Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 6/30/2021
Design code EN

Material
Steel S 355

1/9
Project:
Project no:
Author:

Project item CON1

Design
Name CON1
Description
Analysis Capacity design

Beams and columns

β – Direction γ - Pitch α - Rotation Offset ex Offset ey Offset ez X
Name Cross-section Forces in
[°] [°] [°] [mm] [mm] [mm] [mm]
B 4 - U450 0.0 0.0 0.0 0 0 0 Node 0
B1 5 - Iw300x200 -90.0 0.0 0.0 0 0 -75 Bolts 75

Cross-sections
Name Material
4 - U450 S 355
5 - Iw300x200 S 355

Bolts
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
M20 8.8 M20 8.8 20 800.0 314
M16 8.8 M16 8.8 16 800.0 201

2/9
Project:
Project no:
Author:

Load effects
N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE-MC1 B1 0.0 0.0 -5.3 0.0 0.0 0.0

Check

Summary
Name Value Status
Analysis 100.0% OK
Plates 0.0 < 5.0% OK
Bolts 1.8 < 100% OK
Welds 7.6 < 100% OK

Plates
Thickness σEd εPl σcEd
Name Loads Status
[mm] [MPa] [%] [MPa]
B-bfl 1 12.0 LE-MC1 4.5 0.0 0.0 OK
B-tfl 1 12.0 LE-MC1 4.4 0.0 0.0 OK
B-w 1 12.0 LE-MC1 3.1 0.0 0.0 OK
B1-tfl 1 14.0 LE-MC1 8.2 0.0 1.0 OK
B1-bfl 1 14.0 LE-MC1 3.6 0.0 0.0 OK
B1-w 1 10.0 LE-MC1 7.0 0.0 0.3 OK
FP1 12.0 LE-MC1 6.6 0.0 0.3 OK
SPL1 10.0 LE-MC1 15.9 0.0 1.0 OK
RIB1 10.0 LE-MC1 6.4 0.0 0.0 OK

Design data

γov fy γsh εlim

Material
[-] [MPa] [-] [%]
S 355 1.00 355.0 1.00 5.0

Symbol explanation
γov Material overstrength factor
εPl Strain
σEd Eq. stress
σcEd Contact stress
fy Yield strength
εlim Limit of plastic strain
γsh Strain hardening
* Dissipative item

3/9
 Project:
Project no:
Author:

Strain check, LE-MC1

Bolts
Ft,Ed V Utt Fb,Rd Uts Utts
Name Grade Loads Status
[kN] [kN] [%] [kN] [%] [%]

B1 M20 8.8 - 1 LE-MC1 0.1 1.2 0.1 190.7 1.3 1.4 OK

B2 M20 8.8 - 1 LE-MC1 0.0 1.2 0.0 158.9 1.3 1.3 OK

B3 M20 8.8 - 1 LE-MC1 0.1 1.2 0.1 142.5 1.3 1.4 OK

B4 M16 8.8 - 2 LE-MC1 1.6 0.1 1.8 116.1 0.1 1.4 OK

B5 M16 8.8 - 2 LE-MC1 1.7 0.1 1.8 116.6 0.2 1.5 OK

Design data
Ft,Rd Bp,Rd Fv,Rd
Name
[kN] [kN] [kN]
M20 8.8 - 1 141.1 232.8 94.1
M16 8.8 - 2 90.4 184.7 60.3

4/9
Project:
Project no:
Author:

Symbol explanation
Ft,Rd Bolt tension resistance EN 1993-1-8 tab. 3.4
Ft,Ed Tension force
Bp,Rd Punching shear resistance
V Resultant of shear forces Vy, Vz in bolt
Fv,Rd Bolt shear resistance EN_1993-1-8 table 3.4
Fb,Rd Plate bearing resistance EN 1993-1-8 tab. 3.4
Utt Utilization in tension
Uts Utilization in shear

5/9
 Project:
Project no:
Author:

Detailed result for B5

Tension resistance check (EN 1993-1-8 tab 3.4)
k2 fub As
Ft,Rd = γM 2 =  90.4 kN ≥ Ft =  1.7 kN
where:
k2 = 0.90 – Factor

fub = 800.0 MPa – Ultimate tensile strength of the bolt

As = 157 mm2 – Tensile stress area of the bolt
γM 2 = 1.25 – Safety factor

Punching resistance check (EN 1993-1-8 tab 3.4)

0.6πdm tp fu
Bp,Rd = γM 2 =  184.7 kN ≥ Ft =  1.7 kN
where:
dm = 25 mm – The mean of the across points and across flats dimensions of the bolt head or the nut, whichever
is smaller
tp = 10 mm – Thickness

fu = 490.0 MPa – Ultimate strength

γM 2 = 1.25 – Safety factor

Shear resistance check (EN 1993-1-8 tab 3.4)

βp αv fub A
Fv,Rd = γM 2 =  60.3 kN ≥ V =  0.1 kN
where:
βp = 1.00 – Reducing factor

αv = 0.60 – Reducing factor

fub = 800.0 MPa – Ultimate tensile strength of the bolt

A = 157 mm2 – Tensile stress area of the bolt

γM 2 = 1.25 – Safety factor

6/9
Project:
Project no:
Author:

Bearing resistance check (EN 1993-1-8 tab 3.4)

k1 αb fu dt
Fb,Rd = γM 2 =  116.6 kN ≥ V =  0.1 kN
where:
e2 p2
k1 = min(2.8 − 1.7, 1.4 − 1.7, 2.5) = 2.50 – Factor for edge distance and bolt spacing perpendicular to
d0 d0 the direction of load transfer
e2 = 40 mm – Distance to the plate edge perpendicular to the shear force

p2 = ∞ mm – Distance between bolts perpendicular to the shear force

d0 = 18 mm – Bolt hole diameter

e1 p1 1 fub – Factor for end distance and bolt spacing in direction of load
αb = min( , − , , 1) = 0.74 transfer
3d0 3d0 4 fu
e1 = 40 mm – Distance to the plate edge in the direction of the shear force

p1 = ∞ mm – Distance between bolts in the direction of the shear force

fub = 800.0 MPa – Ultimate tensile strength of the bolt

fu = 490.0 MPa – Ultimate strength

d = 16 mm – Nominal diameter of the fastener

t = 10 mm – Thickness of the plate

γM 2 = 1.25 – Safety factor

Interaction of tension and shear (EN 1993-1-8 tab 3.4)

Fv,Ed Ft,Ed
Utts = Fv,Rd + 1.4Ft,Rd =  1.5 %

Utilization in tension
Ft,Ed
Utt = min(Ft,Rd ;Bp,Rd ) =  1.8 %

Utilization in shear
VEd
Uts = min(Fv,Rd ;Fb,Rd ) =  0.2 %

Welds (Plastic redistribution)

Throat th. Length σw,Ed εPl σ⏊ τ|| τ⏊ Ut Utc
Item Edge Loads Status
[mm] [mm] [MPa] [%] [MPa] [MPa] [MPa] [%] [%]
B-w 1 FP1 ◢3.0◣ 220 LE-MC1 33.1 0.0 -13.5 13.1 11.6 7.6 1.7 OK
◢3.0◣ 220 LE-MC1 29.9 0.0 -7.7 -13.6 -9.7 6.9 1.9 OK
SPL1 RIB1 ◢4.0◣ 85 LE-MC1 5.5 0.0 2.7 -0.6 2.7 1.3 1.0 OK
◢4.0◣ 85 LE-MC1 5.1 0.0 2.4 0.5 -2.5 1.2 0.9 OK
B-w 1 RIB1 ◢4.0◣ 124 LE-MC1 13.9 0.0 -7.3 1.4 -6.7 3.2 1.0 OK
◢4.0◣ 124 LE-MC1 12.4 0.0 -5.3 -2.6 6.0 2.9 1.2 OK

7/9
 Project:
Project no:
Author:

Design data
βw σw,Rd 0.9 σ
[-] [MPa] [MPa]
S 355 0.90 435.6 352.8

Symbol explanation
εPl Strain
σw,Ed Equivalent stress
σw,Rd Equivalent stress resistance
σ⏊ Perpendicular stress
τ|| Shear stress parallel to weld axis
τ⏊ Shear stress perpendicular to weld axis
0.9 σ Perpendicular stress resistance - 0.9*fu/γM2
βw Corelation factor EN 1993-1-8 tab. 4.1
Ut Utilization
Utc Weld capacity utilization

Detailed result for B-w 1 FP1

Weld resistance check (EN 1993-1-8 4.5.3.2)
2 + 3(τ 2 + τ 2 )]0.5 = 
σw,Rd = fu /(βw γM 2 ) =  435.6 MPa ≥ σw,Ed = [σ⊥ ⊥ ∥ 33.1 MPa

σ⊥,Rd = 0.9fu /γM 2 =  352.8 MPa ≥ ∣σ⊥ ∣ =  13.5 MPa

where:
fu = 490.0 MPa – Ultimate strength
βw = 0.90 – appropriate correlation factor taken from Table 4.1
γM 2 = 1.25 – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
w,Rd
; σ⊥,Rd ) =  7.6 %

Code settings
Item Value Unit Reference
γM0 1.00 - EN 1993-1-1: 6.1
γM1 1.00 - EN 1993-1-1: 6.1
γM2 1.25 - EN 1993-1-1: 6.1
γM3 1.25 - EN 1993-1-8: 2.2
γC 1.50 - EN 1992-1-1: 2.4.2.4
γInst 1.20 - EN 1992-4: Table 4.1
Joint coefficient βj 0.67 - EN 1993-1-8: 6.2.5
Effective area - influence of mesh size 0.10 -

8/9
Project:
Project no:
Author:

Item Value Unit Reference

Friction coefficient - concrete 0.25 - EN 1993-1-8
Friction coefficient in slip-resistance 0.30 - EN 1993-1-8 tab 3.7
Limit plastic strain 0.05 - EN 1993-1-5
Weld stress evaluation Plastic redistribution
Detailing No
Distance between bolts [d] 2.20 - EN 1993-1-8: tab 3.3
Distance between bolts and edge [d] 1.20 - EN 1993-1-8: tab 3.3
Concrete breakout resistance check Both EN 1992-4: 7.2.1.4 and 7.2.2.5
Use calculated αb in bearing check. Yes EN 1993-1-8: tab 3.4
Cracked concrete Yes EN 1992-4
Local deformation check No CIDECT DG 1, 3 - 1.1
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Geometrical nonlinearity (GMNA) Yes Analysis with large deformations for hollow section joints
Braced system No EN 1993-1-8: 5.2.2.5

9/9