Chapter 4 Forces and Newton’s Laws of Motion

Chapter 4

FORCES AND NEWTON’S LAWS OF MOTION

PREVIEW

Dynamics is the study of the causes of motion, in particular, forces. A force is a push or a
pull. We arrange our knowledge of forces into three laws formulated by Isaac Newton:
the law of inertia, the law of force and acceleration (Fnet = ma), and the law of action and
reaction. Friction is the force applied by two surfaces parallel to each other, and the
normal force is the force applied by two surfaces perpendicular to each other. Newton’s
law of universal gravitation states that all masses attract each other with a gravitational
force which is proportional to the product of the masses and inversely proportional to the
square of the distance between them. The gravitational force holds satellites in orbit
around a planet or star.
The content contained in all sections of chapter 4 of the textbook is included on the AP
Physics B exam.

QUICK REFERENCE

Important Terms

coefficient of friction
the ratio of the frictional force acting on an object to the normal force exerted by
the surface in which the object is in contact; can be static or kinetic
dynamics
the study of the causes of motion (forces)
equilibrium
the condition in which there is no unbalanced force acting on a system, that is, the
vector sum of the forces acting on the system is zero.
force
any influence that tends to accelerate an object; a push or a pull
free body diagram
a vector diagram that represents all of the forces acting on an object
friction
the force that acts to resist the relative motion between two rough surfaces which
are in contact with each other
gravitational field
space around a mass in which another mass will experience a force
gravitational force
the force of attraction between two objects due to their masses

47
 Chapter 4 Forces and Newton’s Laws of Motion

inertia
the property of an object which causes it to remain in its state of rest or motion at
a constant velocity; mass is a measure of inertia
inertial reference frame
a reference frame which is at rest or moving with a constant velocity; Newton’s
laws are valid within any inertial reference frame
kinetic friction
the frictional force acting between two surfaces which are in contact and moving
relative to each other
law of universal gravitation
the gravitational force between two masses is proportional to the product of the
masses and inversely proportional to the square of the distance between them.
mass
a measure of the amount of substance in an object and thus its inertia; the ratio of
the net force acting on an accelerating object to its acceleration
net force
the vector sum of the forces acting on an object
newton
the SI unit for force equal to the force needed to accelerate one kilogram of mass
by one meter per second squared
non-inertial reference frame
a reference frame which is accelerating; Newton’s laws are not valid within a
non-inertial reference frame.
normal force
the reaction force of a surface acting on an object
static friction
the resistive force that opposes the start of motion between two surfaces in
contact
weight
the gravitational force acting on a mass

Equations and Symbols

F  Fnet  ma where
W  mg
f s max   s FN ( static ) F = force
m = mass
f k   k FN (kinetic) a = acceleration
Gm1 m2 W = weight
FG 
r2 g = acceleration due to gravity
fs max = maximum static frictional force
fk = kinetic frictional force
FN = normal force
FG = gravitational force
r = distance between the centers of two
masses

48
Chapter 4 Forces and Newton’s Laws of Motion

49
 Chapter 4 Forces and Newton’s Laws of Motion

Ten Homework Problems

Chapter 4 Problems 23, 24, 36, 44, 52, 58, 67, 68, 70, 80

DISCUSSION OF SELECTED SECTIONS

Newton’s Laws of Motion

The first law of motion states that an object in a state of constant velocity (including zero
velocity) will continue in that state unless acted upon by an unbalanced force. The
property of the book which causes it to follow Newton’s first law of motion is its inertia.
Inertia is the sluggishness of an object to changing its state of motion or state of rest. We
measure inertia by measuring the mass of an object, or the amount of material it contains.
Thus, the SI unit for inertia is the kilogram. We often refer to Newton’s first law as the
law of inertia.

The law of inertia tells us what happens to an object when there are no unbalanced forces
acting on it. Newton’s second law tells us what happens to an object which does have an
unbalanced force acting on it: it accelerates in the direction of the unbalanced force.
Another name for an unbalanced force is a net force, meaning a force which is not
canceled by any other force acting on the object. Sometimes the net force acting on an
object is called an external force.

Newton’s second law can be stated like this: A net force acting on a mass causes that
mass to accelerate in the direction of the net force. The acceleration is proportional to
the force (if you double the force, you double the amount of acceleration), and inversely
proportional to the mass of the object being accelerated (twice as big a mass will only be
accelerated half as much by the same force). In equation form, we write Newton’s second
law as

Fnet = ma

where Fnet and a are vectors pointing in the same direction. We see from this equation
 kg  m
that the newton is defined as a .
s2

The weight of an object is defined as the amount of gravitational force acting on its mass.
Since weight is a force, we can calculate it using Newton’s second law:

Fnet = ma becomes Weight = mg,

where the specific acceleration associated with weight is, not surprisingly, the
acceleration due to gravity. Like any force, the SI unit for weight is the newton.

50
 Chapter 4 Forces and Newton’s Laws of Motion

Newton’s third law is sometimes called the law of action and reaction. It states that for
every action force, there is an equal and opposite reaction force. For example, let’s say
your calculator weighs 1 N. If you set it on a level table, the calculator exerts 1 N of force
on the table. By Newton’s third law, the table must exert 1 N back up on the calculator. If
the table could not return the 1 N of force on the calculator, the calculator would sink into
the table. We call the force the table exerts on the calculator the normal force. Normal is
another word for perpendicular, because the normal force always acts perpendicularly to
the surface which is applying the force, in this case, the table. The force the calculator
exerts on the table, and the force the table exerts on the calculator are called an action-
reaction pair.

4.3 – 4.4 Newton’s Second Law of Motion and the Vector Nature of
Newton’s Second Law of Motion

Since force is a vector quantity, we may break forces into their x and y components. The
horizontal component of a force can cause a horizontal acceleration, and the vertical
component of a force can cause a vertical acceleration. These horizontal and vertical
components are independent of each other.

Example 1 A forklift lifts a 20-kg box with an upward vertical acceleration of 2.0 m/s2,
while pushing it forward with a horizontal acceleration of 1.5 m/s2.

(a) Draw a free-body diagram for the box on the diagram below.

(b) What is the magnitude of the horizontal force Fx acting on the box?
(c) What is the magnitude of the upward normal force FN the platform exerts on the box?
(d) If the box starts from rest at ground level (x = 0, y = 0, and v = 0) at time t = 0, write
an expression for its vertical position y as a function of horizontal distance x.
(e) On the axes below, sketch a y vs x graph of the path which the box follows. Label all
significant points on the axes of the graph.

51
 Chapter 4 Forces and Newton’s Laws of Motion

y(m)

Solution:
FN

(a)
ay = 2.0 m/s2

Fx
ax = 1.5 m/s2

(b) The horizontal force Fx exerted by the wall causes the horizontal acceleration ax = 1.5
m/s2. Thus, the magnitude of the horizontal force is

Fx = max = (200 kg)(1.5 m/s2) = 300 N

(c) In order to accelerate the box upward at 2.0 m/s2, the normal force FN must first
overcome the downward weight of the box. Writing Newton’s second law in the vertical
direction gives

Fnet y = may

(FN – W) = may

(FN – mg) = may

FN = may + mg = (200 kg)(2.0 m/s2) + (200 kg)(9.8 m/s2) = 2360 N

52
 Chapter 4 Forces and Newton’s Laws of Motion

(d) Since the box starts from rest on the ground, we can write

1 1
x a x t 2 and y  a y t 2
2 2

Substituting for ax and ay, we get

x
1
2
 
1.5 m / s 2 t 2 and y 
1
2
 
2.0 m / s 2 t 2

Solving both sides for t and setting the equations equal to each other yields

2.0 4
y x x
1.5 3

(e) The graph of y vs x would be linear beginning at the origin of the graph and having a
4
positive slope of :
3

y(m)

3 x(m)

4.7 The Gravitational Force

Newton’s law of universal gravitation states that all masses attract each other with a
gravitational force which is proportional to the product of the masses and inversely
proportional to the square of the distance between them. The gravitational force holds
satellites in orbit around a planet or star.

The equation describing the gravitational force is

Gm1 m2
FG 
r2
where FG is the gravitational force, m1 and m2 are the masses in kilograms, and r is the
distance between their centers. The constant G simply links the units for gravitational
force to the other quantities, and in the metric system happens to be equal to 6.67 x 10-11
Nm2/kg2. Like several other laws in physics, Newton’s law of universal gravitation is an
inverse square law, where the force decreases with the square of the distance from the
centers of the masses.

53
 Chapter 4 Forces and Newton’s Laws of Motion

Example 2 An artificial satellite of mass m1 = 400 kg orbits the earth at a distance

r = 6.45 x 106 m above the center of the earth. The mass of the earth is m2 = 5.98 x 1024
kg. Find (a) the weight of the satellite and (b) the acceleration due to gravity at this
orbital radius.

Solution (a) The weight of the satellite is equal to the gravitational force that the earth
exerts on the satellite:

Gm1 m2 (6.67 x10 11 kg )(400 kg )(5.98 x10 24 kg )

FG    3835 N
r2 (6.45 x10 6 m) 2

(b) The acceleration due to gravity is

W F 3835 N m
g  G   9.59 2
m1 m1 400 kg s

Note that even high above the surface of the earth, the acceleration due to gravity is not
zero, but only slightly less than at the surface of the earth.

4.8 – 4.9 The Normal Force, Static and Kinetic Frictional Forces

The normal force FN is the perpendicular force that a surface exerts on an object. If a box
sits on a level table, the normal force is simply equal to the weight of the box:

FN

If the box were on an inclined plane, the normal force would be equal to the component
of the weight of the box which is equal and opposite to the normal force:
FN
y
mgsinθ
x
mgcosθ
θ

mg θ

54
 Chapter 4 Forces and Newton’s Laws of Motion

In this case, the component of the weight which is equal and opposite to the normal force
is mgcos θ.

Friction is a resistive force between two surfaces which are in contact with each other.
There are two types of friction: static friction and kinetic friction. Static friction is the
resistive force between two surfaces which are not moving relative to each other, but
would be moving if there were no friction. A block at rest on an inclined board would be
an example of static friction acting between the block and the board. If the block began to
slide down the board, the friction between the surfaces would no longer be static, but
would be kinetic, or sliding, friction. Kinetic friction is typically less than static friction
for the same two surfaces in contact.

The ratio of the frictional force between the surfaces divided by the normal force acting
on the surfaces is called the coefficient of friction. The coefficient of friction is
represented by the Greek letter  (mu). Equations for the coefficients of static and kinetic
friction are

f s max fk
s  and  k , where fs is the static frictional force and fk is the kinetic
FN FN
frictional force. Note that the coefficient of static friction is equal to ratio of the
maximum frictional force and the normal force. The static frictional force will only be as
high as it has to be to keep a system in equilibrium.

When you draw a free-body diagram of forces acting on an object or system of objects,
you would want to include the frictional force as opposing the relative motion (or
potential for relative motion) of the two surfaces in contact.

Example 3 A block of wood rests on a board. One end of the board is slowly lifted until
the block just begins to slide down. At the instant the block begins to slide, the angle of
the board is θ. What is the relationship between the angle θ and the coefficient of static
friction μs?

Solution Let’s draw the free-body diagram for the block on the inclined plane:

FN
f
y
mgsinθ
x
mgcosθ
θ

mg θ

55
 Chapter 4 Forces and Newton’s Laws of Motion

At the instant the block is just about to move, the maximum frictional force directed up
the incline is equal and opposite to the +x-component of the weight down the incline, and
the normal force is equal and opposite to the y-component of the weight.

f s max  mg sin 
FN  mg cos 
Then
f s max mg sin 
s    tan 
FN mg cos 

This expression is only valid for the case in which the static frictional force is maximum.

Example 4 After the block in Example 3 just begins to move, should the board be
lowered or raised to keep the block moving with a constant velocity down the incline?
Explain your answer.

Solution Since the coefficient of kinetic friction is generally less than the coefficient of
static friction for the same two surfaces in contact, the block would require less force
directed down the incline (mgsin θ) to keep it sliding at a constant speed. Thus, the board
should be lowered to a smaller θ just after the block begins to slide to keep the block
moving with a constant velocity.

4.10 – 4.11 The Tension Force, Equilibrium Applications of Newton’s

Laws of Motion

The force in a rope or cable that pulls on an object is called the tension force. Like any
other force, tension can accelerate or contribute to the acceleration of an object or system
of objects.

Example 5 An elevator cable supports an empty elevator car of mass 300 kg. Determine
the tension in the cable when the elevator car is (a) at rest and (b) the car has a downward
acceleration of 2.0 m/s2.

56
 Chapter 4 Forces and Newton’s Laws of Motion

Solution (a) The free-body diagram for the car would look like this:

FT

When the elevator car is at rest, the tension in the cable FT is equal to the weight W of the
car:

FT = W = mg = (300 kg)(10 m/s2) = 3000 N.

(b) When the elevator car is being lowered with an acceleration of 2.0 m/s2, the
downward weight force is greater than the upward tension force. We can use Newton’s
second law to find the tension in the cable. Choosing the downward direction as positive,

F  ma
(W  FT )  ma
m
FT  W  ma  (3000 N )  (300 kg )(2.0 )  2400 N upward.
s2

A system is said to be static if it has no velocity and no acceleration. According to

Newton’s first law, if an object is in static equilibrium, the net force on the object must
be zero.

57
 Chapter 4 Forces and Newton’s Laws of Motion

Example 6 Three ropes are attached as shown below. The tension forces in the ropes are
T1, T2, and T3, and the mass of the hanging ball is m= 3.0 kg.

30º 40º
T2
T3

T1

Since the system is in equilibrium, the net force on the system must be zero. We can find
the tension in each of the three ropes by finding the vector sum of the tensions and setting
this sum equal to zero:

T2 T2y
T3y
T3
T3x

T2x
T1
T1

T1 + T2 + T3 = 0

Since T1 is in the negative y-direction, T1 must be equal to the weight mg of the mass. As
we resolve each tension force into its x- and y-components, we see that

T1 = mg = (3.0 kg)(10 m/s2) = 30 N

T2x = T2cos40 and T2y = T2sin40

T3x = T3cos30 and T3y = T3sin30

Since the forces are in equilibrium, the vector sum of the forces in the x-direction must
equal zero:

ΣFx = 0

58
 Chapter 4 Forces and Newton’s Laws of Motion

T2x = T3x

T2cos40 = T3cos30

T3 cos 30
T2   1.13T3
cos 40

The sum of the forces in the y-direction must also be zero:

ΣFy = 0

T2y + T3y = W

T2sin40 + T3sin30 = W

Knowing that T2  1.13T3 , we can solve the equations above for each of the tensions in
the ropes:

1.13T3  sin 40  T3 sin 30  mg

 3.0kg  10 m2 
mg  s   24.4 N
T3  
1.13 sin 40  sin 30 1.23

T2  1.13T3  1.13( 24.4 N )  27.6 N

4.12 Nonequilibrium Applications of Newton’s Laws of Motion

If the net force acting on a system is not zero, the system must accelerate. A common
example used to illustrate Newton’s second law is a system of blocks and pulley.

Example 7 In the diagram below, two blocks of mass m1 = 2 kg and m2 = 6 kg are

connected by a string which passes over a pulley of negligible mass and friction. What is
the acceleration of the system?

2 kg
6 kg

59
 Chapter 4 Forces and Newton’s Laws of Motion

Solution Let’s draw a free-body force diagram for each block. There are two forces
acting on each of the masses: weight downward and the tension in the string upward. Our
free-body force diagrams should look like this:

T T

W1

W2

Writing Newton’s second law for each of the blocks:

F1  m1a
T  m1 g  m1a
T  m1 g  m1a
and
F2  m2a
m2 g  T  m2 a
T  m2 g  m2 a

Notice that the tension T acting on the 2 kg block is greater than block its weight, but the
6 kg block has a greater weight than the tension T. This is, of course, the reason the 6 kg
block accelerates downward and the 2 kg block accelerates upward. The tension acting on
each block is the same, and their accelerations are the same. Setting their tensions equal
to each other, we get

m1 g  m1a  m2 g  m2 a

Solving for a, we get

m
a  5. 0
s2

60
 Chapter 4 Forces and Newton’s Laws of Motion

Example 8 A block of mass m1 = 2 kg rests on a horizontal table. A string is tied to the

block, passed over a pulley, and another block of mass m2 = 4 kg is hung on the other end
of the string, as shown in the figure below. The coefficient of kinetic friction between the
2 kg block and the table is 0.2. Find the acceleration of the system.
2 kg

μk = 0.2

4 kg

Solution Once again, let’s draw a free-body force diagram for each of the blocks, and
then apply Newton’s second law.

FN
T

fk

W1
W2

61
 Chapter 4 Forces and Newton’s Laws of Motion

Block 1:

F1  m1a Block 2:

T  f k  m1 a
F2  m2a
T   k FN  m1 a
W2  T  m2 a
Since FN  m1 g ,
m2 g  T  m2 a
T   k m1 g  m1 a
T  m2 g  m2 a
T   k m1 g  m1 a

Setting the two equations for T equal to each other:

 k m1 g  m1 a  m 2 g  m 2 a

Solving for a and substituting the values into the equation, we get

 4kg  10 m2    0.2 2kg  10 m2 

m2 g   k m1 g  s   s  m
a  6 2
m1  m2 2kg  4kg s

Example 9 Three blocks of mass m1, m2, and m3 are connected by a string passing over
a pulley attached to a plane inclined at an angle θ as shown below.

m2

m1

m3 θ
θ

The friction between each block on the inclined plane and the surface of the plane has a
magnitude f.

(a) Draw the forces acting on each block.

(b) Assuming that m3 is large enough to descend and cause the system to accelerate,
determine the acceleration of the system in terms of the given quantities and fundamental
constants.

62
 Chapter 4 Forces and Newton’s Laws of Motion

(c) As m2 reaches the top of the inclined plane, it comes to rest up against the pulley. The
vertical string supporting m3 is cut, and m1 and m2 begin to slide down the incline.
Assuming m1 = m2, what is the speed of the blocks after they have slid a distance d down
the plane?

Solution (a)

FN2

T2 FN1
T1
T2 T1

f
W2

W1

W3

(b) Since the pulley serves only to change the direction of the tension in the string that
passes over it, we may find the acceleration of the system by treating the masses as if
they lie in a straight line and are accelerated by the weight of the hanging block m3:
a

m3
m2 m1 2W1 sinθ
W3
2f

Newton’s second law:

F  ma
W3  2W1 sin   2 f   m1  m2  m3  a
W3  2W1 sin   2 f
a
 m1  m2  m3 

63
 Chapter 4 Forces and Newton’s Laws of Motion

(c) Since m1 = m2, and friction f acts equally on both, they slide down the plane with equal
acceleration and speed. Thus, the two blocks slide down the incline as if they were
one block of mass m1 + m2 accelerated down the plane by a force of (m1 + m2)gsin θ
against a frictional force of 2f directed up the plane.

(m1+m2)gsinθ

2f

Newton’s second law for the system is

 F  ma
 m1  m2  g sin   2 f   m1  m2  a
a 1
 m  m2  g sin   2 f
 m1  m2 
The speed can be found by the kinematic equation
2 2
vf  vi  2ad
Since the initial velocity is zero,
1
   m  m2  g sin   2 f  2
vf  2ad  2  1 d 
   m1  m2   

64
 Chapter 4 Forces and Newton’s Laws of Motion

CHAPTER 4 REVIEW QUESTIONS

For each of the multiple-choice questions below, choose the best answer.
Unless otherwise noted, use g = 10 m/s2 and neglect air resistance.

1. The amount of force needed to keep a

30 45
0.2 kg hockey puck moving at a constant ˚º ˚º
speed of 7 m/s on frictionless ice is T2
T3
(A) zero
(B) 0.2 N
(C) 0.7 N T1
(D) 7 N
(E) 70 N W=30N

2. A force of 26 N is needed to 4. Which of the following is true of the

overcome a frictional force of 5 N to magnitudes of tensions T1, T2, and T3 in
accelerate a 3 kg mass across a floor. the ropes in the diagram shown above?
What is the acceleration of the mass? (A) T1 must be greater than 30 N.
(A) 4 m/s2 (B) The tension T2 is greater than T1.
(B) 5 m/s2 (C) The y-component of T2 and T3 is
(C) 7 m/s2 equal to 30 N.
(D) 20 m/s2 (D) The sum of the magnitudes of T2 and
(E) 60 m/s2 T3 is equal to T1.
(E) The sum of the magnitudes of T1 and
3. A force of 100 N directed at an angle T2 is equal to T3.
of 45 from the horizontal pulls a 70 kg
sled across a frozen frictionless pond. 5. Two blocks of mass m and 5m are
The acceleration of the sled is most connected by a light string which passes
nearly (sin 45 = cos 45 = 0.7) over a pulley of negligible mass and
(A) 1.0 m/s2 friction. What is the acceleration of the
(B) 0.7 m/s2 masses in terms of the acceleration due
(C) 7 m/s2 to gravity, g?
(D) 35 m/s2 (A) 4g
(E) 50 m/s2 (B) 5g
(C) 6g
(D) 4/5 g
(E) 2/3 g

65
 Chapter 4 Forces and Newton’s Laws of Motion

6. A 1-kg block rests on a frictionless

table and is connected by a light string to 9. Which of the following diagrams of
another block of mass 2 kg. The string is two planets would represent the largest
passed over a pulley of negligible mass gravitational force between the masses?
and friction, with the 2 kg mass hanging
vertically. What is the acceleration of (A)
the masses? c
(A) 5 m/s2 m m
(B) 6.7 m/s2
(C) 10 m/s2 r
(D) 20 m/s2
(E) 30 m/s2
(B) m m
7. Friction
(A) can only occur between two surfaces 2r
which are moving relative to one
another. 2m
(B) is equal to the normal force divided (C) m
by the coefficient of friction.
(C) opposes the relative motion between 2r
the two surfaces in contact.
(D) only depends on one of the surfaces 2m
in contact. (D) m
(E) is always equal to the applied force.
r

(E) 2m 2m

2r
30˚

10. A satellite is in orbit around the

8. A 2-kg wooden block rests on an earth. Consider the following quantities:
inclined plane as shown above. The I. distance from the center
frictional force between the block and of the earth
the plane is most nearly (sin 30 = 0.5, II. mass of the earth
cos 30 = 0.87, tan 30 = 0.58) III. mass of the satellite
(A) 2 N
(B) 10 N The gravitational acceleration g depends
(C) 12 N on which of the above?
(D) 17 N (A) I only
(E) 20 N (B) I and II only
(C) III only
(D) I and III only
(E) I, II, and III

66
 Chapter 4 Forces and Newton’s Laws of Motion

Free Response Question

Directions: Show all work in working the following question. The question is worth 15
points, and the suggested time for answering the question is about 15 minutes. The parts
within a question may not have equal weight.

1. (15 points)
A block of mass m rests on an air table (no friction), and is pulled with a force probe,
producing the Force vs. acceleration graph shown below.

(a) Determine the mass of the block.

The block is now placed on a rough horizontal surface having a coefficient of static
friction μs = 0.2, and a coefficient of kinetic (sliding) friction μk = 0.1.

(b) What is the minimum value of the force F which will cause the block to just begin to
move?

F
L

F
θ

μs=0.2 ; μk=0.1

67
 Chapter 4 Forces and Newton’s Laws of Motion

(c) After the block begins to move, the same force determined in part (b) continues to act
on the block. What is the acceleration of the block?

(d) The force F is now tripled to 3F, which then pulls the block up an incline of angle
θ = 20˚ and having a coefficient of kinetic friction μk = 0.1.

i. Draw the free-body diagram for the block as it is being pulled up the incline.

ii. Determine the magnitude of the frictional force fk acting on the block as it
slides up the incline.

iii. Determine the acceleration of the block as it is pulled up the incline.

ANSWERS AND EXPLANATIONS TO CHAPTER 4 REVIEW QUESTIONS

Multiple Choice

1. A
The law of inertia states that no net force is needed to keep an object moving at a constant
velocity.

2. C
The net force is 26 N – 5 N = 21 N, and the acceleration is
Fnet 21 N
a   7 m / s2
m 3 kg
3. A
Only the x-component of the force accelerates the sled horizontally: Fx=(100 N)cos45˚=
Fx 70 N
70 N. Then a    1m / s 2
m 70 kg

68
 Chapter 4 Forces and Newton’s Laws of Motion

4. C
T2y + T3y must equal the weight of the block (30 N), since the system is in equilibrium.

5. E
The net force acting on the system is 5mg – mg = 4 mg. Then
2
Fnet  4mg   5  1 ma , and a = g.
3

6. B
The weight of the 2-kg block is the net force accelerating the entire system.
2
2mg  3ma , so a = g = 6.7 m/s2.
3

7. C
Friction acts on each of the surfaces in contact that are moving or have the potential for
moving relative to each other.

8. B
Since the block is in static equilibrium, the frictional force must be equal and opposite to
the component of the weight pointing down the incline:
f  mg sin    2kg  10 m / s 2  sin 30  10 N

9. D
The greater the mass, and the smaller the separation distance r, the greater the force
according to Newton’s law of universal gravitation.

10. B
GM E
Since the acceleration due to gravity g  , it does not depend on the mass of the
r2
satellite.

Free Response Problem Solution

(a) 2 points
Fnet
Newton’s 2nd law states that m  . This ratio is the slope of the F vs. a graph. So,
a
F 15 N  0
m  slope    3kg
a 5 m / s 2  0
(b) 2 points
The block will just begin to move when the force F overcomes the maximum static
frictional force:
Fmin  f s   s FN   s mg   0.2  3kg  10 m / s 2   6 N

69
 Chapter 4 Forces and Newton’s Laws of Motion

(c) 3 points
Once the block begins to move we must use the coefficient of kinetic friction to
determine the frictional force.
f k   k FN   k mg   0.1 3kg  10 m / s 2   3 N
Then the net force acting on the block is F – fk = 6 N – 3 N = 3 N to the right.
The acceleration of the block is
Fnet 3N
a   1m / s 2
m 3 kg
FN
(d) 3F

i. 3 points
mgsinθ

fk
mgcosθ

mg

ii. 2 points
As the block sides up the incline, the normal force FN is no longer equal to mg, but
mgcosθ.

f k   k FN   k mg cos   0.1 3kg  10 m / s 2  cos 20  2.8 N

iii. 3 points
The net force is now

3F  f k  mg sin   3 6 N   2.8 N   3kg  10 m / s 2  sin 20  5 N

Fnet 5N
a   1.67 m / s 2
m 3 kg

70