PART- I

BOQ OF PROPOSED INTERIORS AND FURNISHING WORKS FOR BANK OF BARODA KHANDWA BRANCH(NEW
PREMISES) AT KHANDWA (M.P.). Dated: 31/08/18
S.N. Description of Item Unit Quantity Rate EST Amount
Interior Works
1 1Providing & fixing of Armstrong Mineral Fibre Acoustical
Suspended Ceiling System with Classic Lite (Tegular) EDGE TILES
WITH ARMSTRONG 24mm EXPOSED GRID. The tile should have
Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance
≥84%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour
White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in
module size of 600 x 600 x 16mm with Bio Block coating on the
face of the tile, suitable for Green Building application, with
Recycled content of 35 - 38%. The tile shall be laid on Armstrong
Prelude32 with 24 mm wide T - section flanges colour white having
rotary stitching on all T sections i.e. the Main Runner, 1200 mm &
600 mm Cross Tees with a web height of 32 mm and 27mm ,25
mm respectively. The cost shall include all fittings and materials
complete including proper installation and provisioning etc. sqM 69.00
2 Providing and fixing and finishing Gypsum Board False Ceiling
as per drawing made from 60mm x 36mm G.I. 'C' main supports
suspended from the ceiling by means of 25 mm x 18 mm G.I.
suspenders fitted to the ceiling above with anchor fasteners and
rowl plugs as required and as per design, having pattas/ concealed
coves as indicated in drawings. Fixing 12.5 mm thick gypsum
board on GI channels using good quality self-tapping screws,
finishing and jointing two boards with adhesive and jointing tapes
finished complete in lines and level including coves, providing cut-
outs for light fittings and extra frame work as necessary for AC
grills and/or any other cutouts etc. complete in all respects.
Quoted rate to include cost of making opening for light fittings,
grills, diffusers, etc. coves for fitting of diffused lights etc. as
required and making good the same. Cost of additional frame
required and as directed shall also be included). It may be noted
that the vertical surfaces shall also be measured for payments and
the quoted rates should take into account this area. sqM 90.00
3 Providing and fixing coves for lighting in any shape out of 18
guage or gypsum board as required including moulding and
cornice etc. if required, coves shall be minimum 6 inch deep Rm 50.00
4 Providing & finishing walls with dual tone decorative
texture/duotone paint effects of Asian/ Nerolac or equivalent
make as per approval complete having minimum one
metallic/pearl colour laid as per the manufacturer's/ applicator's
recommendations using appropriate tools/rollers/base paints etc.
as required to achieve evenly spread, evenly shaded texture/paint
effect to the satisfaction of the Bank Engineer/ Architect. The rate
shall include cost of preparation of surface, all required tools/
scaffoldings/etc. complete and shall include recommended layers
of waterproof and/or protective coating of treated / textured/
painted surface complete as directed. sqM 15.00
5 Fabrication of Aluminum Composite Panel (ACP) Facias/column
claddings etc. as per drawings and specifications with 4 mm thick
composite panels of choice and of reputed brands like Viva,
Alstrong, Alstar as approved having two aluminum skins pre-
coated and thermally bonded on each side of non toxic
polyethylene core. The structure shall be fabricated using fresh, 18
guage 1inchx2 inch Aluminum rectangular pipe section of good
quality or members recommended by the manufacturer and in
accordance with the specifications and recommendations of the
manufacturer. The structure shall be fitted in place ON
walls/beams/columns/MS fabricated structures etc. as instructed
using recommended fixing method, adhesives, sealers, etc.
complete to the engineer-in-charge's satisfaction. The cost shall
include all scaffoldings, chase making, lifting, cutting, on site
adjustments, plaster repairing, etc. complete Nos 20.00

Page 1 of 5
S.N. Description of Item Unit Quantity Rate EST Amount
6 Providing and applying two or more coats of satin finish
synthetic enamel paint of make Asian, or equivalent of
approved shade and finish on all surfaces except on inner sides of
drawers, storage etc. or in items including the cost of painting
synthetic enamel in their rates) complete including putty,
scaffolding etc. as per the manufacturer's recommendations and to
the satisfaction of the Bank Engineer's/ Architect's satisfaction
sqM 30.00
7 Providing and fixing LAMINATED single skin panelling on walls,
front facia, boxing for rolling shutter, and/or columns and/or
glazing soffits at various parts of the premises as required with ply
framework for levelling and 6 mm thick ply of approved ISI grade,
and/or limited use of 6mm Flexible ply for panelling of circular
columns etc. including fixing as per pattern and style as directed
to achieve overall flush appearence, complete in line, level and
plumb, and finished with 1mm thk laminate of two colours of make
Formica/ Vir / Merino/Airolam / Sundek or equivalent as/approval
including grooves, inlay, limited use of economical metallic
laminates at places etc if required and as directed. Teakwood
lipping etc shall be provided where required or directed and
including provision for items like soft board/ white board, electrical
switchboards, telephone and electrical wiring etc as and where
required (but excluding the cost for the items). Teakwood lippings
etc shall also be finished with 1mm thick laminate as approved. sqM 25.00
8 Providing and fixing double skin ply partition TYPE-2having
framework size out of 2.5"x1.5" section of Gattu wood or
equivalent of plywood as/ approval for framework fixed maximum
at 2' c/c in both directions average, having on both sides 6 mm
thick plywood of app. make as per specifications and fixing pattern
to achieve overall flush appearance. Partitions shall be finished on
both sides with 1mm thk laminate of two colours of make
Formica/ Vir / Merino/Airolam / Sundek or equivalent as/approval
including inlay, 6mm ply double layering, grooves, inlay, limited
use of economical metallic laminates etc if required and as
directed. Teakwood lipping etc shall be provided where required
or directed and including provision for items like soft board/ white
board, electrical
-contd- switchboards, telephone and electrical wiring etc as and
where required (but excluding the cost for the items). All glazed
openings in partitions having 5 mm thick glass shall be counted in
partition areas and cost shall include all lippings, beadings etc.
complete required for framing etc. 8mm, 12mm glass openings
wherever applied shall neither be included in measurements nor
costing and shall be considered as separate item. Providing,
finishing and fixing of lippings/ beadings for these shall be
included in the cost. Teakwood lippings etc shall also be finished
with 1mm thick laminate as approved. sqM 38.00
9 Providing and fixing additional LAMINATED ply framing in 12
mm commercial ply for fixing of softboards/ whiteboards etc on
wall surfaces or existing single/double skin partitions including
levelling on walls, and in double thickness for small partitions on
tables etc. The framing shall be finished with laminate (on all
exposed surfaces and edges) two colours including inlay etc if
required and as directed along workstation tables (including
provision for fixing of softboard/ whiteboard etc. but excluding cost
of the same) as required as per ply/laminate fixing pattern to
achieve overall flush appearance. The framing shall include the
provision of switchboard, lan cabling, telephone wiring etc.The
cost shall also include providing and applying polish/paint .The
measurement shall include only the framed areas and softboard/
whiteboard/glass etc. shall not be included in either the area or
the rate. cost shall however include all lippings, mouldings,
beadings etc required for the proper execution of work. Teakwood
lippings etc shall also be finished with 1mm thick laminate as sqM 75.00
approved.

Page 2 of 5
S.N. Description of Item Unit Quantity Rate EST Amount
10 Providing and fixing LAMINATED full & low height storage
cabinets as storage and/or runners from 1'6" to
2'0"inchesdepth in 18mm thk. ply construction with 6mm
thk.comm. ply backing complete as per detail/ specifications with
horizontal & vertical divisions and drawers as/detail. The rate shall
include all TW lippings, outside finished in 1 mm Laminate of
reputed brands and approved shade and inside finished with 1 mm
Economical laminate as per approval on all shelves, partitions,
drawers etc. All partitions, shutters shall have wooden lipping on
edges finished in laminate. The handles & hinges will be s s finish
or as as/app. & shutters will be on ebco self closing hinges and
drawers shall be on ebco telescopic slides. The cost shall include
providing and applying putty sealers and fillers on any exposed
lipping/ woodensurfaces etc. and finished with Satin Finish
Synthetic enamel of aproved make with approved shade and finish
including thorough cleaning, rubbing and surface preparation,
having fillers and sealers as required sqM 11.00
12 Providing & placing Sofa with ply framework and corners where
specified (fully or partially upholstered) with fabric cushions. The
sofa shall have spiral "jalebi" springs as support for good quality
rubber mattress base and given shape with minimum 40 density
foam of 25 mm thickness. The upholstry shall be of good quality
fabric of upto Rs.450 per meter range as per approval and of
colour scheme as directed. The back side of the sofa shall be of
same material as front.
seats 3.00
13 Providing and fixing 12 mm thk TOUGHENED fixed glass for
glazing of size as demarcated and adjoining the doors etc and/or
as required. The glazing shall be of 12 mm thk. clear float glass,
TOUGHENED, edge polished fixed as per SS Fitting manufacturer's
recommendations and specifications, fixed to walls, granite pattas,
adjoining doors or wooden frames/ partitions, panellings etc. as
required, The fittings shall be in approved finish. Rates shall take
into consideration all aspects like edge polishing, hole making,
toughening, supply of S S Patches, transportation, handling,
lifting etc. complete upto installation.
sqM 40
14 Lamination of glass with etching film of sticker type on glass as
per the architects designs where required.
sqM 3.00
16 Providing and fixing 12mm thk single shutter glass doors, one
each at cabins etc. and a set of 2 doors in conference/entrance
(each door shutter counted individually) if required and of size
7'0" x 3'0 inche as demarcated, swing type door openable both
sides made out of 12 mm thk. clear toughened float glass, edge
polished fixed in wooden top and bottom rails of approved colour
and finished with Laminate as per drawings and specifications
fixed on Everite/ozone/ Hardwyn/ Dorma or equivalent floor
springs and provision of locking system as per approval, one set of
25mm dia S. S. brush finish pull handles as per approval and as
per approved design complete. Each door shall be treated
individually with complete set of accessories to be provided on
nos 3.00
each door.
17 Providing and fixing Door closers on doors of make
Everite/Ozone/ Hardwyn/ Dorma or equivalent upon approval
including all packing, levelling, etc. as required and upto the
architects satisfaction. Nos 9.00
18 Providing and fixing whiteboard as per approval on
partitions/walls/ other substrates in various areas of the office
including training room, cabins etc. complete including all ribs,
adhesives etc as required sqM 3.00
19 Providing and fixing Pin-up boards of 12mm thk. pin board
covered with plain matty/cotton fabric as per approval, the fabric
stuck with rubber based adhesive to the board as instructed. Cost
shall include all tw lippings, base preparation required and joints
on fabric shall not be approved. sqM 4.00
20 Providing and fixing vertical blinds for windows of Trac / Vista or
equivalent of approved shade and medium range fabric (synthetic
material) on windows including complete installation of track,
blinds upto working condition. sqM 13.00

Page 3 of 5
S.N. Description of Item Unit Quantity Rate EST Amount
21 Providing and applying paint (with single coat putty) on walls,
ceilings etc. of record rooms, store rooms, stationery rooms,
locker rooms etc. two or more coats of ICI Dulux washable
emulsion paint or equivalent - roller finish (matt) to all wall
surfaces. The paint shall be applied after thorough cleaning so as
to achieve a dirt-free, grease-free, plain surface free of residual
paints as per manufacturer's specifications, application of primer,
one coat of putty and application of primer coat after proper
levelling of putty and finally to be applied with paint. The paint
shall be applied evenly to produce uniform even surface to
approved finish including final cleaning of the premises to the Bank
Engineer's / Architect's satisfaction and complete at all level. sqM 490.00
22 Providing and placing Stainless Steel Planter for office interior
partially perforated type as per choice of design Nos 4.00
23 Providing & placing Wall Mounted Writing desk in 18mm ply
construction as per design and drawing. The table top shall be in
12 mm thick glass and sides and edges shall be finished with 1mm
thick Laminate including inlay etc if required and as directed. The
cost shall be complete with lippings, mouldings, fittings and
accessories etc as per specifications. nos 2.00
24 Providing and fixing single shutter flush doors of approx size
7'0" x 3'0inche as instructed, hinged type door openable one
side as instructed, made up of superior quality waterproof flush
door fully or partially glazed (but cost of glass not included). The
door shall be flush door of approx. 32-38 mm thickness, both sides
finished with 1mm thick Textured Laminate (up to rs.850/- per
sq.mt.) as per designs provided and Cost shall be inclusive of
beadings, all accessories like hinges, medium quality mortise
handles/locks, baby latches, stoppers etc. Fittings shall be in ss
finish as per approval,
nos 3.00
25 Providing and fixing single shutter flush doors of approx size
7'0" x 2'6inche as instructed, hinged type door openable one
side as instructed, made up of superior quality waterproof flush
door fully or partially glazed (but cost of glass not included). The
door shall be flush door of approx. 32-38 mm thickness, both sides
finished with 1mm thick Textured Laminate (up to rs.850/- per
sq.mt.) as per designs provided and Cost shall be inclusive of
beadings, all accessories like hinges, medium quality mortise
handles/locks, baby latches, stoppers etc. Fittings shall be in ss
finish as per approval,
nos 7.00
26 Providing and fixing and finishing Saint Gobain Make 75mm Thick
Metal Stud Partition with 12.5mm FRMR Gypboard as per
drawing. 75mm thick metal stud partition which includes one layer
of tapered edge 12.5mm thick gypsum board FRMR (conforming to
IS:2095-2011-Part-1) is screw fixed with drywall screws of 25mm
at 300mm centers to either side of 48mm boxed C stud (0.5mm
thick having one flange of 34mm and another flange of 36 mm
made of G.I. Steel) placed at 305mm centre to centre in 50 mm
floor and ceiling channel (0.5mm thick have equal flanges of
32mm made of G.I. Steel), which is anchored to the floor and true
ceiling using suitable anchor fasteners or metal screws with nylon
plugs. The boards are to be fixed to the framework with joints
staggered

Page 4 of 5
S.N. Description of Item Unit Quantity Rate EST Amount
-cont'd- to avoid leakage through joints. A Noggin channel has to
be provided at the horizontal joints of the two boards screw fixed
to the studs using metal to metal Flat head screws. Finally square
and tapered edges of the boards are to be jointed and finished so
as to have flush look which includes filling and finishing with
jointing compound, joint paper tape. 50mm glass wool of density
32kg /cu.m shall be placed in the cavity. including coves, providing
cut-outs for light fittings and extra frame work as necessary for AC
grills and/or any other cutouts etc. complete in all respects.
Quoted rate to include cost of making opening for light fittings,
grills, diffusers, etc. coves for fitting of diffused lights etc. as
required and making good the same. Cost of additional frame
required and as directed shall also be included). It may be noted
that the vertical surfaces shall also be measured for payments and
the quoted rates should take into account this area.
sqM 22.00
27 Hard Wood frame inside gypsum partition for doors of size 7'-
0"x3'-0"of section approximate 2"x2" and size of frame for
support of door as pr Architect's drawing and requirement. nos 1.00
Grand Total

In words Rs.

Page 5 of 5