 pcs
NiMH batteries
A 1020 A 1045 A 1050 A 1289 - Soft carrying bag
A 1290 - PC SW EuroLink PRO Plus with USB and
RS 232/PS2 cable
A 1244 A 1270 A 1154 A 1153 A 1291 - PC SW EuroLink PRO with USB and
RS 232/PS2 cable
S 2007 - Earth test set - 50 m
S 2009 - Test lead set (blue, red, green, black) 2 m
A 1171 A 1007
A 1160 A 1198 A 1290 A 1291
Part No.
Part No.
A 1007 - Carrying strap
A 1011 - Universal test cable, 3 x 1.5 m A 1153 - Test lead - black, 20 m
A 1013 - Aligator cip, black A 1154 - Test lead - black, 4 m
A 1014 - Test tip, black A 1160 - Fast 6 cells AA Charger with a set of 6 pcs
A 1016 - Test tip, blue NiMH batteries
A 1020 - Soft carrying bag A 1271 - Small soft carrying bag
A 1026 - Test lead 20 m, red A 1289 - Soft carrying bag
A 1045 - Battery charger +4 or 6 pcs NiMH bateries A 1290 - PC SW EuroLink PRO Plus with USB and
A 1050 - PC SW SmartLink with interface cable RS 232/PS2 cable
A 1171 - USB/RS 232 converter with 1m fixed cable A 1291 - PC SW EuroLink PRO with USB and
RS 232/PS2 cable
A 1198 - Magnetic contact probe
25
Power Quality Analyser Plus MI 2292 A 1227 - 1-phase flexible current clamps A 1046 - 6 x 1.2 V NiMH batteries
Power Harmonics Analyser MI 2092 3000/300/30 A/1 V A 1056 - PC SW TeraLink with RS232 cable
A 1287 - 1-phase flexible current clamps A 1171 - USB/RS232 converter with 1m fixed cable
3000/300/30 A/1 V S 2003 - High Voltage Cable Set
S 2014 - Safety fuse adapters S 2039 - 10 kV shielded test leads, 15 m, 2 pcs
S 2015 - Safety flat clamps (for MI 2077 only)
S 2042 - 10 kV shielded test leads, 8 m, 2 pcs
(for MI 2077 only)
A 1037 S 2015 A 1171
VoltScanner MI 2130
A 1020 S 1112 CE MultiTester MI 2094
S 2010 A 1171
S 2014 A 1100 A 1101

A 0941 A 0942 A 1059 A 1171 A 1061
Part No. A 1060 A 1073
A 1171 - USB/RS 232 converter with 1m fixed cable
A 1179 A 1257 A 1287 S 2010 - Set of crocodile clips(black), 3 pcs
S 1112 - Universal test cable 3 x1.5 m with 3 safety test tips
S 1057 S 1058 S 1072 A 1017
Part No.
TeraOhm 10 kV MI 3200 A 0941 - Remote control pedal
A 1033 A 1069 A 1122 A 1039 A 0942 - Warning lamp
A 1014 - Test tip, black
Part No. A 1016 - Test tip, red
A 1033 - Current clamp 1000 A/1V A 1017 - RS 232 communication cable
A 1037 - Current transformer 5 A/1 V A 1059 - ISO + CONTINUITY adapter
A 1039 - A 1039 Clamp adapter A 1060 - Two way mains adapter
(for A 1069 and A 1122) A 1061 - Bar Code scanner
A 1069 - Mini clamp 100 A/1 V to be used with S 2029 S 2030 A 1171 - USB/RS 232 converter with 1m fixed cable
A 1039 A 1073 - PC SW CE Link with A 1017 cable
A 1100 - Modem ST S 1057 - HV test cable with plug - 6 m, set of 2 pcs
A 1101 - Modem GSM S 1058 - CONTINUITY test lead - 10 m, set of 2pcs
A 1122 - Mini clamp 5 A/1 V to be used with S 1072 - CONTINUITY test lead special, 2.5 m, set of 2 pcs
A 1039
A 1124 - Modem Entrance Key
S 2036 A 1046 A 1230
A 1171 - USB/RS 232 converter with 1m fixed cable MultiServicer MI 2170
A 1179 - 3-phase flexible current clamps Part No.
2000/200/20 A/1 V
A 1046 - 6 x 1.2 V NiMH batteries
A 1257 - 3-phase flexible current clamps
A 1230 - PC SW TeraLink with USB and RS232 cable
3000/300/30 A/1 V
3000/300/30 A/1 V
S 2036 - 10 kV crocodile set, 2 pcs
S 2014 - Safety fuse adapters
S 2015 - Safety flat clamps A 1095 A 1096 S 2012 A 1171
TeraOhm 5 kV Plus MI 3201

Part No.
PowerQ Plus MI 2392 GigaOhm 5 kV MI 3202
A 1095 - INS/SUB adapter
PowerQ MI 2492 A 1096 - Adapter for hard connection
A 1203 - PC SW PAT Link PRO Plus
S 2012 - Continuity extension,10 m, set of 2 pcs
S 2029 S 2030
A 1020 A 1037 A 1039
OmegaGT Plus MI 3305
BetaGT Plus MI 3304
S 2036 A 1046 A 1275

S 2014 S 2015 A 1171
Part No.
A 1046 - 6 x 1.2 V NiMH batteries
A 1275 - PC SW TeraLink PRO with RS232
and USB cable (only for MI 3201) A 1103 A 1276 A 1226 A 1107
A 1179 A 1257 A 1227 S 2030 - 10 kV shielded test leads, 15 m, 2 pcs
S 2036 - 10 kV alligator set, 2 pcs
A 1106 A 1203 A 1108 A 1283 A 1105

Part No.
A 1033 A 1069 A 1122 TeraOhm 5 kV MI 2077 A 1103 - Printer
Part No. A 1226 - Cable for printer
A 1105 - Bar code scanner
A 1033 - Current clamp 1000 A/1V A 1106 - Bar code labels
A 1037 - Current transformer 5 A/1 V A 1107 - RFID reader/writer
A 1039 - A 1039 Clamp adapter A 1108 - RFID tags, 50 pcs
A 1171
(for A 1069 and A 1122) A 1203 - PC SW PAT Link PRO Plus
A 1069 - Mini clamp 100 A/1 V to be used with A 1039 A 1276 - Label printer with power and data cable
A 1122 - Mini clamp 5 A/1 V to be used with A 1039 A 1277 - Spare label roll, size 50 x 30 mm
A 1171 - USB/RS 232 converter with 1m fixed cable A 1046 A 1056 S 2003 A 1283 - Current clamp (low range, leakage)
2000/200/20 A/1 V Part No.
26
AlphaPAT MI 2142 A 1082 - Tracer

A 1083 - Battery charger with a set of
A 1103 A 1226 A 1106 A 1136 A 1105
6 pcs NiMH batteries
S 2004 - Talk Remote Unit with headphones set
S 2005 - Standard remote set (# 2 - # 6), 5 pcs
S 2006 - Standard remote set (# 7 - # 15), 9 pcs
Multinorm MI 6201
FonS MI 6301
Poly MI 6401
A 1160 A 1159 A 1131 A 1161 A 1132
A 1108 A 1203 A 1171 A 1107 A 1018
Part No.
A 1103 - Printer
A 1226 - Cable for printer
A 1105 - Bar code scanner
A 1106 - Bar code labels
A 1107 - RFID reader / writer
A 1108 - RFID tags, 50 pcs
A 1203 - PC SW PAT Link PRO Plus A 1180 A 1181
A 1136 - 110 V Adapter A 1152
A 1171 - USB/RS232 converter with 1m fixed cable
A 1165 A 1162
Multi LAN 350 MI 2016
A 1043 A 1044
A 1046
A 1127 A 1130 A 1171 A 1128 A 1145
Part No.
Multinorm MI 6201
#5 - #16 #17 - #28
A 1127 - Humidity & air temperature probe
A 1128 - Thermocouple probe type K wire
Part No. A 1130 - Telescopic rod with 2.5 m cable
A 1043 - Locator set II (#5 to #16) A 1131 - Black globe thermometer
A 1044 - Locator set III (#17 to #28) A 1132 - Luminance probe
A 1046 - NiMH battery pack A 1145 - Extension cable (only for luminance and
illuminance probe)
A 1152 - Sound calibrator Class 1
A 1159 - Tripod
Opto LAN MI 5100 A 1160 - Fast 6 cells AA Charger with a set of 6 pcs
NiMH batteries
A 1185 A 1161 - Tripod holder for instrument and black globe
A 1162 - PC SW SoundLink PRO
A 1180 - CO2 probe
A 1181 - CO probe
FonS MI 6301
A 1159 - Tripod
A 1184 A 1187 NiMH batteries
A 1162 - PC SW SoundLink PRO
Part No. A 1165 - Sound calibrator Class 2
A 1185 - Optical Light Source LS420 SM with A 1171 - USB/RS 232 converter with 1m fixed cable
Patch cord (3 pcs) for SM - single mode
A 1184 - Illuminated microscope
A 1187 - Multimode Fiber mandrels (2 pcs) Poly MI 6401
A 1189 - Dry cleaning set A 1127 - Humidity & air temperature probe
A 1188 - Wet cleaning tools with carrying bag A 1128 - Thermocouple probe type K wire
A 1130 - Telescopic rod with 2.5 m cable
A 1131 - Black globe thermometer
A 1132 - Luminance probe
Cable Scanner MI 2014 A 1145 - Extension Cable (only for luminance and
A 1006 A 1007 A 1082 S 2004 illuminance probe)
A 1159 - Tripod
NiMH batteries
A 1161 - Tripod holder for instrument and black globe
A 1180 - CO2 probe
A 1181 - CO probe
Subject to technical change without notice!

Note!Photographs in this catalogue may slightly differ from
#2 - #6 #7 - #15 #5 - #16 #17 - #28 the instruments at time of delivery.
S 2005 S 2006 A 1043 A 1044
Part No.
A 1006 - Soft carrying bag
A 1007 - Carrying strap
A 1043 - Locator set II (# 5 - #16)
A 1044 - Locator set III (# 17 - #28)
27
Measuring and Regulation Equipment Manufacturer
www.metrel.si
Measuring Instruments and Testers

HV Insulation Diagnostics
Appliances /Machines / Switchboard Safety
Indoor Environment Quality
www.metrel.si
2009/marec/ang.j./D.Dolinar/Kočevski tisk
Catalog 2009

Catalog

Uploaded by

Copyright:

Available Formats

Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog

Uploaded by

Copyright:

Available Formats

Measuring and Regulation Equipment Manufacturer

Measuring Instruments and Testers

Power Quality Analysis

Appliances /Machines / Switchboard Safety

LAN Cabling Certification

Indoor Environment Quality

METREL is one of the world leading Calibration Electrical Installations Safety 1

METREL on all continents with over 150 distributors!

The fifth generation of Metrel multifunction electrical installation testers brings

EurotestXA Part No. MI 3105

6 Strong reasons to ACT now!

EurotestAT Part No. MI 3101

6 Strong reasons to ACT now!

EurotestXE Part No. MI 3102

test with built-in battery operated generator, Standard Set:

EurotestEASI Part No. MI 3100

• Measuring functions: DC insulation • Rechargeable battery pack with a charger is

Eurotest 61557 Part No. MI 2086 ST, MI 2086 EU

measurements, LUX measurement, underwall Standard Set:

PALM Eurolink Part No. A 1141

Instaltest 61557 Part No. MI 2087 ST

DC insulation resistance measurement, PE Standard Set:

Earth Insulation Tester Part No. MI 2088, MI 2088-20, MI 2088-50

• Specific earth resistance (soil resistance). Standard Set:

Installcheck Part No. MI 2150

Installcheck excels in simplicity of use which Standard Set:

Eurocheck Part No. CS 2099

• Professional, multi-functional field calibrator • Dimensions (w x h x l): 100 x 50 x 200 mm.

Standard Set: Standard Set:

Comparison table Eurotest Instaltest Earth-Insulation Tester Installcheck

Family Single- function and multi-function measuring instruments

SMARTEC Insulation / Continuity Part No. MI 3121

For verification, maintenance and periodic Standard Set:

SMARTEC Z Line-Loop / RCD Part No. MI 3122

For protective measures in LV-installations, Standard Set:

SMARTEC Earth / Clamp Part No. MI 3123

For testing earthing resistance, main earthing Standard Set:

SMARTEC RCD/Loop/Line Part No. MI 2120

Digital measuring instrument for RCD testing Standard Set:

SMARTEC Insulation/Continuity Part No. MI 2123

Digital measuring instrument for DC Standard Set:

SMARTEC Earth/Clamp Part No. MI 2124

Digital measuring instrument for Standard Set:

Earth 2/3 Earth Resistance Tester Part No. MI 2126

Earth resistance measurement Standard Set:

GigaOhm 1kV Insulation/Continuity Tester Part No. MI 3103

• Extremely wide range of measured insulation • Dimensions (w x h x d): 280 x 70 x 80 mm.

Line Tracer Part No. MI 2093

Field proven instrument for under-wall low Standard Set:

Demonstration Board Part No. MA 2067

Demonstration Board Part No. MI 3099

Demonstration Board Part No. MI 2166

Complete range of digital power quality measuring instruments for 1- and

Typical applications of individual instruments

Power quality assessment

Power Quality Analyser Plus Part No. MI 2292, MI 2292F

• Measurements according to - User manual

Standard Set: MI 2292

Power Harmonics Analyser Part No. MI 2092, MI 2092F

• Long-term recording of current, voltage, harmonics