USB UV CAMERA

EHEV3-USBUV

USER’S GUIDE
INTRODUCTION
FUNCTIONS AND APPLICATIONS
The USB UV CAMERA is a new electronic product for the micro object
observation under lightings both while and ultraviolet (UV). It is a tubular
imaging system consisting of an optical lens, an image sensor, two groups
illumination mechanism, white light LED and UV light LED, and an image
transfer control circuit connected to a computer. You can display the images
captured by the USB UV CAMERA on the computer screen, store them on
the computer, print them, or send them over the Internet.

APPLICATIONS
 Inspection of industrial parts
 Dermatology
 Quality control
 Engineering teleconference
 Research and analysis
 Science learning
As a USB microscope, it can magnify stamps, coins, antiques, insects,
electric circuits, machines, hair, skin, fabrics, food, decorations, etc.
ATTENTION
Before installation and use of this product, please read the instructions in this
manual to ensure its correct use.

SAFETY INSTRUCTIONS
Before using this product, please carefully read the following safety
instructions.
1. The socket that the computer is plugged in must be properly grounded,
as the computer supplies power to this product. If in any doubt, please have a
professional electrician check and verify the grounding to ensure safety.
2. Never use this product in stormy weather.
3. This product contains delicate and precision components. Be gentle
when using it and avoid harsh handling or excessive force that may cause
damage to the product.
4. The temperature of the handle increases slightly during use and it feels a
little warm. This is normal. If the product is overheated and hot to the touch,
immediately cut off the power and contact us for repair.
5. Never leave the product on unattended. Unplug from the USB port after
use.
6. Do not disassemble this product. Disassembling this product will result in
irreparable damage. The company is not responsible for damage resulting
from disassembly of the product by the user. In case of any difficulties in
using the product, please contact us.
7. Never give this product to a child to use or play. Keep this product out of
reach of children.
8. Do not let this product come in direct contact with steam, vapor, water, or
liquids of any kind. Such contact can cause irreparable damage that is not
covered by warranty.
9. When not in use, store it in a tightly sealed box to avoid moisture and
decay. Damages resulting from improper storage are not covered by the
warranty.
10. Never use the UV light of this product for eye observation.
11. The cable with this product has been strictly tested. To ensure safe use,
do not replace it.
SYSTEM REQUIREMENTS
For best picture quality, the following specifications are recommended:
1. Windows XP, Vista, Windows 7 or MAC version 10.4.2 to 10.5.2
2. 128M RAM or above
3. At least 2 USB port (For best effect, USB 2.0 port is recommended).
4. CD-ROM and a 40G or higher hard disc.

TECHNICAL SPECIFICATIONS
1. DSP: Digital Image Monarch Processor.
2. Sensor: high-quality CMOS sensor, 2M pixels
3. Resolution: 1600×1200
4. Interface: USB2.0.
5. Frame rate: 30 frames/sec (CIF and VGA).
6. UV excitation wavelength 375nm
7. Magnification: 50×
8. Size: 32mm in diameter, 92mm in length
9. USB cable length: 1.8 meters
10. Image freeze: just rap space bar
11. Timing snap: 10 seconds
PACKING:
SIZE 18.5 X 12.5 X 7cm
GIFT BOX QTY. 1 PC
WEIGHT 0.4Kg
SIZE 36 X 40 X 26 cm
CARTON QTY. 20 PCS
WEIGHT 9.5Kg

INSTALLATION
To avoid mistakes in the installation process, please strictly follow these
steps:
Place the included CD into the CD-ROM drive.
Find the icon of ‘ehe.exe’.
Copy the ‘ehe.exe’ to your PC. Just copy but never try to install it.
Plug the HANDHELD MICROSCOPE into the USB port, and double click on
the icon of ‘ehe.exe’ to open the image window.

DIRECTIONS FOR USE

Properly connect the USB UV CAMERA to the computer . After a short while
you should see the image captured by the USB UV CAMERA on the
computer monitor.

OPEN IMAGE WINDOW

Double click on the icon ‘ehe.exe’
to open an image window on the
screen. After a few seconds the
camera will begin to take image
in the window. If the picture came
from your PC camera or any other
device please click on ‘Device’ on
the top line of the image window and open the pull down menu. Choose the
proper USB camera and close the pull down menu.
 Click on ‘OPTIONS’ and click on
‘VIDEO CAPTURE PIN’. Click one
of image window size in the
drop-down menu and click on ‘OK’
to confirm.

FOCUSING
The focusing ring is at the handle of the USB UV
CAMERA. While the focusing ring is rotated it
adjusted the distance between lens and sensor
for getting the clear image.
Please keep the head of USB UV CAMERA
tightly and snugly touching the surface of the
object during the focusing and observation.

CHANGE LIGHTING
Push down the light button that is located close to
snap button to choose white light or UV light or
turn off the lighting.

WARNING
If there is no operation within 5 minutes the lighting will be
turn off automatically.
TAKE PHOTOS
Click on ‘option’ on the top of image window.
Then click on ‘ high resolution’ in the drop-down menu to
make sure there is tick mark here.
Close the drop-down menu.
Push down the button of the dimmer that located on the USB cable to freeze
an image.
Or click ‘snap’ on the top of image
window to take a photo.
The photos you have taken will be
saved in the computer and display
an icon on the screen.
If your system could not freeze an
image please follow steps to make it
works:
1, click on ‘file’ that is on the top of
image window.
2, click on the ‘set photo folder’
3, designate the folder you want to
save the photos
4, click OK to confirm

MORE WAYS TAKING PHOTOS

Click on ‘option’ on the top of image window.
Then click on ‘ high resolution’ in the drop-down menu to make sure there is
no tick mark here.
Close the drop-down menu.
Now you get below functions:
IMAGE FREEZ
Please rap the space bar for freezing an image.
If you want to save this image you can rap the return key for saving the image
as a photo.
Rap the space bar again to activate the image window.
TIMING SNAP
Rap the F5 key to arouse a timing snap.
The snap will be delayed 10 seconds after the key was rapped company with
beep per second.
If you could not get a clear photo by push down the snap button the timing
snap may be a help.
RETURN KEY SNAP
Just rap return key to take a photo.
WARNING
The top line of the image window will be blue color while it works properly. It
will be changed into light blue when user operates on background and the
snap function will be lost during this color.
Just click any where inside of the image window to change it back to blue.

TAKE VIDEOS
For taking a video:
1, click on ‘video capture’
2, click on ‘Set Time Limit’ and input how many seconds the video you want to
take and tick the ‘use time limit’
3, click on the ‘capture’ again
4, click on ‘start capture’
5, click on ‘OK’ to start to the record
The video will be taken and stopped automatically when time out.
The video is an AVI format.
APPLICATION PHOTOS
LIMITATIONS AND EXCLUSIONS
Please keep all the receipts of your purchase in a safe place. You need to
produce the unaltered and original receipts to receive warranty coverage.
Otherwise, the warranty is voided.
The warranty only covers the product if it is used under normal operation
conditions. However, the following are not covered by the warranty:
Damages resulting from unauthorized disassembly or assembly of the
products by the customer
Damages caused by fitting of improper components to the product
Damages resulting from unauthorized attempts to repair or to alter the
product
Gross distortion, scratches, discoloration, or damage of the covering
Cracks, scratches, and mold spots on the lens
COMS sensor is burned or apparently scratched
Damages to the PCB board (such as burned PCB board) due to misuse

REPAIR SERVICE CARD

Product model:
Date of repair

Customer’s name
phone number

Description of faults

Place of repair

Results
WARRANTY CARD
Name of customer Address of customer

Purchase date Customer phone number

Product model Labeling of Sales Company

Serial number